LG Electronics USA SPT860 Speak USB/Hub User Manual Speaker 1EN final 2
LG Electronics USA Speak USB/Hub Speaker 1EN final 2
Users Manual
Test Report No.: GETET-E3-02-013 FCC Class B Certification APPENDIX H : USER’S MANUAL EUT Type: Speaker / USB HUB FCC ID : BEJSPT860 ENGLISH IBM T860 Speaker/USB HUB User Guide First Edition (May / 2002) Note : For important information, refer to the Monitor Safety and Warranty manual that comes with this monitor. This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or program(s) at any time. It is possible that this publication may contain reference to, or information about, IBM products (machines and programs), programming, or services that are not announced in your country. Requests for copies of this publication and for technical information about IBM products should be made to your IBM Authorized Dealer or IBM Retailer. No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from the International Business Machines Corporation. © Copyright International Business Machines Corporation 2002. All rights reserved. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp. Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program or service is not intended to state or imply that only IBM’s product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any of IBM’s intellectual property rights or other legally protectable rights may be used instead of the IBM product, program, or service. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by IBM, are the user’s responsibility. IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents. Trademarks The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States, other countries, or both: HelpCenter IBM ENERGY STAR is a U.S. Govt. registered trademark. Other company, product, and service names may be trademarks or service marks of others. Table of Contents Safety : Read First............................................................................A1 Connecting the Speaker..................................................................A2 Using the Audio Functions.......................................................A4 Side Jacks......................................................................................A4 Rear Panel Jacks............................................................................A4 Microphone Extension Operation..................................................A4 Audio Input...................................................................................A4 Front Panel Controls......................................................................A5 Audio Specifications .....................................................................A5 Using the USB (Universal Serial Bus) HUB Features................A6 Side Jacks......................................................................................A6 Rear Jack.......................................................................................A6 USB Connection ...........................................................................A7 USB Specifications ........................................................................A8 Service Information .................................................................A9 Service Information .......................................................................A9 Connecting the Speaker Before you connect the speaker to the monitor, be sure to turn off the monitor, computer and any devices attached to the computer. To connect the speaker, to the following: 1. Place the monitor in a convenient, well-ventilated location near your computer 2. system. Find the attachment points on the underside and the back of the monitor. Attach the speaker to the monitor as shown in the diagram. Using the hand screws provided. Bottom Slot Hook Figure 1. Power ON/OFF Switch Attach the speaker to the monitor and tighten the screws. Screw Figure 2. A2 Connecting the Speaker 3. Connect one end of the Power cable to the dc OUT jack on the rear panel of the monitor. Connect the other end to the dc IN jack b on the rear panel of the speaker option. Audio dc OUT Jack DC 12V IN Power Cable DC 12V IN dc IN Jack Figure 3. 4. Connect the Mic, Audio and USB cables as shown in the diagram. DC 12V IN USB Cable Audio Cable Mic Cable DC 12V IN Audio In Jack Mic Out Jack Figure 4. 5. After connecting the cables, Power on the computer monitor A , then the speaker. Power ON/OFF/volume control. A3 Using the Audio Functions This section provides information on the speaker audio functions. Side Jacks Microphone Jack An external microphone can be used instead of the preinstalled microphone. Headphone Jack A headphone jack that automatically mutes the speaker volume when headphones plugged in. Rear Panel Jacks Mic Out - Pink Connects to the microphone jack of the computer sound card. Audio In -Lime Green Connects to the *LINE OUT jack of the computer sound card. Microphone Extension Operation The Microphone Jacks on the Speaker/USB HUB Option provide a convenient way to extend the microphone input connector to your desktop. In order to use the MIC jack on the side of the Speaker/USB HUB Option, use the provided Microphone extender cable (pink connectors) to plug into the rear of the Speaker/USB HUB Option (MIC OUT) and into the MIC input jack of your sound card (if available). A microphone (that meets the requirements defined for your sound card) can then be plugged into the MIC jack on the side of the Speaker/USB HUB Option. Audio Input The Audio Input on the back of the Speaker/USB HUB Option should be connected to the Line Output jack on the computer system sound card using the provided cable (Lime Green connectors). The Speaker/USB HUB Option has a built-in amplifier (Amp). If the Audio Out of computer sound card has only Speaker Out, reduce the volume control on the computer system. NOTE If the Audio Out of the computer supports both Speaker Out and Line Out, Please use the Line Out function (For more information, refer to the documentation that comes with your computer). A4 Using the Audio Functions Front Panel Controls Control Function Power ON/OFF and Use to turn on/off audio and used to adjust volume. Volume Control Indicator The light-emitting diode (LED) is turned on for the speaker power ON and is turned off for the speaker power OFF. Audio Specifications Audio dc Input Voltage RMS Audio Output Input Sensitivity Speaker Impedance A5 dc 12 V 1W + 1W (Right + Left) 0.7 Vrms 4Ω Using the USB (Universal Serial Bus) HUB Featuers Universal Serial Bus (USB) is an innovation that conveniently connects different devices to your computer. USB enables you to have the flexibility to connect your mouse, keyboard, and other devides to the monitor instead of the computer. The Speaker/USB HUB Option provides a 4 port USB HUB that will enabel you to connect a chain of up to 120 devices on a single USB connection. You can “hot-plug” USB devices, that is, you can attach the devices while the computer is on. You can also disconnect USB devices while maintaining “Plug and Play” auto detection and configuration. This monitor comes with an intergrated BUS-power USB hub that can have up to four other USB devices attached to it. The Speaker/USB HUB Option has an intergrated BUS-powered HUB that meets the USB 2.0 Specification for Full Speed Devides, allowing up to 4 low power (<100 mA each) USB devices to be attached. Side Jacks USB HUB Jacks External USB 1.1 low power devices such as keyboards and mice can be connected to these ports. Rear Jack USB Devices Jack Connects the USB HUB to the computer system Downstream port. A6 Using the USB (Universal Serial Bus) HUB Featuers Connecting USB devices 1. Insert the USB cable into the square USB connector of the Speaker/USB HUB Option as shown is the diagram on the left. Then, insert the other end of the USB cable into the rectangular USB connector on a USB-compliant computer or USB hub as shown in the diagram on the right. 2. Insert the USB cable for USB-compliant devices into the rectangular USB connector in the monitor as shown in the diagram on the right. This is a simplified representation of the rear view. This is a simplified representation of the side view. USB downstream Ports connect the cables from USBcompliant peripherals-such as keyboard, mouse, etc To USB downstream port of the USB-compliant computer or another hub cable Notes : To activate the USB hub function, the Speaker/USB HUB Option must be connected to a USB compliant computer (OS) or another hub with the USB cable(enclosed). When connecting the USB cable, check that the shape of the connector at the cable side matches the shape at the connecting side. High powered devices (such as stand alone scanners and camera’s etc.) can not be connected to the USB HUB ports. Self powered devices (use an extermal AC adapter to meet the high power repuirement) can be connected to the USB HUB port. The USB HUB is compliant to the USB 2.0 Specification and will support low speed and full speed devices (same as USB 1.1). The HUB can not support high speed devices and will connect them as full speed devices. A7 Using the USB (Universal Serial Bus) HUB Featuers USB Specifications USB standard Downstream power supply Communication speed USB port Rev. 1.1 Compliant BUS-powered hub 100 mA for each (maximum) 12 Mbps (full), 1.5 Mbps (low) 1 Upstream port / 4 Downstream ports IMPORTANT: These USB connectors are not designed for use with high-power USB devices such as a video camera, scanner, etc. For optimal performance, connecting high-power USB devices directly to the computer. A8 Service Information Service Information The following parts are for use by IBM services, or IBM authorized dealers, to support customer warranty. Parts are for service use only. PART NUMBER FRU PART NUMBER DESCRIPTION 19K1901 19K1902 N/A 24P0556 24P0557 19K1903 Speaker/USB HUB Option Speaker/USB HUB Option Cable set A9 MODEL COLOR Stealth Black Pearl White
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:04:23 17:47:58Z Modify Date : 2002:04:28 11:16:25-06:00 Page Count : 13 Creation Date : 2002:04:23 17:47:58Z Producer : Acrobat Distiller 4.0 for Macintosh Author : 3333 Mod Date : 2002:04:28 11:16:25-06:00 Metadata Date : 2002:04:28 11:16:25-06:00 Creator : 3333 Title : Speaker-1EN_final-2EXIF Metadata provided by EXIF.tools