LG Electronics USA VX8610-DC Bluetooth Handsfree DTC User Manual Layout 1

LG Electronics USA Bluetooth Handsfree DTC Layout 1

UserManual.wiki >

LG Electronics USA >

VX8610 DC User Manual HTML Version

Manual

Read these simple guidelines. Breaking the rules may be dangerous

or illegal. Further detailed information is given in this user guide.

Violation of the instructions may cause serious injury or death.

●Never use an unapproved battery since this could

damage the phone and/or battery and could cause

the battery to explode.

●Never place your phone in a microwave oven as it will

cause the battery to explode.

●Never store your phone in temperatures less than

-4°F or greater than 122°F.

●Do not dispose of your battery near fire or with

hazardous or flammable materials.

●When riding in a car,do not leave your phone or set

up the hands-free kit near the air bag. If wireless

equipment is improperly installed and the air bag is

deployed, you may be seriously injured.

●Do not use a hand-held phone while driving.

●Do not use the phone in areas where its use is

prohibited. (For example: aircraft)

Important Safety Precautions

●Do not expose the battery charger or adapter to direct

sunlight or use it in places with high humidity, such as

abathroom.

●Do not use harsh chemicals (such as alcohol,

benzene, thinners, etc.) or detergents to clean your

phone. This could cause a fire.

●Do not drop, strike, or shake your phone severely. It

may harm the internal circuit boards of the phone.

●Do not use your phone in high explosive areas as the

phone may generate sparks.

●Do not damage the power cord by bending, twisting,

pulling, or heating. Do not use the plug if it is loose as

it may cause electric shock or fire.

●Do not place any heavy items on the power cord. Do

not allow the power cord to be crimped as it may

cause electric shock or fire.

●Do not handle the phone with wet hands while it is

being charged. It may cause an electric shock or

seriously damage your phone.

●Do not disassemble the phone.

●Do not place or answer calls while charging the

phone as it may short-circuit the phone and/or cause

electric shock or fire.

●Do not hold or let the antenna come in contact with

your body during a call.

●Make sure that no sharp-edged items, such as

animal’s teeth or nails, come into contact with the

battery. This could cause a fire.

●Store the battery out of reach of children.

●Be careful that children do not swallow any parts

(such as earphone, connection parts of the phone,

etc.) This could cause asphyxiation or suffocation

resulting in serious injury or death.

●Unplug the power cord and charger during lightning

storms to avoid electric shock or fire.

●Only use the batteries and chargers provided by LG.

The warranty will not be applied to products provided

by other suppliers.

●Only authorized personnel should service the phone

and its accessories. Faulty installation or service may

result in accidents and consequently invalidate the

warranty.

●An emergency call can be made only within a service

area. For an emergency call, make sure that you are

within a service area and that the phone is turned on.

Table of Contents

Important Safety Precautions .1

Welcome . . . . . . . . . . . . . . . . . . . .8

Technical Details . . . . . . . . . . . . .9

Important Information . . . . . . . . . . . .9

Information to User . . . . . . . . . . . . .9

Phone Overview . . . . . . . . . . . .12

Rear view . . . . . . . . . . . . . . . . . . . . . . .13

Installing the Battery . . . . . . . . . . . . .14

Removing the Battery . . . . . . . . . . .14

Detaching the Bluetooth Headset

Cavity Cover . . . . . . . . . . . . . . . . . . .14

Attaching the Bluetooth Headset . .14

Detaching the Bluetooth Headset . .14

Attaching the Bluetooth Headset

Cavity Cover . . . . . . . . . . . . . . . . . . .14

Center Select Key/ Directional Key .14

Menus Overview . . . . . . . . . . . .15

Menu Access . . . . . . . . . . . . . . . . . . .17

Getting Started with Your

Phone . . . . . . . . . . . . . . . . . . . . . .18

Charging the Battery . . . . . . . . . . . .18

Charging with USB . . . . . . . . . . . . . .18

Battery Temperature Protection . . .18

BatteryCharge Level . . . . . . . . . . . .19

Signal Strength . . . . . . . . . . . . . . . . .19

Turning the Phone On and Off . . . .19

Turning the Phone On . . . . . . . . . .19

Turning the Phone Off . . . . . . . . . .19

Making Calls . . . . . . . . . . . . . . . . . . .19

Correcting Dialing Mistakes . . . . . .20

Redialing Calls . . . . . . . . . . . . . . . . . .20

Receiving Calls . . . . . . . . . . . . . . . . . .20

Screen Icons . . . . . . . . . . . . . . . . . . . .20

Quick Access to Convenient

Features . . . . . . . . . . . . . . . . . . . .21

Vibrate Mode . . . . . . . . . . . . . . . . . . .21

Mute Function . . . . . . . . . . . . . . . . . . .21

Volume Quick Adjustment . . . . . . . .21

Call Waiting . . . . . . . . . . . . . . . . . . . . .21

Caller ID . . . . . . . . . . . . . . . . . . . . . . . .21

Voice Commands . . . . . . . . . . . . . . . .21

Entering and Editing

Information . . . . . . . . . . . . . . . . .22

Text Input . . . . . . . . . . . . . . . . . . . . . . .22

Contacts in Your Phone’s

Memory . . . . . . . . . . . . . . . . . . . .23

Storing Basics . . . . . . . . . . . . . . . . . .23

Customizing Individual Entries . . . .23

Speed Dial . . . . . . . . . . . . . . . . . . . . . .23

Storing a Number with Pauses . . .24

Adding Another Phone Number . .24

Changing the Default Number . . . .25

Deleting . . . . . . . . . . . . . . . . . . . . . . . .25

Speed Dialing . . . . . . . . . . . . . . . . . . .26

CONTACTS . . . . . . . . . . . . . . . . . . . .27

1. New Contact . . . . . . . . . . . . . . . . . .27

2. Contact List . . . . . . . . . . . . . . . . . . .27

3. Groups . . . . . . . . . . . . . . . . . . . . . . .28

4. Speed Dials . . . . . . . . . . . . . . . . . . .28

5. In Case of Emergency (ICE) . . . .29

6. My Name Card . . . . . . . . . . . . . . . .30

MESSAGING . . . . . . . . . . . . . . . . . .31

1. New Message . . . . . . . . . . . . . . . .31

1.1 TXT Message . . . . . . . . . . . . . . .31

1.2 Picture Message . . . . . . . . . . . .33

1.3 Video Message . . . . . . . . . . . . .35

1.4 Voice Message . . . . . . . . . . . . . .36

2. Inbox . . . . . . . . . . . . . . . . . . . . . . . .37

3. Sent . . . . . . . . . . . . . . . . . . . . . . . . .38

4. Drafts . . . . . . . . . . . . . . . . . . . . . . . .39

5. Voicemail . . . . . . . . . . . . . . . . . . . .40

6. Mobile IM . . . . . . . . . . . . . . . . . . . .40

7. Email . . . . . . . . . . . . . . . . . . . . . . . . .40

8. Chat . . . . . . . . . . . . . . . . . . . . . . . . .41

MSG Settings . . . . . . . . . . . . . . . . . . .41

1. Entry Mode (Word/ Abc/ ABC/

123) . . . . . . . . . . . . . . . . . . . . . . . . .41

2. Auto Save (On/ Off/ Prompt) . . .41

3. Auto Erase (On/ Off) . . . . . . . . . .41

4. TXT Auto View (On/Off) . . . . . . .41

5. TXT Auto Play (On/Off) . . . . . . . .41

6. Pic-Video Auto Receive (On/Off) 41

7. Quick Text . . . . . . . . . . . . . . . . .42

8. Voicemail # . . . . . . . . . . . . . . . . .42

9. Callback # . . . . . . . . . . . . . . . . . .42

0. Signature (None/ Custom) . . . . .42

Erasing Messages . . . . . . . . . . . . . . .42

RECENT CALLS . . . . . . . . . . . . . . . .43

1. Missed . . . . . . . . . . . . . . . . . . . . . . .43

2. Received . . . . . . . . . . . . . . . . . . . . .43

3. Dialed . . . . . . . . . . . . . . . . . . . . . . . .44

4. All . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

5. View Timers . . . . . . . . . . . . . . . . . . .45

CALCULATOR . . . . . . . . . . . . . . . . .45

MEDIA CENTER . . . . . . . . . . . . . . . .46

1. Music & Tones . . . . . . . . . . . . . . . .46

1.1 V CAST Music . . . . . . . . . . . . . .46

1.2 Get New Ringtones . . . . . . . . . .47

1.3 My Ringtones . . . . . . . . . . . . . . .47

1.4 My Music . . . . . . . . . . . . . . . . . .48

Playing Your Music . . . . . . . . . . . . . .48

Exit From the Music Player . . . . . . .48

1.5 My Sounds . . . . . . . . . . . . . . . . .48

1.6 Sync Music . . . . . . . . . . . . . . . . .49

2. Picture & Video . . . . . . . . . . . . . . .51

2.1 V CAST Videos . . . . . . . . . . . . . .51

2.2 Get New Pictures . . . . . . . . . . . .53

2.3 My Pictures . . . . . . . . . . . . . . . .53

2.4 My Videos . . . . . . . . . . . . . . . . . .54

2.5 Take Picture . . . . . . . . . . . . . . . .55

2.6 Record Video . . . . . . . . . . . . . .55

2.7 Online Album . . . . . . . . . . . . . . .56

3. Games . . . . . . . . . . . . . . . . . . . . . . . .56

4. Mobile Web . . . . . . . . . . . . . . . . . .56

5. Browse & Download . . . . . . . . . .58

6. Extras . . . . . . . . . . . . . . . . . . . . . . . .58

EMAIL . . . . . . . . . . . . . . . . . . . . . . . . .59

MOBILE IM . . . . . . . . . . . . . . . . . . . .59

VZ NAVIGATOR . . . . . . . . . . . . . . . .60

SETTINGS & TOOLS . . . . . . . . . . . .61

1. My Verizon . . . . . . . . . . . . . . . . . . . .61

2. Tools . . . . . . . . . . . . . . . . . . . . . . . . .61

2.1 Voice Commands . . . . . . . . . . . .61

2.1.1 Call <Name or Number> . . .62

2.1.2 Send Msg to <Name or

Table of Contents

Number> . . . . . . . . . . . . . . . . . . . . .62

2.1.3 Go to <Menu> . . . . . . . . . . .62

2.1.4 Check <Item> . . . . . . . . . . . .62

2.1.5 Contacts <Name> . . . . . . . .62

2.1.6 My Verizon . . . . . . . . . . . . . . .62

2.1.7 Help . . . . . . . . . . . . . . . . . . . .62

2.2 Calculator . . . . . . . . . . . . . . . . . .63

2.3 Ez Tip Calculator . . . . . . . . . . . . .63

2.4 Calendar . . . . . . . . . . . . . . . . . . .63

2.5 Alarm Clock . . . . . . . . . . . . . . . .64

2.6 Stopwatch . . . . . . . . . . . . . . . . . .65

2.7 World Clock . . . . . . . . . . . . . . . .65

2.8 Notepad . . . . . . . . . . . . . . . . . . .65

2.9 USB Mass Storage . . . . . . . . . .66

3. Bluetooth® Menu . . . . . . . . . . . .66

3.1 Add New Device . . . . . . . . . . . .67

My Device Name . . . . . . . . . . . . . . .69

Turn On . . . . . . . . . . . . . . . . . . . . . . .69

Discovery Mode . . . . . . . . . . . . . . . .70

Supported Profiles . . . . . . . . . . . . . .70

Last Search . . . . . . . . . . . . . . . . . . . .71

Auto Pair Handsfree . . . . . . . . . . . . .71

3.2 Decoy Headset Wizard . . . . . . .72

4. Sounds Settings . . . . . . . . . . . . . . .74

4.1 Master Volume . . . . . . . . . . . . .74

4.2 Call Sounds . . . . . . . . . . . . . . . .74

4.2.1 Call Ringtone . . . . . . . . . . .74

4.2.2 Call Vibrate . . . . . . . . . . . . .74

4.3 Alert Sounds . . . . . . . . . . . . . . . .75

4.4 Keypad Volume . . . . . . . . . . . . .75

4.5 Service Alerts . . . . . . . . . . . . . .75

4.6 Power On/Off..............76

4.7 Voice Clarity . . . . . . . . . . . . . . . .76

5. Display Settings . . . . . . . . . . . . . . .76

5.1 Banner . . . . . . . . . . . . . . . . . . .76

5.1.1 Personal Banner . . . . . . . . .76

5.1.2 ERI Banner . . . . . . . . . . . . .77

5.2 Backlight . . . . . . . . . . . . . . . . . .77

5.3 Wallpaper . . . . . . . . . . . . . . . . . .77

5.4 Display Themes . . . . . . . . . . . . .78

5.5 Main Menu Settings . . . . . . . . .78

5.6 Font Size . . . . . . . . . . . . . . . . . . .78

5.7 Clock Format . . . . . . . . . . . . . . .79

6. Phone Settings . . . . . . . . . . . . . . .79

6.1 Standalone Mode . . . . . . . . . . .79

6.2 Set Shortcuts . . . . . . . . . . . . . . .79

6.2.1 Set My Shortcuts . . . . . . . . .79

6.2.2 Set Directional Keys . . . . . . .80

6.3 Voice Commands . . . . . . . . . . . .80

6.4 Language . . . . . . . . . . . . . . . . . .80

6.5 Location . . . . . . . . . . . . . . . . . . .81

6.6 Security . . . . . . . . . . . . . . . . . . .81

6.6.1 Edit Codes . . . . . . . . . . . . .81

6.6.2 Restrictions . . . . . . . . . . . .82

6.6.3 Phone Lock . . . . . . . . . . . .82

6.6.4 Lock Phone Now . . . . . . . .83

6.6.5 Reset Default . . . . . . . . . .83

6.6.6 RestorePhone . . . . . . . . . .83

6.7 System Select . . . . . . . . . . . . . .84

6.8 NAM Select . . . . . . . . . . . . . . . .84

6.9 Auto NAM . . . . . . . . . . . . . . . . . .84

7. Call Settings . . . . . . . . . . . . . . . . . .85

7.1 Answer Options . . . . . . . . . . . . .85

7.2 End Call Options . . . . . . . . . . . . .85

7.3 Auto Retry . . . . . . . . . . . . . . . . . .86

7.4 TTY Mode . . . . . . . . . . . . . . . . .86

7.5 One Touch Dial . . . . . . . . . . . . .87

7.6 Voice Privacy . . . . . . . . . . . . . . . .88

7.7 DTMF Tones . . . . . . . . . . . . . . . .88

8. USB Auto Detection . . . . . . . . . . .88

9. Memory . . . . . . . . . . . . . . . . . . . . . .89

9.1 Save Options . . . . . . . . . . . . . . .89

9.2 Phone Memory . . . . . . . . . . . . .89

9.3 Card Memory . . . . . . . . . . . . . .90

0. Phone Info . . . . . . . . . . . . . . . . . . . .90

0.1 My Number . . . . . . . . . . . . . . . .90

0.2 SW/HW Version . . . . . . . . . . . . .90

0.3 Icon Glossary . . . . . . . . . . . . . . .90

0.4 Software Update . . . . . . . . . . . .91

How to Use the Decoy Bluetooth®

Headset . . . . . . . . . . . . . . . . . . . . . . .92

Charging time . . . . . . . . . . . . . . . . . . .96

LED indication . . . . . . . . . . . . . . . . . . .96

Summary of button functions . . . . .97

How to multi-connection with

Handset . . . . . . . . . . . . . . . . . . . . . . .98

DTC Overview . . . . . . . . . . . . . . . .102

Safety . . . . . . . . . . . . . . . . . . . . .106

TIA Safety Information . . . . . . . . .106

Exposure to Radio Frequency

Signal . . . . . . . . . . . . . . . . . . . . . . .106

Antenna Care................106

Phone Operation . . . . . . . . . . . . . .106

Tips on Efficient Operation . . . . . .107

Driving . . . . . . . . . . . . . . . . . . . . . .107

Electronic Devices . . . . . . . . . . . .107

Pacemakers . . . . . . . . . . . . . . . . .107

Hearing Aids . . . . . . . . . . . . . . . . .108

Other Medical Devices . . . . . . . .108

Health Care Facilities . . . . . . . . . .108

Vehicles . . . . . . . . . . . . . . . . . . . . .108

Posted Facilities . . . . . . . . . . . . . .108

Aircraft . . . . . . . . . . . . . . . . . . . . . .108

Blasting Areas . . . . . . . . . . . . . . . .108

Potentially Explosive Atmosphere108

For Vehicles Equipped with an Air

Bag . . . . . . . . . . . . . . . . . . . . . . . .109

Safety Information . . . . . . . . . . . .109

Charger and Adapter Safety . . . .110

Battery Information and Care . . .110

Explosion, Shock, and Fire

Hazards . . . . . . . . . . . . . . . . . . . . .111

General Notice . . . . . . . . . . . . . . .111

Caution: Avoid potential hearing

loss. . . . . . . . . . . . . . . . . . . . . . . . . . .113

FDA Consumer Update . . . . . . . .115

10 Driver Safety Tips . . . . . . . . . . .122

Consumer Information on SAR .125

FCC Hearing-Aid Compatibility

(HAC) Regulations for Wireless

Devices . . . . . . . . . . . . . . . . . . . . . .126

Accessories . . . . . . . . . . . . . . .129

LIMITED WARRANTY

STATEMENT . . . . . . . . . . . . . .130

Glossary . . . . . . . . . . . . . . . . . . .133

Terminology . . . . . . . . . . . . . . . . . .133

Acronyms and Abbreviations . .133

Welcome

Thank you for choosing the

cellular phone designed

to operate with the latest digital

mobile communication technology,

Code Division Multiple Access

(CDMA). Along with the many

advanced features of the CDMA

system, such as greatly enhanced

voice clarity, this compact phone

offers:

●VCASTSM Music and Video

Capability

●microSD™ expansion slot

●Built-in 2.0 Megapixel digital

camera

●Mobile Web 2.0

●Sleek and Compact Design

●Large, easy-to-read, 8-line

backlit LCD with status icons

●Media Center capable for game,

wallpaper and ringtone

downloads

●19-key keypad and Directional

Key

●Long battery standby and talk

time

●Easy operation using menu-

driven interface with prompts

●Paging, messaging, Voicemail,

caller ID, IM and chat

●Advanced Voice Recognition

●Quick calling functions including,

auto answer, auto retry, 999

speed dials, and voice

commands

●Flash Wallpaper with fun

animations

●Bilingual (English and Spanish)

Capability

●Bluetooth®wireless technology

(for certain profiles)

NOTE

The Bluetooth®word mark and logos

are owned by the Bluetooth SIG, Inc.

and any use of such marks by LG

Electronics is under license. Other

trademarks and trade names are

those of their respective owners.

NOTE

Find the interactive user guide on the

web for your convenience where you

can freely surf and interactively learn

how to use your phone step-by-step.

Go to http://www.verizonwireless.com

Support

Phones & Devices

then choose your phone model

then select Equipment Guide.

Important Information

This user’s guide provides important

information on the use and

operation of your phone. Please

read this guide carefully prior to

using the phone to be able to use

your phone to its greatest

advantage and to prevent any

accidental damage or misuse. Any

unapproved changes or

modifications will void your

warranty.

FCC Part 15 Class B Compliance

This device and its accessories

comply with part 15 of FCC rules.

Operation is subject to the following

two conditions: (1) This device and

its accessories may not cause

harmful interference, and (2) this

device and its accessories must

accept any interference received,

including interference that causes

undesired operation.

Information to User

This equipment has been tested

and found to comply with the limits

for a Class B digital device,

pursuant to part 15 of the FCC

Rules. These limits are designed to

provide reasonable protection

against harmful interference in a

residential installation.

This equipment generates, uses

and can radiate radio frequency

energy and, if not installed and

used in accordance with the

instructions, may cause harmful

interference to radio

communications.

However, there is no guarantee that

interference will not occur in a

particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be

determined by turning the

equipment off and on, the user is

encouraged to try to correct the

interference by one or more of the

following measures:

-Reorient or relocate the receiving

antenna

-Increase the separation between

the equipment and receiver

-Connect the equipment into an

outlet on a circuit different from

that which the receiver is

connected.

-Consult the dealer or an

experienced radio/TV technician

for help.

Modifications not expressly

approved by the manufacturer

could void the user’sauthority to

operated the equipment under FCC

rules.

Technical Details

The is an all digital phone

that operates on both Code Division

Multiple Access (CDMA)

frequencies: Cellular services at 800

MHz and Personal Communication

Services (PCS) at 1.9 GHz.

CDMA technology uses a feature

called DSSS (Direct Sequence

Spread Spectrum) that enables the

phone to keep communication from

Technical Details

being crossed and to use one

frequency channel by multiple

users in the same specific area.

This results in a 10-fold capacity

increase when compared with

analog mode. In addition, features

such as soft / softer handoff, hard

handoff, and dynamic RF power

control technologies combine to

reduce call interruptions.

The Cellular and PCS CDMA

networks consist of MSO (Mobile

Switching Office), BSC (Base

Station Controller), BTS (Base

Station Transmission System), and

MS (Mobile Station).

*TSB -74: Protocol between an IS-

95A system and ANSI J-STD-008

1xRTT system receives twice as

many subscribers in the wireless

section as IS-95. Its battery life is

twice as long as IS-95. High-speed

data transmission is also possible.

EV-DO system is optimized for data

service and is much faster than

1xRTT system in applicable area.

The following table lists some major

CDMA standards.

CDMA Standard

Designator Description

Basic Air

Interface

TIA/EIA-95A

TSB-74

ANSI J-STD-008

TIA/EIA-IS2000

CDMA Dual-Mode Air Interface

14.4kbps radio link protocol and

inter-band operations

IS-95 adapted for PCS frequency band CDMA2000

1xRTT Air Interface

Network

TIA/EIA/IS-634

TIA/EIA/IS/651

TIA/EIA/IS-41-C

TIA/EIA/IS-124

MAS-BS

PCSC-RS

Intersystem operations

Non-signaling data comm.

Service

TIA/EIA/IS-96-B

TIA/EIA/IS-637

TIA/EIA/IS-657

IS-801

TIA/EIA/IS-707-A

Speech CODEC

Short Message Service

Packet Data

Position Determination Service (gpsOne)

High Speed Packet Data

1x EV-DO

Related interface

TIA/EIA/IS-856

TIA/EIA/IS-878

TIA/EIA/IS-866

TIA/EIA/IS-890

CDMA2000 High Rate Packet Data Air Interface

1xEV-DO Inter-Operability Specification for

CDMA2000 Access Network Interfaces

Recommended Minimum Performance Standards for

CDMA2000 High Rate Packet Data Access Terminal

Test Application Specification (TAS) for High Rate

Packet Data Air Interface

FCC RF Exposure Information

WARNING! Read this information

before operating the phone.

In August 1996, the Federal

Communications Commission (FCC)

of the United States, with its action

in Report and Order FCC 96-326,

adopted an updated safety standard

for human exposure to Radio

Frequency (RF) electromagnetic

energy emitted by FCC regulated

transmitters. Those guidelines are

consistent with the safety standard

previously set by both U.S. and

international standards bodies. The

design of this phone complies with

the FCC guidelines and these

international standards.

Bodily Contact During Operation

This device was tested for typical

use with the back of the phone kept

0.78 inches (2 cm) from the body. To

comply with FCC RF exposure

requirements, a minimum

separation distance of 0.78 inches

(2 cm) must be maintained between

the user’sbody and the back of the

phone, including the antenna,

whether extended or retracted.

Third-party belt-clips, holsters, and

similar accessories containing

metallic components should not be

used. Avoid the use of accessories

that cannot maintain 0.78 inches (2

cm) distance between the user’s

body and the back of the phone and

have not been tested for

compliance with FCC RF exposure

limits.

Vehicle-Mounted External Antenna

(Optional, if available.)

To satisfy FCC RF exposure

requirements, keep 8 inches (20 cm)

between the user / bystander and

vehicle-mounted external antenna.

For more information about RF

exposure, visit the FCC website at

www.fcc.gov.

Caution

Use only the supplied antenna. Use

of unauthorized antennas (or

modifications to the antenna) could

impair call quality, damage the

phone, void your warranty and/or

violate FCC regulations.

Don't use the phone with a

damaged antenna. A damaged

antenna could cause a minor skin

burn.

Contact your local dealer for a

replacement antenna.

Phone Overview

1. Camera Lens Keep it clean for optimal photo

quality.

2. Slide Use to make or answer calls. Slide up to

reveal the keypad to dial a number or answer

an incoming call. Slide it down to end the call.

3. LCD Screen Displays messages and indicator

icons.

4. Center Select Key / Directional Key This key is

amultifunctional "joystick-like" key. Use the

Center Select Key to select a field or

option, by pushing in. Use the Directional Key

to scroll through the menu items and

highlight a specific field or object by moving

up, down, left or right.

5. Left Soft Key Use to access Message menu.

6. Voice Commands Key Use for quick access to

Voice Commands.

7. Speakerphone Key Use to change to

speakerphone mode.

8. Side Keys / Volume keys Up/Down Use to

adjust the Master Volume in standby mode* and

the Earpiece Volume during a call.

9. SEND Key Use to make and answer calls.

10. Accessory Charger Port Connects the phone

to the battery charger,or other compatible

accessory.

11. International Call Prefix Key To make an

international call, press and hold for

2or 3 seconds. + is the international calling

code.

12. Earpiece Lets you hear the caller and

automated prompts.

2. Slide

8. Side Keys /

Volume keys Up/Down

14. Right Soft Key

3. LCD Screen

4. Center Select Key /

Directional Key

7. Speakerphone Key

5. Left Soft Key

6. Voice Commands Key

10. Accessory

Charger Port

12. Earpiece

9. SEND Key

20. microSD™ Slot

19. Vibrate Mode Key

1. Camera Lens

15. CLR Key

16. PWR/END Key

18. Alphanumeric Keypad

17. Camera Key

13. Headset Jack

*Standbymode is when the phone is waiting for input from you.

No menu is displayed and the phone isn’t performing any

action. It’s the starting point for all of the instruction steps.

This User Manual gives navigation instructions according to the

default "Grid" Menu Layout in the Display Settings menu. If other

themes or menus areset,navigating the phone's menus may be

different.

11. International Call Prefix Key

PWR/Call Button

Volume Up / Down

Button

Bluetooth®Headset

21. Microphone

Bluetooth Headset

Cavity Cover

13. Headset Jack Allows you to plug in an

optional headset for convenient, hands-free

conversations.

14. Right Soft Key Use to access Contacts menu.

15. CLR Key Deletes single spaces or characters

with a quick press, but press and hold to

delete entire words. Also backs out of menus,

one level at a time.

16. PWR / END Key Use to turn the power on/off

and to end a call. Also returns to standby

mode.

17. Camera Key Use for quick access to Camera

function. Press and hold the camera key to

record Video.

18. Alphanumeric Keypad Use to enter numbers

and characters and select menu items.

19. Vibrate Mode Key Use to set Vibrate mode

(from standby mode press and hold for about

3seconds).

20. microSD™ Slot Accommodates optional

microSD cards up to 8GB.

21. Microphone Allows other callers to hear you

clearly when you are speaking to them.

Rear view

TIP

If you hold the phone

enclosing the lower edge, you

may interfere with the antenna's

ability to receive a clear signal

which affects call quality for voice

or data transfer.

NOTE

Antenna equipped inside

your phone.

Camera Lens Battery

Battery Terminals

Holes for a

carrying strap

Bluetooth

Headset

BatteryCover

NOTES •

It’s important to fully charge the

battery before using the phone for

the first time.

•

Battery life and signal strength are

significant factors (among others)

that affect your phone’s ability to

send/receive calls.

Phone Overview

Installing the Battery

Remove the battery cover on the

back of the phone, insert the battery

into the opening by first aligning the

bottom of the battery with the

terminals near the center of the

phone. Gently press down until the

battery snaps into the place.

Removing the Battery

Turn power off, then slide the battery

cover off the phone.

Lift the edge of the battery out using

the fingertip cutout, then remove it.

Detaching the Bluetooth

Headset Cavity Cover

Simply press the

release latch on the

top of the phone, then

pull the Bluetooth

Headset Cavity Cover to detach from

the phone.

Attaching the Bluetooth Headset

Place the lower edge

of the Bluetooth

Headset into the slot,

then press towards

the phone until it

clicks into place.

Detaching the Bluetooth Headset

Simply press the release latch on the top

of the phone, then pull the Bluetooth

Headset to detach from the phone.

Attaching the Bluetooth Headset

Cavity Cover

Place the lower edge of the Bluetooth

Headset Cavity Cover into the slot, then

press towards the phone until it clicks

into place.

Center Select Key/ Directional

Key

Use the Center Select Key to

select a field or option, by pushing in.

Use the Directional Key to scroll

through the menu items and highlight a

specific field or object by moving up,

down, left or right.

CONT

ONTACTS

ACTS

1. New Contact

2. Contact List

3. Groups

4. Speed Dials

5. In Case of Emergency

6. My Name Card

MESSAGING

ESSAGING

1. New Message

2. Inbox

3. Sent

4. Drafts

5. Voicemail

6. Mobile IM

7. Email

8. Chat

RECENT

ECENT C

CALLS

ALLS

1. Missed

2. Received

3. Dialed

4. All

5. View Timers

CALCULA

ALCULATOR

TOR

MEDIA

EDIA C

CENTER

ENTER

1. Music & Tones

1. V CAST Music

2. Get New Ringtones

3. My Ringtones

4. My Music

5. My Sounds

6. Sync Music

2. Picture & Video

1. V CAST Videos

2. Get New Pictures

3. My Pictures

4. My Videos

5. Take Picture

6. Record Video

7. Online Album

3. Games

4. Mobile Web

5. Browse & Download

6. Extras

Menus Overview

Mobile IM

VZ Navigator

SETTINGS

ETTINGS & T

& TOOLS

OOLS

1. My Verizon

2. Tools

1. Voice Commands

2. Calculator

3. Ez Tip Calculator

4. Calendar

5. Alarm Clock

1. Alarm 1

2. Alarm 2

3. Alarm 3

6. Stopwatch

7. World Clock

8. Notepad

9. USB Mass Storage

3. Bluetooth Menu

1. Add New Device

2. Decoy Headset Wizard

4. Sounds Settings

1. Master Volume

2. Call Sounds

1. Call Ringtone

2. Call Vibrate

3. Alert Sounds

1. TXT Message

2. Pic/Video/Voice

Message

3. Voicemail

4. Emergency Tone

4. Keypad Volume

5. Service Alerts

1. ERI

2. Minute Beep

3. Call Connect

4. Charge Complete

6. Power On/Off

1. Power On

2. Power Off

7. Voice Clarity

5. Display Settings

1. Banner

1. Personal Banner

2. ERI Banner

2. Backlight

1. Display

2. Keypad

3. Wallpaper

1. My Pictures

2. My Videos

3. Fun Animations

4. Display Themes

5. Main Menu Settings

6. Font Size

7. Clock Format

6. Phone Settings

1. Standalone Mode

2. Set Shortcuts

3. Voice Commands

4. Language

5. Location

6. Security

1. Edit Codes

2. Restrictions

3. Phone Lock

4. Lock Phone Now

5. Reset Default

6. Restore Phone

7. System Select

8. NAM Select

9. Auto NAM

7. Call Settings

1. Answer Options

2. End Call Options

3. Auto Retry

4. TTY Mode

5. One Touch Dial

6. Voice Privacy

7. DTMF Tones

8. USB Auto Detection

Sync Music

Sync Data

Ask On Plug

9. Memory

1. Save Options

2. Phone Memory

3. Card Memory

0. Phone Info

1. My Number

2. SW/HW Version

3. Icon Glossary

4. Software Update

Some content in this user guide

may differ from your phone

depending on the phone

software. Features and

specifications are subject to

change without prior notice.

Menu Access

Press the Center Select Key

[MENU] to have access to

9phone menus.

Getting Started with Your Phone

Charging the Battery

1. Attach the charger to the phone.

Make sure that the LG symbol

faces down when inserting the

plug into the charger port.

2. Plug the charger into a wall

outlet.

NOTICE

Please use only an approved charging

accessory to charge your LG phone.

Improper handling of the charging port, as well

as the use of an incompatible charger, may

cause damage to your phone and void the

warranty.

Charging with USB

You can use your computer to

charge your phone. Connect one

end of a USB cable to the charging

accessory port on your phone and

the other end to a highpower USB

port on your PC (commonly located

on the front panel of the computer).

NOTE

Lower USB port is not supported,

such as the USB port on your

keyboard or bus-powered USB hub.

Battery Temperature Protection

If the battery gets overheated, the

phone will automatically turn off.

When you turn the phone back on,

amessage pops up alerting you

that the phone was powered off for

your safety.

NOTICE

LG symbol should face down.

(for both your charger and USB)

Battery Charge Level

You can find the battery charge

level at the top right of the

LCD screen. When the charge level

becomes low, the battery sensor

sounds a warning tone, blinks the

battery icon, and displays a

warning message. As the charge

level approaches empty,the phone

automatically switches off without

saving.

Signal Strength

Call quality depends on the signal

strength in your area. You can tell

how much signal strength you have

by the number of bars next to the

signal strength icon: the more bars,

the stronger the signal. If you’re

having problems with signal quality,

move to an open area or,when

inside a building, try moving near a

window.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or

connect the phone to an external

power source.

2. With the slide open, press

(located above the on the

keypad) until the LCD screen

lights up.

Turning the Phone Off

1. With the slide open, press and

hold until the display turns

off.

Making Calls

1. Make sure the phone is turned

on.

If not, with the slide open, press

for about three seconds.

If necessary, enter the lock code.

2. Enter the phone number.

3. Press .

4. Press to end the call.

NOTE

Your phone has a Voice Commands

feature that also lets you make calls

by phone number,name, or location.

Getting Started with Your Phone

Correcting Dialing Mistakes

With the slide open, press

once to erase the last digit entered,

or hold it down for at least two

seconds to delete all the digits.

Redialing Calls

1. With the slide open, press

twice to redial the last number

dialed.

Receiving Calls

1. When the phone rings or

vibrates, you can answer the call

by simply opening the slide. Or,if

you want to use the phone with

the slide closed, press the Right

Soft Key [Unlock],then

press the Center Select Key

[Answer].

NOTE

If you press the Left Soft Key

[Quiet] while the phone is ringing and

unlocked, the ringing or vibration is

muted for that call.

NOTE

If you press the Right Soft Key

[Ignore] while the phone is ringing

and unlocked, the call will end or go to

voicemail.

2. With the slide open, press

to end the call. If the slide is

closed, you may have to press

the Right Soft key to Unlock,

then you can press the Center

Select Key [End] to end the

call.

Screen Icons

When the phone is on, the top line

of the LCD screen displays phone

status icons.

Tosee the icon glossary,with the

slide open, go to MENU ->

SETTINGS & TOOLS -> Phone Info -

>Icon Glossary on your phone.

Vibrate Mode

Sets the phone to vibrate instead of

ring ( is displayed). To set

Vibrate Mode, with the slide open,

press and hold . To return to

Normal Mode, press and hold .

Mute Function

The Mute Function prevents the

transmission of your voice to the

caller.To quickly activate Mute

while in a call, press the Left Soft

Key [Mute],then to unmute

press the Left Soft Key

[Unmute].

Volume Quick Adjustment

Quickly adjust ringer and earpiece

volumes by pressing the upper side

key on the left side of the phone

to increase and lower key to

decrease.

NOTES •

The earpiece volume can only be

adjusted during a call and Key

Beep volume can only be adjusted

through the Menu.

•

To turn off sounds, press and hold

the lower side key for 3 seconds

when the slide is up, then press

and hold the upper side key to

return to normal sounds mode.

Call Waiting

During a call, one beep indicates

another incoming call.

With the slide open, press to

answer it and put the first call on

hold. Press again to return to

the first call.

Caller ID

Caller ID displays the number

and/or name of the person calling

when your phone rings.

Voice Commands

Voice Commands allow you to do

things by verbal command (e.g.,

make calls, confirm Voicemail, etc.).

With the slide open, press the Voice

Commands Key and follow the

prompts.

NOTE

Voice Commands can also be started

with the designated key on your

Bluetooth®device. Please check the

manual of the Bluetooth®device for

further instructions.

Quick Access to Convenient Features

Entering and Editing Information

Text Input

The following key functions are

available to help with text entry:

Left Soft Key:Press to

change text input mode.

Shift:Press to change case

(initial cap, caps lock,

lowercase).

Next:Press to display other

matching words in the

database in T9 mode.

Space:Press to complete a

word and insert a space.

Clear:Press to delete a

single space or character.

Hold to delete words.

Punctuation:Press to

insert punctuation.

Text Input Modes

In a text field, press the Left Soft

Key to display text modes.

Storing Basics

1. With the slide open, enter a

number (max. 48 digits), then

press the Left Soft Key

[Save].

2. Use the Directional Key to

highlight Add New Contact/

Update Existing,then press the

Center Select Key .

3. Use the Directional Key to

highlight Mobile 1/ Home/ Work/

Mobile 2/ Fax,then press the

Center Select Key .

4. Enter a name (max. 32

characters), then press the

Center Select Key .

5. Press to exit, to call, or

the Right Soft Key [Options].

Customizing Individual

Entries

1. With the slide open, press the

Right Soft Key [Contacts],

then use the Directional Key

to highlight an entry.

2. Press the Left Soft Key [Edit].

3. Use the Directional Key to

highlight the information to

customize.

4. Change the entry as you want,

then press the Center Select Key

to save your changes.

Speed Dial

Allows you to set up your Speed

Dials.

1. With the slide open, press the

Right Soft Key [Contacts],

then use the Directional Key

to highlight an entry.

2. Press the Left Soft Key

[Edit].

3. Use the Directional Key to

highlight a phone number,then

press the Right Soft Key

[Options].

4. Use the Directional Key to

highlight Set Speed Dial,then

press the Center Select Key .

5. Enter a Speed Dial digit.

●Use the keypad, then press the

Center Select Key .

●Use the Directional Key to

highlight the Speed Dial digit,

then press the Center Select

Key .

6. Press the Center Select Key

Yes to confirm, then press the

Center Select Key to save.

Contacts in Your Phone’s Memory

Storing a Number with

Pauses

Pauses allow you to enter

additional series of numbers to

access automated systems such as

Voicemail or credit billing numbers.

Pause types are: Wait (W) The

phone stops dialing until you press

the Left Soft Key [Release] to

advance to the next number. 2-Sec

Pause (P) The phone waits two

seconds before sending the next

string of digits.

1. With the slide open, enter the

number, then press the Right Soft

Key [Options].

2. Use the Directional Key to

highlight 2-Sec Pause/ Wait,then

press the Center Select Key .

3. Enter additional number(s) (e.g., pin

number,credit card number,etc.).

4. Press the Left Soft Key

[Save].

5. Continue entering information for

the Contact entry as necessary.

Adding Another Phone

Number

From standby mode

1. With the slide open, enter a

phone number, then press the

Left Soft Key [Save].

2. Use the Directional Key to

highlight Update Existing,then

press the Center Select Key .

3. Use the Directional Key to

highlight an existing entry,then

press the Center Select Key .

4. Use the Directional Key to

highlight Mobile 1/ Home/ Work/

Mobile 2/ Fax,then press the

Center Select Key to save.

From the Contact List Screen

1. With the slide open, press the

Right Soft Key [Contacts].

2. Use the Directional Key to

highlight an entry, then press the

Left Soft Key [Edit].

3. Use the Directional Key to

highlight the phone number field

to add, then enter the number

and press the Center Select Key

to save.

Changing Saved Information

To edit any information you stored,

access the Edit Contacts screen:

1. With the slide open, press the

Right Soft Key [Contacts].

2. Use the Directional Key to

highlight a Contact entry, then

press the Left Soft Key [Edit].

3. Use the Directional Key to

highlight the field you want to

change.

4. Make the changes, then press

the Center Select Key .

Adding a Pause to a Contact Entry

1. With the slide open, press the

Right Soft Key [Contacts].

2. Use the Directional Key to

highlight a Contact entry, then

press the Left Soft Key [Edit].

3. Use the Directional Key to

highlight the number,then press

the Right Soft Key [Options].

4. Press Wait or 2-Sec

Pause.

5. Enter additional number(s), then

press the Center Select Key .

Changing the Default

Number

The Default Number is the phone

number you entered when you

created the Contact. Another

number can be saved as the

Default Number.

1. With the slide open, press the

Right Soft Key [Contacts].

2. Use the Directional Key to

highlight an entry.

Press the Left Soft Key [Edit].

4. Use the Directional Key to

highlight a phone number,then

press the Right Soft Key

[Options].

5. Use the Directional Key to

highlight Set As Default,then

press the Center Select Key .

6. Press the Center Select Key

to set the new number as the

default.

Aconfirmation message is

displayed.

7. Press the Center Select Key

again to save.

Deleting

Deleting a Contact Entry

1. With the slide open, press the

Right Soft Key [Contacts].

Contacts in Your Phone’s Memory

2. Use the Directional Key to

highlight an entry.

3. Press the Right Soft Key

[Options].

4. Press Erase.

5. Press the Center Select Key Yes.

Deleting a Speed Dial

1. With the slide open, press the

Right Soft Key [Contacts].

2. Use the Directional Key to

highlight a Contact entry to edit

and press the Center Select Key

[VIEW].

3. Select the phone number with

the Speed Dial, then press the

Center Select Key [EDIT].

4. Press the Right Soft Key

[Options].

5. Press Remove Speed Dial.

6. Press the Center Select Key Yes.

7. Press the Center Select Key

again to save.

Speed Dialing

Allows you to make phone calls

quickly and easily to numbers

stored in Contacts.

NOTE

Speed Dial 1 is for Voicemail.

Speed Dial 411 is for Directory

Assistance.

Single Digit Speed Dials

Press and hold the Speed Dial digit.

Your phone recalls the phone

number from your Contacts,

displays it, and dials it for you.

Multiple Digit Speed Dials

When you press and hold a number

key, it signals the phone to attempt

aSpeed Dial transmission. Todial

Speed Dials with multiple digits,

press the first digit(s) as necessary,

then press and hold the last digit.

For example, to Speed Dial 25,

press , then press and hold

NOTE

You can also enter the Speed Dial

digit(s), then press .

Speed Dials 97, 98, and 99

Speed Dials 97, 98, and 99 are

preset to access certain phone

account information: 97 (#BAL), 98

(#MIN), and 99 (#PMT). Unlike

Speed Dial 1, these can be changed

if you want.

NOTE

211, 311, 611 or 911 No. is not

available for

View

Set

Remove

411 is not available for

Set

Remove

CONTACTS

The Contacts Menu allows you to

store names, phone numbers and

other information in your phone’s

memory.

SHORTCUT

Pressing the Right Soft Key

is a hot key to Contact List.

1. New Contact

Allows you to add a new number to

your Contact List.

NOTE

Using this submenu, the number is

saved as a new Contact, not into an

existing Contact.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Contacts.

3. Press New Contact.

4. Enter the name and press the

Directional Key downward.

5. Use the Directional Key to

highlight the phone number type.

6. Enter the number and press the

Center Select Key .

NOTE

For more detailed information, see

page 23.

2. Contact List

Allows you to view your Contact

List.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Contacts.

3. Press Contact List.

4. Use the Directional Key to

scroll through your Contacts

alphabetically.

●Press the Right Soft Key

[Options] to select one of the

following:

Call/ New Contact/ Erase/

New TXT Message/ New

Picture Message/ New Video

Message/ New Voice

Message/ Set As ICE Contact/

Erase All/ Send Name Card

●Press the Left Soft Key

[Edit] to edit.

CONTACTS

3. Groups

Allows you to view your grouped

Contacts, add a new group, change

the name of a group, delete a

group, or send a message to

everyone in the selected group.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Contacts.

3. Press Groups.

4. Use the Directional Key to

highlight a group to view then

press the Center Select Key .

●Before selecting group type

press the Left Soft Key

[New] to add a new group to

the list.

●Before selecting group type

press the Right Soft Key

[Options] to select one of the

following:

New TXT Message/ New

Picture Message/ New Video

Message/ New Voice

Message/ Rename/ Erase/

Add

●Before selecting group type

press the Center Select Key

[VIEW] to view the Group

information.

4. Speed Dials

Allows you to view your list of

Speed Dials or designate Speed

Dials for numbers entered in your

Contacts.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Contacts.

3. Press Speed Dials.

4. Use the Directional Key to

highlight the Speed Dial position,

or enter the Speed Dial digit and

press the Center Select Key

[SET].

5. Use the Directional Key to

highlight the Contact then press

the Center Select Key . (For

Contacts with multiple numbers,

highlight the number you choose

to be as Speed Dial, then press

the Center Select Key .)

6. Press the Center Select Key

Yes.

A confirmation message is

displayed.

5. In Case of Emergency

(ICE)

This menu allows you to store

names, phone numbers and other

information, which will be very

helpful in case of emergency. Also,

it allows you to add, read, edit, or

erase the notes yourself as

necessary in case an emergency

takes place.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Contacts.

3. Press In Case of

Emergency.

4. Use the Directional Key to

highlight Contact 1, 2, or 3, then

press the Center Select Key

[ADD].

5. Press to add Contact from

your Contact List.

Highlight the Contact, then press

the Center Select Key .

ICE CONTACT ASSIGNED is

displayed.

Press to enter information

not stored in your Contact List.

6. The generic Contact label

changes to the specified name.

Entering Your ICE Personal Info

1. With the slide open, press the

Center Select Key [MENU].

2. Press Contacts.

3. Press In Case of

Emergency.

4. Highlight

Personal Info, then

press the Center Select Key .

5. Highlight one of the Note entries,

then press the Center Select Key

6. Enter information that would be

helpful in an emergency (e.g.,

your medical record number),

then press the Center Select Key

TIP

When you've assigned ICE Contacts

and your phone is locked, the Left

Soft Key appears as [ICE]

allowing the emergency information to

be viewed without unlocking the

phone.

CONTACTS

6. My Name Card

Allows you to view all of your

personal Contact information

including name, phone numbers,

and email address in one entry.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Contacts.

3. Press My Name Card.

4. Press the Center Select Key

[EDIT] to enter your personal

Contact information.

5. Use the Directional Key to

scroll to the information you

want to enter.

6. Enter your information as

necessary, then press the Center

Select Key .

NOTE

Press the Right Soft Key

[Options]

to send your name card.

SHORTCUT

From standby mode, pressing the Left Soft Key

is a hot key to your MESSAGING.

Text messages, Picture messages,

and the Voicemail box become

available as soon as the phone is

powered on.

●Check types of messages by

pressing the Left Soft Key

[Message].

●Make a call to the callback

number (in Inbox) by pressing

during a message check.

The phone can store over 541

messages. The information stored

in the message is determined by

phone model and service capability.

Other limits to available characters

per message may exist. Please

check with your service provider

for system features and

capabilities.

New Message Alert

Your phone will alert you when you

have new messages.

1. The phone displays a message

on the screen.

2. The message icon ( ) is

displayed on the display screen.

In the case of a high priority

message, the icon will flash and

a warning message is displayed.

1. New Message

Allows you to send messages (Text,

Picture, Video, and Voice) and

pages. Each message has a

destination (Address) and

information (Message). These are

dependent upon the type of

message you want to send.

1.1 TXT Message

The Basics of Sending a Message

1. With the slide open, press the

Left Soft Key [Message].

2. Press New Message.

3. Press TXT Message.

4. Enter the phone number of the

recipient or the email address for

an email message. You can enter

up to 10 addresses for a single

message.

5. Press the Directional Key

downward.

MESSAGING

6. Type your message.

7. Press the Center Select Key

[SEND].

Customizing the Message Using

Options

●Editing the To: field

1. With the To field highlighted,

press the Right Soft Key

[Add].

2. Select the option(s) to customize.

From Contacts/ From Recent

Calls/ Groups/ To Contacts

●Editing Text

1. With the Text field highlighted,

press the Right Soft Key

[Options].

2. Select the option(s) to customize.

Save As Draft Saves the

message into the Drafts folder.

Add Allows you to add Graphic,

Animation, Sound, Quick Text,

Signature, Name Card, or

Address From Contacts .

Format Text Allows you to

change the look of the text.

Alignment/ Font Size/ Font Style/

Text Color/ Background

Priority Level Gives priority to

the message.

High/ Normal

Callback # Inserts a pre-

programmed callback number

with your message.

On/ Off/ Edit

Save Quick Text Allows you to

define phrases for Quick Text.

Cancel Message Cancels

message editing and goes to

New Message menu.

3. Complete and then send or save

the message.

Using Contacts to Send a Message

You can designate an entry saved

in your Contacts as the address

instead of manually entering the

destination.

1. With the slide open, press the

Left Soft Key [Message].

2. Press New Message.

3. Press TXT Message.

4. Press the Right Soft Key

[Add].

5. Use the Directional Key to

highlight From Contacts and

press the Center Select Key .

6. Use the Directional Key to

highlight the Contact entry

containing the destination and

press the Center Select Key .

7. Press the Left Soft Key

[Done].

NOTE

The Address feature allows multi-

sending of up to 10 total addresses.

8. Complete the message as

necessary.

1.2 Picture Message

The Basics of Sending a Message

1. With the slide open, press the

Left Soft Key [Message].

2. Press New Message.

3. Press Picture Message.

4. Enter the cellular phone number

or email address of the recipient.

5. Press the Directional Key

downward.

6. Type your message.

7. Use the Directional Key to

highlight Pictureand press the

Left Soft Key [My Pics]. Use

the Directional Key to

select the image you want to

send, then press the Center

Select Key .

8. Use the Directional Key to

highlight Sound, then press the

Left Soft Key [Sounds]. Use

the Directional Key to

highlight the audio file you want

to send then press the Center

Select Key .

9. Use the Directional Key to

highlight Name Card, then press

the Left Soft Key [Contacts].

Use the Directional Key to

select the Name Card you want

to send, then press the Center

Select Key .

10. Use the Directional Key to

highlight Subject and enter the

subject.

11. Press the Center Select Key

[SEND].

A confirmation message is

displayed.

● Editing the To: field

1. With the To field highlighted,

press the Right Soft Key

[Add].

2. Select the option(s) to customize.

From Contacts/ From Recent

Calls/ Groups/ To Online Album/

To Contacts

MESSAGING

●Editing Text

1. With the Text field highlighted,

press the Right Soft Key

[Options].

2. Select the option(s) to customize.

Preview Displays the Picture

message as it would be seen by

the recipient.

Save As Draft Saves the

message into the Drafts folder.

Copy Text Allows you to copy

text.

Add Quick Text Inserts

predefined phrases.

Add Slide Insert multiple

pictures into a picture message.

Priority Level Gives priority to

the message.

High/ Normal

Cancel Message

●Editing Picture

1. With the Picture field highlighted,

press the Right Soft Key

[Options].

2. Select the option(s) to customize.

Preview/ Save As Draft/ Add

Slide/ Priority Level/ Remove

Picture/ Cancel Message

●Editing Sound

1. With the Sound field highlighted,

press the Right Soft Key

[Options].

2. Select the option(s) to customize.

Preview/ Save As Draft/ Add

Slide/ Priority Level/ Remove

Sound/ Cancel Message

●Editing Name Card

1. With the Name Card field

highlighted, press the Right Soft

Key [Options].

2. Select the option(s) to customize.

Preview/ Save As Draft/ Add

Slide/ Priority Level/ Remove

Name Card/ Cancel Message

●Editing a Subject

1. With the Subject field

highlighted, press the Right Soft

Key [Options].

2. Select the option(s) to customize.

Preview/ Save As Draft/ Copy

Text/ Add Quick Text/ Add Slide/

Priority Level/ Cancel Message

3. Complete and press the Center

Select Key [SEND].

1.3 Video Message

The Basics of Sending a Message

1. With the slide open, press the

Left Soft Key [Message].

2. Press New Message.

3. Press Video Message.

4. Enter the cellular phone number

or email address of the recipient.

5. Press the Directional Key

downward.

6. Type your message.

7. Use the Directional Key to

highlight Video and press the

Left Soft Key [Videos].

Use the Directional Key to

highlight the video file you want

to send, then press the Center

Select Key .

8. Use the Directional Key to

highlight Name Card, then press

the Left Soft Key [Contacts].

Use the Directional Key to

select the Name Card you want

to send, then press the Center

Select Key .

9. Use the Directional Key to

highlight Subject and enter the

subject.

10. Press the Center Select Key

[SEND].

A confirmation message is

displayed.

Customizing the Message Using

Options

●Editing the To: field

1. With the To field highlighted,

press the Right Soft Key

[Add].

2. Select the option(s) to customize.

From Contacts/ From Recent

Calls/ Groups/ To Online Album/

To Contacts

●Editing Text

1. With the Text field highlighted,

press the Right Soft Key

[Options].

2. Select the option(s) to customize.

Preview Displays the Video

message as it would be seen by

the recipient.

Save As Draft Saves the

message into the Drafts folder.

Copy Text Allows you to copy

text.

Add Quick Text Inserts

predefined phrases.

MESSAGING

Priority Level Gives priority to

the message.

High/ Normal

Cancel Message

●Editing Video

1. With the Video field highlighted,

press the Right Soft Key

[Options].

2. Select the option(s) to customize.

Preview/ Save As Draft/ Priority

Level/ Remove Video/ Cancel

Message

●Editing Name Card

1. With the Name Card field

highlighted, press the Right Soft

Key [Options].

2. Select the option(s) to customize.

Preview/ Save As Draft/ Priority

Level/ Remove Name Card/

Cancel Message

● Editing the Subject

1. With the Subject field

highlighted, press the Right Soft

Key [Options].

2. Select the option(s) to customize.

Preview/ Save As Draft/ Copy

Text/ Add Quick Text/ Priority

Level/ Cancel Message

3. Complete and then send or save

the message.

1.4 Voice Message

The Basics of Sending a Message

1. With the slide open, press the

Left Soft Key [Message].

2. Press New Message.

3. Press Voice Message.

4. Press the Center Select Key

to start recording.

5. Record your voice message.

6. Press the Center Select Key

to end recording.

7. Enter the cellular phone number

or email address of the recipient.

8. Press the Directional Key

downward.

9. Type your message.

10. Use the Directional Key to

highlight Name Card, then press

the Left Soft Key

[Contacts]. Use the Directional

Key to choose My Name

Card/ From Contacts.

11. Use the Directional Key to

highlight Subject and enter the

subject.

12. Press the Center Select Key

[SEND].

After a connecting display,

message is transmitted.

2. Inbox

The phone alerts you in 3 ways

when you receive a new message:

●By displaying a message

notification on the screen.

●By sounding a sound or

vibration, if set.

●By blinking (only when you

get a high priority message).

Viewing Your Inbox

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press Inbox.

4. Options from here with a

message highlighted:

●Press the Center Select Key

[OPEN] to view the

message.

●Press the Left Soft Key

[Erase].

●Press the Right Soft Key

[Options].

Reply Replies to the origination

address of the received message.

Reply With Copy Replies to the

origination address including the

original message with your reply.

Forward Forwards a received

message to other destination

address(es).

Add To Contacts Stores the

callback number, email address,

and numbers from the address of

the received message into your

Contacts.

Extract Addresses Allows you to

extract addresses.

Sort By Sender/Time Allows you

to sort messages alphabetically

or by time received.

Manage Inbox Allows you to

manage (lock or erase) message

list.

Message Info Allows you to

check the received message

information.

Message Icon Reference

New/Unread TXT

Messages

Opened/Read TXT

Messages

MESSAGING

Priority High

Locked

New/Unread Picture/ Video

Messages

Open/Read Picture/ Video

Messages

New/Unread Browser

Messages

Opened/Read Browser

Messages

New/Unread Notification

Messages

Open/Read Notification

Messages

3. Sent

You can save up to 100 sent

messages. This menu lists your

Sent messages. Use it to verify

whether the transmission was

successful or not and view

message contents.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press Sent.

4. Options from here with a

message highlighted:

●Press the Center Select Key

[OPEN] to view the

message.

●Press the Left Soft Key

[Erase].

●Press the Right Soft Key

[Options].

Forward Forwards a sent

message to other destination

address(es).

Send/Resend Allows you to

retransmit the selected

message.

Add To Contacts Stores the

callback number, email address,

and numbers from the address of

the message into your Contacts.

Sort By Recipient/Time Allows

you to sort alphabetically or by

time sent.

Manage Sent Allows you to

manage (erase or lock) message

list.

Message Info Allows you to

check the sent message

information.

Message Icon Reference

Text/Picture/Video

Messages sent

Message delivered

Text/Picture/Video

Messages failed

Multiple Messages sent

Multiple Messages

delivered

Multiple Messages failed

Multiple Messages

incomplete

Priority High

Locked

4. Drafts

Displays draft messages.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press Drafts.

4. Options from here with a

message highlighted:

●Press the Center Select Key

[EDIT] to continue the

message.

●Press the Left Soft Key

[Erase].

●Press the Right Soft Key

[Options].

Send Sends the selected

message.

Add To Contacts Stores the

callback number, email address,

and numbers from the address

included in the message into

your Contacts.

Manage Drafts Allows you to

manage (erase or lock)

messages.

Message Icon Reference

Draft TXT

Draft Picture/Video

MESSAGING

5. Voicemail

Allows you to view the number of

new voice messages recorded in

the Voicemail box. Once you

exceed the storage limit, old

messages are overwritten. When

you have a new voice message,

your phone will alert you.

Checking Your Voicemail Box

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press Voicemail.

4. Options from here :

●Press the Left Soft Key

[Clear] to delete information, and

then press the Center Select Key

[Yes].

●Press or [CALL] to

listen to the message(s).

1. Dial *86 (*VM) from your

phone or dial your wireless

phone number from any touch-

tone phone.

2. When the recorded

announcement begins, press

to interrupt (if applicable).

3. When prompted, enter your

password, then .

6. Mobile IM

Allows you to send and receive an

Instant Message at any time.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press Mobile IM.

7. Email

Allows you to send an email via

Mobile Web.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press Email.

4. A Mobile Web Browser session

starts.

5. Highlight an email provider and

press the Center Select Key .

6. Login or enter your email

address and password.

8. Chat

Allows you to chat with Internet

Messenger users.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press Chat.

4. A Mobile Web Browser session

starts.

5. Highlight a Chat provider and

press the Center Select Key .

NOTE

This feature may require a

subscription to a Chat service

provider.

MSG Settings

Allows you to configure settings for

your messages.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press the Left Soft Key

[Settings].

Use the Directional Key to

highlight one of the settings and

press the Center Select Key

to select it.

Message Settings Sub-Menu

Descriptions

1. Entry Mode (Word/ Abc/ ABC/

123)

Allows you to select the default

input mode including Word, Abc,

ABC, 123.

2. Auto Save (On/ Off/ Prompt)

With this feature on, messages are

automatically saved in the Sent

folder when transmitted.

3. Auto Erase (On/ Off)

With this feature on, read

messages are automatically

deleted when you exceed the

storage limit.

4. TXT Auto View (On/Off)

Allows you to directly display the

content when receiving a message.

5. TXT Auto Play (On/Off)

Allows the display to automatically

scroll while viewing messages.

6. Pic-Video Auto Receive (On/Off)

Allows you to directly download the

content when receiving a Picture

message.

MESSAGING

7. Quick Text

Allows you to display, edit, and add

text phrases. These text strings

allow you to reduce manual text

input into messages.

8. Voicemail #

Allows you to manually enter the

access number for Voicemail

Service. This feature should be only

used when a VMS (Voicemail

Service) access number is not

provided from the network.

9. Callback #

Allows you to automatically send a

designated callback number when

you send a message.

0. Signature (None/ Custom)

Allows you make/edit a signature to

automatically send with your

messages.

Erasing Messages

Allows you to erase all messages

stored in your Inbox, Sent, or Drafts

folders. You can also erase all

messages at the same time.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Messaging.

3. Press the Right Soft Key

[Options] then select one of the

following:

Erase Inbox/ Erase Sent/ Erase

Drafts/ Erase All

4. Press the Center Select Key

to erase the messages selected.

A confirmation message is

displayed.

T C

The Recent Calls Menu is a list of

the last phone numbers or Contact

entries for calls you placed,

accepted, or missed. It's continually

updated as new numbers are

added to the beginning of the list

and the oldest entries are removed

from the bottom of the list.

1. Missed

Allows you to view the list of

missed calls; up to 90 entries.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Recent Calls.

3. Press Missed.

4. Use the Directional Key to

highlight an entry, then

●Press the Center Select Key

to view the entry.

●Press to place a call to

the number.

●Press the Right Soft Key

[Options] to select:

Save To Contacts (Details)/

Erase/ Lock(Unlock)/ Erase

All/ View Timers

●Press the Left Soft Key

[Message] to select:

TXT Message/ Picture

Message/ Video Message /

Voice Message

2. Received

Allows you to view the list of

incoming calls; up to 90 entries.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Recent Calls.

3. Press Received.

4. Use the Directional Key to

highlight an entry, then

●Press the Center Select Key

to view the entry.

●Press to place a call to

the number.

●Press the Right Soft Key

[Options] to select:

Save To Contacts (Details)/

Erase/ Lock(Unlock)/ Erase

All/ View Timers

●Press the Left Soft Key

[Message] to select:

TXT Message/ Picture

Message/ Video Message /

Voice Message

RECENT CALLS

3. Dialed

Allows you to view the list of

outgoing calls; up to 90 entries.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Recent Calls.

3. Press Dialed.

4. Use the Directional Key to

highlight an entry, then

●Press the Center Select Key

to view the entry.

●Press to place a call to

the number.

●Press the Right Soft Key

[Options] to select:

Save(Details)/ Erase/

Lock(Unlock)/ Erase All/

View Timers

●Press the Left Soft Key

[Message] to select:

TXT Message/ Picture

Message/ Video Message /

Voice Message

4. All

Allows you to view the list of all

calls; up to 270 entries.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Recent Calls.

3. Press All.

4. Use the Directional Key to

highlight an entry, then

●Press the Center Select Key

to view the entry.

●Press to place a call to

the number.

●Press the Right Soft Key

[Options] to select:

Save(Details)/ Erase/

Lock(Unlock)/ Erase All/

View Timers

●Press the Left Soft Key

[Message] to select:

TXT Message/ Picture

Message/ Video Message /

Voice Message

SHORTCUT

To view a quick list of all your

recent calls, press

from standby mode.

5. View Timers

Allows you to view the duration of

selected calls.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Recent Calls.

3. Press View Timers.

4. Use the Directional Key to

highlight a call list.

Last Call/ All Calls/ Received

Calls/ Dialed Calls/ Roaming

Calls/ Transmit Data/ Received

Data/ Total Data/ Last Reset/

Lifetime Calls/ Lifetime Data

Counter

5. Reset all the recorded timers by

pressing the Right Soft Key

[Reset All] if you want to reset.

Allows you to perform simple

mathematical calculations. You can

enter numbers up to the eighth

decimal place. Calculations can be

made with up to 4 lines at one time.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Calculator.

3. Enter the numbers to get the

value you want. To cancel a

number, press the Left Soft Key

[Clear].

4. Use the Right Soft Key

[Operators] to add parenthesis or

power among numbers for

calculation.

5. Use the Directional Key to

enter operation between

numbers and press the Center

Select Key [ = ] for the result.

NOTE

To insert a decimal, press . To

insert ±, press .

CALCULATOR

MEDIA CENTER

A C

MEDIA CENTER allows you to do

more than just talk on your phone.

MEDIA CENTER is a technology

and service that allows you to

download and use applications on

your phone. With MEDIA CENTER,

it’s quick and easy to personalize

your phone to your lifestyle and

tastes. Just download the

applications that appeal to you.

With a wide range of software

available, you can be assured that

you can find something useful,

practical, or entertaining.

Anything Unclear?

From the MEDIA CENTER menu,

press the Right Soft Key [Info]

to see your memory status, activity

log, help text, and MEDIA CENTER

status. Use the Help option to view

information from buying new

applications to expired applications.

1. Music & Tones

Personalize your phone with

ringtones. A wide variety of

choices are available, such as

current hits, pop, hip-hop, and

more.

Access and Options

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Select a submenu by pressing

the number that corresponds

with the submenu.

1.1 V CAST Music

Allows you to download a variety of

music via V CAST whenever and

wherever you are.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Press V CAST Music.

NOTE

Additional charges for music may

apply. V CAST Music service is not

available in all areas. Check

www.verizonwireless.com/getitnow

website for details.

1.2 Get New Ringtones

Allows you to connect to MEDIA

CENTER and download various

ringtones.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Press Get New Ringtones.

VZW Tones Deluxe

VZW Tones Deluxe has all the best

sound clips of your favorite songs

that you can use as ringtones for

your phone. Preview, download,

and manage all the latest and

greatest ringtones right from your

phone. To find all the latest hits,

check out our “What's New”

category. If you’re looking for the

hottest tones, check out ‘What’s

Hot”.

NOTE

Additional fees apply.

VZW SONG ID

Access SONG ID from the Get New

Ringtones menu, then use it to

identify songs when you're on the go,

and then download them as songs,

Ringtones, and Ringback Tones.

1.3 My Ringtones

Allows you to select a desired

ringtone, download a new ringtone.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Press My Ringtones.

5. Use the Directional Key to

highlight a ringtone and press

the Left Soft Key [Set As].

●Ringtone

●Contact ID: Highlight and

select the Contact to be

identified by the ringtone you

selected.

●Alert Sounds: Press the

corresponding number key to set

the ringtone for one of the

following:

All Messages/ TXT Message/

Pic/Video/Voice Message/

Voicemail

MEDIA CENTER

1.4 My Music

Allows you to store and to listen to

music right from your phone. Shop

for and download a variety of

music, transfer music between your

phone and computer, manage and

organize your music files, and more.

NOTE

File storage varies according to the

size of each file as well as memory

allocation of other applications.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Press My Music.

5. Use the Directional Key to

highlight a submenu.

Playing Your Music

My Music submenus make it easy

to find and play the music you’ve

stored in your phone.

Access My Music

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Press My Music.

5. Use the Directional Key to

select a submenu, then press the

Center Select Key .

Genres/ Artists/ Albums/ Songs/

Playlists/ Inbox/ Play All/ Shuffle

6. Select a song and press the

Center Select Key to start

the Music Player.

Exit From the Music Player

1. Display the Music Player.

2. Press to exit from the

Music Player.

NOTE

You can also exit the Music Player by

pressing until the display returns

to standby mode.

1.5 My Sounds

Allows you to record a new sound

or select a desired sound.

How to record a new sound

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Press My Sounds.

5. Press Record New and

press the Center Select Key

to start recording.

How to select a sound

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Music & Tones.

4. Press My Sounds.

5. Use the Directional Key to

scroll and highlight a preloaded

sound.

Options with a sound file

highlighted:

●Press the Left Soft Key

[Erase].

●Press the Center Select Key

[PLAY].

●Press the Right Soft Key

[Options] to select:

Send/ To Online Album/

Rename/ Move/ Lock(Unlock)/

Erase All/ File Info

1.6 Sync Music

Allows you to synchronize music

clips from a PC to your phone.

Verify that the transfer was

successful on the confirmation

screen.

Download music to your PC

1. Open Music Manager. Don’t

have music manager? Download

it for free at

www.verizonwireless.com/music

manager.

2. Select the Buy Music tab.

3. Log in.

4. Go to My Purchases.

5. Songs that you’ve purchased but

have not yet downloaded are

indicated by an icon in the “d/l”

column on the right-hand side of

the list of songs.

6. Check the box(es) of songs you

wish to download.

7. Select “Download.”

8. To play the song, you can find it

by selecting the Music On My PC

tab.

NOTES

●

V CAST Music will only work with Windows®

XP and Windows VistaTM operating systems,

with Windows Media®Player 10 or higher.

Mac OS is not supported.

●

Acompatible USB cable (sold separately) is

required for syncing.

Sync your music from your PC to

your V CAST Music wireless

device

MEDIA CENTER

1. Open Music Manager. Don’t

have music manager? Download

it for free at

www.verizonwireless.com/music

manager.

2. Use a USB cable (sold

separately) to connect the cable

to your phone and PC.

NOTE

Acompatible USB cable (sold

separately) is required for syncing.

3. Music Manager software will

automatically detect the phone,

and activate “sync” mode.

4. In V CAST Music Manager,

select songs you want to sync

from the Music On My PC tab

and drag them to the “Sync List”

box.

5. In V CAST Music Manager,

select either the phone’s internal

memory or removable storage

card.

6. Select Sync Now in V CAST

Music Manager.

7. When complete, on your phone,

exit Sync Music and disconnect

the cable from your phone.

8. Under the Music & Tones menu,

open My Music to view and play

your music.

V CAST Music with Rhapsody *

V CAST Music with Rhapsody is a

digital music service that lets you

listen to millions of songs from

thousands of artists for one low

monthly price. Discover new and

old favorites in an extensive music

catalog. Download V CAST Music

with Rhapsody software to your

Windows PC to sync tracks,

albums, and playlists to your new

compatible phone, while managing

your existing PC music library all in

one place.

*V CAST Music with Rhapsody

coming soon. For more

information about this service

and when it will be available visit

www.verizonwireless.com/music

2. Picture & Video

View, take, and trade your digital

pictures and videos right from your

wireless phone.

Access and Options

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Select a submenu.

2.1 V CAST Videos

V CAST brings the world to your

mobile phone with full-motion video

and sound. Catch up with what’s

happening with video clips from

news, sports, entertainment, or

weather (must be in V CAST

coverage area. Additional fees may

apply).

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press V CAST Videos.

Browsing, Selecting, and Playing

Video Clips

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press V CAST Videos to

open Video Clips Catalog.

5. Use the Directional Key to

highlight Video Clip categories

including News, Entertainment,

Sports, and Weather then press

the Center Select Key to

select.

6. Highlight content provider, then

press the Center Select Key .

7. If applicable, highlight a sub-

category, then press the Center

Select Key .

8. Highlight the video clip you want

to view, then press the Center

Select Key .

To view a Streaming Video

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press V CAST Videos.

5. Select a Video Clip Category and

a Video Clip, and press the

MEDIA CENTER

Center Select Key .

6. Read the description of the video

clip, and press the Center Select

Key to view.

7. Select

Yes to accept charges,

press the Center Select Key

and the Video Clip will initiate

transfer.

8. The video clip will begin

playback shortly after being

selected.

To download a Video Clip

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press V CAST Videos.

5. Highlight a video clip, then press

the Center Select Key .

6. Read the description of the video

clip and press the Right Soft Key

[Options].

7. Press Save Video.

8. Select Yes to accept charges,

press the Center Select Key

and the video clip will initiate

downloading of video.

9. Once video is downloaded a

message will appear on your

phone.

10. Select Yes and press the Center

Select Key to view video.

11. The video clip will be

automatically saved in My Clips

and in My Videos.

NOTE

Not all videos are downloadable.

Only videos that have the option to

save can be downloaded. Additional

charges for each video clip viewed

may apply. Video Clips service is not

available in all areas. Check

www.verizonwireless.com/getitnow

website for details.

Deleting Video Clips

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press V CAST Videos.

5. Press the Left Soft Key [My

Videos].

6. Highlight the Video to delete

using the Directional Key .

7. Press the Right Soft Key

[Options] and press Erase.

8. Press the Center Select Key

[Yes] to erase Video.

Configure Alerts for New Video

Clips

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press V CAST Videos.

5. From Video Clips Catalog, select

a category.

6. Select Content Provider.

7. Press the Right Soft Key

[Options].

8. Select Alerts.

9. Select Configure Alerts.

10. Select content for alerts desired

and press the Center Select Key

to save.

2.2 Get New Pictures

Allows you to connect to MEDIA

CENTER and download a variety of

images for My Pictures.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press Get New Pictures.

5. Press the Center Select Key .

2.3 My Pictures

Allows you to view photos stored in

the phone.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press My Pictures.

5. Highlight a picture with the

Directional Key and press

the Right Soft Key [Options].

6. Select one of the following

options:

Send Picture Message/ To

Online Album/ Via Bluetooth

Set As Wallpaper/ Picture ID

Take Picture Turns on the

camera function.

Get New Pictures Downloads

various pictures.

Manage My Pics Allows you to

mark multiple pictures to be

erased, moved or locked/

unlocked.

Rename Allows you to change

the file name.

Print Print via Bluetooth/ Print

Preferences

MEDIA CENTER

File Info Name/ Date/

Time/Resolution/ Size

NOTE

The option 'Send via Bluetooth' is not

displayed when you select pictures

protected by DRM (Digital Rights

Management).

Additional Options

Use the Directional Key to

highlight a picture, then press

[VIEW] to access additional

options:

Full View Displays the photo using

the entire screen.

Edit Allows you to zoom, rotate and

crop the photo.

2.4 My Videos

Allows you to view videos stored in

the phone.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press My Videos.

5. Highlight a video with the

Directional Key and press

the Right Soft Key [Options].

Send Sends a video message.

Record Video Turns on the video

camera function.

To Online Album Accesses the

Online Album.

V CAST Videos Accesses

V CAST Videos feature.

Manage My Videos Allows you

to mark multiple videos to be

erased, moved or locked/

unlocked.

Set As Wallpaper Displays the

selected video file as the

background for your phone.

Rename Renames the selected

video.

File Info Name/ Date/ Time/

Duration/ Size

6. Press the Center Select Key

to play.

NOTE

File storage varies according to the

size of each file as well as memory

allocation of other applications.

●: Adjust the volume.

●Left Soft Key : Mute/ Unmute

●: Pause/ Play

●Up Navigation Key : Shows

the widescreen.

●Down Navigation Key : Stop

●Right Navigation Key : FF

●Left Navigation Key :

Rewind

7. Press the Right Soft Key

[Options] to select one of the

following options:

Set As Wallpaper/ File Info

2.5 Take Picture

Lets you to take

digital pictures.

1. With the slide

open, press the

Center Select

Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press Take Picture.

5. Set the brightness by moving the

Directional Key Up and Down

, zoom by moving the

Directional Key left and right ,

and press the Right Soft Key

[Options] to change other

settings.

●Select the option(s) to customize.

RESOLUTION 1600x1200/

1280X960/ 640X480/ 320X240

SELF TIMER Off/ 3 Seconds/

5 Seconds/ 10 Seconds

WHITE BALANCE Auto/ Sunny/

Cloudy/ Fluorescent/ Glow

SHUTTER SOUND Shutter/ No

Sound /Say “Cheese”/

Ready! 1 2 3

COLOR EFFECTS Normal/

Negative/ Aqua/ Sepia/

Black&White

NIGHT MODE On/ Off

SAVE OPTION Internal/ External

PHOTOMETRY Average/ Spot

PREVIEW Actual view/ Full

screen

CAPTURE Camera/ Video

6. Take a picture by press the

center select key [TAKE].

7. Press the Left Soft Key

[Save]. The picture is stored in

My Pictures.

2.6 Record Video

Lets you record a

video with sound.

1. With the slide

open, press the

Center Select

Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press Record Video.

5. Set the brightness by moving the

Directional Key Up and Down

MEDIA CENTER

, zoom by moving the

Directional Key left and right ,

and press the Right Soft Key

[Options] to change other

settings.

RECORDING TIME For Send/ For

Save

RESOLUTION 320X240/ 176X144

SAVE OPTION Internal/ External

COLOR EFFECTS Normal/

Negative/ Aqua/ Sepia/

Black&White

WHITE BALANCE Auto/ Sunny/

Cloudy/ Fluorescent/ Glow

CAPTURE Camera/ Video

6. Press the Center Select Key

[REC] to begin recording, and

again to stop.

7. Press the Left Soft Key

[Save]. The recorded video is

stored in My Videos.

2.7 Online Album

Use to access the Online Album

(PIX Place).

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Picture & Video.

4. Press Online Album.

3. Games

Allows you to download games and

applications from the MEDIA

CENTER server. Choose the

software you want from the list

displayed on the screen.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Games.

4. Press the Center Select Key

Get New Applications.

4. Mobile Web

The Mobile Web feature allows

you to access news, sports,

weather, and email from your

Verizon Wireless device. Access

and selections within this feature

are dependent upon your service

provider. For specific information on

Mobile Web access through your

phone, contact your service

provider.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Mobile Web.

Ending a Browser Session

End a Browser session by pressing

Navigating Through the Browser

On-screen items appear in one of

the following ways:

●Numbered options

You can use your numeric keypad

or you can select the items by

moving the cursor and pressing

the appropriate Soft Keys.

●Links embedded in content

You can act on the options or the

links using the Soft Keys just

below the display screen.

●Text or numbers

You can select the items by

moving the cursor and pressing

the appropriate Soft Keys.

Scrolling

Use the Directional Key .

A cursor lets you know which item

is currently selected.

Fast Scrolling

Press and hold the Directional Key

to quickly move the cursor up

and down on the current screen.

Scrolling by Page

Press the Side Keys to move up and

down a page at a time.

Home Page

To go to the Home Page, press

View Browser Menu

Press Voice Commands key to

use the Browser menu.

Soft Keys

To navigate to different screens or

select special functions, use the

Soft Keys. The function associated

with the Soft Keys can change for

each page and depends on each

highlighted item.

Left Soft Key

Left Soft Key is used primarily

for options or selecting an item but

its function may change, depending

on the content displayed.

Right Soft Key

Right Soft Key is used primarily

for secondary options or a menu of

secondary options.

Entering Text, Numbers, or Symbols

When prompted to enter text, the

current text entry method appears

above the Right Soft Key as

Word, Abc, ABC, 123 or Symbols.

MEDIA CENTER

To change the input mode, press

the Right Soft Key . To create an

upper case character, press .

Deleting Text/Number Entered

When entering text or numbers,

press to clear the last

number, letter, or symbol. Press and

hold to clear the input field

completely.

Initiating a Phone Call From the

Browser

You can make a phone call from the

Browser if the site you are using

supports the feature (the phone

number may be highlighted and the

Left Soft Key appears as Call).

The browser connection is

terminated when you initiate the

call. After you end the call, your

phone returns to the screen from

which you initiated the call.

5. Browse & Download

Everything you need to know while

you’re on the go.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Browse &

Download.

4. Press the Center Select Key

Get New Applications.

VZ NavigatorSM

Now you can find the address of a

great restaurant or the nearest

ATM. Check movie times. Discover

the latest hot spots. And know

exactly how to get where you’re

going. VZ Navigator puts all the

advanced features of the latest GPS

devices and systems on your

wireless device — at a fraction of

the price.

NOTES ●

To use VZ Navigator, you must

turn location on. (See page 81)

●

Download, subscription and

airtime required for use; only in

National Enhanced Service

Coverage Area: accuracy and

completeness of information is

not guaranteed; information

about location of device will be

used to deliver service.

6. Extras

1. With the slide open, press the

Center Select Key [MENU].

2. Press Media Center.

3. Press Extras.

4. Press the Center Select Key

Get New Applications.

The Email Menu allows you to set

up your email account and

conveniently exchange emails

wirelessly with your device. To use

this feature, download appropriate

applications first; read the

instructions on your device and

follow them.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Email.

E I

The Mobile IM Menu allows you to

talk to your friends without actually

talking. AIM, WL Messenger,

Yahoo! Instant Messenger are just

a few of the available Mobile IM

applications you can use with your

1. With the slide open, press the

Center Select Key [MENU].

2. Press Mobile IM.

EMAIL / MOBILE IM

VZ NAVIGATOR

Z N

The VZ Navigator Menu allows you

to get directions to locations when

you're out and about.

●Voice-prompted turn-by-turn

directions with auto-rerouting if

you miss a turn

●View detailed color maps that

can be panned and zoomed

●Find points of interest

1. With the slide open, press the

Center Select Key [MENU].

2. Press VZ Navigator.

S &

& T

1. My Verizon

Check your subscription

information ranging from your

payment plan to your software

upgrade or other available service.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press My Verizon.

2. Tools

Your phone tools include Voice

Commands, Calculator, Ez Tip

Calculator, Calendar, Alarm Clock,

Stopwatch, World Clock, Notepad,

and USB Mass Storage.

2.1 Voice Commands

This feature provides you with the

following options equipped with

AVR (Advanced Voice Recognition)

technology. Each option has its

detailed information on the phone

and you can check it out by

pressing the Left Soft Key

[Info].

Access and Options

1. With the slide open, press the

Voice Command Key .

The Voice Commands Feature has

several settings which allow you to

customize how you want to use it.

Access Voice Commands, then

press the Right Soft Key

[Settings].

Digit Dial Readout On/ Off

Choice List Automatic/ Always Off

Sensitivity Control the sensitivity as

Reject More/ Automatic/ Reject

Less.

Train Voice If the phone often asks

you to repeat voice command, train

the phone to recognize your voice

patterns.

Prompts Mode/ Audio Playback/

Timeout

For Mode, set Prompts/ Readout +

Alerts/ Readout/ Tones Only. For

Audio Playback, set Speakerphone

or Earpiece.

For Timeout, set 5 seconds or

10 seconds.

Call Alert Ring Only/ Caller ID +

Ring/ Name Repeat

SETTINGS & TOOLS

2.1.1 Call <Name or Number>

Say "Call" and then call someone

simply by saying the phone number

or name. Please speak clearly and

exactly as in your Contact list.

When you have more than one

contact number, you can state the

name and number type of the

contact (for example, 'Call John

Work').

2.1.2 Send Msg to <Name or

Number>

Say 'Send Message' and the

command will prompt you for the

type of message. After choosing the

message type, you will be prompted

for the contact name, number or

group. It will automatically start a

message. If you say a full-sentence

command, such as 'Send Message

to Bob', it would automatically start

a text message without asking for

the message type. When using

'Send Message' command, speak

clearly and say the number, group

name, or name exactly as it is

entered in your Contact list.

2.1.3 Go to <Menu>

The 'Go to' command allows you to

access a menu within the phone

(for example, 'Go to Calendar').

If no menu option is stated, a list of

options will be provided.

2.1.4 Check <Item>

The "Check" command allows you

to check out a wide range of items

such as Phone Status, Voicemail,

Messages, Missed Calls, Time,

Signal Strength, Battery and

Volume.

2.1.5 Contacts <Name>

You can look up names in your

Contacts (for example, 'Contacts

John') as well as manage your

Contact List including creating,

erasing or modifying.

Read out/ Create New/ Erase/

Modify

2.1.6 My Verizon

The "My Verizon" command

provides you with direct access to

your Verizon Wireless account

information.

2.1.7 Help

Provides a general guideline to

using Voice Commands.

2.2 Calculator

Allows you to perform simple

mathematical calculations. You can

enter numbers up to the eighth

decimal place. Calculations can be

made with up to 4 lines at one time.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Tools.

4. Press Calculator.

5. Enter the numbers to get the

value you want. To cancel a

number, press the Left Soft Key

[Clear].

6. Use the Right Soft Key

[Operators] to add parenthesis or

power among numbers for

calculation.

7. Use the Directional Key to

enter operation between

numbers and press the Center

Select Key [ = ] for the result.

NOTE

To insert a decimal, press . To

insert ±, press .

2.3 Ez Tip Calculator

Allows you to quickly and easily

calculate bill amounts using the bill

total, tip % and number of people as

variables.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Tools.

4. Press Ez Tip Calculator.

5. Enter the variable fields (Total

bill, Tip (%), Split) and the

corresponding calculation fields

(tip and total for each person)

appear automatically.

6. Press the Left Soft Key

[Reset] for another calculation.

2.4 Calendar

Allows you to keep your agenda

convenient and easy to access.

Simply store your appointments and

your phone will alert you with a

reminder you set.

SHORTCUT

Pressing the Directional Key

downward from standby

mode is a hot key to Calendar

by default.

1. With the slide open, press the

Center Select Key [MENU].

SETTINGS & TOOLS

2. Press Settings & Tools.

3. Press Tools.

4. Press Calendar.

5. Use the Directional Key to

highlight the scheduled day.

Left : Previous Day

Right : Next Day

Up : Previous Week

Down : Next Week

6. Press the Left Soft Key [Add].

7. Enter Subject, then scroll down

to set remaining settings.

8. Highlight a Calendar setting field,

then press the Left Soft Key

[Set]. For each Calendar event

you can set:

●Start Time ●End Time

●Repeat ●Until

●Alerts ●Tones

●Vibrate

9. Use the Directional Key to

highlight a setting.

10. Press the Center Select Key

[SAVE] when Calendar

information is complete.

2.5 Alarm Clock

Allows you to set up to three

alarms. At the alarm time, Alarm 1

(or 2 or 3) will be displayed on the

LCD screen and the alarm will

sound.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Tools.

4. Press Alarm Clock.

5. Use the Directional Key to

highlight an Alarm (1, 2, or 3),

then press the Center Select Key

6. Enter the alarm information

including:

●Turn On/Off ●Set Time

●Repeat ●Ringtone

7. Use the Directional Key to

highlight the information you

want to set, then press the Left

Soft Key [Set] to view your

setting choices.

8. Press the Center Select Key

[SAVE] after setting all of the

Alarm fields as necessary.

When the alarm goes off, first

press the Right Soft Key

[Unlock] to unlock the screen.

Choose Snooze or Dismiss, then

press the Directional Key .

2.6 Stopwatch

Allows you to use your phone as

typical stopwatch. Start measuring

time and finish it press the center

select key . Press the Left Soft

Key to lap. Press the Right Soft

Key [Reset].

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Tools.

4. Press Stopwatch.

2.7 World Clock

Allows you to determine the current

time in another time zone or country

by navigating with the Directional

Key to the right or left.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Tools.

4. Press World Clock.

5. Press the Right Soft Key

[Cities] to check out a list of

available cities.

6. Select a city from the list, then

press the Center Select Key .

The display shows the position of

the city on a global map.

7. Press the Center Select Key

again to zoom in on the city and

view its date and time

infomation.

NOTE

With the Left Soft Key

[Set DST]

set to daylight saving time.

2.8 Notepad

Allows you to add, read, edit, and

erase notes to yourself.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Tools.

4. Press Notepad.

5. Press the Left Soft Key

[Add] to write a new note.

6. Press the Left Soft Key to

change the entry mode.

7. After filling in the note, press the

Center Select Key to save it.

SETTINGS & TOOLS

2.9 USB Mass Storage

This menu allows you to transfer

content from your phone to your

Windows®XP or Windows Vista™

PC (or vice versa) when your phone

is connected to your Windows®XP

or Windows Vista™PC with a

compatible USB cable. Mac OS

operating system is not supported.

You can only access this menu

when a microSD card is inserted in

your phone.

NOTE

Do not insert or remove the microSD

while playing, deleting or downloading

Pictures/Videos/Music/Sounds.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Tools.

4. Press USB Mass Storage.

3. Bluetooth®Menu

The is compatible with

devices that support the Bluetooth®

headset, hands-free, dial-up

networking, object push for

Contacts including name cards and

Calendar events, Advanced Audio

Distribution (Stereo), File Transfer

Profile(s), PhoneBook Access

Profile, Basic Printing Profile and

Basic Imaging Profile.*

You may create and store 20

pairings within the and

connect to one device with/without

headset.

The approximate communication

range for Bluetooth®wireless

technology is up to 30 feet (10

meters).

Bluetooth QD ID B013586

NOTE

Read the user guide of each

Bluetooth®accessory that you are

trying to pair with your phone because

the instructions may be different.

NOTE

Your phone is based on the Bluetooth®

specification, but it is not guaranteed

to work with all devices enabled with

Bluetooth®wireless technology.

Phone does not support ALL

Bluetooth®OBEX Profiles.

* For vehicle/accessory compatibility go to

www.verizonwireless.com/bluetoothchart.

TIPS ●

HEADSET:Supports use of a

compatible bluetooth headset for

mono voice.

●

HANDSFREE: Supports Bluetooth

headsets, and may also support other

installed compatible Bluetooth devices

with speakerphone capabilities, such

as car kits or a conference room

device. For Handsfree Car Kit

Compatibility, refer to

www.verizonwireless.com/bluetoothchart

on the Verizon Wireless website.

●

DIAL UP NETWORKING: Allows the

phone to be used as a data modem

with a compatible Bluetooth device,

such as a laptop or PDA, over the

VZW NationalAccess and / or VZW

BroadbandAccess systems.

●

STEREO: Supports delivery of stereo

audio to a compatible Bluetooth

device.

●

PHONEBOOK ACCESS: Allows

sharing of your name card,

phonebook entries, and call history

with a compatible Bluetooth device.

●

BASIC PRINTING: Allows printing of

JPEG files to a Bluetooth enabled

printer.

●

OBJECT PUSH: Allows sending and

receiving of contact name cards,

calendar events, and JPEG pictures

between devices.

●

FILE TRANSFER: Allows a

compatible Bluetooth device to view a

list of files and transfer non-protected

files in either direction.

●

BASIC IMAGING: Allows sending of

non-protected images for storing and

printing.

1. With the slide open, press the Center

Select Key [MENU] -> press

MEDIA CENTER -> press

Picture & Video -> press

My Pictures.

2. Use the Directional Key to

highlight the picture you want to print.

3. Press the Right Soft Key

[Options].

4. Use the Directional Key to

highlight Print, then press the Center

Select Key . To Print via

Bluetooth, press the Center Select

Key .

3.1 Add New Device

Pairing is the process that allows

the handset to locate, establish,

and register 1-to-1 connection with

the target device.

For pairing with a new Bluetooth®

device

NOTE

For instructions on how to pair your

integrated Bluetooth®

Headset, see page 72.

1. Follow the Bluetooth®accessory

instructions to set the device to

pairing mode.

2. With the slide open, press the

Center Select Key [MENU].

3. Press Settings & Tools.

4. Press Bluetooth Menu.

5. Press Add New Device.

Set the desired device to pairing.

6. If Bluetooth®power is set to off,

you will be prompted to turn

power on. Highlight Yes and

press the Center Select Key .

7. The device will appear in Add

New Device menu once it has

been located. Highlight the

device and press the Center

Select Key .

8. The handset will prompt you for

the passcode. Consult the

Bluetooth®accessory

instructions for the appropriate

passcode (typically “0000” - 4

zeroes). Enter the passcode and

When an audio device is

searched by your

device

When a PC is searched by

your device

When a PDA is searched by

your device

When another phone device

is searched by your

device

When a printer is found by

your device

When other undefined

devices are found by your

device

When a headset is

searched by your

device

When a carkit device is

searched by your

device

SETTINGS & TOOLS

press the Center Select Key .

9. Once pairing is successful,

Highlight either Always Ask or

Always Connect and press the

Center Select Key to

connect with the device.

10. Once connected, you will see

the device listed in the

Bluetooth®Menu and

Bluetooth®indicator will change

to the (single connected

icon) or (multi connected

icon) will show up on your

enunciator when connected to

the Bluetooth®device. You can

also check out the connection

with a blue icon on the list.

Icon Reference in Adding New

Device

When the Bluetooth®wireless

connection is built and paired

devices are found, the following

icons are displayed.

●Icon References When a

Bluetooth®Wireless Connection

is Searched (neither connected

nor paired).

● Icon References When

Successfully Connected

My Device Name

Allows you to edit the name of the

Bluetooth®device when Add New

Device menu is highlighted.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press the Right Soft Key

[Options].

5. Press My Device Info.

6. Press to clear the existing

name.

7. Use the numeric keypad to enter

a new custom name.

8. Press the Center Select Key

to save and exit.

TIP

Bluetooth®wireless connection is

dependent on your Blueooth stereo

device. Even though you want to

connect with a headset that supports

both stereo and handsfree profiles,

you may only be able to connect with

one.

Turn On

Allows you to set the phone's

Bluetooth®power On/Off.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press the Left Soft Key

[Turn On].

NOTE

By default, your device’s Bluetooth®

functionality is turned off.

When an only mono

headset is connected with

your device

When an only stereo

headset is connected with

your device

When stereo headsets and

mono headsets are all

connected with your

device

When an only mono

headset is connected with

your device

When an only stereo

headset is connected with

your device

When stereo headsets and

mono headsets are all

connected with your

device

SETTINGS & TOOLS

Discovery Mode

Allows you to set whether your

device is able to be searched by

other Bluetooth devices in the area.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press the Right Soft Key

[Options].

5. Press Discovery Mode.

6. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

On / Off

NOTE

If you choose On for Discovery Mode,

your device is able to be searched by

other in-range Bluetooth®devices.

Supported Profiles

Allows you to see profiles that your

phone can support.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press the Right Soft Key

[Options].

5. Press Supported Profiles.

Dial-up Networking

In order to start a dial-up

networking session:

1. Start the Bluetooth service

application or program present

on the Client device.

2. Find your phone’s name from the

list of available devices.

3. From the list of available services

or menu, select dial-up

networking.

4. Enter required information such

as ID, password and phone

number in the "Connect To"

dialog box.

5. Press the "Dial" button to initiate

the call.

Once the connection is

established, you can start using

the Internet.

File Transfer

In order to start a file transfer

session:

1. Start the Bluetooth service

application or program present

on the Client device.

2. Find your phone’s name from the

list of available devices.

3. From the list of available services

or menu, select file-transfer

service.

4. A separate window appears with

the directory structure of your

phone. You are now able to

transfer files to and from the

Client device.

Phonebook Access

Please refer to your handsfree

device or car audio system manual

for further instructions.

Last Search

Allows you to view information for

devices you have tried to search for

at least once.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press the Right Soft Key

[Options].

5. Press Last Search.

Auto Pair Handsfree

Allows the Bluetooth pairing with

an audio device to be tried

automatically with a default PIN

code- 0000.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press the Right Soft Key

[Options].

5. Press Auto Pair Handsfree.

For headset devices:

1. Remove Device: You can remove

the device from the pairing list.

2. Rename Device: You can rename

the name of the paired device.

3. Service Discovery: Allows you to

search for the services that the

selected device supports.

4. Device Info: Shows the device

information.

NOTES

In the pairing list, you can disconnect the

connected device with the blue arrow signal

by press the Left Soft Key

[Turn Off]

Reversely, you can turn it on by press the

Left Soft Key

[Turn On]

again.

When an audio device is connected, then

you select another device and press the

Center Select Key , both devices are

connected.

In case your search fails to find any pairing

device, select found device instead.

Print Picture allows you to print to devices

that support BPP profiles.

SETTINGS & TOOLS

3.2 Decoy Headset Wizard

Allows your detachable

Bluetooth Headset to be paired with

your phone.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press Decoy Headset Wizard

and follow the on-screen

instructions.

5. Detach the headset from the

phone.

NOTE

In order for headset to pair, it cannot

be attached to the phone.

6. Press the Center Select Key

[NEXT].

7. Hold down the PWR/Call button

on the headset to

power it on allowing the phone

to locate it.

8. Press the Center Select Key

[NEXT].

9. Wait while the phone and

headset synchronize.

10. Once synchronization is

complete you will see a

confirmation message. Press

the Center Select Key

[DONE] and you can begin using

your headset.

NOTE

If you want to turn the headset off,

press the Left Soft Key

[Turn

Off]

or press the Center Select Key

[Drop]

Headset Options

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Use the Directional Key to

scroll to your Decoy Bluetooth

headset device.

5. Press the Right Soft Key

[Options].

6. Select from the listed options.

1. How to...

●Recharge Your Headset

You can recharge the headset

by attaching it to the phone or

to the Bluetooth Headset

Charging Adapter and

connecting it to the charger.

●Tell If Your Headset Is Charging

The red light will display on the

headset button to indicate that

your headset battery is charging.

Once the charging is completed,

the red light will turn off.

●Power On Headset

Press and hold the button on the

headset for 3 seconds. The light

on the button will blink

periodically.

●Power Off Headset

Press and hold the button on the

headset for 2 seconds. The light

will no longer blink.

●Answer and End Calls

Lightly press on the headset

button to answer a call and press

it again to end it. Press and hold

the headset button to take a call

in call-waiting.

Bluetooth Headset Function Key Definition

Multifunction

button 1 Button

Volume

buttons 2 buttons

Function Mode Operation

Adjust the volume level for both

conversation & mask playing

Talk Short Press Once.

Call transfer (from headset to handset)

Talk (Sound in headset) Press & Hold “Vol+” 5 sec.

Function Mode Operation

Last No. Redial Standby Press & Release 1 sec.

Voice Dial Standby Press Once.

Receiving Call Standby Press Once.

Swap call Talk Press & Release 1 sec.

Call Reject Ringing Press & Release 1 sec.

Call transfer (from handset to headset)

Talk (Sound in handset) Press Once.

End Call Talk Press Once.

Manual Pairing Off Press & Hold 5 sec.

Re-link with last connected devices

(HFP/HSP) Standby (HSP/HFP link does not exist)

Press Once.

Power On Off Press & Hold 3 sec .

Power Off Standby Press & Hold 5 sec

SETTINGS & TOOLS

2. Un-Pair with Headset

Select Yes to unpair headset.

3. Rename Headset

Enter new name and press the

Center Select Key to save.

4. Device Info

You can check paired device

information.

5. Headset Light

You can check paired status with

headset light.

4. Sounds Settings

Provides options to customize the

phone’s sounds.

4.1 Master Volume

Allows you to set volume settings.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Master Volume.

5. Adjust the volume with the

Directional Key then press

the Center Select Key to

save the setting.

4.2 Call Sounds

Allows you to set how the phone

alerts you for types of incoming

calls.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Call Sounds.

4.2.1 Call Ringtone

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Call Sounds.

5. Press Call Ringtone.

6. Use the Directional Key

to highlight a ringtone then

press the Center Select Key

to save the sound.

4.2.2 Call Vibrate

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Call Sounds.

5. Press Call Vibrate.

6. Use the Directional Key

to highlight a setting, then

press the Center Select Key

On/ Off

4.3 Alert Sounds

Allows you to select the alert type

for a new message.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Alert Sounds.

5. Select TXT Message/

Pic/Video/Voice Message/

Voicemail/Emergency Tone

6. The Alert Sounds menu has

these options:

Tone/ Vibrate/ Reminder

The exception for this is the

Emergency Tone menu. This

menu has these options:

Alert/ Vibrate/ Off

4.4 Keypad Volume

Allows you to set the keypad

volume.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Keypad Volume.

5. Adjust the volume with the

Directional Key then press

the Center Select Key to

save the setting.

4.5 Service Alerts

Allows you to set any of the four

Alert options to either On or Off.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Service Alerts.

5. Select an alert option.

ERI Alerts you to the status of

cellular service.

ERI: Enhanced Roaming

Indicator

Minute Beep Alerts you 10

seconds before the end of every

minute during a call.

Call Connect Alerts you when

the call is connected.

Charge Complete Alerts you

when the battery is completely

charged.

6. Use the Directional Key to

highlight a setting, then press the

SETTINGS & TOOLS

Center Select Key .

On/ Off

4.6 Power On/Off

Allows you to set the phone to

sound a tone when the phone is

powered on/off.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Power On/Off.

5. Select Power On/ Power Off.

6. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

On/ Off

4.7 Voice Clarity

Allows you to set the voice clarity.

Using the Internal Keypad

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Sounds Settings.

4. Press Voice Clarity.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

On/ Off

5. Display Settings

Provides options to customize the

phone’s display screen.

5.1 Banner

Allows you to enter a string of up to

23 characters which displays on the

LCD screen.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Banner.

5.1.1 Personal Banner

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Banner.

5. Press Personal Banner.

6. Create your own banner text

then press the Center Select

Key [SAVE].

7. Use the Directional Key to

scroll to one of the following

banner colors, then press .

Black/ White/ Red/ Blue/

Green/ Pink/ Light Blue/

Purple/ Gray

5.1.2 ERI Banner

If you use ERI Service, ERI Text is

shown on the sub banner.

1. With the slide open, press the

Center Select Key

[MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Banner.

5. Press ERI Banner.

6. Use the Directional Key

to highlight a setting, then

press the Center Select Key

On/ Off

5.2 Backlight

Allows you to set the duration for

illuminating the backlight. Display

and Keypad are set separately.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Backlight.

5. Highlight a Backlight submenu

and press the Center Select Key

Display/ Keypad

1. Display: 7 Seconds/ 15

Seconds/ 30 Seconds/

Always Off

2. Keypad: 7 Seconds/ 15

Seconds/ 30 Seconds/

Always On/ Always Off

5.3 Wallpaper

Allows you to choose the kind of

background to be displayed on the

phone's LCD in standby mode.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Wallpaper.

5. Choose a submenu and press

the Center Select Key .

My Pictures/ My Videos/ Fun

Animations

6. Select from available screens

then press the Center Select Key

SETTINGS & TOOLS

5.4 Display Themes

Allows you to choose the color of

the background screen.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Display Themes.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Classic/ Slick Black/ Decoy

Blue/ Decoy Black

NOTE

Press the Left Soft Key

[Preview] to preview the selected

display theme.

5.5 Main Menu Settings

Allows you to choose how the Main

Menu displays for menu selection.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Main Menu

Settings.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Tab/ List/ Grid

5.6 Font Size

Allows you to set the dial font size.

This setting is helpful for those who

need the text to display a little bit

larger.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Font Size.

5. Use the Directional Key to

select Dial Digits/ Menu & Lists/

Message.

6. Press the Left Soft Key [Set].

7. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Dial Digits: Normal/ Large

Menu & Lists: Normal/ Large

Message: Normal/ Large

5.7 Clock Format

Allows you to choose the kind of

clock to be displayed on the LCD

screen.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Display Settings.

4. Press Clock Format.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Normal/ Analog/ Digital 12/

Large Digital 12/ Digital 24/

Large Digital 24/ Dual (Set City

in World Clock)/ Off

NOTE

Press the Left Soft Key

[Preview] to preview the selected

clock format.

6. Phone Settings

The Phone Settings Menu allows

you to designate specific settings to

customize how you use your phone.

6.1 Standalone Mode

(Airplane Mode)

Allows you to use the menu

functions except making calls,

Bluetooth®feature, and web

accessing, when radio transmission

is restricted. Activating Standalone

Mode will disable all wireless

communications. When in

Standalone Mode, services

supporting Location On functionality

(such as Chaperone) will be

suspended.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Standalone Mode.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

On/ Off

6.2 Set Shortcuts

Allows you to set shortcuts to

phone menus using the down, up,

left and right Directional Key.

6.2.1 Set My Shortcuts

Access these shortcuts by pressing

the Directional Key to the right from

standby mode (by default) to display

your four shortcuts.

1. With the slide open, press the

Center Select Key [MENU].

SETTINGS & TOOLS

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Set Shortcut Keys.

5. Press Set My Shortcuts.

6. Use the Directional Key to

highlight a shortcut key you want

to set.

Shortcut 1/ Shortcut 2/ Shortcut

3/ Shortcut 4

6.2.2 Set Directional Keys

Access these shortcuts from

standby mode by pressing the

Directional Key in the direction you

designate.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Set Shortcuts.

5. Press Set Directional Keys.

6. Use the Directional Key to

highlight a shortcut key you want

to set.

Up Directional Key/ Left

Directional Key/ Down

Directional Key

6.3 Voice Commands

Using the Internal Keypad

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Voice Commands.

Prompts Mode/ Audio

Playback/ Timeout

For Mode, set Prompts/ Readout

+Alerts/ Readout/ Tones Only.

For Audio Playback, set

Speakerphone/ Earpiece. For

Timeout, set 5 seconds or 10

seconds.

Call Alert Ring Only/ Caller ID +

Ring/ Name Repeat

6.4 Language

Allows you to set the bilingual

(English or Spanish) feature

according to your preference.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Language.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

English/ Español

6.5 Location

Allows you to set GPS (Global

Positioning System: Satellite

assisted location information

system) mode.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Location.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Location On/ E911 Only

NOTES ●

GPS satellite signals are not

always received by the phone,

especially under bad atmospheric

and environmental conditions,

indoors, etc.

●

When a Location Setting

Restriction is activated in the

Security Menu, the lock code is

required when you enter location

menu. The lock code is the same 4

digits you use as your device lock

code; initially the last 4 digits of

your phone number.

●

When in Standalone Mode,

services supporting Location On

functionality (such as Chaperone)

will be suspended.

6.6 Security

The Security menu allows you to

secure the phone electronically.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

The lock code is the last 4 digits

of your mobile phone number if it

is set.

The lock code is the last 4 digits

of your MEID if your mobile

phone number is not set.

6.6.1 Edit Codes

Allows you to enter a new four-

digit lock code.

1. With the slide open, press the

Center Select Key

[MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

6. Press Edit Codes.

7. Select Phone Only or Calls &

Services.

SETTINGS & TOOLS

8. Enter your new four-digit lock

code.

9. For confirmation, it will ask

you to enter the new lock

code again.

6.6.2 Restrictions

Allows you to set separate

restrictions for Location Setting,

Calls, Messages, and Dial Up

Modem.

1. With the slide open, press the

Center Select Key

[MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

6. Press Restrictions.

7. Enter the four-digit PIN code.

8. Select a Restrictions menu

then press the Center Select

Key .

Location Setting/ Calls

(Incoming Calls/ Outgoing

Calls)/ Messages (Incoming

Messages/ Outgoing

Messages)/ Dial-up Modem

9. Use the Directional Key

to highlight restriction then

press the Center Select Key

Location Setting Lock Setting/

Unlock Setting

Calls Incoming Calls/

Outgoing Calls

Messages Incoming

Messages/ Outgoing

Messages

Dial-up Modem Allow All/

Block All

6.6.3 Phone Lock

Keeps your phone from

unauthorized use. Once the

phone is locked, it's in restricted

mode until the lock code is

entered. You can receive phone

calls and still make emergency

calls. You can modify the lock

code using Edit Codes submenu

within the Security menu.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

6. Press

Phone Lock.

7. Highlight an option then press

the Center Select Key .

Unlocked The phone is never

locked (Lock mode can be

used).

On Power Up The phone is

locked when it is turned on.

6.6.4 Lock Phone Now

1. With the slide open, press the

Center Select Key

[MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

6. Press Lock Phone Now.

6.6.5 Reset Default

Allows you to reset your phone

to the factory default settings.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

6. Press Reset Default.

7. Press the Center Select Key

after reading the warning

message.

8. Select Revert by pressing the

center select key .

A confirmation message is

displayed briefly before the

phone resets itself.

6.6.6 Restore Phone

Allows you to erase all user data

and Contact information you've

entered in the phone's memory

so it's as if it just left the factory.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

6. Press Restore Phone.

7. Press the Center Select Key

after reading the warning

message.

8. Enter the four-digit lock code.

SETTINGS & TOOLS

6.7 System Select

Allows you to set up the phone

management environment. Leave

this setting as the default unless

you want to alter system selection

as instructed by your service

provider.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press System Select.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Home Only/ Automatic

6.8 NAM Select

Allows you to select the phone’s

NAM (Number Assignment

Module) if the phone is registered

with multiple service providers.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press NAM Select.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

NAM1/ NAM2

6.9 Auto NAM

Allows the phone to automatically

switch between programmed

telephone numbers corresponding

to the service provider area.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Auto NAM.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

On/ Off

7. Call Settings

The Call Settings Menu allows you

to designate how the phone

handles both incoming and

outgoing calls.

7.1 Answer Options

Allows you to determine how the

phone will answer an incoming call.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Call Settings.

4. Press Answer Options.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Slide Up/ OK Key/ Auto with

Handsfree

NOTE

Auto with Handsfree is available

only when any external device is

connected to your phone.

When the following settings are set,

Ringer is not activated.

●When All Sounds Off / Alarm

Only is set or individual Contact

Ringer ID is set to No Ring/

Silence.

●When Ringer is set to mute with

side key or "Quiet".

7.2 End Call Options

Allows you to determine how the

phone will disconnect a call.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Call Settings.

4. Press End Call Options.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Slide Down / OK Key

SETTINGS & TOOLS

7.3 Auto Retry

Allows you to set the length of time

the phone waits before

automatically redialing a number

when the attempted call fails.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Call Settings.

4. Press Auto Retry.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Off/ Every 10 Seconds/ Every 30

Seconds/ Every 60 Seconds

7.4 TTY Mode

Allows you to attach a TTY device

enabling you to communicate with

parties also using a TTY device. A

phone with TTY support is able to

translate typed characters to voice.

Voice can also be translated into

characters and then displayed on

the TTY.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Call Settings.

4. Press TTY Mode.

An explanation message is

displayed.

Menu User Feature

Transmission/

Receiving Mode

When making

communications with a

normal terminal

TTY Full

For hearing-/

verbally-

impaired

text message transmission,

text message receiving

Operator

required

TTY +

Talk

For hearing-

impaired able to talk voice transmission, text

message receiving

Operator

required

TTY +

Hear

For verbally-

impaired audible text message transmission,

voice receiving

Operator

required

TTY Off

voice transmission, voice

receiving

TTY Mode (Tele Type writer)

5. Press the Center Select Key

to continue.

6. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

TTY Full/ TTY + Talk/ TTY + Hear/

TTY Off

TTY Full: Users who cannot talk

and hear send and receive a text

message through TTY equipment.

TTY + Talk: Users who can talk but

cannot hear receive a text message

and send voice through TTY

equipment.

TTY + Hear: Users who can hear

but cannot talk send a text

message and receive voice through

TTY equipment.

TTY Off: Users send and receive

without TTY equipment.

Connecting TTY Equipment and a

Terminal

1. Connect a TTY cable to TTY

connection on the terminal (TTY

connection location is the same

as a headset jack).

2. Enter the phone menu and set up

the desired TTY mode.

3. After setting a TTY mode, check

the LCD screen of the phone for

the TTY icon.

4. Connect the TTY equipment to

the power source and turn it on.

5. Make a phone connection to the

desired number.

6. When connection is made, use

the TTY equipment to type in and

send a text message or send

voice.

7. The voice or text message from

the receiver end displays on the

TTY equipment display.

7.5 One Touch Dial

Allows you to initiate a speed dial

call by pressing and holding the

speed dial digit. If set to Off, Speed

Dial numbers designated in your

Contacts will not function.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Call Settings.

4. Press One Touch Dial.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

On/ Off

SETTINGS & TOOLS

7.6 Voice Privacy

Allows you to set the voice privacy

feature for CDMA calls. CDMA

offers inherent voice privacy. Check

with your service provider for

availability.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Call Settings.

4. Press Voice Privacy.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

On/ Off

7.7 DTMF Tones

Allows you to set the DTMF tone

length.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Call Settings.

4. Press DTMF Tones.

5. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Normal/ Long

8. USB Auto Detection

Your phone automatically detects a

USB device when it is connected to

your phone for Sync Music or Sync

Data operation. If the option is set

to Ask On Plug, you are asked to

confirm whenever the connection is

made.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press USB Auto Detection.

4. Use the Directional Key to

highlight a setting, then press the

Center Select Key .

Sync Music/ Sync Data/ Ask On

Plug

9. Memory

Allows you to check your

internal phone memory as well as

the microSD external memory.

The can access the

following file types stored on the

removable microSD card.

My Pictures: png, jpg, bmp, gif

My Sounds: mid, qcp (used for

MMS, cannot be set as ringtones)

My Videos: 3gp, 3g2

My Music: wma, mp3

9.1 Save Options

Allows you to select which memory

(phone or memory card) to use to

save your files.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Memory.

4. Press Save Options.

5. Highlight Pictures/ Videos/

Sounds then press the Center

Select Key .

6. Highlight Phone Memory/ Card

Memory then press the Center

Select Key .

9.2 Phone Memory

Shows the memory information

saved in your phone.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Memory.

4. Press Phone Memory.

5. Highlight Memory Usage/ My

Pictures/ My Videos/ My Music/

My Sounds then press the

Center Select Key to view

the memory used for each item.

Store on

microSD

Card

Transfer

Phone to

PC via

Card

Transfer

PC to

Phone

via Card

V CAST

Music/ WMA

Songs

W W W

Ringtones

Sound

W W W

V CAST

Video Clips

Downloaded

Picture/

Video

Picture/

Video (user-

generated or

received via

MMS)

W W W

SETTINGS & TOOLS

9.3 Card Memory

Shows the memory information

saved in the card.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Memory.

4. Press Card Memory.

5. Highlight Memory Usage/ My

Pictures/ My Videos/ My Music/

My Sounds then press the

Center Select Key .

NOTE

The option Card Memory Usage

shows the total used memory and

memory space remaining.

NOTE

Do not insert or remove the microSD

while playing, deleting or downloading

Pictures/Videos/ Music/Sounds.

0. Phone Info

Allows you to view the information

specific to your phone and software.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Info.

0.1 My Number

Allows you to view your phone

number.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Info.

4. Press My Number.

0.2 SW/HW Version

Allows you to view the versions of

various applications such as SW,

PRL, ERI, Browser, Media Center,

AVR, MMS, Bluetooth, MSUI, HW,

MEID Version, and Warranty Date

Code.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Info.

4. Press SW/HW Version.

0.3 Icon Glossary

Allows you to view all the icons and

their meanings.

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Phone Info.

4. Press Icon Glossary.

0.4 Software Update

This feature gives your phone the

ability to upgrade to the latest

software and keeps your phone

operating with the latest features

without visiting a Verizon Wireless

Communications Store for the

upgrade. You can either be notified

automatically that there is an

updated version of software

available for your phone, or you can

manually check to see if there are

any updates available for you to

download.

Automatic Update

Your phone will receive a

notification that there is an updated

version of software available to be

downloaded. You can press the

Center Select Key when

notified that a download is available

or it can happen automatically.

Once the download is complete you

may, depending on the nature of the

update, have three options

available: Accept the update, Defer

the update, or Reject the update.

NOTE

During the update you cannot make

or receive phone calls, including 911

calls, or text messages.

Manual Update

With the slide open, press the

Center Select Key

[MENU].

2. Press Settings & Tools

3. Press Phone Info.

4. Press

Software Update

The two options shown will be

Status and Check New.

Press Status to see the

status of a download or update

and see information on the last

successful update. If updates have

not yet been performed, status

information will be unavailable.

Press Check New to check

if any new software updates are

available to download. If a newer

software version is available, it will

automatically begin downloading

after 30 seconds or you can begin

the download immediately by

press the Center Select Key .

To stop the software download

press the Right Soft Key [Quit].

How to use Bluetooth Headset

w t

o U

e t

y B

h®

Front

Back

Charging Adapter

Charging

NOTE

It's recommended that you fully

charge your Bluetooth®

Headset before use. You can

recharge the headset by attaching it to

the phone or to the Bluetooth Headset

Charging Adapter and connecting it to

the charger.

- Insert the bottom of the headset

into the charging adapter. Push

the headset down until it clicks

into place.

- When connected to the charger,

with power on or off, the headset

will not turn off. While charging,

the LED indicator will show a solid

red light.

- The buttons will not function

while the device is charging.

- It takes 2 hours and 15 minutes to

fully charge the headset.

- When charging is complete, the

LED indicator will turn off.

Low battery

-A low battery tone will play once

every 30 seconds.

- If the battery is not charged, the

headset will turn off.

Power on

- Press and Hold the PWR/Call

button for 3 seconds.

The power will turn on and a

booting tone will play.

PWR/Call Button

Volume Up / Down Button

LED indicator

Speaker MIC

Charger Terminal

Charging Port

Release Latch

- The Decoy Bluetooth Headset -

●Talk Time: Up to 2 hours

●Standby Time: Up to 80 hours

Power off

- Press and hold the PWR/Call

button for 5 seconds.

A shutdown tone will play, the

Bluetooth link will disconnect,

and the power will turn off.

Pairing

Before using the Decoy Bluetooth

headset for the first time, it must be

paired with the handset. There are

three Pairing Mode methods:

●Decoy Headset Wizard (see

page 72)

●Easy Pairing

●Manual Pairing

NOTES ●

If your headset has been

paired to the handset

previously, the headset will

automatically reconnect to the

handset when you power it

on.

●

The headset automatically

turns off if it is left in Pairing

Mode for three minutes

without being connected to a

handset.

●

To pair with a different device

in the future, it must be

placed in Pairing Mode.

Easy Pairing

1. Turn on the Decoy HS device

(Decoy Bluetooth headset).

Press and hold the PWR/Call

button for 3 seconds.

- The headset enters Auto-

Reconnect mode for 10 seconds

- After 10 seconds, the headset

automatically enters Pairing

Mode and the LED indicator

lights to solid blue.

2. Set your handset to Pairing

Mode.

- With the slide open, press the

Center Select Key [MENU],

then .

- Press Bluetooth Menu.

- Press Add New Device.

3. Select the Decoy Bluetooth

headset for pairing.

- Highlight LG Decoy HS from the

list of devices, then press the

Center Select Key [Pair] to

pair it with your handset.

- If asked for a pass code, enter

“0000” (4 zeros).

- Once pairing has completed

successfully, a beep will sound.

4. Connect the headset and

handset.

- Press the Center Select Key

Yes when asked if you want to

connect to the headset.

How to use Bluetooth Headset

Manual Pairing

1. Turn on the Decoy HS device

(Decoy Bluetooth headset).

Press and hold the PWR/Call

button for 5 seconds.

- The headset enters Pairing

Mode and the LED indicator

lights to solid blue.

2. Set your handset to Pairing

Mode.

3. Select the Decoy Bluetooth

headset for pairing.

4. Connect the headset and

handset.

Using the Decoy Headset

Auto Reconnect

The headset and handset will

disconnect if the headset is turned

off (accidentally or intentionally)

while connected to a handset. The

headset and handset will

automatically reconnect when the

headset is turned back on within

the required range (30 feet or 10

meters).

Out of range

When the headset and handset are

separated by a distance of 30 feet

(10 meters) or more, they will

disconnect. When brought back

within the required distance, the

headset will automatically

reconnect with the handset. If the

headset and handset do not

automatically reconnect when they

are back within the required range,

briefly press the PWR/Call button

on the headset to reconnect

manually.

Out of Range

The headset automatically turns off

if it is left in out of range for 1 hour.

Volume control

There are eight levels of speaker

volume for the headset. Press the

Volume Up or Volume Down button

on the side of the headset to adjust

the volume as needed.

PWR/Call Button on the headset

The PWR/Call Button on the

headset is used for a variety of

functions depending on when and

how long it is pressed (see charts

on pages 73 and 97).

Calling

To use the headset for calls, the

headset and handset need to be

paired and connected first.

Answering a call

The headset will ring (the handset

plays a ringtone, if set) when you

have an incoming call. To answer it,

briefly press the PWR/Call button

on the headset.

Making a call using the handset

If you make a call from the handset,

the call will (depending on your

phone settings) automatically

transfer to the headset. If it doesn’t,

you can manually transfer the call

by briefly pressing the PWR/Call

button on the headset.

Last number redial*

Press and hold the PWR/Call button

on the headset for 1 second to

redial the last number. The headset

will beep, then initiate the call.

Voice dialing*

Briefly press the PWR/Call button

on the headset to activate the

Voice Command feature. For the

best results, use your headset to

customize the Train Voice setting in

the Voice Commands menu.

Ending a call

Briefly press the PWR/Call button

on the headset. You can also

end a call by pressing the on

the handset.

Transfer to and from the headset*

You can change from using the

handset to using the headset during

a call, but to do so the headset and

handset need to be paired. Briefly

press the PWR/Call button on

the headset (you see the message

on the LCD that the call is being

transferred to the headset) to

transfer the audio to the headset. To

transfer a call from the headset

back to the handset, press and hold

Volume Up button on the headset

for 5 seconds.

Call waiting*

Answer a second call without

hanging up the first call by pressing

the PWR/Call button on the

headset for 1 second. Press it again

for 1 second to return to the original

call. To end both calls at once,

briefly press the PWR/Call button

Call Reject*

Activate Call Reject by pressing the

PWR/Call button on the headset

for 1 second when the headset

rings.

* These functions are only available

when your handset supports

them. For further information

about using these features,

please consult your handset’s

user manual.

How to use Bluetooth Headset

LED indication

Function Decoy HS Status Action

Operating

Power on The blue LED light flickers 4 times.

Power off The blue LED light flickers 4 times

and then turns off.

Pairing mode The blue LED light stays on.

Headset /

handsfree Profile

connected

The blue LED light flickers

2 times every 7 seconds.

Call connected The blue LED light flickers

2 times every 7 seconds.

Charging

Charging The red LED stays on.

Charging

complete LED turns off.

Charging time

It takes about two hours and fifteen minutes to charge.

For below case:

●Charging Time for charging the BT headset with the BT Headset charging

adapter.

●Charging Time for charging the BT headset with the device together with

the TA adapter.

Function Decoy HS Status Action

Power on Power off Press the PWR/Call button for 3 seconds.

Power off Power on Press the PWR/Call button for at least

5 seconds.

Volume up Talking Briefly press the Volume Up button.

Volume down Talking Briefly press the Volume Down button.

Transferring

a call Talking

- Handset to Headset

Briefly press the PWR/Call button

(must be paired)

- Headset to Handset

Press and hold the Volume Up button

for 5 seconds.

Answering a call Ringing Briefly press the PWR/Call button.

Ending a call Talking Briefly press the PWR/Call button.

Call waiting Talking Press the PWR/Call button for 1 seconds.

Last number

redial Idle Press the PWR/Call button for 3 seconds.

Voice dialing

(handset must

support)

Idle Briefly press the PWR/Call button.

Call reject Ringing Press the PWR/Call button for 3 seconds.

Pairing Mode

(Manual) Power off Press the PWR/Call button for 5 seconds.

Summary of button functions

How to multi-connection with Decoy Handset

w t

o m

-c

n w

h H

Possible Single Connection Cases

You can tell the Bluetooth Connection from the Bluetooth icon color.

- White Bluetooth Icon: Single connection

- Blue Bluetooth Icon: Multi connection

My HS Only Car Kit Only Mono HS Only Stereo HS Only

Possible Multi-Connections Cases

My HS + Car Kit My HS + Mono HS My HS + Stereo HS

TIP

White background indicates Single connection

TIP

White background indicates Multi-connection

During a call - Only My HS connected

My HS is detached from the My HS is attached to the

NOTE

User can either go to “Options” to select “4. Audio to Phone” or attach My HS to his or her

to transfer audio to the phone and vice versa.

During a call - Only Car Kit Connected

Audio transfer is initiated by user

During a call - Only Mono/Stereo HS Connected

Audio transfer is initiated by user

My HS Icon No Icon

My HS Icon

No Icon: Audio is routed

to the phone

Mono

HS Icon

No Icon: Audio is routed

to the phone

100

How to multi-connection with Decoy Handset

During a call - My HS + Car Kit

BT Connection with Car kit is dropped Audio is routed to My HS

NOTE

In order to ensure full compatibility with the car kits , the audio is always routing to the car kit

unless the connection with the car kit is dropped.

During a call - My HS + Mono/Stereo HS

My HS’s connection is dropped Audio is routed to Mono HS

Attach My HS to the VX8610 Audio is routed to Mono HS

NOTE

The does not drop BT connection with My HS when it’s attached to the phone for

user’s convenience. LG believes it is so much easier for user to transfer audio this way rather

than going thru the phone’s menu to select “4. transfer audio to phone”.

101

Detach My HS to the Audio is routed to Mono HS

NOTE

The does not drop BT connection with My HS when it’s attached to the phone for

user’s convenience. LG believes it is so much easier for user to transfer audio this way rather

than going thru the phone’s menu to select “4. transfer audio to phone”.

HS Only ( )

DetachAttach

Phone HS Phone

OOX Voice X

OOX Audio Streaming X

HS ( ) + 2nd Headset ( )

DetachAttach

2nd headset HS 2nd headset

OOX Voice X

O*1 XO

Audio Streaming X

HS ( ) + Car Kit ( )

DetachAttach

Car Kit HS Car Kit

OXO Voice X

O*2 XO

Audio Streaming X

NOTE

The allows multi connections only when one of the devices is " HS" Priority: Car

kit > My Headset Attach/Detach state > 2nd Headset Connection state > Phone's Earpiece

If the 2nd headset supports A2DP

If the car kit supports A2DP

Bluetooth®Sound Case for

102

DTC

1. Speaker

2. Talk Button

3. Volume keys Up/Down Use to adjust the Master Volume.

4. Charger Port Connects the DTC to the battery charger, or other compatible accessory.

5. Speaker Phone on/off Button Use to activate Speakerphone Mode.

6. Microphone Allows other callers to hear you clearly when you are speaking to them.

NOTES ●

Do not connect any USB cable to charger port. Use only LG AC adapter.

●

Even when speakerphone turns off, charging remains available.

●

You can tell the battery charging state by the battery icon on phone screen. This DTC

does not support data transfer or synchronization with PC through USB cable.

5. Speaker Phone On/Off

Button

C O

4. Charger Port

3. Volume keys Up/Down

2. Talk Button

6. Microphone

1. Speaker

103

*Initialization

How to enter DTC Pairing mode

Speakerphone function in DTC is

based on Bluetooth technology.

You need use DTC as Bluetooth

device except charging function.

After powering on the

speakerphone on the located right

side of DTC, just wait until the Blue

LED turns solid. If not, press Talk

Button about 7 seconds. When the

blue solid light around “Talk button”

appears, you need to pair and

connect it with your as

below:

How to pair your

Bluetooth DTC with your

wireless device

1. With the slide open, press the

Center Select Key [MENU].

2. Press Settings & Tools.

3. Press Bluetooth Menu.

4. Press Add New Device.

5. After searching Decoy DC,

proceed with auto pairing.

6. Select Yes for the connection.

*Connection

When you are far from DTC above

10m or power off DTC, BT

connection between your phone

and DTC is disconnected. When

you want to use DTC after

disconnection, you must reconnect

DTC to your phone. There are two

methods of re-connection.

1. When speakerphone function is

off, you can reconnect by turning

the DTC speaker phone on.

2. When speakerphone function is

on, you can reconnect by

pressing “Talk button” briefly.

Pairing

To enter pairing mode, press “Talk

Button” for 7 seconds.

Connection

Re-link with phone(When

disconnected): Press “Talk Button”

briefly.

Auto connection works when the

speakerphone is powered on.

Incoming call

1. Receive call on DTC: Press “Talk

Button” briefly.

2. Receive call on headset: Detach

headset and press “Talk Button”

on headset.

3. Receive call on phone: Power off

speakerphone and slide the

phone up.

104

DTC

Make a call when DTC is

standby mode

1. Activate Voice dial function:

Press “Talk Button” briefly.

2. Redial the last call number:

Press “Talk Button” for 1 second.

3. Dial on keypad: Slide up phone

and dial on keypad.

Transfer call

End call

1. End call: Press “Talk Button”

briefly.

Etc.

1. Reject call: Press “Talk Button”

for 1 seconds.

2. Mute: Press “Volume (-)” for 3

seconds.

Item Indication

Transfer call(DTC --->Headset) Detach headset

Transfer call(DTC --->Phone)

1. Power off the speakerphone located on the right of the DTC.

2. Press "Talk Button" for 1 second.

3. Choose "Audio to Phone" in phone menu.

Transfer call(Headset --->DTC) Attach headset

Transfer call(Headset --->Phone) Attach headset and press "Talk Button" for 1 second.

Transfer call(Phone --->Headset) Detach headset

Transfer call(Phone --->DTC)

1. When speakerphone function is on, press "Talk Button" briefly or

for 1 second.

2. When speakerphone function is off, position speakerphone power

button in “ON”.

3. Choose "Audio to Device" in phone menu.

105

Explanation of light indication

Status Light indication around "Talk" button Audio indication

TA insert to DTC Red solid light is on -

Turn On Red light is off and then blue light blinks fast 4 times 1 short ascending tone

Standby (connected or not) Blue light blinks once per 5 seconds -

Disconnected Intentionally

on Decoy phone - 1 short beep

Speakerphone turned off Blue light blinks fast 4 times and then Red light is on 1 short decending tone

Pairing Blue light is on for 3 minuntes 1 short tone when entering

pairing mode

Pairing Successfully Blue light blinks rapidly 3 times 1 long beep

Connected Successfully - 1 long beep

Mute Blue light blinks once per 1 second 1 short beep

Pairing failed

(3 minutes after entering

pairing mode)

Return to standby status Return to standby status

Use keypad Blue light blinks once per 5 seconds -

Voice Dialing Blue light blinks once per 5 seconds 1 short beep

Ringing Blue light blinks once per 5 seconds Ringing tone

During call Blue light blinks once per 5 seconds -

Transfer call between DTC and

Decoy phone - Beep tone twice

Make Call

Receive Call

Light indication around “Talk Button”

Safety

A S

The following is the complete TIA

Safety Information for wireless

handheld phones.

Exposure to Radio Frequency

Signal

Your wireless handheld portable

phone is a low power radio

transmitter and receiver. When ON,

it receives and sends out Radio

Frequency (RF) signals.

In August, 1996, the Federal

Communications Commissions

(FCC) adopted RF exposure

guidelines with safety levels for

handheld wireless phones. Those

guidelines are consistent with the

safety standards previously set by

both U.S. and international

standards bodies:

ANSI C95.1 (1992) *

NCRP Report 86 (1986)

ICNIRP (1996)

* American National Standards

Institute; National Council on

Radiation Protection and

Measurements; International

Commission on Non-Ionizing

Radiation Protection

Those standards were based on

comprehensive and periodic

evaluations of the relevant

scientific literature. For example,

over 120 scientists, engineers, and

physicians from universities,

government health agencies, and

industry reviewed the available

body of research to develop the

ANSI Standard (C95.1).

The design of your phone

complies with the FCC

guidelines (and those

standards).

Antenna Care

Use only the supplied or an

approved replacement antenna.

Unauthorized antennas,

modifications, or attachments could

damage the phone and may violate

FCC regulations.

Phone Operation

NORMAL POSITION: Hold the

phone as you would any other

telephone with the antenna pointed

up and over your shoulder.

106

Tips on Efficient Operation

For your phone to operate most

efficiently:

Don’t touch the antenna

unnecessarily when the phone is in

use. Contact with the antenna

affects call quality and may cause

the phone to operate at a higher

power level than otherwise needed.

Driving

Check the laws and regulations on

the use of wireless phones in the

areas where you drive and always

obey them. Also, if using your

phone while driving, please observe

the following:

●Give full attention to driving --

driving safely is your first

responsibility;

●Use hands-free operation, if

available;

●Pull off the road and park before

making or answering a call if

driving conditions or the law

require it.

Electronic Devices

Most modern electronic equipment

is shielded from RF signals.

However, certain electronic

equipment may not be shielded

against the RF signals from your

wireless phone.

Pacemakers

The Health Industry Manufacturers

Association recommends that a

minimum separation of six (6)

inches be maintained between a

handheld wireless phone and a

pacemaker to avoid potential

interference with the pacemaker.

These recommendations are

consistent with the independent

research by and recommendations

of Wireless Technology Research.

Persons with pacemakers:

●Should ALWAYS keep the phone

more than six (6) inches from

their pacemaker when the phone

is turned ON;

●Should not carry the phone in a

breast pocket;

●Should use the ear opposite the

pacemaker to minimize the

potential for interference;

●Should turn the phone OFF

immediately if there is any

reason to suspect that

interference is taking place.

107

Safety

Hearing Aids

Some digital wireless phones may

interfere with some hearing aids. In

the event of such interference, you

may want to consult your service

provider (or call the customer

service line to discuss alternatives).

Other Medical Devices

If you use any other personal

medical device, consult the

manufacturer of your device to

determine if it is adequately

shielded from external RF energy.

Your physician may be able to

assist you in obtaining this

information.

Health Care Facilities

Turn your phone OFF in health care

facilities when any regulations

posted in these areas instruct you

to do so. Hospitals or health care

facilities may use equipment that

could be sensitive to external RF

energy.

Vehicles

RF signals may affect improperly

installed or inadequately shielded

electronic systems in motor

vehicles. Check with the

manufacturer or its representative

regarding your vehicle. You should

also consult the manufacturer of

any equipment that has been added

to your vehicle.

Posted Facilities

Turn your phone OFF in any facility

where posted notices so require.

Aircraft

FCC regulations prohibit using your

phone while in the air. Switch OFF

your phone before boarding an

aircraft.

Blasting Areas

To avoid interfering with blasting

operations, turn your phone OFF

when in a “blasting area” or in

areas posted: “Turn off two-way

radio”. Obey all signs and

instructions.

Potentially Explosive Atmosphere

Turn your phone OFF when in any

area with a potentially explosive

atmosphere and obey all signs and

instructions. Sparks in such areas

could cause an explosion or fire

resulting in bodily injury or even

death.

Areas with a potentially explosive

atmosphere are often, but not

108

always marked clearly. Potential

areas may include: fueling areas

(such as gasoline stations); below

deck on boats; fuel or chemical

transfer or storage facilities;

vehicles using liquefied petroleum

gas (such as propane or butane);

areas where the air contains

chemicals or particles (such as

grain, dust, or metal powders); and

any other area where you would

normally be advised to turn off your

vehicle engine.

For Vehicles Equipped with an Air

Bag

An air bag inflates with great force.

DO NOT place objects, including

either installed or portable wireless

equipment, in the area over the air

bag or in the air bag deployment

area. If in-vehicle wireless

equipment is improperly installed

and the air bag inflates, serious

injury could result.

y I

Please read and observe the

following information for safe and

proper use of your phone and to

prevent damage. Also, keep the

user guide in an accessible place at

all times after reading it.

Violation of the

instructions may

cause minor or serious damage to

the product.

●Do not disassemble or open

crush, bend or deform, puncture

or shred.

●Do not modify or remanufacture,

attempt to insert foreign objects

into the battery, immerse or

expose to water or other liquids,

expose to fire, explosion or other

hazard.

●Only use the battery for the

system for which it is specified.

●Only use the battery with a

charging system that has been

qualified with the system per

IEEE-Std-1725-2006. Use of an

unqualified battery or charger

may present a risk of fire,

explosion, leakage, or other

hazard.

Caution

109

Safety

●Do not short circuit a battery or

allow metallic conductive

objects to contact battery

terminals.

●Replace the battery only with

another battery that has been

qualified with the system per this

standard, IEEE-Std-1725-2006.

Use of an unqualified battery

may present a risk of fire,

explosion, leakage or other

hazard.

●Promptly dispose of used

batteries in accordance with

local regulations.

●Battery usage by children should

be supervised.

●Avoid dropping the phone or

battery. If the phone or battery is

dropped, especially on a hard

surface, and the user suspects

damage, take it to a service

center for inspection.

●At least, one of the

Authentication methods may be

implemented. (e.g. H/W, S/W,

Mechanical, Hologram, etc.)

●Improper battery use may result

in a fire, explosion or other

hazard.

Charger and Adapter Safety

●The charger and adapter are

intended for indoor use only.

●Insert the battery pack charger

vertically into the wall power

socket.

●Only use the approved battery

charger. Otherwise, you may

cause serious damage to your

phone.

●Use the correct adapter for your

phone when using the battery

pack charger abroad.

Battery Information and Care

●Please dispose of your battery

properly or take it to your local

wireless carrier for recycling.

●The battery doesn’t need to be

empty before recharging.

●Use only LG-approved chargers

specific to your phone model

since they are designed to

maximize battery life.

●Do not disassemble or short-

circuit the battery.

●Keep the battery’s metal

contacts clean.

●Replace the battery when it no

longer provides acceptable

110

performance. The battery can be

recharged several hundred times

before replacement.

●Recharge the battery after long

periods of non-use to maximize

battery life.

●Battery life will vary due to

usage patterns and

environmental conditions.

●Use of extended backlighting,

Browser, and data connectivity

kits affect battery life and talk/

standby times.

●The self-protection function of

the battery cuts the power of the

phone when its operation is in an

abnormal state. In this case,

remove the battery from the

phone, reinstall it, and turn the

phone on.

Explosion, Shock, and Fire Hazards

●Do not put your phone in a place

subject to excessive dust and

keep the minimum required

distance between the power

cord and heat sources.

●Unplug the power cord prior to

cleaning your phone, and clean

the power plug pin when it’s

dirty.

●When using the power plug,

ensure that it’s firmly connected.

If not, it may cause excessive

heat or fire.

●If you put your phone in a pocket

or bag without covering the

receptacle of the phone (power

plug pin), metallic articles (such

as a coin, paperclip or pen) may

short-circuit the phone. Always

cover the receptacle when not in

use.

●Don’t short-circuit the battery.

Metallic articles such as a coin,

paperclip or pen in your pocket

or bag may short-circuit the +

and – terminals of the battery

(metal strips on the battery) upon

moving. Short-circuit of the

terminal may damage the battery

and cause an explosion.

General Notice

●Using a damaged battery or

placing a battery in your mouth

may cause serious injury.

●Do not place items containing

magnetic components such as a

credit card, phone card, bank

book, or subway ticket near your

phone. The magnetism of the

phone may damage the data

stored in the magnetic strip.

111

Safety

●Talking on your phone for a long

period of time may reduce call

quality due to heat generated

during use.

●When the phone is not used for

a long period time, store it in a

safe place with the power cord

unplugged.

●Using the phone in proximity to

receiving equipment (i.e., TV or

radio) may cause interference to

the phone.

●Do not use the phone if the

antenna is damaged. If a

damaged antenna contacts skin,

it may cause a slight burn.

Please contact an LG Authorized

Service Center to replace the

damaged antenna.

●Do not immerse your phone in

water. If this happens, turn it off

immediately and remove the

battery. If the phone does not

work, take it to an LG Authorized

Service Center.

●Do not paint your phone.

●The data saved in your phone

might be deleted due to careless

use, repair of the phone, or

upgrade of the software. Please

backup your important phone

numbers. (Ringtones, text

messages, voice messages,

pictures, and videos could also

be deleted.) The manufacturer is

not liable for damage due to the

loss of data.

●When you use the phone in

public places, set the ringtone to

vibration so you don't disturb

others.

●Do not turn your phone on or off

when putting it to your ear.

●Use accessories, such as

earphones and headsets, with

caution. Ensure that cables are

tucked away safely and do not

touch the antenna unnecessarily.

112

d p

g l

Prolonged exposure to loud sounds

(including music) is the most

common cause of preventable

hearing loss. Some scientific

research suggests that using

portable audio devices, such as

portable music players and cellular

telephones, at high volume settings

for long durations may lead to

permanent noise induced hearing

loss. This includes the use of

headphones (including headsets,

earbuds and Bluetooth®or other

wireless devices). Exposure to very

loud sound has also been

associated in some studies with

tinnitus (a ringing in the ear),

hypersensitivity to sound and

distorted hearing. Individual

susceptibility to noise-induced

hearing loss and other potential

hearing problems varies.

The amount of sound produced by

a portable audio device varies

depending on the nature of the

sound, the device, the device

settings and the headphones. You

should follow some commonsense

recommendations when using any

portable audio device:

●Set the volume in a quiet

environment and select the

lowest volume at which you can

hear adequately.

●When using headphones, turn

the volume down if you cannot

hear the people speaking near

you or if the person sitting next

to you can hear what you are

listening to.

●Do not turn the volume up to

block out noisy surroundings. If

you choose to listen to your

portable device in a noisy

environment, use noise-

cancelling headphones to block

out background environmental

noise.

●Limit the amount of time you

listen. As the volume increases,

less time is required before your

hearing could be affected.

●Avoid using headphones after

exposure to extremely loud

noises, such as rock concerts,

that might cause temporary

hearing loss. Temporary hearing

loss might cause unsafe volumes

to sound normal.

●Do not listen at any volume that

causes you discomfort. If you

experience ringing in your ears,

113

Safety

hear muffled speech or

experience any temporary

hearing difficulty after listening

to your portable audio device,

discontinue use and consult your

doctor.

You can obtain additional

information on this subject from the

following sources:

American Academy of Audiology

11730 Plaza American Drive, Suite

300

Reston, VA 20190

Voice: (800) 222-2336

Email: info@audiology.org

Internet: www.audiology.org

National Institute on Deafness and

Other Communication Disorders

National Institutes of Health

31 Center Drive, MSC 2320

Bethesda, MD USA 20892-2320

Voice: (301) 496-7243

Email: nidcdinfo@nih.gov

Internet:

http://www.nidcd.nih.gov/health/he

aring

National Institute for Occupational

Safety and Health

Hubert H. Humphrey Bldg.

200 Independence Ave., SW

Washington, DC 20201

Voice: 1-800-35-NIOSH (1-800-356-

4674)

Internet:

http://www.cdc.gov/niosh/topics/no

ise/default.html

114

A C

The U.S. Food and Drug

Administration’s Center

for Devices and

Radiological Health Consumer

Update on Mobile Phones:

1. Do wireless phones pose a

health hazard?

The available scientific evidence

does not show that any health

problems are associated with using

wireless phones. There is no proof,

however, that wireless phones are

absolutely safe. Wireless phones

emit low levels of Radio Frequency

(RF) energy in the microwave range

while being used. They also emit

very low levels of RF when in

standby mode. Whereas high levels

of RF can produce health effects

(by heating tissue), exposure to low

level RF that does not produce

heating effects causes no known

adverse health effects. Many

studies of low level RF exposures

have not found any biological

effects. Some studies have

suggested that some biological

effects may occur, but such

findings have not been confirmed

by additional research. In some

cases, other researchers have had

difficulty in reproducing those

studies, or in determining the

reasons for inconsistent results.

2. What is the FDA's role

concerning the safety of wireless

phones?

Under the law, the FDA does not

review the safety of radiation-

emitting consumer products such

as wireless phones before they can

be sold, as it does with new drugs

or medical devices. However, the

agency has authority to take action

if wireless phones are shown to

emit Radio Frequency (RF) energy

at a level that is hazardous to the

user. In such a case, the FDA could

require the manufacturers of

wireless phones to notify users of

the health hazard and to repair,

replace, or recall the phones so

that the hazard no longer exists.

Although the existing scientific data

does not justify FDA regulatory

actions, the FDA has urged the

wireless phone industry to take a

number of steps, including the

following:

●Support needed research into

possible biological effects of RF

of the type emitted by wireless

phones;

115

Safety

●Design wireless phones in a way

that minimizes any RF exposure

to the user that is not necessary

for device function; and

●Cooperate in providing users of

wireless phones with the best

possible information on possible

effects of wireless phone use on

human health.

The FDA belongs to an interagency

working group of the federal

agencies that have responsibility

for different aspects of RF safety to

ensure coordinated efforts at the

federal level. The following

agencies belong to this working

group:

●National Institute for

Occupational Safety and Health

●Environmental Protection

Agency

●Occupational Safety and Health

Administration

●National Telecommunications

and Information Administration

The National Institutes of Health

participates in some interagency

working group activities, as well.

The FDA shares regulatory

responsibilities for wireless phones

with the Federal Communications

Commission (FCC). All phones that

are sold in the United States must

comply with FCC safety guidelines

that limit RF exposure. The FCC

relies on the FDA and other health

agencies for safety questions about

wireless phones.

The FCC also regulates the base

stations that the wireless phone

networks rely upon. While these

base stations operate at higher

power than do the wireless phones

themselves, the RF exposures that

people get from these base stations

are typically thousands of times

lower than those they can get from

wireless phones. Base stations are

thus not the subject of the safety

questions discussed in this

document.

3. What kinds of phones are the

subject of this update?

The term “wireless phone” refers

here to handheld wireless phones

with built-in antennas, often called

“cell”, “mobile”, or “PCS” phones.

These types of wireless phones can

expose the user to measurable

Radio Frequency (RF) energy

because of the short distance

between the phone and the user’s

head.

These RF exposures are limited by

FCC safety guidelines that were

116

developed with the advice of the

FDA and other federal health and

safety agencies. When the phone is

located at greater distances from

the user, the exposure to RF is

drastically lower because a

person's RF exposure decreases

rapidly with increasing distance

from the source. The so-called

“cordless phones,” which have a

base unit connected to the

telephone wiring in a house,

typically operate at far lower power

levels, and thus produce RF

exposures far below the FCC safety

limits.

4. What are the results of the

research done already?

The research done thus far has

produced conflicting results, and

many studies have suffered from

flaws in their research methods.

Animal experiments investigating

the effects of Radio Frequency (RF)

energy exposures characteristic of

wireless phones have yielded

conflicting results that often cannot

be repeated in other laboratories. A

few animal studies, however, have

suggested that low levels of RF

could accelerate the development

of cancer in laboratory animals.

However, many of the studies that

showed increased tumor

development used animals that had

been genetically engineered or

treated with cancer-causing

chemicals so as to be pre-disposed

to develop cancer in the absence of

RF exposure. Other studies exposed

the animals to RF for up to 22 hours

per day. These conditions are not

similar to the conditions under

which people use wireless phones,

so we do not know with certainty

what the results of such studies

mean for human health. Three large

epidemiology studies have been

published since December 2000.

Between them, the studies

investigated any possible

association between the use of

wireless phones and primary brain

cancer, glioma, meningioma, or

acoustic neuroma, tumors of the

brain or salivary gland, leukemia, or

other cancers. None of the studies

demonstrated the existence of any

harmful health effects from

wireless phone RF exposures.

However, none of the studies can

answer questions about long-term

exposures, since the average

period of phone use in these

studies was around three years.

117

Safety

5. What research is needed to

decide whether RF exposure from

wireless phones poses a health

risk?

A combination of laboratory studies

and epidemiological studies of

people actually using wireless

phones would provide some of the

data that are needed. Lifetime

animal exposure studies could be

completed in a few years. However,

very large numbers of animals

would be needed to provide reliable

proof of a cancer promoting effect,

if one exists. Epidemiological

studies can provide data that is

directly applicable to human

populations, but ten or more years

follow-up may be needed to provide

answers about some health effects,

such as cancer. This is because the

interval between the time of

exposure to a cancer-causing

agent and the time tumors develop

— if they do — may be many, many

years. The interpretation of

epidemiological studies is

hampered by difficulties in

measuring actual RF exposure

during day-to-day use of wireless

phones. Many factors affect this

measurement, such as the angle at

which the phone is held, or which

model of phone is used.

6. What is the FDA doing to find out

more about the possible health

effects of wireless phone RF?

The FDA is working with the U.S.

National Toxicology Program and

with groups of investigators around

the world to ensure that high

priority animal studies are

conducted to address important

questions about the effects of

exposure to Radio Frequency (RF)

energy.

The FDA has been a leading

participant in the World Health

Organization International Electro

Magnetic Fields (EMF) Project

since its inception in 1996. An

influential result of this work has

been the development of a detailed

agenda of research needs that has

driven the establishment of new

research programs around the

world. The project has also helped

develop a series of public

information documents on EMF

issues.

The FDA and the Cellular

Telecommunications & Internet

Association (CTIA) have a formal

Cooperative Research And

Development Agreement (CRADA)

to do research on wireless phone

safety. The FDA provides the

scientific oversight, obtaining input

118

from experts in government,

industry, and academic

organizations. CTIA-funded

research is conducted through

contracts with independent

investigators. The initial research

will include both laboratory studies

and studies of wireless phone

users. The CRADA will also include

a broad assessment of additional

research needs in the context of

the latest research developments

around the world.

7. How can I find out how much

Radio Frequency energy exposure I

can get by using my wireless

phone?

All phones sold in the United States

must comply with Federal

Communications Commission (FCC)

guidelines that limit Radio

Frequency (RF) energy exposures.

The FCC established these

guidelines in consultation with the

FDA and the other federal health

and safety agencies. The FCC limit

for RF exposure from wireless

phones is set at a Specific

Absorption Rate (SAR) of 1.6 watts

per kilogram (1.6 W/kg). The FCC

limit is consistent with the safety

standards developed by the

Institute of Electrical and Electronic

Engineering (IEEE) and the National

Council on Radiation Protection and

Measurement. The exposure limit

takes into consideration the body’s

ability to remove heat from the

tissues that absorb energy from the

wireless phone and is set well

below levels known to have effects.

Manufacturers of wireless phones

must report the RF exposure level

for each model of phone to the FCC.

The FCC website

(http://www.fcc.gov/oet/rfsafety)

gives directions for locating the FCC

identification number on your

phone so you can find your phone’s

RF exposure level in the online

listing.

8. What has the FDA done to

measure the Radio Frequency

energy coming from wireless

phones?

The Institute of Electrical and

Electronic Engineers (IEEE) is

developing a technical standard for

measuring the Radio Frequency

(RF) energy exposure from wireless

phones and other wireless

handsets with the participation and

leadership of FDA scientists and

engineers. The standard,

“Recommended Practice for

Determining the Spatial-Peak

119

Safety

Specific Absorption Rate (SAR) in

the Human Body Due to Wireless

Communications Devices:

Experimental Techniques”, sets

forth the first consistent test

methodology for measuring the rate

at which RF is deposited in the

heads of wireless phone users. The

test method uses a tissue-

simulating model of the human

head. Standardized SAR test

methodology is expected to greatly

improve the consistency of

measurements made at different

laboratories on the same phone.

SAR is the measurement of the

amount of energy absorbed in

tissue, either by the whole body or

a small part of the body. It is

measured in watts/kg (or

milliwatts/g) of matter. This

measurement is used to determine

whether a wireless phone complies

with safety guidelines.

9. What steps can I take to reduce

my exposure to Radio Frequency

energy from my wireless phone?

If there is a risk from these

products — and at this point we do

not know that there is — it is

probably very small. But if you are

concerned about avoiding even

potential risks, you can take a few

simple steps to minimize your

exposure to Radio Frequency (RF)

energy. Since time is a key factor in

how much exposure a person

receives, reducing the amount of

time spent using a wireless phone

will reduce RF exposure. If you

must conduct extended

conversations by wireless phone

every day, you could place more

distance between your body and

the source of the RF, since the

exposure level drops off

dramatically with distance. For

example, you could use a headset

and carry the wireless phone away

from your body or use a wireless

phone connected to a remote

antenna. Again, the scientific data

does not demonstrate that wireless

phones are harmful. But if you are

concerned about the RF exposure

from these products, you can use

measures like those described

above to reduce your RF exposure

from wireless phone use.

10. What about children using

wireless phones?

The scientific evidence does not

show a danger to users of wireless

phones, including children and

teenagers. If you want to take steps

to lower exposure to Radio

120

Frequency (RF) energy, the

measures described above would

apply to children and teenagers

using wireless phones. Reducing

the time of wireless phone use and

increasing the distance between

the user and the RF source will

reduce RF exposure.

Some groups sponsored by other

national governments have advised

that children be discouraged from

using wireless phones at all. For

example, the government in the

United Kingdom distributed leaflets

containing such a recommendation

in December 2000. They noted that

no evidence exists that using a

wireless phone causes brain

tumors or other ill effects. Their

recommendation to limit wireless

phone use by children was strictly

precautionary; it was not based on

scientific evidence that any health

hazard exists.

11. What about wireless phone

interference with medical

equipment?

Radio Frequency (RF) energy from

wireless phones can interact with

some electronic devices. For this

reason, the FDA helped develop a

detailed test method to measure

Electro Magnetic Interference

(EMI) of implanted cardiac

pacemakers and defibrillators from

wireless telephones. This test

method is now part of a standard

LG Electronics USA VX8610-DC Bluetooth Handsfree DTC User Manual Layout 1

LG Electronics USA Bluetooth Handsfree DTC Layout 1

Manual

Navigation menu

Namespaces

Views

Navigation