LG Electronics USA W2343TV LCD Monitor User Manual Lx6WTG Q ENG

LG Electronics USA LCD Monitor Lx6WTG Q ENG

Contents

User manual 2

A5Connecting the DisplayBefore setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display1. Adjust the position of the panel in various ways for maximum comfort.Tilt Range: -5˚~15˚ ErgonomicIt is recommended that in order to maintain an ergonomic and comfortable viewingposition, the forward tilt angle of the monitor should not exceed 5 degrees.15
A6Using the Computer1. Make sure to turn off the computer and product. Connect the cable as below sketch mapform to .12. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.(Only Analog Mode)2Connecting the DisplayABCNOTE‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the userconnects the monitor for the first time, this function automatically adjusts the display to optimal settings for individualinput signals. ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tiltedscreen while using the device or after changing screen resolution, press the AUTO/SET function button to improveresolution. NOTEThis is a simplified representation of the rear view.This rear view represents a general model; your display may differ from the view asshown.User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) withferrite cores to maintain standard compliance for the product. Connect DVI-D CableConnect D-sub Cable (PC)Connect D-sub Cable (Mac)Mac adapterDVI-D(This feature is not available in all countries.)Varies according to model.Signal CableFor Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.Wall-outlet typePower Cord
Using the cable holderCable holderConnecting the DisplayNEPO1 23EPO N4Connecting the DisplayA7NOPE
Control Panel FunctionsMENU ButtonUse this button to enter or exit the On Screen Display.OSD LOCKED/UNLOCKEDThis function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushingthe MENU button for several seconds. The message"OSD UNLOCKED" should appear.Front Panel ControlsFUN ButtonUse this button to enter 4:3 IN WIDE,PHOTO EFFECT items, for more information, refer to page A16.A8
Control Panel FunctionsUse this button to turn the display on or off.Power ButtonPower IndicatorUse this button to enter a selection in the On Screen Display.AUTO/SETButtonAUTO IMAGE ADJUSTMENTWhen adjusting your display settings, always pressthe AUTO/SET button before entering the On ScreenDisplay(OSD). This will automatically adjust yourdisplay image to the ideal settings for the currentscreen resolution size (display mode).The best display mode isButtonsUse these buttons to select or adjust functions in theOn Screen Display.For more information, refer to page A15.Use this button to make D-Sub or DVI connectoractive. This feature is used when two computers areconnected to the display. The default setting is D-Sub.-W2043T : 1600 x 900-W2243T/W2343T : 1920 x 1080This Indicator lights up as red when the display isoperating normally(On Mode). If the display is inSleep Mode (Energy Saving), this indicator colorchanges to flicker.A9
On Screen Display (OSD) Control AdjustmentScreen AdjustmentMaking adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The following section is an outline of the available adjustments and selectionsyou can make using the OSD.To make adjustments in the On Screen Display, follow these steps:Press the MENU Button, then the main menu of the OSD appears.To access a control, use the or Buttons. When the icon you wantbecomes highlighted, press the AUTO/SET Button.Use the / Buttonsto adjust the image to the desired level. Use theAUTO/SET Button to select other sub-menu items.Push the MENU Buttononce to return to the main menu to select anotherfunction. Push the MENU Buttontwice to exit from the OSD.NOTEAllow the display to stabilize for at least 30 minutes before making image adjustments.AUTO/SETMENU MENUA10
NOTEThe order of icons may differ depending on the model (A11~A17).On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus.To adjust the brightness,contrast and gamma of thescreenPICTUREPHOTO EFFECT4:3 IN WIDECOLORTRACKINGSETUPMain menu Sub-menu A D ReferencePRESETREDGREENBLUETo adjust the position of thescreenTo customize the color ofthe screenTo customize the screenstatus for a user's operatingenvironmentTo improve the clarity andstability of the screen BRIGHTNESSCONTRASTGAMMAHORIZONTALVERTICALCLOCKPHASESHARPNESSWHITE BALANCEPOWER INDICATORFACTORY RESETLANGUAGEOSDHORIZONTALPOSITION VERTICALsRGB6500K9300K: AdjustableA : Analog InputD : Digital InputTo select or customize desired image settingsFLATRONF-ENGINEMOVIEINTERNETUSERNORMALDEMOA11
On Screen Display(OSD) Selection and Adjustment NOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.Press the MENU Button, then the main menu of the OSD appears.Sub-menusMenu NameIconsMain MenuButton TipMENU : Exit: Adjust (Decrease/Increase)SET : Enter: Select another sub-menu100 70A12
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionBRIGHTNESSCONTRAST GAMMATo adjust the brightness of the screen. To adjust the contrast of the screen.Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues display high contrast images.PICTUREPRESETREDGREENBLUESelect the screen color. • sRGB: Set the screen color to fit theSRGB standard colorspecification.• 6500K: Slightly reddish white.• 9300K: Slightly bluish white.Set your own red color levels.Set your own green color levels.Set your own blue color levels.COLORPICTURECOLORMENU : Exit: Decrease: IncreaseSET : Select another sub-menuMENU : Exit: Decrease: IncreaseSET : Select another sub-menu100 70A13
MENU : Exit: Decrease: IncreaseSET : Select another sub-menuOn Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionCLOCKPHASESHARPNESSTo minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange.To adjust the focus of the display. This item allows you to remove anyhorizontal noise and clear or sharpenthe image of characters.To adjust the clearness of the screen.HORIZONTALVERTICALTo move image left and right.To move image up and down.TRACKINGTRACKING906A14
On Screen Display(OSD) Selection and Adjustment SETUPSETUPMENU : Exit: Adjust: AdjustSET : Select anothersub-menuIf this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled onlywhen the input signal is an analog signal. To choose the language in which thecontrol names are displayed.To adjust position of the OSD windowon the screen.LANGUAGEOSDPOSITIONWHITEBALANCEFACTORYRESETIf the output of the video card is differentthe required specifications, the color levelmay deteriorate due to video signaldistortion. Using this function, the signallevel is adjusted to fit into the standardoutput level of the video card in order toprovide the optimal image.Activate this function when white andblack colors are present in the screen. POWERINDICATORRestore all factory default settings except"LANGUAGE." Press the button to reset immediately.Use this function to set the powerindicator on the front side of the monitorto ON or OFF.If you set OFF, it will go off. If you set ON at any time, the powerindicator will automatically be turned on.Main menu Sub menu DescriptionA15
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionThe OSD screen will appear when you touch the FUN button on the left bottom of themonitor.4:3 IN WIDE To select the image size of the screen.WIDE 4:3• WIDE : Switch to full screen mode according to input image signal. • 4 : 3 : Change the image signal ratio into 4:3. PHOTO EFFECT•NORMAL :The PhotoEffect function is disabled.•GAUSSIAN BLUR :This option is to add the effect to the screen thatthe dark and sharp image becomes brighter andmore blurred.•SEPIA :This option changes the screen to be Sepia tone.The Sepia tone is brown color tone.•MONOCHROME :This option changed the screen to be Gray tone.The screen image is displayed with just white,black, gray colors.To select the color of the screen.NORMALGAUSSIAN BLURSEPIAMONOCHROMEA16
On Screen Display(OSD) Selection and Adjustment IconsMenu NameSub-menu NameMain menu Sub menu DescriptionMOVIEINTERNETNORMALDEMOUSERThe OSD screen will appear when you touch the button on the left side of the monitor.INTERNET: For text images (Word processing etc.)MOVIE: For animation images in videos or movies This is under normal operating conditions.This is just for advertising to customer in theshops. It’s setting is same with Movie mode andscreen is divided by half.This feature lets you easily select the best desiredimage condition optimized to the environment(ambient illumination, image types etc).UserYou can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment. ...ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.Not appliedGreen enhance Flesh toneColor Enhance0123A17
TroubleshootingNo image appearsCheck the following before calling for service.No image appearsDo you see a "OSD LOCKED" message on the screen?●Is the power cord of thedisplay connected?●●Is the power indicatoramber?●Do you see an "OUT OFRANGE" message onthe screen?●Do you see a "CHECKSIGNAL CABLE"message on thescreen?• Check and see if the power cord is connectedproperly to the power outlet.• If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboard tobring up the screen.• Try to turn on the PC.• This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.• This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.• You can secure the current control settings,so that they cannot be inadvertently changed.You can unlock the OSD controls at any timeby pushing the MENU button for severalseconds: the message “OSD UNLOCKED”will appear.●Do you see “OSDLOCKED” when youpush MENU button?Is the power indicatorlight on?• Press the Power button.A18
TroubleshootingDisplay image is incorrect●Display Position isincorrect.●On the screenbackground, verticalbars or stripes arevisible.●Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting. If the results are unsatisfactory, adjust the imageposition using the H position and V position iconin the on screen display.• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease thevertical bars or stripes using the CLOCK icon inthe on screen display.• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.• Check Control Panel --> Display --> Settingsand adjust the display to the recommendedresolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits(true color).ImportantCheck Control Panel --> Display --> Settings and see if the frequency or theresolution were changed. If yes, readjust the video card to the recommendresolution.If the recommended resolution (optimal resolution) is not selected, letters maybe blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. A19
TroubleshootingHave you installed the display driver?●Have you installed thedisplay driver?●Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message?• Be sure to install the display driver from the displaydriver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver fromour web site: http://www.lge.com.• Make sure to check if the video card supportsPlug&Play function.Display image is incorrect●The screen color ismono or abnormal.●The screen blinks.• Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.• Make sure the video card is properly inserted inthe slot.• Set the color setting higher than 24 bits (true color)at Control Panel - Settings.• Check if the screen is set to interlace mode and ifyes, change it to the recommend resolution.A20
Specifications W2043TNOTEInformation in this document is subject to change without notice.DisplaySync InputVideo InputResolutionPlug&PlayPowerConsumptionDimensions& WeightTilt RangePower InputEnvironmentalConditionsStand Base Power cord 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 50.8 cm0.2766*0.2766 mm pixel pitchHorizontal Freq. Analog : 30 - 83 kHz (Automatic)Digital : 30 - 83 kHz (Automatic)Vertical Freq. 56 - 75 Hz (Automatic)Input Form Separate TTL, Positive/NegativeSOG (Sync On Green), Digital (HDCP)Signal Input 15 pin D-Sub ConnectorDVI - D connector (Digital)Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalMax Analog : VESA 1600 x 900 @60 HzDigital : VESA 1600 x 900 @60 HzRecommend VESA 1600 x 900 @60 HzDDC 2B On Mode : 40 W(Typ.)Sleep Mode ≤1 WOff Mode ≤1 WWith Stand Without StandWidth 48.36 cm / 19.04 inches 48.36 cm / 19.04 inchesHeight 37.68 cm / 14.83 inches 31.40 cm / 12.36 inches Depth 18.30 cm / 7.20 inches 6.30 cm / 2.48 inchesNet 3.2 kg (7.11 lbs)Tilt -5˚~ 15˚AC 100-240V~ 50/60Hz 1.0A Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingAttached ( ), Detached ( O )Wall-outlet type or PC-outlet typeA21
Specifications W2243TNOTEInformation in this document is subject to change without notice.DisplaySync InputVideo InputResolutionPlug&PlayPowerConsumptionDimensions& WeightTilt RangePower InputEnvironmentalConditionsStand Base Power cord 21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coatingVisible diagonal size: 54.6 cm0.248*0.248 mm pixel pitchHorizontal Freq. Analog : 30 - 83 kHz (Automatic)Digital : 30 - 83 kHz (Automatic)Vertical Freq. 56 - 75 Hz (Automatic)Input Form Separate TTL, Positive/NegativeSOG (Sync On Green), Digital (HDCP)Signal Input 15 pin D-Sub ConnectorDVI - D connector (Digital)Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalMax Analog : VESA 1920 x 1080 @60 HzDigital : VESA 1920 x 1080 @60 HzRecommend VESA 1920 x 1080 @60 HzDDC 2B On Mode : 40 W(Typ.)Sleep Mode ≤1 WOff Mode ≤1 WWith Stand Without StandWidth 51.64 cm / 20.33 inches 51.64 cm / 20.33 inchesHeight 39.60 cm / 15.59 inches 33.27 cm / 13.10 inches Depth 19.80 cm / 7.80 inches 6.20 cm / 2.44 inchesNet 3.82 kg (8.49 lbs)Tilt -5˚~ 15˚AC 100-240V~ 50/60Hz 1.0A Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingAttached ( ), Detached ( O )Wall-outlet type or PC-outlet typeA22A22
Specifications W2343TNOTEInformation in this document is subject to change without notice.DisplaySync InputVideo InputResolutionPlug&PlayPowerConsumptionDimensions& WeightTilt RangePower InputEnvironmentalConditionsStand Base Power cord 23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coatingVisible diagonal size: 58.4 cm0.266*0.266 mm pixel pitchHorizontal Freq. Analog : 30 - 83 kHz (Automatic)Digital : 30 - 83 kHz (Automatic)Vertical Freq. 56 - 75 Hz (Automatic)Input Form Separate TTL, Positive/NegativeSOG (Sync On Green), Digital (HDCP)Signal Input 15 pin D-Sub ConnectorDVI - D connector (Digital)Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalMax Analog : VESA 1920 x 1080 @60 HzDigital : VESA 1920 x 1080 @60 HzRecommend VESA 1920 x 1080 @60 HzDDC 2B On Mode : 45 W(Typ.)Sleep Mode ≤1 WOff Mode ≤1 WWith Stand Without StandWidth 55.52 cm / 21.86 inches 55.52 cm / 21.86 inchesHeight 41.85 cm / 16.48 inches 35.77 cm / 14.08 inches Depth 19.80 cm / 7.80 inches 6.30 cm / 2.48 inchesNet 4.42 kg (9.82 lbs)Tilt -5˚~ 15˚AC 100-240V~ 50/60Hz 1.0A Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingAttached ( ), Detached ( O )Wall-outlet type or PC-outlet typeA23A23
SpecificationsPreset Modes (Resolution)Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)12345678910*11720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681152 x 8641280 x 10241280 x 10241600 x 90031.46831.46937.50037.87946.87548.36360.12367.50063.98179.97660.0007060756075607575607560*Recommend ModeW2043TDisplay Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)1720 x 400 31.468 702640 x 480 31.469 603640 x 480 37.500 754800 x 600 37.879 605800 x 600 46.875 7561024 x 768 48.363 6071024 x 768 60.123 7581152 x 864 67.500 7591280 x 1024 63.981 6010 1280 x 1024 79.976 7511 1680 x 1050 65.290 60*12 1920 x 1080 67.500 60* Recommend ModeW2243T/W2343TIndicatorOn ModeSleep ModeOff ModeRed FlickerOffLED ColorMODEA24
Digitally yours

Navigation menu