LG Electronics USA WB3012 WiFi module User Manual EMISSION TEST REPORT
LG Electronics USA WiFi module EMISSION TEST REPORT
user manual
Order Number : GETEC-C1-12-252 FCC Part 15 subpart C Test Report Number : GETEC-E3-12-089 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: WiFi module FCC ID.: BEJWB3012 Aug. 01, 2012 [Wi-Fi Network Controller Module] HWM-300 Wi-Fi Network Controller Module User Manual Contact Us Tel. Weekday: AM 10 : 00 ~ PM 5 : 00 (Customer support time could be change, according to company’s circumstances) Homepage : Location : LG Electronics Copyright © LG Electronics. All Rights Reserved. Aug. 01, 2012 [Wi-Fi Network Controller Module] Document Revision History Date Revision Changes Copyright © LG Electronics. All Rights Reserved. Aug. 01, 2012 [Wi-Fi Network Controller Module] Table of Contents 1 System Descriptions..........................................................................................................................................6 1.1 Applications ...............................................................................................................................................6 1.2 Module Summary .....................................................................................................................................6 1.3 Block Diagram ……………........................................................................................................ ..............6 2 Mechanical Specifications.................................................................................................................................7 2. 1 Module dimension.....................................................................................................................................7 2.2 Module Pin-out …............................................................................................................................ .........7 3 DC Electrical Specifications….........................................................................................................................7 3.1 Typical Power Consumption…..................................................................................................................7 4 RF Specifications ….......................................................................................................................................8 4.1 RF Characteristics for IEEE 802.11b…....................................................................................................8 4.2 RF Characteristics for IEEE 802.11g …....................................................................................................9 5 Environmental Specifications…........................................................................................................................9 5.1 Absolute maximum ratings …..................................................................................................................9 5.2 Recommended Operating Conditions…..................................................................................................10 6 TELNET or HyperTerminal…......................................................................................................................10 6.1 Demonstration and Test ….......................................................................................................................10 7 Serial Configuration......................................................................................................................................13 7.1 Serial Command …................................................................................................................................13 7.2 Demonstration and Test ….......................................................................................................................13 8 RoHS Declaration............................................................................................................................................14 ※ FCC Notice.........................................................................................................................................................14 Copyright © LG Electronics. All Rights Reserved. Aug. 01, 2012 [Wi-Fi Network Controller Module] Figures Figure 1. HWM-300-L BLOCK DIAGRAM………………...........................................................................6 Figure 2. HWM-300 Dimensions (unit : mm)..................................................................................................7 Figure 3. HWM-300 module Communication Port settings..........................................................................10 Figure 4. Serial Terminal Program configuration...........................................................................................11 Figure 5. Network Terminal Program configuration......................................................................................12 Figure 6. Received Data by Network Terminal Program...............................................................................12 Figure 7. Serial to Wireless LAN configuration.............................................................................................12 Copyright © LG Electronics. All Rights Reserved. Aug. 01, 2012 [Wi-Fi Network Controller Module] Tables Table 1. Interface Connector PIN Assignment.................................................................................................7 Table 2. Typical Power Consumption...............................................................................................................7 Table 3. RF Characteristics for IEEE 802.11b.................................................................................................8 Table 4. RF Characteristics for IEEE 802.11g.................................................................................................9 Table 5. Absolute Maximum Rating................................................................................................................9 Table 6. Recommended Operating Conditions...............................................................................................10 Copyright © LG Electronics. All Rights Reserved. [Wi-Fi Network Controller Module] Aug. 01, 2012 1 System Descriptions 1.1 Applications HWM-300 is a complete low power self-contained embedded wireless solution to address the connectivity demand in M2M applications. It integrates micro-controller, Wi-Fi BB/MAC/RF IC, RF front end, clocks, and on-board antenna into a small form factor module. HWM-300 can be controlled by a host device through a serial interface; it can also serve as a stand-alone Wi-Fi station or network controller. Thus, it can be used to enable wireless connectivity to the simplest products with minimal engineering resources. The HWM-300 provides standard IEEE802.11 b/g functions. The integrated CPU supports software. It can be used for a variety of different applications, such as wireless sensor node, serial to Wi-Fi transceiver, Wi-Fi network controller, Wi-Fi gateway/bridges plus internet server. When used in a system where the HWM-300 is controlled by a host CPU, the serial host interface makes it very easy to integrate. When used in a system without a host CPU, the integrated ARM9 CRUNOS can be used to run a variety of applications. 1.2 Module Summary • 2.4GHz IEEE 802.11b/g radio technology • Dimension: • On-board antenna • Transmit power: +17 dBm @ 11b /11Mbps • Max receive sensitivity: -92dBm • CPU: ARM9 CRUNOS • Diverse serial interface: UART • Operating temperature range: • RoHS compliant 33 mm × 48 mm × 1.2 mm -30ºC to 85ºC 1.3 Block Diagram Figure 1. HWM-300-L BLOCK DIAGRAM Copyright © LG Electronics. All Rights Reserved. [Wi-Fi Network Controller Module] Aug. 01, 2012 2 Mechanical Specifications 2.1 Module dimension Figure 2. HWM-300 Dimensions (unit : mm) 2.2 Module Pin-out No Pin Name Descriptions Input Voltage UART TX DATA UART RX DATA Ground 5V TX RX GND Table 1. Interface Connector PIN Assignment 3 DC Electrical Specifications 3.1 Typical Power Consumption Condition: 25C, includes both Wi-Fi chip and microcontroller Item 11b Receive mode Transmit mode Condition 11Mbps (17dBm/100% Duty Cycle) 11g Receive mode Transmit mode (15dBm/100% Duty Cycle) 54Mbps Min Values Typ 77 Max 300 mA 77 mA 237 mA Units mA Table 2. Typical Power Consumption Copyright © LG Electronics. All Rights Reserved. [Wi-Fi Network Controller Module] Aug. 01, 2012 RF Specifications Items Technology Contents IEEE 802.11b/g, WiFi compliant 2.4 ~ 2.4835 GHz (US/Canada/Europe) 2.4 ~ 2.497 GHz (Japan) DSSS, CCK, OFDM DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM Access Point, Infrastructure USA/Canada: 11 channels Europe: 13 channels France: 7 channels Japan: 14 channels (13 channels for 802.11g) 802.11b = 11, 5.5, 2, 1 Mbps 802.11g = 54, 48, 36, 24, 18, 12, 9, 6 Mbps CSMA/CA with ACK, RTS, CTS TCP/IP, ARP, ICMP, DHCP, DHS, UDAP, TFTP, UDP, PING Disabled, WEP 64 & 128bit, WPA (TKIP), WPA (AES), WPA2 (AES), 802.1x (EAP) Supplicant 802.11I, WPA & WPA2 Enterprise supplicants (EAP-TLS, EAP-TTLS(MSCHAPv2), EAPTTLS(MDS5), EAP-PEAPv0(MSCHAPv2, LEAP), EAP-FAST, LEAP) Supports Certificates and Private Key Upload and Storage (Multiple) *Enterprise and EAP available in client mode only coaxial connectors, 50 ohms Frequency Modulation Technology Modulation Type Network Access Modes Channels Wireless Data Rate MAC Network Protocols Security Protocols Antenna 4.1 DC/RF Characteristics for IEEE 802.11b Conditions: 25deg.C, VDD_WIFI_IN=5V, VDD= 3.3V (11Mbps mode unless otherwise specified.) Measured at 50Ω terminal load connected to the RF Pad Items Tx Power Levels 1Mbps Tx Power Levels 11Mbps Tx Spectrum Mask Fc ± 11MHz Tx Spectrum Mask Fc ± 20MHz Tx RF Carrier Suppression Tx Modulation Accuracy(EVM) Tx OBW(Occupied Bandwidth) Rx Minimum input Level Sensitivity 1Mbps (FER≤8%) Rx Minimum input Level Sensitivity 11Mbps (FER≤8%) Rx Maximum Input Level (FER≤8%) Min. 17 17 -87 Contents Max. 20 20 -30 -50 -15 17 35 20 unit dBm dBm dBr dBr dB MHz -92 -80 dBm -85 -76 dBm Typ. 18 18 -40 -54 -10 dBm Table 3. RF Characteristics for IEEE 802.11b Copyright © LG Electronics. All Rights Reserved. [Wi-Fi Network Controller Module] Aug. 01, 2012 4.2 DC/RF Characteristics for IEEE 802.11g Conditions: 25deg.C, VDD_WIFI_IN=5V, VDD= 3.3V (54Mbps mode unless otherwise specified.) Measured at 50Ω terminal load connected to the RF Pad Items Tx Power Levels 6Mbps Tx Power Levels 24Mbps Tx Power Levels 54Mbps Tx Spectrum Mask Fc ± 11MHz Tx Spectrum Mask Fc ± 20MHz Tx Spectrum Mask Fc ± 30MHz Tx Constellation Error (EVM) 6 Mbps Tx Constellation Error (EVM) 24 Mbps Tx Constellation Error (EVM) 54 Mbps Tx Modulation Accuracy(EVM) Tx OBW(Occupied Bandwidth) Rx Minimum input Level Sensitivity 6Mbps (FER≤10%) Rx Minimum input Level Sensitivity 24Mbps (FER≤10%) Rx Minimum input Level Sensitivity 54Mbps (FER≤10%) Min. 15 15 13 Typ. 16 16 14 -34 -50 -58 -30 -30 -30 17 20 -87 -85 Contents Max. 18 18 16 -20 -28 -40 -5 -16 -25 35 -82 dBm -75 -82 -74 dBm -72 -72 -65 dBm -10 Rx Maximum Input Level (FER≤10%) unit dBm dBm dBm dBr dBr dBr dB dB dB MHz dBm Table 4. RF Characteristics for IEEE 802.11g 5 Environmental Specifications 5.1 Absolute maximum ratings Symbol Top Tst VBAT VDD_WiFi RFin RoHS R Description Operating temperature Min -30 8 max 85 Unit Storage temperature Power supply for backup circuitry when VDD is not present Wi-Fi Power supply RF input power -40 8 85 °C 5.0 V 3.3V 0 dB Bm Restriction of Hazardous Substances °C Compliant Table 5. Absolute Maximum Rating Copyright © LG Electronics. All Rights Reserved. Aug. 01, 2012 [Wi-Fi Network Controller Module] 5.2 Recommended Operating Conditions Parameter VBAT min typ max 4.55 5.0 5.5 Unit CORE_1.2 1.1 1.2 1.3 MAIN_3.3 3.1 3.3 3.5 WIFI_1.2 0.9 1.2 1.35 WIFI_1.8 1.5 1.8 2.5 WIFI_3.3 3.0 3.3 4.0 Table 6. Recommended Operating Conditions 6 TELNET or HyperTerminal You can configure the HWM-300 module by TELNET STEP1: HWM-300 module with Serial to USB Cable to connect to PC. STEP2: HWM-300 module connected to the power adapter. STEP3: Drive Installation and Communication Port settings. - Port Configuration from the Control Panel - System - Hardware - Device Manager, check. - Check the USB Serial port assigned. Figure 3. HWM-300 module Communication Port settings. STEP4: HWM-300 module and the PC IP address settings. - HWM-300 module and wireless connection settings. The HWM-300 module Default SSID is "WLANAP". - HWM-300 module Default IP address is 192.168.1.254. Set to the PC IP address to match the IP band 192.168.1.XXX. 6.1. Demonstration and Test Configure test the functionality of the HWM-300 module. < Hardware > The PC equipped with a USB Port HWM-300 JIG board Copyright © LG Electronics. All Rights Reserved. 10 [Wi-Fi Network Controller Module] Aug. 01, 2012 HWM-300 and JIG Board Connecting Cable PC and connect JIG Board Serial to USB Cable TELNET or HyperTerminal STEP1. ① PC and connect JIG Board Serial to USB Cable. ② HWM-300 and JIG Board Connecting Cable. ③ DC 5V Adaptor connection. ④ Power switch to the ON. STEP2. ① PC's “Network Connection → Wireless Network Connection → HWM-300 wireless network view, select and connect. ② HWM-300 Windows Address window, enter the IP address setting screen is generated Serial input values. (default:192.168.1.254) STEP3. ① PC's Hyper Terminal program execution. HWM-300 and the same baud rate as the value of Setting. a) Baud Rate : 115200 b) Data : 8 bit c) Parity : none d) Stop : 1 bit e) Flow Control : none Figure 4. Serial Terminal Program configuration Run the other HyperTerminal, Setting the IP address and Port Number. Copyright © LG Electronics. All Rights Reserved. 11 Aug. 01, 2012 [Wi-Fi Network Controller Module] Figure 5. Network Terminal Program configuration Input serial characters on the HyperTerminal screen. (Sample : “01234567890”) HyperTerminal even on the characters looks OK. Figure 6. Received Data by Network Terminal Program Figure 7. Serial to Wireless LAN configuration Copyright © LG Electronics. All Rights Reserved. 12 Aug. 01, 2012 [Wi-Fi Network Controller Module] Network HyperTerminal put words on the same word, the serial data are shown in the HyperTerminal. Serial Configuration 7.1 Serial Command Using Serial Command HWM-300 AP set. AP Setup mode, the operation mode, access mode. In addition, Scan, Wireless Controller, that can determine the behavior of the command iwconfig. Command console window on the screen when you type iwconfig-h command displays the contents. 7.2 Demonstration and Test The PC is set to the default IP 192.168.120.254, Host behavior when checking ping 192.168.120.254, because the command Host host to confirm the action. Client behavior when checking the console by typing ping www.google.co.kr and ping to verify. #!/bin/sh iwconfig eth1 essid off sleep 3 killall udhcpc killall udhcpd killall httpd killall wpa_supplicant iwconfig eth1 mode Master iwconfig eth1 channel 1 iwconfig eth1 essid 1234567890 # SSID 1234567890, SSID will be required to change. iwconfig eth1 commit ifconfig eth1 down ifconfig eth1 192.168.120.254 # Default IP Address, DO NOT change. ifconfig eth1 up sleep 2 httpd -h /root/web1/www udhcpd & iwconfig eth1 essid off sleep 3 killall udhcpd killall udhcpc killall wpa_supplicant killall getutctime killall ndm_daemon iwconfig eth1 mode Managed export NETIF=eth1 /root/RUN/image/wmiconfig --startscan --forceScanFlags 0 1 0 Copyright © LG Electronics. All Rights Reserved. 13 Aug. 01, 2012 [Wi-Fi Network Controller Module] iwconfig eth1 essid 1234567890 # Access SSID ifconfig eth1 down ifconfig eth1 up sleep 2 udhcpc -i eth1 & 8 RoHS Declaration To the best of our present knowledge, given our supplier declarations, this product does not contain substances that are banned by Directive ????/???/??? or contain a maximum concentration of 0.1% by weight in homogeneous materials for • Lead and lead compounds • Mercury and mercury compounds • Chromium (VI) • PBB (polybrominated biphenyl) • PBDE (polybrominated biphenyl ether) homogeneous materials for • Cadmium and cadmium compounds And a maximum concentration of 0.01% by weight in FCC Notice THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a oircuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. End product labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and user. The final end product must be labeled in an visible area with the following “Contain FCC ID: BEJWB3012”. The grantee’s FCC ID can be used only when all FCC compliance requirements are met. Copyright © LG Electronics. All Rights Reserved. 14 Aug. 01, 2012 [Wi-Fi Network Controller Module] IMPORTANT NOTE (1) Warning that this module is not approved to be operated simultaneously with other radios. Further certification requirement may required when installed and operated simultaneously with other radios. (2) Confirming of approved antenna, and advice that used other type of antenna or same type with higher gain will required additional certification. Copyright © LG Electronics. All Rights Reserved. 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 최선미 Create Date : 2012:08:22 15:30:02+09:00 Modify Date : 2012:08:24 09:59:45+09:00 Has XFA : No Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : 최선미 Title : EMISSION TEST REPORT Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2012:08:24 09:59:45+09:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:0abd3cbc-263a-4c3e-97c8-f7b7c0affc7c Instance ID : uuid:f3640773-84be-4830-930b-942e9296b681 Page Count : 16EXIF Metadata provided by EXIF.tools