LG Electronics USA WCDH100 Wireless Charger User Manual 01 LG W280A ATT UG EN 161125 indd

LG Electronics MobileComm USA, Inc. Wireless Charger 01 LG W280A ATT UG EN 161125 indd

User Manual_WCD-H100

Basic Functions
Charging Your Watch
Before using your watch for the first time, you should charge the battery.
Use the charging cord and cradle provided with your watch to charge its
battery.
The supplied charging cord will allow you to charge from a power outlet
or from a computer.
• When the battery power is low, the battery icon may show as empty. If
the battery charge is completely empty, the watch cannot be turned on
immediately after connecting the charger. Leave an empty battery to
charge for a few minutes before turning the device on. Some features
are not available while the battery is charging.
• To charge your device, always use the included power adapter, USB
cable, and charging cradle that come with your device. Using third-
party charging solutions can cause fire, electric shock, injury, or damage
to your device or other property.
• Your device has an internal rechargeable battery. For your safety, do not
remove the embedded battery.
1 Connect the USB cable to the USB/Charger port on the charging
cradle.
USB/Charger port
Basic Functions
2 Plug the charger adapter into a power outlet.
• To charge from a power outlet, connect the USB plug on the
charging cord to the charger adaptor, then plug the charger
adaptor into an outlet.
• To charge from a PC, insert the USB plug on the charging cord into
a USB port on the PC.
• A power source connected a PC may result in a slower charging speed
due to a lower electric current than a power outlet.
3 Place the your device on the charging cradle as shown below.
• The charging cord is designed to only be used with the watch and is
not compatible with other devices.
• To maximize battery life, make sure that the battery is fully charged
before you use the device for the first time.
• Exposure to liquids or other foreign materials while using your device
may affect the charging cradle, causing it to disconnect from the watch
while charging.
• If the charging screen does not display after connection to a power
source, adjust your device’s position on the charging cradle.
Basic Functions
4 While your watch is charging, the screen will show the time, battery
percentage and charging progress (indicated by the ring around the
outside).
Time
Charging progress
Battery percentage
5 Once the battery is fully charged, remove it from the charging cradle.
• The watch may become warm while charging. If the device becomes
hotter than usual, discontinue charging until it cools.
FCC NOTICE TO USERS
This device compli es with part 15 of the FCC Rules. Oper ation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any int erference received,
including interference that may cause undesired oper ation.
Changes or modifications are not expressly approved by the manufacturer
(or party responsible) for complia nce could void the user’s authority to
operate the equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure complia nce requirement s, no change
to the anten na or the device is permitted. Any c hange to the anten na or the
device could result in the device ex ceeding the RF exposure requirements
and void the use r’s authority to operate the d evice.
This equipment s hould be installed and operated with a minimum di stance
of 20 cm between the radiator and your body.
IC NOTICE TO USERS
T his device complies with Indu stry Canada licence-ex empt RSS standard(s).
Operation is subject to the fo llowing two conditions: (1) this device may not
cause interference, and (2) this device must accept any int erference,
including interference that ma y cause undesired oper ation of the device.
Le présent appa reil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempt s de licence. L'exploitation es t autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appa reil doit accepter tout brouillage radioélectrique subi,
même si le br ouillage est susceptible d'en c ompr omett re le fonctionnement.
IC Radiation Exposure Statement
This equipment compli es with IC RF Radiation expo sure limits set forth for an
uncontrolled environment. This device and its anten na must not be co-
located or operating in conjunction wit h any o ther anten na or transmitter.
This equipment should be installed and operated with a minimu m distance
of 20cm between the radiator and your body.
Cet équipement est conforme a ux limites éta blies par Industrie Ca nada en
matière d'exposition aux radiations dans un env ironnement non contrôlé.
Cet équipement ne doivent pas être colocalisés ou foncti onner en
conjonction av ec tout autre antenn e ou émetteur.
Cet équipement doit êtr e installé et utilisé avec une distance minima le de 20
cm entre le radiateur et votre corps.

Navigation menu