LG Electronics USA WIT-300H Wireless IP Telephone User Manual WIT300H UserManual 20050612
LG Electronics USA Wireless IP Telephone WIT300H UserManual 20050612
UserManual.wiki
>
LG Electronics USA
>
WIT-300H User Manual
>
Users Manual
Contents
1.
Users Manual
2.
Installation Manual
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 45.1.9 AP PROBING. .......................................................................................................................19 5.2 MENU DISPLAY AND MENU TREE.................................................................................................19 5.2.1 MAIN MENU DISPLAY..........................................................................................................19 5.2.2 MAIN MENU TREE...............................................................................................................21 5.3 KEY PHONE FEATURE...................................................................................................................21 5.3.1 MAKING OUTGOING CALL...................................................................................................21 5.3.2 TAKING AN INCOMING CALL...............................................................................................22 5.3.3 TRANSFERRING THE CALL...................................................................................................23 5.3.4 HOLDING THE CALL.............................................................................................................24 5.3.5 CALL FORWARD...................................................................................................................25 5.3.6 CALL WAITING....................................................................................................................26 5.3.7 CALL PARK..........................................................................................................................27 2.2.8 CALL PICK-UP......................................................................................................................28 5.3.9 MESSAGE WAIT / CALL BACK.............................................................................................29 5.3.10 DO NOT DISTURB (DND)...................................................................................................29 5.3.11 SYSTEM SPEED DIAL..........................................................................................................30 5.3.11 SYSTEM SPEED REDIAL......................................................................................................30 5.3.12 FLEX FUNCTIONS...............................................................................................................30 5.3.13 PTT GROUPS......................................................................................................................31 6. MENU FEATURES..................................................................................... 33 6.1 PHONE BOOK [MENU + 1]............................................................................................................33 6.1.1 ADD NEW [MENU+1+1].......................................................................................................33 6.1.2 SEARCH [MENU+1+2]..........................................................................................................34 6.1.3 CALLER GROUPS..................................................................................................................34 6.1.4 SPEED DIALS........................................................................................................................34 6.1.5 DELETE ALL [MENU + 1 + 5]...............................................................................................35 6.2 CALL HISTORY [MENU + 2]..........................................................................................................35 6.3 MESSAGES [MENU + 3] ................................................................................................................35 6.3.1 WRITE MESSAGE..................................................................................................................35 6.3.2 INBOX...................................................................................................................................36 6.3.3 OUTBOX...............................................................................................................................36 6.3.4 DRAFT..................................................................................................................................36 6.4 TOOLS [MENU + 4] .......................................................................................................................37 6.4.1 SCHEDULE............................................................................................................................37 6.4.2 MEMO..................................................................................................................................39 6.4.3 ALARM CLOCK.....................................................................................................................40 6.4.4 CALCULATOR.......................................................................................................................41 6.4.5 WORLD TIME.......................................................................................................................41 6.4.6 D-DAY..................................................................................................................................41 6.5 SETTINGS [MENU + 5] ..................................................................................................................42 6.5.1 SOUND..................................................................................................................................42 6.5.2 DISPLAY...............................................................................................................................43 6.5.3 SECURITY.............................................................................................................................44 6.5.4 NETWORK............................................................................................................................45 6.5.5 KTU SETTING......................................................................................................................46 6.5.6 KEY LOCK............................................................................................................................47 6.5.7 DIALING RULE.....................................................................................................................47 6.5.8 USER DICTIONARY...............................................................................................................47 6.6 PHONE INFORMATION [MENU + 6] ...............................................................................................47 6.6.2 S/W VERSION. .....................................................................................................................48 6.6.3 NETWORK INFORMATION.....................................................................................................48](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-4.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 134.1.3 Ringing / Call State Display The display is like as follows (A) Being called (B) Calling (C) Missing a call When a call is being tried, LCD display will be changed to (A). When you trying to a call, LCD display will be changed to (B). If you missed a call by your absent, the LCD display will be changed to (C) and If the caller’s name and number are already stored in your phone book, the corresponding name appears with the number at absent display. 4.2 Buttons and Functions 4.1.1 Buttons and Functions The WIT-300H has 10 digit buttons and 17 feature buttons. 1) Digit Buttons 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 2) Feature Buttons *, #, [SEND], [END], [UP], [DOWN],[LEFT],[RIGHT],[OK],[LSK],[RSK], [Hold/Save], [Clear/Prev], [Trans/PGM],[VOL UP], [VOL DOWN], [PTT] Note: [LSK] means Left Soft Key and [RSK] means Right Soft Key. The function of button is as followings; Button Icon Function Description [SEND] Idle mode [SEND] shows Recent Calls. Predial or after selecting call list or phonebook [SEND] makes a call. [END] During a call [END] release a call. In Menu mode [END] goes to idle mode. Navigation Keys In Menu mode](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-13.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 14 [LEFT], [RIGHT], [UP], [DOWN], [OK] Navigation keys navigate menu. [OK] select current menu or confirm the action. In Idle mode [LEFT] goes to KTU menu. [RIGHT] goes to FLEX menu [UP] goes to Schedule menu [DOWN] goes to message menu. [LSK] LSK means Left Soft Key In Idle mode [LSK] is used as menu key and goes to main menu mode.. In Menu mode or others [LSK] is used to option or special menu keys. [RSK] RSK means Right Soft Key In Idle mode [RSK] is used as search key and goes to search menu in phonebook. In Menu mode or others [RSK] is used to delete or special menu keys [TRANSFER]/ [PGM] Transfer a call to the other station It is used to Program keys [HOLD]/[SAVE] It is used to Hold and Save key [CLEAR]/[PREV] In Menu mode It goes to Previous menu mode In Edit mode It delete previous input character. * In idle mode Pressing longer than 1 second: goes to manner mode Pressing less than 1 second : display * Others mode Display * # In idle mode Pressing longer than 1 second: goes to phone lock mode Pressing less than 1 second : display # Others mode Display # [VOL UP], [VOL DOWN] In idle mode It is volume up and down of the key tone. In voice mode It is volume up and down of the voice. In ringing mode It is volume up and down of the ring.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-14.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 15 PTT In idle mode Press this button and hold, PTT works. Other parties of your PTT group can listen your speech.. If you release this button, PTT will be finished and you can listen. In voice mode This button doesn’t work. 0-9 Dial keys Standards dial buttons Memo) Manner mode are different with vibration mode. Manner mode affect all of rings and tones, but vibration mode affect only rings. 4.1.2 Ring and Message LED The ring and message LED located at upper right side is turned on when an incoming call / a new message is received. When the ring OFF function is enabled, ring tone is not heard but ring LED is flashing. The ring LED solid on for a Message waiting indication. 4.3 Entering Text You can enter alphanumeric characters using the keypad. For example, setting a name in the Phone Book, writing a message, scheduling events in the schedule all require entering text. Following text input methods are available in the handset. 4.3.1 Changing the Text Input Mode 1. When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the upper right corner of the display. 2. By pressing shortly, you can toggle and change the input mode among [Abc], [ABC], [T9abc], [T9Abc], [T9ABC], [123], [abc] 4.3.2 Using the T9 Mode The T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you press each key, the handset begins to display the characters that it thinks you are typing based on a built-in dictionary. As new letters are added, the word changes to reflect the most likely candidate from the dictionary. 1. When you are in the T9 predictive text input mode, start entering a word by pressing keys ‘2’ to ‘9’. Press one key per letter. The word changes as letters are typed – ignore what’s on the screen until the word is typed completely. If the word is still incorrect after typing completely, press the ‘*’ key once or more to cycle through the other word options. Example](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-15.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 16Press ‘4’, ‘6’. ‘6’. 3’ to type Good Press the ‘*’ key to get Home If the desired word is missing from the word choices list, add it by using the ABC mode. 2. Enter the whole word before editing or deleting any keystrokes. 3. Complete each word with a space by pressing the ‘0’ key. To delete letters, press the [Clear/Prev] key. Press and hold down the [Clear/Prev] key to erase entire words. 4.3.3 Using the ABC mode Use the ‘2’ to ‘9’ keys to enter your text. 1. Press the key labeled with the required letter. Once for the first letter. Twice for the second letter And son on 2. To insert a space, press the ‘0’ key once. To delete letters, press the [Clear/Prev] key. Press and hold down the [Clear/Prev] key to erase entire word 4.3.4 Using the 123 (Number) mode The 123 Mode enables you to enter numbers in a text messages (a telephone number , for example). Press the keys corresponding to the required digits before manually switching back to the appropriate text entry mode. 5. Telephone Features 5.0 Registration The WIT-300H is recognized as one of the LIP phones by IPECS system. Likewise, the WIT-300H system is to be registered for successful call processing by IPECS system. The registration is accomplished in two phases; wireless LAN connection establishment, MFIM registration. 5.0.1 Wireless LAN connection SSID SSID is used as an ID meaning by “I am a member of family” in 802.11b compliant wireless network. The WIT-300H should have the same SSID to one configured within an AP(Access Point). For setup SSID, please refer to subsection 6.5.4. About SSID in your office, you should contact network administrator.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-16.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 17 5.0.2 MFIM setup MFIM IP address WIT-300H should know the IP address of MFIM to initially request registration. For setup of MFIM IP address please refer to subsection 6.5.5. Network mask Since MFIM of IPECS resides in wired network, network mask should be specified as well. For setup of MFIM network mask, please refer to subsection 6.5.5. 5.0.3 Rebooting WIT-300H After the proper setup of both wireless LAN and MFIM IP address, just turn off the phone and turn it on. The WIT-300H will start registration and show its station number which is given by MFIM. 5.1 Basic Feature User can use various telephone features with a WIT-300H registered to MFIM module in a iPECS system. 5.1.1 Turing the Power On and Off Turning the Phone On When pressing [END] ( ) button, the power is turned on and the WIT-300H goes to an idle state. The following describes the sequence of power-on: 1. Install a charged battery pack 2. Press for a few seconds until the blue light in the right upper of the phone is on and off. 3. WIT-300H shows power-on animation 3. WIT-300H tries to do locking the access point while blinking Antenna Icon and RSSI level. 4. If Antenna Icon and RSSI level stop blinking, it means all procedures for initial setup are completed. 5. WIT-300H searches MFIM and sends a registration message to MFIM. 6. if the WIT-300H receives REGISTER RESPONSE, store station number and display station number : Refer to Idle state LCD display. Turning the Phone Off To turn off the WIT-300H, press [END] ( ) until the display turns off.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-17.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 18 5.1.2 Using Manner and Lock Mode quickly. Manner Mode (Quick) Use the Manner Mode in public places. 1. When in the idle mode, activate the Manner Mode quickly by pressing for 3 seconds. When the Manner Mode is set, the key tones are silent, and the phone is set to vibrate. NOTE: The phone remains in Manner Mode even if you turn it off and back on. NOTE: To cancel Manner Mode, press to switch into Silence All or Normal Mode. Lock Mode (Quick) Use the Lock Mode to prevent others from using your phone. 1. In Idle mode, to activate the lock mode quickly, press for 3 seconds. Lock mode setting is displayed. NOTE: To cancel the Lock Mode, Press [OK] , Unlock, then enter your 4 digit password. 5.1.3 Mute. The mute function prevents the other party from hearing your voice, but allows you to hear the other party. 1. Press Right Soft Key , Mute, during a call. 2. To cancel Mute, press Right Soft Key again. 5.1.4 Redialing Calls. Press to redial the last number in your call history. Latest 100 phone numbers are stored in the call history list and you can also select one of these to redial. 5.1.5 Adjusting the Volume. Use the side keys to adjust the earpiece, ringer, and key beep volumes. The upper key is used to increase the volume and the lower key is used to decrease the volume. You may adjust the earpiece volume during a call. The ringer volume can be adjusted through the menu. The key beep volume is adjusted through the menu. 5.1.6 Signal Strength.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-18.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 22Operation ① Enter phone number to connect a call ② Press Send key ( ) ③ Phone Icon ( ) is show on the LCD during trying to connect. ④ The connection tone is heard when connection is completed. Note : Even though an Ear-Mic is attached to a WIT-300H, a user can hear key tone sound through the Speaker not Ear-Mic. Condition 1. If user dials a wrong digit, a user can erase last 1 digit by pressing [Clear/Prev] button once and if you want to erase all digits, press [Clear/Prev] button for longer than 1 second. 2. Every time pressing each button, it is displayed of the LCD. 3. If pressing side button [ UP ( ) ], [ DOWN ( ) ] during conversation, the receiving voice level is controlled. 4. When conversation is over, press [End] ( ) button. Then the phone ( ) icon is will be disappeared and then the call will be cut off. 5. Call duration time(HH:MM) is displayed on the LCD. (HH = 00~23, MM=00~59). 5.3.2 Taking an Incoming Call Description When the phone rings or vibrates, press any key except end key. Operation Incoming Ring → Press [ Send ]() → Connection. Incoming CO ring is heard and a message come from iPECS is displayed on the LCD. Notes : If an Ear-Mic is attached to a WIT-300H, it can receive an incoming call by pressing button on the Ear-Mic while a ring sounds. (LGE Ear-Mic only)](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-22.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 23Notes : Even though an Ear-Mic is attached to a WIT-300H, a user can hear incoming call ring tone sound through the Speaker not Ear-Mic. Condition 1. When audible signals are heard, the call information will be displayed. 2. Caller Groups can be distinguished with difference ring type. 3. With audible signal, Ring LED will be flashed. 4. If pressing side button [ UP ( ) ], [ DOWN ( ) ] during conversation, the receiving voice level is controlled. 5. When conversation is over, press [End] ( ) button to release the call. Then the phone ( ) icon is will be disappeared and then the call will be released. 5.3.3 Transferring the Call Description This function is to transfer the current call to another user. Operation 1. Transfer a current call with dialing the number of CO or ICM. During a talking Press [ Trans/PGM ] ( ) or [LEFT] in navigation key + ‘0’ Dial the number to transfer (Inform the called station) Press [ End ] ( ) to release a call. 2. Transfer a current call using FLEX button. During a talking Press [ Trans/PGM ] ( ) or [LEFT] in navigation key + ‘0’ or [RIGHT] in navigation key Select Flex button (If flex button is CO button, Dial the number to transfer) -> (Inform the called station) Press [ End ] ( ) to release a call. NOTE : A user can make either a .screened or unscreened transfer. ( Screened Transfer When the called station answers, inform the transfer. Press [ End ] ( EMBED PBrush ) to complete the transfer.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-23.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 24( Unscreened Transfer When the called station begins to ring, Press [ End ] ( EMBED PBrush ) to complete the transfer after ring back tone is heard. Then, a message is displayed on the LCD of the called station. If the call is not answered within 30 seconds, recall ring is ringing at both stations. At this time, press Send button then a user will be connected with the transferred call again. Condition 1. The Primary Call must be answered before transfer can be initiated. 5.3.4 Holding the Call Description A user can hold the current call and connect another call or receive a call by another user with being hold the present call. Operation To hold a call On the call Press [ Hold/Save ] ( ) button or [KTU]+{HOLD} Figure x. Holding an ICM call Figure x. Holding an CO call 1. Press [Hold] to hold a present call. The hold music is heard to the held user. To retrieve the ICM call during a holding Press [KTU] (left key in navigation) + select {ICM} button + [ OK ]](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-24.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 25 To retrieve the CO call during a holding Press [FLEX] (right key in navigation) + select {FLEX} button + [ OK ] To hold a call and make a new call After holding a call, each pressed key will be sent to the system directly (not pre-dial) Condition 1. The Call must be answered before Hold can be initiated. 2. The WIT-300H will receive hold recalling after hold recall timer. At this time, WIP-Phone can answer the ring by pressing Send button. 3. Only 1 call at a time may be placed on hold 4. IPECS will provide hold music to the held user during holding 5. When there are several held lines , the user can select the held line with pressing number ( [1] or [2] or [3] ) or navigation UP/DOWN and [OK] . 5.3.5 Call Forward Description This feature provides a user the ability to forward calls under the certain condition. A user may forward a call to a certain station, station group, MFIM or an external party. The following call forward types are supported. - Unconditional, Busy, No-answer, Busy/No answer, Off-net, No answer Off-net Operation In Idle State + Press [KTU] + select {Forward} + [ OK ] + Enter Forward Type + Enter Station Number + Press [ End ] ( )](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-25.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 27 ① If a user dials a busy station, CALL WAIT alerts call waiting to a busy station. ② After receiving intercom busy tone, press * or the last digit of the called station number. ③ When a busy terminal engaged an ICM or CO call is called through camp-on by a new caller. ④ The called station will hear camp-on tone. Then the called party can answers to a new call by pressing [ Send ](). ⑤ Press [ Send ]() to connect to the other calling station. The former calling party is on hold. ⑥ MESSAGE come from IPECS is displayed on the LCD. ⑦ Press [ Send ]() to back to the former calling party . NOTE : Pressing End button to release the active call (CO call or intercom call) 5.3.7 Call Park Description A user can park using CO line to CO line parking location. Operation Call Park While connected to an outside call; Press [ Trans/PGM ] + Dial a parking location. + Press [ Send ]() ① The CO line being used is on hold and the WIP-Phone goes to an idle state. Retrieving a parked call Dial a parking location + Press [ Send ]()](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-27.png)
 Note : 1) A station should be in the same pick-up group with the ringing station. 2) This feature should be programmed at the Admin. station before using. (See the pick-up function programming method at the IPECS programming manual.) Directed Call Pick-up A station may answer (“Pick-up”) incoming and transferred Intercom, CO and IP calls ringing at another station. All ringing calls are subject to Directed Call Pick-up except Private Line and Queue Callbacks. 1. Dial the Directed Call Pick-up access code 7.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-28.png)
 Condition 5.3.9 Message Wait / Call Back Description User can activate a Message Wait Indication requesting a Call Back when calling a station that does not answer or is in DND. A station may receive a Message Wait from other stations in the system. The station receiving the Message Wait can return the call using [MSG/CALLBK] button or select Missed call in Recent Call and pressing [ Send ]( ) When a busy station is called, the user may request to be placed in a queue to receive a Call Back. When the called station returns to idle, the system signals the initiating station with Callback ring. When the user answers, the now idle station is called. Operation After receiving ringing back tone [KTU]+{MSG/CALLBK} [OK] WIT-300H goes Idle Condition 5.3.10 Do Not Disturb (DND) Description When a user doesn’t want to receive a call, this function can be used. Operation](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-29.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 30 To Activate Do Not Disturb(DND) Press [KTU] (left key in navigation) + select {DND} button + [ OK ] To Deactivate Do Not Disturb(DND) Press [KTU] (left key in navigation) + select {DND} button + [ OK ] 5.3.11 System Speed Dial Description This is the same function as implemented in iPECS with the title of “System Speed Dialing”. Please refer to manual of iPECS. 5.3.11 System Speed Redial Description This is the same function as implemented in iPECS with the title of “System Speed Redial”.Please refer to manual of iPECS. 5.3.12 Flex Functions Description : Unlikely with LIP phone, the WIT-300H does not have physical FLEX buttons, therefore, we implement FLEX button by S/W emulation. Through this interface, you can handle FLEX buttons as the same as a use does with LIP phones.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-30.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 31 Operation : How to display Press [FLEX] button (right key in navigation) This is an appearance of S/W driven FLEX key. Just pressing down “FLEX” button in any position of the menu tree will guide a user into this display. A user can select/program each of FLEX buttons. How to program The following figure shows an example of FLEX button in the case that a user try to associate extension 101 to FLEX button 1. Condition FLEX bin should be remained empty before the programming. 5.3.13 PTT Groups Description Each WIT-300H station is assigned to receive PTT announcements from each PTT group. A station can be assigned to any, all or no groups. This function is make WIT-300H join in a PTT group defined in iPECS. Operation PTT invoker](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-31.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 336. Menu Features WIT-300H offers a set of functions that allow you to use and customize the phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked left soft key () and right soft key ( ) Each menu and sub-menu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the applications and services; the label on the bottom line of the display just above each key indicates its current role. 6.1 Phone Book [Menu + 1] This menu allows you to save and manage contact address information. The Phone Book functions provides functions to add a new address or search saved contact addresses by name, phone number and group. 6.1.1 Add New [Menu+1+1] This menu allows you to add a new contact address. You can input contact address information including name, phone numbers, email address, group information items, personal bell, and memo](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-33.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 34 6.1.2 Search [Menu+1+2] This menu allows you to search your contact addresses. Generally the search operation is performed by name. In the search window, the current search function and results for the search condition are displayed. You can change the configuration in the [Menu] menu so that you send a message, change search option, edit, and delete to the selected phone number. You can also make a phone call to the selected phone number by pressing [send] ( ). 6.1.3 Caller Groups This menu allows you to manage group information. By default, there are 4 groups: family, friends, business and school. You can edit and delete a group except 4 default groups. You can also configure ring tone for a group so that the group ring tone sounds when a call from a specific contact address within that group arrives and there is no ring tone configured for the contact address. 6.1.4 Speed Dials Description Speed dialing allows user to make an outgoing call at a specific number through pressing down by either one or two button(s). Both the number and an associated button are to be registered in the “Speed Dials” submenu in “Phonebook” menu. Since it is originally intended with one or two buttons maximally, user can associate 99 phone numbers with speed buttons; from 1 ~ 99. Operation Associating a phone number with Speed Dial button. Select [PhoneBook] + Select [Speed Dials] + Select a number to be speedy dialed + [OK] Making a call Suppose that you associated phone number “123” with speed dial “1”, Enter a speed dial number from 1 to 99 and Press [Send].](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-34.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 35 Condition Only the number in the Phone Book can be registered in the list of speed dial. 6.1.5 Delete All [Menu + 1 + 5] This menu deletes all saved phonebook address information. 6.2 Call History [Menu + 2] You can access the recent call register by pressing the [send] ( ). Different icons show you the type of the recent calls registered in the list (see following page for icon description) You can view missed, received, dialed and entire call records. Each call record menu provides the following functions. You can make a call to the number in the call record. You can save the number in the call record to the Phone Book. You can send a message to the number in the call record. You can view detailed information about the call records such as the date, time and call duration You can clear call records. : Dialled Call : Missed Call : Received Call 6.3 Messages [Menu + 3] A user can send/receive short text message to/from others. 6.3.1 Write Message You can write and edit a single text message up to 100 characters and send a message to maximum 20 different numbers.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-35.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 36A user can send a text message through this menu. Condition 1. You can not assure message sending. 2. If a message is sent all wrong destination, LCD displays ‘Access Denied’ 3. You can save the message to draft box. 4. If you receive a incoming ring during writing a message, you will lost a message. 6.3.2 Inbox A user can browse the messages stored in his mail box. Any messages arrived in the WIT-300H is stored in this mailbox. Condition 1. Message loading needs some times because messages in inbox is come from MFIM system every time. 2. You can get maximum 10 messages. If you does not delete messages, you can not receive more messages. 6.3.3 Outbox You can view sent messages. Select a message and then press the [OK] key to view the message. Messages are stored in this mailbox even if you does not success message sending. You can hold maximum 30 messages in this mailbox. 6.3.4 Draft You can view saved messages. Select a message and then press the [OK] key to view the message. You](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-36.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 37can hold maximum 10 messages in this mailbox. Condition 1. You can view saved messages in case you save to draft during writing a message. 6.4 Tools [Menu + 4] 6.4.1 Schedule Press the Schedule shortcut key ([UP] key in the navigation button) to display Schedule menu. Scheduler keeps your agenda convenient and easy to access. Simply store your appointments and your phone alerts you with a reminder of your appointment. You can also take advantage of the Alarm Clock feature. You can make 50 schedules. Monthly Schedule Management 1. Select the Tools form the top menu. 2. Select Schedule and press the key. 3. The monthly view is displayed. 4. Initially, the cursor appears on today’s date according to your WIT-300H settings. 5. You can move the date cursor to the desired location using the up, down, left and right navigation keys. 6. On a date where a schedule item, anniversary or birthday is saved, corresponding icons and the number of saved schedule items are displayed on the bottom left of the screen Adding a New Schedule Item 1. Select the left soft key [Menu] in the Monthly schedule management screen, select the Add from the popup menu and then press the key. Alternatively, select the right soft key [Add] in the Monthly schedule management screen. 2. Input the desired date using the numeric keys. 3. Input the desired time using the numeric keys. 4. Input the subject 5. Select the schedule item type using the left and right navigation keys. 6. Select the repeat type using the left and right navigation keys. 7. Select the alarm type using the left and right navigation keys.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-37.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 388. Press the key to save the new schedule item. Condition 1. We support time format yyyy/mm/dd only. Deleting a Schedule Item 1. Select the left soft key [Menu] in the Monthly schedule management screen, select Delete, and then press the key. 2. Popup menus including Delete past, Multiple delete and Delete all will be display 3. Select Delete past and press the key to delete all schedule items prior to today. 4. Select Multiple delete and press the key. A screen asking you to specify the term to delete schedule items for will then appear. In this screen, input the desired term and press the key to delete the schedule items within the specified period. 5. Select Delete all, and press the key to delete all of the schedule items. Condition 2. Delete past does not delete schedules prior to current time today. Set holiday 1. Select the left soft key [Menu] in the Monthly schedule management screen, select Holiday and then press the key to display the Holiday configuration popup window. 2. Supported holiday types include On the day, Weekly, Monthly, Annually and Multiple setting. 3. Select the holiday configuration type and press the key to configure the holiday. 4. The date corresponding to the configured holiday is represented in green in the Monthly schedule management screen.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-38.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 39Condition 3. Weekly set holiday during 52 week. 4. Monthly set holiday during 12 month. 5. Yearly set holiday during 5 years Searching for a Schedule Item Select the left soft key [Menu] in the Monthly schedule management screen, select Search and then press the key to display the Search schedule items screen. 1. Input the desired subject of the schedule item to find 2. Select the schedule type to find. 3. Press the key 4. If there are schedule items that meet the search criteria, the schedule items are displayed. If there is no schedule item satisfying the search criteria, No match schedule Item message appears. Moving to a Specific Date 1. Select the left soft key [Menu] in the Monthly schedule management screen, select Go to date and then press the key to display Go to date window. 2. Input the desired date to move to and press the key. 3. The date cursor of the Monthly schedule management screen will then move to the specified date. Go to Today 1. Select the left soft key [Menu] in the Monthly schedule management screen, select the Today and then press the key. 2. The date cursor of the Monthly schedule management screen will then move to today’s date. 6.4.2 Memo This menu allows you to write down small amount of manuscript of what you have to remember. You can make 30 memos.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-39.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 40 Saved Memo’s 1. Select the Tools from the top menu. 2. Select the Memo item and press the key 3. The saved memo list is displayed. Memo Add 1. To add a new memo, select Add using the left soft key [Menu] in the Memo screen or select the right soft key [Add]. 2. Input the contents of the memo to be saved. 3. Press the key to save the memo. Memo Delete / Delete All 1. Select the desired item to delete from the Memo list and select Delete using the left soft key [Menu] to delete the memo. 2. Select Delete all using the left soft key [Memo] to delete all the saved memos. 6.4.3 Alarm Clock The alarm function allows you to set up multiple separate alarms. You can also set the time, repetition interval and alarm sound. You can make 3 alarm clocks. Select your desired alarm to configure in the alarm list. If there is no alarm, press the right soft key [New] to add a new alarm. Input alarm time: Input your desired alarm time by specifying hour and minute. If the time format is 12 hours-based format, you have to select either ‘am’ or ‘pm’ using the right soft key. Select repeat mode: Select desired repeat mode using the navigation key. Select bell: Select the bell to use for the alarm using the navigation key. Input memo: Input alarm name.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-40.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 41 Set/Cancel alarm: On or Off the alarm using the navigation key. When you have completed configuration, press the key to save the changed alarm configuration. Note: 1. The alarm function does not work if the handset is turned off. 2. During voice call, the alarm works in vibration mode. 6.4.4 Calculator The calculator function allows you to add, subtract, multiple and divide. You can input numbers using the number keys, and operators using the up, down, left, and right navigation key. You can input a decimal point by pressing the left soft key. Whenever you press the [Clear/Prev], characters are sequentially deleted in reverse direction. 6.4.5 World Time The World Time function provides time information on major cities worldwide. 1. You can view the time of desired country or city using the navigation 2. You can select a desired city as home using the {Home} key. Note: 1. In the list, you can not go to a wanted list by pressing dial button in case of more than 9. 6.4.6 D-day](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-41.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 42 D-day finder The D-day finer show the number of remaining days until the specified day of event. D-day Counter You can make 20 D-day counters. 1. Select the D-day Counter menu. 2. Select the desired item in the list to view Title, target date on days remaining. 3. Press the key to view the list. 4. Press the right soft key [Add] to input title and new date. Then press the key to add the item in the list. 6.5 Settings [Menu + 5] 6.5.1 Sound You can configure voice/vibration ringtone, key tone, sound effect, and volume. Sound menu have the submenus as shown below. Alert by This menu determines the incoming call notification mode. You can select from Crescendo, Ring, Vibration, Ring after vibration, Ring & Vibration, Mute, and Vibrate once. Ring Tone This menu determines the ring tone for incoming call notification. WIT-300H supports 50 different ring tones. Ring Tone Volume This menu determines the ring tone volume for incoming call notification.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-42.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 45 Lock Phone User can lock the phone. If a user locks the phone, WIT-300H ask the user to enter password on trying to use it. A user can also change the password for the lock mode here. Reset Default It changes sound setting and display settings. Note: 1. The password is not changed. [Password Management ] For new password setting, a user should enter two items; a new password and an asking to be questioned when he will change the password. When he forgot both of them, he should contact the seller. 6.5.4 Network This menu provides information on using the network configuration. This menu has 5 sub-menus; DHCP, Static IP, 802.11b Configuration, Authentifications, and Load Default. Setting Up DHCP (Dynamic Host Configuration Protocol) Client The DHCP client provides a mechanism for allocating IP addresses dynamically so that addresses can be reused when hosts no longer need them. This menu determines DHCP on or off. When DHCP is set to off, you must set static IP address in the following menu. (When used as Local mode In IPECS system, this setting does not effect) Setting Static IP Address You can configure a static IP address, Subnet, Primary Gateway, Primary DNS, Secondary DNS,](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-45.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 46 Setting 802.11b Configuration. You can configure 802.11b configuration such as SSID, Data rate, Encryption (WEP 64/128 bits) AP Probing WIT-300H searches all the reacheable APs. To detect the APs, just select “Auto” in SSID item in “Setting 802.11b Configuration” menu. WIT-300H shows the list of SSIDs configured in the APs. User can select one of them with his preference. After selecting an AP, please reboot WIT-300H. Note: 1. AP probing list can be shown maximum 5 APs 2. If you can not find a AP that you want to set, you press [Clear/Prev] and try it again until you find the AP. 6.5.5 KTU Setting Remote Mode / Same Router. These menus are all related to the MFIM configuration. For normal interaction with MFIM in iPECS system, WIT-300H should be configured like one of the LIP phones. About detail descriptions about Direct Send/Remote Mode/Same Router, please refer to the configuration manual of LIP phones. Direct Send WIT-300H can automatically discover MFIM if this value is entered as FALSE. Even if a user do not know MFIM IP address, the user can register to the MFIM by setting this value as FALSE. And even if there are more than one MFIM in same IP subnet, a user can selectively register to a MFIM by setting this value as TRUE.](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-46.png)
![WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 47 MFIM IP. IP address of MFIM. MFIM Netmask. Network mask value of MFIM. 6.5.6 key Lock When you enable key lock, keypad will be lock automatically on an idle screen after the key lock time. Without any key requesting. You can set the key lock time as diable, 10sec, 30sec or 1minute. If you want to unlock your phone keypad, press [OK] twice. But, if you enabled key lock before, your phone keypad will be unlock and then after key lock time the keypad will be lock up again automatically. 6.5.7 Dialing Rule You can set CO Access code previously. This CO access code in Dialing rule will be attached to dialing in Recent call, Phonebook, and Call History except dialing in idle state. We check the number in recent call, Phonebook, Call History and if the length of dialing number is more than 4 except CO access code, CO access code will be added to the dialing number. Note: 1. To distinguish between 4 digit CO and 4 digit ICM, we leave the dial number added CO access code in recent call. 6.5.8 User Dictionary You can add a word to the T9 dictionary. This word can be found in T9 editing by pressing ‘*’ key Note: 1. This editing mode support Abc, ABC, abc. 6.6 Phone Information [Menu + 6]](https://usermanual.wiki/LG-Electronics-USA/WIT-300H.Users-Manual/User-Guide-571652-Page-47.png)
