LG 32LG70 User Manual LCD TELEVISION Manuals And Guides L0912228

LG LCD Television Manual L0912228 LG LCD Television Owner's Manual, LG LCD Television installation guides

User Manual: LG 32LG70 32LG70 LG LCD TELEVISION - Manuals and Guides View the owners manual for your LG LCD TELEVISION #32LG70. Home:Electronics Parts:LG Parts:LG LCD TELEVISION Manual

Open the PDF directly: View PDF .
Page Count: 152

Download
Open PDF In Browser	View PDF

-0

LCD TV
PLASMA TV
OWNER'S MANUAL
LCD TV MODELS

PLASMA TV MODELS

32LG30
37LG30
42LG30
42LGX
47 LGX
32LG60
37LG60
42LG60
47LG60
S2LG60

37LGS0
42LGS0
47LGS0
S2LGS0

42PG25
50PG25

47LG90

32LG20

Please

50PG60
60PG60

32LG70
42LG70
47LG70
S2LG70

SOPG70
60PG70

rea

before

operating

reference.
:tel number
the label attached
this

information

and serial number

of the set.

on the back cover and quote

to your dealer

when you require

service.

(Only for Plasma TV)
This product qualifies for ENERGY STAR in the "factory
default (Home mode)" setting and this is the setting in which
power savings will be achieved.
Changing the factory default picture setting or enabling other
features will increase power consumption that could exceed
the limits necessary to quality for Energy Star rating.

P/NO : SAC30708020

(0812-REVll)

WARNING / CAUTION
WARNING / CAUTION
To prevent

WARNING
/ CAUTION

fire or shock

this product

hazards,

not expose

to rain or moisture.

TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLEPARTS INSIDE. REFERTO

Class B digital

QUALIFIED SERVICEPERSONNEL.

This equipment

device
has been tested and found to comply

with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection
against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions,

may cause harmful

interference

to radio

communications.
However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment

does cause harmful

interference

radio or television reception, which can be determined
by turning

the equipment

encouraged

to try to correct

or more of the following

off and on, the user is
the interference

by one

measures:

- Reorient or relocate the receiving antenna.
- Increase the separation
receiver.

between the equipment

and

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
-Consult

the

technician

TO REDUCE THE RISK OF FIRE AND ELECTRIC

by the party

responsible

the user's authority

Do not attempt
without written

Electric Code (U.S.A.). The code provides guidelines

for

Unauthorized

proper

the

authority

grounding

of the building,
as practical.

and, in particular,

shall be connected

specifies

to the grounding

as close to the point

that

radio/TV

for help.

This reminder
is provided
to call the CATV system
installer's attention
to Article 820-40
of the National

cable ground

or an experienced

Any changes or modifications not expressly approved

RAIN OR MOISTURE,

dealer

system

of the cable entry

for compliance

could void

to operate the equipment.

to modify this product in any way
authorization
from LG Electronics.
modification

could

to operate this product

void

the

user's

SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Protect the power cord from being walked on

Keep these instructions.

or pinched

Heed all warnings.

receptacles, and the point where they exit from
the apparatus.

particularly

at plugs, convenience

Follow all instructions.

Do not use this apparatus near water.

Only use attachments/accessories
the manufacturer.

specified

Clean only with dry cloth.

Use only with the cart, stand, tripod,
or table specified

by the manufacturer,

with the apparatus.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.

caution

bracket,
or sold

When a cart is used, use

when moving the cart/apparatus

com-

bination to avoid injury from tip-over.

S3125A

Do not install near any heat sources such as
radiators,

heat

registers,

apparatus
heat.

(including

stoves,

amplifiers)that

Unplug this apparatus during lighting storms
or when unused for long periods of time.

other

produce

@
Do not defeat the safety purpose of the polarized
or grounding-type
plug. A polarized plug has
two blades with one wider than the other. A
grounding

type

third grounding

plug

has two

third prong are provided
provided

blades

and a

prong, The wide blade or the
for your safety. If the

plug does not fit into your

consult an electrician
obsolete outlet.

for replacement

outlet,
of the

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.

SAFETY INSTRUCTIONS
Never touch this apparatus or antenna
a thunder or lighting storm.

during

WARNING - To reduce the risk of fire or electrical
shock, do

not

expose

this

product

to rain,

moisture or other liquids. Do not touch the TV

When mounting

with

a TV on the wall, make sure

wet hands. Do not install

not to install the TV by the hanging power and

near flammable

signal cables on the back of the TV.

candles

objects

expose

this

product

such as gasoline

the

TV to

direct

air

conditioning.

Do not allow an impact shock or any objects to
fall into the product,

and do not drop onto the

screen with something.

CAUTION

concerning

It is recommend
upon

the Power Cord:

that

a dedicated

appliances

circuit;

that

Do not expose to dripping or splashing and do
not place objects filled with liquids, such as

be placed
is, a single

vases, cups, etc. on or over the apparatus

outlet circuit which powers only that appliance
and has no additional
outlets
or branch
circuits. Check the specification
owner's manual to be certain.
Do not connect

Do not overload

page of this

too many appliances

same AC power outlet
fire or electric shock.

to the

as this could result

wall outlets.

Overloaded

wall

outlets, loose or damaged wall outlets, extension
cords,

frayed

power

cords,

or damaged

connected

examine the cord of your

the appliance,

unplug it, discontinue

use of

and have the cord replaced with

or mechanical

pipes.

upon.

closed

Pay particular

outlets,

grounded

AC out-

are not possible,
install a separate

Do not try to ground the unit by connecting
to

kinked, pinched,

to a three-prong

wire

shock (i.e. a TV
AC plug must be

let). If grounding
methods
have a qualified electrician
circuit breaker.

an exact replacement part by an authorized
servicer. Protect the power cord from physical
abuse, such as being

the earth ground

to prevent possible electric
with a three-prong grounded

appliance, and if its appearance indicates damage
or deterioration,

GROUNDING
Ensure that you connect

cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically

(e.g.

on shelves above the unit).

twisted,

telephone

wires,

lightening

rods,

or gas

in a door, or walked

attention

to plugs, wall

Power
Supply

and the point where the cord exits the

appliance.
Do not

make the

plugged

in. Do not use a damaged

power cord.

TV with

the

power

cord

or loose

Be sure do grasp the plug when

unplugging the power cord. Do not pull on the
power cord to unplug the TV.

DISCONNECTING

FROM

Mains plug is the disconnecting

MAINS

device.

plug must remain readily operable.

Keep the product

DEVICE

away from direct sunlight.

The

ANTENNAS
Outdoor

antenna

If an outdoor
precautions
should
head

grounding

antenna

is installed,

below. An outdoor

not be located
power

in the vicinity

a bookcase.

light

lines or circuits

provide

system is grounded

some protection

surges and built-up
Section

against

voltage

static charges.

810 of the National

supporting

with

If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the power
cord contact an authorized service center.

so as

Electrical

Code

(NEC) in the U.S.A. provides information
respect to proper

Do not cover the product

as death or

serious injury can occur.
Be sure the antenna

ventila-

space such as

places.

power circuits, or where it can come in contact
with such power

TV where there is proper

cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty

of over-

electric

Install your

tion. Do not install in a confined

the

antenna system

lines or other

Ventilation

grounding

structure,

with

of the mast and

grounding

Do not

press strongly

hand or sharp object

upon

the

panel with

such as nail, pencil

pen, or make a scratch on it.

of the lead-in

wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge

unit,

connection

trodes and requirements
electrode.
Antenna

grounding

National

Electrical

Ground

grounding

for

the grounding

according
Code,

elec-

the

ANSl/NFPA

Clamp
Antenna

Lead

If the TV feels cold to the touch, there may be
a small "flicker" when it is turned on. This is
normal, there is nothing

wrong with TV.

Some minute dot defects

may be visible on the

in Wire

Antenna
Discharge Unit
(NEC Section 810-20)

screen, appearing

as tiny

red, green,

or blue

spots. However, they have no adverse effect on

Grounding
Conductor
(NEC Section 810-21)

the monitor's

Ground

Avoid touching the LCD screen or holding your

Clamps

Power Service Grounding
Electrode
System (NEC
Art 250, Part H)

NEC: National Electrical Code

For LCD TV

performance.

finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.

Cleaning
When

cleaning,

scrub

gently

scratching.

unplug
with

the power

a soft

cloth

cord
to

and

prevent

Do not spray water or other liquids

directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners

or benzene.

Moving
Make
sure
unplugged

the

product

turned

off,

and all cables have been removed. It

may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.

CONTENTS
WARNING / CAUTION
SAFETY INSTRUCTIONS

............................ A
..........................

Channel Setup
- Auto Scan (Auto Tuning) ...........................

- Add / Delete Channel (Manual Tuning) ...... 57

FEATURE OF THIS TV ............................... 6

Accessories ......................................................

Front Panel Information

.....................................

Back Panel Information

....................................

Stand Instruction

.............................................

VESA Wall Mounting
Cable Management
Desktop

- Channel Editing ........................................

Input List ........................................................

Input Label .....................................................
AV Mode ........................................................

60
61

SIMPLINK .......................................................

10
13

........................................

Entry Modes ...................................................

..........................................

Photo List .......................................................

Music List .......................................................

Picture Size (Aspect Ratio) Control

Pedestal Installation

...........................

Swivel Stand ...................................................

Attaching

the TV to a Desk ..............................

Securing the TV to the wall to prevent falling when
the TV is used on a stand ................................
21
Antenna or Cable Connection

..........................

..................

Preset Picture Settings
- Picture Mode - Preset ...............................

- Color Tone - Preset ...................................

Manual Picture Adjustment

HD Receiver Setup .........................................

DVD Setup .....................................................

VCR Setup .....................................................

Other A/V Source Setup .................................

Picture Improvement

PC Setup ........................................................
USB Connection ............................................

37
46

Advanced Control-

Audio Out Connection ...................................

Advanced Control

- Picture Mode - User Mode ........................

- Picture Mode - Expert Control

..................

.....................

Advanced Control-

Functions ...............................

TruMotion

Channel Selection

...........................................

Power Indicator

.........................................

Image Sticking Minimization

..................................................

Menus Selection

............................

Initial Setting

Demo ......................................

Turning On the TV ..........................................

........................

Picture Reset

Quick Menu / Favorite Channel Setup ..............

Mode ..... 81

................................................

Local Dimming

On-Screen

Eye Care ...........................

Volume Adjustment

Level ....... 79

Demo ............................................

Local Dimming
Remote Control

Black (Darkness)

- Real Cinema/Film

Advanced ControlTruMotion

Technology

.................................................

..............................................

(ISM) Method

Power Saving Picture Mode ..............................

...... 86
87

Preset Sound Settings (Sound Mode) .............. 89

Troubleshooting .............................................
Maintenance .................................................

118
120

Sound Setting Adjustment - User Mode ........... 90

Product Specifications ...................................

121

Clear Voice .....................................................

Balance ..........................................................

Programming the Remote Control .................. 124
IR Codes .....................................................
127

TV Speakers On/Off Setup ..............................

Audio Reset ...................................................

Stereo/SAP Broadcast Setup ...........................

Audio Language ..............................................

Auto Volume Leveler (Auto Volume) ................. 88

External Control Through RS-232C ................. 129
Open Source License ......................................

136

On-Screen Menus Language Selection .............. 97
Caption Mode
- Analog Broadcasting System Captions ....... 98
- Digital Broadcasting System Captions ........ 99
- Caption Option

.....................................

100

Clock Setting
- Auto Clock Setup ...................................

101

- Manual Clock Setup ...............................

102

Auto On/Off Time Setting ............................

103

Sleep Timer Setting .......................................

104

Auto Shut-off Setting .....................................

105

Set Password & Lock System .......................... 106
Channel Blocking ..........................................

109

Movie & TV Rating ........................................

110

Downloadable Rating .....................................

115

External Input Blocking ...................................

116

Key lock .........................................................

117

FEATURE OF THIS TV
_ This feature

is not available for all models.

SRS(O)

is a trademark of SRSLabs, Inc.

DIGITAL

TruSurround XT technology is incorporated under
license from SRSLabs, Inc.

IHX

Manufactured

DOLBY
I

"Dolby

under license from Dolby Laboratories.

"and the double-D

symbol are trademarks of

Dolby Laboratories.

THX (Thomlinson Holman's Experiment) is the audio
and video certification standard of THX established

CALIBRATE LIKE A PRO: Sophisticated and detailed
calibrations can be made through the ISFccc mode.

by George Lucas, who directed
and Thomlinson.

Detailed calibration

the movie Star Wars,

requires a licensed technician.

Please contact your local dealer to inquire about an
ISF certified technician.

This is the product to be certified in THX display area
and guarantees screen quality that exceeds the display
standard specification

Use

of ferrite

(This feature

in both hardware and software.

core
is not available for all models.)

Ferrite core can be used to reduce the electromagnetic
when connecting

The closer the location
the better it is.

wave

the power cord.
of the ferrite core to the power plug,
Install the power plug closely.

PREPARATION
ACCESSORIES
Ensure that the following

accessories

dealer where you purchased
The accessories

included

are included

with your TV. If an accessory

is missing, please contact

the

the TV.

may differ

from

the images below.
_D
rT1
_D

Manual

CD Manual

Power Cord

Remote Control,
Batteries

* Wipe spots on the exterior only with
the polishing cloth.

When using the VGA (D-sub

* Do not wipe roughly when removing

Polishing
(This feature

Cloth

is not available

use shielded

15 pin

the

scratch or discoloration.

cables with ferrite cores to maintain
standards

D-sub

signal

user

must

interface

compliance.

15 pin Cable

(Only 50PG25,
50/60PG60,
50/60PG70)

42PG25)

x4
Bolts for stand
assembly
(Refer to R13)

PC connection,

stain, Excessive pressure may cause

for all models+)

(Only

cable)

Cable Holder
Cable

Management

Clip

Protection
Cover

Ferrite core
(Refer to P.6)
(This feature

is not available

for all models.)

PREPARATION
FRONTPANELINFORMATION
,,,IImage shown may differ from your TV.
""_NOTE: If your TV has a protection tape attached, remove the tape.
And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it).
-O

_o
m

Plasma

TV Models

Remote Control

Sensor

POWER Button

Power/Standby
Illuminates
Illuminates

INPUT
Button

MENU
Button

ENTER
Button

Indicator

red in standby mode.
blue when the TV is switched

VOLUME

CHANNEL

(-, +) Buttons

(V,A)Buttons

on.

LCD TV Models
32/42/47/S2LGTO,

47LG90

Intelligent

Sensor

Adjusts picture
conditions

according

Power/Standby

Indicator

red in standby mode.

Illuminates

blue when the set is switched

the OPTION

VOLUME (+,-)
Buttons

ENTER Button

Indicator

MENU Button

on.
in

menu. _ p.85)

Remote Control
POWER Button

CHANNEL ( ^, v)
Buttons

surrounding

Illuminates

(Can be adjusted using Power

the

Sensor

--INPUT

Button

LCDTVModels
32LG20, 32/37/42LG30,

37/42/47/52LG50
_o
m

CHANNEL ( ^, v)
Buttons

Intelligent Sensor (Except 32LG20, 32/37/42LG30)
Adjusts picture
conditions

according

Power/Standby

Indicator

the

surrounding

llluminates

red in standby

llluminates

blue when the set is switched on.

VOLUME (+,-)
Buttons

mode.

(Can be adjusted using Power
the OPTION

Indicator

Button
in

Button

menu. _ p.85)
Button

Remote Control

Sensor

POWER Button

32/37/42/47/52LG60,

42/47LGX

Intelligent

Sensor

_---VOLUME

Adjusts picture according
surrounding conditions.

(+,-)

to the

Buttons

POWER Button
Remote Control
Power/Standby

-Indicator

--MENU

llluminates

red in standby

llluminates

white when the set is switched on.

(Can be adjusted
the OPTION

ENTER Button

Sensor

Button

mode.

using Power

Indicator

INPUT Button

menu. _ p.85)

PREPARATION
BACK PANELINFORMATION
,,,IImage shown may differ from your TV.
Plasma

TV Models

_o
i

O
z

@ HDMI/DVI

IN, HDMI IN

Digital Connection.
Supports
HD video
support 480i.

and

Digital

audio.

Analog

or HDMI

AUDIO
I/8"

(RGB/DVI)

headphone

jack for analog PC audio input.

For a wired remote control.
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.

@ ANTENNA/CABLE

Connect

over-the air signals to this jack.

Connect

cable signals to this jack.

and/or

coaxial connection.

OUT
audio output
systems.

(Audio/Video)

for use with amps and home

Analog composite connection.
definition video only (480i).
S-VIDEO

Uses a D-sub 15 pin cable

@ REMOTE CONTROL IN PORT

@ AV

RGB (PC)
Analog PC Connection.
(VGA cable).

@ AUDIO
Analog
theater

HD.

for use with amps and home

Note: In standby mode, these ports do not work.

Uses a red, green, and blue cable for video & red
and white for audio.

Digital audio output
theater systems.

Doesn't

Connection.

Supports

OUT

Includes an optical

Accepts DVI video using an adapter
DVI cable (not included).
COMPONENT

DIGITAL AUDIO

Supports

standard

Better
quality
than
standard
composition.
Supports standard definition video only (480i).

@ USB INPUT
Used for viewing photos and listening to MP3s.

@ USB SERVICE ONLY or RS-232C IN (SERVICE
ONLY)
Used for software updates.

Power Cord Socket
For operation
Caution:
power.

with AC power.

Never attempt

to operate the TV on DC

LCD TV Models

_o
l,,'rl

32LG20,32/37/42LG30

37/42/47/52LGSO,

32LGTO

_iiiiiiiiiiiiiiiiii_!i!i_!ii!i

PREPARATION

""_Image shown may differ from your TV.
LCD TV Models

I'11

42/47/52LG70,

47LG90

ilililiiii:i,_!!ii!ii!ii!ii!iiiii!!i!iiiiii!ii!ii!iil
!i!ii!!_i

j_j,_,_:;:;_!_,!_i;_
_, ,_,_% _

32/37/42/47/52LG60,

42/47LGX

iiiiii!i_ii!i_ii

STAND INSTRUCTION
,,,IImage shown may differ from your TV.
Plasma

TV models
-0

DETACHMENT

INSTALLATION (Oniy 42PG25)
Carefully
cushioned

place the TV screen side down
surface to protect the screen

on a
from

damage.

Loose the bolts from TV.

Assemble the TV as shown.

42PG25

Carefully place the TV screen side down on a
cushioned surface to protect the screen from

damage.

Fix the 4 bolts securely
back of the TV.

using the holes in the

50PG25/60/70

60PG60/70

Detach the stand from TV.

PROTECTION COVER
After

removing

protection

the

cover

stand,

install

the

included

over the hole for the stand.

Press the PROTECTION

COVER

into the TV

until you hear it click.

PREPARATION
32/37/42/47/52LG60,42/47LGX
""_Image shown may differ from your TV.

INSTALLATION (Only 32/37/42LG60,42LGX)
_o
I'I"1

O
z

Carefully
cushioned

place the TV screen side down on a
surface to protect

the screen from

damage.

Assemble the parts of the STAND
with COVER BASE of the TV.
32LG60

BODY

37LG60

42LC60, 42LCX

STAND
STAND

BODY

COVER BASE

(_)

STAND

COVER BASE

Assemble the TV as shown.

Fix the 4 bolts securely
back of the TV.

BODY

using the holes in the

:OVER

BODY

BASE

DETACHMENT

Carefully
cushioned

PROTECTION COVER

place the TV screen side down on a
surface to protect

the screen from

After removing the stand, install the included
tection
cover over the hole for the stand.

pro-

damage.
©
Z

Loose the bolts from TV.

Detach the stand from TV.

After removing the protection
protection

paper from the

cover, adhere it to the TV as shown.

/
\\

PREPARATION
32LG20,32/37/42LG30,37/42/47/S2LGS0,

32/42/47/52LG70,47LGg0

,,,IImage shown may differ from your TV.

INSTALLATION (Only 32LG20,

DETACHMENT

32/37/42LG30,

37/42LG50,

32/42LG70)

Carefully
cushioned

Carefully place the TV screen side down on a cush-

place the TV screen side down on a
surface to protect

the screen from

damage.

ioned surface to protect the screen from damage.
O
z

s/s

\_\4'\:_'\__--.,Ji
.......

ssemble the parts of the STAND
with COVER BASE of the TV.

Loose the bolts from TV.

Detach the stand from TV.

BODY

BASE

Assemble the TV as shown.

PROTECTION COVER
After

removing

protection
O

Fix the 4 bolts securely
back of the TV.

using the holes in the

the

cover

install

the

included

over the hole for the stand.

Press the PROTECTION
until you hear it click.

stand,

COVER

into the TV

VESA WALL MOUNTING
Install your wall mount on a solid wall perpendicular
contact

to the floor. When attaching to other building

materials, please

your nearest dealer.

If installed

on a ceiling or slanted wall, it may fall and result in severe personal

We recommend
LG recommends

that you use an LG brand wall mount when mounting
that wall mounting

be performed

by a qualified

injury.

-O

the TV to a wall.

professional

installer.

32LG20, 32LG30, 32LG60, 32LG70

200 • 100

37LG30, 37LG60, 37LG50
42LG50, 42LG60, 42LG70,
47LG60, 47LG70, 47LG90,

200 • 200

42LG30,
47LG50,

42LGX
47LGX

....................
_2!_0,_2!_01_2!_70
.........................
800
_400
......................
M_
..............................
4.............
50PG25,

42PG25
50PG60,

60PG60,

400

• 400

600

• 400

50PG70

60PG70

PREPARATION
CABLE MANAGEMENT
,,,IImage shown may differ from your TV.
"O

Plasma TV Models

_o
m

Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT
SETUP section.

Install the CABLE MANAGEMENT

CLIP as

shown.
If your TV has the CABLE HOLDER, install it
as shown and bundle the cables.

CABLE HOLDER

How to remove the CABLE MANAGEMENT
42PG25
First, press the cable management. Hold the
CABLE MANAGEMENT
CLIP with both
hands and pull it upward.

CABLE MANAGEMENT

CLIP

50PG25,

50/60PG60,

50/60PG70

Hold the CABLE MANAGEMENT

CLIP with both

hands and pull it upward.

Separate CABLE MANAGEMENT
CLIP from TV
by pressing two latches.

CLIP

LCD TV Models
32LG20, 32/37/42LG30,
37/42/47/52LG50,
32/42/47/52LG70,
47LG90

onnect the cables as necessary.
To connect additional equipment,
EXTERNAL

_iiiiil

EQUIPMENT

ii ¸¸

_:-Ti

32/37/42/47/52LG60,

-O

_o
m

O
see the

Align the hole with the tab on the CABLE
MANAGEMENT
CLIP.
Turn the CABLE MANAGEMENT
shown.

SETUP section.

CLIP as

Note: This cable management clip can be broken by excessive pressure.

¸_iiii!iiii_!iiiiiiiiiiii!_i_iiii_
!iii_iii!!iii_

Install the CABLE MANAGEMENT
shown.

CLIP

O
O

42/47LGX

ut the cables inside the CABLE MANAGEMENT
CLIP and snap it closed.

Connect

the cables as necessary.

To connect additional equipment, see the
EXTERNAL EQUIPMENT
SETUP section.

ifii;i!:!!:!ii!iiii
_
ii_iiiiiiiiiii!i
i_i!_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_iii!ii!i_i!iijiiiiii
_ iii_!!!!!!!!!!!!!!i!iiiiiliiiiii_iiiiii!iiii!ii_ii_iii_i_i!_
_

PREPARATION
DESKTOP PEDESTALINSTALLATION
,,,IImage shown may differ from your TV.
For proper ventilation,

allow a clearance of 4 inches on all four sides from the wall.

-0

_o
l'rl

4 inches

4 inches
4 inches

4 inches

SWIVELSTAND
After installing

the TV, you can adjust the TV set manually to the left or right direction

by 20 degrees to suit

your viewing position.

•,,......._

..........

ATTACHING THE TV TO A DESK
(Only 32LG20, 32LG30/70,

37LG30/50,

42LG30/50)

The TV must be attached to a desk so it cannot be pulled in a forward/backward
injury or damaging the product.

1-Screw
(provided as parts of the product)
Desk

direction,

potentially

causing

SECURING THE TV TO THE WALL TO PREVENTFALLING
WHEN THE TV IS USED ON A STAND
""_You should purchase necessary components

to prevent TV from falling off of the stand.

""_Image shown may differ from your TV.
m

We recommend
Additionally,
potentially
Caution:

that you set up the TV close to a wall so it cannot fall over if pushed backwards.

we recommend

that the TV be attached to a wall so it cannot

Please make sure that children don't

Insert the eye-bolts
If your product

or TV brackets/bolts

climb on or hang from the TV.

(or TV brackets and bolts) to tighten

has the bolts in the eye-bolts

* Insert the eye-bolts

position

and tighten

the product

to the wall as shown in the picture.

before inserting

the eye-bolts,

loosen the bolts.

them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately)
mounted

be pulled in a forward direction,

causing injury or damaging the product.

to the wall. Match the height of the bracket that is

on the wall to the holes in the product.

Ensure the eye-bolts

or brackets are tightened

securely.

Use a sturdy rope (sold separately)
the rope so it becomes horizontal

to tie the product.

It is safer to tie

between the wall and the product.

PREPARATION
To prevent damage do not connect to the power outlet until all connections

are made between the devices.

ANTENNA OR CABLE CONNECTION
1. Antenna
l-rl

(Analog

or Digital)

Wall Antenna Socket or Outdoor

Antenna without a Cable Box

Connection.
For optimum picture quality, adjust the antenna direction

if needed.

Wall

(Connect

Antenna

to wall

antenna

socket)

................................

Socket
Outdoor
_
Antenna
(VHE , UHF

_ ]
_

RF Coaxial Wire (7S ohm) ....................................................................
/
.............................................................
...........
Single-family Dwellings/Houses
(Connect to wall jack for outdoor antenna)

I H
_
I Be careful not to bend the copper wire
I

when

connecting

the

antenna.

2. Cable
Cable TV
Wall Jack

01_
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

01_If the antenna

needs to be split for two TV's, install a 2-Way Signal Splitter.

01_If the antenna

is not installed

properly,

contact

your dealer for assistance.

EXTERNAL EQUIPMENT SETUP
,l_To prevent the equipment damage, never plug in any power cords until you have finished connecting

all equipment.

""_Image shown may differ from your TV.

HD RECEIVERSETUP
This TV can receive digital
you do receive digital

Component

over-the-air/digital

signals from

a digital

cable signals without
set-top

box or other

an external

digital

external

digital

set-top

box. However,

device.

Connection
m

1. How to connect

Connect

the video outputs

top box to the COMPONENT

(Y, PB, PR) of the digital
IN VIDEO

set-

1 jacks on
X:)
c

the TV. Match the jack colors (Y = green, PB = blue, and
PR = red).

onnect the audio output of the digital set-top box to
the COMPONENT
IN AUDIO 1 jacks on the TV.
c

2. How to use
Turn on the digital set-top box.
(Referto the owner'smanualfor the digital set-top box.operation)
Select the Component
1 input source on theTVusing
the INPUT button on the remote control.
If connected to COMPONENT
IN2 input, select the
Component
2 input source on the TV.

Supported

Resolutions

Y, CB/PB, CR/PR

Yes

[[[[

15.73
15.73

59.94
60.00

31.47
31.50

59.94
60.00

44.96
45.00

59.94
60.00

;3.72
33.75

59.94
60.00

26.97
2Z00
33.71
33.75
6Z432
6Z50

23.976
24.00
29.97
30.00
59.94
60.00

EXTERNALEQUIPMENT SETUP

Plasma TV, 32LG20, 32/37/42LG30,
37/42/47/52LG50,

32/42/47/52LG70,

'O1_!
m

X
m

z
m

JC)
C

z
m

32/37/42/47/52LG60,

42/47LGX

47LG90

HDMI Connection
1. How to connect
m

onnect the digital set-top box to HDMI/DVI
2, 3, or 4 jack on the TV.

IN1,

z
O

No separate audio connection is necessary.
HDMI supports both audio and video.

_D
C

2. How to use

01_
Turn on the digital set-top

box.

(Refer to the owner's manual for the digital
01_
Select the HDMI1,

HDMI2,

HDMIS,

set-top box.)

or HDMI4

source on the TV using the INPUT button
control.

input

on the remote

HDMI-DTV

26.97
2ZOO
33.71
33.75
6Z432
6Z50

23.976
24.00
29.97
30.00
59.939
60.00

EXTERNALEQUIPMENT SETUP

32LG20,

32/37/42LG30,

37/42/47/52LG50,

X
m

z
m

JC)
C

z
m

32/37/42/47/52LG60,42/47LGX

32LG70

Plasma TV, 42/47/52LG70,

47LG90

DVI to HDMI Connection
1. How to connect
m

x
O

2LG20, 32/37/42LG30,
- Connect the DVl output
32/37/42/47/52LG60,
- Connect

Connect

37/42/47/52LG50,
of the digital set-top
42/47/52LG70,

the DVl output

32LG70, Plasma TV
box to the HDMI/DVl

42/47LGX,

to the AUDIO

1,2,

or 3 jack on the TV.

47LG90

of the digital set-top box to the HDMI/DVl

the PC audio output

(RGB/DVl)

jack

1,2,

3, or 4 jack on the TV.

XD
ci

the TV.
z

2. How to use
Turn on the digital set-top

box. (Refer to the owner's manual for the digital set-top

32LG20,

37/42/47/52LG50,

box.)

c
"O

32/37/42LG30,

- Select the HDMI1, HDMI2, or HDMI3
32/37/42/47/52LG60,

HDMI3,

Plasma TV

input source on the TV using the INPUT

42/47/52LG70,

- Select the HDMI 1, HDMI2,
control.

32LG70,

42/47LGX,

or HDMI4

button on the remote control.

47LG90

input source on the TV using the IN PUT button on the remote

EXTERNALEQUIPMENT SETUP
32LG20,

32/37/42LG30,

37/42/47/52LG50,

32LG70

X
--t
m

z
m

z
--t
m

--t
C
-0

32/37/42/47/52LG60,42/47LGX

Plasma TV, 42/47/52LG70,

47LG90

DVD SETUP
Component

Connection

1. How to connect

Connect

the video outputs

COMPONENT

(Y, PB, PR) of the DVD to the

IN VIDE01

jacks on the TV.

Match the jack colors (Y = green, PB = blue, and PR = red).

x
m

z
m

Connect the audio outputs of the DVD to the
COMPONENT
IN AUDIO1 jacks on the TV.

XD
c

2. How to use

c
Turn on the DVD player, insert a DVD.
Select the Component
1 input source on theTVusing
the INPUT button on the remote control.
If connected
Component

to COMPONENT

2 input,

Refer to the DVD player's manual for operating

Component

select the

2 input source on the TV.
instructions.

Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component

ports on the TV

Video output ports
on DVD player

EXTERNALEQUIPMENT SETUP

Plasma TV, 32LG20, 32/37/42LG30,
37/42/47/52LG50,
32/42/47/52LG70,

X
--t
m
_o

z
m

C
"O
m

z
--t
m

--t
C
-O

32/37/42/47/B2LG60,42/47LGX

47LG90

S-Video Connection

(Except 32/37/42/47/52LG60,

I. How to connect

42/47LGX)

x
m

onnect
S-VIDEO

the S-VIDEO output
input on the TV.

of the

DVD to the

z
m

onnect the audio outputs
input jacks on the TV.

of the DVD to the AUDIO

X:)
c

2. How to use

Turn on the DVD player, insert a DVD.

Select the AVI
input source on the TV using the INPUT
button on the remote control.
Refer to the DVD player's manual for operating

-O

instructions.

EXTERNALEQUIPMENT SETUP

HDMI Connection

32LG20, 32/37/42LG30,
37/42/47/52LG50,
32LG70

1. How to connect
m

onnect the HDMI output of the DVD to the
HDMI/DVI
IN1,2,
3 or 4 jack on the TV.

No separate audio connection is necessary.
HDMI supports both audio and video.

z
m

X:)
c

2. How to use
m

z
m

.i. Select the HDMI1. HDMI2. HDMI3. or HDMI4 input
source on the TV using the INPUT button on the remote
control.
,l_Refer to the DVD player's manual for operating

Plasma TV, 42/47/52LG70,

47LG90

instructions.

32/37/42/47/52LG60,42/47LGX

VCR SETUP
To avoid picture

noise (interference),

Use the ISM feature

in the Option

of time (Plasma TV models

only).

leave an adequate

between

the VCR and TV.

menu to avoid having a fixed image remain on the screen for a long period
If the 4:3 picture

may remain visible on the screen. This phenomenon

Antenna

distance

format

is used; the fixed images on the sides of the screen

is common

to all TVs and is not covered

by warranty.

Connection

r'_

Plasma TV, 32LG20, 32/37/42LG30,
37/42/47/52LG50,
32/42/47/52LG70,

1. How to connect

r_3

47LG90

z
r_3

Connect the RF antenna out socket of the
VCR to the ANTENNA/CABLE
IN sock-

c
"O

et on the TV.
r_3

z
e

onnect the antenna cable to
antenna in socket of the VCR.

the

c
"O

2. How to use

Wall Jack

Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Antenna

Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)

32/37/42/47/52LG60,42/47LGX

Wall Jack

EXTERNALEQUIPMENT SETUP

Composite

(RCA) Connection
Plasma TV, 32LG20, 32/37/42LG30,
37/42/47/52LGS0,
32/42/47/S2LGTO,
47LG90

1. How to connect
m

x
m

Connect the AUDIO/VIDEO
jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)

z
m

_D
c

2. How to use
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
Select the AV 1 input source on the TV using the INPUT
button on the remote control.

If connected

to AV IN2,

select AV2

input source on the TV.

-O

32/37/42/47/S2LG60,

42/47LGX

S-Video Connection

(Except 32/37/42/47/52LG60,

42/47LGX)

I. How to connect
m

x
O

onnect
S-VIDEO

the S-VIDEO output
input on the TV.

of the

VCR to the
m

z
O

onnect the audio outputs
input jacks on the TV.

of the VCR to the AUDIO

X_
c

2. How to use
m

z
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
Select the AV 1 input source on the TV using the INPUT
button on the remote control.

EXTERNALEQUIPMENT SETUP
OTHERA/V SOURCESETUP
Camcorder

1. How to connect

x
m

Connect
between

the

Video Game Set
AUDIO/VIDEO

TV and external

jacks

equipment.

Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)

X:)
c
"0

2. How to use

z
m

c
"0

01_
Select the AV2 input source on the TV using
the INPUT button on the remote control.
01_
If connected

to AV

IN 1 input, select the AV 1

input source on the TV.
01_
Operate the corresponding

external equipment.

PC SETUP
This TV provides

Plug and Play capability,

meaning

that the PC adjusts

automatically

to the TV's settings.

VGA (D-Sub 15 pin) Connection
Plasma TV, 32LG20, 32137142LG30,
37142147152LG50,
32142147152LG70,

47LG90

32137/42/47/52LG60,42/47LGX

I'I"I

x
-I
m

z
m

c
-0
m

z
-I
m

-I
c
-0

I. How to connect
O

Connect

the VGA output

of the PC to the RGB (P C) jack on the TV.

Connect

the PC audio output

to the AUDIO

(RGB/DVI)

jack on theTV.

2. How to use
01_
Turn on the PC and the TV.
01_
Select the RGB-PC

input source on the TV using the INPUT

button

on the remote control.

EXTERNALEQUIPMENT SETUP

DVI to HDMI Connection
1. How to connect
m

2LG20,
- Connect

32/37/42LG30,

37/42/47/52LG50,

the DVI output

32/37/42/47/52LG60,

- Connect
X:)
c

2. How to use

Connect

of the PC to the HDMI/DVI
42/47/52LG70,

the DVI output

32LG70,
42/47LGX,

to the AUDIO

1,2,

or 3 jack on the TV.

47LG90

of the PC to the HDMI/DVI

the PC audio output

Plasma TV

(RGB/DVl)

1,2,

3, or 4 jack on the TV.

jack on the TV.

Turn on the PC and the TV.
c

32LG20,

32/37/42LG30,

37/42/47/52LG50,

32LG70,

Plasma TV

- Select the HDMI1,
32/37/42/47/52LG60,

HDMI2,

42/47/52LG70,

- Select the HDMI1, HDMI2,
control.

or HDMI3

HDMI3,

input source on the TV using the INPUT
42/47LGX,

or HDMI4

button

on the remote

control.

47LG90

input source on the TV using the IN PUT button on the remote

32LG20, 32/37/42LG30,

37/42/47/52LG50,

32LG70

Plasma TV, 42/47/52LG70,

47LG90

r'rl

X
m

z
m

I0
C

z
m

C
"0

32/37/42/47/52LG60,42/47LGX

EXTERNALEQUIPMENT SETUP

Supported

Display Specifications

(RGB-PC, HDMbPC)

X
m

z
For 32LG20, 32/37/42LG30

For37/42/47/S2LGSO,

32/37/42/47/S2LG60,

32/42/47/52LG70,42/47LGX,

47LG90

z
31.469

70.08

31.468

70.09

31.469

70.08

31.469

70.08

31.469

59.94

31.469
37.500

59.94
75.00

37.879

60.31

3Z861

72.80

48.363

60.00

4Z776

59.87

35.156
37.879
46.875
48.077

56.25
60.31
75.00
72.18

4Z720

59.799
48.363
56.476
60.023

60.00
70.06
75.02

47.776

59.87

63.981
79.976

60.02
75.025

47.712

60.015

75.00

60.00

66.587

59.934

!!!!!!!

4Z130

59.65

* Only RGB-PC mode

,._,

..................
.............................
60;;..............
•

•

* Only RGB-PC mode

X
...q
I"1"1

For 42/50PG25,

S0/60PG60,

S0/60PG70

1"'-

I"1"1

,0
C

I"1"1

31.468

70.09

31.469

70.08

31.469
3Z500

59.94
75.00

;7861

72.80

35.156
37.879
46.875
48.077

56.25
60.31
75.00
72.18

48.363
56.476
60.023

60.00
70.06
75.02

4Z776

59.87

63.981
79.976

60.02
75.025

4Z712

60.015

75.00

60.00

66.587

59.934

...q
I"1"1

--q
C

* Only RGB-PC mode

EXTERNALEQUIPMENT SETUP
Screen Setup for PC mode

Selecting

Resolution

You can choose the resolution in RGB-PC mode.
The Position,

Phase, and Size can also be adjusted.

x
m

z
m

X:)
c

z
m

Only for 32LG20,

32/37/42LG30

Select PICTURE.

Select Screen

(RGB-PC).

Select Resolution.

Select the desired resolution.

Auto

Configure

Automatically

adjusts

picture

position

and minimizes

image instability. After adjustment,

not correct, try using the manual settings or a different

if the image is still

resolution or refresh rate on the PC.
r'_

x
m

z
m

Select PICTURE.

Select Screen

(RGB-PC).

• If the position
correct,
• If picture
after Auto

Select Auto

config..

of the image is still not

try Auto adjustment

can adjust
Phase.

needs

adjustment
the

again.

be adjusted

again

in RGB-PC, you

Position,

Size

Select Yes.

Start Auto Configuration.

EXTERNALEQUIPMENT SETUP

Adjustment
If the picture

for screen Position,
is not clear after auto adjustment

Size, and Phase
and especially

if characters are still trembling,

adjust the picture

phase manually.
This feature

operates only in RGB-PC mode.

x
m

z
m

_D
c

z
m

Select PICTURE.
_ Position:
ture
Select Screen

(RGB-PC).

to left/right

Size, or Phase.

is to adjust pic-

and up/down

as you

prefer.
_ Size:

Select Position,

This function

is to minimize

bars or

visible

vertical

stripes

screen background.

any
the

And the horizontal

screen size will also change.
_ Phase:
Make appropriate

adjustments.

This

function

remove any horizontal
sharpen

allows

you

noise and clear or

the image of characters.

Screen Reset (Reset to original factory values)
Returns Position,
This feature

Size, and Phase

to the default

factory

settings.

operates only in RGB-PC mode.
m

x
m

z
m

c
-0

Select PICTURE.

Select Screen

(RGB-PC).

Select Reset.

Select Yes.

EXTERNALEQUIPMENT SETUP
USB CONNECTION

(Except

32LG20,

32/37/42LG30)

i e)

x
m

z
m

O
c

z
m

c
-O

1. How to connect

Connect the USB device to the USB IN jack on the side
of TV.

2. How to use
After connecting
tion. (_ p.64)

the USB IN jack, you use the USB func-

AUDIO OUT CONNECTION
Send the TV's audio to external

Analog

audio equipment

(Except 32/37/42/47/52LG60,

via the Audio

Output

port.

42/47LGX)

1. How to connect
r'_

x
O

Connect

audio outputs

to the TV's AUDIO

OUT jacks.

z
m

Set the "TV Speaker option - Off" in the AUDIO menu.
(_ p.93). See the external audio equipment instruction
manual for operation.

Digital

1. How to connect

Connect one end of the optical or coaxial cable to the
TV's OPTICAL or COAXIAL (Except 32LG20,
32/37/42LG30)
port of DIGITAL AUDIO OUT.

Connect the other end of the optical or coaxial cable to
the digital audio input on the audio equipment.

Set the "TV Speaker option

- Off" in the AUDIO menu. (b

p.93). See the external audio equipment
al for operation.

instruction

manu-

WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control,

aim it at the remote control

TV/STB/DVD/VCR Select the remote operating

mode: TV, STB, DVD, or VCR.

POWER Turns your TV or any other programmed
off, depending

Q.MENU
_h
I
z

sensor on the TV.

equipment

on or __

on the mode.

Select the desired quick menu source. _ p.51

MENU Displays the main menu.
Clear all on-screen

displays and return to TV viewing from

any menu.
<

INPUT
N
I
>
z
z

External input modes rotate in regular sequence.

VOLUME UP Increase/decrease
/DOWN

the sound level.

fT1

FAV Scroll through the programmed
N
©
Z

Favorite channels. _ p.51

MUTE Switch the sound on or off. _ p.50

CHANNEL Select available channels.
UP/DOWN

......

PAGE Move from one full set of screen information
UP/DOWN

MUTE

to the next one.

NUMBER button
-- (DASH)

Used to enter a program number for multiple
program channels such as 2-1,2-2,

etc.

FLASHBK Tune to the last channel viewed.
VCR/DVD, USB, o Control
SIMPLINK
Control
Control buttons
Q Control

video cassette recorders

or DVD players.

USB menu (PHOTO LIST and MUSIC LIST.)
the SIMPLINK compatible

i iii Z i

devices.
_ii!

ICII

THUMBSTICK
(Up/Down/Left
Right/ENTER)

Navigate the on-screen

menus and adjust the system settings to your preference.

RETURN Allows the user to move return one step in an interactive application or other user interaction
function.
SIMPLINK See a list of AV devices connected
When you toggle

AV MODE

to TV.

this button, the SIMPLINK

menu appears at the screen. _ p.62-65

N
-r"
z

It helps you select and set images and sounds. _ p.61
<
N
-r
>
z
z
fT1

N
©
Z
©

WATCHING TV / CHANNEL CONTROL
TURNING ON THE TV

First, connect

power cord correctly.

At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the (b/l,

INPUT, CH (AT

button on the TV or press the POWER, INPUT, CH(^
(0~9) button on the remote control.

or ^ v )

or v ), Number

Select the viewing source by using the INPUT button on the remote control.
01_
This TV is programmed

to remember which power state it was last set to,

even if the power cord is out.
"-r"
z

When finished using the TV, press the POWER button on the remote control.
The TV reverts to standby mode.

<
N
-r
>
z
z
fT1

N
©
Z
©

CHANNEL SELECTION
O

Press the CH ( ^

or v ) or NUMBER buttons to select a channel number.

VOLUMEADJUSTMENT
Adjust

the volume

to suit your personal

Press the VOL (+ or -) button

preference.

to adjust the volume.

If you want to switch the sound off, press the MUTE button.

You can cancel the Mute function
button.

by pressing the MUTE or VOL (+ or -)

QUICK MENU / FAVORITECHANNEL SETUP
Your TV's OSD (On Screen Display)
Q.Menu

may differ slightly

(Quick Menu) is a menu of features

Aspect

Ratio:

which users might use frequently.

Selects your desired picture format.

Power
Saving
(Plasma TV Only): Adjusts screen
brightness to reduce the power consumption of the TV.
Backlight
(LCD TV Only): Adjust the brightness
of LCD panel to control the brightness of the screen.
Clear Voice: By differentiating
the human sound
range from others, it helps make human voices
sound better.
Picture
depend

Mode: Selects the factory
on the viewing environment.

from what is shown in this manual.

Del/Add/Fav:
Select channel you want to add/delete
or add the channel to the Favorite List.
Favorite

Channle

preset picture

Select

your desired

channel.

Select Del/Add/Fav.
z

Sound Mode: Selects the factory preset sound for
type of program.
Caption:

_ ,_,

Setup

Select Favorite.
<

Select on or off.

Multi
Audio:
signal).

Changes the audio language

(Digital
Return to TV viewing.

SAP: Selects MTS sound (Analog signal).
Sleep
Timer:
Select the amount
your TV turns off automatically.
USB Eject:
USB device.

Select

"USB Eject"

of time before

fT1

01_Totune to a favorite channel, press the FAV
in order

_- Plasma TV

to eject

(Favorite)

button repeatedly.

Display each menu.

N
©
Z
©

,_ LCD TV

Except 32LG20,

Make appropriate

N
-r
>
z
z

32/37/42LG30

Return to TV viewing.

adjustments.

WATCHING TV / CHANNEL CONTROL
INITIAL SETTING
This Function

guides

the user to easily set the essential

chasing the TV. If will be displayed
vated from the user menus.

0_Default selection is "Home".
home environment.
01_
"In-store"

We recommend

Mode is only intended

0_"In-store"

Mode is an optimal

image quality
"Local

setting

and operates "TruMotion

Dimming

Demo

setting

(For 47LG90)"

the TV for the first

the TV to "Home"

mode for the best picture

Customers

Demo

at stores. "In-Store"

(For 37/42/47/52LG60,

after a certain

in your

can adjust the "Picture

the TV, but the TV will automatically

for displaying

time when pur-

the TV on for the first time. It can also be acti-

for use in retail environments.

Picture
mode"
manually while inspecting
mode after 5 minutes.

-r"
z

items for viewing

on the screen when turning

return

mode initializes
42/47/52LG70,

to preset in-store

the TV to set the
42/47LGX)"

period of time.

<
N
-r
>
z
z

Step1.

Mode setting

fT1

N
©
Z

Select Home

Mode.

Step2. Time setting
Select Auto

or Manual.

Select desired time option.

menu -

Step3. Option

setting
Select OSD Language Setting
Audio Language Setting.

Select your desired language.

-r"
z
<
N
"1>
z
z
r_l

Step4. Auto Tuning

N
©
Z
©
Start Auto

Tuning.

WATCHING TV / CHANNEL CONTROL
ON-SCREENMENUSSELECTION
Your TV°s OSD (On Screen Display)
All models

may differ

from

that shown in this manual.

(Except 32LG20.32/37/42LG30)

CHANNEL
_Auto

Move

,_,_o,
PICTURE

_, Enter

Tuning
Manual

slightly

i Aspect Ratio

Tuning

Channel Edit

Picture

Mode

AUDIO

_ Enter

I Auto

+ M.... E.ter

Volume

Off

: Standard
• Backlight

• Contrast

• Brightness

• Sharpness

• Color

Balance
Clear
Vo,ce

_
,Z,

O _@{_I@ll[_l'_ _

I Sound Mode
i
i
I

Standard
• SRSTruSurround

XT Off

• Treble

5Oll_l

• Bass

50_

Move

16:9

• Tint

n
-1-

I
OPTION

,_, M ....

Language

Fl
-r

Input

z
z
N

o
I

_._

Enter

CHANNEL

: On

PICTURE

: Level O

,> Move , E.ter
: Feb/21/2008

---'
_

I, On Time

. Off

,i
LOCK

1
LOCK

INPUT

2 10AM

: Off

Sleep Timer

: Off

Auto

: Off

Sleep

--._

,> Move; Enter

USB

: 1

0
' •

TIME

TIM E
i
Clock
i
; Off T,me

: Off
. Normal

I
i Power Saving
J I Set ID

AUDIO

: Off

OPTION

I,,,©

Label

Caption
ISM Method

_Z:,

: English

SIMPUNK
I
[ Key Lock

,._

Reset
v

INPUT

,, ,,D

,:, M0v0 . E_ter _

9 USB

Move

,, Enter

i
I Lock System

LJ
"_

: Off

Antenna

Off

Set Password

Block Channel

AV1

TV Ratmg-Enghsh

,.j

AV2

I Movie Rating
I

TV Rating-French
TV Rating-General
"i"V Rating-Children
Downloadable
Rating

Lock System

Downloadable
Input

PHOTO LIST
_: i MUSIC LIST

Cable

Componentl
Rating

Component2

Block
_

! Input Block

, HDMI1
RGB-PC

For USA

For Canada

..........
NOTE

v°'

>:,Display each menu.

2
\ ....

Select a menu item.

3
_

Enter to the pop up menu.

4
MENU

Return to TV viewing.

IIIlil,,_...
ISM Method,
Plasma TV.

Power Saving: Only

II;..Backlight,
Power Indicator,
TruMotion
Demo: Only LCD TV.
(But, TruMotion
Demo: Only for
37/42/47/52LG60,
42/47/52LG70,
42/47LGX, 47LG90)
I,m,,,,,.
Set ID: Except32/3 7/42/47/52LG60,
42/47LGX.
IIII,_'...
Local Dimming, Local Dimming
Demo: Only 47LG90

Only for 32LG20,

32/37/42LG30

"1z
<
N
I
>
z
z
fT1

N
©
Z

For USA

For Canada

Display each menu.

Select a menu item.

Enter to the pop up menu.

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL
CHANNELSETUP
Auto Scan (Auto
Automatically
channel list.

Tuning)

finds all channels available

through

Run Auto Tuning again after any Antenna/Cable

antenna

connection

or cable inputs, and stores them

in memory

on the

changes.

z
<
N
-r"
>
Z
Z
r_l

N
©
Z

Select CHANNEL.

Tuning.

01_
A password is required

to gain access to

Auto Tuning menu if the Lock System is
turned on.
Select Yes.

Run Auto

tuning.

Return to the previous menu.

Return to TV viewing.

Add/Delete
If selecting

Channel

(Manual

DTV or CADTV input

Tuning)

signal, you can view the on-screen

signal strength

monitor

to see the quality

of the signal being received.

N
-r"
z
c_
<
N
-r"
>
Z
Z
fT1

N
0
Z

Select CHANNEL.

0
Select Manual

Tuning.

01_
A password is required

Select DTV, TV, CADTV, or CATV.

to gain access to

Manual Tuning menu if the Lock System
is turned on.

Select channel you want to add
or delete.

Select Add

or Delete.

Return to the previous menu.

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL
CHANNELSETUP
Channel
A custom

Editing

list can be created

List are displayed

by toggling

each channel on or offwith

in black and the channels deleted

Once a channel is highlighted
right corner of the screen.

you can add or delete

ENTER button.

from the Custom
the channel

The channels

List are displayed

by referring

in the Custom

in gray.

to the small window

at the top-

N
-r"
z
<
N
-r
>
z
z
fT1

N
©
Z

(_ Add/Delete

Select CHANNEL.

Select Channel

Edit.

Select a channel.

Select channel you want to add or
delete.

Return to the previous menu.

Return to TV viewing.

_:_ Move

Move

Page

Previ....

Exit

INPUT LIST
Only these input

signals which are connected

to a TV can be activated

and selected.

Select the desired input source.
You can also select

the desired

input

N
-r
z

source in the INPUT

(Except 52LG20, 52/57/42LG50).
52LG20,

32/37/42LG50,

37/42/47/52LG50,

32LG70

Antenna
i'[ Cob,e
1"1 AVl].[ AV2[.[ Component1
[.[Component2j
t
HDMI3

Ho_,_].

]

HO_,_] .

I_C]

N
-r
>
z
z
fT1

Plasma TV, 42/47/52LG70,

47LG90

N
©
Z

Cob,e
i'i AVl].[ AV2[.[ Component1
[.[Component2j

Antenna].[

HDMI4

32/37/42/47/52LG60,

HDMI3

_1--

HDMI2

_,_

HDMI1

RGB-PC

42/47LGX

_n_enno
. Co_,e
].

_V] .

[ComponentS]
. [Componen_
i

ie)

Disconnected inputs are inactive (grayed out)

Select a desired input source (except
Antenna or Cable). Then, you can select
[ _Q,__U InputLabel [ t_ET[J_
Exit

0101_
Antenna:
0101_
Cable:

Select it to watch over-the-air

your desiredInput Labelwith using Q. MENU
button. _ p.60

broadcasts.

Select it to watch cable and digital cable.

0101_
AV: Select them to watch a VCR or other external equipment.
0_0_
Component:
0101_
RGB-PC:
f_l_HDMI:

Select them to watch DVD or a Digital

set-top box.

Select it to view PC input.

Select them to watch high definition

devices.

WATCHING TV / CHANNEL CONTROL
INPUT LABEL
You can set a label for each input source when it's not in use.

N
-r"
z
32LG20,

<
N
-r"
>
Z
Z

32/37/42LG30,

32/37/42/47/52LG60,

37/42/47/52LG50,

Plasma TV, 42/47/52LG70,

32LG70

47LG90

With using OPTION menu

42/47LGX

With using INPUT button

fT1

N
0
Z

Select OPTION.

Select the source.

Select Input

Select the label.

Label.

Select the source.
Return to the previous menu.

Select the label.

Return to TV viewing.

Return to the previous menu.

Return to TV viewing.

When new external device is connected,

this popup menu is displayed

automatically.

If selecting Yes, you can select input source that you want to appreciate.
But, when selecting

"SlMPLINK

- On", popup menu for HDMI input will not be displayed.

AV MODE
You can select the optimal

images and sounds.

All models (Except 50/60PG60,

50/60PG70)

T
Only for 50/60PG60,

-r"
z

50/60PG70

÷
<
N
I
>
z
z
N
©
z
Press the AV MODE

button

repeatedly

to select the desired source.
©

0_If you select "Cinema
in AV mode, Cinema
both
for "PICTURE
Mode"
Mode"

and

"AUDIO

/ HT_Z Cinema"
will be selected
menu - Picture
menu

Sound

respectively.

01_
If you select "Off"
in AV mode, the
"Picture
Mode"
and "Sound
Mode"
return to previous selected

value.

WATCHING TV / CHANNEL CONTROL

C,_ImPLInK
This function
The TV might

operates

only with devices with the

not function

This allows you to control

properly

_._ImPLInK

and play other AV devices connected

settings.
To start using SlMPLINK,

turn

it on in the user menus.

-r"
z
<
N
-r"
>
Z
Z
fT1

Select OPTION.

N
0
Z
_m

Select SIMPLINK.

Select On

or Off.

Return to the previous menu.

Return to TV viewing.

logo.

when using it with other

products

with HDMI-CEC

with HDMI cable without

function.
additional

cables and

SIMPLINK Functions
Direct

Play:

out additional
_Select
Disc

AV device:
playback:

01_
Power

off

_Switch
Sync

After connecting

control

Enables you to select one of the AV devices connected

Control

all devices:

audio-out:
Power

AV devices to the TV, you can directly

the devices and play media with-

settings.

connected

AV devices by pressing the ^

When you power offthe

TV, all connected

to TV.

< > , ENTER, I_, II, I L _I_I and I_I_ buttons.

devices are turned off.

Offers an easy way to switch audio-out.

on: When you play the connected

(A device, which is connected

to the TV through

AV device, TV will automatically

a HDMI cable but does not support

turn on.
SIMPLINK, does not provide

this function)
Note: To operate SIMPLINK, an HDMI cable over Version I .2 with _CEC function
Electronics

should be used. '_CEC: Consumer

N
-r"
z

Control).
<
N
I
>
z
z
fT1

Display SIMPLINK

menu.

N
©
Z
©

Select the desired device.

Control

connected

AV devices.

SIMPLINK Menu
@ TV viewing: Switch to the previous TV
channel regardlessof the current mode.
@ DISC playback: Select and play discs.
When multiple discs are available,the titles
of discs are conveniently displayed at the
bottom of the screen.
@ VCR playback:
VCR.

Control the connected

@ HDD Recordings
playback:
recordings stored in HDD.

When no device is connected
(displayed in gray)

Control

@ Audio Out to Home Theater speaker/Audio
Out to TV: Select Home

Selected

Device

When a device is connected
(displayed in bright color)

Theater speaker or TV speaker for Audio
Out.

USB
* Except 32LG20,

32/37/42LG30

ENTRY MODES
When you connect

a USB device, this screen is displayed

In USB device, you can not add a new folder

Connect

the USB device to the USB

or delete

automatically.

the existing folder.

IN
y

jacks on the side of TV.

_ It doesn't

support

This TV supports

When
C

removing

Select the USB
USB device.

Select PHOTO

LIST or MUSIC

USB HDD
JPG and MP3.

the
Eject

USB device
menu before removing

LIST
Select USB

Precautions

Eject.

when using the USB device

Only a USB storage device is recognizable.
If the USB storage device is connected through
USB hub. the device is not recognizable.
A USB storage device using an automatic
tion program may not be recognized.
A USB storage device which
may not be recognized.

recogni-

uses its own driver

In case of a card reader, up to four memory
are concurrently
recognizable.
_ The recognition
speed of a USB storage
may depend on each device.

cards
device

Please do not turn off the TV or unplug the USB
device when the connected USB storage device is
working, When such device is suddenly separated
or unplugged, the stored files or the USB storage
device may be damaged.
_, Please do not connect the USB storage device
which was artificially maneuvered on the PC. The
device may cause the product to malfunction
or
fail to be played. Never forget to use only a USB
storage device which
mage files,

the

has normal

music files or

Please use only a USB storage device which was
formatted as a FAT or NTFS file system provided
with the Windows operating system. In case of a
storage device formatted as a different utility program which is not supported by Windows. it may
not be recognized.
Please connect power to a USB storage
which requires an external power supply.
the device may not be recognized.

device
If not.

Please connect a USB storage device with cable is
offered by USB maker. If connected with cable is
not offered by USB maker or an excessively long
cable, the device may not be recognized.
Some USB storage devices may not be supported
or operated smoothly.
_-, File alignment

method

of USB storage

device is

similar to Window XP and fi ename can recognize
up to 100 English characters.
Please backup important
files because data on
USB device may be damaged. Data management is
consumer's responsibility and as a result, the manufacturer

does not cover data damage.

PHOTOLIST
You can view .JPG files from
The On Screen Display

Supported

photo

USB storage

on your

model

devices.

may be slightly

different.

file: *.JPG

You can play JPG files only.
Only baseline scan is supported

amongJPG.

c
Do

Screen Components

Select USB.

]

d_ Moves to upper level file
0'

Preview:

Display

thumbnail/folder

Select PHOTO

..........

LIST.

ooo , °oMo oo

the

name of

the photo in the selected
folder
0

Current

page/Total

pages

Total number of marked photos

Usable USB memory

Corresponding

buttons on

the remote control

I ':'

Navigate

PopUp Menu

Move Page

Mark

¢R_T _N Exit I

USB

Photo Selection

and Popup Menu

Fr_eSpa(_ 150MB

C
_'*

Navigate

PopUp Menu

Move Page

_AV_

Mark

Exit

$
When you select a file (not folder), this PopUp
menu is displayed.
t__Vie_. Display the selected item.
_, Mark All: Mark all photos on the screen.
_ Unmark
_ Delete:
,:,Navigate

_)PopUpMenu

MovePage

FAY

Mark

Exit

All: Deselect all marked photos.
Delete the selected photo item.

_ Cancel: Close the pop-up menu.

Select the target folder or drive.
Use the CH
photo page.
Select the desired photos.

^ v

Use the FAV button

button

to navigation

in the

to mark or unmark a

photo. When one or more photos are marked.
you can view individual photos or a slide show
of the marked photos. If no photos are marked.

Show the Popup menu.

you can view all photos individually
tos in the folder in a slide show.
Select the desired

Popup menu.

or all pho-

Full Screen Menu

You can change the Photo
screen mode.

List view so that

it fills the screen. More operations

are available

in full

Navigate

(_ PopUp Menu

Move

Page

Mark

Exit

!ii!!iiii,
i_i_
,:_

Navigate

(_ PopUp Menu

Move

Page

_A_!I

Mark

Exit

The aspect

ratio of a photo

may change the size of

the photo displayed

on the screen in full size.

_UsetheCH

_ _

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

Select View.

The selected
full size.

photo is displayed

button to na_igation

in the

USB

Select the Sideshow, BGM,
Delete, Option, or Hide.

(Rotate),

m Use
v < > button to select and control
the menu on the full_sized screenl
C
oo

_,, Sideshow:

Selected

photos

are displayed

during

slide show. If no photo is selected, all photos
rent folder are displayed

the

in the cur-

during slide show.

_ Set the time interval of the slide show in Option.
_ A slide show continues
After

for a maximum

of 4 hours.

4 hours, the slide show will end and go to TV

mode or external input mode.
_,, BGM:

Listen to music while viewing photos

in full size.

iiiiiiii@
@

Set the BGM device and album in Option.
_,,

(Rotate):

Rotate photos.

@ @ii!i!i

_ Rotates the photo 90 °, 180 °, 270 °, 360 ° clockwise.
_*_,,
Delete:

Delete photos.

_,,Option:
Folder.

Set values

Use <

button

Then go to _

for

Slide

and ENTER

Speed
button

and

Music

to set values.

and press ENTER to save the set-

tings.
_You

cannot

change

Music

Folder

while

BGM

playing.
_u_Hide

: Hide the menu on the full-sized

screen.

mTo see the menu again on the full-sized
ENTER

button

to display.

screen, press

most JPEG images saved using the
Progressive optionl
............................

MUSIC LIST
You can use the Music
This TV cannot

List menu to play MPS files form

play back copy-protected

The On Screen Display

on your

model

a USB storage

device.

files.
may be slightly

different.

Supported music file: *.MPS
Bit rate range 40Kbps - S20Kbps
• Sampling rate (Sampling Frequency)
MPEG1 : 52000, 44100, 48000Hz

MPEG2 : 16000, 24000, 22050Hz

MPEG2.5 : 16 - 48KHz

Screen Components

Select MUSIC

Select USB.

O
G

LIST.

Moves to upper level file
Preview:

If any album

for the file exists,

jacket

this jack-

et is displayed.
Q

Current

page/Total

pages

Total number of marked
musics

0
Q

Usable USB memory
Corresponding

buttons

the remote control

on
I '_"

Navigate

(_) PopUp Menu

Move Page

CFAV; Mark

Exit I

USB

Music Selection
Up to 6 music titles

and Popup Menu

are listed per page.

_,_,Play

(During

stop): Play the selected

music.

Once a song finishes playing, the next selected
one will be played. When there are no selected
musics to play, the next one in the current
er will be played. If you go to a different
and
C

_::_ Navigate

(_ PopUp Menu CH

Move Page

Mark

Exit

the

ENTER

button,

the

folder
current

music in playback will stop.
_, Play

press

fold-

Marked:

Play the selected

musics. Once

a music finishes playing, the next selected one
will be played automatically.
_,_,Stop

Play

(During

playback):

Stop the play-

ing musics.
_,_Play with Photo: Start playing the selected
musics and then move to the Photo List.
t_, Mark
_,,,Unmark

Navigate

_ PopUp Menu CH

Move Page

All: Mark all musics in the folder.
All: Deselect all marked music.

_,_Delete:

Delete the selected

_,,,Cancel:

Close the pop-up

music.

iiii!_Ni:Exit

menu.

Select the target folder or drive.
Use the CH ^ v
the music page.
Select the desired musics.

button to navigation

Use FAV button to mark or unmark a music
file. If no music is marked, all the music in the
folder will be played in sequence. When one or
more music files are marked, the marked music

Show the Popup menu.

files will be played in sequence.

If you want to

listen to only one song repeatedly, just mark
Select the desired Popup menu.

Return to TV viewing

that one file and pav.

The play information box (as shown below) will automatically
move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended
period of time.

When music is playing, _
A damaged

or corrupted

is displayed

in front of the music play time.

music file that does not play Gisplays 00:00

Music files with copy-protection

will not play.

Press ENTER.

button

•.

or RETURN

as the play time.

to stop the screen saver.

This TV can not play music files less than 16 Kbytes.

PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
RGB-PC input source use 4:3 or 16:9 aspect ratio.

N
C
_o
m

N
©
Z
_o

Select PICTURE.
_f_You can also adjust Aspect
the Q-Menu.
Select Aspect

Ratio.

Select the desired picture format.

Return to the previous menu.

Return to TV viewing.

Ratio

Set by program

Zoom

Selects the proper picture proportion to match
the source'simage.

Choose

Zoom 1 when you want to view the pic-

(4:3"*

ture without
bottom

4:3)

any alteration.

portions

However, the top and

of the picture will be cropped.

m
v..
.....................

m
_u

(16:9--_ 16:9)
Zoom

Choose Zoom 2 when you want the picture to be
altered,

both

The picture
alteration

vertically
taking

extended

and cropped.

a halfway trade off between

and screen coverage.

N
C
_o
m

N
O
Z

4:3

Choose

4:3 when you want

to view a picture

with an original 4:3 aspect ratio.

Just

Scan

Normally
1-2%.

the edges of video signals are cropped

Just Scan turns

shows the complete

off this

cropping

and

video.

Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.

16:9
Adjust
portion

Just
the picture

horizontally, in a linear pro-

to fill the entire screen.

Scan operates only in

DTV/CADTV/Com
(720p/1080i/1080p)

po nent/H DM I-DTV/DVI-DTV
input source.

PICTURECONTROL
PRESETPICTURE SETTINGS
Picture Mode - Preset
There

are factory

presets for picture

setting

manually,

or use the Intelligent

settings

available

in the user menus. You can use a preset,

change each

Sensor.

57/42/47/52LG50,

52LG20,

50/60PG60,

52/57/42/47/52LG60,

52/57/42LG50,

50/60PG70

52/42/47/52LG70,

42/50PG25

42/47LGX,

47LG90

N
C
_o
r_l

0_When selecting

Select PICTURE.

N
©
Z
_o

Select Picture

Mode.

Select Intelligent
Sensor (Except
52LG20, 52/57/42LG50, Plasma TV),
Vivid, Standard, Cinema/
Cinema (Only for 50/60PG60,
50/60PG70), Sport, or Game.
Return to the previous menu.

Return to TV viewing.

Intelligent

Sensor

(Except 32LG20, 32/37/42LG30,
Plasma
TV), the most suitable picture is automatically
adjusted according to the surrounding
conditions.
01_
Vivid,
Standard,
Cinema/
Cinema, Sport, and Game Settings are
preset for the optimum picture quality at
the factory and are not adjustable.
01_
You can also adjust
the Q. Menu.

Picture

Mode

01__
Cinema
(Only for 50/60PG60,
50/60PG70):
This is cinema quality
mode to provide you the experience of
watching a movie at home. The user will
be able enjoy the best level of satisfactory screen quality in any movie without
any separate adjustments.
_
Cinema
expresses the optimal
screen quality
when it is darkest.
0101_
When selecting _
Cinema,
ratio changes to Just scan.

Aspect

HTn-_(Thomlinson
Holman's Experiment)
is the
audio and video certification
standard of THX
established
by George Lucas, who directed the
movie Star Wars, and Thomlinson.
This is the product to be certified in THX display
area and guarantees screen quality that exceeds the
display standard specification in both hardware and
s oftwa re.

Color

Tone - Preset

Choose one of three automatic color adjustments.
cool to see less intense colors with more blue.

Set to warm to enhance

hotter

colors

such as red, or set to

N
C
m

N
O
Z
O

Select PICTURE.

Select Advanced

Select Color

Select Cool,

Medium,

Control.

Temperature.

or Warm.

Return to the previous menu.

Return to TV viewing.

PICTURECONTROL
MANUAL PICTUREADJUSTMENT
Picture Mode - User Mode
Adjust

the picture

appearance

to suit your preference

LCD TV only: This feature

is disable

50/60PG60,

only: This feature

50/60PG70

in "Picture

and viewing

situations.

Mode-Intelligent
is disabled

in "Picture

N
C
m

N
O
Z
O

Select PICTURE.

Select Picture

Select Vivid,

Mode.

Standard,

Cinema,

Sport,

or Game.

Select Backlight (Only LCD TV), Contrast,
Brightness, Sharpness, Color, or Tint.

Make appropriate

adjustments.

Return to the previous menu.

Return to TV viewing.

Sensor".
Mode-

Cinema".

Picture Mode - Expert Control
By segmenting
fit, offering

categories,

the optimal

Expert1

picture

and Expert2

quality

provide

more categories

which users can set as they see

for users.

N
C
m

N
O
Z
Select PICTURE.
O
Select Picture

Mode.

Select Expert1

or Expert2.

Select Expert

Control.

Select your desired menu option.

Make appropriate

adjustments.

Return to the previous menu.

Return to TV viewing.

PICTURECONTROL
PICTURE IMPROVEMENT TECHNOLOGY
Fresh Contrast:
Fresh Color:

Adjusts

Noise Reduction:
Gamma:
Color
"Picture

Optimizes

the contrast

the color

of the reflection

Removes interference

High gamma values display

Gamut (Only

for 47LG90):

Mode-Vivid,

automatically

according

automatically

up to the point

whitish

to the brightness

to reproduce

images and low gamma values display

high contrast

Select the range of colors that can be expressed.This

c
r_

Select PICTURE.

Select Advanced

Control.

Select Fresh
Contrast,
Fresh
Color,
Reduction,
Gamma, or Color
Gamut.

Select your desired options.

Return to the previous menu.

as close as possible

where it does not damage the original

Sport".

Return to TV viewing.

of the reflection.

Noise

feature

natural

colors.

picture.
images.
is disabled

ADVANCED CONTROL- BLACK (DARKNESS) LEVEL
Adjusting

the contrast

This feature

is disabled

and the brightness

of the screen using the black level of the screen.

in DTV and RGB-PC mode.

N
C
m

N
©
Z
Select PICTURE.
©
01_
Low: The reflection
darker.
Select Advanced

Control.

01_
High:

The reflection

of the screen gets

brighter.
01_
Auto:
Select Black

Level.

Realizing the black level of the

screen and set it to High or Low automatically.

Select Low or High.

Return to the previous menu.

Return to TV viewing.

PICTURECONTROL
ADVANCED CONTROL- EYECARE-LCDTVOnly
Dims extremely
This feature

bright

is disabled

pictures.
in "Picture

Mode-Vivid,

-O

c
_o
m

Select PICTURE.

Select Advanced

Select Eye

Control.

Care.

Select On or Off.

Return to the previous menu.

Return to TV viewing.

Cinema".

ADVANCED CONTROL - REALCINEMA / FILM MODE
Set up the TV for the best picture
When

you operate

adjust

24 fps video from

appearance

Real Cinema/Film

Plasma TV, 32LG20,

Mode

(3:2

movies.

Pull-Down

Mode

or Cinema

Correction

Mode),

the TV will

movies to 30 fps video for display.

32/37/42LG30

This feature operates only in TV (Analog
and HDMI 1080i mode.
37/42/47/52LG50,

for viewing

32LG60,

TV/CATV,

Digital

DTV/CADTV),

AVl,

AV2, Component

TV/CATV,

Digital

DTV/CADTV),

AV1, AV2, Component

480i/1080i,

32LG70

This feature operates
only in TV (Analog
and HDMI 1080i mode.

480i/1080i,

This TV ouputs 48Hz in DTV, Component, and HDMI 1080p (24Hz).
37/42/47/52LG60,

42/47/52LG70,

42/47LGX, 47LG90

This function works with all inputs except PC mode.

Off

C
m

N
O
Z
O

For Plasma TV

For LCD TV

Select PICTURE.
Select On or Off.

Select Advanced

Control.
Return to the _revious menu.

Select Real Cinema or Film
Mode.

Return to TV viewing.

PICTURECONTROL
ADVANCED
CONTROLTRUMOTIONOn 37/42/47/52LG60,
42/47/52LG70,42/47LGX,47LG90
TruMotion
provides even better quality for movies than 3:2 Pull-Down conversions.
TruMotion
means the panel supports faster frame rates that normal panels which makes for smoother motion
in video. TruMotion
LCD models support 120Hz instead of 60Hz. This means twice the information
on the
screen in the same amount of time and easier film conversions
(120 is equally divisible by 24, so no interpretations or double frames are needed).
TruMotion works with all inputs except PC mode.

Select PICTURE.
"O

Return to the previous menu.

N
C
Select Advanced

Control.
Return to TV viewing.

N
O
Z

ruru_
High: Provides smoother picture movement.
rurur
Low: Provides smo.oth picture movement. Use
this setting for standard use.
rurur
Off: Use this setting when "High"and "Low" setting result in noise.
0_0_
If you enable "TruMotion",
noise may appear on
the screen. If this occurs, set "TruMotlon" to "Off'.

Select TruMotion.
O

Select Off, Low, or High.

TRUMOTION DEMO- Only37/42/47/$2LG60,
Use this feature
TruMotion

works

to see the difference
with all inputs

TruMotion

42/47/$2LG70,

42/47LGX,

makes.

except PC mode.

Select PICTURE.

Select TruMotion

Demo.

Begin TruMotion

Demo.

Stop TruMotion

Demo.

Return to TV viewing.

47LG90

LOCAL DIMMING Only47LG90
After

analyzing

contrast

the signal of the input video by areas of the screen, it adjusts the backlight

ratio. This feature

is disabled

in "Picture

Mode-Cinema,

Select PICTURE.

to improve

the

Game".

Select O n or Off.
-O

N
Select Local

Return to the previous menu.

Dimming.

C
_o
m

N
O
Z

Return to TV viewing.

LOCALDIMMING DEMO Only47LG90
Use this feature

to see the difference

Local Dimming

makes.

Select PICTURE.
Begin Local

Select Local

Dimming

Demo.

Demo.
Stop Local

Dimming

Demo.

Return to TV viewing.

PICTURECONTROL
PICTURE RESET
Settings

of the selected

picture

modes return

N
C
m

N
O
Z
O

Select PICTURE.

Select Reset.

Initialize the adjusted value.

Return to TV viewing.

to the default

factory

settings.

POWER INDICATOR- LeDTVOnly

Only for
32/37/42/47/52LG60,
42/47LGX

N
C
_D
m

N
©
Z
_D

Select OPTION.
0_Startup

Select Power Indicator.

starting
ume.

Sound:

Srartup
Sound,
Standby
Power Light or Demo Mode.

off the

sound of the TV or set the vol-

01_
Standby
Select
Light,

You can turn

Light:

brightness

You can set the

of the LED on the front side

of the TV during power standby.
01_
Power Light: You can set the the LED
on the front side of the TV to be turned

Select your desired options.

on or off while watching
0_Demo

Mode:

the TV.

You can set the LED on

the front side of the TV to flash.
Return to the previous menu.

Return to TV viewing.

PICTURECONTROL
IMAGESTICKING MINIMIZATION (ISM) METHOD- Plasma
rv Only
A frozen still picture

from a PC/video

image. You can use Orbiter

game displayed

to help prevent

on the screen for prolonged

image sticking.

The other

periods

two functions

can result in a ghost

are for removing

a ghost

image.

N
C
m

Select OPTION.

N
O
Z
O

Normal:

If image

problem,
Normal.
Select ISM

Method.

Orbiter:
ghost

Orbiter

Return to the previous menu.

is never

may

help

- set to

prevent

images. However, it is best not to

allow any fixed
Select Normal,
Orbiter,
Inversion
or White
Wash.

sticking

ISM is not necessary

image to remain on the

screen. To avoid a ghost

image on the

screen, the image will move every 2 minutes.
Inversion:
invert

Inversion

the

plasma

will automatically

display

panel

color

every 50 minutes.
Return to TV viewing.

White
ghost

Wash:

White

Wash

removes

images from the screen. Use spar-

ingly. Watch the TV normally for a while
before
ghost

using this feature
image disappears

see if the

on its own.

POWERSAVING PICTURE MODE Plasma
TVOnly
It reduces the plasma display's

power consumption.

The default factory setting complies
level to be viewed at home.

with the Energy

You can increase the brightness

screen by adjusting the Power

ofyour

Star

requirements

Saving

and is adjusted

to the comfortable

level or by setting the Picture

Mode.

c
_D
r_

Select Power

Saving.

Select Level 0, Level I,
Level 2, Level 3, or Level 4.

Return to the previous menu.
010r_
Level 0 is the brightest.
01_
Level 0 > Level 1 > Level 2 > Level 3 >
Return to TV viewing.

Level 4
0101_
You can also adjust
the Q. Menu.

Power

Saving

SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER(AUTO VOLUME)
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a
regular TV program.

0
C

Select AUDIO.

z
C
1-11

Select Auto

Volume.

0
z
.-I

Select On or Off.

Return to the previous menu.

Return to TV viewing.

PRESETSOUND SETTINGS (SOUND MODE)
Sound Mode
sound

lets you

options

Standard,

enjoy the best sound

based on the program

Music,

Cinema,

without

any special

adjustment

as the TV sets the appropriate

content.

Sport,

and Game

are preset for optimum

sound

quality

at the factory

and are

not adjustable.

0
c
Z
_o
z
c

Select AUDIO.

l'rl

Select Sound

Mode.
f_l_
You can also adjust Sound
the Q. Menu.

Select Standard,
Cinema,

Sport,

Mode

N
0
Z
.-I
0

Music,
or Game.

Return to the previous menu.

Return to TV viewing.

SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT- USERMODE
Adjust

the sound

to suit your taste and room situations.

Select AUDIO.
Make appropriate

Select Sound

Mode.
Return to the previous menu.

O
c
Z
_o

adjustments.

Select Standard,
Cinema,

Music,

Sport,

Return to TV viewing.

or Game.

z
c

Select Treble

or Bass.

l'rl

N
0
Z
.-I
0

SRS TRUSURROUND XT
Select AUDIO.

Select SRS TruSurround

Select On or Off.

SRS

TruSurround

any multi-channel

Return to the previous menu.

XT: Takes advantage
format

without

needing

of
to

add extra speakers or equipment. Dialog clarity,
bass enrichment,
and the addition of stereo
audio

enhancement

produces

an immersive

sound experience from standard stereo material.
Return to TV viewing.

CLEAR VOICE
By differentiating

the human sound

range from

others,

it improves

the sound

quality

of voices.

0
c
Z

Select AUDIO.

Select Clear

Voice.
z
c

Select 0 n or Off.

l'rl

N
0
Z
.-I
Return to the previous menu.

0_If you select
TruSurround

"Clear
Voice-On':
SRS
XT feature
will not

work.
Return to TV viewing.

0_0_
You can also adjust Clear
Q-Menu.

Voice

in the

SOUND & LANGUAGE CONTROL
BALANCE
Adjust

0
c
Z

the left/right

sound

of speaker to suit your taste and room situations.

Select AUDIO.

_o
z

Select Balance.

c
l'rl

N
0
Z
.-I
0

Make appropriate

Return to the previous menu.

Return to TV viewing.

adjustments.

TV SPEAKERSONIOFF SETUP
Turn the TV speakers

off if using external

audio

equipment.

0
c
Z
_o
Select AUDIO.
z
c
Select TV Speaker.
l'rl

Select 0 n or Off.

N
0
Z
.-I
0

Return to the previous menu.

Return to TV viewing.

SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings

of the selected

Sound Mode return

0
c
Z

Select AUDIO.
z
c
Select Reset.
l'rl

N
0
Z
.-I

Initialize

the adjusted value.

Return to TV viewing.

to the default

factory

settings.

STEREO/SAPBROADCASTSETUP
For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically
used
if the broadcast

is only in Mono.

Plasma TV

LCD TV

0
c
Z
_o
z

Analog TV

Digital TV

c
l'rl

Select SAP.

Select Mono,

Stereo,

Select Multi

Audio.

N
0
Z
.-I
0

or SAP.
Select other languages.

Return to TV viewing.
Return to TV viewing.

SOUND & LANGUAGE CONTROL
AUDIO LANGUAGE
Other

languages may be available if a digital signal is provided

This feature

operates

only in DTV/CADTV

0
c
Z
_o

Select OPTION.
z
c
l'rl

N
0
Z
.-I

Select Language.

Select Audio.

Select your desired language:
English, Spanish, or French

Return to the previous menu.

Return to TV viewing.

mode.

by the broadcasting

station.

ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected

language.

0
c
Z
Select OPTION.
z
c

Select Language.

l'rl

N
0
Z
.-I

Select Menu.

0
Select your desired language.
From this point on, the on-screen

menus

will be shown in the selected language.

Return to the previous menu.

Return to TV viewing.

SOUND & LANGUAGE CONTROL
CAPTION MODE
Analog
Caption
tioning

Broadcasting
must be provided

information

to help people with hearing

if provided

and is usually the program's
digital

System Captions
on a program.
dialog.

Caption/Text,

and analog channels on the Antenna/Cable.

which was last set when you turned

loss watch TV. Select a caption

Analog caption
if provided

displays

information

by the broadcaster,

This TV is programmed

the power off. This function

mode for displaying

at any position
would

to memorize

be available

for both

the caption/text

is only available when Caption

cap-

on the screen
mode

Mode is set On.

0
c
Z
_o

Select OPTION.

z
c

Off,

Sub-menus

The

Select 0 n.

term

for

the

across

the

usually

the audio

words

bottom

gram provided

that

of the
portion

scroll

TV screen;
of the pro-

for the hearing impaired.

TEXT

Select CC1-4

or Text1-4.

The term for the words that appear
large black frame and almost
entire screen; usually
ed by the broadcaster.

Return to the previous menu.

Return to TV viewing.

for

CAPTION

Select Caption.
l'rl

N
0
Z
.-I

When selecting

Analog, DTV, and Digital Option
become disabled.

in a

cover the

messages provid-

Digital
Choose
Other

Broadcasting
the language

System Captions

you want the DTV/CADTV

Languages can be chosen for digital

This function

in only available

when Caption

Captions

to appear

in.

sources only if they are included on the program.
Mode is set On.

iiiiiMi/i!iiiiiiiiMi!lliii//i!iiiii
_i_ii!_iii_iiiiii!iiiiiiiiiiiiiiiiiiiiii_i_i!i!ii_iii_iiiiYii!iii_ii_iiiiii_i:_:i!iiiiiii!!iiiii!_i_iiiiii!i!i!_
¸iii!

0
c
z
t:3

Select OPTION.

Select Caption.

z
c

Select 0 n.

Select CC1-4, Text1-4,
Service1 - 6.

l'rl

N
0
Z
.-I
0

Return to the previous menu.

Return to TV viewing.

SOUND & LANGUAGE CONTROL

Caption Option
Customize

the DTV/CADTV

This function

O
c
Z
_o

captions

in only available

that

appear

when Caption

on your

Mode is set On.

Select OPTION.
01_
Size:
Select Caption

01_
Font:

Select a typeface

0_Text

Color:

Select Digital

01_
Bg (Background)
background color.

Option.

for the text.
a color for the

Color:

Select a

01_
Bg (Background)
Opacity:
the opacity for the background

0
Select Custom.

0101_
Edge

Type:

0101_
Edge

Color:

edges.
Customize
preference.
the bottom
caption

the Style,

Font,

etc., to your

A preview icon is provided at
of the screen, use it to see the

language.

Return to the previous menu.

Return to TV viewing.

100

Choose

01_
Text Opacity:
Specify the opacity
for the text color.

Select O n.

l'rl

N
0
Z
.-I

Set the word size.

text.

z
c

screen.

Select
color.

Select an edge type.
Select a color for the

TIME SETTING
CLOCK SETTING
Auto Clock Setup
The time is set automatically
The digital

channel

signal

Set the clock manually

from a digital
includes

if the current

channel

information

signal.

for the current

time is set incorrectly

time provided

by the broadcasting

station.

by the auto clock function.

Select TIME.

Select Clock.

Select Auto.

Select your viewing area time zone.
• U.S.A: Eastern,
Central,
Pacific, Alaska, or Hawaii.

Mountain,

• Canada: Eastern, Central,
Mountain,
Pacific, New F.land, or Atlantic.
Select

Auto,

Off,

whether

or not your

Daylight

Saving time).

or On
viewing

(depending

area observes

Return to the previous menu.

Return to TV viewing.

101

TIME SETTING

Manual Clock Setup
If the current

time setting is wrong, set the clock manually.

Select TIME.

Select Clock.
m
m

Select Manual.

z
Select the Year, Month, Date, Hour, or Minutes
option.

Set the Year, Month,

Date, Hour, or Minutes

option.

Return to the previous menu.

Return to TV viewing.

102

AUTO ON/OFF TIME SETTING
This function
The Off

Time

operates

only if the current

function

overrides

The TV must be in standby

time has been set.

the On

Time

mode for the On

If you do not press any button

within

automatically

mode.

revert to standby

function

Time

if they are both set to the same time.

to work.

2 hours after the TV turns

on with the On

01_
To cancel On/Off

Select TIME.

Time

function,

the TV will

select Off.

i_f_Only for On Time function

Select Off

time

or On time.

Select Input.

r_
r_

Select Repeat.

Select Off,

Once,

Mon~Sat,

Weekend,

Select the desired input source.

Everyday,

Mon~Fri,

or Sunday.

Select and set Hour

or Minute.

When Selecting

z
c_

TV:

set the channel at turn-on.

Adjust to sound level at
turn-on.

Return to the previous menu.

Return to TV viewing.

103

TIME SETTING
SLEEPTIMER SETTING
The Sleep Timer turns
Note

that this setting

the TV off at the preset time.
is cleared when the TV is turned

off.

Select TIME.

Select Sleep

Timer.

Select Off, 1 O, 2 O, 3 O, 6 O, 9 O,
120, 180, or 240 minutes.

Return to the previous menu.

Return to TV viewing.

104

,I,_You can also adjust Sleep
the Q-Menu.

Timer

AUTO SHUT-OFF SETTING
TV will be automatically

turned

off, in case of no signal for 10 minutes.

Select TIME.

Select Auto

Sleep.

Select 0 n or Off.
m
m

Return to the previous menu.

Return to TV viewing.

105

PARENTALCONTROL / RATINGS
Parental

Control

can be used to block specific

channels,

ratings and other

viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the
type of the program and the categories.
this function,

the following

It is also possible to block all program viewing for a time period. To use

must be done :

1. Set ratings and categories

to be blocked.

2. Specify a password
3. Enable the lock

V-Chip rating and categories
Rating guidelines are provided
blocked

by broadcasting

by TV Rating and/or

stations. Most television

Individual Categories.

programs and television

Movies that have been shown at the theaters

movies can be
or direct-to-

video movies use the Movie Rating System (MPAA) only.

Ratings for Television programs including

made-for-TV

movies-

0,_
TV-G

0,_TV-MA

(Mature

audience only)

0_TV-Y

(All children)

0fu_
TV-Y7

(Children

(General audience)

0_TV-PG (Parental guidance
0fu_
TV-14

suggested)

(Parents strongly cautioned)

7 years older)

SET PASSWORD& LOCK SYSTEM
Setting up Your Password
r_l

Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required

N
O
z

to gain access to this menu.

For USA

For Canada

z
Ch

Select LOCK.

01_
Enter the password as requested.
01_
The TV is set up with the initial password "0-0-0-0".

Input the password.

106

Lock System
Enables or disables the blocking

scheme you set up previously.

Select LOCK.

Input the password.

Select Lock

System.
_o
m

z
Select 0 n or Off.

Return to the previous menu.

01_
When you select 0 n, the Lock System
is enable.

N
©
z
_o

Return to TV viewing.
z

107

PARENTALCONTROL / RATINGS

Set Password
Change the password

by inputting

a new password

twice.

i¸I¸I
¸I¸pli
¸Hiii
_i_iiiiiiii!iiiHii!iiiiiiii_iiii_i!iii!iiiii!iiiii1iii!ji_iiiIiiiiiiiii_!_iiiiiiiiii!ii
_iiiii!ii_i{ii_:_iiiH_iii!iiiii_ii_ii!iiiii_i_iiiiiiiIIIi_:_ii_iiiiiiIiiIiiii_iiii

Select LOCK.

Input the password.

Select Set

password.

z
Choose any 4 digits for your new password.
N
0
z
0

As soon as the 4 digits

the same 4 digits on the Confirm.

Return to the previous menu.

Return to TV viewing.
z
Ch

108

are entered,

re-enter

CHANNEL BLOCKING
Blocks any channels that you do not want to watch or that you do not want your children

Block/Unblock

Move

Page

to watch.

:_TO_N*

Exit

Select LOCK.

Input the password.

Select Block

Channel.
m

z
Select a channel to block or unblock.
N
0
z
Block or unblock a channel.
0

Return to the previous menu.
z
Return to TV viewing.

109

PARENTALCONTROL / RATINGS
MOVIE & TV RATING
Movie Rating (MPAA)

- For USA only

Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can
set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that
the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.

Select LOCK.

01_
G (General audience)
Input the password.

01_
PG (Parental guidance
01_
PG-13 (Parents strongly

rrl

Select Movie

Rating.

Select G, PG, PG-1 3, R, NC-1 7,
X, or Blocking Off.

z
c_

110

Return to TV viewing.

cautioned)

01_
R (Restricted)
01_
NC-17
01_
X (Adult

N
©
z

suggested)

(No one 17 and under admitted)
only)

01_
Blocking Off (Permits all programs)
If you set PG-1S: G and PG movies will
be available, PG-1S, R, NC-17 and X will
be blocked.

TV Rating Children
Prevents children

- For USA only

from watching

rating does not apply to other

certain

children's

TV programs.

ences in the TV Rating - sub menu, your

TV programs,

Unless you block

children

can view those

according
certain

to the ratings limit set. The children

TV programs

intended

for mature

audi-

programs.

Se,ect
LOC..
Input the password.

Select TV Rating-Children.

z
01_
Age (applies to TV-Y, TV-Y7)
Select Age or Fantasy

Violence.

Fantasy Violence

(applies to TV-Y7)

N
©
z
_o

Return to the previous menu.

z
C_

Return to TV viewing.

111

PARENTALCONTROL / RATINGS

TV Rating General - ForUSAonly
Based on the ratings,

blocks certain

TV programs

that you and your

family

do not want to view.

Select LOCK.

Input the password.

Select TV Rating-General.
_D
m

z
,i_Age (applies
N
O
z

Select Age, Dialogue,
Sex or Violence.

Language,

to TV-G,TV-PG,TV-14,TV-

MA).
,l_Dialogue-sexual

dialogue

(applies to

language

(applies to

TV-PG,TV- 14).

,l_Language-adult

O
Select block options.

TV-PG, TV-14, TV-MA).

,l_Sex-sexual situations

,i,l_Violence

(applies to TV-PG,

TV-14, TV-MA).
Return to the previous menu.

MA).

Return to TV viewing.

112

(applies to TV-PG, TV-14, TV-

TV Rating English - For CANADA
Selecting

!\i,__

canadian

english language

only

rating system.

Select LOCK.
01_
E (Exempt)

Input the password.

01_
C (Children)
01_
C8+

(Children

eight years and older)

01_
G (General programming,

Select TV Rating-English.

suitable for

all audiences)
0101_
PG (Parental Guidance)

Select E, C, C8+, G, PG, 1 4+,

0101_
14+ (Viewers 14 years and older)

1 8+, or Blocking

0101_
18+ (Adult

Off.

0101_
Blocking

Return to the previous menu.

programming)

Off (Permits all programs)

_D
rT1

N
O
z
_D

Return to TV viewing.
z

113

PARENTALCONTROL / RATINGS

TV Rating French - ForCANADA
Selecting

canadian

french

language

only

rating system.

Select LOCK.

0,_E (Exempt)
Input the password.

0,_G (General)
01_
8ans+

(General-Not

convenient

for lit-

tle children)

Select TV Rating-French.

01_13ans+ (Not convenient

t"t3

01_16ans+ (Not convenient

Select E, G, 8ans+, 1 3ans+,
1 6ans+,

1 8ans+, or Blocking

114

(This

programs

only

adults)
Return to the previous menu.

Return to TV viewing.
z
c_

off.

for children of

16 years and younger)
01_18ans+

0
z
0

for children of

13 years and younger)

_f_Blocking off (Permits all programs)

for

DOWNLOADABLE RATING
This function

may become

available

in the future

and will be available

This function

operates only when TV has received Regions

only for digital

channels.

Rating data.

Based on rating table, your TV's OSD
(On Screen Display) may differ slightly
from what is shown in this manual.

Select LOCK.
m

z
Input

the password.
N
O
z

Select Downloadable

Rating.
O

Select desired Downloadable
Rating

option.

Select desired option

z
c_
and block it.

Return to the previous menu.

Return to TV viewing.

11S

PARENTALCONTROL / RATINGS
EXTERNAL INPUT BLOCKING
Enables you to block an input.

iii!iii!i_iii_ii_iiiiiiiiiiiiiiiiiiiiiiiiiiili

!_:!_:!_iHi_i_!_i_i_i_i_i_iii_i_
i_ii_ii_i_,i_ii_!:_iiiiiiiiiiiiiiiiiii!ii!:

32LG20,
32/37/42LG30,
37/42/47/52LG50,
32LG70

Select LOCK.

Input the password.

Select Input

Block.

O
z

Select input source.

Select On or Off.

Return to the previous menu.

Return to TV viewing.

116

Plasma TV, 42/47/52LG70,
47LG90

32/37/42/47/52LG60,
42/47LGX

KEY LOCK
The TV can be set up so that it can only be used with the remote
This feature

can be used to prevent

This TV is programmed

to remember

unauthorized
which option

control.

viewing by locking

out the front

panel controls.

it was last set to even if you turn the TV off.

Select OPTION.

Select Key Lock
0_In Key

Lock

'On',

if the TV is turned

off, press the dD/ I, INPUT, CH (AT
Select O n or Off.

^ v ) button on the TV or POWER,
INPUT, CH ^ v or NUMBER buttons
on the remote control.
01_
With the Key

Return to the previous menu.

Key

Lock

Lock'

if any button

On, the display

appears on the screen

on the front

rT1

panel is

pressed while viewing the TV.
Return to TV viewing.
z
Cl

117

APPENDIX
TROUBLESHOOTING

mml
Check to see if there is any object between the product
causing obstruction.

and the remote control

Ensure you are pointing the remote control

Ensure that the batteries are installed with correct
Ensure that the correct

remote operating

polarity

directly at the TV.

(+ to +, - to -).

mode is set: TV, VCR etc.

Install new batteries.

Is the sleep timer set?
Check the power control

Check whether

settings.

the product

is turned

Try another channel. The problem
Is the power cord inserted
Check your antenna

on.

may be with the broadcast.

into wall power outlet?

direction

Test the wall power outlet,
where the product's

Power interrupted.

and/or

location.

plug another

product's

power cord was plugged

power cord into the outlet

in.

This is normal, the image is muted during the product
contact

your service center, if the picture

startup

has not appeared

process. Please

after five minutes.

Adjust Color in menu option.
Keep a sufficient

distance

between the product

Try another channel. The problem
Are the video cables installed
m

z
c7
x

Activate

any function

properly?

such as an electrical

Station

or cable product

Station

experiencing

signal is weak, reorient

Check for sources of possible

Check antenna

may be with the broadcast.

to restore the brightness

Check for local interference

and the VCR.

problems,

of the picture.

appliance

or power tool.

tune to another

station.

antenna to receive weaker station.
interference.

(Change the direction

of the antenna).

Check HDMI cable over version 1.3.
The HDMI cables don't

support

HDMI version 1.3, it cause flickers or no screen

display. In this case use the latest cables that support

118

HDMI version

1.3.

mm_
Press the VOL or VOLUME button.
mini
Sound muted? Press MUTE button.
mini
Try another

channel. The problem

mini
Are the audio cables installed

may be with the broadcast.

properly?

mini
Adjust Balance in menu option.

mmff
A change in ambient
when the product

humidity

is turned

or temperature

may result in an unusual noise

on or off and does not indicate a fault with the

product.

mini
Check HDMI cable over version 1.3.
mini
Check USB cable over version 2.0.
m_Use normal MP3 file.

Adjust resolution,

*This feature is not available for all models.

horizontal

frequency,

or vertical frequency.
m

Check the input source.

z
x

Work the Auto configure

or adjust clock, phase, or H/V position.

(Option)

119

APPENDIX
MAINTENANCE
Early malfunctions
enjoy your
Caution:

Careful

and regular

cleaning

Be sure to turn the power off and unplug the power

Cleaning

can be prevented.

can extend the amount

of time you can

new TV.
cord before you begin any cleaning.

the Screen

Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener

or dish washing detergent.

Wring the cloth until it's almost dry, and then

use it to wipe the screen.

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning

the Cabinet

,,,,,To remove dirt or dust, wipe the cabinet

with a soft, dry, lint-free

cloth.

,,,,,Please be sure not to use a wet cloth.

Extended Absence
,',',',',,,,
CAUTION
IIII,,_
If you expect to leave your TV dormant for a long time (such as a vacation), it's a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.

z
x

120

PRODUCT SPECIFICATIONS

Dimensions

With stand

(Width x Height
x Depth)

Without

Weight

With stand
Without stand

Dimensions

stand

31.5 x 23.7 x 8.9 inches

36.2 x 26,8 x l1.5 inches

801.8 x 604.2 x 22Z3 mm

919.6 x 682,3 x 293.8 mm

1032,8x 742.3 x 293.8 mm

31.5 x 21.4 x 3.1 inches

36.2 x 24,0 x 3.5 inches

40.6 x 26.3 x 3.6 inches

801.8 x 544.1 x 79.0 mm

919.6 x 610.3 x 89.0 mm

1032.8x 670.1 x 92.0 mm

29,5 pounds / 13,4 kg

41.4 pounds / 18.8 kg

52.0 pounds ,' 23.6 kg

26.2 pounds/

35.7 pounds / 16.2 kg

46.2 pounds / 21.0 kg

l1.9 kg

31,5x23.7x8.91nches

With stand

40.6 x 29.2 x l1.5 inches

36.8x26.9xH.51nches

40.7x28.9xH.51nches

801.8 x 604.2 x 22Z3 mm 936.4 x 685.4 x 293.4 mm 1034.0 x 735.0 x 294.0 mm
(Width x Height
x Depth)

Without

Weight

With stand
Without stand

Dimensions

stand

31.5 x 21.4 x 3.1 inches
801.8x544.1

36.8 x 24.1 x 3.4 inches

x79.0mm

936.4x612.8x88.0mm

29,5 pounds / 13,4 kg

40.3 pounds ,' 18.3 kg

54.0 pounds ,' 24.5 kg

26.2 pounds/H

34.3 pounds / 15.6 kg

48.5 pounds / 22.0 kg

.9 kg

45.5 x 32.0 x 13.5 inches

With stand

1156.2 x 813.1 x 342.9
(Width x Height
x Depth)

Weight

Without

stand

45.5 x 29.1

50.8 x 35.1 x 13.5 inches

1291.7 x 892.2

x 4.0 inches

With stand
Without stand

64.3 pounds

/ 29.2

1291.7 x 81Z0 x 115.3 mm

8Z0 pounds / 39.5 kg

54.2 pounds / 24.6 kg

76.9 pounds / 34.9 kg

AC100-240VNTSC-M,

Television System
VHF 2-13,

Program Coverage

x 342.9

50.8 x 32.1 x 4.5 inches

1156.2 x 739.2 x 103.0 mm

Power requirement

UHF 14-69,

50/60Hz
Z

ATSC, 64 & 256 QAM
CATV 1-135, DTV 2-69,

CADTV 1 -135

75 ohm

External Antenna Impedance

Environment

40.7 x 26.1 x 3.5 inches
1034.0x663.0x9].0mm

Operating

Temperature

Operating

Humidity

32-

104 F(0_40C)
Less than 80%

condition
Storage Temperature
Storage Humidity

,,,,,,
The specifications

shown above may be changed without

-4 _ 140 F (-20 _ 60 C)
Less than 85%

prior notice for quality improvement.

121

APPENDIX

Dimensions

With stand

(Width x Height
x Depth)

Weight

Dimensions

Without

stand

With stand
Without stand

31.7 x 24.6 x 13.l inches

36.5 x 2Z8 x 14.7 inches

805.6 x 626.0 x 333.0mm

929.0 x 706.9 x 374.7 mm

103Z8 x 796.4 x 379.5 mm

31.7 x 23.1 x 3.7 inches

36.5 x26.1 x 3.8 inches

40.8 x 29.4 x 3.1 inches

805,6 x 58Z4 x 96.2 mm

929,0 x 665,0 x 98,7 rnrn

103Z8 x 747,0x 80.8 mm

31.7 pounds / 14.4 kg

46.7 pounds ,' 21.2 kg

53.1 pounds ,' 24.1 kg

26.8 pounds/

39.9 pounds ,' 18.1 kg

44.9 pounds ,' 20.4 kg

12.2 kg

40.8 x 31.4 x 14.8 inches

With stand

45.3 x 34.1 x 1Z1 inches

103Z8 x 798.0 x378.0 mm 1152.8 x 868.6 x 434.5 mm
(Width x Height
x Depth)

Without

Weight

With stand
Without stand

Dimensions

stand

With stand

(Width x Height
x Depth)

Weight

Dimensions

Z
E_

40.8 x 29.3 x 1.7 inches

45.3 x 32,3 x 3,1 inches

50.3 x 35,2 x 3.5 inches

103Z8 x 746,2 x 45.0 mm

1152,8 x 820,8 x 79.0 mm

1280,1 x 896,0 x 89.0 mm

46.9 pounds / 21.3 kg

71.8 pounds / 32.6 kg

99.2 pounds / 45.0 kg

39.6 pounds / 18.0 kg

59.3 pounds / 26.9 kg

83.9 pounds / 38.1 kg

44.5 x 33,6 x 16.2 inches

31.3 x 23,5 x 8.9 inches

40.4 x 28.8 x 11.5 inches

1132.0 x 853.8 x 413.5 mm

79Z0 x 59Z0 x 22Z3 mm

1026.2 x 734.0 x 293.4 mm

44.5 x 31,8 x 1,7 inches

31.3 x 21.9 x 3,9 inches
79Z0 x 558.6 x 100.4 mm

With stand

61.7 pounds / 28.0 kg

29.1 pounds ,' 13.2 kg

49.5 pounds / 22.4 kg

Without

52.9 pounds / 24.0 kg

25.7 pounds ,' 11.7 kg

43.4 pounds / 19.7 kg

44.8 x 32,2 x 13.5 inches

50.5 x 35,3 x 13.5 inches

44.8 x 32,2 x 13.5 inches

stand

With stand

1140,4 x 820,1 x 342,9
Without

stand

Weight

With stand
Without stand

50,5 x 33,2 x 5,0 inches

8Z9 pounds / 39.9 kg

66.5 pounds ,' 30.2 kg

55.9 pounds / 25.4 kg

7Z6 pounds / 35.2 kg

56.2 pounds / 25.5 kg

AC100-240VNTSC-M,
VHF 2-13,

Program Coverage

UHF 14-69,

Temperature
Humidity

Storage Temperature
Storage Humidity

122

50/60Hz

ATSC, 64 & 256 QAM
CATV 1 -135, DTV 2-69,
75 ohm

External Antenna Impedance

Operating

44.8 x 30.1 x 5.0 inches

66.3 pounds / 30.1 kg

Television System

Operating

1140,4 x 764,8 x 129,0 mm 1284,4 x 844,6 x 129,5 mm 1140,4 x 764,8 x 129,0 mm

Power requirement

The specifications

40,4 x 2ZO x 4.4 inches
1026.2 x 68Z9 x Ill.8

mm 1284,4 x 898,6 x 342,9 mm 1140,4 x 820,1 x 342,9

44.8 x 30.1 x 5.0 inches

x Depth)

Environment
condition

50.3 x 3Z1 x 16.9 inches
1280.1 x 944.7 x 430,0 mm

1132,0 x 80Z8 x 44.7 mm

Without

(Width x Height
m

40.8 x 31.3 x 14.9 inches

shown above may be changed without

32-

104 F(0_40C)
Less than 80%

-4 _ 140 F (-20 _ 60 C)
Less than 85%

prior notice for quality improvement.

CADTV 1 -135

Dimensions

41.1 x 28.9 x 12.1 inches

With stand

1044.4

(Width x Height
x Depth)

Without

stand

x 735.4 x 308.0

Dimensions
(Width x Height
x Depth)

Weight

1235.6 x 849.3

41.1 x 26.7 x 3.1 inches
1044.4 x 680.6

Weight

48.6 x 33.4 x 14.3 inches

x 79.6 mm

61.7 pounds / 28.0 kg

96.3

Without

55.1 pounds / 25.0 kg

8Z5 pounds / 39.7

stand

With stand

48.6 x 33.4 x 14.3 inches
1235.6 x 849.3 x 364.1

Without

stand

pounds / 43.7 kg

1455.0 x 985.0

x 414.0 mm

5Z3 x 36.4 x 3.3 inches

x 79.6 mm

1455.0 x 924.8

x 84.1 mm

With stand

100.7 pounds / 45.7 kg

13Z5 pounds / 62.4 kg

Without

91.9 pounds / 41.7 kg

121.0 pounds

stand

AC100-240V-

/ 54.9 kg

50/60Hz

Television System

NTSC-M, ATSC, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69,

CADTV

1 -135

75 ohm

External Antenna Impedance
Operating

Temperature

Operating

Humidity

Storage Temperature
Storage Humidity

,,,,,The specifications

5Z3 x 38.8 x 16.3 inches

48.6 x 31.2 x 3.1 inches
1235.6 x 792.8

1235.6 x 792.8 x 79.6 mm

With stand

Power requirement

Environment
condition

x 364.1

48.6 x 31.2 x 3.1 inches

shown above may be changed without

32-

104 F(0_40C)
Less than 80%

-4 _ 140 F (-20 _ 60 C)
Less than 85%

prior notice for quality improvement.

Z
X

123

PROGRAMMING THE REMOTE CONTROL
The provided

universal remote control

Note that the remote may not control

Programming

can be programmed

to operate most remote-controllable

devices.

all models of other brands.

a code into a remote mode

Testing your remote control.
To find out whether
component

your

remote

control

can operate other

such as a STB and press the corresponding

trol, while pointing

at the component.

responds

If the component

correctly.

components

mode button

Test the POWER

and CH ^

does not operate correctly,

without

programming,

(such as a STB)
v buttons

turn

on a

on the remote con-

to see if the component

the remote control

requires

programming

to operate the device.

Turn on the component to be programmed, then press the corresponding mode button (such as STB) on
the remote control. The remote control button of the desired device is illuminated.

Press the MENU
the code.

and MUTE

buttons simultaneously,

124

with

button to store the code.

Test the remote control functions
z

is ready to be programmed

Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding
component can be found on the following pages. If the code is correct, the device will turn
off.

Press the MENU

r_l

and the remote control

to see if the component

responds

correctly.

If not, repeat from step 2.

Remote Control

Code

VCR

_IWA

034

031

033

067

068

012

031

034

041

032

040

102

104

105

107

109

112

113

115

120

122

022

043

048

135

003

007

010

014

_,!!_:::_r i_'_
_£__'_i
_'_'_
_'_i_i_!_z_,i_
_ __:,_,_,_
_z_'_,',_,_
_,,i_

AKAI

016

043

125

146

046

124
MARANTZ

072
ANAM

BROKSONIC

....

031

033

103

012

023

039

037

129

065

108

110

111

112

116

117

119

035

DAYTRON

033

067

069

125

101
043

MATSUI
iiiii!i i

_i!iii!ill

iii

iii!i! !iiiiiiii i

SANSUI

027

030

031

033

049

051

102

059

061

SHARP

012

023

034

053

039

043

MTC

024

059

NEC

006

017

034

025

027

012

054 149

024
i

DYNATECH

031

151

108

134

040

.............

iiiii

ii_iiiiii_
iii!_il _ii!iii!ilili

!!!i

SONY

003

034
023

056
039

043

077

048

009

031

057

058 076

052

078

149

033

034

034
STS

013
031

066

070

074

133

140

145

013

020

031

083

059

067
SYMPHONIC

034

010 o34

COWDFO

031

033

063

072

107

109

144

147

PENTA×

_32_36

033

TATUNG

039

043

063

034

039

031 O34O67

031 O33O7O
019
THOMAS

031 033
CL

iiiiiiiiiil

_ENSEN

LLOYD

iiiiiiii

P_ONFFR

031

033

012

013

015

040

066

101

013021048

PULSAR

ii_

QUASAR

!!!! ii_ !:

!ii

TOSHIBA

072
014

043

033

"O
"O
m

034

TOTEVISION

033 066 07S _4S

008

013

042

047

059

082

112

131

040

101

013020033034 VFCTORRFS_ARC.
012

048

050

055

040

041

062

063

130

150

152

107

109

140

144

014

034039

145

147

047

048

003

008

043
REALISTIC

010

014

03i 033034040

101

053

106

114

123

054

048
VIDFOCONCFPTS

WARDS

009

013

014

017

034

101

106

RUNCO

148
014

003

03i

101

058

003

012

034

046

040

001 012 013 020
034

040

01R031033043
060

034

101

006

108
033

031

043

ZENITH

013

017

024

033034 040
053

054

131

012

034

039

034

048

056

058

072

043

080

040
125

HDSTB

AL,PHASTARDSR

123

HOUSTON TRACKER 033

037

AMPLICA

050

057

104

BIRDVlEW

051

126

129

CHANNEL MASTER 013
036

014
055

015

018

CHAPARRAL.

008

009

012

077

CITOH

054

CURTIS MATHES

050

145

DRAKE

005

006

007

010

LUTRON

132

011

052

112

116

L,UXOR

062

144

MACOM

010

059

141

068

JANIEL

060
061

051

147

PROSAT

072

RCA

066

106

REALISTIC

043

074

SAMSUNG
123
SATELUTESERVtCECO
028

035

047

085

LEGEND

057

SCIENTIFICATLANTA 032

001

SON_

103

STARCAST

041

SUPER GUIDE

020

124

125

TEECOM

023

026

075

087

065

088

090

107

130

137

024

046

056

076

ECHOSTAR

038

040

057

058

MEMORE×

057

093

094

095

096

NEXTWAVE

028

124

097

098

099

100

NORSAT

069

070

063

125

064

138

TOSHIBA

002

127

UNIDEN

016

025

042

043

044

045

048

049

078

079

080

086

101

135 136

122

PACESKY SATELLITE 143

ELECTRO HOME

089

PANASONIC

060

EUROPLUS

114

PANSAT

121

FUJITSU

017
133

021
134

022

027

PERSONAL. CABLE 117
PHILIPS
071

VIEWSTAR
WINEGARD

115
128

146

GENERALINSTRUMEN_
003

004

016

029

PICO

105

ZENITH

081

082

051

059

101

PRESIDENT

019

102

091

120

139

140

PRIMESTAR

030

110

005

006

011

015

142

083

111

DVD

"O
"O

Z
C7
022

l'di

i_!_i_ii!_!!_ii_ili_iiiiiii_i_iill
i_!_iii_!iiiilil;ili#_ii_ii!iii!]!i_ili!_iiiiii_i_!_!!i!i!iil
i_il
_ii_i_::::::!_!_i_iii_!i
IIIIiii_i!iii_!_#_ii!!iiiii_i_ilJi
III
_iliiiiii_i

DENON

014

005

006

HARMAN KARDON

NAD

027

PANASONIC

o12
L'G

001

126

024

002
023

SAMSUNG

008

017

003

009

007
THOMPSON

o13
010

016

025

PIONEER

o13
MARANTZ

iii'ii'i_iii'i_i_iiii!!i_!_iiiii'ii'ii'_!i!iii_i
_#ii!#ili_i_ii_i_i_ii_i_ii!ilJii_!i,i
_,ii_ii!i_i_iS!_i!!ii
_!i_!_!!_!!_#i!i
IIi:i_i_!_!!_!i_!i!ill
_i_iii_i!i_ii_i!#i_i!!_]_!#ii!i!i!!iiii!

020

057

108

DXANTENNA

HITACH

HUGHES

039

004

005

006

o19oo8
026

o21
PROSCAN

005

YAMAHA

N
006

009

018

010 016 02S

084

IR CODES
1. How to Connect
01_
Connect

your wired remote control

2. Remote Control
0_Output

to the Remote Control

port on the TV.

IR Codes

waveform

Single pulse, modulated with 37917KHz signal at 455KHz
L
I-

Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3

0_Configuration
1 st frame

of frame

Low

custom

code

High

custom

Data

code

Data

code

Repeat frame

m
Repeat

code

0_Lead code

9 ms

J
4.5

0_Repeat code

-0
-0
m

z
0.55

L_J-I

9 ms

0_Bit description
Bit "0"

I
-I

O.56ms

]

1.12ms

01_
Frame interval:

2.24

The waveform is transmitted as long as a key is depressed.
Tf

r-ll

[-11 T,=,O_ms
_.SS..z
127

POWER OFF

Discrete IR Code
(Only Power Off)

AV2

Discrete IR Code
(AV2 Input Selection)

COMPONENT2

Discrete IR Code
(Component2

Z
C7
X

Remote control

Button

ENTE R

Remote Cont rol Button

RETURN

Remote control

Button

SIMPLINK

Remote €ontrol

Button

Av MODE

Remote control

Button

PLAY

Remote Control Button

PAUSE

Remote control

Button

REC

Remote control

Button

REW
FF

HDMI1

Discrete IR Code
(H DMI1 In put Selection )

Discrete IR Code
(HDMI2
HDMI5

Ratio 4:3

input selection)

Discrete IR Code
(HDMI3

Remote Control Button
Remote control

Input Selection)

Discrete IR Code
(Only 4:5 Mode)

Button

Ratio Zoom

Discrete IR Code
(Only Zoom1

* Use this feature depending

128

on your model.

Input Selection)

Mode)

EXTERNALCONTROLTHROUGHRS-232C
- Except 32/37/42/47/52LG60,
The RS-232C

port

42/47LGX

allows you connect the RS-232C

or an #u/V control

system)

01_
Note: RS-232C

on this unit is intended

The instructions
software.

to control

below are provided

input jack to an external control

the TV's functions

device (such as a computer

externally.

to be used with third

to help with programming

party

RS-232C

software

control

hardware

or to test functionality

and software.
using telenet

RS-232C Setup
i.e)

Type of Connector;

D-Sub 9-Pin Male

Communication
01_
Baud rate : 9600

Parameters
bps (UART)

01_
Data length : 8 bits
No connection

01_
Parity : None

RXD (Receive data)

01_
Stop bit : 1 bit

TXD (Transmit

01_
Communication

data)

DTR (DTE side ready)

code : ASCII code

01_
Use a crossed (reverse) cable.

z
c7
x

GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection

@
1 29

RS-232C Configurations
Either cable below can be used.

RXD

TXD

RXD

TXD

RXD

GND

DTR

DSR

DTR

DSR

DTR

DSR

RTS

CTS

RTS

CTS

RTS

CTS

D-Sub 9

Set ID
Use this function

to specify

Refer to 'Real Data Mapping1

a TV ID number.
'. _ p.133.

-O
-O
m

Select OPTION.

Select Set ID.

Choose the desired TV ID number.
The adjustment
1 -99.

range of Set ID is

Return to the previous menu.

Return to TV viewing.

130

RXD

TXD

D-Sub 9

Command

Reference

01 Power

02. Input Select

04.Screen

List

Mute

O0 - 01

(_ p.132)

15. Bass

(_ p.132)

O0 ~ 01

05. Volume Mute

00 - 01

06. Volume Control

O0 ~ 64

ntrast

O0 - 64

08. Brightness

O0~

O0 - 64

10. Tint

00 ~ 64

O0 - 64

12. OSD Select

00 - 01

O0 - 01

O0 - 64
00_64

O0 - 02

18. ISM Method

(_ p.134)

19. Power Saving

q.... 00_oi

1Z Color Temperature

(_ p.134)

22. Channel Add/Del

O0 - 01

23 Key

(_ p.135)

24. Backlight

O0 ~ 64

physical
program high

Transmission

/ Receiving

[

t Only LCD TV Model

major
program low

major low

minor high

minor low

attribute

Protocol

-0
-0
m

Z
X

Command2][

][Set

ID][

] [OK] [Data]

[x]

131

01.

Power (Command:
To control

0S. Volume Mute (Command:

k a)

Power On/Off

of the TV.

k e)

To control volume mute on/off.

Transmission
[k][a][ ][SetID][ ] [Data][Cr]

You can also adjust mute using the MUTE button on

Data 00: Power Off

Data 01 : Power On

remote control.

ID][

Transmission[k] [e][

A_knowledgement [a][

][Set

][OKiNG]

* In a like manner, if other functions
based on this format,

[Data] [x]

ID][

][Data]

'FF' data

Data 00:

Volume mute on (Volume off)

data feedback

Data 01:

Volume mute off (Volume on)

transmit

Acknowledgement

][set

presents status about each function.

Acknowledgement[el[

][Set

ID][

[cr]

][OKiNG]

[Data] [x]

Note: In this model, TV will send the Acknowledge
after power on processing

completion.

06. Volume Control

There might be a time delay between command and
acknowledge.

(Command:

k f)

To adjust volume.
You can also adjust volume with the volume buttons on
remote control.

02. Input Select

(Command:

x b)

Transmission[k] [f] []

To select input source for TV.
TransmlssiOn[x] [b][

][set

ID][

Data Min: 00 - Max: 64 (*transmit
] [Data] [cr]

Data 01 : DTV (Cable)

Data 10: Analog (Antenna)

Data 11: Analog (Cable)

Data 20:AV1

Data 21 : AV2
1

Data 90:HDMI1

Data 91:HDMI2

Data 92:HDMI3

Acknowledgement[f]

07. Contrast

Data 41: Component

Data 60: RGB-PC

Aspect

Ratio (Command:

][OK/NG]

[Data] [x]

on your model.

k c)

04: Zoom 1

09:Just

scan

][Data]

[C] [ ] [Set ID] [ ] [OK/NG]

(Command:

TransmisSiOn [k] [d] []

[Data] [x]

k d)

[set ID] []

[Data] [Cr]

Screen mute off (Picture on)

Data 01 : Screen mute on (Picture off)
ACknoWledgemen_ [d] []

[Cr]

by Hexadecimal code)

[Data] [x]

k h)

[Set ID] []

[OK/NG]

in the PICTURE menu.

[Set ID] [ ] [Data] [cr]

Data Min: 00 _ Max: 64 (*transmit

by Hexadecimal code)

_Refer to 'Real data mapping'. See page 133.

To select screen mute on/off.

132

][Set ID][

(Command:

ACknowledgement [h][]

Data 00:

in the PICTURE menu.

[g] [ ] [set ID] [ ] [OK/NG]

Transmission[k] [h][]

06: Set by program

Screen Mute

k g)

You can also adjust brightness

05: Zoom 2

Reserved

04.

[Data] [x]

*Refer to 'Real data mapping: See page 13:5.

08. Brightness

02:16:9

A_knoWledgemeni

[OKiNG]

To adjust screen brightness.

Data 01:4:3

by Hexadecimal code)

To adjust screen contrast.

Acknowledgemen_

Transmission [k] [c] [ ] [Set ID] [ ] [Data] [Cr]

Z
_D

(Command:

Transmission[k] [g][

To adjust the screen format.

"O
"O

[Set ID] []

Data Min: O0 - Max: 64 (*transmit
][Set ID][

* Use the feature depending

03.

[]

You can also adjust contrast

Data 95:HDMI4
AcknOWledgement [b][

....

*Refer to 'Real data mapping'. See page 13:5.

Data 00: DTV (Antenna)

Data 40: Component

[Set ID] [ ] [Data] [Cr]

[Data] [x]

[Set ID] []

[OK/NG]

[Data] [x]

09.

Color

(Command:

k i)

14. Treble

To adjust screen color.

(Command:

k r)

To adjust treble.

You can also adjust color in the PICTURE menu.

You can also adjust treble in the AUDIO menu.

Transmission [k][i][

TransmissiOn [k] [r][

][Set

ID][

][Data][cr]

Data Min: 00 - Max: 64 (*transmit

by Hexadecimal code)

*Refer to 'Real data mapping' as shown below.
ACknowledgemen_

10. Tint

[i] [ ] [set ID][

(Command:

] [OK/NG]

][set

ID][

][Data]

Data Min: O0 - Max: 64 (*transmit

[cr]

by Hexadecimal code)

*Refer to 'Real data mapping' as shown.

[Data] [x]

k j)

ACknoWledgemenf [r][

15. Bass (Command:

][Set ID][

][OK/NG]

[Data] [x]

k s)

To adjust screen tint.

To adjust bass.

You can also adjust tint in the PICTURE menu.

You can also adjust bass in the AUDIO menu.

Transmission [k] [j][

Transmission[k]

] [Set ID][

] [Data] [Cr]

Data Red: O0 _ Green: 64 (*transmit

by Hexadecimal code)

[s][

1[Set ID] [ 1 [Data] [Cr]

Data Min: 00 _ Max: 64 (*transmit

by Hexadecimal code)

_Refer to 'Real data mapping' as shown below.

*Refer to 'Real data mapping' as shown below.

Acknowledgement [j

ACknowledgement

11. Sharpness

] []

[set ID][]

(Command:

[OKiNG]

[Data] [x]

k k)

16. Balance

To adjust screen sharpness.

[s][

(Command:

] [Set ID][

] [OK/NG]

[Data] [x]

k t)

To adjust balance.

You can also adjust sharpness in the PICTURE menu.

You can also adjust balance in the AUDIO menu.

Transmission [k] [k][]

TransmiSsiOn [k] [t] [ ] [Set ID] [ ] [Data] [Cr]

[Set ID][]

[Data] [Cr]

Data Min: O0 _ Max: 64 (*transmit

by Hexadecimal code)

Data Min: O0 _ Max: 64 (*transmit

by Hexadecimal code)

*Refer to 'Real data mapping' as shown below.

Acknowledgement[k]

Acknowledgement[t][

12. OSD Select

[]

[Set ID][]

(Command:

[OKiNG]

[Data] [x]

k I)

1 7. Color

Temperature

][Set ID][

(Command:

][OKiNG]

[Data] [x]

k u)

To select OSD (On Screen Display) on/off.

To adjust color temperature.

TransmissiOn [k] [I][]

You can also adjust color temperature in the PICTURE menu.

[Set !D][

Data 00: OSD off

] [Data] [Cr]

Data 01 : OSD on

Acknowledgemen_ [I] [ ] [Set ID] [ ] [OK/NG]

TransmissiOn[k] [u][]

[Data] [x]

Data 00: Medium
Acknowledgement[u][]

[Set ID] []
01: Cool

[Data] [Cr]

02: Warm

[Set I D] [ ] [OK/NG]

[Data] [x]

Z
E_
X

1 3. Remote

Control

Lock Mode

To lock the remote control
on the set.
Transmission [k] [m][
Data 00: Lock off
ACknowledgemenf [m][]

][Set

(Command:

k m)

and the front

ID][

][Data]

*Real data mapping

panel controls

[Cr]

..................
A : Step 10 (SET ID 10)

Data 01 : Lock on
[Set ID][]

[OK/NG]

[Data] [x]

If you're

not using the remote

controls

on the TV, use this mode. When main power is

on/off,

remote control

control

0 : Step 0

and front

panel

F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)

lock is released.
63 : Step 99 (SET ID 99)
64 : Step 100

133

18. ISM Method

(Command:

j p)

(Only Plasma TV model)
To avoid having a fixed image remain on screen.
TransmissiOn [j ][p][]

[Set iD] [ ] [Data] [Cr]

Data 01: Inversion

02: Orbiter

04: White Wash

08: Normal

Acknowledgement[p][]

[Set ID] [ ] [OKiNG]

19. Power saving (Command:

[Data] [x]

j q)

(Only Plasma TV model)
To control the power saving function
Transmission[j

] [q][]

on/off.

[Set ID] [ ] [Data] [Cr]

Data 00: Power saving off (Power Saving Level O)
01 : Power saving on (Power Saving Level 4)
Acknowledgemen_ [q] [ ] [Set ID] [ ] [OK/NG]

20. Auto Configuration
To adjust

picture

automatically.
mode.

(Command:
position

j u)

and minimize image shaking

Auto configuration

Transmission[j]

[u][]

[Data] [x]

[Set !D][]

only works in RGB-PC

[Data] [Cr]

Data 1 : To set
Acknowledgement [u] [ ] [Set ID] [ ] [OK/NG]

21. Channel Tuning

(Command:

[Data] [x]

m a)

To tune channel to following physical/major/minor
TransmissiOn [rn] [a][]
[] [Data02]

[Set iD] [ ] [Daiaoo]

[ ] [Data03] [ ] [Data04]

number.

[ ] [Datao] ]

[ ] [Data05]

[Cr]

Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel.
Z
X

the ATSC tuner

automatically

maps the channel

Since
to the

Major number, the Physical number is not required when
sending a command.
Data 00: Physical Channel Number
NTSC air: 02-45,

NTSC cable: 01,0E-7D

ATSC air: 01-45,

ATSC cable: 01-87

Data 01 & 02: Major Channel Number
Data 01 : High byte

Data 02: Low byte

Two bytes are available for the Major and Minor, normally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.

134

Data 05:

The table above lists the binary code which must be
converted

to Hexadecimal

22.

Channel

Add/Del

(Command:

m b)

To add and delete the channels

before sending. For example:

The binary code to tune the sub source to an NTSC

TransmlssiOn [m] [b][]

cable channel is "1000

Data 00: Channel Delete

0001 ", which translates to "81"

in Hex.

Ackn6WledgemenL

[set ID] [ ] [Data] [Cr]

[b][

Data 01 : Channel Add

][Set ID][

][0K/NG]

[Data] [x]

* 7th bit : For which source do you want to change the
channel.

23.

* 6th bit: Use a two part or one part channel. Most cases

Transmlssion [m] [c][]

* 5th bit: Use 0 with NTSC since it can only use the phys-

times it doesn't

m c)

To send IR remote key code.

just use 0 since it's ignored when using NTSC.

ical channel number. Normally

Key (Command:

[Set ID] []

[Data] [cr]

Data Key code: Refer to page 128.

use 1 for ATSC since most

AcknowledgemenL [c][

][Set

ID][

][OK/NG]

[Data] [x]

matter what the physical number is.

* 4th bit: Set to 0.

24.

* 3-0 bits: Choose signal type.

Backlight

(Command:

m g)

(Only LCD TV model)
To adjust screen backlight.

* Tune Command

Examples:

Transmission [m] [g][

1. Tune to the analog (NTSC)

Data Min:00

cable channel 35.

][Set iD][]

- Max:64

(*transmit

[Data] [cr]
by Hexadecimal code)

Data 00 = Physical of 35 = 23

*Refer to 'Real data mapping

Data 01 & 02 = No Major = 00 00

Acknowledgement [g] [ ] [set ID] [ ][OKiNG]

Data 03 & 04 = No Minor = 00 00
Data 05 = 0000

0001

1' See page 135.
[Data] [x]
Z

in binary = 01
X

Total = ma 00 23 00 00 00 00 01
2. Tune to the digital (ATSC) local channel 30-3.
Data 00 = Don't know Physical = 00
Data 01 & 02 = Major is 30 = 00 1 E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22

Ackno_ledg_men![a][]
[Data02]

[Data03]

[Set !D][]

[O K.] [DataO0] [DataO] ]

[Data04 ] [x] [a][]

[Set !D]

...........

[ ] [NG] [DataO0] [x]

135

OPEN SOURCE LICENSE- This

feature is not available for all models.

GNU GENERAL PUBLIC LICENSE
Version

2, June

Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim
this license document, but changing it is not allowed.

1991

the program proprietary.

To prevent this, we have made it clear

that any patent must be licensed for everyone's
licensed at all.

free use or not

copies of
The precise terms and conditions
modification follow.

for copying, distribution

and

Preamble
GNU GENERAL PUBLIC LICENSE
The licenses for most software are designed

to take away your

freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share
and change free software

- to make sure the software is free for

TERMS AND CONDITIONS
AND MODIFICATION

all its users. This General Public License applies to most of the
Free Software

Foundation's

whose authors
foundation

commit

software and to any other

to using

it. (Some other

DISTRIBUTION

This license applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The

program

free software

"Program",

software is covered by the GNU Lesser General Public

License instead.)

FOR COPYING,

below, refers to any such program or work, and a

"work based on the Program" means either the Program orany
derivative work under copyright law: that is to say, a work con-

You can apply it to your programs, too.

taining the Program or a portion

When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code
or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can
do these things.

modifications
(Hereinafter,

and/or
translation

of it, either verbatim

translated

into

another

is included

without

or with

language.

limitation

in the

term "modification".)

Each licensee is addressed as "you".

Activities

copying, distribution

other

are not covered

than

and modification

by this license; they are outside

The act of running the Program is not restricted,

its scope.

and the out-

put from the program is covered only if its contents constitute

To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.
-O
-O

Z
X

a work based on the program (independent
made by running the program). Whether
on what the program does.
1.

For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get
the source code. And you must show them these terms so they
know their rights.
We protect

your rights with two steps: (1) copyright
and/or

You may copy and distribute verbatim copies of the program's
source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this license and to the
absence of any warranty; and give any other recipients of the
program a copy of this license along with the Program.

the soft-

ware, and (2) offer you this license which gives you legal permission to copy, distribute

of having been

that is true depends

You may charge a fee for the physical act of transferring
copy, and you may at your option offer warranty protection

modify the software.

a
in

exchange for a fee.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this
free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is
not the original, so that any problems introduced by others will
not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making

136

You may modify your copy or copies of the program or any
portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the
terms of section 1 above, provided that you also meet all of
these conditions:
a) You must cause the

modified

files to

carry

prominent

notices stating that you changed the files and the date of
any change.

b) You must cause any work that you distribute
that

in whole or in part contains

or publish,

or is derived

c) Accompany

from the

it with the information

offer to distribute

corresponding

you received as to the
source code. (This alter-

Program or any part there of, to be licensed as a whole at

native is allowed only for noncommercial

no charge to all third
license.

only if you received the program in object code or executable form with such an offer, in accord with Subsection

c) If the modified

parties

under

the terms

program normally reads commands interac-

tively when run, you must cause it, when started
for such interactive
or display

of this

including

b above.)
The source code for a work means the preferred form of the

an appropriate

work for making modifications

to it.

complete

may redistribute

plus the scripts used to control

telling

the

the program under these conditions,

user

how

view

a copy

(Exception: if the Program itself is interactive
normally print such an announcement,

this

license.

of the executable.
code distributed

your work based on

distributed

the Program is not required to print an announcement.)

(in either source or binary form) with the major

Program, and can be reasonably considered

If distribution

and

of executable

or object

code is made by offer-

ing access to copy from a designated

do not apply to those sections

equivalent

them as

the same sections as

place, then

offering

access to copy the source code from the

place counts as distribution

part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this license,
for other

the source

that is normally

components
(compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component

separate works in themselves, then this license, and its terms,

whose permissions

files,

and installation

However, as a special exception,
need not include anything

itself accompanies the executable.

separate works. But when you distribute

work,

interface definition

compilation

These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the
independent

For an executable

source code means all the source code for all mod-

ules it contains, plus any associated

and

but does not

when you distribute

and

running

use in the most ordinary way, to print

an announcement

distribution

same

of the source code, even though

third parties are not compelled

to copy the source along with

the object code.

licensees extend to the entire

whole, and thus to each and every part regardless
wrote it.

of who

You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this license.
otherwise

copy,

modify,

sublicense

Any attempt

distribute

Program is void, and will automatically

test your

by you; rather, the

under this license. However, parties who have received copies,

the distribution

or rights, from you under this license will not have their licens-

rights to work written

entirely

intent is to exercise the right to control
derivative

or collective

In addition,

works based on the program.

mere aggregation

of another

es terminated
ance.

on a volume of a storage

or distribution

You are not required to accept this license, since you have not
signed

it. However, nothing

does not bring the other work under the scope of this license.

modify

or distribute

the

else grants
Program

These actions are prohibited
license. Therefore,

3. You may copy and distribute the program (or a work based on
it, under section 2) in object code or executable form under
1 and 2 above provided

it with the complete

that you also
machine-

readable source code, which must be distributed

under the

terms of sections

1 and 2 above on a medium customarily

used for software interchange;
b) Accompany

or,

it with a written offer, valid for at least three

or distributing

or modifying

from the original

licensor to copy, distribute

Program subject to these terms and conditions.

your cost of physically

performing

impose any further

source code, to be distributed

copy

source distribution,
of the

under the terms of sections

1 and 2 above on a medium customarily
interchange;

corresponding

the program

Each time you redistribute the program (or any work based on
the Program), the recipient automatically
receives a license

party, for a charge no more than

machine-readable

Z
C7

the program or works

years, to give any third
complete

works.

by law if you do not accept this

by modifying

for copying, distributing
based on it.

corresponding

you permission

or its derivative

(or any work based on the program), you indicate your acceptance of this license to do so, and all its terms and conditions

do one of the following:
a) Accompany

rights

so long as such parties remain in full compli-

medium

the terms of sections

your

work not based on

the program with the Program (or with a work based on the
program)

terminate

the

Thus, it is not the intent of this section to claim rights or con-

the rights granted
ing compliance

restrictions

or modify

on the recipients'

herein. You are not responsible

the

You may not
exercise of
for enforc-

by third parties to this license.

used for software

or,

137

If, as a consequence

of a court

patent

infringement

patent

issues), conditions

judgment

or for any other

or allegation

reason (not limited to

are imposed

on you (whether

court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license. If you cannot distribute
fy simultaneously
other
not

pertinent
distribute

license

your obligations
obligations,

the

would not

so as to satis-

under this license and any

then as a consequence

you may

any later version published
If the program

number

of this

license, you may choose any version ever published
Free Software Foundation.

by the

lO.If you wish to incorporate
the author
righted

Software Foundatiom

of the

conditions

to ask for permission.

program at all. For example, if a patent
redistribution

a version

parts of the program into other free

programs whose distribution

permit

royalty-free

by the Free Software Foundation.

does not specify

by the Free Software

are different, write to

For software which is copy-

Foundation,

we sometimes

write

to the Free

make exceptions

for this.

program by all those who receive copies directly or indirectly

Our decision will be guided by the two goals of preserving the

through

free status of all derivatives

you, then the only way you could satisfy both it and

this license would be to refrain entirely

from distribution

of our free software and of pro-

moting the sharing and reuse of software generally.

the program.
NO WARRANTY
If any portion

of this section is held invalid or unenforceable

under any particular

circumstance, the balance of the section

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,

is intended to apply and the section as a whole is intended to

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN

apply in other

circumstances.

OTHERWISE STATED IN WRITING THE COPYRIGHT
It is not the purpose of this section to induce you to infringe

ERS AND/OR

any patents or other property

IS"

right claims or to contest valid-

ity of any such claims; this section has the sole purpose
protecting

the integrity

of the free software distribution

tem, which is implemented
of software

distributed

through

consistent

application

author/donor
software

to decide

through

sys-

by public license practices.

people have made generous contributions
that

that

Many

to the wide range

system in reliance

system;

is up

on
the

if he or she is willing to distribute

any other

system and a licensee

WARRANTY

ANY

EXPRESSED OR IMPLIED, INCLUDING,

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY
PROGRAM IS WITH

AND

PERFORMANCE

is intended

If the distribution

and/or

certain countries

either

faces, the original

to make thoroughly

clear what

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.

of the rest of this license.

AGREED TO IN WRITING WILL ANY COPYRIGHT
OR ANY OTHER PARTY WHO MAY MODIFY

by patents

or by copyrighted

inter-

holder who places the program

limitation

excluding

permitted

only in or among countries

those countries,

such case, this license incorporates

so that

distribution

not thus excluded.

the limitation

TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN

as if written

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
cerns.
Each version is given a distinguishing
a version

number

applies to it and "any later version",
following the terms and conditions

138

GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-

The Free Software Foundation may publish revised and/or
new versions of the General Public License from time to time.

specifies

ANY GENERAL,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PRO-

in the body of this license.

program

HOLDER,
AND/OR

REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE

use of the program is restricted

under this license may add an explicit geographical

OF THE

YOU. SHOULD THE PROGRAM PROVE

LIABLE TO YOU FOR DAMAGES, INCLUDING
Z
C7

EITHER

12.1N NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR

believed to be a consequence
8.

KIND,

BUT NOT LIMITED

cannot

impose that choice.
This section

WITHOUT

HOLD-

OTHER PARTIES PROVIDE THE PROGRAM "AS

version number.
of this

or con-

If the

license which

you have the option

either of that version or of

END OF TERMS AND CONDITIONS

Also add information

on how to contact

you by electronic

and

paper mail.
How to apply these terms to your new programs
If you develop a new program, and you want it to be of the greatest possible

If the program is interactive, make it output
this when it starts in an interactive mode:

a short

notice

use to the public, the best way to achieve this is to

make it free software which everyone can redistribute
under these terms.

and change

Gnomovision
Gnomovision

version 69, Copyright
(C) year name of author
comes with ABSOLUTELY NO WARRANTY; for

details type 'show w'. This is free software, and you are welcome
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively convey the exclusion of warranty;
least the "copyright"
found.

it under

certain

conditions:

'show

c' for

name and a brief idea of what it

The hypothetical

commands

'show w' and 'show c' should show

the appropriate

parts of the General Public License. Of course,

the

you use may be called something

commands

other

'show w' and 'show c'; they could even be mouse-clicks
items-whatever

than

or menu

suits your program.

This program

is free software;

you can redistribute

it and/or

modify it under the terms of the GNU General Public License as
published

type

and each file should have at

line and a pointer to where the full notice is

one line to give the program's
does.

to redistribute
details.

by the Free Software

the license, or (at your option)

Foundation:

either version

gram, if necessary.

disclaimer"

Yoyodyne, Inc., hereby disclaims all copyright

in the hope that it will be useful, but

signature

Ty Coon, President of Vice

You should

This General Public License does not permit

GNU General

Public

written by

James Hacker.

POSE. See the GNU General Public License for more details.
of the

interest in the pro-

(which makes passes at compilers)

WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-

have received a copy

for the pro-

Here is a sample; alter the names:

2 of

any later version.

gram 'Gnomovision'
This program is distributed

(if you work as a programmer)

or your school, if any, to sign a "copyright

of Ty Coon, 1 April 1989

program into proprietary

incorporating

your

programs. If your program is a subrou-

License along with this program: if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA

tine library, you may consider it more useful to permit linking pro-

02110-1301

prietary applications with the library. If this is what you want to
do, use the GNU Lesser General Public License instead of this

USA.

license.

Z
C7
X

139

GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999

To protect

Everyone is permitted

ified by someone else and passed on, the recipients

to copy and distribute

this license document,
[This is the first
counts

verbatim

copies

but changing it is not allowed.

released version

of the

Lesser GPL.

each distributor,

we want to make it very clear that

there is no warranty for the free library. Also, if the library is modshould know

that what they have is not the original version, so that the original author's reputation will not be affected by problems that
It also

might be introduced

by others.

as the successor of the GNU Library Public License, ver-

sion 2, hence the version number 2.1.]

Finally, software patents pose a constant
of any free program.

Preamble
to take away your

any patent license obtained

freedom

the GNU General

consistent

to share and change it. By contrast,

and change free software
all its users.

to the existence

not effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that

The licenses for most software are designed
Public Licenses are intended

threat

We wish to make sure that a company can-

to guarantee your freedom

for a version of the library must be

with the full freedom

of use specified

in this license.

to share

- to make sure the software is free for

Most GNU software,

including

some libraries, is covered by the

ordinary GNU General Public License. This license, the GNU
Lesser General Public License, applies to certain designated

This license, the Lesser General Public License, applies to some

libraries, and is quite different

specially designated software
the Free Software Foundation

License. We use this license for certain libraries in order to per-

packages - typically libraries - of
and other authors who decide to

from the ordinary

General Public

mit linking those libraries into non-free programs.

use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public
License is the better strategy to use in any particular case, based

When a program is linked with a library, whether statically or
using a shared library, the combination
of the two is legally

on the explanations

speaking a combined work, a derivative of the original library. The

below.

ordinary
When we speak of free software, we are referring to freedom

use, not price. Our General Public Licenses are designed to make

Public License therefore
combination

fits

permits

its criteria

such linking

of freedom.

The

copies of free soft-

ware (and charge for this service if you wish); that you receive
source code or can get it if you want it; that you can change the

We call this license the "Lesser" General Public License because

software and use pieces of it in new free programs; and that you

it does Less to protect

are informed that you can do these things.

General Public License. It also provides other free software devel-

Z
C7
X

General

if the entire

Lesser General Public License permits more lax criteria for linking
other code with the library.

sure that you have the freedom to distribute

-O
-O
m

only

To protect your rights, we need to make restrictions that forbid
distributors to deny you these rights or to ask you to surrender
these rights. These restrictions
for you if you distribute

translate to certain responsibilities

the user's freedom

than

the ordinary

opers Less of an advantage over competing non-free programs.
These disadvantages are the reason we use the ordinary General
Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.

copies of the library or if you modify it.
For example, on rare occasions, there may be a special need to

For example, if you distribute

copies of the library, whether gratis

or for a fee, you must give the recipients all the rights that we
gave you. You must make sure that they, too, receive or can get

encourage the widest possible use of a certain library, so that it
becomes a de-facto standard. To achieve this, non-free programs
must be allowed to use the library. A more frequent

case is that

the source code. If you link other code with the library, you must

a free library does the same job as widely used non-free libraries.

provide

In this case, there is little to gain by limiting the free library to free

complete

object files to the recipients,

so that they can

relink them with the library after making changes to the library
and recompiling

software only, so we use the Lesser General Public License.

it. And you must show them these terms so they
In other cases, permission

know their rights.

to use a particular

library in non-free

programs enables a greater number of people to use a large body
We protect your rights with a two-step

method: (1) we copyright

of free software.

the library, and (2) we offer you this license, which gives you legal

Library in non-free

permission

the

to copy, distribute

and/or

modify the library.

whole GNU

GNU/Linux

140

For example, permission

to use the

GNU C

programs enables many more people to use
operating

operating

system, as well as its variant,

system.

the

Although the Lesser General Public License is Less protective of
the users' freedom, it does ensure that the user of a program that

each copy an appropriate

is linked with the Library has the freedom and the wherewithal

and to the absence of any warranty; and distribute

warranty;

run that program using a modified version of the Library.
The precise terms and conditions

for copying, distribution

and

with the library in order to run.

a
in

exchange for a fee.
2.

GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS
AND MODIFICATION

You may modify your

FOR COPYING,

DISTRIBUTION

copy or copies of the Library or any

of it, thus forming a work based on the Library, and

copy and distribute such modifications
or work under the
terms of section 1 above, provided that you also meet all of
these conditions:
a) The modified work must itself be a software library.
b) You must

0. This license agreement applies to any software library or other
program which contains a notice placed by the copyright
authorized

party

the terms of this

Lesser General

Public License (also

means a collection

as "you".

of software functions

data prepared so as to be conveniently

modified

carry

prominent

any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this license.
d) If a facility in the modified

and/or

linked with application

programs (which use some of those functions
form executables.

cause the files

notices stating that you changed the files and the date of

hold-

saying it may be distributed

called "this license"). Each license is addressed
A "library"

a copy of

You may charge a fee for the physical act of transferring
copy, and you may at your option offer warranty protection

portion

under

code derived from the library, whereas the

latter must be combined

er or other

notice and disclaimer

this license along with the Library.

modification follow. Pay close attention to the difference between
a "work based on the library" and a "work that uses the library".
The former contains

keep intact all the notices that refer to this license

Library refers to a function

or a

table of data to be supplied by an application

program that

uses the facility, other than as an argument

passed when

the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not

and data) to

supply such function
performs

or table, the facility still operates, and

whatever part of its purpose remains meaningful.

The "Library", below, refers to any such software library or work
which has been distributed under these terms. A "work based

(For example, a function

on the Library" means either the Library or any derivative work
under copyright
law: that is to say, a work containing the

has a purpose that is entirely well-defined independent of the
application.
Therefore, Subsection 2d requires that any appli-

library or a portion

of it, either verbatim or with modifications

cation-supplied

and/or

straightforwardly

optional:

if the application

function

must still compute square roots.)

translated

(Hereinafter,

translation

into another

is included without

language.

limitation

in the

in a library to compute square roots

function or table used by this function must be
does not supply it, the square root

term "modification".)
"Source

code"

for a work means the preferred

form of the

These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the

work for making modifications
to it. For a library, complete
source code means all the source code for all modules it con-

separate works in themselves, then this license, and its terms,

tains, plus any associated

do not apply to those sections

scripts

used to control

interface

definition

compilation

files, plus the

and installation

of the

library.
Activities

library, and can be reasonably

considered

independent

when you distribute

separate works. But when you distribute

and

Z
C7
X

them as

the same sections as

part of a whole which is a work based on the library, the distribution of the whole must be on the terms of this license,
other

are not covered

than copying,

distribution

and modification
its scope.

whose

permissions

for other

licenses extend to the

entire

The act of running a program using the Library is not restrict-

whole, and thus to each and every part regardless
wrote it.

ed, and output

Thus, it is not the intent of this section to claim rights or con-

tents constitute

by this license; they are outside

from such a program is covered only if its cona work based on the library (independent

the use of the Library in a tool for writing it). Whether that is
true depends on what the library does and what the program

of who

test your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution
of
derivative

or collective

works based on the library.

that uses the library does.
In addition,
1. You may copy and distribute

verbatim

copies of the library's

complete source code as you receive it, in any medium, provided that you conspicuously and appropriately
publish on

the

mere aggregation

library with

the library

of another
(or with

work not based on

a work

based on the

library) on a volume of a storage or distribution
medium does
not bring the other work under the scope of this license.

141

You may opt to apply the terms of the ordinary

GNU General

the object file is unrestricted,

regardless of whether it is legal-

Public License instead of this License to a given copy of the

ly a derivative

work.

Library. To do this, you must alter all the notices that refer to

plus portions

of the library will still fall under Section 6.)

this License, so that they refer to the ordinary

Otherwise,

version than version

distribute

License has appeared,

then you

GNU General

can specify

instead if you wish.) Do not make any other
notices.

containing

this object code

GNU General

Public License, version 2, instead of to this License. (Ifa newer
2 of the ordinary

(Executable

that

Public
version

if the work is a derivative
the object

of the library, you may

code for the work under

Section 6. Any executable containing

change in these

Section

6, whether

the terms of

that work also fall under

or not they are linked directly

with the

library itself.

Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies
to all subsequent

copies and derivative works made from that

As an exception

to the sections above, you may also combine

or link a "work that uses the library" with the library to pro-

copy.
This option is useful when you wish to copy part of the code

duce a work containing

of the library into a program that is not a library.

permit

portions

modification

of the work for the customer's

and reverse engineering
4.

You may copy and distribute

You must give prominent

under the terms of Sections

that the library is used in it and that the Library and its use

it with

terms of sections
used for software
If distribution

the

1 and 2 above provided that you

complete

corresponding

machine-

must be distributed

under the

1 and 2 above on a medium

customarily

interchange.

of object

copy from a designated
requirement

place, then offering equivalent

to distribute

are covered by this license. You must supply a copy of this
license.

If the

work

third

to copy the source along with the

object code.

a) Accompany

the

machine-readable

code and/or

or linked with

it, is called a "work that

uses the

library and then relink to produce

the

scope

of this

including

linked with the Library, with the complete

by being
work of

corresponding
library

whatever changes were used in the work (which must be
distributed under Sections 1 and 2 above); and, if the work

to work with the Library

falls outside

the user to the

complete

is designed

the Library, and therefore
license.

displays

notice for the library

code for the

Library, but

is not a derivative

of the

with the

source

no derivative

Library". Such a work, in isolation,

of any portion

work

A program that contains
compiled

machine-readable

"work that

uses the Library", as object

source code, so that the user can modify the
a modified

executable

containing the modified library. (It is understood that the
user who changes the contents of definitions files in the
library will not necessarily be able to recompile the application to use the modified definitions.)

However, linking a "work that uses the library" with the Library
creates

an executable

that

is a derivative

of the

Library

b) Use a suitable shared library mechanism for linking with the
library. A suitable mechanism is one that (1) uses at run time

(because it contains portions of the library), rather than a
"work that uses the library". The executable is therefore cov-

a copy of the library already present on the user's computer

ered by this license. Section 6 states terms for distribution
such executable.

cutable, and (2) will operate properly with a modified version

er file that is part of the library, the object code for the work
may be a derivative work of the library even though the source
code is not.
Whether this is true is especially
linked without
threshold

structure

significant if the work can be

the library, or if the work is itself a library. The

for this to be true is not precisely defined by law.

If such an object

file uses only

layouts and accessories,

inline functions

numerical

parameters,

data

and small macros and small

(ten lines or less in length),

system, rather than copying library functions

into the exe-

of the library, if the user installs one, as long as the modified

When a "work that uses the library" uses material from a head-

142

execution

copy of this license. Also, you must do one of these things:

is an executable

during

notices, you must include the copyright

access

the source code, even though

parties are not compelled

notice with each copy of the work

among them, as well as a reference directing

code is made by offering access to

to copy the source code from the same place satisfies the

Z
C7

own use

such modifications.

the library (or a portion or deriv-

readable source code, which

for debugging

ative of it, under Section 2) in object code or executable form
accompany

of the library, and distribute

that work under terms of your choice, provided that the terms

then the use of

version is interface-compatible
work was made with.

with the version that

the

c) Accompany the work with a written offer, valid for at least
three years, to give the same user the materials specified in
Subsection

6, above, fora charge no more than the cost of

performing

this distribution.

d) If distribution

of the work is made by offering

access to

copy from a designated

place, offer equivalent

copy the above specified

materials from the same place.

access to

e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.

For an executable,
the library"

the required

ed for reproducing
cial

form of the "work that uses

must include any data and utility

exception,

the executable from it. However, as a spe-

the

include anything

materials

be distributed

that is normally distributed

and so on) of the operating
runs, unless that
cutable.

of other

(compiler,

itself

proprietary

the operating

accompanies

contradicts

kernel,

the

exe-

the license

libraries that do not normal-

system.

of the rights granted
You are not

Such a contradiction

means you cannot use both them and the library together

11. If, as a consequence

infringement

library facilities

not

such a combined

that are a work based on the

covered

by this

library, provided

with

patent

issues), conditions

other

license, and distribute

that the separate distributhat

you do

work

based on the

library with a copy of the same

Library, uncombined

library facilities. This must be distributed
of the sections above.
fact that

the con-

of this license. If you cannot distribute

fy simultaneously
other

pertinent

your obligations
obligations,

so as to satis-

under this license and any

then as a consequence

you may

the library at all. For example, ifa patent license

would not permit royalty-free

redistribution

who receive copies directly
the only way you could

license would be to refrain entirely

of the library by

or indirectly

satisfy

both

through

it and this

from distribution

of the

library.
If any portion

of this section is held invalid or unenforceable

under any particular

circumstance, the balance of the section

to apply, and the section as a whole is intended to

It is not the purpose of this section to induce you to infringe

the combined

b) Give prominent

on you (whether

that contradict

of this license, they do not excuse you from the con-

any patents or other property
a) Accompany

ditions

apply in other circumstances.

and provided

or allegation

ditions

facilities

permitted,

by third

reason (not limited to

are imposed

is intended

these two things:

judgment

or otherwise)

tion of the work based on the Library and of the other library
is otherwise

compliance

or for any other

court order, agreement

all those

in a single library together

of a court

patent

you, then
library side-by-side

for enforcing

parties with this license.

not distribute

an executable that you distribute.
You may place library facilities

herein.

responsible

not

system on which the executable

component

It may happen that this requirement
ly accompany

need

(in either source

or binary form) with the major components

restrictions

programs need-

notice

with

under the terms

protecting

the integrity

has the sole purpose

of the free software distribution

tem which is implemented

library of the

based on the library,

explaining where to find the accompanying
form of the same work.

and

uncombined

of software

distributed

through

consistent

application

author/donor
software

to decide

through

that

of
sys-

by public license practices.

people have made generous contributions

with the combined

part of it is a work

any other

right claims or to contest valid-

ity of any such claims; this section

Many

to the wide range

system in reliance

system;

is up

on
the

if he or she is willing to distribute

any other

system and a license

cannot

impose that choice.
8. You may not copy, modify, sublicense, link with, or distribute
the library except

as expressly

provided

under

this license.

Any attempt

otherwise

or distribute

the library is void, and will automatically

This section

is intended

to make thoroughly

believed to be a consequence

termi-

However, parties who have

received copies, or rights, from you under this license will not
have their licenses terminated

so long as such parties remain

in full compliance.

12. If the distribution
tain countries

and/or

use of the library is restricted

either by patents or by copyrighted

the original copyright
those

holder who places the library under this

countries,

so that

only in or among countries
signed it. However, nothing else grants you permission to modthe

library or its derivative

works.

or distributing

the library (or any work

based on the library), you indicate your acceptance
license to do so, and all its terms and conditions
distributing

or modifying

this license incorporates
of this license.

of this

for copying,

the library or works based on it.

link with or mod-

ify the library subject to these terms and conditions.

You may

not impose any further restrictions

exercise

on the recipients'

limitation
is permitted

not thus excluded. In such case,

the limitation as if written in the body

13.The Free Software Foundation may publish revised and/or
new versions of the Lesser General Public License from time to
time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems
concerns.
Each version is given a distinguishing

lO.Each time you redistribute the library (or any work based on
the Library), the recipient automatically
receives a license
from the original licensor to copy, distribute,

distribution

Z
C7

These

by law if you do not accept this license.

Therefore, by modifying

in cer-

interfaces,

license may add an explicit geographical distribution
excluding

9. You are not required to accept this license, since you have not
ify or distribute

to copy, modify, sublicense, link with,

nate your rights under this license.

actions are prohibited

clear what

of the rest of this license.

version number.

If the

library specifies a version number of this license which applies
to it and "any later version", you have the option of following
the terms and conditions
version published

either of that version or of any later

by the Free Software Foundation.

143

If the library does not specify

a license version number, you

may choose any version ever published
Foundation.
14.1f you wish to incorporate

To apply these terms, attach the following notices to the library.
It is safest to attach them to the start of each source file to most
effectively

parts of the library into other free

programs whose distribution
these, write to the author

by the Free Software

conditions

are incompatible

to ask for permission.

by the Free Software Foundation,

to the Free Software

Foundation;

we sometimes

line and a pointer to where the full

with

For software

which is copyrighted

convey the exclusion of warranty; and each file should

have at least the "copyright"
notice is found.

write

one line to give the library's
Copyright

name and a brief idea of what it does.

(C)

make excep-

tions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software

This library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as

and of promoting

published

the sharing and reuse of software generally.

by the Free Software Foundatiom

the license, or (at your option)

either version 2.1 of

any later version.

NO WARRANTY
This library is distributed
15.BECAUSE

THE LIBRARY IS LICENSED FREE OF CHARGE,

THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT
ERS AND/OR
IS"

HOLD-

in the hope that

it will be useful, but

WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU

Lesser General

Public License for more

details.

OTHER PARTIES PROVIDE THE LIBRARY "AS

WITHOUT

WARRANTY

ANY

EXPRESSED OR IMPLIED, INCLUDING,

KIND,

EITHER

BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY
LIBRARY IS WITH

YOU.

AND

PERFORMANCE

SHOULD

THE

You should

have received

a copy of the GNU Lesser General

Public License along with this library; if not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA

02110-1301

USA

OF THE

LIBRARY PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY

Also add information

on how to contact

you by electronic

and

paper mail.

SERVICING, REPAIR OR CORRECTION.
You should also get your employer (if you work as a programmer)
16.1N NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT
OR ANY OTHER PARTY WHO MAY MODIFY
REDISTRIBUTE

THE LIBRARY AS PERMITTED

LIABLE TO YOU FOR DAMAGES, INCLUDING

HOLDER,
AND/OR

ABOVE, BE

ANY GENERAL,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
Z
C7
X

LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to apply these terms to your new libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend
ware that everyone
by permitting

can redistribute

redistribution

under these terms (or, alternatively,

under the terms of the ordinary

144

making it free soft-

and change. You can do so

General Public License).

or your

school, if any, to sign a "copyright

disclaimer"

for the

library, if necessary. Here is a sample; alter the names:
Yoyodyne,

Inc., hereby

disclaims

all copyright

library 'Frob' (a library for tweaking
Random Hacker.
signature

of Ty Coon, 1 April

Ty Coon, President of Vice

1990

knobs)

interest
written

in the

by James

MOZILLA PUBLIC LICENSE
Version 1.1

1 •Definitions•

code

which

is described

in the

source

code

notice

required by exhibit as original code, and which, at the time
1.0.1. "Commercial

use" means distribution

the covered code available to a third
1.1.

or otherwise

making

of its release under

party.

"Contributor"
means each entity that
tributes to the creation of modifications•

this license

is not already

covered

code governed by this license.

creates

or con-

1.lO.l ."Patent claims" means any patent claim(s), now owned or
hereafter acquired,

including

without

limitation,

method,

process, and apparatus claims, in any patent licensable by
1.2.

"Contributor

version" means the combination

inal code, prior

modifications

the modifications

of the orig-

used by a contributor,

made by that particular

grantor.

and
1.11.

contributor.

"Source code"

means the preferred

code for making modifications
1.3.

"Covered

code" means the original code or modifications

or the combination

in each case including
1.4.

"Electronic

it contains,

of the original code and modifications,
portions

distribution

thereof.

mechanism"

ty for the electronic

transfer

executable,

interface

compilation

source

code

definition

files,

and installation

of an

differential

comparisons

against either the original code or another
available covered code of the contributor's

means a mechanism

generally accepted in the software development

plus any associated

scripts used to control

form of the covered

to it, including all modules

communi-

well known,
choice. The

source code can be in a compressed or archival form, pro-

of data.

vided the appropriate

decompression

or de-archiving

soft-

ware is widely available for no charge.
1.5.

1.6.

"Executable" means covered code in any form other
source code.
"Initial

developer"

than
1.12.

"You" (or "Your")

1.8.

means the individual or entity identified

under section 6.1.

by exhibit A.

For legal entities, "You" includes any entity which controls,
by, or is under common

purposes of this definition,

or portions thereof
of this License.

direct or indirect, to cause the direction

with code not governed by the terms

such entity, whether by contract

"License" means this document•
means having the right to grant, to the maxi-

mum extent possible,

whether

grant or subsequently

acquired,

conveyed

any and all of the rights

means any addition
or structure

to or deletion

of either the original

any previous
modifications•
When covered
released as a series of files, a modification is:

containing

to or deletion

(50%)

of such entity.

of the outstandZ
C7
X

2. Source Code License.

2.1.

The initial developer

grant.

The initial developer

hereby grants You a world-wide,

from

non-exclusive

lectual property

from the contents

code

claims:

a) under intellectual
trademark)

of a file

original code or previous modifications•

property

rights (other than patent or

licensable by initial developer to use, repro-

code

sublicense and distrib-

ute the original code (or portions
out modifications,

or previous modifications.

and/or

thereof)

with or with-

as part of a larger work; and
by the making, using or

selling of original code, to make, have made, use, practice, sell, and offer for sale, and/or
of the original code (or portions

code" means source code of computer

roy-

license, subject to third party intel-

(b) under patents claims infringed

"Original

code or

B. Any new file that contains any part of the original

1.10.

or (b) own-

ing shares or beneficial ownership

duce, modify, display, perform,
A. Any addition

or management

or otherwise,

ership of more than fifty percent

alty-free,
the substance

means (a) the power,

at the time of the initial

herein.

"Modifications"

"control"

control with You. For

"Larger work" means a work which combines covered code

1 •8•1 •"Licensable"

1.9.

or a legal entity

as the initial Developer in the Source Code notice required

is controlled
1 .Z

means an individual

exercising rights under, and complying with all of the terms
of, this license or a future version of this license issued

otherwise

dispose

there of).

software

145

in this section 2.1 (a) and (b) are

on the date Initial developer

original

You may not offer or impose any terms on any source code

first distributes

version that

code under the terms of this license.

you

(d) Notwithstanding
section 2.1(b)
above, no patent
license is granted: 1 ) for code that You delete from the
original

Code; 2) separate from the original code;

3) for infringements

may include

the applicable

an additional

additional

rights described

Availability

of source code.

version

rights hereunder.
document

However,

offering

the

in section 3.5.

caused by: i) the modification

the original code or ii) the combination
code with other software or devices.

alters or restricts

this license or the recipients'

3.2.

of the original

Any modification
which you create or to which you contribute must be made available in source code form under
the terms of this license either on the same media as an

2.2.

Contributor
Subject

Grant.

to third

executable

party

intellectual

property

claims, each

contributor
hereby grants You a world-wide,
non-exclusive license

version or via an accepted

electronic

distribu-

tion mechanism to anyone to whom you made an executable version available_ and if made available via elec-

royalty-free,

tronic distribution

mechanism, must remain available forat

least twelve (12) months after the date it initially
(a) under intellectual property
or trademark)
licensable
reproduce,
distribute
tor

modify,

display,

perform,

the modifications

(or portions

basis, with
and/or

rights (other than patent
by contributor,
to use,

thereof)

other

sublicense

and

available to such recipients.

either

on an unmodified

the electronic

as covered

third party.

modifications,

code

distribution

mechanism

is maintained

by the making, using, or

3.3.

Description

of modifications.

selling of
modifications
made by that contributor
either alone and/or in combination with its contributor

You must cause all covered code to which you contribute

version

that covered code and the date of any change. You must

(or portions

of such combination),

contain a file documenting

to make,
otherwise

include a prominent

statement

that

the modification

derived, directly or indirectly, from original code provided by

ifications made by that contributor

developer in (a) the source code, and (b) in any notice in an

the initial developer and including the name of the

with its contributor

of such combination).

executable version or related documentation

cial use of the covered code.
(d) Notwithstanding

section

above,

patent

license is granted: 1 ) for any code that contributor
deleted from the contributor
the contributor

has

version; 2) separate from

version_ 3) for infringements

by: i) third party modifications

of contributor

contributor
patent

version)

claims

or other

infringed

absence of modifications

code

Intellectual

property

matters

(a) Third party claims.
If contributor

has knowledge that a license under a third

party's intellectual

property

rights is required to exercise

the rights granted

version

or 2.2, contributor must include a text file with the source
code distribution titled "LEGAL" which describes the claim

in the

made by that contributor.

by such contributor

under sections

and the party making the claim in sufficient
recipient will know whom to contact.
such knowledge after the modification
described

in section 3.2, contributor

Obligations.

Application

which You create or to which you con-

shall promptly

(b) Contributor

covered code may be distributed
this license or a future version

programming

section

modi-

makes available

new knowledge has been obtained.

tribute are governed by the terms of this license, including
without limitation section 2.2. The source code version of

under

obtains

is made available as

thereafter and shall take other steps (such as notifying
appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the covered code that

of license.

The modifications

2.1

detail that a

If contributor

fy the LEGAL file in all copies contributor
3. Distribution

in which you

caused

devices_ or 4) under
covered

initial

describe the origin or ownership of the covered code.
3.4.

2.2(b)

or ii) the combination of modifications made by that
contributor
with other software (except as part of the

only under the terms of
of this license released

6.1, and you must include a copy of this

license with every copy of the source code you distribute.

146

the changes You made to create

dispose off 1) modifications made by that contributor
(or portions thereof)_ and 2) the combination of modversion (or portions

3.1.

by a

as part of a larger work_ and

for ensur-

ing that the source code version remains available even if

use, sell, offer for sale, have made, and/or

Z
C1

You are responsible

created by such contribu-

(b) under patent claims infringed

-O
-O
I"H

became

available, or at least six (6) months after a subsequent
version of that particular modification
has been made

If contributor's

APIs.
modifications
interface

include

and contributor

application

has knowledge

patent licenses which are reasonably necessary to implement
that API, contributor
must also include this information in
the LEGAL file.

3.Z

You may create a larger work by combining
with other code not governed

modifications
are contributor's
and/or contributor
has sufficient

and distribute

original
creation(s)
rights to grant the rights

Required notices.

covered code

by the terms of this license

the larger work as a single product.

In such

a case, you must make sure the requirements
license are fulfilled for the covered code.

by this license.

of this

4. Inability to comply due to statute or regulation.

You must duplicate the notice in exhibit A in each file of

If it is impossible for you to comply with any of the terms

the source code.

of this license with respect to some or all of the covered

a particular

If it is not possible to put such notice in

source code file due to its structure,

must include such notice in a location
directory)

then You

code due to statute, judicial

(such as a relevant

If You created one or more modification(s),

may add

your

in exhibit A. you must also duplicate this license

name as a contributor

in any documentation
describe

recipients'

covered

code.

for the

the

notice

included with all distributions

code where You

to the extent

rights or ownership

rights relating to

description

You may choose to offer, and to charge a
indemnity

to one or more recipients

absolutely

or any contributor.

obligation

is offered

hereby agree to indemnify
contributor

5. Application

indemnity

or liability

Distribution

You may distribute
the requirements

or regulation,

such

detailed for a recipient

it.

the Initial developer

of this license.

indemni-

by you alone, and You

6. Versions of the license.

and every

as a result of warranty,

6.1.

support,

New versions.
Netscape communications corporation
("Netscape")
may
publish revised and/or new versions of the license from

terms you offer.

of executable

must be sufficiently

This license applies to code to which the initial developer has
attached the notice in exhibit A and to related covered code.

You must make it

for any liability incurred by the Initial develop-

er or such contributor

of the source code. Except

by statute

or liability obligations

of covered code. However, you

clear than any such warranty, support,

ty or liability

prohibited

ordinary skill to be able to understand

may do so only on your own behalf, and not on behalf of
the Initial developer

and

the code they affect. Such description must be included in
the LEGAL file described
in section 3.4 and must be

source

fee for, warranty, support,

then you

imum extent possible; and (b) describe the limitations

you

described

order, or regulation

must: (a) comply with the terms of this license to the max-

where a user would be likely to look for such a

notice.

3.6.

Larger works.

to section 3.4(a) above, contributor believes that contributor's

conveyed
3.5.

pursuant

time to time. Each version will be given a distinguishing
version number.

versions.

covered code in executable form only if
of section

5.1-5.5

have been met for

6.2.

Effect of new versions.

that covered code, and if you include a notice stating that
the source code version of the covered code is available

version of the license, you may always continue

under the terms of this license, including

under the terms of that version. You may also choose to

how and where you have fulfilled
3.2. The notice

must be conspicuously

notice in an executable
collateral
version

recipients'

code. You may distribute

of covered

of section

included

code or ownership

license of your choice, which may contain

under a particular

version

other

rights relating

of the
than

applicable

license

netscape

published
has the

by netscape.

right to modify

one

the terms

rights

under

terms different

6.3.

Derivative works.
If You create or use a modified

version

of this

license

cutable version does not attempt to limit or alter the recip-

must (a) rename Your
"Mozilla", "MOZILLAPL",

license so that the
"MOZPL", "Netscape",

"NPL" or any confusingly

similar phrase do not appear in

ient's rights in the source code version from the rights set
the executable

ver-

is not already covered code governed

by this license), You
phrases
"MPL",

sion under a different

license you must make it absolutely

your license (except to note that your license differs from

clear that

which

this license) and (b) otherwise make it clear that Your
version of the license contains terms which differ from the

offered

any terms

differ

from

this

license are

by you alone, not by the Initial developer

contributor.
developer

You hereby

agree

and every contributor

by the initial developer

indemnify

for any liability

or such contributor

any such terms You offer.

to covered code created under this license.

(which you may only do in order to apply it to code which

in this license. If you distribute

Z
C7

the executable

from this license, provided that you are in compliance with
the terms of this license and that the license for the exe-

forth

to use it

use such covered code under the terms of any subsequent

in any

version, related documentation

in which you describe

to the covered

a description

the obligations

Once covered code has been published

or any

the

initial

incurred

as a result of

Mozilla Public license and netscape Public License. (Filling
in the name of the initial developer, original code or contributor in the notice described in exhibit A shall not of
themselves be deemed to be modifications

of this license.)

147

Z DISCLAIMER OF WARRANTY.
COVERED

such participant

CODE IS PROVIDED

UNDER THIS

ON AN "AS IS" BASIS, WITHOUT
KIND,

EITHER

WITHOUT

sold, distributed,

INCLUDING,

THE ENTIRE RISK AS TO THE QUALITY

or had made, modifications

made by

that participant.

COVERED

CODE

8.3.

AND PERFOR-

MANCE

SHOULD

ANY COVERED CODE PROVE DEFECTIVE IN

IS WITH

YOU.

infringement

claim against partici-

such participant's

directly or indirectly

contributor

initiation

version

infringes any patent where such claim

is resolved (such as by license or settlement)
of patent

infringement

litigation,

prior to the
then the rea-

sonable value of the licenses granted by such participant
under sections 2.1 or 2.2 shall be taken into account in

ANY OTHER CONTRIBUTOR)
ASSUME THE COST OF
ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
THIS DISCLAIMER OF WARRANTY CONSTITUTES
AN
ESSENTIAL PART OF THIS

If you assert a patent
pant alleging that

ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR

determining
license.

the

amount

or value of

any payment

LICENSE. NO USE OF ANY

COVERED CODE IS AUTHORIZED

HEREUNDER EXCEPT

UNDER THIS DISCLAIMER.

8.4.

In the event of termination

under

sections

8.1 or 8.2

above, all end user license agreements (excluding distributors
and resellers) which

8. TERMINATION.

8.1.

are

WARRANTIES THAT THE COV-

ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT
FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
THE

under sections 2.1 (b) and 2.2(b)

revoked effective as of the date you first made, used,

WARRANTY OF ANY

EXPRESSED OR IMPLIED,

LIMITATION,

LICENSE

any distributor
termination.

have been validly granted

hereunder

prior to termination

by you or
shall survive

This license and the rights granted hereunder will terminate
automatically

if you fail to comply with terms herein and

fail to cure such breach within
of the breach. All sublicenses
are properly

30 days of becoming aware
to the covered code which

granted shall survive any termination

license. Provisions which, by their
effect beyond the termination

of this

nature, must remain in

of this license shall survive.

9. LIMITATION

OF LIABILITY.

UNDER NO CIRCUMSTANCES

AND

UNDER NO LEGAL

THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),
CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
DEVELOPER, ANY OTHER CONTRIBUTOR,
TRIBUTOR

OF COVERED CODE,OR

OR ANY DIS-

ANY SUPPLIER OF

ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
8.2.

If you initiate litigation
claim (excluding
tial developer
contributor

declatory

Z
C7
X

actions)

(the initial

against

ini-

developer

against whom you file such action

infringes

is referred

alleging that:

(a) such participant's
rectly

judgment

or a contributor

to as "Participant")
-O
-O

by asserting a patent infringement

contributor
any patent,

TIAL DAMAGES OF ANY CHARACTER INCLUDING,
OUT LIMITATION,

version directly or indi-

WITH-

DAMAGES FOR LOSS OF GOODWILL,

WORK STOPPAGE, COMPUTER
TION,

FAILURE OR MALFUNC-

OR ANY AND ALL OTHER COMMERCIAL

DAM-

AGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE
BEEN INFORMED OF THE POSSIBILITY OF SUCH DAM-

any and all rights

AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY

to you under sections 2.1

TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT

then

granted

by such participant

and/or

2.2 of this license shall, upon 60 days notice

from Participant terminate prospectively, unless if within

APPLICABLE LAW PROHIBITS SUCH LIMITATION.

60 days after receipt of notice you either: (i) agree in
writingto pay participant a mutually agreeable reasonable

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-

royalty for your

AGES, SO THIS EXCLUSION AND LIMITATION MAY NOT
APPLY TO YOU.

past and future

made by such participant,

use of modifications

or (ii) withdraw your litigation

claim with respect to the contributor
royalty

and

payment

arrangement

SOME

version against

such participant. If within 60 days of notice, a reasonable
are not

mutually

10. U.S. GOVERNMENT

END USERS.

The covered code is a "commercial

item," as that term is
1995),

agreed upon in writing

by the parties or the litigation

defined

claim is not withdrawn,

the rights granted

"commercial computer software" and "commercial computer
software documentation,"
as such terms are used in 48

pant to you under sections 2.1 and/or
cally terminate

at the expiration

by partici-

2.2 automati-

of the 60 day notice

period specified above.
(b) any software, hardware, or device, other than such participant's
contributor
Version, directly or indirectly
infringes any patent, then any rights granted to You by

148

ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-

in 48

C.ER. 12.212

C.ER. 2.101

(Sept.

1995).

(Oct.

Consistent

12.212 and 48 C.ER. 22Z7202-1

consisting

with

through

C.ER.

22Z7202-4

(June 1995), all U.S. Government end users acquire
ered code with only those rights set forth herein.

cov-

11. MISCELLANEOUS•

EXHIBIT A -Mozilla

Public License•

This license represents the complete agreement concerning
subject

matter

hereof. If any provision

held to be unenforceable,

of this

license is

such provision shall be reformed

only to the extent necessary to make it enforceable•
License shall be governed

by California

(except to the extent applicable
erwise),

excluding

its

This

law provisions

The contents

of this file are subject to the Mozilla Public License

Version 1.1 (the "license"); you may not use this file except in
compliance with the License• You may obtain a copy of the
license at http://www.mozilla.org/MPL/

law, if any, provides oth-

conflict-of-law

provisions•

With

Software

distributed

under the license is distributed

respect to disputes in which at least one party is a citizen

IS" basis, WITHOUT

of, or an entity

or implied• See the license for the specific

chartered

or registered to do business in

the united states of america, any litigation

relating

to this

on an "AS

WARRANTY OF ANY KIND, either express

rights and limitations

language governing

under the License•

License shall be subject to the jurisdiction of the federal
courts of the northern district of california, with venue
lying in santa clara county, california,
responsible

for costs, including

costs and reasonable
application

attorneys'

with the losing party

without

limitation,

fees and expenses• The

of the united nations convention

on contracts

for the International

sale of goods

Any law or regulation

which provides that the language of

a contract

shall be construed

is expressly excluded•

As between

Portions

Initial

Developer

created

developer

Alternatively,
and the contributors,

each

are Copyright

the contents

terms of the ___

of its utilization

of rights

under

this

above.

and

under the terms of the [__]

to distribute such responsibility on an equitable
herein is intended

or shall be deemed to

any admission of liability•

"[__]

License"),

] license are applicable

license and you agree to work with initial developer
basis• Nothing

Code
(C)

of this file may be used under the

license (the

or indirectly,

constitute

Original

the provisions of [....

contributors

the

party is responsible for claims and damages arising, directly
out

Contributor(s):

FOR CLAIMS•

initial

The
is

against the drafter shall not

apply to this license•
12. RESPONSIBILITY

The Original Code is

court

in which case

instead of those

If you wish to allow use of your version of this file only
license and not to allow others to

use your version of this file under the MPL, indicate your decision
by deleting

the provisions

notice and other

provisions

above and replace

them with the

required by the [__]

license.

If you

do not delete the provisions above, a recipient may use your version
13. MULTIPLE-LICENSED
Initial developer

CODE.

of this file under either the MPL or the [__]

may designate

code as "Multiple-Licensed".

portions

"Multiple-Licensed"

means

that the initial developer permits you to utilize portions
the covered

code under

license."

of the covered
of

your choice of the NPL or the

alternative licenses, if any, specified by the initial developer
in the file described in exhibit A.

NOTE: The text of this exhibit A may differ slightly from the text
of the notices in the source code files of the original code. You
should use the text of this exhibit A rather than the text found in
the original code/source

code for Your modifications•

Z
C7
X

149

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 152
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Sat Jul 17 04:25:21 2010
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

LG 32LG70 User Manual LCD TELEVISION Manuals And Guides L0912228

LG LCD Television Manual L0912228 LG LCD Television Owner's Manual, LG LCD Television installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation