LG 42LB5D User Manual TV LCD Manuals And Guides L1005037
User Manual: LG 42LB5D 42LB5D LG TV LCD - Manuals and Guides View the owners manual for your LG TV LCD #42LB5D. Home:Electronics Parts:LG Parts:LG TV LCD Manual
Open the PDF directly: View PDF 
.
Page Count: 121
| Download | |
| Open PDF In Browser | View PDF |
0
_J
LCD TV
PLASMA TV
OWNER'S MANUAL
LCD TV MODELS
PLASMA TV MODELS
37LBSD
SOPY3D
42LBSD
SOPY3DF
47LBSD
60PY3D
S2LBSD
60PY3DF
47LC7DF
Please read this manual carefully before
your set.
Retain it for future reference.
Record model
number
See the label attached
and serial number
ENERGY
STAR is a set of power-saving
issued by the
Environmental
Protection
U.S.
Agency(EPA).
As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this
product meets the
ENERGY STAR guidelines
for energy efficiency.
of the set.
on the back cover and quote
this information to your dealer
when you require service.
guidelines
operating
WARNING / CAUTION
WARNING / CAUTION
To prevent
fire or shock
this product
hazards,
do not expose
to rain or moisture.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLEPARTS INSIDE. REFERTO
Class B digital
device
This equipment
QUALIFIED SERVICE PERSONNEL.
has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection
against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions,
may cause harmful interference
to radio
communications.
However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment
does cause harmful
interference
to
radio or television reception, which can be determined
by turning
the equipment
encouraged
to try to correct
or more of the following
- Reorient
off and on, the
user is
the interference
by one
measures:
or relocate the receiving antenna.
- Increase the separation
receiver.
between the equipment
and
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected,
-Consult
the
technician
WARNING/CAUTION
TO REDUCE THE RISK OF FIREAND ELECTRIC
SHOCK. DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
Electric Code (U.S.A.). The code provides guidelines
Unauthorized
grounding
of the building,
as practical.
and, in particular,
shall be connected
specifies
to the grounding
as close to the point
radio/TV
Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
Do not attempt
without
written
proper
or an experienced
for help,
This reminder is provided to call the CATV system
installer's attention to Article 820-40
of the National
cable ground
dealer
for
that the
system
of the cable entry
authority
to modify this product in any way
authorization
from LG Electronics.
modification
could
to operate this product
void
the
user's
SAFETY INSTRUCTIONS
IMPORTANT SAFETYINSTRUCTIONS
Important
booklet
safety instructions
or sheet,
supplied
shall be provided
or be located
before
with each apparatus.
any operating
This information
instructions
shall be given in a separate
in an instruction
for installation
for use and
with the apparatus.
This information
shall be given in a language acceptable
The
safety
important
instructions
shall
be entitled
instructions
shall be included
where applicable,
information
may be included
by adding
manufacturer's
option,
placed immediately
a picture
adjacent
"Important
where the apparatus
Safety
Instructions".
and, when used, shall be verbatim
statements
or drawing
to the country
that
after the end of the following
illustrates
the intent
is intended
The
as follows.
to be used.
following
safety
Additional
safety
safety instruction
of a specific
safety
list. At the
instruction
may be
to that safety instruction:
0
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not defeat the safety purpose of the polarized
or grounding-type
plug. A polarized plug has
two blades with one wider than the other. A
grounding
type plug has two blades and a third
grounding
prong, The wide blade or the third
prong are provided for your safety. If the provided
O
Do not use this apparatus
plug does not fit into your
near water.
outlet,
consult
an
electrician for replacement of the obsolete outlet.
Clean only with dry cloth.
O
Protect the power cord from being walked on
or pinched
particularly
at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Do not block
openings.
Install in
accordance
withany
theventilation
manufacturer's
instructions.
Only use attachments/accessories
the manufacturer.
specified by
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including
amplifiers)that
produce
heat.
Unplug this apparatus
periods of time.
2
when unused for long
O
Use only with the cart, stand, tripod,
or table specified
with the apparatus.
caution
when
combination
bracket,
by the manufacturer,
of the appliance,
or sold
When a cart is used, use
moving
the
and have the cord replaced
with an exact replacement part by an authorized
servicer. Protect the power cord from physical
cart/apparatus
or mechanical
to avoid injury from tip-over.
kinked,
upon.
abuse, such as being
pinched,
closed
Pay particular
outlets,
twisted,
in a door, or walked
attention
to
plugs, wall
and the point where the cord exits the
appliance.
$3125A
Never touch this apparatus
a thunder
O
or lighting
or antenna
during
storm.
Do not allow a impact shock or any objects
fall into the product,
0
Outdoor
use marking :
WARNING
- To reduce the risk of fire or elec-
tric shock, do not expose this appliance to rain
or moisture.
to
and do not drop onto the
screen with something.
®
Refer all servicing to qualified
Servicing
is required
service personnel.
when the apparatus
has
been damaged in any way, such as power-supply
cord
or
plug
is damaged,
liquid
has been
0
spilled or objects have fallen into the apparatus,
the apparatus has exposed to rain or moisture,
does
not
operate
normally,
or
has
Wet Location Marking
exposed
objects
to
dripping
: Apparatus
or
shall not be
splashing
and
no
filled with liquids, such as vases, shall
be placed on or over apparatus.
been
dropped.
GROUNDING
®
CAUTION
concerning
Ensure that you connect the earth ground wire
the Power Cord :
Most appliances
recommend
they
upon a dedicated
circuit; that is, a single outlet
to prevent possible electric
be placed
methods
electrician
circuit which powers only that appliance and
has no additional outlets or branch circuits.
Check the specification
manual to be certain.
Do not overload
Overloaded
possible,
have a qualified
install a separate circuit
frayed
power
cords,
or damaged
it
to telephone wires, lightening rods, or gas pipes.
wall
Power
Supply
outlets, loose or damaged wall outlets, extension
cords,
breaker.
Do not try to ground the unit by connecting
page of this owner's
wall outlets.
are not
shock. If grounding
_
or
Breake
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically
examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use
0
DISCONNECTING
Mains
DEVICE
FROM
plug is the disconnecting
MAINS
device. The
plug must remain readily operable.
3
CONTENTS
WARNING / CAUTION
SAFETY INSTRUCTIONS
............................ 1
.......................... 2
Input Label .....................................................
44
Key Lock .........................................................
45
Entry Modes ...................................................
46
Photo List .......................................................
47
Music List .......................................................
51
FEATURE OF THIS TV ............................... 6
Accessories ......................................................
7
Front Panel Information .....................................
8
Back Panel Information ....................................
10
Stand Installation ............................................
12
Not using the desk-type stand ........................ 13
Swivel Stand ....................................................
13
Picture Size (Aspect Ratio) Control .................. 53
Back Cover for Wire Arrangement ..................... 14
Preset Picture Settings
Attaching the TV to a Wall ...............................
16
- Picture Mode - Preset ...............................
54
Desktop Pedestal Installation ............................
17
- Color Tone - Preset ...................................
55
VESA Wall Mounting ........................................
17
Antenna or Cable Connection .......................... 18
Manual Picture Adjustment
- Picture Mode - User Mode ........................ 56
- Color Tone - User Mode ...........................
EQU
57
XD - Picture Improvement Technology ............. 58
ENTSETUP
Advanced - Cinema 3:2 Pulldown Mode ........... 59
HD Receiver Setup .........................................
19
Advanced - Black (Darkness) Level................... 60
DVD Setup .....................................................
22
Picture Reset ..................................................
VCR Setup .....................................................
24
Image Sticking Minimization (ISM) Method ....... 62
Other A/V Source Setup .................................
26
Low - Power Picture Mode ...............................
63
PC Setup ........................................................
27
Front Display ..................................................
64
USB In Setup ..................................................
32
Audio Out Setup ............................................
33
61
Auto Volume Leveller (Auto Volume) ................ 65
Remote Control Functions ...............................
34
Turning On TV ................................................
Channel Selection ...........................................
36
36
Volume Adjustment .........................................
On-Screen Menus Selection .............................
36
37
38
- Add / Delete Channel (Manual Tuning) ...... 39
Balance ..........................................................
68
TV Speakers On/Off Setup ..............................
69
Stereo/SAP Broadcasts Setup .......................... 70
71
On-Screen Menus Language Selection .............. 72
Caption Mode ................................................
73
40
- Analog Broadcasting System Captions ....... 74
Input List ........................................................
41
- Digital Broadcasting System Captions ........ 75
SimpLink .........................................................
42
- Caption Option
- Channel Editing ........................................
4
Sound Setting Adjustment - User Mode ........... 67
Audio Language ..............................................
Channel Setup
- Auto Scan (Auto Tuning) ...........................
Preset Sound Setting (Sound Mode) ................ 66
.......................................
76
ClockSetting
- AutoClockSetup....................................
77
- Manual
ClockSetup.................................
78
Auto On/Off Time Setting ..............................
79
Sleep Time Setting ..........................................
80
Auto Shut-off Setting .......................................
81
Set Password & Lock System ...........................
82
Channel Blocking ............................................
84
External Input Blocking ....................................
84
Movie & TV Rating .........................................
85
Troubleshooting ..............................................
Maintenance ...................................................
88
90
Product Specifications .....................................
91
Programming the Remote Control ................... 93
IR Codes .......................................................
97
External Control Through RS-232C .................. 99
Open Source License .....................................
106
S
FEATURE OF THIS TV
SRS(_O)
_._ _
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated
.......
aa
under
Manufactured
"Dolby
D I G I T A L
under license from Dolby Laboratories.
"and the doub[e-D
symbol are trademarks
of
Do[by Laboratories.
license from SRS Labs, Inc.
FULLHD 3
IOBOP
LG TV with this logo displays Full HD (high-definition)
1080p native resolution by receiving and processing a
High-definition
television. High-resolution
vision broadcast
Full HD 1080p signal.
roughly
a million
and playback
or more
screens, and AC3 digital
LG TV with this logo can play MP3 music from a MP3
,_
(S/ITIPLInK
of
pixels, 16:9 aspect-ratio
audio. A subset
of digital
television, HDTV formats include 1080i and 720p resolutions.
player, such as iPOD, and JPEG images from a digital
camera through
digital tele-
system composed
the USB device.
With HDMI CEC support of LG's audio/video device
connected to the HDMI (high-definition
multimedia
_l_"
_IIIIIIII_TI _
interface), LG TV with this logo works easily with one
remote control.
E N G i N E
quality factors,
devices with one cable and produces the highest quality
It has three HDMI ports that connect audio and video
digital images and sound.
EY________
n.t_.ig_.t
adjusts the picture to fit room atmosphere.
LG's own special digital image generator, consisting
a full digital image processor, six different
of
main picture
LG TV with this logo has ambient light sensor that
[_X_
FOR LCD TV
If the TV feels cold to the touch, there may be a small "flicker" when it is turned on. This is normal, there is
nothing wrong with TV.
""_Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they
have no adverse effect on the monitor's performance.
""_Avoid touching the LCD screenor holding your finger(s) against it for long periods of time. Doing so may produce
some temporary distortion effects on the screen.
On Disposal
a. The fluorescent
lamp used in this product
b. Do not dispose of this product
c. Disposal
6
of this product
contains
a small amount
with general household
of mercury.
waste.
must be carried out in accordance to the regulations of your local authority.
PREPARATION
ACCESSORIES
Ensure that the following
accessories
the dealer where you purchased
User must use shielded
compliance
are included
with your product.
If an accessory is missing, please contact
the product.
signal interface
cables (D-sub
15 pin cable)
with ferrite
cores to maintain
standard
The accssories
can be different
"O
_o
for the product.
t'rl
from the figures shown here.
_o
©
z
Owner's
Manual
CD Manual
Remote Control,
Batteries
Power Cord
75ohm
Round Cable
* Slightly wipe stained spot on the exterior only with the polishing cloth
for the product exterior if there is stain or fingerprint
on surface of the
exterior.
* Do not wipe roughly when removing stain. Please be cautions of that
Polishing
Cloth
excessive pressure may cause scratch or discoloration.
D-sub 15 pin Cable
Cable Management
Additional
Cover
(Refer to p.13)
3- Bolts
(Refer to p.13)
7
PREPARATION
FRONTPANELINFORMATION
,,,IHere shown may be somewhat
-O
different
from your TV.
""_NOTE: If your product has a protection tape attached, remove the tape.
And then wipe the product with a cloth (If a polishing cloth is included with your product,
use it).
_o
rrl
_o
©
z
Plasma TV Model
Remote Control
Program
Power/Sta
llluminates
Touch Pad
Display
nd by Indicator
llluminates red in standby mode.
white when the set is switched on.
POWER
Button
8
Sensor
MENU
Button
VOLUME
CHANNEL
(_,_)
(T,A)
Buttons
Buttons
-O
_o
m
LCD TV Model
_o
37/42/47/52LB5D
©
z
(A,V)Buttons
(_1,1_)Buttons
--ENTER
Bu_on
Bu_on
--INPUT
--POWER
Bu_on
Bu_on
47LC7DF
Intelligent Eye
Adjusts picture according to the surrounding
conditions.
Remote Control
Power/Standby
Sensor
Indicator
Illuminates
red in standby
mode.
llluminates
green when the set is switched
on.
9
PREPARATION
BACK PANELINFORMATION
,,,IHere shown may be somewhat different
Plasma TV Model
m
i
©
z
LCD TV Model
10
from your TV.
_D
m
_D
©
z
@ USB INPUT
O HDMI/DVI IN
Connect a HDMI signal to I, 2 or 3.
Or DVI (VIDEO) signal to the I, 2 or 3 port with a
DVI to HDMI cable.
COMPONENT
Connect
jacks.
Power Cord Socket
For operation
Caution:
power.
IN
a component
video/audio
with AC power.
Never attempt
to operate the TV on DC
device to these
RGB (PC)
Connect
the output
from a PC.
AUDIO (RGB/DVI)
Connect the audio from a PC or DTV.
@ REMOTE CONTROL
Connect
PORT
your wired remote control.
RS-232C
IN (CONTROL
Connect
to the RS-232C
O ANTENNA/CABLE
& SERVICE) PORT
port on a PC.
IN
Connect
over-the air signals to this jack.
Connect
cable signals to this jack.
DIGITAL AUDIO
OUT
Connect digital audio to various types of equipment.
Note: In standby mode, these ports do not work.
AUDIO
OUT
Connect analog audio to various types of equipment.
@ AV (Audio/Video)
IN
Connect
audio/video
device to these jacks.
S-VIDEO
Connect
output
from
an
external
S-Video out from an S-VIDEO device.
11
PREPARATION
STAND INSTALLATION (Only
37LBSD)
""_Here shown may be somewhat
m
0
Carefully
place the product
a cushioned
different
from your TV.
screen side down on
surface that will protect
product
and
screen from damage.
0
z
Assemble the product
shown.
0
12
stand with the product
Securely install the 4 bolts provided.
as
NOT USING THE DESK-TYPESTAND (For
It is applied to when installing
only the 60PY3D/F
Plasma TV)
model as wall-type.
=O
_o
r_
When not using the desk-type
plied desk-type
stand fixture
stand, install the supprotection
rubber caps
_o
as shown at the figure.
O
z
RUBBER
It is applied to when installing
only the
50/60PY3D,
50/60PY3DF
model as wall-type.
BOLT
To prevent
desk-type
protection
the foreign
materials
from
stand fixture, fix the desk-type
cover(additional
entering
the
stand fixture
cover) by using the sup-
plied bolts as shown at the figure.
ADDITIONAL
SWIVELSTAND (For
After
installing
suit your
Plasma
COVER
TV)
the TV, you can adjust the the TV set manually
viewing
to the left or right
direction
by 20 degrees
to
position.
13
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
,,,IHere shown may be somewhat
different
from your TV.
Plasma TV Model
m
0
Hold the CABLE MANAGEMENT
with both hands and pull it backward as shown.
©
z
45 °
CABLE MANAGEMENT
e
Connect
the cables
as
necessary.
To connect an additional
equipment,
Install the CABLE MANAGEMENT
14
see the EXTERNAL
as shown.
EQUIPMENT
SETUP section.
LCD TV Model
"O
_o
m
O
onnect the cables as necessary.
To connect an additional equipment,
EXTERNAL
0
EQUIPMENT
_o
see the
SETUP section.
Install the CABLE MANAGEMENT
©
z
as shown.
CABLE MANAGEMENT
O
undle the cables using the supplied TWISTER HOLDER.
(This feature is not available for all models.)
TWISTER
HOLDER
1S
PREPARATION
ATTACHING THE TV TO A WALL
,,,IThis feature
is not available for all models.
,,,iHere shown may be somewhat
m
We recommend
different
from your TV.
that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached
potentially causing injury or damaging the product.
©
z
Caution:
Please make sure that children don't
to a wall so it cannot be pulled in a forward
direction,
climb on or hang from the TV.
Plasma TV Model
LCD TV Model
50PY3D/F
60PY3D/F
.............
__iii!_i
_ii!_iiiil
¸I!I!I!I!|||||
|||!
..........
!_
___,
__i_i_iiiiiiii!i
i_i_ii
'iiilili_i!iii
ii!i_ii!
ii_ii_]
i!i_||i_i_i||
i_ili_|iii
i!¸il
i!
/
iiill il_!i_ii _i_!_i
ii!
_
|
_iii!iii!iiiii!_,iii
Insert the eye-bolts
If your product
(or TV brackets and
bolts) to tighten
has the bolts in the eye-bolts
Secure the wall brackets with the bolts
position
(not provided
before inserting
or brackets are tightened
,l_Use a sturdy
to the wall as shown in the picture.
the eye-bolts,
as parts of the product,
the wall. Match the height of the bracket that is mounted
Ensure the eye-bolts
the product
loosen the bolts.
must purchase separately)
on the wall to the holes in the product.
securely.
rope (not provided
as parts of the product,
must pur-
chase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.
16
to
DESKTOP PEDESTALINSTALLATION
For proper
ventilation,
allow a clearance
of 4 inches on all four sides from the wall.
"0
_o
m
Plasma TV Model
LCD TV Model
_o
I4
©
z
4 inches
inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
VESA WALL MOUNTING
This product
There
accepts
4 threaded
a VESA-compliant
holes are available
mounting
for attaching
Plasma TV Model
interface
pad. (optional)
the bracket.
LCD TV Model
(47LBSD,
600
mm
47LC7DF,
S2LBSD: 800
mm)
!iiii_
400 mm
400 mm
17
PREPARATION
ANTENNA OR CABLE CONNECTION
""_Here shown may be somewhat
1. Antenna
m
(Analog
different
from your TV.
or Digital)
Wall Antenna Socket or Outdoor
Antenna without
a Cable Box
Connections.
For optimum picture quality, adjust antenna direction
if needed.
©
z
2. Cable
Wall Jack
:::_
Cable TV
UHF
Antenna
_
VHF
01_
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
18
0_ If the antenna
needs to be split for two TV's, install a 2-Way Signal Splitter.
0_ If the antenna
is not installed properly,
contact
your dealer for assistance.
EXTERNAL EQUIPMENT SETUP
01_
To prevent the equipment damage, never plug in any power cords until you havefinished connecting all equipment.
This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.
HD RECEIVERSETUP
This TV can receive Digital
Over-the-air/Cable
receive digital signals from a digital set-top
When connecting
signals without
an external
box or other digital external
Component
digital
set-top
box. However, if you do
device, refer to the figure as shown below.
cable
1. How to connect
m
x
m
O
Connect
the video outputs
top box to the COMPONENT
(Y, PB, PR) of the digital
IN VIDEO
_D
set
z
>
1 jacks on
the set. Match the jack colors (Y = green, PB = blue, and
XD
ci
PR = red).
m
O
z
onnect the audio output of the digital set-top box to
the COMPONENT
IN AUDIO
1 jacks on the set.
2. How to use
c
m Turn on the digital set-top box.
(Referto the owner'smanualfor the digital set-top box.operation)
Select Component
1 input source by using the INPUT
button on the remote control.
If connected to COMPONENT
Component
2 input source.
IN2 input, select
Y,
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
[[[[[[
CB/PB,
CR/PR
15.73
15.73
59.94
60.00
31.47
31.50
59.94
60.00
44.96
45.00
59.94
60.00
ss.72
59.94
33.75
60.00
26.97
2Z00
33.71
33.75
6Z432
6Z50
23.976
24.00
29.97
30.00
59.939
60.00
19
EXTERNALEQUIPMENT SETUP
When connecting
HDMI cable
1. How to connect
m
x
O
onnect the digital set-top
2 or 3 jack on the set.
box to HDMI/DVI
O
No separated audio connection is necessary.
HDMI supports both audio and video.
IN1,
m
_o
z
_>
m
_D
c
"O
m
z
2. How to use
01_
Turn on the digital set-top
box.
m
c
(Refer to the owner's manual for the digital
set-top box.)
"O
01_
Select HDMI1, HDMI2 or HDMI3 input source with using
the INPUT button on the remote control.
HDMI-DTV
20
mode
51.47
59.94
51.50
60.00
44.96
59.94
45.00
60.00
33.72
55.75
59.94
60.00
26.97
2ZOO
33.71
33.75
23.976
24.00
29.97
30.00
6Z432
6Z50
59.939
60.00
When connecting
HDMI to DVI cable
m
x
.-I
m
z
m
XZ)
c
"0
m
z
.-I
m
-4
C
"0
1. How to connect
O
Connect
the DVI output
O
Connect
the audio output
of the digital
of the digital
set-top box to the HDMI/DVI
set-top
box to the AUDIO
IN1,2
(RGB/DVI)
or 3 jack on the set.
jack on the set.
2. How to use
01_
Turn on the digital
01_
Select HDMII,
set-top
HDMI2
box. (Refer to the owner's manual for the digital set-top
or HDMI3
input source with using the INPUT
box.)
button on the remote control.
21
EXTERNALEQUIPMENT SETUP
DVD SETUP
When connecting
Component
cable
1. How to connect
x
0
r_l
Connect
the video outputs
COMPONENT
IN
(Y, PB, PR) of the DVD to the
VIDEO1
jacks on the set.
Match the jack colors (Y = green, PB = blue, and PR = red).
_o
z
r_l
X:)
c
"0
0
Connect
the audio outputs
COMPONENT
of the DVD to the
IN AUDIO1
jacks on the set.
r_l
z
r_l
!!!
!
2. How to use
|
c
"0
01_
Turn on the DVD player, insert a DVD.
01_
Select Component
1 input source by using the INPUT
button on the remote control.
01_
If connected
Component
to COMPONENT
IN
2 input, select
2 input source.
01_
Refer to the DVD player's manual for operating
Component
instructions.
Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component
ports on the TV
Video output ports
on DVD player
22
When connecting with an S-Video cable
1. How to connect
O
onnect
S-VIDEO
the S-VIDEO output
input on the set.
of the
DVD to the
x
r_l
_o
z
e
onnect the audio outputs
input jacks on the set.
of the DVD to the AUDIO
X:)
c
2. How to use
r_l
01_
Turn on the DVD player, insert a DVD.
z
01_
Select AV1 input source by using the INPUT
remote control.
,l_If connected
to AV
IN2,
select AV2
on the
r_l
c
input source.
01_
Refer to the DVD player's manual for operating
When connecting
button
"O
instructions.
HDMI cable
1. How to connect
O
onnect the HDMI output of the DVD to the
HDMI/DVI
IN 1,2, or 3 jack on the set.
e
No separated
HDMI supports
audio connection
is necessary.
both audio and video.
2. How to use
01_
Select HDMI1, HDMI2, or HDMI3 input source by using
the INPUT button on the remote control.
0_Refer to the DVD player's manual for operating
instructions.
23
EXTERNALEQUIPMENT SETUP
VCR SETUP
To avoid picture
noise (interference),
Use the ISM feature
in the Option
of time (Only Plasma TV model).
may remain visible
manufactures
leave an adequate
between
the VCR and TV.
menu to avoid having a fixed image remain on the screen for a long period
If the 4:3 picture
format
on the screen. This phenomenon
warranty
distance
does not cover the product
is used; the fixed images on the sides of the screen
is common
bearing
to all manufactures
and in consequence
this phenomenon.
tWl
x
r_l
_o
z
When connecting
with an antenna
r_l
X_
c
"0
r_l
z
L_
r_l
c
"0
Wall Jack
Antenna
1. How to connect
O
Connect
the RF antenna out socket of the VCR to the ANTENNA/CABLE
e
Connect
the antenna
cable to the RF antenna
IN socket on the set.
in socket of the VCR.
2. How to use
01_
Set VCR output
switch to 3 or 4 and then tune TV to the same channel number.
01_
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.)
24
the
When connecting
with a RCA cable
1. How to connect
O
Connect the AUDIO/VIDEO
VCR. Match the jack colors
jacks between TV and
(Video = yellow, Audio Left
= white, and Audio Right = red)
r'_
x
m
2. How to use
z
01_
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner's manual.)
m
£3
c
"0
01_
Select AV1 input source by using the INPUT
the remote control.
01_If connected
to AV IN2,
select AV2
button on
m
z
input source.
m
c
-0
When connecting
with an S-Video
cable
1. How to connect
Connect
S-VIDEO
the S-VIDEO output
input on the set.
Connect the audio outputs
input jacks on the set.
of the VCR to the
of the VCR to the AUDIO
2. How to use
01_
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
01_
Select AV1 input source by using the INPUT
remote control.
01_
If connected
to AM IN2,
select AV2
button
on the
input source.
25
EXTERNALEQUIPMENT SETUP
OTHERA/V SOURCESETUP
Camcorder
1. How to connect
m
x
m
_o
z
0
Connect
between
the
Video Game Set
AUDIO/VIDEO
TV and external
jacks
equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
m
X:)
c
"0
m
z
2. How to use
01_
Select AV2 input source by using the INPUT
button on the remote control.
m
c
"0
01_
If connected
to AV
IN I input, select AV I
input source.
01_
Operate the corresponding
26
external equipment.
PC SETUP
This TV provides
Plug and Play capability,
When connecting
meaning
that the PC adjusts
automatically
to the TV's settings.
D-sub 15 pin cable
I'i"l
x
-I
I""i'l
1. How to connect
z
O
Connect the RGB output of the PC to the RGB (PC)
jack on the set.
O
Connect
output
(RGB/DVI) the PC
jackaudio
on the
set. to the AUDIO
I""l'l
_D
c
I""i'l
z
-I
!.#'l
I""l'l
c
2. How to use
01_
Turn on the PC and the TV.
01_
Select RGB-PC input source by using the INPUT
on the remote control.
button
27
EXTERNALEQUIPMENT SETUP
When connecting
HDMI to DVI cable
m
x
3
m
_o
z
2
m
X:)
c
"O
m
z
m
c
"O
1. How to connect
O
O
Connect
the DVI output
of the PC to the HDMI/DVI
Connect
the PC audio output
to the AUDIO
(RGB/DVl)
IN1,2
or 3 jack on the set.
jack on the set.
2. How to use
01_
Turn on the PC and the TV.
01_
Select HDMI1,
28
HDMI2
or HDMI3
input source by using the INPUT
button
on the remote control.
m
X
-.4
I'1'1
z
r"'-
m
,o
C
Supported
Display
Specifications
I'1'1
z
-'4
RGB-PC,HDMI-PC
m
---I
C
31.468
70.09
31.469
70.08
31.469
3Z500
3Z861
59.94
75.00
72.80
35.156
3Z879
46.875
48.077
56.25
60.31
75.00
72.18
48.363
56.476
60.023
60.00
70.06
75.02
4Z776
59.87
* RGB-PC mode only
63.981
79.976
60.02
75.025
4Z712
60.015
75.00
60.00
6, o
60oo
29
EXTERNALEQUIPMENT SETUP
Screen Setup for PC mode
Overview
When
the
RGB input,
of the
set
is connected
Output, Select RGB-PC with using the INPUT
remote control.
m
x
When you change the resolution,
in present
to
button
a PC
on the
select the proper resolution
input to see the best picture
appearance.
_o
z
X:)
c
z
Press
the the
MENU
button menu.
and then use A or •
to
select
PICTURE
button
c
"O
Press
I_ button
select the
Screen.
Press the I_
menu.
button
and then use A
to enter
or •
button
to
the screen adjustment
@@
3O
Adjustment
and Phase
for screen Resolution, Position, Size,
Use • or •
Phase.
button to select Resolution,
Position,
x
Size, or
m
_D
z
0
Press the ENTER button and then use •
button to make appropriate
The Phase adjustment
The Size adjustment
•
m
",11I_
adjustments.
@@@
range is -16 ~ +16.
Resolution XGA (1024,
range is -30 ~ +30.
This function
0
1280, 1360) isn't
distinguished because of having
the same H/V Sync Time.
is you to select the
Default Sync Time.
Press the ENTER button.
Position
XD
c
m
z
m
c
This function is to adjust picture
to left/right and up/down as you
prefer.
Size
This function is to minimize any
vertical bars or stripes visible on
the screen background. And the
horizontal
screen size will also
change.
Phase
This function
allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
Initializing (Reset to original factory values)
To initialize
O
se •
the adjusted
or •
values.
button to select Reset.
O
Press the ENTER button
select Yes.
O
Press the ENTER button.
and then
use _1 or I_ button
to
@@@
31
EXTERNALEQUIPMENT SETUP
USB IN SETUP
O
or
m
x
m
_o
z
m
XD
c
m
z
m
c
1. How to connect
"0
Connect the USB device to the USB
on the side of TV.
IN (or USB)
jack
2. How to use
mAfter connecting
MEDIAHosT
32
the USB
function.
IN (or USB)
(_ p.46)
jack, you use the
AUDIO OUT SETUP
Send the TV's audio to external
audio equipment
via the Digital
Audio
Output
(Optical)
port°
Analog
1. How to connect
r'_
x
m
O
Connect audio outputs to the TV's AUDIO OUT jacks.
z
m
O
Set the "TV Speaker option - Off" in the AUDIO menu.
(@ p.69). See the external audio equipment instruction
manual for operation.
c
m
z
m
Digital
c
1. How to connect
ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i
O
Connect one end of the optical or coaxial cable to the TV's
OPTICAL or COAXIAL port of DIGITAL AUDIO OUT.
Connect the other end of the optical or coaxial cable to the
digital audio input on the audio equipment.
0
Set the "TV Speaker option
- Off"
in the AUDIO
p.69). See the external audio equipment
for operation.
instruction
menu. (_
manual
33
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control,
MEDIAHosT
mode control
buttons
VCR/DVD
buttons
MENU
Controls
Control
aim it at the remote control
the
sensor on the TV.
MEDIAHosT mode.
video cassette recorders
or DVD players.
Displays the main menu.
_h
BRIGHT +/-
Adjust brightness
on screen.
z
<
N
I
>
z
z
THUMBSTICK
(Up/Down/Left
Right/ENTER)
©
menus and adjust the system set-
tings to your preference.
EXIT Clear all on-screen
displays and return to TV viewing from
any menu.
fT1
N
©
Z
Navigate the on-screen
TIMER Select the amount of time before your TV turns off automatically._
p.80
RATIO Change the aspect ratio. _ p.53
SIMPLINK See a list of AV devices connected
When you toggle
to TV.
this button, the SimpLink
menu appears
at the screen. _ p.43
VOLUME UP Increase/decrease
/DOWN
the sound level.
MUTE Switch the sound on or off. _ p.36
FAV Scroll through the programmed
Favorite channels. _ p.40
CHANNEL
Select available channels.
UP/DOWN
NUMBER button
BACK Tune to the last channel viewed.
-- (DASH)
Used to enter a program
number for multiple
program channels such as 2-1,2-2,
34
etc.
POWER Turns your TV or any other programmed equipment on or off, depending on the mode.
TV INPUT
In AV 1-2, Component 1-2, RGB-PC,HDMI1, HDMI2 and HDMI3 input sources, screen returns to
the last TV channel.
INPUT
External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC,
HDMI1, HDMI2, HDMI3 (AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 input sources
are linked automatically, only if these are connected).
MODE
Select the remote operating
mode: TV, DVD, VCR, AUDIO,
or STB.
* If the mode of another product is selected, a button on the remote control
the selected product can control the TV.
MEDIAHosT
which is not used
for
N
-r"
z
Enter to the MEDIAHOSTmode.
Inside the Sliding Cover
<
PICTURE
Adjust the factory preset picture depend
on the viewing environment. _ p.54
SOUND
Select the appropriate type of sound for
SAP Select MTS sound: Mono, Stereo, and SAP
analog mode. Change the audio language
DTV mode. _ p.70
Select the Caption
On/Off.
MARK Enter the selected functions.
--
fT1
N
©
Z
type of program. _ p.66
CC
N
-r
>
Z
Z
©
_ p.73
_ p.48
USB EJECT Remove the USB device. _ p.46
35
WATCHING TV / CHANNEL CONTROL
TURNING ON TV
@
First, connect
power cord correctly.
At this moment, the TV switches to standby mode.
0,_In standby
button
mode to turn TV on, press the
V), Number
@
(0~9)
<
INPUT,
CH (A or V)
Select the viewing
remote control.
CH(A
or
button on the remote control.
source by using the TV INPUT, INPUT
01_
This TV is programmed
--rz
(b/l,
on the TV or press the POWER_ INPUT, TV INPUT,
button
on the
to remember which power state it was last set to,
even if the power cord is out.
O
When finished using the TV, press the POWER button
trol. The TV reverts to standby mode.
on the remote con-
N
I
>
z
z
fT1
N
©
Z
©
CHANNEL SELECTION
O
Press the CH (A
or V)
or NUMBER
buttons to select a channel number.
VOLUMEADJUSTMENT
Adjust
the volume
to suit your personal
O
Press the VOL (A or V)
preference.
button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
O
36
You can cancel the Mute function
button.
by pressing the MUTE or VOL (A or V)
i
_'_!i_ii_'i_!!_!_i_!_'i_i!
_'
ON-SCREENMENUSSELECTION
Your TV's OSD (On Screen Display)
may differ
slightly
@
Press the MENU button and then use A or •
@
Press the I_ button
and then use A •
from what is shown in this manual.
button to select the each menu.
_1 I_ button to display the available menus.
SETUP
PICTURE
"1z
<
N
I
>
z
z
r_l
N
0
Z
It
LOCK
For USA
For Canada
AUDIO
It
OPTION
TIME
It
_m
0
It
Only Plasma TV model
37
WATCHING TV / CHANNEL CONTROL
CHANNELSETUP
Auto Scan (Auto
Automatically
finds
or cable inputs,
list.
Tuning)
all channels
and stores them
available
through
in memory
antenna
on the channel
Run Auto Tuning again after any Antenna/Cable
connection
changes.
A password
is required
to gain access to Auto Tuning menu
if the Lock System is turned
on.
"-r"
z
<
N
-r
>
z
z
fT1
Press the MENU button and then use A or •
to select the SETUP menu.
Press the I_ button and then use A or •
select Auto Tuning.
button
button to
N
©
Z
©
Press the ENTER button to begin the channel search.
Allow Auto Tuning to complete the channel search
cycle for ANTENNA
38
and CABLE.
Add/Delete
A password
Channel
is required
(Manual
to gain access
Tuning)
to Manual
Tuning
menu if the Lock System is turned
on.
If selecting DTV or CADTV input
on-screen signal strength monitor
signal, you can view the
to see the quality of the
signal being received.
N
"-iz
Press
the the
MENU
button
to
select
SETUP
menu.and then use •
Press the I_ button and then use •
select Manual Tuning_
or •
button
<
N
-r
>
z
z
or • button to
fT1
N
©
Z
O
ress the I_ button and then use • or •
select TV, DTV, CATV, and CADTV.
button to
@
Press the I_ button
button
O
Press the ENTER button to add or delete the channel.
and then use •
or •
©
to
select channel you want to add or delete.
Press EXIT button
to return to TV viewing or press
MENU button to return to the previous menu.
@@@
39
WATCHING TV / CHANNEL CONTROL
Channel
Editing
From the default
channel
channel
list created
from
the Auto Tuning
search, you can create two different
nel lists in memory:
"custom
list" and "favorite
types of chanchannel
list".
A custom list can be created by toggling each channel on or
off with ENTER button. The channels in the Custom List are
displayed
Custom
N
-r"
z
in black
the
channels
deleted
from
in gray. Once a channel
You can create your
own Favorite
control
the
is high-
lighted you can add or delete the channel by referring
small window at the top-left
corner of the screen.
on the remote
<
and
List are displayed
to the
List. Use the FAV button
when a channel
then add or delete the channel to/from
is highlighted
your
Favorite
and
List.
N
I
>
z
z
fT1
N
©
Z
Press the MENU button and then use A or • button to
select the SETUP menu.
©
Press the I_ button and then use A or • button to
select Channel Edit.
@
Press the I_ button. You will now see a screen filled with
@
Use A •
channel numbers and a preview picture.
_ I_ button to select a channel and then use
the ENTER button
to add or delete it. Press FAV button
to add the channel to the Favorite List. The surfing icon
will appear in front of that channel number.
Press EXIT button
to return to TV viewing or press
MENU button to return to the previous menu.
O0
4O
INPUT LIST
Press the INPUT
button to display
connected
to the unit, on screen.
Press the ENTER
external
source.
device.
button
external
device that
to change the input
Use the A
or •
button
is
to the active
to select the input
ii
i_
N
"lz
@
If all external input sources are connected:
IAoteooa
I-I Cab,e
I--I
<
Av1I -- I Av2I -- It°raP
ooeotl
I
!
@
!
N
-r"
>
Z
Z
I "°_'_I- I "°_'_I -I "°_'_I -I _-_ I -I _o_ooeo_
I
fT1
If no external input sources are not connected:
_m
I _o"ooa
I --
N
0
Z
0
I _ab,e
I
If there is any external input source connected:
(ex: When connected only to AV 2)
I Aoteooa
I-I Cab,e--I
t
Antenna:
Av2I
J
Select it when watching
the DTV/TV.
Cable: Select it when watching the CADTV/CATV.
AV 1-2: Select it when watching
Component
the VCR or external equipment.
1-2: Select it when using the DVD or the Digital set-top box depend on connector.
RGB-P(_ Select it when using PC depend on connector.
HDMI1-3:
Select it when using DVD, PC or Digital set-top
box depend
on connector.
41
WATCHING TV / CHANNEL CONTROL
,slmPLinK
This operates
only for the devices with the
Please check the
This allows you to control
nected
tional
_ImPLInK
logo.
_,mp-,nK logo.
to the display
and play other
through
HDMI
AV devices con-
cable without
addi-
cables and settings.
SimpLink Preparations
Connect the HDMI/DVI IN 1,2 or 3 terminal of the TV
to the rear terminal (HDMI output)
of the Simplink
device with the HDMI cable.
-r"
z
After
connecting
the HDMI jack for the home theater
<
with simplink function in the above method, connect
the DIGITAL AUDIO OUT OPTICAL on the back of the
N
-r"
>
Z
Z
TV to the DIGITAL AUDIO
IN terminal
the simplink device with the Optical
on the back of
cable.
fT1
N
0
Z
@
Press the MENU
button and then use •
to select the OPTION
or •
button
menu.
_m
0
@
Press the I_ button and then use •
or • button to
select SimpLink.
Press the I_ button
select On.
and then
use •
or •
button
Press EXIT button to return to TV viewing
MENU button to return to the previous menu.
42
or
to
press
0O
SimpLink
Direct
Functions
Play:
After
connecting
devices and play media without
Select
AV device:
AV devices to TV, you can directly
additional
control
the
settings.
Enables you to select one of AV devices connected
to TV and
play it.
Disc
playback:
Control
,
,
, _,
,_
•
fast reverse, fast forward,
01_
Power
off
connected
AV devices by pressing the _
,
V _I I_, ENTER buttons and buttons for play, stop, pause,
chapter skip.
all devices:
When you power off TV, all connected
devices are turned
off.(This option only applies when the devices are stoped)
_Switch
audio-out:
(A device, which
N
-r"
z
Offers an easy way to switch audio-out.
is connected
to TV through
HDMI
cable
but does not support
<
SimpLink, does not provide this function)
Note: To operate
SIMPLINK,
(_CEC: Consumer
the HDMI
Electronics
cable with _CEC function
should
be used.
N
-r"
>
Z
Z
Control).
fT1
After selecting the TV button of the MODE on the remote control,
press the SlMPLINK
button.
N
0
Z
Use A • _ I_ button to select the desired device and then press
the ENTER button.
Control
_,
connected
_,
,
_m
0
AV devices by pressing the
, ••_1
I_, ENTER
buttons.
@@
SimpLink Menu
@ TV
viewing:
Switch to the previous TV
channel regardless of the current mode.
@
DISC
playback:
Select and play discs.
When multiple discs are available, the titles
of discs are conveniently
bottom of the screen.
@ VCR playback:
nected VCR.
@
HDD
Device
displayed at the
Play and control the con-
Recordings
Selected
playback:
Play and
When no device is connected
(displayed in gray)
control recordings stored in HDD.
@ Audio
Out
Out
to
to
HT
speaker/Audio
TV: Select HT speaker or TV
When a device is connected
(displayed in bright color)
speaker for Audio Out.
43
WATCHING TV / CHANNEL CONTROL
INPUT LABEL
Sets a label to each input
source which is not in use when
you press the INPUT button.
N
-r"
z
<
N
I
>
z
z
fT1
Press the MENU button and then use A or • button to
select the OPTION menu.
Press the I_ button and then use A or • button to
select Input Label.
N
©
Z
©
Press the I_ button and then
select
the
source:
AV1,
Component2,
RGB-PC, HDMI1,
use A
AV2,
HDMI2
or • button to
Component1,
or HDMI3.
Press the _1 or I_ button to select the label.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
44
00O
KEY LOCK
The TV can be set up so that
remote control.
This feature
locking
it can only be used with the
can be used to prevent
out the front
unauthorized
viewing by
panel controls.
This TV is programmed
to remember
which
option
it was
last set to even if you turn the TV off.
N
-r"
z
Press the MENU button and then use A or • button to
select the OPTION menu.
<
N
-r
>
Z
Z
Press the I_ button and then use A or • button to
select Key Lock
fT1
N
©
Z
Press the I_ button and then use A or •
select On or Off.
button to
©
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
0O
45
MEDIAHOST
ENTRYMODES
Media Host Menu
When you connect
displayed,
a USB device or
press the _
this screen is
automatically,_
In USB device, you can not add a new folder
O
button,
or delete the existing foldec
Press the A or V button to select the desired item.
00
Pressthe ENTER button to move to Photo List or Music List of
USB device,
CJ
I
0
.q
46
.......
Press the USB EJECT button of remote control before removing
the USB device
oo©
0
PHOTOLIST
It's available
to playback
the photo
file(*.jpg)
The On Screen Display may be different
in the USB device.
from your
set. Images are an example to assist with the TV operation.
Screen Components
m
Usable USB memory
-10
-.q
@ Current
page/Total
pages
@ Total number of marked thumbnail
photos
@ Corresponding
buttons
on the remote control
47
Photo Selection
and PopUp Menu
As shown, up to 15 thumbnail
photos
are listed
per page.
r11
_D
O
Use the CH A or • button to navigate in the thumbnail photo page.
e
Use the MARK button to mark or unmark a photo.
When one or more photos are marked, you can view
individual photos or a slide show of the marked photos.
If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.
3=
O
-4
o
Use A
•
thumbnail
_II I_
button
photos,
then
show the PopUp
to
navigate the appropriate
press the ENTER
button
to
menu.
_ View : Display the selected item.
_, Mark All:
Mark all photos on the screen.
_ Delete : Delete the selected
_/_Cancel:
O
48
Close the pop-up
Repeatedly,
or press the
menu.
press EXIT
photo item.
menu.
button
to return to TV viewing
button to return to the Media Host
@@
Set up the menu in Full-Sized
You can change the settings
to display
USB device, on a full-sized screen.
Detailed
screen.
O
0
operations
are
Use the CH i
photo page.
Use A
•
thumbnail
available
on
Screen
photos
stored
on a
full-sized
photo
view
or • button to navigate the thumbnail
_1 I_
button
photos,
then
to navigate
m
the appropriate
press the ENTER
button
to
show the PopUp menu.
0
-q
O
se A or • button to Move to the View
press the ENTER button.
O
The selected
photo is displayed
menu, then
in full size.
@@@
_/_Slide
Show:
When no picture is selected, all pho-
tos in the current
folder
are displayed
show. When selected, the selected
during
photos
slide
are dis-
played during slide show. To start slide show, press
ENTER button on
Set the time interval of the slide show in Option.
A slide show continues
for a maximum of 4 hours.
After 4 hours, the slide show will end and go to TV
mode or external
The aspect ratio of a photo may change the size
input mode.
of the photo displayed
_/_BGM: Listen to music while viewing photos
size. To start BGM, press ENTER button on
on the screen in full size.
in full
Set the BGM device and album in Option.
_ _
(Rotate):
Rotate photos.
Rotates the photo 90 °, 180 °, 270 °, 360 ° clockwise upon ENTER
_ Delete:
Delete
select Delete
button on _
photos.
Use _
and press ENTER
(Rotate).
or I_
button
to
button.
49
_/_Option:
Set values for Slide
folder.
Use _
or I_ button
press ENTER
Speed
to select
and Music
Option
and
button.
Use _1 or I_ button and ENTER
ues. Then go to _
button
to set val-
and press ENTER
to save
the settings.
You cannot
change Music
Folder
while BGM is
playing,
_/_Hide:
c_
Hide the menu on the full-sized
or I1_ button to select Hide
"1©
screen, Use
and press ENTER
button,
To see the menu again on the full-sized
screen,
press ENTER
button to display,
-q
0
Use _1 I_ button
Use A •
_1 I_ button
on the full-sized
0
0
to select and control
the menu
screen.
Use EXIT button to go back to the photo list from
the full-sized screen.
Repeatedly,
ing or press
menu,
5O
to select the previous or next photo.
press EXIT
button
to return to TV view-
button to return to the Media Host
MUSIC LIST
Purchased music files (*.MP3) may contain copyright
restrictions.
Playback of these files may not be supported
by this model.
Music file on your
The On Screen
are an example
USB device can be played
Display
may be different
by this unit.
from
your
set. Images
to assist with the TV operation.
m
Screen Components
0
@ Usable USB memory
0
Current
page/Total
pages
Total number of marked music
Current
playing time/Total
play-
ing time
0
Corresponding
remote control
buttons on the
51
Music Selection
As shown,
and PopUp Menu
up to 8 music titles
O
Use the CH •
titles page.
e
Use MARK
or
button
•
are listed per page.
to navigate in the music
button
to mark or unmark a music. When
one or more music files are marked, the marked music
will be played in sequence.
For example, if you want to
listen to only one music repeatedly,
iust mark the music
only and play it. If no music is marked, all the music in
the folder
c_
3:
0
will be played in sequence.
Use • • button to navigate the appropriate
music,
then press the ENTER button to show up the pop-up
menu.
-q
_/_Play
(During
stop): Play the selected
music.
Once a music finishes playing, the next selected one
will be played. When there are no selected music to
play, the
next one
in the
current
played. If you go to a different
ENTER
button,
the current
folder
will
be
folder and press the
music in playback
will
stop.
_/_Stop
music.
Play
(During
playback):
Stop
the
playing
_ Play With
Photo: Start playing the selected
and then move to the Photo List.
_* Mark
(t
music
All: Mark all music in the folder.
_' Delete:
Delete the selected music.
_' Cancel:
Close the pop-up
menu.
Repeatedly, press EXI T button to return to TV viewing
or press
menu.
button
If you don't
playing,
to
return
press any button
the play information
to the
Media
Host
for a while during the
box (as shown in the
below) will float as a screen saver.
The 'Screen Saver'?
Screen saver is to prevent screen pixel damage due to
an fixed image remaining on the screen for a extended period of time.
52
O0O
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is
displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio
on your 16:9 TV, you need to specify how the picture is to be displayed.
_ RGB-PC input source use 4:3 or 16:9 aspect ratio.
O
Press the RATIO button repeatedly to select the desired picture format.
01_
You can also adjust Aspect Ratio in the PICTURE menu.
Set by program
Selects the proper picture proportion to match
the source'simage.
(4:3-_ 4:3)
_h
--H
c
(16:9 -_ 16:9)
m
m
Zoom
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
m
2
Choose Zoom 2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.
16:9
just
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
Following selection will lead to you view the picture of best quality without loss of original picture in high resolution image.
©
z
-q
©
r"
Scan
Notes: If there are noise in original picture, you
can see the noise at the edge.
Just Scan operates only in DTV/CADTV
(720p/1080i/1080p),
HDMI-DTV, DVIDTV input source.
Zoom
1
Choose Zoom 1 when you want to view the picture without any alteration. However, the top and
bottom portions of the picture will be cropped.
53
PICTURECONTROL
PRESETPICTURE SETTINGS
Picture Mode - Preset
Picture Mode adjusts the TV for the best picture appearance.
Select the preset value in the Picture Mode menu based on the
program
category.
Intelligent
Settings
Eye
(LCD TV only),
are preset for the optimum
Dynamic,
picture
Standard,
quality
Mild
at the facto-
ry and are not adjustable.
In the User1
and User2
modes only, user can directly
the contrast, brightness, color, sharpness, tint, bacHight.
O
Press the PICTURE
Intelligent
"O
N
button
appearance setup option
User1
repeatedly
adjust
to select the picture
as below :
Eye (LCD TV only), Dynamic,
(your own settings), and User2
Standard,
Mild,
(your own settings).
C
_o
m
N
©
Z
O
Press the EXIT
button
to save and return to TV viewing.
_o
©
You can also use the PICTURE menu to adjust Picture
54
Mode.
Color
Tone - Preset
Choose one of three automatic
color adjustments.
Set to
warm to enhance hotter colors such as red, or set to cool to
see less intense colors with more blue.
When
selecting
and Mild),
When
Color
selecting
you can choose
Picture
Mode options
Temperature
Picture
is automatically
Mode options
the Color
(Dynamic,
Standard
change.
(User 1 and User 2),
Temperature.
Press
the the
MENU
button menu.
and then use A or •
to select
PICTURE
button
"O
N
C
O
Press the I_ button and then use A or •
select Color
Temperature.
button
_D
to
rT1
N
©
Z
_D
O
Press the I_ button and then use A or • button to
select either Cool, Medium, Warm or User.
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
©
0O
55
PICTURECONTROL
MANUAL PICTUREADJUSTMENT
Picture Mode - User Mode
Adjust
the picture
viewing
situations.
appearance
to suit your
preference
Press the MENU button and then use A or •
to select the PICTURE menu.
and
button
-O
N
--4
C
_o
m
O
Press the I_ button and then use A or •
select Picture Mode.
button to
O
Press the I_ button and then use A or •
select User 1 or User2.
button to
O
Press the I_ button and then use A or • button to
select the desired picture option
(Contrast,
Brightness, Color, Sharpness, Tint, or Back Light
(LCD TV only)).
N
O
Z
_o
O
01_
Back
56
Light
(LCD TV only)
To control
the brightness
brightness
of LCD panel.
of the screen, adjust the
O
ress the I_ button and then
make appropriate adjustments.
use _II or I_ button
to
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
@@
Color
Tone - User Mode
You can also adjust
by selecting
When
the detailed
the Color
selecting
you can choose
Picture
settings
(Red, Green, Blue)
Temperature-User
Mode options
the Color
menu.
(User 1 and User 2),
Temperature.
Press
the the
MENU
button menu.
and then use A or •
to select
PICTURE
button
"O
N
C
O
ress the I_ button and then use A
select Color
Temperature.
or •
O
Press the I_ button
select User.
and then use A
or •
button
to
O
Press the I_ button and then use A
select Red, Green, or Blue.
or •
button
to
O
Press the I_ button
and then use _I or I_ button
to
_D
to
r_
N
©
Z
_D
make appropriate
The adjustment
-20- +20.
O
button
©
00
adjustments.
range of Red,
Green,
or Blue
is
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
57
PICTURECONTROL
XD - PICTURE IMPROVEMENT TECHNOLOGY
XD is LG Electronic's
to display
nal processing
When
picture
Picture
Mode options
XD is automatically
technology
Picture
you can choose
the Auto / Manual.
Mode options
When
selecting
the Manual,
you
Contrast, XD color and XD Noise.
available
to
use this
(Dynamic,
changed
When selecting
It's not
sou rce.
improving
an advanced
digital
sig-
algorithm.
selecting
and Mild),
unique
a real HD source through
Standard,
to Auto.
(User I and User 2),
can
function
adjust
the
in RGB-PC
Press the MENU button and then use A or •
to select the PICTURE menu.
XD
input
button
C
Press the I_ button
select XD.
m
and then
use A
or •
button
to
©
z
©
Press the I_ button and then use _ or I_ button to
select Auto or Manual.
0O
O
58
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
ADVANCED - CINEMA 3:2 PULL DOWN MODE
Set up the TV for the best picture
movies.
When you operate
or Cinema
appearance
Cinema 3:2 Mode (3:2
Correction
Mode),
for viewing
Pull-Down
the TV will
adjust
Mode
24
fps
video from movies to 30 fps video for display.
This feature
operates
only in TV (Analog
TV/CATV,
AV2,
480i/1080i,
and
the the
MENU
button menu.
and then use A or •
toress
select
PICTURE
button
DTV/CADTV),
AV1,
HDM11080i
mode.
O
Component
Digital
('h
C
O
Press the I_ button and then use A or •
select Advanced.
button to
O
Press the I_ button and then use A or •
select Cinema 3:2 Mode.
button to
O
Use "11or I_ button
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
FT1
('h
O
Z
O
to select On or Off.
@@@
59
PICTURECONTROL
ADVANCED-BLACK
Adjusting
the
contrast
and the
(DARKNESS) LEVEL
brightness
of the
screen
using the black level of the screen.
This feature operates
HDMI3 mode.
only in AVI,
AV2, HDMII,
HDMI2,
Press the MENU button and then use A or •
to select the PICTURE menu.
or
button
-O
N
C
_o
m
O
ress the I_ button
select Advanced.
and then
use A
or •
button
to
O
Press the I_ button
select Black level.
and then
use A
or •
button
to
O
Use _I or I_ button to select Low or High.
N
©
Z
_o
©
0_Low
The screen gets darker.
ol_
High
The screen gets brighter.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
60
@@@
PICTURERESET
Use to quickly
reset all the Picture
original
preset values.
O
factory
menu options
to their
Press
the the
MENU
button menu.
and then use A or •
to select
PICTURE
button
"O
N
Press the I_ button and then use A
select Picture Reset
or •
button
C
to
_D
m
N
©
Z
_D
O
Press the I_ button
to original values.
©
to reset the Picture menu options
0O
61
PICTURECONTROL
IMAGESTICKING MINIMIZATION (ISM) METHOD-Plasma
TVonly
A frozen still picture
from a PC/video
screen for prolonged
Use our unique
screen.
periods
method
game displayed
will result
to minimize
in a ghost
on the
image.
any fixed image on the
O
Press the MENU button and then use A or •
to select the OPTION
menu.
e
ress the I_ button and then use A or •
select ISM Method.
button to
O
Press the I_ button and then
select either Normal,
Orbiter,
Wash.
button to
or White
"O
use A or •
Inversion,
button
N
,l_Normal
C
m
If image sticking
N
©
Z
_ Orbiter
©
Orbiter
is never a problem, ISM is not neces-
sary - set to Normal.
may help prevent ghost images. However, it is
best not to allow any fixed image to remain on the
screen. To avoid a ghost
image on the screen, the
image will move once per 2 minutes : Left _
--_Upside
Downside
--_
_
Downside
--_Right
Right
-_Left
--_
Upside.
Inversion
Inversion
will automatically
invert the plasma display
panel color every 30 minutes.
,l_White
Wash
White Wash removes ghost images from the screen.
Use sparingly. Watch the TV normally for a while before
using this feature to see if the ghost image disappears on
its own.
O
62
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
0O
LOW - POWERPICTURE MODE-plasmaTVonly
Low power reduces the plasma display
O
power
consumption.
Press
the the
MENU
button menu.
and then use A or •
to select
OPTION
button
"O
N
Press the I_ button
select Low Power.
and then use A or •
button
C
to
_D
r_
N
©
Z
_D
O
Press the I_ button
select On or Off.
and then use A
or •
button
to
©
01_
When you select On, the screen darkens.
O
Press EXIT
MENU
button
to return
to TV viewing
or press
button to return to the previous menu.
0O
63
PICTURECONTROL
FRONTDISPLAY-Plasma
rv only
Illuminates
plays current
brightly
when the set is turned
on. The LED dis-
TV status.
Press the MENU button and then use A or •
to select the OPTION
menu.
button
"O
N
C
_D
Press the I_ button and then use A or •
select Front Display.
button to
O
ress the I_ button and then use A or •
select Off, Dark or Bright.
button to
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
m
N
O
Z
_D
O
@@@
64
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELLER(AUTO VOLUME)
Scans for changes in sound
levels during
commercials,
adjusts
the specified
audio level.
the sound
to match
Auto Volume makes sure that the volume
sistent
whether
you are watching
level remains
a commercial
then
con-
or a regular
TV program.
O
Press the MENU button and then use A or •
to select the AUDIO
menu.
Press the I_ button and then use A or •
select Auto Volume.
button
button to
0
c
z
O
ress the I_ button
select On or Off.
and then use A
or •
button
_o
to
z
c
O
l'rl
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
N
0
Z
.-I
0
0O
65
PRESETSOUND SETTINGS (SOUND MODE)
Sound
Mode
adjustment
lets you
enjoy the best sound
without
because the TV sets the appropriate
based on the program
Standard,
Music,
any special
sound
options
content.
Movie,
sound
quality
at the factory
O
Press the SOUND
and Sports
are preset
for
button repeatedly to select the appropriate
sound setup as below:
Standard,
Music,
Movie,
Sports,
and User
(your own
settings).
0
C
Z
0
Press EXIT
button to return to TV viewing.
_o
z
c
l'rl
N
0
Z
.-I
0
66
good
and are not adjustable.
0,_Youcan also adjust Sound
Mode
in the AUDIO
menu.
SOUND SETTING ADJUSTMENT- USER MODE
Adjust
the sound to suit your
O
ress the MENU button and then use A or •
to select the AUDIO
menu.
O
Press the I_ button and then use A or •
select Sound Mode.
button to
O
ress the I_ button
select User.
or •
button
to
O
Press the I_ button and then use A or •
select the desired sound option (Treble,
button
Bass,
to
or
Front
taste and room situations.
and then use A
button
Surround).
@@
O
Press the I_ button
make appropriate
and then use _
or I_ button
to
0
c
z
_o
adjustments.
z
c
l'rl
N
0
Z
.-I
0
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
SRS TruSurround
XT
Takes advantage of any multi-channel
format without
needing to add extra speakers or equipment. Dialog clarity,
bass enrichment,
and the addition
of stereo audio
enhancement
produces an immersive
from standard stereo material.
3D
EchoSound
sound
experience
System
Creates a stunning simulated stereo effect from any mono
sound and a realistic three-dimensional
sound with a very
wide and deep sound stage.
67
SOUND & LANGUAGE CONTROL
BALANCE
Adjust the left/right
room situations.
O
sound of speaker to suit your taste and
Press the MENU button and then use A or •
to select the AUDIO
menu.
Press the I_ button and then use A or •
select Balance.
button
button to
O
c
z
_o
O
Press the I_ button and then use _II or I_ button to
make appropriate adjustments.
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
z
c
l'rl
N
0
Z
.-I
0
68
TV SPEAKERSON/OFF SETUP
Turn the TV speakers
Feature turns
off if using external
the TV Speakers option
audio
equipment.
On or Off.
O
Press
the the
MENU
button
and then use A or •
to select
AUDIO
menu.
O
Press the I_ button and then use A or •
button
button to
select TV Speaker.
O
Press the I_ button
select On or Off.
0
c
Z
and then use A
or •
button
to
z
c
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
l'rl
N
0
Z
--4
0
0O
69
SOUND & LANGUAGE CONTROL
STEREO/SAP BROADCASTS SETUP
This TV can receive MTS stereo programs
Audio
tion
Program)
transmits
that accompanies
an additional
and any SAP (Secondary
the stereo
sound
signal
program
one and when you select Stereo or SAP on the remote
Mono
sound
Mono;
even though
Select Mono
areas during
is automatically
received
if the broadcast
control.
is only in
Stereo or SAP has been selected.
if you want to listen to the mono sound
stereo/SAP
in remote
broadcasting.
Stereo or SAP can be received in Analog
O
if the sta-
as well as the original
channel.
Use the SAP button to select your desired MTS mode in
analog signal. Each time you press the SAP button, Mono,
Stereo,
or SAP appear in turn.
01_
If other languages available on the digital signal, select
them with the SAP button.
O
c
Z
0
z
c
l'rl
N
0
Z
.-I
0
7O
Press EXIT
button to save and return to TV viewing.
,,,_,,,,,,,,,,,,?,,,,_,_
..................
AUDIO LANGUAGE
TV iNPUT
-_,
....
INPUT
POWER
/ _
Other
languages may be available if a digital signal is provided
by the broadcasting
This feature
operates
station.
only in DTV/CADTV
mode.
Press the MENU button and then use A or •
to select the OPTION
menu.
O
O
Press the I_ button
select Language.
and then use A or •
Press the I_ button and then use A or •
select Audio.
button
button
to
0
c
z
_o
button to
z
c
O
Use _I or I_ button to select : English, Spanish,
French.
Press EXIT button to return to TV viewing or
MENU button to return to the previous menu.
l'rl
or
press
N
0
Z
.-I
0O
0
71
SOUND & LANGUAGE CONTROL
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected
lan-
guage. First select your language.
O
Press the MENU button and then use A or •
to select the OPTION
menu.
O
Press the I_ button
select Language.
and then
use A or •
button
to
O
Press the I_ button
select Menu.
and then
use A
button
to
O
Use _II or I_ button to select your desired language.
O
c
z
button
_o
or •
z
c
l'rl
N
0
Z
.-I
From this point on, the on-screen
menus will be shown
in the selected language.
0
0O
O
72
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
CAPTION MODE
Caption must be provided to help people with hearing loss watch
TV.
0
Use the CC button to select Caption
When selecting
Digital Option
Press EXIT
Off,
Sub-menus
On or Off.
for Analog, DTV, and
become disabled.
to save and return to TV viewing.
0
c
Z
_o
z
01_Youcan also adjust Caption
in the OPTION
menu.
c
l'rl
N
0
Z
.-I
0
73
SOUND & LANGUAGE CONTROL
%1 INpuT
Analog
Broadcasting
Select a caption
provided
mode for displaying
captioning
information
on the screen and is usually the program's
Caption/Text,
if
provided
available
for
Antenna/Cable.
both
digital
by the
and
broadcaster,
analog
if
at
dialog.
would
be
on
the
channels
This TV is programmed to memorize the caption/text
which was last set when you turn the power off.
mode
This function
On.
is set
is only
INPUT
System Captions
on a program. Analog caption displays information
any position
_,_,
available
when Caption
Mode
O
ress the MENU button and then use A or •
to select the OPTION
menu.
O
Press the I_ button
select Caption.
O
ress the I_ button and then use A or •
select Analog.
O
Use_ orl_ button to select CCl,
Textl, Text2, Text3 or Text4
button
O
c
z
_o
and then
use A
or •
button
to
z
c
l'rl
button to
N
0
Z
.-I
_D
0
CC2, CC3, CC4,
o,_
CAPTION
The term for the words that scroll across the bottom of
the TV screen; usually the audio portion
of the pro-
gram provided for the hearing impaired.
@@@
01_
TEXT
The term for the words that appear
in a large black
frame
screen; usually
and almost
messages provided
cover the entire
by the broadcaster.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
74
TV ENPUT
-_,
....
INPUT
POWER
/ _
Digital
Choose
Broadcasting
the language
to appear
you
System Captions
want the DTV/CADTV
Captions
in.
Other Languages can be chosen for digital
they are included on the program.
This function
On.
in only available
sources only if
when Caption
Mode
Press
the the
MENU
button menu.
and then use A or •
to select
OPTION
O
O
ress the I_ button
select Caption.
and then use A
Press the I_ button
select Digital.
and then use A
or •
is set
button
button
to
0
c
z
or •
button
to
z
c
O
Use _I or I_ button
to select Servicel
~ Service6.
l'rl
N
0
Z
.-I
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
0
@@@
7S
SOUND & LANGUAGE CONTROL
%1 INpuT
_,_,
INPUT
Caption Option
Customize
screen.
the DTV/CADTV
This function
On.
in only
captions
available
that
appear
when Caption
on your
Mode
O
the the
MENU
button menu.
and then use A or •
toress
select
OPTION
O
Press the I_ button
select Caption.
is set
button
and then
use A
or •
button
to
Press the I_ button and then
select Digital
Option.
use A
or •
button
to
O
Press the I_ button
select Cu store.
use _I or I_ button
to
O
Use A or •
O
c
Z
_o
and then
z
c
l'rl
N
0
Z
.-I
button to customize the Style,
Font,
etc.,
to your preference.
A preview icon is provided
use it to see the caption
at the bottom
of the screen,
language.
0
@@
01_
Size : Set the word size.
01_
Font : Select a typeface
for the text.
0_Text Color : Choose a color for the text.
01_
Text Opacity
: Specify the opacity for the text color.
01_
Bg (Background)
0_Bg (Background)
the background
Color:
Select a background
Opacity
color.
: Select the opacity
for
color.
01_
Edge Type : Select an edge type.
01_
Edge Color : Select a color for the edges.
@@
O
Press EXIT
MENU
76
button
to return
to TV viewing
or press
button to return to the previous menu.
TIME SETTING
CLOCK SETTING
_V
_N_T
_r
....
INPUT
POWER
/ _
Auto Clock Setup
The time is set automatically
from a digital
The
includes
digital
current
channel
signal
time provided
Set the clock manually
signal.
information
by the broadcasting
if the current
channel
for
the
station.
time is set incorrectly
by the auto clock function.
O
Press the MENU button and then use A or •
to select the TIME menu.
O
Press the I_ button and then use A or •
select Clock.
button
button to
0
c
z
O
ress the
select
Auto.I_ button
and then use A or •
button
to
z
c
O
Press the I_ button and then use A or •
button to
U.S.A:Eastern,
Central,
Alaska or Hawaii.
Mountain,
Canada:Eastern,
Central,
Mountain,
New F.land or Atlantic.
O
Press the I_ button
select Auto,
Off,
and then use A or •
On,
depending
your viewing area observes Daylight
O
l'rl
select your viewing area time zone:
Pacific,
N
0
Z
.-I
Pacific,
0
@0
button
on whether
to
or not
Saving time.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
O0
77
Manual Clock Setup
If the current
time setting is wrong, reset the clock manually.
Press the MENU button and then use A or •
to select the TIME menu.
button
O
Press the I_ button and then use A or •
select Clock.
button to
O
Press the I_ button and then use A or •
select Manual.
button to
O
Press the I_ button
m
m
z
select
either
the
and then
year, date,
selected, use the A or •
use _1 or I_ button
or time
option.
to
Once
button to set the year, date,
and time options.
O0
O
78
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
AUTO ON/OFF TIME SETTING
W INPUT
_,
INPUT
....
POWER
I _
This function
The Off
operates
Time
they are both
only if the current
function
overrides
time has been set.
the On
Time
function
if
set to the same time.
The TV must be in standby
mode for the On Time
If you do not press any button within
turns on with the On Time function,
cally revert to standby
to work.
2 hours after the TV
the TV will automati-
mode.
Press the MENU button and then use A or •
to select the TIME menu.
button
O
ress the I_ button and then use A
select Off Time or On Time.
or •
button
to
O
Press the I_ button
or •
button
to
and then use A
select 0 n.
-I
01_
To cancel the On/Off
time
function,
select Off.
I"1"1
I"1"1
O
Press the I_ button
and then use A or •
button to the
Press the I_ button
minutes.
and then use A or •
button to the
hour.
-I
-I
z
@@@@@
0
Only
On Time
Press the I_ button
and then use A
or •
button
to
select the channel at turn-on.
Press the I_ button
and then use A or •
button to the
sound level at turn-on.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
79
TIME SETTING
SLEEPTIME SETTING
The Sleep Time turns the TV off at the preset time.
Note
that this setting
is cleared when the TV is turned
off.
¢_,,_
0
Press the TI MER button
repeatedly
minutes. First the Off option
to select the number of
appears on the screen, followed
by the following sleep time options
180, and 240 minutes.
: 10, 20, 30, 60, 90, 120,
When the number of minutes you want is displayed on the
screen, press the ENTER button. The timer begins to count
down from the number of minutes selected.
O
Z
To check the remaining minutes before the TV turns off, press
the TIMER button once.
To cancel the Sleep Time, press the TIMER
to select Off.
01_Youcan also set up the Sleep
8O
Time
button repeatedly
in the TIME
menu.
_o_
AUTO SHUT-OFF SETTING
TV ENPUT
-_,
INPUT
....
POWER
I _
TV will be automatically
10 minutes.
turned
off, in case of no signal for
Press
the the
MENU
to select
TIME button
menu. and then use A or •
O
button
Press the I_ button and then use A or •
select Auto Sleep.
button to
Press the I_ button
select On or Off.
button
and then use A
or •
to
m
m
O
Press EXIT
MENU
button
button
to return
to TV viewing
z
or press
to return to the previous menu.
0O
81
PARENTALCONTROL / RATINGS
Parental
Control
can be used to block specific
The Parental Control
Function
sent by the broadcasting
(V-Chip)
station.
channels,
ratings and other
viewing sources.
is used to block program viewing based on the ratings
The default
setting is to allow all programs to be viewed.
Viewing can be blocked by choosing the type of the program and the categories.
ble to block all program viewing for a time period. To use this function,
done :
1. Set ratings and categories
It is also possi-
the following
must be
to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided
by broadcasting
stations.
Most television
programs and television
movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown
at the theaters or direct-to-video
movies use the Movie Rating System (MPAA) only.
Ratings for Television programs including
made-for-TV
0fuf_
TV-G
0fuf_
TV-MA (Mature audience only)
(General audience)
01_
TV-PG (Parental guidance
01_
TV-14
suggested)
(Parents strongly cautioned)
01_
TV-Y
movies-
(All children)
01_
TV-Y7 (Children 7 years older)
_o
z
SET PASSWORD& LOCK SYSTEM
N
O
z
Setting
m
up Your Password
_o
O
Set up blocking
schemes to block specific channels, ratings, and
external viewing sources.
_o
A password is required
to gain access to this menu.
z
c_
O
Press the MENU button and then use the A or •
button to select the LOCK menu. Then, press the I_
button.
01_
Enter the password as requested.
01_
The TV is set up with the initial password "0-0-0-0".
82
For USA
For Canada
Set Password
Change the password
O
O
by inputting
a new password twice.
fter inputting the password, use the A or •
choose Set password.
Press the I_ button
For USA
For Canada
For USA
For Canada
button to
and then choose any 4 digits for
your new password.
As soon as the 4 digits
are entered, re-enter
the same
4 digits on the Confirm.
Then your changed
O
password has been memorized.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
Lock System
Enables or disables the blocking
m
z
scheme you set up previously.
N
©
z
O
After inputting the password, use the A or • button to
choose Lock System.
©
Press the I_ button
select On or Off.
z
and then use the A or •
button to
01_
When you select On, the Lock System is enable.
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
83
PARENTALCONTROL/RATINGS
CHANNEL BLOCKING
Blocks any channels
you do not want your
O
that you do not want to watch or that
children
to watch.
After inputting the password, use the A or •
to choose Block Channel.
button
Press the I_ button. You will now see a screen filled with
channel numbers and a preview picture.
O
se A • _ I_ button to select a channel and then use
the ENTER button to block or unblock it.
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
0O
EXTERNAL INPUT BLOCKING
For USA
_D
m
z
Enables you to select
For Canada
a source to block from the external
source devices you have hooked
up.
N
O
z
_D
O
_D
O
After inputting
choose Input
the password, use the A or •
Block.
button to
O
Press the I_ button and then use the A or •
select a source.
O
se the _ or I_ button
each source.
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
z
to select On
button
or Off
to
on the
0O
84
MOVIE & TV RATING
Movie Rating (MPAA)-
for USA only
Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can
set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that
the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
O
After
inputting
password, use the A or • button to
choose
Movie the
Rating.
O
Press the I_ button and then use the A or •
to select G, PG, PG-I 3, R, NC-I
7 orX.
button
01_
G (General audience)
01_
PG (Parental guidance suggested)
01_
PG-13 (Parents strongly
cautioned)
R (Restricted)
01_
NC-17 (No one 17 and under admitted)
011_
X (Adult only)
mml
Blocking Off (Permits all programs)
If you set PG-13 : G and PG movies will be available,
PG-]3, R, NC-]7 and X will be blocked.
O
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
For USA
Downloadable
_D
Rating
r_l
z
After inputting the password, use the A or •
choose Downloadable
Rating.
O
For Canada
button to
Press the I_ button and then use the
select DimO, Dim l, Dim2, or Dim3.
A or •
button
Press the I_ button and then use the
select D1 L1, D1 L2, or D1 L3.
A or •
button
Press EXIT button to return to TV viewing
MENU button to return to the previous menu.
O
z
_D
O
_D
z
c_
or press
Based on rating table, your TV's OSD (On
Screen Display) may differ slightly from what
is shown in this manual.
85
PARENTALCONTROL/RATINGS
TV Rating Children
Prevents
children
grams, according
from
- for USA only
watching
to the ratings
does not apply to other
certain
limit
children's
TV pro-
set. The children
TV programs.
rating
Unless you block
cer-
tain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.
O
fter inputting the password,
choose TV Rating-Children.
O
Press the I_ button and then use the •
select Age, or Fantasy
use the A or •
button to
or •
button to
or •
button to
Violence.
Press the I_ button and then use the •
select block options.
Age(applies
to TV-Y, TV-Y7)
01_
Fantasy Violence(applies
O
Press EXIT button to return to TV viewing
MENU button to return to the previous menu.
TV Rating General
Based on the ratings,
m
z
N
O
z
O
to TV-Y7)
and your
family
or press
- for USA only
blocks certain
TV programs
that you
do not want to view.
O
fter inputting the password,
choose TV Rating-General.
O
Press the I_ button and then use the •
select Age, Dialogue,
use the A or •
Language,
or •
button to
button to
Sex or Violence.
Press the I_ button and then use the •
or •
button to
select block options.
z
01_
Age(applies
to TV-G,TV-PG,TV-14,TV-MA)
01_
Dialogue-sexual
dialogue
(applies to TV-PG,TV-14)
Language-adult language (applies to TV-PG,TV-14,TV-MA)
01_
Sex-sexual situations
01_
Violence
O
86
(applies to TV-PG,TV-14,TV-MA)
(applies to TV-PG,TV-14,TV-MA)
Press EXIT button to return to TV viewing
MENU button to return to the previous menu.
or press
TV Rating English - for CANADA
Selecting
canadian
english language
only
rating system.
O
After inputting the password, use the A or •
choose TV Rating-English.
button to
O
ress the I_ button and then use the A or • button to
select E, C, C8+, G, PG, 1 4+, 1 8+, or Blocking Off.
01_
E (Exempt)
01_
C (Children)
01_
C8+
(Children
eight years and older)
01_
G (General programming,
suitable for all audiences)
01_
PG (Parental Guidance )
01_
14+ (Viewers 14 years and older)
01_
18+ (Adult
programming)
01_
Blocking Off (Permits all programs)
O
Press EXIT button to return to TV viewing
MENU button to return to the previous menu.
TV Rating French
- for CANADA
Selecting
language
canadian
french
or press
only
rating system.
m
z
O
O
fter inputting the password, use the A or •
choose TV Rating-French.
button to
N
©
z
Press
I_ button
then use1 the
A or 1• 8ans+,
button to
select the
E, G,
8ans+, and
1 3ans+,
6ans+,
or
Blocking
©
off.
01_
E(Exempt)
01_
G(General)
z
01_
8ans+ (General-Not
convenient
01_
1Sans+ (Not convenient
for little children)
for children of 15 years and
younger)
16ans+ (Not convenient
for children of 16 years and
younger)
01_
18ans+ (This programs
is only for adults'
01_
Blocking off (Permits all programs)
O
Press EXIT
MENU
button
to return
to TV viewing
or press
button to return to the previous menu.
87
APPENDIX
TROUBLESHOOTING
Check to see if there is any object between the product
causing obstruction.
and the remote control
Ensure you are pointing the remote control directly at the TV.
Ensure that the batteries
Ensure that the correct
are installed
with correct
remote operating
polarity
(+ to +, - to -).
mode is set: TV, VCR etc.
Install new batteries.
mini
This is normal, the image is muted during the product
contact
-O
-O
m
z
c7
x
process. Please
after five minutes.
mini
Adjust Color in menu option.
mini
Keep a sufficient
distance
between the product
i,i,iTry another channel. The problem
ram,
Are the video cables installed
ram,
Activate any function
properly?
such as an electrical
i,i,iStation
or cable product
experiencing
i,i,iStation
signal is weak, reorient
ram,
Check for sources of possible
I,l_Check antenna
and the VCR.
may be with the broadcast.
to restore the brightness
ram,
Check for local interference
88
startup
your service center, if the picture has not appeared
problems,
of the picture.
appliance
or power tool.
tune to another
antenna to receive weaker station.
interference.
(Change the direction
of the antenna).
station.
mm_
Press the VOL or VOLUME button.
mini
Sound muted? Press MUTE button.
mini
Try another
channel. The problem
mmff
Are the audio cables installed
may be with the broadcast.
properly?
mini
Adjust Balance in menu option.
mmff
A change in ambient
when the product
humidity
is turned
or temperature
may result in an unusual noise
on or off and does not indicate a fault with the
product.
mini
Adjust resolution,
horizontal
frequency,
or vertical frequency.
mini
Check the input source.
i
[
i
&
,ruff
Work the Auto con figu re or adjus t c,o ck, phas e, or H/V p o sit ion. (Option)
re
m
z
x
89
MAINTENANCE
Early malfunctions
enjoy your
Caution:
can be prevented.
Careful
Be sure to turn the power off and unplug
Cleaning
the power
cord before you begin any cleaning.
0
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
water and a little fabric softener
use it to wipe the screen.
screen for a while. Wet a soft cloth in a mixture of lukewarm
or dish washing detergent.
Wring the cloth until it's almost dry, and then
the Cabinet
Extended Absence
90
of time you can
Here's a great way to keep the dust offyour
0i_Please be sure not to use a wet cloth.
z
E:I
X
can extend the amount
the Screen
0i_To remove dirt or dust, wipe the cabinet
"O
"O
cleaning
0
Cleaning
_>
and regular
new TV.
with a soft, dry, lint-free
cloth.
PRODUCT SPECIFICATIONS
The specifications
shown above may be changed without
prior notice for quality improvement.
45.1 x 32.5x ]2.]
inches
53.5 x 35.0 x ]4.6 inches
63.5 x 40.8 x ]Z8 inches
1144.3 x 825.5 x 306.4mm ]360.0 x 88Z0 x 370.0 mm ]613.6 x ]036.8 x 452.0 mm
45.1 x 29.7 x 4.1 inches
53.5 x 32.4 x 3.8 inches
63.5 x 38.2 x 3.9 inches
1144.3 x 754.7 x ]03.0 mm ]360.0 x 822.0 x 95.5 mm ]613.6 x 970.0 x 98.5 mm
70.8 pounds / 32.1 kg
126.8 pounds / 5Z5kg
178.6 pounds / 81.0kg
5Z3 pounds / 26.0 kg
10Z0 pounds / 48.5kg
143.3 pounds / 65.0kg
AC100-240V-
50/60Hz
NTSC-M, ATSC, 64 & 256 QAM
VHF 2-13, UHF 14-69,
CATV 1-135,
DTV 2-69,
CADTV 1-135
75 ohm
32 - 104°F (0 - 40°C)
Less than 80%
m
Z
C7
X
91
36.5 x 2Z3 x 11.1 inches 40.7 x 29.5 x 11.3inches 45.1 x 32.5 x 13.0 inches 50.6 x 35.5 x 14.1 inches
927.0 x 692.8 x 283.2 mm 1033.1 x750.0 x287.6 mm |144.5 x825.6 x 331.0 mm 1284.6 x 901.8 x 356.9 mm
36.5 x 24.8 x 3.5 inches 40.7 x 2Z0 x 3.5 inches 45.1 x 29.7 x 4.1 inches 50.6 x 32.7 x 4.4 inches
92Z0 x 630.0 x 88.0 mm 1033.1 x 6865 x 885 mm 11445 x754.9 x 103.0 mm 1284.6 x 831.6 x 111.5mm
44.1 Ibs / 20.0kg
60.6 Ibs / 27.5kg
82.7 Ibs / 3Z5kg
109.3 Ibs / 49.6kg
35.3 Ibs / 16.0kg
50.7 Ibs / 23.0kg
69.2 Ibs / 31.4kg
89.3 Ibs / 40.5kg
AC100-240V
NTSC-M,
VHF 2-13,
UHF 14-69,
_ 50/60Hz
ATSC, 64 & 256 QAM
CATV 1-135,
DTV 2-69,
75 ohm
32 - 104°F (0 - 40°C)
Less than 80%
-4 - 140°F (-20 - 60°C)
Less than 85%
Z
CJ
X
92
CADTV 1-135
PROGRAMMING THE REMOTE CONTROL
The provided
universal remote control
Note that the remote
may not control
can be programmed
to operate most remote-controllable
devices.
all models of other brands.
Programming a code into a remote mode
It
To find out whether
your remote control
After that, press the POWER button.
need not be programmed.
ming procedures
O
can operate each device without
(such as a VCR) and press the corresponding
programming,
turn on the device
mode button on the remote.
If the device is turned
off and it responds
If not, the remote should be programmed
properly
the remote control
to operate the device. The program-
are explained below.
Press the MENU and MUTE button continuously
device button is illuminated.
at the same time for two seconds; the currently
If you don't press any button for 20 seconds, the light on the mode button will be turned
selected
off. In that case,
you have to repeat from step 2.
O
O
O
Enter the appropriate
light blinks at a time.
code from the code table on the following pages. When pressing the button,
If the device turned off, the programming is successful.
the
ress the MENU button to store the code. After blinking twice, this code is stored.
Test the remote control
functions
to see if the device responds
properly. If not, steps 2-5.
m
z
_D
x
93
Remote Control
Code
VCR
ANAM
_/3D:_DYBAM
_
072
031
033
103
012
023
039
BROKSONIC
035
037
129
CRAG
003
040
135
CURTIS MATHES
031
033
041
DAEWOO
005
007
010
065
108
112
116
DAYTRON
108
DBX
012
023
DYNATECH
034
053
069
101
043
MATSUI
049
051
059
061
138
153
PAN
FISHER
003
008
009
010
FUNAI
034
GE
031
033
063
072
107
109
144
147
132
136
012
045
004
018
026
034
043
063
137
150
031
033
031
033
012
013
015
040
066
101
012
031
033
043
048
050
055
060
MACON
DE
/G
PENTAX
040
024
034
012
023
101
SHARP
031
SHIN
024
SONY
039
043
DESIGN
043
STS
053
054
066
070
074
133
140
145
013
020
031
083
033
PHI
031
034
067
PHILIPS
031
033
034
067
071
101
021
048
PILOT
101
PIONEER
013
D
033
PULSAR
054
SYMPHONIC
034
010
034
TATUNG
039
043
034
039
043
TECHNICS
031
033
070
TEKN_KA
019
031
033
034
THOMAS
034
TMK
006
TOSHIBA
008
013
042
047
059
082
112
131
TOTEVISION
040
101
040
075
145
UN/
020
033
034
VECTOR RESEARCH 012
040
041
062
063
V CTOR
048
107
109
140
144
VlDEO CONCEPTS
012
145
147
VIDEOSONIG
040
WARDS
048
012
013
020
031033
101
106
114
123
053054101
REALISTIC
034
003
008010
014
034
040
148
014
034
046
003
013
017
031
033
024
034040
053054131
0S8
RUNCO
059
TANDY
066
001
106
034
031
013
047
101
033
034
033
043
034
149
RCA
152
040
078
QUASAR
039
017
076
077
014
150
014
052
058
011
034
013
031
057
067
072
130
009
009
101
108
014
003
003
056
013
/A
063
_!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!_ii
94
034
SEARS
048
043
LLOYD
139
151
131
KENWOOD
149
119
129
X
054
117
OPTONICA
INSTANT
081
046
101
Z
073
045
046
N
042
020
037
HITACHI
020
031
013
036
H
-O
-O
m
010
017
MITSUBISHI
N
GO VIDEO
009
111
035
014
014
110
027
010
008
020
034
135
013
013
025
048
003
MINOLTA
031
043
134
064
017
122
125
022
007
134
029
120
102
059
006
115
003
046
NEC
112
113
033
102
MTC
104
109
030
045
043
102
107
031
101
039
040
105
027
MG_
059
EMERSON
SANSUI
032
012 034 039 043
ZENITH
034
048
058
072
056
080
10i
__________________________________________________________________________________
HDSTB
HOUSTON
TRACKER
0SS037039 0S1 PRoS
123
AMPLICA
050
BIRDVIEW
051
126
129
CHANNEL MASTER 013
014
015
018
036
055
008
009
012
077
CH
CITOH
054
ES
DRAKE
HUGHES
JANIEL
104
RCA
066
106
068
060
061
RE_C ST C
SAMSUNG
043
123
028
074
147
108
085
LEGEND
057
SCIENTIFICATLANTA032
LG
001
SONY
103
STARCAST
041
050
145
005
006
007
010
LUTRON
132
011
052
112
116
LUXaR
062
144
MACOM
010
059
141
DXANTENNA
024
046
056
076
ECH
038
040
057
058
M
065
057
093
094
095
096
NEXT WAVE
028
124
097
098
099
100
N
069
070
ELECTRO HOME
FUJITSU
HITACHI
122
PACESKY SATELLITE 143
089
PAN
114
PANSAT
121
PHILIPS
P CO
07q
105
PRESIDENT
PRIMES_R
019
030
017
133
003
021
134
004
022
031
139
059
140
101
016
/G
060
063
125
064
047
057
138
020
124
125
TEECOM
023
026
075
087
088
137
090
107
130
042
043
080
086
_SH
BA
142
102
110
035
SUPER GU DE
UNIDEN
117
027
029
072
057
002
127
016
025
078
079
101
135
_IEWS_R
115
WINEGARD
128
146
ZENITH
081
091
082
120
136
083
084
111
DVD
i-r1
022
020
014
005
006
HARMAN KARDON
..........
.....
027
PANASONIC
o12
LG
001
013
!iiii i
010
016
025
ii!i ilil ii!i!: illi!f!
iiiil i!!i! i _i
iii!ii fill ii
PIONEER
002
005
006
023
011
015
008
017
003
009
ols
004
021
X
007
THOMPSON
005
i
o19 oo8
iiiii ii ii!!!!iiii! i:
026
Z
C7
i
YAMAHA
t',,li
i
iiiiiiiiiiiiiiiiiii:::
009
010
006
018
016
025
oo6
9S
Audio
DENQN
015
07.5
130
143
111
SHERWOOD
005
006
158
!!!i!!,ii_!i!iiii{_iiii_i!_!_iii_i_i_i_i_!i_!i_!i_!i_!i_!i_i!{i
_i_iiiiiii{i!i_{_iiiiiiilJi_i_i_ii_ii!i!iiiiiii_i_,i!i_ii_!i_i
_i_i:i_ii_i_:;i_i_!_!i_!_!_!_:_i_}_!:_!_i_i:i:i:i_!_i_i_i_i_
_i!i!_!ii_!i
_i
_!I!_!_
FAI',I_
071
FINEARTS
i
_
LG(GOLDSTAR)
MARANTZ
022
002
018
020
025
044
045
109
114
034
04i
08i
090
118
126
248
249
162 163
164
165
166
168
169
233
242
136
089 o99
001
021
024
029
049
205
i:i_!iiiiii!iii!!iiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiill ::004015 141
KEC
185 186
187
OPTIMUS
045046
Z
X
INKEL
041
047
056
057
132
133
140
158
TECHNICS
i!!!!!i !{i ilii
050
067
089
170
171
197
206
062
069
215
222
057
058
PENNEY
Pl
104
112
059
042
065
09i
ii5
i22 i49
i5i
115
o8o
i!!
THE
026
145
045
095
231
010
085
106
185
187
237
101
115
128
154
066
092
147 218
142220241251
058
i.s2 155
96
040
048
007 055 064 115
050
r'rl
013
167
{!i
!!!ii!!i!!!!iiii
157
061
088
065
WARDS
089
094
_M
054
151
055
199
IR CODES
1. How to Connect
01_
Connect
your wired remote control
2. Remote Control
0_Output
to the Remote Control
port on the TV.
IR Codes
waveform
Single pulse, modulated with 37917KHz signal at 455KHz
Tc
Carrier frequency
FCAR = 1/TC = fOSC/12
_q
0_Configuration
1 st frame
Duty ratio = T1/TC = 1/3
of frame
Repeat frame
l
[
Repeat
code
4
Tf
0,_
Lead code
1
9 ms
F
[
I
4.5
4
ms
0_Repeat code
-0
-0
r'rl
0.55
z
ms
L_YI
x
9 ms
0_Bit description
i
Bit "0"
!
I o.5oms.
I
1.12ms
01_
Frame interval:
2.24
ms
Tf
The waveform is transmitted as long as a key is depressed.
Tf
®
I
Tf
°1
[_
Tf=108ms
@455KHz
97
TV INPUT
Remote control
Button
INPUT
RemoteControl
Button
POWER
Remotecontrol Button (PowerOn/Off)
RATIO
i E
40
RemoteControl
Remote control
Button
CH V
Remote control
Button
Remote control
Button
A
Remote control
Button
V
Remote control
Button
I_
BRIGHTMENU
BRIGHT+
(Component1
D4
Remote
E9
76
HDMI3
Discrete
Ratio 4:3
Button
Remote €ontrol
Button
Remote control
Button
Remote
Button
77
Ratio 16:9
Discrete
Remote control
5B
OA
Button
EXIT
Remote control Button
SIMPLINK
Remote control
SAP
Remote COntrol Button
Button
Discrete IR Code
Ratio Zoom
Discrete IR Code
POWER ON
Discrete IR code
POWER OFF
Discrete IR Code
(Only Zoom1
C4
Discrete IR Code
(AV2 Input Selection)
98
Mode)
(Only Power On)
(Only Power Off)
BO
Remote C0ntrol Button
BI
i!
8F
7C
Remote control Button
STOP
Remote Control Button
REC
Remote control Button
REW
Remote Control Button
FF
Remote control Button
MEDIA HOST
Remote Control Button
(AV1 input SeleCtion)MARK
AV2
IR Code
(Only 16:9 Mode)
PAUSE
Z
C7
IIR Code
(Only 4:3 Mode)
Control Button
Remote control
IRCode
Discrete I R Code
Control Button
Remote control
InputSelection)
(Component21nputseleCtion)
m
X
COMPONENT2Discrete
RemoteControlButton
CC
_ll
Discrete IR Code
Button
VOL V
FAV
COMPONENT1
Remote control Button
CA
USB EJECT ......
Remote control Button
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C
port
allows you connect the RS-232C
or an A/V control
system)
,l_Note:
on this unit is intended
RS-232C
The instructions
softwa re.
to control
below are provided
input jack to an external control
the TV's functions
device (such as a computer
externally.
to be used with third
to help with programming
party
RS-232 control
software
hardware
or to test functionality
and software.
using telenet
RS-232C Setup
PC
Type of Connector;
D-Sub 9-Pin Male
No connection
RXD (Receive data)
TXD (Transmit
data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
m
z
E_
X
RTS (Ready to send)
CTS (Clear to send)
No Connection
99
RS-232C Configurations
Either cable below can be used.
PC
PC
TV
RXD
TXD
TV
RXD
TXD
TXD
RXD
TXD
RXD
GND
GND
GND
GND
DTR
DSR
DTR
DTR
DSR
DTR
DSR
DSR
RTS
CTS
RTS
RTS
CTS
RTS
CTS
CTS
D-Sub 9
D-Sub 9
D-Sub 9
D-Sub 9
Set ID
Use this function to specify a TV ID number.
Refer to 'Real Data Mapping1 '. _ p.1 03.
O
Press the MENU button and then use A or •
to select the OPTION menu.
O
Press the I_ button
select Set ID.
O
ress the I_ button and then use A or • button to
adjust Set ID to choose the desired TV ID number.
and then use A or •
button
button to
r_l
z
_D
x
The adjustment
O
range of Set ID is 1 -99.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
Communication
01_
Baud rate : 9600
@@
Parameters
bps (UART)
Stop bit : 1 bit
01_
Data length : 8 bits
Communication
code : ASCII code
011_
Parity : None
Use a crossed (reverse) cable.
Command Reference List
01. Power
k
a
0 ~ 1
15. Treble
k
r
O~ 64
S
0 g 64
t
0~
v
0 ~ C8
02. Input Select
k
b
(_ p.102)
16. Bass
k
03. Inpu t Select
x
b
(_ p.102)
1Z Bal
k
04. Aspect Ratio
k
c
(_ p.102)
OS. Screen Mute
k
d
0-1
06. Volume Mute
k
e
0~1
OZ Volume COntrol
k
f
0-
64
k
$
08. Contrast
k
g
0~
64
j
p
09. Brightness
k
h
0-
64
;
q
0-1
10. Color
k
i
0~
64
m
b
0 ~ 1
m
c
(_ p.105)
m
g
0 ~ 64
18. Color Temperature
k
1
k
t
20. Green Adjustment
64
k
0-C8
m
11. Tint
k
j
0-
64
12. Sharpness
k
k
0~
64
13. OSD Select
k
I
0-1
k
rn
0~1
25. Channel Add/Del
[ 2Z Back Light
( ,. p.104)
I
[
l
[
I
f LCD TV Model Only
14. Remote Control
Lock Mode
physical
program high
m
Transmission
/ Receiving
[Commandl][Command2][
][SetlD][
--Plasma
TV Model Only
major
program low
major low
minor high
minor low
attribute
Protocol
][Data][Cr]
r'll
Z
X
'Command2][
][Set
ID][
][NG][Data][x]
iiiiiiiiiiiiiii
101
01.
Power (Command:
To control Power On/Off
Transmission[k] [a][]
0S. Screen Mute (Command:
k a)
of the TV.
[Set !D] [ ] [Data] [Cr]
Data O: Power Off
Transmission [k] [d][]
Data 1 : Power On
Acknowledgement[a][]
[Set ID] [ ] [OK/NG]
In a like manner, if other functions
'FF' data
[Data] [Cr]
Data 1: Screen mute on (Picture off)
Acknowledgement [d][]
[Set ID] []
[OK/NG]
[Data] [x]
data feedback
presents status about each function.
06. Volume Mute (Command:
Note: In this model, TV will send the Acknowledge
k e)
To control volume mute on/off.
completion.
You can also adjust mute using the MUTE button on
remote control.
There might be a time delay between command and
acknowledge.
02. Input Select
[SetlD][]
Data 0: Screen mute off (Picture on)
[Data] [x]
transmit
based on this format, Acknowledgement
after power on processing
k d)
To select screen mute on/off.
Transmission[k] [e][]
[set ID] [ ] [Data] [Cr]
....
Data 0 : Volume mute on (Volume off)
(Command:
k b) (Main
Picture
Input)
To select input source for the TV.
Data 1 : Volume mute off (Volume on)
Acknowledgement[e]
[]
[Set ID][]
[OKiNG]
[Data] [x]
TransmissiOn [k] [b] [ ] [Set ID] [ ] [Data] [cr]
Data 0: DTV
Data 1 : Analog
Data 2:AV1
Data 3:AV2
Data 4: Component
1
07. Volume Control
Data 5: Component
Data 7: RGB-PC
2
remote control.
Data 9:HDMI2
Transmission[k] [f] [ ] [Set ID][]
] [set ID][
] [OK/NG]
* You can select HDMI3 using (command
[Data] [x]
x b).
Select
(Command:
x b).
][Set
Data Min: 0 - Max: 64 (*transmit
(Command:
[Data] [x]
k g)
To adjust screen contrast.
ID][]
[Data] [Cr]
You can also adjust contrast
in the Picture menu.
Data 00: DTV (Antenna)
Data 01 : DTV (Cable)
TransmisSion[k] [g] []
Data 10: Analog (Antenna)
Data 11: Analog (Cable)
Data Min: 0 - Max: 64 (*transmit
Data 20:AV1
Data 21 : AV2
*Refer to 'Real data mapping 1'. See page 103.
"O
"O
Data 40: Component
Z
Data 60: RGB-PC
Data 90:HDMI1
Data 91:HDMI2
Data 92:HDMI3
1
Data 41: Component
2
ACknowledgement
[b][
][set
ID][
][OKiNG]
[Data] [x]
[Set ID] [ ] [Data] [Cr]
Acknowledgement [g] [ ] [Set ID][
09. Brightness
X
(Command:
Ratio (Command:
k c)
using the RATIO
button on remote control or in the Picture menu.
Data 1:4:3
[]
[Data] [Cr]
....
5: Zoom 2
2:16:9
4: Zoom
[SetlD]
6: Set by program
1
9: Just scan
Reserved
Acknowledgemen_ [c] [ ] [Set ID] [ ] [OKiNG]
[Data] [x]
[Data] [x]
in the Picture menu.
[Set ID] []
Data Min: 0 _ Max: 64 (*transmit
You can also adjust the screen format
Transmission [k] [c][]
] [OK/NG]
To adjust screen brightness.
TransmissiOn [k] [h] []
To adjust the screen format.
by Hexadecimal code)
k h)
You can also adjust brightness
04. Aspect
102
by Hexadecimal code)
Acknowledgement [f] [ ] [Set ID] [ ] [OK/NG]
08. Contrast
x b)
To select input source for TV.
Transmission [x] [b][
[Data] [Cr]
_Refer to 'Real data mapping 1'. See page 103.
* If you select input source, we recommend (command
Input
k f)
You can also adjust volume with the volume buttons on
Data 8:HDMI1
ACknoWledgement[b][
03.
(Command:
To adjust volume.
[Data] [Cr]
by Hexadecimal code)
*Refer to 'Real data mapping 1 '. See page 103.
Acknowledgemen_ [h][
] [Set ID] [ ] [OK/NG]
[Data] [x]
10.Color(Command:
ki)
Toadjust
screen
color.
You
canalsoadjust
color
inthePicture
menu.
16. Bass (Command:
You can also adjust bass in the Audio
TransmisSiOn [k][s][
TransmissiOn[k] [i] [ ] [Set ID] [ ] [Data] [Cr]
Data Min: 0 - Max: 64 (*transmit
*Refer to 'Real data mapping
Acknowledgement [i] []
1 1. Tint
(Command:
by Hexadecimal code)
][SetlD][
*Refer to 'Real data mapping
17. Balance
k j)
[s][
A_knoWledgernent
[OKZNG] [Data] [x]
][Set
(Command:
menu.
][Data][cr]
Data Min: 0 _ Max: 64 (*transmit
1 ' as shown below.
[Set ID] []
k s)
To adjust bass.
by Hexadecimal code)
1' as shown below.
ID][
][OKiNG]
[Data] [x]
k t)
To adjust screen tint.
To adjust balance.
You can also adjust tint in the Picture menu.
You can also adjust balance in the Audio menu.
Transmission [k] [j][
Transmission [k] [t][]
][Set ID][
][Data]
Data Red: 0 - Green: 64 (*transmit
*Refer to 'Real data mapping
ACknOwledgement
12. Sharpness
[j][
ID][
][OK/NG]
*Refer to 'Real data mapping
18. Color
k k)
Temperature
(Command:
[Data] [x]
k u)
You can also adjust color temperature
TransmisSion[k] [u][
Transmission [k] [k] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Medium
Data Min: 0 _ Max: 64 (*transmit
*Refer to 'Real data mapping
][Set
by Hexadecimal code)
1' as shown below.
To adjust color temperature.
You can also adjust sharpness in the Picture menu.
[k][
] [Data] [Cr]
[t] [ ][Set ID] [ ] [OK/NG]
Acknowledgement
[Data] [x]
To adjust screen sharpness.
Acknowledgement
[Set ID][
Data Min: 0 _ Max: 64 (*transmit
by Hexadecimal code)
1 ' as shown below.
][Set
(Command:
[cr]
1: Cool
in the Picture menu.
] [Data] [cr]
2: Warm 3: User
by Hexadecimal code)
Acknowledgement[u][
1 ' as shown below.
ID][
][Set ID][
][OKiNG]
[Data] [x]
19. Red Adjustment
][Set
ID][ ][OK/NG]
(Command:
[Data] [x]
k v)
To adjust red in color temperature
1 3. OSD Select
(Command:
k I)
Transmission [k] [v][]
To select OSD (On Screen Display) on/off.
Transmission[k] [I][]
[set ID] [ ] [Data] [Cr]
Data 0: OSD off
Acknowledgement
Lock Mode
To lock the remote control
on the set.
(Command:
and the front
ACknowledgement
][Set
Z
C7
*Refer to 'Real data mapping 2' as shown below.
ACknoWledgement
and front
panel
ID][ ][OKiNG]
X
[Data] [x]
1
0 : Step 0
*Real data mapping 2
0 : -20
5 :-19
A : Step 10 (SET ID 10)
A : -18
F : Step 15 (SET ID 15)
5F: -1
k r)
You can also adjust treble in the Audio menu.
][Set
ID][
][Data]
Data Min: 0 _ Max: 64 (*transmit
*Refer to 'Real data mapping
Acknowledgement[r][
*Real data mapping
lock is released.
To adjust treble.
Transmission [k] [r][
[W][ ][set
[Data] [x]
not using the remote
(Command:
k w)
Data Min: 0 _ Max: C8
on the TV, use this mode. When main power is
1 5. Treble
(Command:
"O
"O
m
controls
remote control
Green Adjustment
Transmission [k] [w] [ ] [Set lD] [ ] [Data] [Cr]
If you're
on/off,
[Data] [x]
panel controls
ID] [ ] [OK/NG]
control
[OKiNG]
To adjust green in color temperature.
Data 1: Lock on
[m][
[set ID][]
k m)
TransmisSiOn [k] [m] [ ] [get !D] [ ] [Data] [Cr]
Data 0: Lock off
[v][]
[Data] [x]
20.
Control
[Data] [Cr]
*Refer to 'Real data mapping 2' as shown below.
Data 1: OSD on
Acknowledgement [I] [ ] [Set ID] [ ] [OK/NG]
1 4. Remote
[Set ID][]
Data Min: 0 - Max: C8
][set
][OK/NG]
64:0
69:+1
by Hexadecimal code)
1 ' as shown.
ID][
10 : Step 16 (SET ID 16)
[Cr]
63 : Step 99 (SET ID 99)
64 : Step 100
[Data] [x]
!
C3 : +19
C8 : +20
103
21. Blue Adjustment
(Command:
k $)
To adjust blue in color temperature.
TransmissiOn [k] [$][
][Set iD][
][Data]
[Cr]
Data Min: 0 - Max: C8
*Refer to 'Real data mapping 2: See page 103.
AcknOwledgemen_ [$][
22. ISM Method
][Set
(Command:
ID][
][OK/NG]
[Data] [x]]
j p)
(Only Plasma TV model)
To avoid having a fixed image remain on screen.
Transmission [j ][p][]
[Set ID] [ ] [Data] [Cr]
Data 1 : Inversion
2: Orbiter
4: White Wash
8: Normal
Acknowledgemen_ [p][]
[Set ID] [ ] [OK/NG]
23. Low Power (Command:
[Data] [x]
j q)
(Only Plasma TV model)
To control the low power function
Transmission [)][q][]
[Set ID][]
on/off.
[Data][Cr]
.....
Data O: Low Power off
I: Low Power on
ACknowledgemen_ [q][]
24. Channel Tuning
[Set ID] [ ] [OK/NG]
(Command:
[Data] [x]
m a)
To tune channel to following physical/major/minor
Traasmissio_[ m] [a][]
[get iD][]
number.
[DataO] [ ] [Data i ]
[] [Data2] [ ] [Data3] [ ] [Data4] [ ] [Data5] [Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel.
Z
the ATSC tuner
automatically
maps the channel
Since
to the
Major number, the Physical number is not required when
X
sending a command.
Data 0: Physical Channel Number
NTSC air: 02-45,
NTSC cable: 01,0E-7D
ATSC air: 01-45,
ATSC cable: 01-87
Data1 & 2: Major Channel Number
Data1: High byte
Data2: Low byte
Two bytes are available for the Major and Minor, normally only the second byte is used.
Data3 & 4: Minor Channel Number
Not needed for NTSC.
104
Data 5:
The table above lists the binary code which must be
converted
to Hexadecimal
25.
Channel
Add/Del
(Command:
m b)
To add and delete the channels
before sending. For example:
The binary code to tune the sub source to an NTSC
Transmission [m] [b][]
cable channel is "1000
Data 0: Channel Delete
0001 ", which translates to "81"
in Hex.
[Set ID] [ ] [Data] [Cr]
AcknowledgemenL [b][
Data 1: Channel Add
][Set ID][
][0K/NG]
[Data] [x]
* 7th bit : For which source do you want to change the
channel.
26.
* 6th bit: Use a two part or one part channel. Most cases
TransmiSsion [m] [c][
* 5th bit: Use 0 with NTSC since it can only use the phys-
times it doesn't
m c)
To send IR remote key code.
just use 0 since it's ignored when using NTSC.
ical channel number. Normally
Key (Command:
][Set
ID][]
[Data] [Cr]
Data Key code: Refer to page 98.
use 1 for ATSC since most
AcknowledgemenL [c][
][Set
ID][
][OK/NG]
[Data] [x]
matter what the physical number is.
* 4th bit: Set to 0.
27.
* 3-0 bits: Choose signal type.
Back Light
(Command:
m g)
(Only LCD TV model)
To adjust screen back light.
* Tune Command
Examples:
TransmissiOn[m] [g][]
1. Tune to the analog (NTSC)
Data 0=
cable channel 35.
Physical of 35 = 23
*Refer to 'Real data mapping
Data 1 & 2 = No Major = 00 00
Acknowledgement[g][]
Data 3 & 4 = No Minor = 00 00
Data 5 = 0000
0001
[Set iD] [ ] [Data] [Cr]
Data Min: 0 - Max: 64 (*transmit
by Hexadecimal code)
1'. See page 102;.
[Set ID] [ ] [OK/NG]
[Data] [x]
-O
-O
m
Z
E3
in binary = 01
X
Total = ma 00 23 00 00 00 00 01
2. Tune to the digital (ATSC) local channel 30-3.
Data 0 = Don't know Physical = 00
Data 1 &2
Data3
= Major is 30 = 00 1E
&4=Minoris3
= 0003
Data 5 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22
ACknoW!edgemeni [a][ ][set
ID][]
[OK] [Data0] [Data]]
[Data2] [Data3] [Data4] [x] [a] [] [Set ID]
................
[ ] [NG] [DataO] [x]
105
OPENSOURCELICENSE
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim
this license document, but changing it is not allowed.
the program proprietary. To prevent this, we have made it clear
that any patent must be licensed for everyone's free use or not
licensed at all.
copies of
The precise terms and conditions for copying, distribution
modification follow.
and
Preamble
GNU GENERAL PUBLIC LICENSE
The licenses for most software are designed
to take away your
freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share
and change free software
- to make sure the software is free for
TERMS AND CONDITIONS
AND MODIFICATION
0.
all its users. This General Public License applies to most of the
Free Software
Foundation's
software and to any other
FOR COPYING,
DISTRIBUTION
This license applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The
program
whose authors commit to using it. (Some other free software
foundation software is covered by the GNU Lesser General Public
"Program",
below, refers to any such program or work, and a
License instead.)
derivative work under copyright
"work based on the Program" means either the Program orany
You can apply it to your programs, too.
law: that is to say, a work con-
taining the Program or a portion
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code
or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can
do these things.
modifications
(Hereinafter,
and/or
translation
of it, either verbatim
translated
into
another
is included
without
or with
language.
limitation
in the
term "modification".)
Each licensee is addressed as "you".
Activities
copying, distribution
other
are not covered
than
and modification
by this license; they are outside
The act of running the Program is not restricted,
its scope.
and the out-
put from the program is covered only if its contents constitute
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.
-O
-O
m
z
t_
x
a work based on the program (independent
made by running the program). Whether
on what the program does.
1.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get
the source code. And you must show them these terms so they
know their rights.
We protect
your rights with two steps: (1) copyright
of having been
that is true depends
You may copy and distribute verbatim copies of the program's
source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this license and to the
absence of any warranty; and give any other recipients of the
program a copy of this license along with the Program.
the soft-
ware, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
You may charge a fee for the physical act of transferring
a
copy, and you may at your option
in
offer warranty protection
exchange for a fee.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this
free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is
not the original, so that any problems introduced by others will
not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually
106
obtain patent
licenses, in effect making
2.
You may modify your copy or copies of the program or any
portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the
terms of section 1 above, provided that you also meet all of
these conditions:
a) You must cause the modified files to carry prominent
notices stating that you changed the files and the date of
any change.
b) You must cause any work that you distribute
that
in whole or in part contains
or publish,
or is derived
c) Accompany
from the
it with the information
offer to distribute
corresponding
you received as to the
source code. (This alter-
Program or any part there of, to be licensed as a whole at
native is allowed only for noncommercial
no charge to all third
license.
only if you received the program in object code or executable form with such an offer, in accord with Subsection
c) If the modified
parties
under
the terms
program normally reads commands interac-
tively when run, you must cause it, when started
for such interactive
or display
of this
including
b above.)
The source code for a work means the preferred form of the
an appropriate
work for making modifications
to it.
For an executable
copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users
complete
may redistribute
plus the scripts used to control compilation
telling
the
the program under these conditions,
user
how
to
view
a copy
of
(Exception: if the Program itself is interactive
normally print such an announcement,
this
license.
of the executable.
code distributed
your work based on
distributed
However, as a special exception, the source
(compiler,
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the
itself accompanies
Program, and can be reasonably considered
If distribution
and
runs, unless that component
the executable.
of executable
or object
code is made by offer-
ing access to copy from a designated
do not apply to those sections
equivalent
separate works. But when you distribute
the same sections as
whose permissions
for other
place, then
offering
access to copy the source code from the
place counts as distribution
part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this license,
that is normally
kernel, and so on) of the operating
separate works in themselves, then this license, and its terms,
them as
files,
and installation
need not include anything
system on which the executable
independent
interface definition
(in either source or binary form) with the major
components
the Program is not required to print an announcement.)
work,
source code means all the source code for all mod-
ules it contains, plus any associated
and
but does not
when you distribute
and
running
use in the most ordinary way, to print
an announcement
distribution
same
of the source code, even though
third parties are not compelled
to copy the source along with
the object code.
licensees extend to the entire
whole, and thus to each and every part regardless
wrote it.
of who
4.
You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this license.
otherwise
to
copy,
modify,
sublicense
or
Any attempt
distribute
Program is void, and will automatically
test your
by you; rather, the
under this license. However, parties who have received copies,
the distribution
or rights, from you under this license will not have their licens-
rights to work written
entirely
intent is to exercise the right to control
derivative
In addition,
or collective
of
works based on the program.
mere aggregation
of another
es terminated
ance.
on a volume of a storage
or distribution
5.
You are not required to accept this license, since you have not
signed
it. However, nothing
does not bring the other work under the scope of this license.
modify
or distribute
the
else grants
Program
These actions are prohibited
the program (or a work based on
it, under section 2) in object
the terms of sections
license. Therefore,
code or executable form under
1 and 2 above provided
that you also
a) Accompany it with the complete corresponding
readable source code, which must be distributed
b) Accompany
6.
or,
or distributing
Each time you redistribute
or modifying
from the original
automatically
Program subject to these terms and conditions.
your cost of physically
performing
impose any further
a
1 and 2 above on a medium customarily
interchange;
the program
receives a license
licensor to copy, distribute
party, for a charge no more than
source distribution,
X
the program or works
years, to give any third
complete machine-readable
copy of the corresponding
source code, to be distributed under the terms of sections
Z
C7
the program (or any work based on
the Program), the recipient
it with a written offer, valid for at least three
to
works.
by law if you do not accept this
by modifying
for copying, distributing
based on it.
machineunder the
1 and 2 above on a medium customarily
used for software interchange;
you permission
or its derivative
(or any work based on the program), you indicate your acceptance of this license to do so, and all its terms and conditions
do one of the following:
terms of sections
rights
so long as such parties remain in full compli-
medium
3. You may copy and distribute
your
work not based on
the program with the Program (or with a work based on the
program)
terminate
the
Thus, it is not the intent of this section to claim rights or con-
the rights granted
ing compliance
restrictions
or modify
the
You may not
on the recipients'
exercise of
herein. You are not responsible
for enforc-
by third parties to this license.
used for software
or,
107
If, as a consequence
of a court
patent
infringement
patent
issues), conditions
judgment
or for any other
or allegation
of
reason (not limited to
are imposed
on you (whether
by
court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license. If you cannot distribute
fy simultaneously
other
not
pertinent
distribute
license
your obligations
obligations,
the
would not
so as to satis-
under this license and any
then as a consequence
you may
any later version published
If the program
number
of this
license, you may choose any version ever published
Free Software Foundation.
by the
lO.If you wish to incorporate
the author
righted
Software Foundatiom
of the
conditions
to ask for permission.
program at all. For example, if a patent
redistribution
a version
parts of the program into other free
programs whose distribution
permit
royalty-free
by the Free Software Foundation.
does not specify
by the Free Software
are different, write to
For software which is copy-
Foundation,
we sometimes
write
to the Free
make exceptions
for this.
program by all those who receive copies directly or indirectly
Our decision will be guided by the two goals of preserving the
through
free status of all derivatives
you, then the only way you could satisfy both it and
this license would be to refrain entirely
from distribution
of
of our free software and of pro-
moting the sharing and reuse of software generally.
the program.
NO WARRANTY
If any portion
of this section is held invalid or unenforceable
under any particular
circumstance, the balance of the section
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
is intended to apply and the section as a whole is intended to
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
apply in other
circumstances.
OTHERWISE STATED IN WRITING THE COPYRIGHT
It is not the purpose of this section to induce you to infringe
ERS AND/OR
any patents or other property
IS"
right claims or to contest valid-
ity of any such claims; this section
protecting
the integrity
has the sole purpose
of the free software distribution
tem, which is implemented
of software
distributed
through
consistent
application
of
author/donor
software
to decide
through
sys-
by public license practices.
people have made generous contributions
that
that
of
Many
to the wide range
system in reliance
system;
it
is up
to
on
the
if he or she is willing to distribute
any other
system and a licensee
WITHOUT
WARRANTY
OF
ANY
EXPRESSED OR IMPLIED, INCLUDING,
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY
PROGRAM IS WITH
AND
PERFORMANCE
is intended
If the distribution
and/or
certain countries
either
faces, the original
X
to make thoroughly
clear what
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
is
of the rest of this license.
AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER,
OR ANY
AND/OR
OTHER
PARTY WHO
MAY
MODIFY
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
use of the program is restricted
by patents
copyright
or by copyrighted
in
inter-
holder who places the program
under this license may add an explicit geographical
limitation
excluding
permitted
only in or among countries
those countries,
such case, this license incorporates
so that
distribution
distribution
not thus excluded.
the limitation
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The Free Software Foundation may publish revised and/or
new versions of the General Public License from time to time.
Such new versions will be similar in spirit to the present ver-
Each version is given a distinguishing
program
specifies
a version
number
applies to it and "any later version",
following the terms and conditions
108
version
of this
number.
or con-
If the
license which
you have the option
GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-
is
as if written
sion, but may differ in detail to address new problems
cerns.
ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PRO-
In
in the body of this license.
9.
OF THE
YOU. SHOULD THE PROGRAM PROVE
LIABLE TO YOU FOR DAMAGES, INCLUDING
Z
C7
EITHER
12.1N NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
believed to be a consequence
8.
KIND,
BUT NOT LIMITED
cannot
impose that choice.
This section
HOLD-
OTHER PARTIES PROVIDE THE PROGRAM "AS
of
either of that version or of
END OF TERMS AND CONDITIONS
Also add information
on how to contact
you by electronic
and
paper mail.
How to apply these terms to your new programs
If you develop a new program, and you want it to be of the greatest possible
If the program is interactive, make it output
this when it starts in an interactive mode:
a short
notice
like
use to the public, the best way to achieve this is to
make it free software which everyone can redistribute
under these terms.
and change
Gnomovision
Gnomovision
version 69, Copyright
(C) year name of author
comes with ABSOLUTELY NO WARRANTY; for
details type 'show w'. This is free software, and you are welcome
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively convey the exclusion of warranty;
least the "copyright"
found.
Copyright
it under
certain
conditions;
'show
c' for
name and a brief idea of what it
The hypothetical
commands
'show w' and 'show c' should show
the appropriate
parts of the General Public License. Of course,
the
you use may be called something
commands
other
'show w' and 'show c'; they could even be mouse-clicks
items-whatever
than
or menu
suits your program.
(C)
You should also get your employer
This program
is free software;
you can redistribute
it and/or
modify it under the terms of the GNU General Public License as
published
type
and each file should have at
line and a pointer to where the full notice is
one line to give the program's
does.
to redistribute
details.
by the Free Software
the license, or (at your option)
Foundation;
either version
gram, if necessary.
disclaimer"
Yoyodyne, Inc., hereby disclaims all copyright
in the hope that it will be useful, but
signature
Ty Coon, President of Vice
You should
This General Public License does not permit
General
Public
written by
James Hacker.
POSE. See the GNU General Public License for more details.
of the GNU
interest in the pro-
(which makes passes at compilers)
WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
have received a copy
for the pro-
Here is a sample; alter the names:
2 of
any later version.
gram 'Gnomovision'
This program is distributed
(if you work as a programmer)
or your school, if any, to sign a "copyright
of Ty Coon, 1 April 1989
program into proprietary
incorporating
your
programs. If your program is a subrou-
License along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
tine library, you may consider it more useful to permit linking pro-
02110-1301
prietary applications with the library. If this is what you want to
do, use the GNU Lesser General Public License instead of this
USA.
license.
Z
C7
X
109
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright
(C) 1991, 1999 Free Software Foundation, Inc. 51
Franklin Street, Fifth Floor, Boston, MA
02110-1301
USA
Everyone is permitted
to copy and distribute
this license document,
verbatim
copies
of
To protect
each distributor_
that what they have is not the original version, so that the origi-
but changing it is not allowed.
nal author's
[This is the first
counts
released version
of the Lesser GPL.
It also
reputation
might be introduced
Finally, software patents pose a constant
of any free program.
Preamble
not effectively
restrictive
that
any patent license obtained
the GNU General
consistent
to guarantee your freedom
to the existence
restrict the users of a free program by obtaining
to take away your
to share and change it. By contrast,
threat
license from a patent holder. Therefore,
freedom
and change free software
all its users.
a
we insist that
for a version of the library must be
with the full freedom
of use specified
in this license.
to share
- to make sure the software is free for
Most GNU software,
ordinary
GNU
including
General
Lesser General
Public
some libraries, is covered by the
Public License. This license, the
License, applies
to
certain
libraries, and is quite different
specially designated software
the Free Software Foundation
License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
packages - typically libraries - of
and other authors who decide to
use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public
When a program
License is the better strategy to use in any particular
using a shared
case, based
below.
from the ordinary
GNU
designated
This license, the Lesser General Public License, applies to some
on the explanations
General Public
is linked with a library, whether
library,
the combination
of the
statically
two
or
is legally
speaking a combined work, a derivative of the original library. The
ordinary
When we speak of free software, we are referring to freedom
of
use, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free soft-
X
by problems
We wish to make sure that a company can-
The licenses for most software are designed
Public Licenses are intended
Z
C7
will not be affected
by others.
as the successor of the GNU Library Public License, ver-
sion 2, hence the version number 2.1.]
-O
-O
m
we want to make it very clear that
there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know
only
General
Public License therefore
if the entire
combination
fits
permits
its criteria
such linking
of freedom.
The
Lesser General Public License permits more lax criteria for linking
other code with the library.
ware (and charge for this service if you wish); that you receive
source code or can get it if you want it; that you can change the
We call this license the "Lesser" General Public License because
software and use pieces of it in new free programs; and that you
it does Less to protect
are informed that you can do these things.
General Public License. It also provides other free software devel-
the user's freedom
opers Less of an advantage
To protect
distributors
your rights, we need to make restrictions
that forbid
to deny you these rights or to ask you to surrender
these rights. These restrictions
for you if you distribute
translate to certain responsibilities
These disadvantages
over competing
than
the ordinary
non-free
programs.
are the reason we use the ordinary General
Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.
copies of the library or if you modify it.
For example, on rare occasions, there may be a special need to
For example, if you distribute
copies of the library, whether gratis
or for a fee, you must give the recipients
all the rights that we
encourage the widest possible use of a certain library, so that it
becomes a de-facto
standard. To achieve this, non-free programs
gave you. You must make sure that they, too, receive or can get
must be allowed to use the library. A more frequent
the source code. If you link other code with the library, you must
a free library does the same job as widely used non-free libraries.
provide
In this case, there is little to gain by limiting the free library to free
complete
object files to the recipients,
so that they can
case is that
relink them with the library after making changes to the library
and recompiling it. And you must show them these terms so they
software only, so we use the Lesser General Public License.
know their rights.
In other cases_ permission
to use a particular
library in non-free
programs enables a greater number of people to use a large body
We protect your rights with a two-step
method: (1) we copyright
the library, and (2) we offer you this license, which gives you legal
permission to copy, distribute and/or modify the library.
of free software.
Library in non-free
the
whole GNU
GNU/Linux
110
For example, permission
to use the
GNU C
programs enables many more people to use
operating
operating
system, as well as its variant,
system.
the
Although the Lesser General Public License is Less protective of
the users' freedom, it does ensure that the user of a program that
each copy an appropriate
is linked with the Library has the freedom and the wherewithal
and to the absence of any warranty; and distribute
warranty;
to
run that program using a modified version of the Library.
copyright
notice and disclaimer
of
keep intact all the notices that refer to this license
a copy of
this license along with the Library.
and
You may charge a fee for the physical act of transferring
a
modification follow. Pay close attention to the difference between
a "work based on the library" and a "work that uses the library".
copy, and you may at your option offer warranty protection
in
The precise terms and conditions
The former contains
for copying, distribution
exchange for a fee.
code derived from the library, whereas the
latter must be combined
with the library in order to run.
2.
You may modify your copy or copies of the Library or any
portion of it, thus forming a work based on the Library, and
copy
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS
AND MODIFICATION
FOR COPYING,
DISTRIBUTION
such modifications
or work under
the
that you also meet all of
a) The modified work must itself be a software library.
0. This license agreement applies to any software library or other
program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed
under the terms of this
Lesser General
Public License (also
called "this license"). Each license is addressed
A "library"
and distribute
terms of section 1 above, provided
these conditions:
means a collection
as "you".
of software functions
data prepared so as to be conveniently
b) You must cause the files modified to carry prominent
notices stating that you changed the files and the date of
any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this license.
d) If a facility in the modified
and/or
the facility
linked with application
programs (which use some of those functions
form executables.
effort
and data) to
performs
or a
program that
passed when
is invoked, then you must make a good
to ensure that, in the event an application
supply such function
The "Library", below, refers to any such software library or work
which has been distributed under these terms. A "work based
Library refers to a function
table of data to be supplied by an application
uses the facility, other than as an argument
faith
does not
or table, the facility still operates, and
whatever part of its purpose remains meaningful.
on the Library" means either the Library or any derivative work
(For example, a function in a library to compute square roots
has a purpose that is entirely well-defined independent of the
under
application.
copyright
law: that
is to
say, a work containing
the
Therefore, Subsection
2d requires that any appli-
library or a portion
of it, either verbatim or with modifications
cation-supplied
and/or
straightforwardly
optional:
if the application
function
must still compute square roots.)
translated
(Hereinafter,
translation
into another
is included without
language.
limitation
in the
function or table used by this function must be
does not supply it, the square root
term "modification".)
"Source
code"
for a work means the preferred
form of the
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the
work for making modifications
to it. For a library, complete
source code means all the source code for all modules it con-
separate works in themselves, then this license, and its terms,
tains, plus any associated
do not apply to those sections
scripts used to control
library.
interface
definition
compilation
files, plus the
and installation
of the
library, and can be reasonably
other
are not covered
than copying,
Z
and
X
them as
the same sections as
part of a whole which is a work based on the library, the disdistribution
and modification
by this license; they are outside
its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute
independent
when you distribute
separate works. But when you distribute
tribution
Activities
considered
a work based on the library (independent
of
the use of the Library in a tool for writing it). Whether that is
true depends on what the library does and what the program
whose
of the whole must be on the terms of this license,
permissions
for other
licenses extend to the
whole, and thus to each and every part regardless
wrote it.
entire
of who
Thus, it is not the intent of this section to claim rights or contest your
rights to work written
entirely
intent is to exercise the right to control
derivative
or collective
by you; rather, the
the distribution
of
works based on the library.
that uses the library does.
In addition,
1. You may copy and distribute
complete
vided that
verbatim
copies of the library's
source code as you receive it, in any medium, proyou conspicuously
and appropriately
publish on
the
mere aggregation
library with
the library
of another
(or with
work not based on
a work
based on the
library) on a volume of a storage or distribution
medium does
not bring the other work under the scope of this license.
111
3.
You may opt to apply the terms of the ordinary
GNU General
the object file is unrestricted,
regardless of whether it is legal-
Public License instead of this License to a given copy of the
ly a derivative
work.
Library. To do this, you must alter all the notices that refer to
plus portions
of the library will still fall under Section 6.)
this License, so that they refer to the ordinary
Otherwise,
version than version
distribute
License has appeared,
then you
GNU General
can specify
instead if you wish.) Do not make any other
notices.
containing
this object code
GNU General
Public License, version 2, instead of to this License. (Ifa newer
2 of the ordinary
(Executable
that
Public
version
if the work is a derivative
the object
of the library, you may
code for the work under
Section 6. Any executable containing
change in these
Section
6, whether
the terms of
that work also fall under
or not they are linked directly
with the
library itself.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies
to all subsequent
copies and derivative works made from that
6.
As an exception
to the sections above, you may also combine
or link a "work that uses the library" with the library to pro-
copy.
This option is useful when you wish to copy part of the code
duce a work containing
of the library into a program that is not a library.
permit
portions
modification
of the work for the customer's
and reverse engineering
4.
You may copy and distribute
You must give prominent
under the terms of Sections
that the library is used in it and that the Library and its use
it with
terms of sections
used for software
If distribution
the
1 and 2 above provided that you
complete
corresponding
machine-
must be distributed
under the
1 and 2 above on a medium
customarily
interchange.
of object
copy from a designated
requirement
place, then offering equivalent
to distribute
are covered by this license. You must supply a copy of this
license.
If the
work
third
to copy the source along with the
object code.
a) Accompany
the
machine-readable
by being
code and/or
or linked with
it, is called a "work that
uses the
library and then relink to produce
the
scope
machine-readable
"work that
uses the Library", as object
source code, so that the user can modify the
work of
containing
of this
user who changes the contents
the modified
library.
a modified
executable
(It is understood
of definitions
that the
files in the
library will not necessarily be able to recompile the application to use the modified definitions.)
However, linking a "work that uses the library" with the Library
creates
(because
an executable
that
it contains
portions
is a derivative
of the
of the library),
"work that uses the library". The executable
Library
rather than a
is therefore
ered by this license. Section 6 states terms for distribution
such executable.
covof
er file that is part of the library, the object code for the work
may be a derivative work of the library even though the source
code is not.
Whether this is true is especially
linked without
threshold
structure
significant if the work can be
the library, or if the work is itself a library. The
for this to be true is not precisely defined by law.
If such an object
file uses only
layouts and accessories,
inline functions
numerical
parameters,
data
and small macros and small
(ten lines or less in length),
b) Use a suitable shared library mechanism for linking with the
library. A suitable mechanism is one that (1) uses at run time
a copy of the library already present on the user's computer
system, rather than copying library functions
into the exe-
cutable, and (2) will operate properly with a modified version
of the library, if the user installs one, as long as the modified
When a "work that uses the library" uses material from a head-
112
including
linked with the Library, with the complete
to work with the Library
falls outside
corresponding
library
under Sections 1 and 2 above); and, if the work
is designed
is not a derivative
copyright
the user to the
complete
code for the
Library, but
Library". Such a work, in isolation,
of the
with the
source
no derivative
the Library, and therefore
license.
displays
notice for the library
whatever changes were used in the work (which must be
distributed
of any portion
work
A program that contains
compiled
X
execution
copy of this license. Also, you must do one of these things:
is an executable
Z
C7
during
notices, you must include the copyright
access
the source code, even though
parties are not compelled
notice with each copy of the work
among them, as well as a reference directing
code is made by offering access to
to copy the source code from the same place satisfies the
m
own use
such modifications.
the library (or a portion or deriv-
readable source code, which
>
for debugging
ative of it, under Section 2) in object code or executable form
accompany
5.
of the library, and distribute
that work under terms of your choice, provided that the terms
then the use of
version is interface-compatible
work was made with.
c) Accompany
with the version that
the work with a written
the
offer, valid for at least
three years, to give the same user the materials specified
in
Subsection
6, above, fora charge no more than the cost of
performing
this distribution.
d) If distribution
of the work is made by offering
access to
copy from a designated
place, offer equivalent
copy the above specified
materials from the same place.
access to
e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
For an executable,
the library"
the required
ed for reproducing
cial
form of the "work that uses
must include any data and utility
exception,
the executable from it. However, as a spe-
the
include anything
materials
to
be distributed
that is normally distributed
and so on) of the operating
runs, unless that
cutable.
of other
(compiler,
itself
proprietary
the operating
accompanies
contradicts
kernel,
the
exe-
the license
libraries that do not normal-
system.
of the rights granted
You are not
Such a contradiction
means you cannot use both them and the library together
11. If, as a consequence
in
infringement
library facilities
not
such a combined
that are a work based on the
covered
by this
library, provided
with
patent
issues), conditions
other
license, and distribute
that the separate distributhat
you do
work
based on the
library with a copy of the same
Library, uncombined
with
library facilities. This must be distributed
of the sections above.
fact that
by
the con-
of this license. If you cannot distribute
fy simultaneously
other
pertinent
your obligations
obligations,
so as to satis-
under this license and any
then as a consequence
you may
the library at all. For example, if a patent license
would not permit royalty-free
redistribution
who receive copies directly
the only way you could
license would be to refrain entirely
of the library by
or indirectly
satisfy
both
through
it and this
from distribution
of the
library.
If any portion
of this section is held invalid or unenforceable
under any particular
circumstance, the balance of the section
to apply, and the section as a whole is intended to
It is not the purpose of this section to induce you to infringe
the combined
b) Give prominent
on you (whether
that contradict
of this license, they do not excuse you from the con-
any patents or other property
a) Accompany
of
ditions
apply in other circumstances.
and provided
or allegation
ditions
facilities
permitted,
by third
reason (not limited to
are imposed
is intended
these two things:
judgment
or otherwise)
tion of the work based on the Library and of the other library
is otherwise
compliance
or for any other
court order, agreement
all those
in a single library together
of a court
patent
you, then
library side-by-side
for enforcing
parties with this license.
not distribute
an executable that you distribute.
You may place library facilities
herein.
responsible
not
system on which the executable
component
It may happen that this requirement
ly accompany
need
(in either source
or binary form) with the major components
restrictions
programs need-
notice
under the terms
protecting
the integrity
has the sole purpose
of the free software distribution
tem which is implemented
library of the
based on the library,
explaining where to find the accompanying
form of the same work.
and
uncombined
of software
distributed
through
consistent
application
of
author/donor
software
to decide
through
that
that
of
sys-
by public license practices.
people have made generous contributions
with the combined
part of it is a work
any other
right claims or to contest valid-
ity of any such claims; this section
Many
to the wide range
system in reliance on
system;
it
is up
to
the
if he or she is willing to distribute
any other
system and a license
cannot
impose that choice.
8. You may not copy, modify, sublicense, link with, or distribute
the library except
as expressly
provided
under
this license.
Any attempt
otherwise
or distribute
the library is void, and will automatically
This section
is intended
to make thoroughly
believed to be a consequence
termi-
However, parties who have
received copies, or rights, from you under this license will not
have their licenses terminated
so long as such parties remain
in full compliance.
12. If the distribution
tain countries
and/or
use of the library is restricted
either by patents or by copyrighted
the original copyright
those
holder who places the library under this
countries,
so that
only in or among countries
signed it. However, nothing else grants you permission to modthe
library or its derivative
works.
or distributing
the library (or any work
based on the library), you indicate your acceptance
license to do so, and all its terms and conditions
distributing
or modifying
this license incorporates
of this license.
of this
for copying,
the library or works based on it.
the
Library),
the recipient
the library (or any work based on
automatically
from the original licensor to copy, distribute,
receives a license
link with or mod-
ify the library subject to these terms and conditions.
You may
not impose any further restrictions
exercise
on the recipients'
X
limitation
is permitted
not thus excluded. In such case,
the limitation as if written in the body
13.The Free Software Foundation may publish revised and/or
new versions of the Lesser General Public License from time to
time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems
concerns.
Each version is given a distinguishing
lO.Each time you redistribute
distribution
Z
C7
These
by law if you do not accept this license.
Therefore, by modifying
in cer-
interfaces,
license may add an explicit geographical distribution
excluding
9. You are not required to accept this license, since you have not
ify or distribute
is
to copy, modify, sublicense, link with,
nate your rights under this license.
actions are prohibited
clear what
of the rest of this license.
version number.
or
If the
library specifies a version number of this license which applies
to it and "any later version", you have the option of following
the terms and conditions
version published
either of that version or of any later
by the Free Software Foundation.
113
If the library does not specify
a license version number, you
may choose any version ever published
Foundation.
14.1f you wish to incorporate
To apply these terms, attach the following notices to the library.
It is safest to attach them to the start of each source file to most
effectively
parts of the library into other free
programs whose distribution
these, write to the author
by the Free Software
conditions
are incompatible
to ask for permission.
by the Free Software Foundation,
to the Free Software
Foundatiom
we sometimes
line and a pointer to where the full
with
For software
which is copyrighted
convey the exclusion of warranty; and each file should
have at least the "copyright"
notice is found.
write
one line to give the library's
Copyright
name and a brief idea of what it does.
(C)
make excep-
tions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software
This library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
and of promoting
published
the sharing and reuse of software generally.
by the Free Software Foundatiom
the license, or (at your option)
either version 2.1 of
any later version.
NO WARRANTY
This library is distributed
15.BECAUSE
THE LIBRARY IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT
ERS AND/OR
IS"
HOLD-
in the hope that
it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU
Lesser General
Public License for more
details.
OTHER PARTIES PROVIDE THE LIBRARY "AS
WITHOUT
WARRANTY
OF
ANY
EXPRESSED OR IMPLIED, INCLUDING,
KIND,
EITHER
BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY
LIBRARY IS WITH
YOU.
AND
PERFORMANCE
SHOULD
THE
You should
have received
a copy of the GNU Lesser General
Public License along with this library; if not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA
02110-1301
USA
OF THE
LIBRARY PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
Also add information
on how to contact
you by electronic
and
paper mail.
SERVICING, REPAIR OR CORRECTION.
You should also get your employer (if you work as a programmer)
16.1N NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT
OR ANY OTHER PARTY WHO MAY MODIFY
REDISTRIBUTE
THE LIBRARY AS PERMITTED
LIABLE TO YOU FOR DAMAGES, INCLUDING
HOLDER,
AND/OR
ABOVE, BE
ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
Z
C7
X
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to apply these terms to your new libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend
ware that everyone
by permitting
can redistribute
redistribution
under these terms (or, alternatively,
under the terms of the ordinary
114
making it free soft-
and change. You can do so
General Public License).
or your
school, if any, to sign a "copyright
disclaimer"
for the
library, if necessary. Here is a sample; alter the names:
Yoyodyne,
Inc., hereby
disclaims
all copyright
library 'Frob' (a library for tweaking
Random Hacker.
signature
of Ty Coon, 1 April
Ty Coon, President of Vice
1990
knobs)
interest
written
in the
by James
MOZILLA PUBLIC LICENSE
Version 1.1
code
1 •Definitions•
which
is described
in the
source
code
notice
required by exhibit as original code, and which, at the time
1.0.1. "Commercial
use" means distribution
the covered code available to a third
1.1.
or otherwise
making
of its release under
party.
"Contributor"
means each entity that
tributes to the creation of modifications•
this license
is not already
covered
code governed by this license.
creates
or con-
1.lO.l ."Patent claims" means any patent claim(s), now owned or
hereafter acquired,
including
without
limitation,
method,
process, and apparatus claims, in any patent licensable by
1.2.
"Contributor
version" means the combination
inal code, prior
modifications
the modifications
of the orig-
used by a contributor,
made by that particular
grantor.
and
1.11.
contributor.
"Source code"
means the preferred
code for making modifications
1.3.
"Covered
code" means the original code or modifications
or the combination
in each case including
1.4.
"Electronic
it contains,
of the original code and modifications,
portions
distribution
thereof.
mechanism"
ty for the electronic
transfer
executable,
or
interface
compilation
source
code
definition
files,
and installation
of an
differential
comparisons
against either the original code or another
available covered code of the contributor's
means a mechanism
generally accepted in the software development
plus any associated
scripts used to control
form of the covered
to it, including all modules
communi-
well known,
choice. The
source code can be in a compressed or archival form, pro-
of data.
vided the appropriate
decompression
or de-archiving
soft-
ware is widely available for no charge.
1.5.
1.6.
"Executable" means covered code in any form other
source code.
"Initial
developer"
than
1.12.
"You" (or "Your")
1.8.
means the individual or entity identified
under section 6.1.
by exhibit A.
For legal entities, "You" includes any entity which controls,
by, or is under common
purposes of this definition,
or portions thereof
of this License.
direct or indirect, to cause the direction
with code not governed by the terms
such entity, whether by contract
"License" means this document•
means having the right to grant, to the maxi-
mum extent possible,
whether
grant or subsequently
acquired,
conveyed
any and all of the rights
means any addition
or structure
to or deletion
of either the original
any previous
modifications•
When covered
released as a series of files, a modification is:
containing
to or deletion
(50%)
of such entity.
of the outstandZ
E:I
X
2. Source Code License.
2.1.
The initial developer
grant.
The initial developer
hereby grants You a world-wide,
from
non-exclusive
lectual property
from the contents
code
is
claims:
a) under intellectual
trademark)
of a file
original code or previous modifications•
property
rights (other than patent or
licensable by initial developer to use, repro-
code
sublicense and distrib-
ute the original code (or portions
out modifications,
or previous modifications.
and/or
thereo 0 with or with-
as part of a larger work; and
by the making, using or
selling of original code, to make, have made, use, practice, sell, and offer for sale, and/or
of the original code (or portions
code" means source code of computer
roy-
license, subject to third party intel-
(b) under patents claims infringed
"Original
>
code or
B. Any new file that contains any part of the original
1.10.
of
or (b) own-
ing shares or beneficial ownership
duce, modify, display, perform,
A. Any addition
or management
or otherwise,
ership of more than fifty percent
alty-free,
the substance
means (a) the power,
at the time of the initial
herein.
"Modifications"
"control"
control with You. For
"Larger work" means a work which combines covered code
1 •8•1 •"Licensable"
1.9.
or a legal entity
as the initial Developer in the Source Code notice required
is controlled
1 .Z
means an individual
exercising rights under, and complying with all of the terms
of, this license or a future version of this license issued
otherwise
dispose
there o0.
software
115
(c) the licenses granted
effective
in this section 2.1 (a) and (b) are
on the date Initial developer
original
You may not offer or impose any terms on any source code
first distributes
version that
code under the terms of this license.
you
(d) Notwithstanding
section 2.1(b)
above, no patent
license is granted: 1 ) for code that You delete from the
original
Code; 2) separate from the original code;
3) for infringements
may include
the applicable
an additional
additional
rights described
Availability
of source code.
version
rights hereunder.
document
of
However_
offering
the
in section 3.5.
or
caused by: i) the modification
the original code or ii) the combination
code with other software or devices.
alters or restricts
this license or the recipients'
of
3.2.
of the original
Any modification
which you create or to which you contribute must be made available in source code form under
the terms of this license either on the same media as an
2.2.
Contributor
Subject
Grant.
to third
executable
party
intellectual
property
claims, each
contributor
hereby grants You a world-wide,
non-exclusive license
version or via an accepted
electronic
distribu-
tion mechanism to anyone to whom you made an executable version available; and if made available via elec-
royalty-free,
tronic distribution
mechanism, must remain available for at
least twelve (12) months after the date it initially
(a) under intellectual property
or trademark)
licensable
reproduce,
distribute
tor
modify,
basis, with
and/or
display,
perform,
the modifications
(or portions
thereof)
other
available, or at least six (6) months
rights (other than patent
by contributor,
to use,
sublicense
version
and
modification
has been
You are responsible
ing that the source code version remains available even if
on an unmodified
the electronic
as covered
third party.
modifications,
code
distribution
mechanism
is maintained
by the making, using, or
3.3.
Description
of modifications.
selling of
modifications
made by that contributor
either alone and/or in combination with its contributor
You must cause all covered code to which you contribute
version
that covered code and the date of any change. You must
(or portions
of such combination),
(or portions
to make,
otherwise
thereof); and 2) the combination
version (or portions
contain a file documenting
include a prominent
made by that contributor
ifications made by that contributor
of mod-
above,
no
patent
license is granted: 1 ) for any code that contributor
deleted from the contributor
the contributor
version;
or ii) the combination
has
versiom 2) separate from
3) for infringements
by: i) third party modifications
of contributor
of modifications
the
modification
executable version or related documentation
caused
version
made by that
Intellectual
property
matters
(a) Third party claims.
If contributor
party's
has knowledge that a license under a third
intellectual
property
rights is required to exercise
the rights granted by such contributor under sections 2.1
or 2.2, contributor must include a text file with the source
code distribution
titled
"LEGAL" which describes the claim
with other software (except as part of the
and the party making the claim in sufficient
contributor
version)
recipient will know whom to contact.
patent
claims
infringed
absence of modifications
by
devices; or 4) under
covered
code
in the
made by that contributor.
such knowledge after the modification
described
Obligations.
Application
thereafter
in section 3.2, contributor
which You create or to which you con-
shall promptly
(b) Contributor
covered code may be distributed
this license or a future version
programming
section
steps
modi-
makes available
(such as notifying
new knowledge has been obtained.
tribute are governed by the terms of this license, including
without limitation section 2.2. The source code version of
under
obtains
is made available as
appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the covered code that
of license.
The modifications
and shall take other
detail that a
If contributor
fy the LEGAL file in all copies contributor
3. Distribution
initial
in which you
contributor
or other
is
describe the origin or ownership of the covered code.
3.4.
2.2(b)
that
developer in (a) the source code, and (b) in any notice in an
of such combination).
section
statement
the initial developer and including the name of the
with its contributor
cial use of the covered code.
(d) Notwithstanding
to
the changes You made to create
derived, directly or indirectly, from original code provided by
(c) the licenses granted in sections 2.2(a) and 2.2(b) are
effective on the date contributor
first makes commer-
only under the terms of
of this license released
6.1, and you must include a copy of this
license with every copy of the source code you distribute.
116
by a
as part of a larger work; and
dispose off 1) modifications
3.1.
made
for ensur-
created by such contribu-
use, sell, offer for sale, have made, and/or
X
particular
either
(b) under patent claims infringed
Z
C7
of that
available to such recipients.
became
after a subsequent
If contributor's
APIs.
modifications
interface
include
and contributor
an
application
has knowledge
of
patent licenses which are reasonably necessary to implement
that API, contributor
must also include this information in
the LEGAL file.
3.Z
(c) Representations.
contributor
represents that, except as disclosed
You may create a larger work by combining
with other code not governed
modifications
are contributor's
and/or contributor
has sufficient
and distribute
original
creation(s)
rights to grant the rights
Required notices.
covered code
by the terms of this license
the larger work as a single product.
In such
a case, you must make sure the requirements
license are fulfilled for the covered code.
by this license.
of this
4. Inability to comply due to statute or regulation.
You must duplicate the notice in exhibit A in each file of
If it is impossible for you to comply with any of the terms
the source code.
of this license with respect to some or all of the covered
a particular
If it is not possible to put such notice in
source code file due to its structure,
must include such notice in a location
directory)
then You
code due to statute, judicial
(such as a relevant
If You created one or more modification(s),
may add
your
in exhibit A. you must also duplicate this license
name as a contributor
in any documentation
describe
recipients'
covered
code.
for the
to
the
notice
included with all distributions
code where You
to the extent
rights or ownership
rights relating to
description
You may choose to offer, and to charge a
indemnity
to one or more recipients
absolutely
or any contributor.
obligation
is offered
hereby agree to indemnify
contributor
5. Application
indemnity
or liability
Distribution
You may distribute
the requirements
or regulation,
such
detailed for a recipient
of
it.
the Initial developer
of this license.
indemni-
by you alone, and You
6. Versions of the license.
and every
as a result of warranty,
6.1.
support,
New versions.
Netscape communications corporation
("Netscape")
may
publish revised and/or new versions of the license from
terms you offer.
of executable
must be sufficiently
This license applies to code to which the initial developer has
attached the notice in exhibit A and to related covered code.
You must make it
for any liability incurred by the Initial develop-
er or such contributor
of the source code. Except
by statute
or liability obligations
of covered code. However, you
clear than any such warranty, support,
ty or liability
prohibited
ordinary skill to be able to understand
may do so only on your own behalf, and not on behalf of
the Initial developer
and
the code they affect. Such description must be included in
the LEGAL file described
in section 3.4 and must be
source
fee for, warranty, support,
then you
imum extent possible; and (b) describe the limitations
you
described
order, or regulation
must: (a) comply with the terms of this license to the max-
where a user would be likely to look for such a
notice.
3.6.
Larger works.
to section 3.4(a) above, contributor believes that contributor's
conveyed
3.5.
pursuant
time to time. Each version will be given a distinguishing
version number.
versions.
covered code in executable form only if
of section
5.1-5.5
have been met for
6.2.
Effect of new versions.
that covered code, and if you include a notice stating that
the source code version of the covered code is available
version of the license, you may always continue
under the terms of this license, including
under the terms of that version. You may also choose to
how and where you have fulfilled
a description
the obligations
Once covered code has been published
of
of section
version
collateral
applicable
in which you describe
version
recipients'
code. You may distribute
of covered
code or ownership
license of your choice, which may contain
other
rights relating
of the
than
license
netscape
published
has the
by netscape.
right to modify
No
one
the terms
rights
under
a
terms different
6.3.
Derivative works.
If You create or use a modified
version
of this
license
cutable version does not attempt to limit or alter the recip-
must
ient's rights in the source code version from the rights set
"Mozilla",
forth
"NPL" or any confusingly
the executable
ver-
is not already covered code governed
(a)
rename
Your
"MOZILLAPL",
license
"MOZPL",
by this license), You
so that
the
phrases
"Netscape",
"MPL",
similar phrase do not appear in
sion under a different
license you must make it absolutely
your license (except to note that your license differs from
clear that
which
or any
this license) and (b) otherwise make it clear that Your
version of the license contains terms which differ from the
initial
Mozilla Public license and netscape Public License. (Filling
incurred
in the name of the initial developer, original code or contributor in the notice described in exhibit A shall not of
offered
differ
from
this
license are
by you alone, not by the Initial developer
contributor.
developer
You hereby
agree
and every contributor
by the initial developer
to
indemnify
for any liability
or such contributor
any such terms You offer.
X
to covered code created under this license.
(which you may only do in order to apply it to code which
any terms
Z
C7
the executable
from this license, provided that you are in compliance with
the terms of this license and that the license for the exe-
in this license. If you distribute
_>
to use it
use such covered code under the terms of any subsequent
3.2. The notice must be conspicuously
included in any
notice in an executable version, related documentation
or
to the covered
under a particular
the
as a result of
themselves be deemed to be modifications
of this license.)
117
Z DISCLAIMER OF WARRANTY.
COVERED
such participant
CODE IS PROVIDED
UNDER THIS
ON AN "AS IS" BASIS, WITHOUT
KIND,
EITHER
WITHOUT
sold, distributed,
INCLUDING,
THE ENTIRE RISK AS TO THE QUALITY
or had made, modifications
made by
that participant.
COVERED
CODE
8.3.
AND PERFOR-
MANCE
OF
SHOULD
ANY COVERED CODE PROVE DEFECTIVE IN
IS WITH
YOU.
infringement
claim against partici-
such participant's
directly or indirectly
contributor
initiation
of patent
version
infringes any patent where such claim
is resolved (such as by license or settlement)
infringement
litigation,
prior to the
then the rea-
sonable value of the licenses granted by such participant
under sections 2.1 or 2.2 shall be taken into account in
ANY OTHER CONTRIBUTOR)
ASSUME THE COST OF
ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
THIS DISCLAIMER OF WARRANTY CONSTITUTES
AN
ESSENTIAL PART OF THIS
If you assert a patent
pant alleging that
ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR
determining
license.
the
amount
or value of
any payment
or
LICENSE. NO USE OF ANY
COVERED CODE IS AUTHORIZED
HEREUNDER EXCEPT
UNDER THIS DISCLAIMER.
8.4.
In the event of termination
under
sections
8.1 or 8.2
above, all end user license agreements (excluding distributors
and resellers) which
8. TERMINATION.
8.1.
are
WARRANTIES THAT THE COV-
ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT
FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
THE
under sections 2.1 (b) and 2.2(b)
revoked effective as of the date you first made, used,
WARRANTY OF ANY
EXPRESSED OR IMPLIED,
LIMITATION,
LICENSE
any distributor
termination.
have been validly granted
hereunder
prior to termination
by you or
shall survive
This license and the rights granted hereunder will terminate
automatically
if you fail to comply with terms herein and
fail to cure such breach within
of the breach. All sublicenses
are properly
30 days of becoming aware
to the covered code which
granted shall survive any termination
license. Provisions which, by their
effect beyond the termination
of this
nature, must remain in
of this license shall survive.
9. LIMITATION
OF LIABILITY.
UNDER NO CIRCUMSTANCES
AND
UNDER NO LEGAL
THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),
CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
DEVELOPER, ANY OTHER CONTRIBUTOR,
TRIBUTOR
OF COVERED CODE,OR
OR ANY DIS-
ANY SUPPLIER OF
ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
8.2.
If you initiate litigation
claim (excluding
tial developer
contributor
declatory
Z
C7
X
actions)
(the initial
against
ini-
developer
or
against whom you file such action
infringes
is referred
alleging that:
(a) such participant's
rectly
judgment
or a contributor
to as "Participant")
-O
-O
by asserting a patent infringement
version directly or indi-
WORK STOPPAGE, COMPUTER
FAILURE OR MALFUNC-
OR ANY AND ALL OTHER COMMERCIAL
DAM-
AGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE
BEEN INFORMED OF THE POSSIBILITY OF SUCH DAM-
any and all rights
AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY
to you under sections 2.1
TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT
then
granted
by such participant
and/or
2.2 of this license shall, upon 60 days notice
from Participant terminate prospectively, unless if within
APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME
60 days after receipt of notice you either: (i) agree in
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-
writingto
pay participant a mutually agreeable reasonable
royalty for your
past and future
made by such participant,
use of modifications
or (ii) withdraw your litigation
claim with respect to the contributor
royalty
and
payment
arrangement
AGES, SO THIS EXCLUSION AND LIMITATION MAY NOT
APPLY TO YOU.
version against
such participant. If within 60 days of notice, a reasonable
are not
mutually
10. U.S. GOVERNMENT
END USERS.
The covered code is a "commercial
item," as that term is
1995),
agreed upon in writing
by the parties or the litigation
defined
claim is not withdrawn,
the rights granted
"commercial computer software" and "commercial computer
software documentation,"
as such terms are used in 48
pant to you under sections 2.1 and/or
cally terminate
at the expiration
by partici-
2.2 automati-
of the 60 day notice
period specified above.
ticipant's
contributor
in 48
C.ER. 12.212
C.ER. 2.101
(Sept.
1995).
(Oct.
Consistent
12.212 and 48 C.ER. 22Z7202-1
(b) any software, hardware, or device, other than such parVersion,
directly
or indirectly
infringes any patent, then any rights granted to You by
118
TIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
TION,
contributor
any patent,
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-
(June 1995),
all U.S. Government
consisting
with
through
48
of
C.ER.
22Z7202-4
end users acquire
ered code with only those rights set forth herein.
cov-
11. MISCELLANEOUS•
EXHIBIT A -Mozilla
Public License•
This license represents the complete agreement concerning
subject
matter
hereof. If any provision
held to be unenforceable,
of this
license is
such provision shall be reformed
only to the extent necessary to make it enforceable•
License shall be governed
by California
(except to the extent applicable
erwise),
excluding
its
This
law provisions
The contents
Version
of this file are subject to the Mozilla Public License
1.1 (the "license");
compliance
with
the
you may not use this file except in
License• You may obtain
of the
law, if any, provides oth-
conflict-of-law
provisions•
With
Software
distributed
under the license is distributed
respect to disputes in which at least one party is a citizen
IS" basis, WITHOUT
of, or an entity
or implied• See the license for the specific
chartered
a copy
license at http://www.mozilla.org/MPL/
or registered to do business in
the united states of america, any litigation
relating
to this
on an "AS
WARRANTY OF ANY KIND, either express
rights and limitations
language governing
under the License•
License shall be subject to the jurisdiction
of the federal
courts of the northern district of california, with venue
lying in santa clara county, california,
responsible
for costs, including
costs and reasonable
application
attorneys'
with the losing party
without
limitation,
fees and expenses• The
of the united nations convention
on contracts
for the International
sale of goods
Any law or regulation
which provides that the language of
a contract
shall be construed
is expressly excluded•
As between
Portions
Initial
Developer
created
developer
Alternatively,
and the contributors,
each
are Copyright
the contents
terms of the ___
of its utilization
of rights
under
this
above.
and
under the terms of the [__]
to distribute such responsibility on an equitable
herein is intended
or shall be deemed to
any admission of liability•
"[__]
License"),
] license are applicable
license and you agree to work with initial developer
basis• Nothing
Code
(C)
of this file may be used under the
license (the
or indirectly,
constitute
Original
• All Rights Reserved•
the provisions of [....
contributors
the
by
party is responsible for claims and damages arising, directly
out
of
Contributor(s):
FOR CLAIMS•
initial
The
is
against the drafter shall not
apply to this license•
12. RESPONSIBILITY
The Original Code is
court
in which case
instead of those
If you wish to allow use of your version of this file only
license and not to allow others to
use your version of this file under the MPL, indicate your decision
by deleting
the provisions
notice and other
provisions
above and replace
them with the
required by the [__]
license.
If you
do not delete the provisions above, a recipient may use your version
13. MULTIPLE-LICENSED
Initial developer
CODE.
of this file under either the MPL or the [__]
may designate
code as "Multiple-Licensed".
portions
"Multiple-Licensed"
means
that the initial developer permits you to utilize portions
the covered
code under
license."
of the covered
of
your choice of the NPL or the
alternative licenses, if any, specified by the initial developer
in the file described in exhibit A.
NOTE: The text of this exhibit A may differ slightly from the text
of the notices in the source code files of the original code. You
should use the text of this exhibit A rather than the text found in
the original code/source
code for Your modifications•
m
Z
C7
X
119
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 121 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Sat May 08 04:17:17 2010 Author : Title : Subject :EXIF Metadata provided by EXIF.tools