LG 50PX4DR User Manual PLASMA TV Manuals And Guides 1006694L
User Manual: LG 50PX4DR 50PX4DR LG PLASMA TV - Manuals and Guides View the owners manual for your LG PLASMA TV #50PX4DR. Home:Electronics Parts:LG Parts:LG PLASMA TV Manual
Open the PDF directly: View PDF 
.
Page Count: 132
| Download | |
| Open PDF In Browser | View PDF |
PLASMA TV
MODELS:
50PY2DR
and completely
before
of the TV in the
and relate this
;r¢ice,
iiiiiii_,
Wa mingiCa
ution
m
i
WARNING/CAUTION:
TO REDUCE
SERWC_BLE
THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
PARTS _NSIDE. REFER TO QUALIFIED
SERVICE PERSONNEL.
BACK).
NO USER
the presence
of uninsalated
"_ngerous
the product's
enclosure
that to
may
of suffiThe
lightning flash
with arrowhead
symbol,voffage"
within w_hin
an equilateral
triangle_
is intended
aiertbe the
user to
cient m_gn_ude to constitute
a risk of electdc shock to persons.
,i_lk
The exclamation
important
ance.
point within
o_rating
an equilateral
and maintenance
triangle
(sere'icing)
is intended to a_ert the user to the presence
instructions
in the literature
accompanying
of
the appli _
WARNING/CAUTION:
TO PREVENT
FIRE OR SHOCK
HAZARDS,
DO NOT EX_SE
THIS
PRODUCT
TO RAIN OR MOISTURE
FCC NOTICE
A Class
B
digital
device
This equipment has been tested and found to comply with the [imit_ for a Class B digital device, pursuant to Part
15 of the FCC Rules These Jim,s are designed to provi_
reasonable
protection again_ harmful interference
in
a residential
installatiom
This equipment
generates,
inspired and used in accordance
with the instructions
uses and can radiate radio frequency
energy and, if not
may cause harmful interference
to radio communication&
However, there is no guarantee that interference
will not occur in a particular installation,
ff this equipment does
cause harmfu_ interference
to radio or television reception, which can be determined
by turning the equip_nt
off
and on, the user is encouraged
Reorient
- Increase
to try to correct
or retocate the receiving antenna,
the separation
_tween
the equipment
the interference
by one or more of the following
measures:
and receiver:
- Connect the equipment
into an outJet on a circuit different from that to which the receiver
- Consult the dealer or an experienced
radio,q_v technician for heJp,
is connected.
• Any changes or modifi_tions
not expressly approved by the party responsible
ance could void the user's authority to operate the equipment,
for compli-
CAUTION:
Do not attempt to modify this product in any way w_thout written authorization
fficetbn
could void the user's author_
to o_rate
from LG E_ectronics. Unauthorized
mod-
this product
WARNI NG/CAUTION
TO
REDUCE
RAIN
2
Plasma
TV
OR
THE
MOISTURE,
RISK
OF
FIRE
AND
ELECTRIC
SHOCK,
DO
NOT
EXPOSE
THIS
PRODUCT
TO
Trademark Notice
Aux Etats Unis TV GUIDE et d'autres
et/ou d_une de ses societes
licorice
de Gemstar-TV
marques
relatives
affi[iees_ Au Canada
Guide
_ntemational,
sont des tr_rques
TV GUIDE
deposees
est une marque
deposee
de Gemstar-TV
Guide International
de Transcontinental
Inc.
Inc,
uti_isee sous
inc.
License Notice
Le syste_
TV Guide On Screen est fabdques
Patent
Notice
Le systeme
TV Guide
6,418,556,
6,331,877;
Use of the Cab[eCARD
"Cab_eCARD
This dig_i
direct
TM
to view encrypted
by the cable operator),
est protecJes par
6,154,203;
is capable
of Cable
Gum
ur_ ou p[ueieurs
5,940,073;
TeJevision
of receiving
to a cable system
digital
_icence de Ge_tar-TV
4,908,713;
brevets
4,751,578;
[ntemat_onaL [nc et/ou _u_
emis
aux
Etats
Unis
de s_
comme
societ_s
re 6498,895
4,70,6,121,
_'_TradeMark,
is a trademark
television
connection
On Screen
6,239,794;
_us
basic analog,
providing
programming.
Cable
and data enhanced
Laboratories
digital
such programming,
operator
television
enhan_
service
inc."
_sic
and digitaJ premium
A security
program
may require
cable television
programming
card provided by your cable operator
(For example,
electronic
program
by
is required
guide
provided
the use of a set top box. For more information
con-
tact your [ocaJ cable operator.
Owner's
Manual
3
Wamin_Caution
IMPORTANT
important
or sheet,
ratus
SAFETY
safety
INSTRUCTIONS
instructions shall be provided
or be Iocatec{ before
This inferm_ion
The important
included
any operating
w_h each apparatus,
inst_ctions
shatl be given in a langua_
safety
where apptisabEe,
adding statements
acceptable
instructions shall be ent_led
and, when used
i_lustrates the intent
of a specific
1, Read these
instructions.
2. Keep these
instructions.
safety
to the country
'Important:
Safety
shall be verbatim
after the end of the foilowing
This information
shat[ be given
in an instruction for ins_Hation
where the apparatus
is intended
instructions". The following
safety
as fellows.
safety instruction
Additional
safety information
iist, At the manufacturer's
instruction may be placed
in a separate
for use and supplied
immediately
adjacent
option,
to that _fety
wi_
booklet
the appa _
to be used.
instructions shag be
may be included by
a picture
or drawing
that
instruction :
3. Heed all warnings,
4. Follow all Instructloas_
5. Do not use this apparatus near water,
6. Clean
only with d_
7. Do not block
cloth.
any ventilation
openings.
Install
in accordance
with the manufacturer's
instructions.
8, Do not install near any heat sources such as radiators, heat registers_ stoves_ or other apparatus (including
fiers)that
pr_uce
ampli-
heat
9_ Do not defeat the safety purpose of the polarized or grounding4ype
plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong_ The wide blade or the
third prong ate provided for "yoursafety. If the provided plug does not fit into your outlet, consult an electrician for
rep|aeement of the obsolete outlet.
1;0_ Protect
point where
the power
cord from _ing
they exit from
walked
1;1. Only use attachments/accessories
specified
12. Use only with the cart_ stand,
tripod,
When
when
a cart is used,
use caution
Plasma
TV
pa_icu|arly
at plugs,
convenience
receptacles_
and the
by the mantifacturer;
bracket_ or table
moving
PORTABLE
4
on or pinched
the apparatus.
the
CART
spacified
cart_apparatus
WARNING
by the manufacturer_
combination
to avoid
or sold with the apparatus.
injury from tip-over.
Safety Instructions
13. Unplug
this apparatus
14. Refer all servicing
during
lightning
to qualified
service
in any way, such as power-supply
the apparatus,
15. CAUTION
Most
the apparatus
concerning
appliances
is, a single
additional
outlets
this owner's
Do not overload
wall outlets,
cracked
result
unplug
Protect
are dangerous.
power
particular
cord exits
appliance
cords,
of time.
the apparatus
or objects
normally,
has been damaged
have fallen
into
or has been dropped.
circuit;
that
and has no
page of
indicates
examine
damage
physical
closed
to plugs,
wall outlets,
or
conditions
could
the cord of your
or deterioration,
and have the cord replaced
servicer.
or mechanical
in a door,
loose or damaged
or damaged
Any of these
part by an authorized
cord from
pinched,
attention
when
does not operate
upon a dedicated
wall outlets,
power
use of the appliance,
replacement
kinked,
is required
liquid has been spilled
Check the specification
or fire. Periodically
and if its appearance
the
twisted,
for long periods
:
only that
Overloaded
cords, frayed
shock
it, discontinue
with an exact
Servicing
to rain or moisture,
be placed
powers
circuits.
wall outlets.
extension
in electric
unused
to be certain.
wire insulation
appliance,
they
or branch
manual
personnel.
the Power Cord
circuit which
or when
cord or plug is damaged,
has exposed
recommend
outlet
storms
or walked
abuse,
upon.
such as being
Pay
and the point where
the
the appliance.
16. Outdoor Use Marking :
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.
17. Wet Location Marking :
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
18. Any DATA saved on HDD may be lost or damaged, making a back up copy of data is strongly recommended.
The manufacturer will NOT be responsible for any data loss or damage.
Owner's
Manual
5
Contents
Warning/Caution
........................
Digital Cable Compatibility
.........................
Surety Instructions
.............................
Introd uction
Controls/Connection Options .............
Remote Control Key Functions .......
2
3
4~5
Option Menu Features
Advanced
.............................
48
Cinema 3:2 M_e
Setup
................
48
Low Power
.....................
48
LG Lcgo ............................
49
Aspect Ratio Cor_rol .....................
50
Caption .........................
51
Caption / Text ..........................
51
Caption Option
........................
52
iSM Method
........................
53
Front DispJay
..........................
53
Auto Demo
............................
54
Lock Menu Options
Parental Lock Setup .....................
56
CabteCARD
_ Function
Cable menu options .....................
57
_rambIed
channel ......................
57
Cabie Channel List ......................
58
Emergency
Ne_ Messa_
...............
58
Xs"r,_
Recorded TV .......................
59~63
Notes on Memory Card ................
64~67
Photo List ..........................
68-69
Music List ..........................
70_-72
Timeshift
........................
73~74
Recording ...........................
75W7
TV Guide On Screen TM System
........... 78-98
IEEE 1394
........................
9%110
Remote Control
PIP (Picture-in-Pictu_)iPOPiTwin
Picture
Watching PIP/POP/Twin
Picture ..........
11I
_ect_ng an Input Skjr,al_rce
for PIP/Twin P_ure .111
Swapping PIPfTwin Picture
...............
iil
TV Program Selection for PiP ............
111
Moving the PIP sub picture ...............
112
FA1UpSflng
Main and Sub P#_ure S_es for Twin Pic_Jre .i12
(Picture-out-of-Picture:
Channel Scan)
. .112
APM ................................
113
Bned Info.............................
114
EZ Mute ..........................
115
Screen Setup for PC mode ...............
116
8--il
12--13
Installation
Accessories
......................
14
InstaJlation instructions
Joining _e TV assem_ to lJ'_ walt to p_th_
set _m =
bling ...............................
14
Install the RING SPACER with the bo_ on the set
as shown
.............................
15
Remove or A_e
the Ra_e Cover ..........
17
Swivel function .........................
18
Arrangement
wires
......................
18
External Equipment
Connections
...........
19~25
A_enna
or Cable Connection
...........
19_20
VCR Setup
E_terna_
NV%dr_'g;t;_p": : : ',: [ : : : : [: [ : :.20.21
DVD Setup ............................
CableCARD _' Setup
.....................
HDSTB Setup
........................
PC Setup
...........................
Monitor Out Setup
......................
Digital Audio Output
....................
HDM_ ...............................
TV Gui_
On Screen Setup
..............
21
22
22
23-24
25
25
26-28
29~35
Operation
Turning the TV On .....................
36
HOME Menu ...........................
37
TV Setup
............................
38-56
On-screen
Menus Language Selection
.......
38
Setup Menu Options
EZ Scan (Channel Search) ................
39
Manual Scan
..........................
39
Channel Edit ...........................
40
DTV Signal Stren_
.....................
40
Channel Label Setup
.....................
41
Main Picture Source Selection
..............
41
input Label ............................
41
Video Menu Options
EZ Pic_re
........................
42
Manuat Pic_are Control (Custom Option)
......
42
Color Temper_ure
Control
................
42
Video Reset
.......................
42
Audio Menu Options
Audio Language
.........................
43
EZ Soundtlr_e / EZ Sound ................
43
Manual Sound Control (custom Option) .......
44
Front Surround
...........................
44
TV Speakers On/Off Setup ...............
45
Stereo/SAP
Broadcasts
Setup
.............
45
BBE ..................................
45
Time Menu Options
Auto Clock Setup
.......................
46
Manual Cbck Setup
.....................
46
On/Off Timer Setup
......................
46
Sleep _mer / Auto Off ....................
47
After
6
Plasma
TV
reading this manuat,
External
Control
IR Codes
Device
Setup
Programming
the Remote
Programming
Codes
Troubleshooting
Maintenance
Checklist
.....................
.......................
.................................
reference,
125
1_q27
128
129
........................ 130
..................................
keep it handy for future
117q22
123~124
.....................
Product Specifications
Warranty
..............
................................
131~132
introduction
Ion
What is a Plasma
Display
Panel (PDP)?
A plasma display panel is the latest display technol_y
and the best way to achieve fiat panef displays with exeeffent image quality
and large screen sizes that are easily viewabte, The POP can be thought of as a descendant of the neon [amp and it can be also
be viewed as a series of fluorescent _amps,
How
does
it work?
PDP is an array of eel[s, known
as p[xels, which
are comprised
of 3 sub pixeEs, corresponding
to the coiors
red, green, and blue_
Gas in a plasma state is used to react with phosphors
in each sub-pixel to produce co_ored fight (red, green, or blue)_ Theee
phors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors
You get the dch_ dynamic
16 million different colors
inches thick.
colors that you expect
Each sub-pixel
All of these mean that you get perfect
phos-
is: individually
controlled by advanced electronics
to produce over
images that are easily viewab[e in a display that is less than 5
160° - Wide angle range of vision
Your flat panel plasma screen offers an exceptionally
broad viewing angle -o over
clear and visible to viewers anywhere in the room who can see the screen.
Wide
160 degrees.
This means that the display
is
_reen
The screen
of the Plasma
Display
is so wide that your viewing
experience
is as if you are in a theater.
Multimedia
Connect your p_as_
display to a PC and you can use _ for confer_ncing,
feature allows you to view your PC and video images simul_neously.
games,
and tntemet
browsing.
The Picture-in-Picture
Versatile
The right weight
fit
The
PDP
and thin size n_kes
it easy to install your plasma
Manufacturing Process:
a few
minute
display
in a variety
of locations
colored dots may be present
where conventional
on the
PDP
TVs will not
screen
The PDP (Plasma Display Panel), which is the display device of this product, is composed
of 09 to 2.2 million cells. Afew cell
defects will normally occur in the PDP m_nufactudng
process. _veral
tiny, minute colored dots visible on the screen shoutd be
accepSable. This also occurs in other PDP manufacturers'
produc*_. The tiny dots appearing
does not mean that this PDP is defective. Thus a few cell defects are not sufficient cause for the PDP to be exchanged
or returned. Our production technology
minimizes the_
ce_f defects during the manufacture
and o_ration
of this product.
Cooling
Fan
Noise
in the same way that a fan is used in a PC computer to keep the CPU (Central Processing
Unit) cool, the PDP is equipped with
cooling fans to cool the Monitor and improve its re[i_ility.
Therefore,
a ce#.ain levet of noise could occur while the fans are oporating and cooling the PDP.
The fan noise doesn"t have any negative effect on the PDP"s efficiency or reliability: The noise from these fans is normal during the
oper_ion
of this product. We hope you understand that a ce_n
leve_ of noise from the coo_ing fans is acceptable and is not suffi =
cient cause for the PDP to be exchanged
or returned.
OwneYs
Manual
7
Inlroduction
• This is a front panel of 50PY2DR, 50PY2DRH, 60PY2DR_ 60PY2DRH series TVs.
This is a simplified representa_on
of a front panel
Here shown may be somewhat different from your TV_
- This manual explains the features available on the 50PY2DR,
Front
50PY2DRH,
60PY2DR,
60PY2DRH
series TVs
CHANNEL
Panel Controls
Button
_'tton
Button
Memory Card
Slots 1,2
A
@
!t
i
Remote
Control
Sensor
.......
_NDEX
Switches
LED Display
Power Standby
Program
Display
on or off
_[luminates orange in standby
When the TV is turned on,
the indicator wilU blink green
seconds
RGB-PC(or
=_
IF_EEl394
I_
HDMII/DVI
I (_=_)
8
Plasma
TV
Antenna
RGB-DTV)
mode
mode
mode
or 2 mode
or Cable
_
____y_
or HDM[2
Component1
_.
Indicator
mode
Video or Front Video
mode
before the picture
,@IB_
for 3°4
is seen.
On recording
On pSaying
On operating
_=-._,_
mode,
the TimeShift
State of setting
On operating
the reserve
the xs_
recorc
mode
Introduction
This is a back panel of 50PY2DR, 50PY2DRH, 60PY2DR, 60PY2DRH series TVs.
Back Connection
Panel
S-VIDEO Input
is available to provide
better picture quality than the video
input.
VIDEO Input
Connects the video
video device
signa_ from
a
AUDIO Input
Connections
are available for listening stereo sound from an extema_
device,
RS-_2C
INPUT
(CONTROLfSER-
vicE) PORT
Connect
232C
DVHS
an
IR controller
Connect your wired
remote control here.
port on a PC_
_E1394
Connect
G-LINK
Connect
Remote Control Port
to the RS-
DVD/DTV input
RGBiAUDIO
INPbq"
(Cc_po_t
1-2) _Vtdeo
Conneat a com_
Connect the moniinput
portent
Conn_ S_
tor output from a
video/audio
PC to the appropri- device to these
Video out from
or
MicroMV to
IEEE1394
Connector.
ate input port,
jacks,
Input
over4he-
air signals
an S-VIDEO
device_
to this jack.
Antenna
Connect
to this
CableCARD
TM
Used for
CaMeCAR D TM
received Cable
Sewice
Provider.
L
Digital
Digital
H_I1iDVI(VIDE
O)_ HDMI 2
Connect a HDMI
signal to
HDMHiDVI
HDMt2 Or
DVt(ViDEO)
or
sig _
na_ to HDMI1/DVl
port with DV_ to
HDM[ cable.
Audio
Visual
(DVh
lnterface/Compon
ent2) Input/
/
Audio/Video
InpUt
Connecff audio/video
output from an exterhal device to these
Monitor Output
Connect a second
TV or Monitor,
jacks
Digital Audio
Output
Connect
digital
audio from various
CABLE
Conn_
cable signals
jack, either directly
types of equipment,
Note; In standby
or through a
came box.
Power Cord
_is
mode,
fhese
work.
input
to this
ports will no_
_
operates
Socket
on an AC power_ The voftage
indicated on the Specifications
to operate
is
page, Never attempt
the TV on DC power.
Note:
- After removing the cover: you can inert
the CableCARD
TM
or connect to the G-LINKjack.
OwnePs
Manual
9
Inlroduction
• This is a front panel of 50PX4DR, 50PX4DRH series TVs,
-This is a simplified representation
of front panel
Here shown may be somewhat different from your TV
Front
Panel
Controls
INDEX
LED
Display on
or off.
CHANNEL
VOLUME
MENU
TViVIDEO
Plasma
TV
Buttons
Power Standby
Button
illuminates
Button
mode,
TV GUIDE Button
Remote Control
Sensor
POWER Button
t0
(*tJ_)
(V, A) Buttons
When
_ndlcator
orange
in standby
the TV is turn_
on,
the indicator will blink green for
3-4 seconds
seen,
before
the picture is
fnlroduction
This is a back panel of 50PX4DR, 50PX4DRH series TVs,
Back Connection
Panel
S-VIDEO
is available to provide
better picturequality than the video
input.
VIDEO Input
Connec.f_ the video signal from a
vi_o device
AUDIO Input
RGB/AUDIO
IEEE1394
Connect
MicroMV
DVHS or
to tEEEl_394
INPUT
Connect the monitor output
connector from a PC to the
appropriate
Route
Control
Port
Connect your wired
remote control here,
input port
Connector,
DVDIDTV
G-LINK TM
Connect an IR
controller to this
Input
(Component1-2)
RS-2320 INPUT (CONTROL!SERVICE) PORT
Connect to the RS=232C
port on a PC.
Connect a component
video/audio
device to
these jacks.
jack_
S-Video
Connect
Input
So
VUDEO in
CableOARD
Used for
Digital
Visual
TM
Audio
(DVh
CableCARD TM
received from Cable
Interface/Component2)
Input/
Service
Digital Audio Output
Connect
digital audio
Provider.
Digital
AudiolVideo
i_
Conn_
audio/video
from
NDMI1!DVI,
HDMI 2 various types of equipment,
Connect a HDMi sig- Note: tn standby mode.
nal to HDMH/DW
or
these ports will not work.
HDMI2, Or connect a
DW(Video)
HDMI1/DVI.
signal to
output from an
extema_ device to
these jacks
Antenna
Input
Connect over-the*
Vim
out from
an SoV_DEO
device to the S _
air signals
to this
L
Monitor Output
Connect a second
TV or Monitor.
CABLE
Input
Connect cable signals to this
_ack, either dkectJy or through
a cable box,
Power
Cord
Socket
This TV operates on an AC power. The voff.age
is indicated on the Specifications
page. Never
attempt
to operate
the _FV en DC power,
Owner's
Manual
1I
Inlroduction
-
When
using the remote
contro_, aim i_ at the remote
contro_ sensor
X._/%'CRiDVD
Turns your TV or any other prograJT_med
equipment
on or off, depending on mode.
Xs_
and
adjust the system
settings
to your preference
control
buttons
record or trick play:
(Refer to p,61_ 74)
. Use for Photo mo_
or Music m_e
of x_-r_,
(Refer to p.69, 72)
° Controls the DVHS or Camcorder
iEEE 1394 modem
- Controls some video cassette
Bring up the HOME menu to the screen,
THUMBSTICK
(Up/Down/Left/Right/ENTER).
Allows you to navigate the on-screen
menus
on the TV,
in
recor_rs
ot DVD players when you
have already selected DVD or VCR
mo_
button
_.
_
Moves the Listings Grid forward or
backward in 24 hour increments.
Ap_ar
the thumbnail
recorded
VOLUME
Increases/decreases
the sound
{ist.
level.
CHANNEL
UP/DOWN
Selects available channels
found dur-
ing Manua_ scan,
PAGE UP/PAGE
DOWN
Mows
from one full set
of screen
information
to the next one.
RATIO
Changes
the aspect
ratio,
SAP.,..
Selects MTS sound: Mono, Stereo, and SAP
-----_...
in Analog n_de, Change the audio tanguage
in DTV mode,
NUMBER buttons
Tunes
to the _ast channel
viewed.
SOUND
Selects the sound appropriate
program's
character.
for the
Select a dosed caption:
Off, CCt ~4, Text1 ~4,
[Adaptive
Picture Mode)
Concurrently,
compare with the
MiC
Remove the Me_
Card.
Daylight, Normal, Night Time and
Custom on the screen.
(Refer
Hluminates
the remote
buttons
t2
Plasma
TV
LIGHT
control
of selected
mode,
to p.113)
introduction
TV INPUT.
* Rotates
the input mode
between Antenna
and Cable
\._
x,
° Video_ Front Video, Component
1-2, RGBDTV (or RGB-PC),
HDMI1/DVI,
HDMI2
and EEE1394
input sources, screen
re.ms
to the tast TV,
External input modes rotate in regular
sequence:
Antenna, Cable, Vid_,
Front
Video_ Component
1-2_ RGB-DTV
(or
RGB-PC),
HDMI1iDVl
and HDMI2 input
sources
Selects the remote operating mode: TV,
DVD, VCR, AUDtO_ CABLE or STB, Select
other operating
modes,
operate
(Video, Front Video, Component
sources are linked automatically,
these are connected
)
for the remote to
extema_ devices.
1-2 input
only if
_UIDE
Brin_ up the TV Guide On Screen system to the, screen.
Brings up the main menu to the screen,
Enters ot exi_ a Panel Menu in the TV Guide
On Screen system.
Clears
When you watch the TV, information displays on top of the screen, Not available
in Com_nent
1-2, RGB, HDMH/DW
and
HDM_2 mode.(Refer
to p.114)
all on-screen
displays and returns to
TV viewing from any menu,
Switches the sound on or off(Refer
Selects
the wanted
Scrolls
the Favorite
functions.
to p,115)
channels,
Lets you select the a_unt
of time before
your TV turns itself off automatically.
PIP
Switches
to PiP, POP (Picture-out-ofPicture) and Twin picture modes in regular sequence,
Switches
the video window locking or
unlocking in the Lislings Grid.
ADJ
Adjusts
screen
position_ size, and phase in
PC mode.
Chants
channel
EZ
Adjusts
depending
Starts
the factory
on the viewing
the demonstration
• Open
the b_el3,
preset
picture
environment.
Selects the inp_ source for the sub piclure in PIP/Twin picture mode,
AUTO
to explain the main
features of this TV,
compar#nent
to the next higher/lower PiP
cover
Exchang_
the main/sub
PiP1%win picture mode.
images
in
on the back side and instatl the batteries
matching correct _lar_ty (+ w_h +, - with _).
• Install two 1.5V AA batteries. Don't mix old or used battenes
Close cover,
w_h new ones,
Owner's
Manual
13
Installation
!
I
Ensure
where
that the following
you purchased
Owners
D-sub
accessories
are included
Manual
ptasma
Batteries
15 pin Cable
75E2 Round
6-RING
G-LINK
wffh your
display,
tf an accescory
is missing,
please
contact
the _ater
the product.
Cable
Remote
Cable
2-Wall
brackets(50")
SPACER
(Only 60PY2DRJ60PY2DRH
series)
Control
6- bolts
(Only 60PY2DRI60PY2DRH
series)
Power Cord
2-eyeobolts(50
2-Wail
brackets(60
_')
)
2-TV brackets(60')
i
Secure
the TV assembly
Here shown
by joining
may be somewhat:
it to a wall by using the TV/Wall
different
4
t4
Plasma
TV
brackets,
from your TV,
• ff the set wi_ be mounted on a desk top, insert
the 2 eye-botts and tighten them securely in the upper
holes as shown,
Install the wa[i brackets on the wall with 2 bo_*, (not
supplied with the product), as shown.
Match the height of the eye-bolts and the wail brackets.
Check to be sure the eye bolts and the brackets are
tightened securely.
i
Installation
Ffthe set wi_J be mounted
er on the TW
on a desk top, instal_ the 2 ring spac-
And then install the TV brackets
on the ring spacer
InseCt the 2 boP_sand tighten secutely,
the brackets,
Instat_ the wal_ brackets
on the wall with 2 bolts*,
ptied with the product).
Match the height of the TV brackets
Check to be sure the brackets
as shown.
in the up_r
holes on
(not sup-
and the wall brackets.
are tightened
securely,
Note: Bolts and RING SPACER comrr_nly use for fixing the
TV bracket or connecting the wall mounting bracket.
'1
I
I
I
1
. If the set will be mounted on a desk top, insert
the 2 eye-bolts and tighten them securely in the upper
holes as shown_
InstaJ_ the wa_l brackets on the walt with 2 _lts% (not
supplied with the product), as shown.
Match the height of the eye-bo_ts and the watl brackets,
Check to be sure the eye-bolts and the brackets are
tightened
secu re_y.
* _ure
strings
the TV assembty to the wall with strong
or wire cables, (not supplied with the prod-
uct), as shown
.....
ii
1_ Put the RiNG SPACER
;
.....
,
,',d/
....
2 When you connect
in the holes of the bolts
,,vail mounting
before connecting
to the set, connect
to
the wait mounting
bracket.
the
bracket
to it
by using the 6-bolt_,
i, s
(supplied
with the
product},
as shown
...........
ll Fj"
Note.: Bolts and RING SPACER
commonly
use for fixingthe TV bracket
or connecting
the wall mounting
bracket.
Owner's
Manual
15
Installation
• The TV _n be instaJled in various ways such as on a desktop etc.
. The TV is designed to be Hunted
horizontally
• It is recommended
that 50PY2DR, 60PY2DR, 50PX4DR modeJ only be used at an aJtitode of less than 3281 feet (lO00m)
the best qual_ picture and sound
•
It is recommended
that 50PY2DRH 69PY2DRH,
get the best quality picture and _und.
-This manual
Here shown
50PX4DRH
mode_ only be u_
explains the fe_ures
available on the 50PY2DR,
rr_3y be somewhat
different from your "H.
_PY2DRH,
at an altitude
60PY2DR,
of tess than 6561 feet (_m)
60PY2DRH
series TVs.
GROUNDING
Ensure
electric
that you connect the earth ground wire to prevent possible
shock. If grounding
methods are not possible
have a qualified
electrician
install a separate
unit by connecting
circuit
it to telephone
breaker.
wires,
Do not try to ground
lightening
the
Sho.rtocircuit
Breaker
rods, or gas pipes.
For proper
ventilation
allow
a clearance
of 4" on each side and the top, 236"
the bottom,
installation
optional
To Install
Pedestal
instructions
Desktop
Plasma
TV
are included
Stand
in the
[nstaliation..
on a _sktop
mount
altowableciearances
t6
on
and 2' from the wa_L Detailed
minimum
for adequate
ventilation
to get
to
Installation
This function explains the features available on the 50PY2DR,
. When moving or connecting the power cord, be used the these
. And after re_ving
the plate cover; you must ins_[
/
the _N
50PY2DRH,
methods.
brackets
60PY2DR,
60PY2DRH
sedes TVs
on the wait.
//
1_ With hands, push the lower left/right
then pu_[ out to the front,,
2. Connect
the power cord on the TV's back.
3. In attaching
in_
of plate cover _d
the pEate cover, align the guide to the bush-
and press the cover in place with your hand.
Owner's
Manual
17
Installation
- This func_on explains the features available on the 50/60PY2DR,
50!60PY2DRH
sedes TVs.
• After instaJ[ing the TV, you can adjust the the TV set m_nua[Ey turning it to the Jeff or dght direction
viewing position.
by 20 degrees
to suit your
Note: Before adjusting the angle, you must loosen (to the left) the shaft boll on the middle of stand'e back.
And when you acheve the de&#-ed position, you must c/o_ the shaft be# to set the hole(As shown below)
!iiiii_iii!ii_i!!i!!i!!ii;ii_i_iiiiiiiiiiii_!i_iiiiii_!i!_!_!%ii!!!_i_i!i!i!ii;ii_i;_;_i_i_i_i
!_I_
i_...d
- This function explains the features available on the 50i60PY2DR,
• Run the accessory device wires inside the JACK MANAGEMENT
t8
Plasma
TV
50i60PY2DRH
series TVs,
pole as shown,
Installation
1. Analog and Digital TV signals provided on antenna
-
Wail Antenna
For optimum
Socket
picture
or Outdoor
qual@,
Antenna
adjust antenna
wffhout
a Cabie
direction
Box Connections
ff needed,
f
o,,_
Mu[tifamity
Dwei_ings/Apa_ents
(Connect to wail antenna
wait Antenna
socket)
N
Bronze
Wire
Turn cl;c_kw _ to t_hlen.
UHF Antenna
VHF Antenn_
Bronze
careful
connecting
notto
Wire
bend the bronze
wire when
the antenna,
%
J
/
2. Analog
and
Digital
TV
signals
provided
on cable
/
Cable TV Wall
Turn clockwi_
RF Coaxia_ Wire (75 ohm)
to tighte_,
[
[
t
Owner's
Manual
19
Installation
3_ Ana|og and Digital TV signals provided on cable and antenna
/'_
Antenna
Bronze Wire
,
RF Coaxial
Wire (75 ohm)
Turn clockwNe to tighten.
Cable TV Wall
dac_
RF Coaxial
Wire
(75 ohm)
I
Bronze Wire
• To improve the picture quality
ptease
•
Note:
-
!
a signal
in a poor signa_ area,
amplifier
_d
inst_
•
If the antenna needs to be split for two TV's,
Way Signal Splitter'' in the connections.
•
If the antenna is not installed
er for assis_nce.
properly,
property.
install a "2-
contact
your deaF-
#
The TV will let you know when the analog,
To avoid picture noise (interference),
Use the ISM Method (on the Option
time.
purchase
If the 4:3 picture format
cable
and digital
channel
leave an adequate distance between
menu} feature to avoid having a fixed
is used;
the fixed
images
scans
are complete,
the VCR and TV
image remain on the scr_n
on the sides of the screen
may remain
visible
for a long period
on the screen.
Connection
Option 1
Set:VCR output switch to 3 or 4 and then tune
PC to the same channel number
Connection
1, Connect
Option
2
the audio and video
cables
from the
VCRs output jacks to the TV input jacks,
shown in the figure
as
When connecting the TV to VCR, match the
jack colors (Video = yellow; Audio Left = white,
and Audio Right = red)
ff you connect an S-WDEO
output
from VCR
to the S-WDEO inp_, the pi_ure quality is
improved; compared
to connecting a regular
VCR to the Video input.
2 Insert a video tape into the VCR and press
PLAY on the VCR.. (Refer to the VCR owner's
manuaL)
3, Select the input source with using the
WlMIDEO
button on the remote contro_ (If
connected to AN iNPUT _select Video
input
sou rce)
Do not connect
S-Video
20
Plasma
TV
to both Vi_o
at the same 8me.
and
[]
[]
VCR Rear
of
Installation
How
to connect
Conn_
the audio and video cables from the e_ernal
equipment's output jacks to the TV input iacks, as shown in the
figure.
When connecting
the _
to external equipment,
match the
}ack colors (Video = yellow Audio Left = white and Audio
Right = red).
How
to use
1. Sebct the input source with using the TV/VIDEO
button
the remote control. Note that this TV finds the connected
on
inp_ sources automaticalEy for Video 1 o2 and Component
12. it is presumed
that RGB, HDMH/DW
and HDMI2 sources
are connected
2. Operate the corresponding
tion instructions
to operate
see page 29_
external equipment.
For connecthe TV Guide On Screen system,
o Game
Set
DVD
or
How to connect
1. Connect the DVD video o_.qtputs (Y, PB, PR) to the COMPONENT
(Y, PE_,PR} INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO {NPUT jacks on the TV, as shown in the figure.
2 ff your DVD en_y has an S-Video output jack, connect this to the SWIDEO input on the TV and connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as shown in the figure.
Note: ff your DVD player does not provide eomponenl
video output, use SoVideo output.
HOW to I,ise
1. Turn on the DVD player and then
2, Use the TViVIDEO
button on the
the Video or Front Video extema_
3, Refer to the DVD player's manual
insert a DVD,
remote control to sele:t Component
input source)
for operating instructions,
1 or Component
2
(if connected
to S-VlDEO_
select
• Component Input _rts
To get better picture quality, connect a DVD, player to the component input ports as shown
below.
Component
ports
on the TV
Video output
po_
Notes:
. Digital Audio wil! not work for Component
1 input eouree_
= Digital Audio oF_ration has priority ff Digital Audio and AUDIO
are connected
at the same time,
L/R
on DVD player
Owner's
Manual
2I
Installation
How
to
use
insert the Cab_eCARD TM _'eceived from the cabie service provider to the
CableCARD
_ slot of _¢ back panel
if the pairing information
Bout this "PV _d the CabieCARD
is autematJo
catiy disptayed on the screen, co,tact
with the cable service provider.
Note :
* CableCARD TM have the types of Motorola, Scientific Attanta, SCM etc_
These 3 types of CableCARD
_ can be used for this PLASMA
TV
Caution:
When rem#ving the C_eCARD
", do not
drop it _ this may cause damage to the
Cab[eCARD
_.
This TV can receive Digital Over4he-aidC_le
signals without an external digital set4op box. However, if you do receive
signals from a digital set4op box or other digita_ external devil,
refer to the figure as shown below.
- This TV suppo_
HDCP (High-b_dwidth
Digital Contents Protection)
protocol for Digital Contents (480p 720p 1080i).
D[gita|
How
Set4op
Box
to connect
Use the TV's COMPONENT
(Y, PB, PR) tNPUT, RG£, HDMH!DVl
or NDM]2 jack for video connections,
depending on your set4op
box connector. Then make the corresponding
audio connections.
HOW tO use
1, Tt, m on the digital set4op box, (Refer to the owner's m_nual for
the digita_ set4op box_)
2_ Use TViVIDEO
on the remote contro_ to select Component
1,
Com_nent
2, RGB-DTV,
HDMIi/DVI
or HDMI2 source,
22
Digital
Plasma
TV
Siena!
480i
Com_nent
Yes
480£
720p
1080i
Yes
Yes
Yes
1/2
RGB-DTV, HDM!1113VfHDM!2
No
Yes
"Yes
Yes
Installation
- This TV provi_s
The TV perceives
card accordingly.
Plug and Play capabi[ity, meaning that the PC adjusts autom_aticaHy to the TVs settings.
640x480, 60Hz as DTV 480p based on the PC graphic card, change the _reen
scanning
rate for the graphic
How
to connect
1_ Connect
the PC to HDMI1!DVI
_fyou do not need to connect
2
ff the PC(or the sound
TAL AUDIO(OPTiCAL)
How
an HDMFto-DVI
HDM_2 port is aJso available
card of the PC) has a fiber optic digital
cable(not
supplied
w_h this product),
for the DW video conneotien,
audio
output
connector,
connect
the PC's audio output
to D_Gi-
port for DVl INPUT,
3. _f the PC(or the sound
port located
port of this TV _th
audio,
card of the PC) has an _alog
on the right side of RGB INPUT
audio
output
connector,
connect
the PCs
audio output
to AUDIO
INPUT
or brightness
in PC
port.
To Use
1. To get the best picture
2. Select
HDM[1iDV_
TV/V[DEO
button
quality,
adiust the PC graphics
input source
in m_n
is also available
tf noise
brightness
changed,
is present,
and contrast
change
change
may be noise assodated
the PC output
on the VIDEO
the PC graphic
card to 1024x768,
of SETUP
60Hz.
menu.(Refer
to R41)
for this purpose,
3. Check the image on your TV. There
mode,
input option
menu
to another
with the resolution,
resolution,
until the picture
card or consuit
change
ver_cal
is ciear_ if the refresh
the n_nufacturer
pattern
the refresh
contrast
rate to another
rate of the PC graphic
of the PC graphic
rate or adjust the
card can not be
card_
How
to connect
1. Connect
the PC to RGB iNPUT
2. tf the PC(or the sound
port located
How
I
port of this TV with a RGB cable,
card of the PC) has an analog audio
on the right side of RGB iNPUT
output
conne_or,
connect
the PC's audio output
to AUDIO
INPUT
po_.
To Use
To get the best picture
2_ Select
RGB-PC
quafity,
input source
Once you se_eot RGB-PC
3 Check
mode
the image
If noise
brightness
changed,
and contrast
card to 1024x76&
in main input option of SETUP
in main input apron
on your -Fv'. There
is presenL
change
adjust the PC graphics
change
may be noise
the PC output
on the VIDEO
the PC graphic
of SETUP
menu, TV/VIDEO
associated
to another
menu until the picture
card or consult
60 Hz,
menu_(Refer
to R41)
button
is also available
with the resolution_
resolution
is dear.
the manufacturer
change
vertical
the refresh
If the refresh
of the PC graphic
for this purpose_
pattem_ contrast
rate to another
rate of the PC graphic
or bdghtt_ess
in PC
rate or adiust the
card can not be
card.
Owner's
Manual
2,3
Installation
Monitor
Display
Resolution
720x400
Specifications
Horizontal
Frequency(KHz)
(RGB-PC)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31.469
70.08
35.156
56.25
37.927
85.03
37.879
60.31
31.469
59.94
48.077
72.18
37.861
72.80
46.875
75.00
37.500
75.00
53.674
85.06
43.269
85.00
48.363
60.00
56.476
70.06
60.023
75.02
800x600
640x480
1024x768
Monitor Display Specifications (RGB-DTV)
Resolution
720x480
Horizontal
Frequency(KHz)
31,47
Vertical
Frequency(Hz)
59.94
31,50
60
45,00
60.00
44,96
59.94
33,75
60.00
33.72
59.94
1280x720
1920x1080
Monitor Display Specifications (HDMI-PC)
Resolution
640x480
800x600
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31,469
59.94
37,861
72.80
37,500
75100
43,269
85.00
35.156
56.25
37,879
60.31
48,077
72.18
46,875
75.00
53,674
85.06
Monitor Display Specifications (HDMI-DTV)
Resolution
720x480
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31.500
60
31.469
59.94
45,00
60.00
44,96
59.94
33,75
60.00
33,72
59.94
1280x720
1920x1080
24
Plasma
TV
Resolution
1024x768
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
48,363
60.00
56,476
70.06
60.023
75.02
Installation
The TV has a s_cia]
signal output
hook up the second TV or monitor.
capability
Connect
to the TV's
the second
TV or monitor
PUT. See the Operating
further devils regarding
which
afiows you to
MONITOR
OUT-
ManuaJ of the second TV or monitor
the device's input settings.
for
Note
,, Component_ RGB-PC/_GB-DT_
HDM! 1!DVt, HDMI2,
sources cannot be used for Monitor out.
DTV input
o When connecting
with extemat audio equipments,
such as
amplifers or speakers, please turn the TV speak_ers otf,(Refer
p.45)
to
Send the TV's audio to _xternal audio equipment via the Digital Audio
Output (Optical) port.
How
to conn_t
1. Connect
(Optica 0
2. Connect
cal) input
one end of an optical cable to the TV Dig_taJ Audio
Output _rt.
the other end of the optical cable to the digi_
audio
on the audio equip_rrL
3. Set the "_.er
page 45.
See the external
Note:
option
_ ¢_'
audio equipment
in the AUDIO
instruction
menu.
manual
(opti-
Refer to
for oper_ion.
When conne_ing
with external audio equipment&
such as
arnplifers or _eakers,
please turn the TV speakers off,(Refer
p,45)
Caution;
to
Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
Owner's
Manual
25
Installation
HI_
_FINI_ION
MLiLTI_D_
- HDMF_, the HDMi
iiN'r_ACE
logo and High-Definition
- This TV can receive
- This TV supports
the High-Definition
Muffimedia
Multimedia
HDCP(High_bandwidth
Digi_l
Interface
is a trademark
Intefface(HDMI)
Contents
or registered
or the Digitat Visual
Protection)
Protocol
trademark
of HDMI
Licensing"
lnterface(DVl),
for 720x480p,
1280x720p,
and 1920x1080i
reso-
lution,
- When
you connect
resolution
this TV with a source
of the source
- If the source
device
device(DVD
player,
wil_ be automatically
device does not support
Set Top Box or PC) supporting
Auto HDMII/DVl,
you need to set the output
To get the best picture quality, adjust the DVD Player or Set Top Box's output
output
resolution
- If the source
to 1024x768,
device
Auto HDMt!DVl
function,
the output
set to 1280x720p.
resolution
resolution
appropriately
to 1280x720p,
_d
the PC graphics
card's
60Hz,
has an HDMI
output,
no other
audio
connection
is necessary
because
HDMFto-HDMI
connection
includes
both video and audio,
- If the source
device has a DVI output
and no HDMI output, a separated
audio
Connect
To
1. Connect
the source
2. No separated
How
connection
device to HDMH!DVI
audio
connection
or HDM_2 port of this TV with an HDMI cabJe(not
supplied
with this product),
is necessary:
To Use
- If the source
device
supports
Auto
HDMI
function,
the output
resolution
of the source
_vice
wil_ be autom.3ticaily
set to
1280x720p.
- If the source
device does not sup_rt
To get the _st
=Select
picture
HDMI1/DVI
TVfMIDEO
button
quality,
or HDMI2
Auto HDMI,
adjust the output
input source
is also available
you need to set the output
resolution
in m_n
of the source
input option
resolution
device
of SETUP
appropdateUy.
to 1280x720p.
menu.(Refer
to R41)
for this purpose.
How
To Connect
1_ Connect
the source
device to HDMI1/DVI
Do not use HDM]2
2, A separated
audio
3, If the source
port of this TV with a HDMI-to-DVI
port for DVl connection
connection
device
if you want to connect
cable(not
supplied
with this product),
audio,
is necessaPy,
has a fiber
optic digital
audio
output,
connect
the audio
output
to DIGITAL
AUDIO(OPTFCAL)
port for DW
_NPU_
4 if the source device
has an analog
audio
output
connector,
connect
the PCs audio
output
to AUDIO
INPUT
port located
on the
right side of RGB _NPUT porto
How
To Use
- tf the source
device
- If the source
To get the _st
- Select
26
picture
HDMII/DVl
_lVlDEO
Plasma
supports
Auto OVl func_on_
device does not sup_rt
button
TV
qualify,
the output
resolution
adjust the output
resolution
of the source
input source in main input option on the SETUP
is also available
of the source device
Auto DVi, you need to set the output
for this purpose.
resolution
device
menu.
will be automatically
appropriately,
to 1280x720p.
(Refer to R41)
set to 1280x720p,
Installation
Cable
sample
f
HDMI
Cable
(not supplied
HDMI
with the product)
to DW Cable
(not supplied
with the product)
Fiber Optic Digital Audio Cable
(not supplied with the product)
Analog Audio Cable(RCA type)
(not supplied with the product)
Analog Audio Cable(Stereo
to RCA type)
(not supplied with the product)
,,J
Owner's
Manual
27
Installation
How
to use
1. Connect
the HDMWDVI
2 Turn on the display
3 Select
HDME1/DVU Input source
4_ Check the image
HDMWDW
refresh
_urce
by pressing
Devices(DVD
the POWER
in Main Input option
on your TV SET, There
Source
Devices
ff noise
rate or adjust the brightness
card can not changed,
change
P_ayer or Set Top _x
button
may _
is present,
and contrast
the PC graphics
or PC) and the TV SET.
on the TV SET and HDMI1/DVi
on the SETUP
noise associated
change
menu.(Refer
with the reso[ution,
the HDMIIiDV[
Source
on the menu until the picture
card or consult
Source
the rr,anufacturer
Devices
remote
control
to P.41)
vertical
Devices
is clear,
pattern,
to another
contrast
teselution,
ff the refresh
of the PC graphics
or bdgh_ess
change
in
the
rate of the PC graphics
card
Notes:
Depending on the graphics card, DOS mode may not work if a HDMtl
to DVI Cable is in use.
- Avoid keeping a fixed image on the screen for a lonq period of time. The fixed image may become
screen, Use the Orbiter feature on the ISM Method menu,
_Zhen Source Devices connoted
to Screen. As shown the picture
HDMI1/DVI
Input: tn case
display, Refer
Source
Devices
is not connected
Cable
or poor cable
PC mode
TV SET Resolution Specification
- 1920 x 1080 _ @ 59.94Hz / 60Rz, 16:9
-1280x
720 P @ 59.94Hz/60Hz,
16:9(preferred
720 x 480 P @ 59.94Rz / 6OHz, 16:9
- 720 x 480 P @ 5&94Hz / 60Hz, 4:3
format)
In This Mode, the Supported PC Resolution Specification
- 640 x 480 @ 59.94Hz
640 x 480 @ 72.80Hz
640 x 480 @ 75Hz
° 640 x 480 @ 85Hz
- 800 x 600 @ 56.25Hz
- 800 x 600 @ 60.31Hz
800 x 600 @ 72.18Hz
800 x 600 @ 75Hz
- 800 x 600 @ 85.06Hz
- 1024 x 768 @ 60Hz(preferred
-1024×
768 @ 70,06Hz
1024 x 768 @ 75,02Hz
28
Plasma
TV
connection_
that Video Resolution
is not supported
TV SET output in HDMtt/DW
to the Manual of HDMI 1/DW Source Devices or contact your service
In This Mode, the Support_
imprinted
on the
_fith HDMtl/DVI
Input, output PC R_.olut_On(VGA,
SVGA, XGA), Positio_ and S_e m_y not fit
below_ press the ADJUST button to adjust the screen Position of TV SET and contact an PC
graphics card service center.
- When Source Devices connected
with HDMI1/DVI
Input. output TV SET Resolution(480p,
E!_/CEA-861°B
Specification
to Screen, if not, refer to the Manual of HDMI 1/DV! Source
ter.
- In case
pe_anently
format)
720p, 1080i) and TV SET Display fit
Devices or contact your service con
"NO SIGNAL"
Source
center;
Devices,
OSD display
"INVALID
in HDMt!/DVi
FORMAT
'_OSD
Installation
The TV Guide On _reen
system uses Setup information to provide you with show
updated severaJ times a day,
- Once you set up the TV according to manufacturer's
in_ructions, you are ready to
To download program listings the TV Gui_
On Screen system needs to be able to
the TV is not in use. Please connect the supplied G-UNK cable to the G-UNK iack
cable you wi_[ be abte to control your c_e
box using the TVs remote.
listings
and ]ineups in your area--which
are
set up the TV Guide On Screen system.
change channels on your cable box when
of the TV. After you connect the G-LINK
Notes:
• The TV Guide On Screen system provides
listings for cable-ready,
broadcast: tt does not provide listings for satellite service&
o You may u_
to connect
directly
without Cable
cable box; and digital
cable
services
as weft as over4he-air
Box,
How to connect Cable Box
or
Cable 8ox Front
Cable Box Rear
Owner's
Manual
29
Installation
Note;
, The G-LINK _ cable is necessary
for the TV Guide
29 for G-LflVK "_ connection
instructions.
On Screen
system
1.Welcome Screen
The TV Guide On _reen
system's
Wetcome
Screen
appears:
-= by pressing the TV Guide key
-- when you power On your TV if you previously skipped
Guide On Screen new s on the Remin_r
Screen.
"Set up TV
The Welcome Screen highlights features of the TV Guide On Screen
system
Press ENTER
to begin Setup.
2,Reminder Screen
The TV Guide On Screen
system's
Reminder
_reen
appears:
-_ after initial TV set up
=- if you power
Off the TV and then F_ower it back On
To make a selection,
and press ENTER.
use the A ,,V button
• *Set up TV Guide On Screen
Press ENTER to begin Setup.
• "Remind
now,
Illi
me to set up later ° re_rns
to highlight
displays
the Welcome
you to watching
- "Don_ remind me a_in"
returns you to watching
reminder _reen
from appearing
upon power On,
How to use
1. Screen
1 : _untry
. This screen asks you the focation
. Use the A I V button to highlight
. Press
30
Plasma
ENTER
TV
to display
Screen
of your TV.
a countp/.
2.
an option,
Screen.
TV,
TV and stops the
to work with your Cable
Box. See Page
Installation
2_ Screen 2: Enter ZIP or Postal Code
Option
1
• If you selected
USA in Screen
• You input numbers
by either
1, you see the ZIP C_e
pressing
or using the A / V button to display
ton to move to another
- Press ENTER
Option
the number
a number,
screen.
keys on the remote
and then the _11_,lll_but-
fieJd.
to display
Screen
Canada
in _creen
3.
2
• if you selected
° You input characters
button to move
to another
field.
• Press ENTER
to display
Screen
3, Screen
1, you see the Post_
by using the A / V button,
Co_
screen
and then the _11_1_
3,
3: Do you have Cable Service
connected?
= if you select Yes, you see Screen 4.
. Jfyou select No, you see Screen 12.
4. Screen 4: Do you have a Cable
Box?
° if you sele_ Yes, you see Screen 5
° if you select No you see Screen 12,
Owner's
Manual
3t
Installation
5, Screen
5: Which
TV
input
is the
cable
box
o if you select Cable, you see _reen
6,
o if you make any other choice, you see _reen
6. Screen
= _ect
6: Cable
the channel
- Press ENTER
Box
Tuning
_reen
7
box
7,
7, Screen 7: Cable Box Configuration
Diagram
• The diagram shows the correct way to i#stalr the G-UNK
the back of the device to the cabJe box.
Make sure the G-L|NK TM Cable is properly
. Press ENTER to display _reen
8,
32
Plasma
TV
into?
Channel
used for the cabte
to display
plugged
lnsta||ed,
Cabte from
Installation
8, Screen
8: Cable Box Brand Name
• Use the & / V button to select a cable box brand,
• Press ENTER to display Screen 9_
9, Screen
*Foliow
Screen
9: Cable
the on-screen
10
10, Scr_n
i0:
Box
Preparation
instructions, and press
to display
Cable Box Code Testing
° When testing is done, _reen
11, Screen
ENTER
11: Cable
Box
11 displays automatically,
Tuned
* if you setect Yes, you see Screen
- If you se}ect No_ a different
to Channel
9?
12
code is tested
in Screen
10_
Note:
. Many
Cable
Boxes
require testing
more than one co,de
- If you seiect Test this code again, the same code is te_ed
in Screen 10,
again
Owner's
Manual
33
Installation
12. Screen
12: Do you have an antenna
elf you select
connectS?
Yes you see Screen 13
Note:
offyou selected No in Screen 3 then you must
select Yes in this screen to receive a channel
lineup and listing&
• ff you select
13. Screen
13: Are
°ff you select
"If you select
14, Screen
No, you see Screen
your
basic
Plasma
settings
Yes you see Screen 14
No, you see Screen 1,
i4: Congratulations
•Press ENTER to display _reen
34
33,
TV
15.
correct?
Installation
15. Screen
15: Helpful
information
•This screen tells you valuable information on _sing your Guide,
•Press ENTER to watch TV.
Notes:
, The TV Guide On Screen system receives program listings data through
receive regular program listings, please remember
to do the following:
1. Turn OFF your
TV when it is not in use. (Do nnt unplug
2. ff you have a Cable box eennected,
3. If you have more than one Cable
download.
If so prompted, please
the. power
}tour cable
or over4he-air
video signal
In order to
cord.)
leave the cable box On, but turn the TV Off.
system in your area, you may be prompted
fcfllow the on-screen
instraction&
, Program listings are uPdated several times a day. ft may take up to 24 hours
may take up to one week to receive all eight' days of TV program listings,
to select
to b_#_
which
Cable system's
program
to r_.ceive any TV program
Owner's
data to
listings.
Manual
It
35
Opera#bn
n
I
I0
1.
First, connect
_n standby
m_e
the POWER,
2.
power cord correcffy.
TV INPUT,
Se_e_ the ,viewing source
When
s_ndby
finished
the TV switches
to turn TV on, press the _)/hTVNIDEO
TV/VIDEO,
This TV is programmed
3,
At this moment,
OH (_),
by using TVIVIDEO,
to remember
using the TV
t V)
(O ~ g) button
TV INP_
which mo_
press the POWER
_,, CH (A
Number
to standby
button
mode.
button on the TV or press
on the remote
on the _mote
controt.
controt,
it was last set to, even if you turn the TV off.
button
on the remote
control
The TV reverts to
mode,
Notes:
* ff you intend to be away on vacation, disconnect
the power plug from the walt _wer
outlet,
. After turning _n the TV, # will take up to a week for the TV Guide On Screen system to receive furl
listings data
. Illuminates
orange in standby mode, When the TV is turn_
on, the indicator wifl blink green for 3°4
seconds before the picture is seen,
o When the TV is turned On, the TV Guide On Screen system is automaticatty
displayed,
The screen
may _ elightly delayed ff the TV was unplugged and then powered On.
36
Plasma
TV
Operation
H 0 M E Me n u
-
This menu is a contents guide.
In I'IO_
Menu, you enter the recor_d
Guide,Schedule
of the TV Guide,
list of DVR, pho_
IEEE1394
oeoo_
Recorded
TV
list and music
list of DVR or Memory
Card,
TV
or TV Menu.
oeoo_Ju_
Photo
_t
Music
_t
TV Guide
o
o
o
u
t
_OQeO_OQ
TV Menu
IEEE 1394
_hedule
Owner's
Manual
37
Operation
TV
-
The menus can _
1,, Press the MENU
shown
button
2. Press the i_ button
on the screen
and then use A/V
in the selected
language.
button to select
and then use & / V bL_on
First selest
the OPTION
38
Press EXIT button to return to TV viewing
previous menu
Plasma
TV
menu
to semect Language,
3,, Press the _ button and then use & / V button to select your desired
From this point on, the on-screen
menus wil_ be shown in the selected
4
your l;anguage.
or press MENU
Fanguage
Janguage.
button to return to the
Operation
- Automatically
finds all channels available through antenna or cable inputs, and stores them
- Run EZ Scan again after any Antenn_Cable
connection
changes
o A password
is required to gain access to _ Scan _nu
if the Lock System is turned on,
1 Press the MENU
2
button
Press the I_ button
and then
use A fV
and then use A/V
button to select
button to select
_
the _
is required
1_ Press the MENU
to gain access
button
2, Press the I_ button
and then
to Manual
use ,I,/_1,
and then use &/V
3. Press the I_ button
CA DTV.
Scan
button
and CABLE.
to select
the _
Memttal
to select
TV, DTV, CATV,
and
4. Press the i_ button and then
want to add or delete
use A / V button
to select
channel
you
button to add or _lete
& Press EXIT button to return to TV viewing
previous menu,
for the channel
or press MENU
on,
_.
use A / V button
ENTER
is turned
menu,
and then
5. Press the
list
menu.
menu if the Lock System
button to select
the channel
Seem,
3. Press the ENTER button to begin the channel search.
Allow EZ _n
to comptete the channel search cycle for ANTENNA,
A password
in memor:/on
number
number.
button
to return to the
Notes:
This channel
number
is a physical
channel
number,
which is different
from the normal
channel
number
shown
in Channel
Edit,
. When
a cable
nela(CATV
. When in.fling
.
TV: ar_log
DTV;
box
or CADTV)
connects
to the physical
will not be scanned
the CabteCARD
antenna(over-the-air)
digital antenna(over-the-air)
CATV:
CADTV:
analog
digital
cable
TM,
CATV,
channel
by EZ Scan
CADTV
2,3 or 4 in the 77/Guide
or Manual
is not working
On Screen
system
Setup,
cable
chan-
Scan.
in Manual
Scan.
TV signal
TV signal
TV signal
cable TV signal
Owner's
Manual
39
Operation
Create two different types of channel lists in memory: "Custom lisf' and
Favorite
channel list" from the default channel list created from the EZ S_n
channel search.
A custom _ist can be created by toggling each channe_ on or off with ENTER
button. The. The channels in the Custom Us_ are displayed in black color, and
the channels deleted from the Custom List are displayed in gray color. Once a
channe_ is highlighted you can add or delete the channe_ by referring to the
smaJl window at the top4eft corner of the screen.You
can create your own
Favorite List Use the FAY button on the rerr_te contrel when a channeJ is
higHighted
List
and then
1, Press the MENU
button
2, Press the !_ button
3. Press thelP
a preview
you can add or deJete the channel
button.
and then
use A JV
and then use ,& tT
to/_rom the Favorite
button to select
button to sel_
You will now see a screen filled
the $1_'l%rPmenu,
Chart_h!!
with channel
I_lit_
numbers
and
picture.
4. Use A _I, _II/1_ button to seled a channel and then use the ENTER bu4ton to
add or delete it. Press FAV button to add the channel to the Favorite List.
5
Press EXiT button
previous menu
to return to TV viewing
or press
MENU
button to return to the
Nefe;
• When a cable
CADTV)
-
box connects
will not _
editable
to the physical
by Channel
2
3, or 4 in 7"¢ Guide
use the cable box's
On Screen
Channel
Setup,
cable
Edit ff available
Shows DTV signa_ _eve_s which are received to your TV whether you need to adjust your antenna or digital
cable input. The higher the signa_ strength, the less likely you are to experience picture degradafJon.
DTV Signal: Only when the input signal is DTV or CADTV, this fun_ion
is available.
1_ Press the MENU
button
and then
use A tV
2. Press the !_ button
and then use &/V
3 View the on-screen
signal
4_ Press
40
channel
EdiL Instead
EX_
Plasma
TV
button to return
strength
bt,_on
to select
b_.rtton to select
monitor
to TV viewing
the _l)lP
menu.
D*X'V _al.
to see the quatity
or press MENU
of the signaJ being received.
button
to return to the previous
menu_
chan_ls(CATV
or
Operation
Choose preset labels for your channel&
ff a channel labe_ is provided on the signal from the broadcasting
even if you didn't preset a _a_ for the channel
1. Press the MENU
button
2_ Press the I_ button
3. Press the I_ button.
4. Use the CH (A_)
and then
use A _V
button
"You will now see a screen
button
5. Use A / V / 411_I_ button
the selected channel
ENTER
to select
to select
Changes the picture source so you can watch
other devices that are connected
to your TV.
3
button
Press the I_ button
and then
4. Press EXIT button to return
the previous menu.
1, Press the MENU
button
2. Press the i1_ button
for the channel,
to sel_
button to select
use & i V button
to select
Component2,
to TV viewing
or pre_
use & JV
button
viewing
or press
E_ER
button
to set the Label
to
TV, VCR,
DVD, or any
the _TIJ1P menu.
the source
Antenna_
RGS-DTV
(or RGB-
MENU
button
to return to
to sele,ct the SETII_ menu,
and then use & JV button to sete_
to _
then press
iMk_n lnl_.zt.
l_putf_a_el.
3. Press thelP- button and then use ,i, iV button to select the source:
Video Component1,
Compenent2_
RGB, HDMtt!DVt
or HDM_2
4, Press EXIT button to return
the previous menu.
screen.
banner..__.
Companentl
and then
and a preview
your off-air TV, _ble
and then use & _V button
Cable, Video, Front Videe,
PC), HDMII/DVt,
HDMt2
la_l
you will see the channel
and then use A/V
menu.
Label.
filled with _b,els
the appropriate
-
button
the _
Ch_l
a short name for a channel
to Label
if you press
1. Press the MENU
button
a channel
-
2. Press thel_
to sele_
and then use & _V button to select
station_ the TV displays
MENU
button
Video_ Front
to return to
Owner's
Manual
4t
Operation
Picture adjusts the TV for the best picture appearance.
program category.
When ad)usting Video menu options (contrast_ brightness,
Picture autom_icat_y
changes to Custom_
- Daylight
Norm_
Night T_e
Movie_ Video _me_
the facto_ and are not adjustable.
Select
color,
the preset
sharpness,
and Spo_
va_ue in the EZ Picture
tint, and color temperature)
settings
are preset
for optimum
1. Press the EZ PIC button repeatedly to select the picture appearance
s_etup option as shown below:
Custom
(your own settings)_
Dayiight,
Normal,
Night Time,
Movie,
Video
G_e,
and Sports.
• You can a_so use the VIDEO
2. Press the EXIT button
Adjust
the picture
_
Pi_lute.
to save and return to TV viewing..
appearance
1. Press the MENU
menu to adju_
button
to suit your preference
and then
use A/_
button
and viewing
2_ Press thel_ button and the_ use & _ button to select the desired
(ContrasL
Bt_.ghtne__s, Color, Shm_ne_
or Tint )_
3. Press the I_ button
4
Press EXIT button
previous menu
and then use _1 _ !_ button
to return
to TV viewing
situation&
to setect the VIDEO
to make
appropriate
or press MENU
menu
picture
option
adjust_ments_
button to return to the
Choose one of three autom,_fJc cotor adjustments.
Set to warm to enhance hotter
co_ors such as red, or setto c_l to see less intense colors with more b_ue.
1, Press the MENU
button
2. Press the I_ button
and then
use _/_
and then use _/_
button
button
to select
to seiect
the VIDEO
4. Press EXIT button
previous menu
-
Use to quickly
vatues.
to return to FV viewing
reset a_ the Video
1_ Press the MENU
button
2_ Press the I_ button
and then
or press MENU
menu options
use _/_
and then use _ ; _ button
42
Plasma
TV
to return to TV viewing
or
button to return to the
to select
to select
3. Press the I_ button to reset the Video menu options
4_ Press EXIT button
previous menu
Medium
to their origina_ factory
button
menu,
Color TemPere_t_u_e.
3. Pre_ the I_ bLrtton and then use _ ,__ button to selec_ either Cool,
Warm,
Vl(_o
the V_
preset
menu.
Reset
to origina_ values
or press MENU
button
menu based
to return to the
on the
manually,
picture qualHet a_
Operation
- Other
casting
_anguages
1. Press the MENU
2
may be available
ff a dig_at signal
is provided
by the broad-
station.
button and then use _,/V
button to select the AUDIO
Press the Ib button
and then use A/V
b_en
to select
& Press the I_ button
French,
and then use A/V
button
to select:
4. Press EXIT button to return to TV viewing
';.he previous menu,
or press
Audio
_e,
English,
MENU
menu
Spanish,
button
or
to return to
Scans for changes
in sound Jevet during commerciais,
then adjusts the
sound to m_ch the specified audio level SoundRite
makes sure that the vole
ume 1eve[ remains consistent whether you are watching a commerciaJ or a
regular TV program.
1. Press the MENU
button
and then use A/V
button
2. Press the I_ button
and then use &/V
3. Press the i_ button
and then use A / V button
button
4. Press EXIT button to return to TV viewing
the previous menu.
to select the &b_O
to setect _S4_,tn_te.
to select
On or Off,
or press MENU
EZ _und
lets you enjoy the best sound without
options based on the program content,
menu
any special
button
to return to
adjustment
because
the TV sets the appropriate
sound
When adjusting sound options (treble, bass, and front surround) manuaJmy, EZ Sound automatically
switches Custom.
Normal
Stadium,
News_ Music_ and Thief
are preset for good sound quality atthe factory and are not
ad_ustabJe.
1. Press the F7 SOUND button repe_ed[y
to select the appropriate
Custom
(your own setting),
Normal,
Stadium,
News,
Music,
• You can atso adjust EZ Sound
in the AUDIO menu
2. Press
sound setup
and Theater.
as shown
below:
EXIT button to save and return to TV viewing.
Owner's
Manual
43
Operadon
ii i_i
- Adjust
the sound
1. Press the MENU
to suit your taste and room
situation&
button
button to select the _DIO
and then use A/V
2_ Press the I_ button and then use A _V button to select
(_,
Treble, or _).
the desired
3. Press the i_ button
and then use 41/1_ button to make appropriate
4. Press EXIT button
the previous rr_nu.
to return
-
is a tradema_
o TruSurround
-
under license
1, Press the MENU
button
is incorporated
from Do,by
System
and then
or i&lgtS
(Sound
* 3:1B:llt_hoSoumd
under
sound option
to return
to
button to select
System)
from
"Dolby"
SRS Labs, Inc
and the doub[e-D
_ront
menu,
StL"rou_,
to setest Off, .3D E_I_c-Sout_I
TruSu_ound
_,
System
Creates a stunning simulated stereo effects from any mono sound and a
rea{istic three-dimensionai
sound with a very wide and deep sound stage
into stereo sound
, _
_uttound
Takes advantage of any multi=channel format without needing to add extra
speakers or equipment.
Dialog clarity, bass enrichment,
and the addition of
stereo audio enhance_nt
that produces an immersive sound experience
from standard stereo material
4, Press EXIT button to return to TV viewing
the previous rr_nu,
44
Plasma
TV
_
adjustments.
button
button to select the AUDIO
use .i, ,_!' button
Retrieva_
license
Laboratories.
a_d then use A/V
2, Press the I_ button and then use A/V
3. Press the I_ button
or press MENU
menu.
of SRS Labs, {no.
XT technology
Manufactured
to TV viewing
_ ii_i!__iii_iii_iii_iii_iii_iii_iii_ill
__ i
or press
MENU
button
to return
to
symbo_ are trademarks
of Doiby
Laboratories.
Operation
Turn TV speakers
TV Speakers
1. Press
off ff using external
option
the MENU
audio equip_nt,
Feature
turns the
On or Off,
button
and then
u_
A
V
button
to selec_ the AUDIO
menu
2 Press the I_ button
and then use A _V button
to setect Tit Speaket_
3, Press the I_ button
and then use A
to selec_ _
V button
4, Press EXIT button to return to TV viewing
the previous menu,
or _
or press MENU
button
to return to
- This TV c_n receive MTS stereo programs and any SAP (Secondary
Audio Program) that accompanies
the station transmits
an addition_J sound signa] as well as the odginal one,
- When having seJected Stereo or SAP button on the remote control this TV can on_y receive the signal
the stereo
program;
if
when the TV station
transmits the proper signaEs.
Mono sound is automatically
received if the broadcast is only in Mono; even though Stereo or SAP has been selected
Select Mono if you want to Uisten to the rr#no sound in remote areas during stereo/SAP
broadcasting,
Stereo
or SAP can be received
in Analog
1. Use the SAP button to sele_ your desired
Stereo_ or _P
appear in turn_
• ff other
2
Press
languages
EX_
available
on the digital
channel
MTS mode
signal,
select
in analog
_ch
time you press
the SAP button,
Mono,
them with the SAP b_ton.
button to save and return to TV viewing,
88E High Definition Sound
and musica_ realism,
1, Press the MENU
button
restores
clarity
and then use A iV
and presence
button
for better speech
to select the AUDIO
2, Press the I_ button
and then use A / V button
to setect BBE
3, Press the I_ button
and then use A JV button
to select
4
signal
Press EXIT button to return to TV viewing
the previous menu.
Manufactur_
under
license
from
or press
BBE Sound,
intelligibility
menu,
On or _,
ENTER
button
to return
to
Inc.
Owner's
Manual
45
Operation
o The time is set automatically
from a digit_ channel signal
- The digital channeE signal includes it_formation for the current
-
1. Press the MENU
menu
2
time provided
by the broa_astmg
station,
Set the dock manually, if the current time is set incorrectly
by the auto clock function,
When you set up the TV Guide On Screen system Au'_ Clock menu is not selected,
button
Press the I_ button
_d
then
use A _V
button
to select
the TEE
and then use & _!' button
to select
AutoCIo_
3, Press the I_ button
and then use A IV
button
to select
On
4, Press the I_ button
time zone: ]lt,,astem,
and then use A iY
Central,
Mountain,
button to select your viewing area
Pacific, Alaska,
or Hawaii.
5. Press EXIT button to return
the previous _nu.
to TV viewing
* If current time setting is wrong,
- When you set up the TV Gui_
not selected,
1 Press the MENU
button
2, Press the I_ button
or press
MENU
button
reset the clock manually.
On Screen system, MunualClock
and then
use A _V
and then use A IY
button
button
to select
to select
to return to
menu is
the TEE
_ual
menu
Clock
3, Press the i_ button and then use .<1/ I_ button to setect either the year, date,
or time option, Once se_ected, use the & _V button to set the year, date, and
ti_
options,
4, Press EXIT button to return
the previous
to TV viewing
or press
MENU
button
to return to
menu,
- Timer function operates onty if current _me has been seL
o Off-Tim_r function overrides On-_rr_r
function if they are set both set to the same tim, e,
The TV must be in _andby
mode for the On-Timer to work_
- ff you do not press any button within 2 hours after the TV turns on with the On Timer function,
standby mode.
1. Press the MENU
button
2. Press the I_ button
_d
then
use A JV
button
to select
the TEE
and then use & / Y button to setect Off _er
3. Press the I_ button and then use & ,_V button
" To cancel Ol_O_t tL__er function, select Off.
to select On.
4. Press the I_ button
and then use & ,_
to set the hour.
5. Press the 1_ button
and then use _ _V button
6. For only On timer
Press the I_ button
Press the I_ button
on,
Plasma
TV
or On TL_r.
to set the minutes,
f_nction
and then use A/_
and then
7. Press EXIT button to return
the previous rr_nu,
46
button
menu.
button
to select
the channe_ at torn-on,
use & / V btrtton to set the sound
to TV viewing
or press
MENU
button
level a_ turn-
to return to
the TV will autom_ica_ly
revert to
Operation
The Sleep _rr_r _ms the -Pv' off at the preset time
You can aiso set up the Sleep 'trainer in the 'rl_
1_ Press the _MER
followed
button
repeatedly
by the foilowing
to seU_
sleep timer options:
Note that this set_ng is cleared
menu
the number
minutes before the TV _ms
4. To cance_ the S_ep "Timer, press the TIMER
if set to on and there
minutes.
1, Press the MENU
is no input signal,
button
b_n
on the screen_ press
off, press the T|MER
repeatedly
the TV turns
appears
on the screen,
and then use k sV button
to select
then use A / V button to se[ec_ Auto
& Press the I_ button _
then use A / V bt_tton to se[_
the ENTER
button., The timer begins
to
button once.
to select O_.
off automatically
2. Press the I_ button a_
4, Press EXI[T button to return to T'v' viewing
the previous menu,
Firet the O_ op_on
10, 20_ 30_ 60_ 90, 120_ 180_ and 240 minutes
2, When the number of minutes you want is displayed
count _wr_ from the number of minutes selected,
3. To check the rem_ning
of minutes
when the TV is turned off,
after 10
the IL'_E
menu
O_.
On or Off.
or press MENU
button
to return
to
Owner's
Manual
47
Operation
Be
Page 73-.74 for TJmeShA
functions.
o Set up the TV for the best picture appearance
1. Press the MENU
button
2. Press the II_ button
and then use A ,_V b_on
and then use A _V button
3. Press the I_ b_ton
_
4_ Press the Ii_ bb_on
at_ then use & / V bt_on
5, Press
to return
Note:
EX_
burn
This feature
= Low power
1, Press the MENU
movies.
to select
to select
the OPTION
to TV viewing
button
to _Eect On or Off,
or press MENU
button
to return to the previous
disptay
power
and then use A/Y
consumption,
button to select
the OPTION
2, Press the 11_button
and then use A ;V button
to select
_:_'_
3. Press the I_ button
and then #se A / V button
to select
Low powe_
and then use A/V
to select On or Off.
° When
5
48
Press
you select
EX_
Plasma
TV
button
menu
only in 480i mode.
the plasma
4_ Press the I_ button
menu.
_
then use A ,'Y button to s_lec_ C',t, en_:x 3_Mode,
operates
r_uces
for viewing
On, the screen
to return
button
menu,
darkens,
to TV viewing
or press MENU
button
to return to the previous
menu
Operation
- This function
is onEy applied
1. Press the MENU
button
to _PY2DRi60PY2DRH
and then
use & _ V button
mo_L
to select
2. Press the i1_ button
and then use A /V
3. Press the I_ button
and then use & / V button
to select
4
and then use & / V button
to select On or 0ti,
Press the II_ button
- When you select
5. Press
button to select
the O_ION'
menu.
J_lve_t_ed.
f-Gi logo.
On, the _ight for the Logo is on_
EXIT button to return to TV viewing
or press
MENU
button
to return to the previous
menu.
Owner's
Manual
49
Operation
1. Press the MENU
menu.
2. Press the I_ _n
button
_d
and then
use A / V
button
to select
the ONION
then use A IV buttonto se[e_ C_lion,
3. Press the I_ buttonand then use A iV buttonto selectOn or Off,
4. Press EXIT button to return to TV viewing
the previous menu.
Analog Broadcasting
or press MENU
button
to t_etum to
System Captions
-
Select a caption mode for displaying captioning
information
if provided on a program.
Analog caption displays information
at any position on the screen usually the program's diary.
° Text displays information,
usually at the bottom position and is used for a data service_ generally
not program
related.
- Caption/Text,
if provided by the broadcaster,
would be available for both digital and analog channels on the AntennaJCable
- This T¢ is programmed
to memorize the caption/text
mode which was la_ set to, when you turn the power off,
1. Use the CC button repeatedly to sel_
Caption CCI, C_,
• _ Mute shows the seiected captions option (if available
2, Press _X_ button to save and return to TV viewing
. You can a_so use the ONION
1. Press the MENU
menu.
button
2. Press the i_ bLr_on _d
menu to select
and then
use & /V
CC3, CC4
on program)
Textl, Text2_ Text3,
or Text4.
when the TV sound is muted
Caption/Text.
button
then use A / V button to _[ect
3. Press the i_ bu_ton and then use & t Y bu_ton to se[e_
CC4_ Textl,
Text2_ Text3, or Text4.
to select
the OP_ON
_pUon/Text.
caption:
CC1, CC2,
CC3,
* CAPTION
The term for the worde that scroll across
ally the audio
the bottom
portion of the program provided
of the TV screen;
for the hearing
usu-
impaired.
* TEXT
The term for the words that appear
the entire screen;
usually
4. Press EXIT button to return
the previous menu.
messages
in a large black fra_
provided
to TV viewing
and almost
cover
by the broadcaster.
or press
MENU
button
to return
to
Owner's
Manual
5I
Operation
Digital Broadcasting System Captions
-
Choose the language you want the DTV!CADTV
Captions to appear in.
L_guages
can be chosen for digit_31sources onty if they are inctuded on the progr_.
1. Press the MENU
menu,
button
and then
use & sV
button
2. Press the I_ button ar_ then use A _V button to se[e_
to select
the OPTION
Cap,on/Text
3, Press the _ button and then use A ; Y button to select available
guages: English,
$_nish_
or French
4, Press EXIT button to return to -IV viewing
the previous menu
-
Customize
the DTViCADTV
1, Press the MENU
menu.
button
2. Press the I_ but_n
captions
or press MENU
that appear
caption
_an o
button to return to
on your screen
and then use A / V button
to select
and then use & / V button to select Caption
the OPTION
_n.
3, Press the I_ button and then use 411/i1_ button to select Custom.
4 Use ,Ik / V button to customize the St,_4e, Font_ etc,_ to your preference, A preview k_n is provi_d
at the bottom of the _creen use _ to see the caption [_°
guage
_:
Set the size the words will appear in.
, Font: Set_t a typeface for the words.
* Text Color: Choose a color for the text
* Text Opacity
- Bg (Backg_nd)
Specify the opacity for the text colon
Color: SeIest a background
color.
. Bg (_kground)Opacity:
Select the opacity
Edge _:
Select an edge type,
* _ge
Color:
Select
Plasma
TV
cotor,
a color for the edges.
5. Press EXIT button to return
to the previous menu.
52
for the background
to TV viewing
or press
MENU
button
to return
Operation
- A frozen _il_ picture from a PC/video game
image ; even though the image is changed.
1. Press
the MENU
button
and then
displayed on the screen
Use our unique method
use A / V
button
to select
for prolonged
periods
to minimize any fixed
the
will resuff in a ghost
image on the screen.
OP_ON
menu,
2 Press the I_ button
and then use & / V button
3
and then use A iV button to select either Normal_
Press the I_ button
wash
to seiect
_M
Mett'_x1L
White
or Inversion.
Orbiter
, Na_'m(d
If image sticking
• White wash
is never a problem,
_SM is not necessary
_ set to Normal
White Wash re_ves
permanent
images from the screen.
Note: An excessive permanent
image may be impossible to clear entirely
White Wash. To return to normal viewing, pre&_ the any button.
• Orbiter
Orbiter
may help prevent
ghost images
However,
with
it is best not to allow any
fixed image to remain on the screen. To avoid a permanent
image on the
screen, the image wi_ move once per minute: Left _o._Right _o._Upsi_
_o._
Downside
• Inversion
In_ersion
minutes.
4. Press
_
Right _._._._
Left _
will autorr_ticalIy
Downsi_
-_ Upside.
invert the plasma
EXIT button to retem to TV viewing
the previous
panel co,or every 30,
or press MENU
when the set is turned
is onty available
1, Press the MENU
menu_
to return to
bufton
in rr#_is
and then
on. The LED disptays
50/60PY2DR,
use A ./V
and then use A/V
button
button to sete_
to select
button
3. Press thel_
button and then use ,L ,'V button to setect _,
Press EX_ button to ream
the previous menu,
to TV viewing
or press
current
TV
50/60PY2DRH.
2_ Press thel_
4
button
menu.
IHuminates brightly
statu&
This fun_on
display
Front
MENU
the OPTION
Display,
Dark
button
and _.ght,
to return to
Owner's
Manual
Operation
Displays
1 Press
the siide show to explain
the MENU
button
and then
the main features
use & _V
of this TV.
button
to select
the o_rtroN
menu
2, Press
the I_ button
and then use & / V button
to select
AutoDemo
3, Press EXIT button to stop Auto Demo.
Note
54
: The stooges on the Auto Demo
Plasma
TV
may differ from
the actual products,
Operation
I_IZIII
ii
Parental
Contro_ can be used to block specific
channels,
ratings and other viewing
sources.
The Parenta_ Control Function (V-Chip) is used to b_ock program viewing based on the ratings sent by the broadcasting
station,
The defauff setting is to allow all programs to be viewed Viewing can be blocked by choosing the type of the program and the categsries, It is aJso poseible to block all program viewing for a time period, To use this fundion,
the following must be done :
1, Set ratings and categories to be block_,
2_ Specify a password
3, Enable the bck
V-Chip rating and categories
Rating guidelines
are provided by broadcasting
stations. Most television programs
Rating and/or individual Categories.
Movies that have been shown at the theaters
System (MPAA) on_y.
Ratings
for Movies
Movie Ratings
• Blocking Off
.G
• PG
• PG-13
.R
• NCq7
.X
tf you set PG-13
previously
shown
in theaters:
:
(Permks
aH progr_s)
(GeneraJ audience)
(Parentam guidance suggosted)
(Parents strongly cautioned)
(Restricted)
(No one 17 and under admitted)
(Aduff only)
: G and PG movies will be available,
PG13,
Ratings for Television programs including
•
.
•
•
•
•
and television movies can be blocked by TV
or direct-to-video
_vies
use the Movie Rating
TV-G
TV-PG
TV-14
TV-MA
TV-Y
TV-Y7
and X wil_ be Mocked.
movies :
(GeneraJ audience)
(Parental gaidance suggosted)
(Parents strongly cautioned)
(Mature audience only)
(All children}
(Children 7 years olde0
"p,t Rating Children:
• Age
• Fantasy Violence
TV Rating General:
•Age
• DiaJogae - sexual dialogue
• Language
_ adult language
• Sex o sexual situations
• Violence
Input gl_k
• Video, Front Video
• Component
1, 2
• RGB HDMI1iDVI,HDMt2
made-for-TV
R, N0-17
(applies
(applies
to TV-Y, TV-Y7)
to TV-Y7)
(applies
(applies
(applies
(applies
(applies
to
b
to
to
to
TV-G_ TV-PG, TV-14, TV-MA)
TV-PG, _¢-14)
TV-PG, TW14, TV_MA)
TV-PG, TV-14, TV-MA)
TVoPG, TV_14_ TVoMA)
(On_ Off)
(On, Off)
(On_ Off)
Owner's
Manual
55
Operation
-
Set up blocking schemes to bJock specific channels,
A password
is required to gain access to this menu.
1, Press the MENU
Then,
button and then use A / V button
ratings,
to select
and extern_
the T-O_
menu_
press the i_ buttJon
• Enter the password
as requested.
• The TV is set up with the initial password
"0©-0-0".
2. Use the A / V button to choose from the following Lock Menu options.
option is selected, change the se_n_
to your preference.
• Lock
viewing
System:
ously.
• Set Password:
Enables
Change
• B|eek Channel:
B_ocks
that you do not want your
• Movie Rating (MPAA):
its specified, so children
or disables
the b{ocking
the password
scheme
by inputting
Once the
you set up previ-
a new passer, oral twice.
any channels that you do not want to w_ch or
chiJdren to watch.
Blocks movies acoording to the movie ratings _im_
cannot view certain movies, You cen set the rat-
ings _imit by b_ocking out aH the movies with the ratings above a specifi_
level Keep in mind that the movie ratin_
limit only app;ies to movies
shown on TV, not TV programs, such _ soap operas.
• TV Rating_hi|dren:
Prevents children from watching certain children s TV
programs, according to the ratings timit set The chiJdren rating does not
apply to other TV programs
Un_e_ you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can
view those programs.
• TV Rating-General:
_sed
on the ratings,
bEocks ce_in
you and your family do not want to view.
• Inp_
Bl_k:
Enabtes you to select a source
source devices you have hooked up
3, Press EXIT btJtton to return to TV viewing
the previous menu
Note:
, ffyou ever forge_ your pa_word,
56
Plasma
TV
TV programs
that
to bFock from the external
or press MENU
button to return to
key in 71, "7'i '7' '7" on the remote control.
sources.
Operation
i_iiiiii
ii
* In this manual, the OSD (On Sct_n
the TV o_ration,
Display)
may be different
from your TV's because
button
2. Press the I_ button
and then
and then u_
use & zV
&,/V
button
button
to seIe_
to _ect
the CABLE
your desired
to help
tn case of Scientific Atlanta CabIeCARD
- The Cable sub menu displays when inserting the CabLeCARD _* to the TV.
- The CableCARD
_ type is Motorota, _ientJfic
Atlanta (SA) or SCM etc. The
OSD (On screen display) is different from your TV according to your
CabIeCARD
_ type
1. Press the MENU
it is just example
TM
menu.
item,
3. Press the I_ button.
4
Press
EXIT button to return to TV viewing,
ie)
CaMeCARD_/Host
_D Screen
-
As shown, the pairing
humor
means your TV
and Cab[eCARD
_ _D.
For fu _er information
regarding cabJe TV service, contact your leca_
cable TV service
provider(s)
insert the CableCARD
'_, If you, it _kes about I minute to exchange the data
between the TV and the CabteCARD _' Then, TV screen displays as shown to
-
the right
Let your cable TV service
provi@r
know the CableCARD
_ [D and Host [D.
o if your cable TV service provider is a registered the CabIeCARD
ID, you can watch premium or high value channel
-
if you ever registered
with the cable TV se_ce
mium or high va_ue channel wffhout a message.
-
provider,
'_' tD and Host
you can watch pre-
if the certificates
don't n'_tch
the OSD (On screen display)
between
dispJays
the qF'7and the Cab[eCARD
as shown Left.
_,
Owner's
Manual
,57
Operation
1,
3,
4,
1. If you e_er the ChannelE_Jt
picture 3 a_ve,
after running the EZ Scan w_hout
2. [nseA the CableCARD
'_'.Then,
2~3 minutes to gather the _ble
than that time)
If an emergency
situation
_curs
cable TV service provider(s)
When receiving an emergency
Plasma
TV
_, you can see the cable channe_ list as the
the TV receive a new c_[e channel list which is usua{[y one part channel
It takes
channel _ist a_er inserting the CabJeCARD " as the picture 4 above,, (Occasionally
during
message,
watching
the TV/DTV/CATV!CADTV,
the _ssage
is changed automatically
to a channel that maintains
pear after some tim_ and return to the last channel
58
Cab[eCARD
is displayed
the e_rgency
you can receive
on the screen as shown
message
The message
a message
from
below or the channel
a_ematica_ly
disap-
about
more
Operation
- When
you press the
- Or pressing
1. Select
button,
the REC LIST button,
the _rded
HOME
menu is displayed.
you can directly
1P,t in HOME menu or press the IREC LIST
A,
here, you can view the recorded
button
program
list.
list.
to view the recording
list as shown
be_ow,
B_
3, Select a desired
• Create:
From
enter the recording
Create
folder in the fo_der list and then
press the ENTER
button
to view
the detailed
menu.
new fo_der.
• Delete:
Delete folder (except 'My TV').
• Rename:
Edff fo_der name (except 'My TV').
• Cemcel: C_ose the detai{ed menu.
•....................................
C_
_> Use theA/V
_11/1_
and
ENTER button to edit folder
name,
°> And then move to the OK
and press the ENTER button
I
I
to _ve.
Owner's
Manual
59
Operation
U_
- The thumbnail
recor_d
1. Use the CH A/'V
2. Use the MARK
marked.
3, Use & iV
menu_
tist is shown
button
button
a_ve,
for page up/down
navigation.
to add or delete from
_,_il ;1_ button to navigate
the mark _ist. A _
the appropriate
thumbnail
is disprayed
next to the thumbnail
photo, then press the EI'_ER
photo if an item is
button to open the _p-up
- _:
Begin playback of selected recording,
- Mark All: mark all photos on the screen,
. Unmatk
AIB." Change marked photos to unmarked
photos.
-Move:
Move pr_ram
saved in HDD to other folders
- Through
the 1394, recorded
program
can be copied to a DVHS device.
When a device is not connected
to the
1394 port, "NO DVHS Connected"
displayed
on the screen
- _lete:
Delete the selected recording.
-DVI_I_ _t:
When DVHS is connected_
- Rename:
Edit recorded program title,
. Cemcel:
C_ose the Pop-up menu.
4. Repeatedly
press
selected
program
EXIT button to return to TV viewing
is saved to the DVHS,
or press
button
- tf the HDD has a proMem on performing
a function (Recording,
DVR, seiec_ Yes or No to in_ialize HDD as shown below,
- If you select
(Recording,
you selects
playback,
ff temperature
below.
60
Plasma
TV
is below zero(0_),
this message
is
Yes,
to return
Photo,
the Recorded
to the HO_
Music)
related
menu_
with
List
Photo, Music) wil_ be deleted. Even ff
No, it can't be worked DVR operation of
record etc.
is displayed
to initialize
HDD
as shown
Operation
-
You can play the selected
1.Play a recorded
program
in the recorded
program
list
program.
2.While playing, You can see a diversified
playback screen as shown _{ow:
* At first, an icon showing current p_ayback mode is disp{ayed as mar_Jng _
display the progress bar.
. To rerr_ve a recorded programs icon, press the EXIT button.
3
.Then
press the EN3"ER button
to
4
I
I
1
6
_*
_
1. Indicates movement of recorded program.
2. Indicates status of recorded program.
3. Indicates elasped playback time.
4, Indicates total piay_k
The 'Progress
Bar'?
_
This function indicates a possibie_
DVR reshowing section ,a current on-screen and real om
broadcasting
position, a section
of section-recording,
J
time,
5, Indicates a quarter of program runtime,
6, Indicates current playback position.
Using
the remote
control
- You can shift playback to any point whi{e p_ayingthe recorded program
Owner's
Manual
6I
Operation
You can save the desired
1 At the point you wish
° The progress
screen
to start
in the recorded
_ press the
bar will show the edited
* _t can be _ssible
to search
the recorded
program
as red
while editing
the section.
Iii_i_ button,
step 1,2, it can be possible
4, If you press the (['_'_iii button
list after editing
button
section
(4._ or H_), and: pause
2 When you wish to stop, press the
• Stop editing the section
3, If you repeat from
I_
program
_ edit some
to stop the recorded
program
- Save:
programs
playback,
this message
Save contents of the edited
of the recorded program,
is displayed
section
Undo:
as shown
below.
and finish the playback
Don't save contents of the edited section
backer the recorded program,
• Cancel:
The screen returns to p_ayback,
and finish the p{ay
Notes:
* It can be possible
to play on the recording
/ reserved
recording
o It can be possible to hear a noise from the hard-disk during
the proficiency
and creditability
of product,
the noise occurred
playback
of the recorded program,
The noise is irrelevant
more than adequate is the same as good product
. When saving the content of the edified sectio#, de/ele the portion not selected.
o When power fails during editing; It can be possible for the program net to be editied.
ton after checking the recording tisL
. Editing the section can be possible to the maxium
o Edits must be more than 10 seconds to be saved,
62
Plasma
TV
of t0 files,
You do press
the STOP (m)
but-
- You
can set the section
and repeat the same
1_ At the point you wish to start,
- At start points,
it will appear
2, At the point of desired
"At finish
points,
• Repeatedly
as marking
will appear
_'_iI
Note;
_,
_i_)
It can be possible
button,
section,
of _ess than 5 seconds,
to move the position
* Return to the start point of marked
4. If you press the
program.
button
bar which is to be repeated
button
of the the recorded
as marking
ptay the marked
• The progress
_'
finish_ press the "_'_
• You can not make sections
3. Press the
press the
section
or i_i
to search
section
button
using
will be showed
in btue color,
of the start point,
and then start the playback.
to stop playing the repeat section.
(Row/FF),
Pause
to edit a section
while repeating
a section.
Owner's
Manual
63
Opera_n
What is Memory
Precaution
Card
for Using the Memory
Card
o Please be sure to insert the correct memory card type in the right direction.
(Confirm between the two memory slots before insertion.)
- Don't insert the metat substances
rote the slots of the memory card.
o Do not bend, drop or apply strong shock to memory card.
- After pulling the memory card out from the TV, please
t from static sh_k
- The stored data may be changed
keep the memory
or lost as a result of misuse
stick in a appropriate
case to prevent
static eIectricity,
o Do not turn the power off while the memory card is in operation,
- Don't eject the memory card while using it. Otherwise.
it may cause a data loss or card damage
- _nsert onFy one card to each slot
o To prevent a change
around the TV,
- This Company
or loss for stored data. don't misuse the TV or don't
takes no responsibility
the TV set, inapproeriate
product.
TV settings,
for problems
such as the damage
or any other reasons,
o Ensure to use a memory card that l_sts the manufacturers
- The manufacturer
ed
will not be responsible
- Make sure to comply with the following
- Each Memory
64
Plasma TV
Card is complied
or malfunction
except for defects
or electrical
noise
that ,occurs while using
or malfunctions
intrinsic
to the
name and serial number.
for any data damage,
Making
steps when ejecting a memory
with standard.
let static electricib!
back up data is strongly
card
recommend-
Operation
Entw M_
1.Using th_ rv_mory Cad / 2. Enter the HOME Menu
1.Using the M_ory
Card
A_
label-side
upward
•
Inserting
1. In_rt
a Card
the Memory
2. Two slots support
Card to Memory
defferent
card slots of the TV side panel
t_s
of the Memory
Cards.
3. if Merry
Card is not inserted, each dot is disabled.
•
a card
Ejecting
1. Pre_
2. _lect
the M/C EJECT
the Memory
button
Card
on the remote
I or Memory
control
Card
2 b_ed
on the inserted card tecatien
ff selecting
Cam=eel, rerr_ved
from
the screen.
3. Ejec_ the card with the hand.
Caution:
Press the M/C EJECT
removing the memory
age the card.
button
card.
of remote
control
before
F_Jure to do so may dam-
Owner's
Manual
65
Opera_n
Use the specified
9 types
Some
card based
of Memory
Mag[cS_or
on the slot location.
Card can _
used for this Plasma TV
Plus card is not comp[;ed
w_th the TV.
Slot 2
MMC
Memory card
CF (CompactFJash)
capacity
MD (Micredrive}
CF+I
SMC
: 4GB --1
: 4GB
(MagicStor):22GB
SD (Secure
SD
_
MS (Memory
CF Type I!11
_J
Card)
MS
Stick)
MS Pro (Memory
DigitaL) : 1GB
MMC (MultiMedia
xD
:128MB
St_ck Pro):
SMC (Smart
Media
Card)
xD (Kxtream
DigP_al Picture
: 1GB
Unsupported
damaged
or
file
Unsupported
errors.
file
66
Plasma
TV
capacity.
or
damaged
Do not try to change
types
to the
file extension
JPEG
or
the file
extension
MP3
of supported
flies
can
cause
of unsupported
file types_
1GB
: 128MB
An error may occur if you use a memory card with greater than the
specified
MS Pro
Card)
: 512MB
Operation
When
you plug the Memory
Card, this screen
is dispJayed
B.
Co
t. Press A/Y/_11
2, Press E_ER
Note:
a_omaticaHy,
_'1_ button to select either IF"_'_
button to move to _eto
_t/_¢
In 30 seconds
2.Enter
later,
message
the HOME
When you press the
it's available to playback
The total storage
'Loading"
or _c
on Memory
_
of the each slot
will dissapear
C_d
I or M_ty_2
(Directly movie to p_68 (C))
from the screen.
Menu
button, HOME menu is displayed
and copy the Photo file of Memory Card or HDD,
space of photo file is i0GB.
* In this manual, tim OSD (On Scr_n Display) may be different from your TV's because it is just an
example to help you with the TV operation,
t. In HOM£ menu, use A iV button
I_ button to select the Photo _t.
2,
and then
use the ENTER
or
A_
Use A/_'
button to seU_ the Z._BD/Mem_C_d
_
Memo_
_
2 and then you will see a screen filled with
thumbnail photos (pic C,D),
Owner's
Manual
67
Opera_n
Marked thumbnail photo humor
Current pageFTotal pages
t
L
Card type
Usable Card
memory
_
.....
-//
Usable
Folder
List
Direct
C_
3, Select
Buttons
D,
the desired
* Create:
Create
folder in the folder list and then press
the
ENTER
button
to view t_qe de_iled
new fotder,
o _lete:
Delete fol_r
(except 'My Photo" )
° Rename:
Edit folder name ...........................................
* Cancel:
Close the detailed menu,
E,
=> Use the &/V
,_11/1_ b_ons
and then ENTER button to
select the figures
*> After editing folder name,
seiect OK and press the
EI_ER
68
Plasma
TV
button
!o s_ve:
menu
Operation
As shown,
up to 15 thumbnaii
photos
are listed per page,
HDD mode
MemoryCard
1or 2
1. Use the CH A / V button to navigate in the thumbnaiJ
2. Use MARK button to mark or unrr_rk a photo. When
marked ones. If no photo is marked, you can view or
3. Use A / V / _11/ 1_ button to navigate the appropriate
menu
• View;
, Slide
photo page.
one or more photos are marked, you can view or sride show only the
smide show al_ photos in the fotder.
thumbnail photos, then press the ENTER button to show the PopUp
Display the selected _tem_
Change from stJl_ image to slide show by pressing the PLAY (1_.)button.
Show: Start a slide chow with aim photos in the fofder. The cJi_ show state can be changed to the view state by
pressing the PAUSE ([[) button. Before starting a slide show_ you can choose the s_ide show inte[va_ (3,6 or
9 seconds),
E M_k
All: Mark al{ photos on the _reen,
• Unm_k
All: Unmark all marked photos.
• Move: Only HDD mo_,
move the sefected photo of this folder to another
Delete:
This menu is only available in HDD mode.
_, Copy to M/C:
Copy the selected photo in the HDD to the Memory Card.
This menu is on{y appeared
in HDD,
.........................
folder.
_
COpy to HDD: Copy the selected photo in the Memory Card to the HDD, At this time, you can a[so make new folder This
menu is onry avai[ab[e in Morton,' Card mode And ptease keep copy of photo and music fi_es in other storage devise,
• C_cel:
4. Repeatedly,
Close the pop-up
press
EXIT b_on
menu,
to return to PC viewing
ot press
button
to return
to the HOME
menu.
Owner's
Manual
69
Operation
Purcha_d
MP3q'music
files may contain
copyright
restnctions.
menu
is displayed.
Playback
of these files may not be supported
m_eL
o When you press the
It's available
button,
KO_
to play and copy the Musicfile
The tofat storage
space
of music
of MemoR/Card
or HDD
rite is 1OGB.
* In this manual, the OSD (On Screen Display) may be d_fferent from your TV's because it is just an
example to help you with the "IV operation,
1. Use A/V
button
to select the _s|c
2.
_d
then use the ENTER
button
or I_ button
A.
_.
Use & iV button to select the _D/M_r¥C_11
Me-,-r_)r¢ Card 2 and then you will see a list of music titles
(pic.C,D)
Current
playing
time/Total
I'_rked
Current
pageFrotal
pages
Card type
\
Usable Card
memory
Folder
List
Direct Buttons
70
Plasma
TV
playing
time
music title number
by this
Operation
C,
U.
3. Setect the desired
fotder
in the folder
tist and then press the
* Creale:
Create
- Delete:
* Rename:
* C_cel:
Delete folder (except 'My Music')
Edit fo_der name ..........................................
Ctose the detailed menu,
ENTER
button to view
the detailed
menu.
new foJder.
E,
-> U_ the A/V
_1/i_
buttons
and then E_ER
button to
select the figures.
-> After editing folder n_e,
select OK and press the
I
ENTER: button
to save,
MemoryCard
1or2
NDD mode
- AS shown,
1, U_
up to 8 music titles
the CH A / V button
are listed per page.
to navigate
in the music
titles page
2, Use MARK button to mark or unmark a music flt_e When one or more music tit_es are marked, the marked music will
be p_ayed in sequen_
For example, if you want to _isten to only one music repeatedly
just mark the music only and
ptay it. ff no music title is marked, all the music in the folder will be played in sequence_
3 U_ A Y _'_1 _ I_ button to navigate the appropriate
music rifles, then press the ENTER button to show up the pop-up
menu.
Owner's
Manual
7t
Operation
*
.
,
F*
L.
*
Play'. Piay the selected musics.
Stop Play: Stop playback,
Play With Photo: Start playing the selected musics and then move to the Photo
Mark All: Mark all musics in the folder.
Unmark All: Unmark a][ marked musics.
Move: Move the selected musics of this fo_der to another folder.
* De|ete:
-* Copy
Delete the _lected
musics,
This menu is only available
to M!C: Copy the selected musics in the HDD to Mer_#ry
This menu is only avaifabEe in HDD mode,
........................................................................................
-. Copy to HDD: Copy the sel_ed
folder, This menu is only available
storage _vice.
* Cancel:
C_ose the pop-up
4, Repeatedly,
-
press
mode.
Card.
J_
musics in the Memory Card to the HDD. At this time, you can also make new
in Memory Card mode. And piease keep copy of photo and music files in other
menu.
EXIT button to return to TV viewing
If you don't press any button
as a screet_ saver.
in HDD
Ust.
for 40 seconds,
or press
the play information
button
to return
box (as shown
to the HOk_
in the below)
will float
Notes:
. When music
is playing,
_
is display_
in front of the music
title
. tfyou press any button except VOL ,A / It, MUTE. _, It, III _
_
buttons, screen
. The I_, It, m, i_l_, t_
buttons on the remote control are also available h_ this mode,
72
Plasma
TV
_ver
is stopped,
menu,
Operation
- This function allows the unit to automatically
record live TV and make it available for reviewing at any time,
Wkh Auto Buffering turned on you may pause and rewind no_'mal TV viewing at any time without missing
any of the live broadcast
1 Press the MENU
button
and
then use A/_11' button to select
the OPTION
2, Press the i_ button
and then use A _V button
to select
_
3. Press the Ii_ button
and then use ,L/V
to select
the _
button
menu,
Mod, e.
4. Press the I_ button and then use & ; V button to select On or
1. After selecting
the TL_c_eS_JJtMode
• As soon as Timeshiff
the screen. ( Timeshift
On, press the E_ER
button..
starts, a progress bar indicating current
'Progress
Bar' is shown betow)
. Press the EXIT button to hide the 'Progress
• Stay The TimeShift
even change a channel
1
Bar'. Pressing
on Timeshift.
recording
the ENTER
status is displayed
button
will display
in the bottom
the 'Progress
of
BarL
3
1, indicates
status
2, Indicates
current
o1[current
3. indicates
i5 minute
4. Indicates
Timeshift
5, indicates
current
displayed
video,
save time,
intervals
elasped
Tlmeshifl
tram
Tl_shtft
start time. (Total - one hour).
time.
position,
Owner's
Manual
73
Opera#on
2 When
finishing
the Timeshift function
enter the Menu and then __
is to be Off
Notes;
, DVR (Ds_qilal Video Recorder)
in TV or SET TOP BOX,
. ff available
part,
hard-disk
: A device
which records
space is low when
TimeShift
and plays broadcast
is initialled.
program
It will disappear
contents
automalically
o In order to _ve hard-disk space, no storage is done when there is no eignaL
• The total storage space of hard-disk is 160GB, there are tOGB minimum
reserved
onto a hard disk
from lhe oldest
for TimeShift,
. When turning power on, it may take up to 3 minutes to initialize the HDD.
, The TimeShifl function will not initiate for a copy-protected
p_ogram.
. Because an analog broadcast
is transfered to a d_gilal signal, video that contains rapid movement
may
show "cross stripes", This happens when the analog signal is _mpre&_ed
and then restored in the digital
signal. The unit wilt attempt to soften the video in order to reduce this effect of excessive picture noise,
• When using the PIP/POP mode, TimeShift is stopped,
.In Video, Front Video, Antenna, Cable sources,
TimeShift
. tn Audio
only channel,
On progressing
_meshift,
Indicates
_d
TimeShift
4, Using the remote
It can do a diversified
that the curre_
displayed
vi_o
is available.
is not available.
playing.
broadcast
differ,
control
You can shift p_ayback to any point within pmayingthe recorded program
- When
• Like
playing,
_->
press the REW (_*)
_->
or FF (=-_) button,
_
->
2 ti_s
5 times
20 times
• If the button is pressed continuously,
away_ it changes a normaf playback,
- ff you wish to return
to a initial
_->
_
50 times
ff changes
portion
of Timeshift,
• Pressing
• Pressing
the A /V
screen.
the A button,
the V button,
button
on piaying,
the screen
the screen
Press the PLAY (l_) button
TV
press
the screen
wil_ be jumped
will be jumped
• After moving the cursor using the <1/_
directly viewed on the screen,
Plasma
is taken
thel_
bution.
During playback, press the Pause ( II ) button,
Still screen is displayed.
Repeatedly
press the Pause ( II ) button to advance frame by frame.
When pressing the Pause ( II )button,
Iongly,
will be shown,
- If you press
in the current
74
row
press the I_ button.
,, ff you want to return to the current live broadcast,
(Indicator will be changed to LIVE}
•
•
•
ina
300 times
like above, If the button
button
to return to a normal
will be jumped
back and forth
about 20 seconds forward_
about 8 seconds backward.
on playing,
playback,
the point of the cursor
is
Operation
-
This function
is able to record
-
"This function
records
1, Select
the desired
the currently
channel
wil_ start as marking,
3. You can select
the _ep_d
4. You can set the duration
watched
dispiayed
to record while
2 Use the -41/1_ button to select
recording
channel
of an Analog
or Digital
broadcast.
channel,
watching
the OK, OpUons
_
on main scr_n
program
and then press the RECORD
or Stop Record
and recording
(as shown
witl begin
_low
(e) button
in figure, A), If you setect the OK,
with basic settings.
to stop the recording.
of the recording
by selecting
Ol;_lio_s and then
ENTER
button
then the recording
played_ Press the _11/ll_ repeatedly to adiust the recording _ength, Each press of _1 _1_ button
duration in the sequence shown below:
30min -> I hour -> I hr 30rnin -> 2hr->
2hr 30min -> 3hr
changes
time is dis-
the recording
B,
Owner's
Manual
75
Operation
5 You can aJso add recording
add to the recording
No Change
The extra
-,> +lOrntn
recording
time by pressing
time, Each
-> +20rain
time added
the RECORD
press of _1/11_ button
-> +30rain
to existing
(e) button
changes
-> +40m_n ->+_mln
setting
vaiue makes
during
_nstant Record,
the recording
duration
Press the <1 fl_ repeatedly
in the sequence
shown
below,
-> +1hi
final recording
time length
C.
6. After adjusting
the recording
time, select
Tota_ recording
OK and the progre_
bar will _
displayed.
duration
time
• Press the EXIT button to hide the Progress
7,
Bar. Press the ENTER
button
Press the STOP (III) to stop recording, or when the recording duration
Although recording has stopped, the T_meshift features remain active,
to display
is reached,
the progress
bar.
the HD DVR will stop recording,
Notes:
.When
recording,
ff the available
storage
space become_
low, the re,_ording will be autometica@
oR_ordings
of less than 10 seconds wilt not be _ved,
.To save the disk space while recording analog or dtgital screen,
76
no data is savc_
oTbe recording function will not initiale for a copy-protected
,After recording,
marked time may be somewhat
different
program.
from actual
time,
*in no signal
from actual
#me,
Plasma
TV
or film source,
marked
lime may be different
when no signal
stopped,
is pre_nt,
to
Operation
- White recording, you can change channels or inputs, without distu¢bing
recorded will be shown in the lower-right comer of the main screen,
1. After _rting
an instant Record or Reserved
Record, chan_
*You can check the screen being recorded in the lower-right
*Press
*Press
the PIP button to cancem or show the screen
the SWAP button to return the screen being
,When changing to the channel
Reserved
Record slate.
being
recorded
the recording. And the screen
the channel or input.
corner the train screen (as shown
being
below).
being recorded.
recorded in Watch & Record
in Watch & Record,
_reen
is changed
to instant
Record
state or
screen being recorded
* Watch & R_ord
Input
rd
Dg_i
X
O
O
0
A_tog
Vi!deo
O
0,
O
0
O
O
O
#J
0
0
0
0
S
O
S
S
_or_2
0
0
0
S
F_
0
0
0
0
HDf_I,.'EM
O
0
0
0
S
O
S
S
Front
Video
0_*_3
P_i_
1
H_2
Note:
When digital
broadcast
is being
recorded,
another
- if you turn the power off on recording,
digital
broadcast
this _ssage
can net be tuned,
is displayed
- ff you selects Yes, recording stops and then power is off.
And if you selects No, recording continues
and then power
as shown
below.
is off.
Owner's
Manual
77
Opera#bn
TV Gu ide
0
Screen,.
System
- Your new TV contains the TV Guide On Screen interactive Program Guide.
- The TV Guide On Screen system has features that he_p you get the most out of your viewing
experience.
TV Guide
On Screen
system Overview
The TV Guide On _reen
• Eight days
of show listings (today
• icons that indicate
.intuitive
plus seven days),
rating, stereo,
navigation
HDTV,
using
new episode
your remote
etc,
control.
to Record_
• Schedule
show Reminder&
• Search
shows
• Search
for shows
• Direct tuning
by category
• Streamlined
based
(e.g.
Movies,
on keywords
Sports,
ChiMren,
or alphabetically
to a channel.
• Show inforrr_ation
while watching
System
Setup
_d
TV.
defautt
setting
options.
lineup customization.
• Help sc_'eens while
78
show
up/dowrd_eft/right
• Set shows
• Channel
system has the following features:
Plasma
TV
in the TV Guide On Screen
system,
etc.)
by title,
Operation
Screen Components
- The screens displayed in the TV Guide On Screen
nents, as shown in the following fig:ure:
• Video Window
- disptays
TV video
while the TV Guide On Screen
• Service
Bar - provides
access
• Current
Service
o indented to indicate current
•Tile
- displays
• Highlight
Label
o indicates
Box - provides
.INFO
Button
,Panel
an active
system
is displayed
Services
Service
displayed
Icons
for a highlighted
you can cycle through
identifies
Ad - location
tile
information
- indicates
Logo*
-Record/Remind
to the 4 main Guide
share many of the same compo _
show title
dNFO
,Channel
system
item
the various
Info Box sizes
netwoA
- indicates
a show is set to Record
where show_ or product-specific
or set as a Reminder
information
appears
(and also where
Panel Menu ap_ars)
Owner's
Manual
79
Operal/on
Q TV Guide
Scree
System
nTM
Panel Menu
• A Panel
Menu appears
apbears
• When
when the Menu key is pressed
when you press ENTER
a Panel Menu appears,
• The Panei
Menu displays
on a show starting
the highlighted
for a displayed
Panel
•The A tV
move
the options
between
•The left and tight arrows
odometer
,Pressing
from
Menu, for example,
E_ER
Reminder,
• Select
move
Schedule
from
80
tile changes
color to indicate the Panel Menu
relates to this tile,
the
INFO button.
within the Panel Menu,
options
unless
the highlight
is on an o_meter,
where these
arrows
change
the
or number
entry box moves
the highlight
to the default
com_nd
button
of that Panel
command
button
executes
the action
and ctoses the Panel
Menu (e,g,, Schedule
Cancel),.
any changes
Menu is a shortcut
of a menu.
Plasma
It also
Reminder.
a highlighted
• If a Pane_ Menu contains
bottom
are available,
in the future.
Menu by pressing
to adjacent
an odometer
Cance_ to cancel
,Pressing
options
choice,
E_ER
• Pressing
tile and additional
below the Video Win_w,
,Help is available
button
on a highlighted
TV
Simply
to Cancel.
and press ENTER
Press Menu to cancel
more menu options
scroll
to close this _nu,
any changes
than can be displayed
down to access these
options,
and close the menu.
on a single
sereen_ A i Y button
appear
at the top or
Operation
Main Services
Acce_
Listings by pressing the TV Guide button on your remote or on the front panet of your TV,
- Listings is always the first Service displayed in the Guide,
o With Us_ngs highlighted, press the Info button to d_play a Help screen_
Press the lnfo button again to d_
the screen,
Use the A/V/411
wi_in
Ustin_
/ I_ buttons
to move the highiight
to:
,View 8 days of show listings
,Read
show descriptions
•Tune directly
to a show currenUy
airing
•Set a show to Remind
,Set a show to Record
•Lock and unlock
•Access
Notes:
the Video Window
Panel and Channel
Ads
There may be times when the TV Guide On
Screen
ings
system
• Program
Guide
could display
The reasons
schedule
partial
or no program
list-
for this include;
information
was not provided
to TV
On Screen,
• The transmissJon
of the program
hstings
was inter.
rupted,
The phrase
#_formation
occur
Please
"No Listings'
during
will be replaced
the next transmission,
with program
which should
within the next 24 hours,
remember
order to receive
to turn off your
program
TV when not in use in
listings.
Owner's
Manual
8t
Opera_n
TV Guide
-
Search lets you 5nd shows by catego_
Screen,.
(AJphabetica[_
Movie&
Spor_,
Keywo_,
o With Search highlighted, press the [nfo button to display
Press the Info button again to dose the screen
.Category Search Examp_: Movies
I
82
From Search,
Plasma
TV
use the V button
to higHight
Movies,
a Help screen
System
Children_ Educatbna[
News
V.3r_ty, Senes,
HDTV) or by
Operation
2
Use tile V button
3. Press ENTER
and tJm_.
to highlight
to display
a subcategory
4. Highlight a show and press
ENTER
the Menu key to display the Epis_e
You can
channel
choose
to set a recording,
Go to Service
m_ion,
Tune
Bar - doses
and returns
le Channel
and tunes
(for example,
a list of aJl Movies,
AII)
by date
to watch (if on now) or
Op_ons menu.
a reminder,
the menu,
to the Search
organized
changes
Service
or tune
to the
no infor-
_r.
- exits the TV Guide On Screen system
to the channel
of the highlighted
show (show
airs in the future)
Note;
This option
r;gade Watch Now ff the show is cur-
rontiy airing.
Set Recording
which
- displays
Set Reminder
you
power
On, and auto4une
returns
can
- displays
which
Cancel
the Record
you can set frequency_
the Remind
set frequency,
start
Options
time,
menu, from
automatically
the TV.
- c_oses the menu,
to the highlighted
Op_Jons m_nu, from
start and end time, etc
changes
no information,
and
show
Owner's
Manual
83
Operation
Q TV Guide
• Keyword
Scree
nT.
System
Search
• Keyword search le_ you enter a word(s) to look for a particular show by cate_ry
1, Highlight
ENTER
the
2. Highlight
4. Highlight
Options
and press
and
Search
ENTER
press
menu,
button.
and use the <1 / I_ button
to search
When
label,
the Keyword
menu is displayed,
Category,
a category
navigation
to display
New Search,
3 The Search
etc.}.
Keyword
button
finished,
to select
(e.g. All, HDTV, Children,
use
the V button
Sports,
to highlight
Enter Keyword.
5. Highlight
6
Enter
Keyword_
ENTER.
Use the A / V .,'_1 /b" button
to highlight
and press
it. When comptete,
ENTER
to display
light Done and press
84
and press
Plasma
TV
ENTER
a character,
high_
or for every show title that matches.
Operation
7 A Fist of all matching
shows
for that
key"word
is dis-
ENTER
to dis-
played
You can
higNight
play at_ aidngs,
a show,
ing and press
Er_£rER to watch
Menu key to display
From
the
recording
viousfy
Episode
list-
(if On now) or the
the Episode
Options
a specific
Options
menu_
menu,
choose
a reminder_ or tune to the channel
to set a
as pre-
described
The
TV guide
you
creme.
keyword
and press
You can then higNight
on screen system
To edit or delete
and pre_
the
stores all the keywords
a keyword,
Menu
key.
higHight
A _arc_
the
Options
menu is displayed.
Go to service
mation
Edit
Bar - doses
and returns
Search
change
Delete
- displays
Search
*No
returns
the
changes
Service
keyboard,
no infor-
Bar.
where
you
can
the keyword
• Yes
Cancel
the menu,
to the Search
- closes
* A Confirm
- deletes
- closes
the panel
the menu,
to the higNighted
menu is dispiayed.
the Search
menu
changes
no info_ation_
and
show:
Owner's
Manual
85
Opera#bn
TV Gu iiide
Recordings
displays a list of previously
recording shows on a DVR,
Screen,.
recor_
or currentiy
W_h Recordings highlighted,
press the INFO button to display
Help screen, Press the INFO button again to close the _reen
Choose
the
Recordings
way
Recordings
on the Service
to display
the Recordings
to choose between
are
Bar _d
Options
displayed
menu.
,
shows
episode
Us_ - displays
episode
a complete
for a show(see
Titte - shows
example
ex_ple
_.
When
in a[ph_etical
Et..rII'ER to hightlight
with the selected
Options
the
and an Info box provides
Press the MENU
button
to display
the
menu.
for the a_ the recorded
_ist (pres
B)
Done_ Press
View. highUight a show and press ENTER
a summary
episode
in Screen
options.
an episode
show information
Episode
(see
by date and time. with
to dose the menu and display
tn List View_ higNight
tn Group
order
A)
press
again
Recordings
{3)
between
date and tim._ first (see ex_p_e
finished,
E_ER
A)
recorded
in _reen
to choose
Date - shows are displayed
most recent
4isting every
in Screen
list of every
are displa-yed
in Screen
between
are listed without
(see example
. In Sort By. use the <1/11_ buttons
•
button
Use the & s !V buttons
the follo_4ng:
recorded
recorded
higHightJng
then press the MENU
. In View As. use the <1 / I_ buttons to choose
Group
by
a
ENTER
shows
again to collapse
to view
aJong with the
the episode
lis£.
Highlight
display
86
Plasma
a specific
episode
the Episode
TV
and press the MENU
Options
rr_nu.
bu;ttos to
System
Operation
To view an epis_,
- Highlight
•
you can do one of the following:
an episode,
Go to Service
and press
Bar ° clo_
mation_ and returns
Delete
Episode
Recordings,
- deletes
A Confirm
_, No - doses
Cancel
and returns
- closes
to view it _ow_
the menu,
to the Schedule
_, Yes - deletes
.
ENTER
changes
Service
the episode
no infor_
Bar.
from the
menu is displayed
the episode.
the panel menu.
the menu,
to the highlighted
changes
no information,
show
Owner's
Manual
87
Operation
Q TV Guiide On Screen,.
System
- Schedule lets you review, edit, or delete Record and Remind events that you set previously.
- With Schedule highlighted,
press the Info button to display a Hetp screen. Press the |are button
- An icon identifies the event type:
Record
Once
_
--records
Regularly
_
on the same
Weekly
the show one time
--records
the show each time the show airs on
_--records
the same
the show every time the show airs
channe_ and starts at the same time
day of the week_ on the same channe_ and sta_
at
the same time
Off _--keeps
the show in the list but wi[I not record this
show until the frequency
is changed.
Remind
Once
_--sets
Regularly
a show reminder
_
--sets
show airs on the same
one time
a show reminder
eve_
channeJ and starts
time the
at the same
time
€.
Weekay
--sets
a show reminder
show airs on the same
channel
Off_
and starbs at the sam
--keeps
until the frequency
Highlight
each time the
day of the week,
on the sam
time
the show in the list but will not remind
is changed
an even_, and press the Menu key for options
Go to Service Bar - doses the menu changes
and returns to the Schedule Service _r.
Tune to channel
show.
no information,
- exits the Guide and tunes to the highlighted
Delete Recording
- removes
after a Confirm screen.
the recording
from the _#_ule
Edit Recording
_ opens a menu from which you can change
existing recording information
Set Reminder
- opens a menu from which you can set a
Reminder for the show (Record is not cancelled).
_ncel
_ c_oses the menu, changes no inforrr_tion,
and returns
to the highlighted show,
88
Plasma
TV
ag_n
to c_ose the screen.
Operation
After
you inifJatly complete
* Change
System
* Change
Channel
- Change
DefauR
Guide Setup,
you can make
chants
to Guide settings
in the following
areas:
Settings
Display
Options
Highlight a choic_, press ENTER, and follow the on-screen
instructions.
With Setup
screem
highlighted,
press
Press the infe
button
• Change
This
option
Setup
System
Settings
appeam
after you
Press ENTER to display
Choose
again
to display
a Help
to close the screen
have
completed
the initial Guide
process
see your current
screen
the Into button
the Confirming
"four Settin_
screen,
You
setting&
one of the optJons,
press
ENTER,
and follow
the on=
instructions,
Owner's
Manual
89
Opera#bn
G TV G u iide
i
. Change
Change
Channel
Channel
that appears
Screen,.
,
Display
Display
lets you edit channel
in Listings,
With
Change
information
Channel
Display
you can
• Change
Listings
the position
the channel
• Change
• Swkch
number
the tune channe_ number
is always
Off - the channel
Auto-Hide
program
Press ENTER
is only displayed
information
is available.
to disptay
the Channel
highlight
_nu
is displayed,
a channel
Go Back
informa_on_
displayed
is never displayed
- the channel
Then,
Or make
in the
a channel
_, On - the channel
Highlight
te indicate where
displays
changes
and press
to Setup
and return
Editor
Menu,
te close
to the Setup
screen..
A Grid Options
the menu_ change
Service
and when finished
light Done_ Press ENTER
when
press
again to dose
no
Bar
ENTER
to high-
the menu and accept
the changes
HigHight
Cancel
and return
90
Plasma
to ctese the n_nu
to the highlighted
TV
channel
change
no information,
System
Operation
• Change Default Options
Change
Default
following
Options
• General
default
settings
in the
Default Op_ons
.Record
Defaults
• Remind
Defaults
Highlight
Change
Genera[
.The
_ets you change
categories;
Default
Op_ons
Iets you set defaults
initial tnfo Box size when the
TV guide
for the fo_owing:
on sc_een system
is
entered.
Choices
are No, Small,
Large, and Last Used
(DefauJt = Last Used).
• The Info _x
size rota_on
the TV guide
Choices
are No only, Small
Large, Small
• Automatic
HigHight
mation,
When
again
only, No & Sin.all, No &
General
finished,
press
ENTER
to close
return to the highlighted
and press the Menu key to dis_
menu.
Ear to close the menu,
to the Setup
to dose the menu
Cancel
= On).
Default Options,
Defaurt Options
Go to Service
(A_o-Guide)
On.
are On and Off (Default
and return
HigHight
in
= AH)
entry into the TV guide on screen system
play the Genera[
HigHight
onFy_ Large
& Large, AH (Default
when the TV is powered
Choices
when the [nfo key is pressed wMe
on screen system
Se_ice
to highlight
and accept
the menu,
change
no infor-
Bar.
Done,
Press
ENTER
the changes
change
no information,
and
option.
Owner's
Manual
9t
Opera#bn
0
TV G u iide
< Record
Defaults>
• Record
• When
Default
Opttans
lets you set defauffs
to start the record
to 120 minutes
• When
Sc reenT. System
late
event, Choices
• Recorder
Highlight
Highlight
P_ease choose
other devices
Record
the Record
eady
= On time)
the HDD
on4y. This TV does
feature_
and press the Menu key to display
Options
menu.
8at to dose
and return to the Setup
< Remind
are 120 minutes
v,4th a recording
Defaults,
Default
Go to Service
mation,
Choices
eady
= On time)
]ate, to On time. (Default
choice:
not support
are 120 minutes
to On time, (Defautt
to end the record event.
to 120 minutes
for the following:
the menu_ change
Service
no infor-
Bar.
Detau_ts>
Remind
Defautt
,Power
On the
Options
TV,
tets you set defaults
if _,
Choices
are Yes and No
(Default
= No)
oAutomaticaily
tune
a Reminder
the TV to the channe_
when a Reminder
(Default
when
is scheduled.
for the following:
Choices
is scheduled
CCv' must
be On),
are Yes and No.
= No)
• When to dispiay
to 15 minutes
the reminder
screen,
early, to 30 seconds
Choices
are 30 seconds
to 15 minutes
late, to On
time,
(Default
= I rain eady)
Highlight
Remind
the Remind
Highlight
information,
and return
press
and press the Menu key to display
Options
Go to Service
When finished,
again
Defaults
Default
Bar to dose
ENTER to highlight
to close the menu and accept
Highlight
Cancel
Plasma
TV
the menu,
to the Setup Service
to dose
and return to the highlighted
92
menu.
the menu,
option,
change
no
Bar
Done. Press ENTER
the changes.
change
no information,
Operation
Record And Remind Features
You
can
set
Schedule
There
a show
or change
to
Record
Record
in Listings,
settings
Search
and
for a show in Schedule.
are 3 ways to set a show to Record:
the Record
button
Once
with current
default
On
Time).
Each
time
change
the record
among
Once
on the remote
settings
you
frequency
the
(but
(default),
Regularly,
Re_rd
icon appears
--records
4, Regularly
the show one time
--records
the show
and End recording
Record
not the
button,
default
WeePJy,
the show every ti_
channel
and starts
Off,
settings)
_d
O
Weekly
--records
the show each time the show
airs on the same day of the week,
on the same
then
and starts at the same flrr_
• Off (not cancel)
_--keeps
the show in the list but
will not record this show unti_ the frequency
The proper
Record
2) From
• Highlight
Options
button
a Panel
channel
you
Cancel
Note;
the
at the same
time
to record
(Start
press
_
show airs on the same
1) Using the Record Button: on the Remote
• Press
,, Once
is changed
on the show ti/e as the
is pressed
• Cancel
(no icon
displayed)-_oes
not record
Menu
a show,
and press
Menu
to display
the
Episode
menu.
• Highlight
Record
', Highlight
arrows
Set Recording,
Options
menu.
the
Frequency
to choose
as previously
• Recorder
option,
Once,
ENTER
and use the
Regularly,
to display
the
left and right
Weekly,
and Off,
describe.
choice:
not support
among
and press
Please choose
other devices
Note:
Video Window
button
in Listings
the HDD only. This TV does
with a recording
Lc_ck is sw#ched
fe_ure.
to on or off using PIP
mode.
Owner's
Manual
93
Opera#bn
TV Guide
When
finished,
Press ENTER
the selected
Highlight
press
ENTER
• Highlight
Cancel
Options
the A _V l
ii_i!i!_i
(b) TV _1--_
MicroMV
Camcorder
Note:
When connect#1g the DVHS and the MicreMV
Camcorder
window, it's okay,
Camcorde_
you may see 'input error'
on the MicroMV
Owner's
Manual
99
Opera#bn
IEEE 1394 Functions
2, When
connecting
move the Ill_
the DVHS and the MicroMV
1394 in HOME
(c) TV
_9( • ._
Camcorder,
menu to show the control
DVHS + MicroMV
as shown
in the figure
(c) or (d),
pane] and then setect the DVHS
press the
button
or the MicroMV
Camcorder
Camcorder
Cab_e>
Connection
Camcor_r>
the 1394 and then playing, you must use the original
DVHS tape.
If not, it may not play or have errors.
- If the operation normally doesn't
ment of connected device.
100
Plasma
TV
work on Daisy Chain connection,
please change
an arrange-
to
Operation
•
How to play the DVHS
1. Connect
the iEEE 1394 _ack at the TV to the {EEE 1394
jack at the DVHS with IEEE
3. Press the A _'V buttons to seEect the DVH$
then use the ENTER button.
• Show the controt
panel
and
of DVHS,
Owner_
Manual
10I
Operation
IEEE 1394 Functions
* The cor_tro[ panel of DVHS
-Depending
on the connected
equipment,
marked
1
1 DVHS
may be different.
2
Equipment
to the 1394
Company
4. DVHS Operating
5. Power OtdOff
6. DVHS
panel
Mode_
2, Connected
3. DVHS
control
Status
Ptay Time
7. Tape Status
• Ta_
shape
• Lock shape
8 Initializing
9. DVHS
Icon _ Tape in or not
icon - Wdtabte
or not
Play Time
P_ay; Pause,
Step, Search
Skip, Record,
DVR Record,
or DVR
Stop,
(Notes;
. Skip-
This function
It searches
On skipping_
displayed
In some
is for a fast search,
the program's
Search
on the Control
models,
start point.
(,_f _),
Skipping
Pause
( iI ) and Play (1_) are
PaneL
is not a option (_
p,_ ) function.
Supported DVHS List
Notes:
° In case the DVHS
plete/y
pulled
* _'_;Sen .searching
the DVHS
t02
Plasma
TV
have a incorrect
recogm_tion,
out and then connected
the screen(_
may tare respond
_tn.),
the power
cord of DVHS is cgm-
again.
the DVHS
by devices.
may be strangely
seen. And also
Operation
•
How to play the instant
1. When
the _
reecord
to the DVHS
watching the TV, press the
button to _ve
1394 in HOI¢I(£ menu and then ENTER: button.
2 Press the &/V
buttons
the ENTER button,
• Show
3. Press the _1, / V / <11/ I_ buttons
ENTER
button,
to move
to ill and then use the
You can record the current
program
to the DVHS,
panel
4, Press the A / V / 4 / I_ buttons
use the E_rTER
" Show
The instant record function
the control
to se}ec_ the :DV[-_ and then use
can not be used with copy-protected
of DVHS.
to move
to I
and then
button,
the control
panel
of DVHS,
programs,
Owner_Manua!
103
Opera#bn
IEEE 1394 Functions
41, How to save the DVHS to the DVR
1. On p_aying the DVHS
Et-KER button.
• _ve
the current
2. Press the A/V
press
the A t V / < / I_ buttons
,_<1/ _ buttons
disptay on the screen
Plasma
TV
the
screen to the DVR.
When you save the
104
to move to DVR • and then press
to move
to D'_'2 II and then
program which
use the ENTER
is copy - protected
and will not save to the DVR.
button
to end a saving.
to the DVR, "T_s
t_e
is copyoprotected"
is
Operation
•
How to save the DVR to the DVHS
1_ When press the
can select the wanted
,,I_ buttons
button, record list is dispJayed, You
program by pressing the A _V/_1
2_ Select the D_S
and then
Out
press the E_ER
by pressing the A/Y
buttons
button
And then press the Et'_TER button.
Press the & / T buttons to se{ect the
wanted devioe and
select Record.
3. Press the _I/l_
press
the ENTER
buttons
to move
to the STA_
and then
4. Press the ENTER
button
to stop a saving,
button to save to DVHS,
• By pressing the _SUMZ
tiously save the recorded
of Mopping time.
The copy-protected
bt_ton_ you can concontents from a _int
contents
couldn't
save to the DVHS,
Owner_Manua!
105
Operation
IEEE 1394 Functions
•
How to play the MicroMV Camcorder
1. Connect the IEEE 1394 jack at the "r,! to the tEEE 1394 jack at the MicroMV
Camcorder
with IEEE 1394 Cable.
2. When watching the TV,
the _EE 1394 in HOME
press the
menu and then
button t:o move
ENTER button.
3, Press the A _V buttons to select the
Camco_er
and then use the ENTER
o Show
t06
Plasma
TV
the control
pane[ of CAM;.
buttem
Operation
• _n camera mode of MicroMV
panet is showed.
', Show
Camcorder,
this controM
the contro_ panel of CAM
Supported
MicroMV
Camcorder
List
Press the TV INPUT button to stop the JEEE1394
function
• The contro_ panel of MicroMV Camcorder
-Depending
on the _nnected
equipment,
marked
1
control
panel may be different.
2
3
4
1, MicroMV
Camcorder
2. Connected
Equipment
Mo_
to the 1394
3 MicroMV
Camcorder
Company
4 MicroMV
Camcorder
Operating
5_ MicroMV
Camcorder
Play Time
Status
& Tapa Status
- Tape shape
7 MicroMV
Stop, Pause,
8. Lnitializing
Icon - Tape in or not
Camcorder
Play, Search_
DVR R_ord,
Record,
or DVR Stop
Play Time
Owner_
Manual
107
Opera#bn
IEEE 1394 Functions
•
How to save the MicroMV Camcorder
1, On ptaying the MicroMV
ENTER button,
,,Save the current
2, Press Me _ ,_
Notes:
• tn memory
bu_ons
Camcorder,
screen
to DV_I
Camcorder
• Regardless
of a mode of MicroMV
108
TV
Plasma
press the & iV
J< t_
buttons
to move to
D_O
and Men use the
to the DVR_
to move
mode of MicroMV
to the DVR
and then use the ENTER
it doesn't
Camcorder,
apply
to connect
if the tape is ejected,
bu_on
to end a saving.
the IEEE1394.
it doer':
apply
lo connect
the IEEE1394.
Operation
: DTV
Link
applies
to 1394
connection
of device
labeled
with
DTV
Link
logo.
tt is normal s_ndard
troles another
of CEA which con-
unit by a remote
and displays
OSD a from one un_ to the other by using a
•
How
to play
the
DTV
Link
_....
/
/
of IEEE1394,
2. When watching the TV_ press the _button
the [EEE 1394 in HOME menu and then press
button,
1, Connect the IEEE 1394 jack of the TV to the _EEE 1394
jack of the DTV Link supported
device IEEE 1394 Cable,
3. On playing the DTV Unk, press the 41 ,,'i_ buttons
to IBVRO and then press the ENTER button,
* Save
the current
5. Press the TV INPUT
fun_on.
screen
to move
4, Press the ENTER
button
to stop a saving,
to the DVR
button to stop the [EEE1394
Notes:
o On a condition
of connecting
DTV remote
co_qtroL
( ex, change
of c_nneL
o Analog
channel
I394, you _n
play_ record,
control the D_
a show of recording
Link device while watching
the OSD through
D_/and
#',_ etc,)
is not suppoded
o In case a device
see a screen
t.he tEEE
outputting
MPEG2
even ff # doesn't
TS Data through
control
directly
IEEEt394
port but # does'Yt
support
to DTVLin&
you are able to
on TV,
Owner_Manual
1_
Operation
IEEE 1394 Functions
O, Don't connect
!
• When connecting
with these 2 methods,
the iEEE1394
will not
work
properly.
(a) LOOP Connection
!_'!!_l
'_:_i_/_
_i_!_!_i_'_i_'i_'i!!_!_!_!!_iii_i!iiii!ii!
I!
Cable>
and over,
with 2 _vices
the 1;394 wi|l not work proof|y,
and over, it's undesirable,
the
Operation
@ Remote
Control
PIP (Picture-In-Picture)
/ POP / Twin Picture
o PIP lets you view 2 different inputs (sources)
source will show a smat_er inset image.
on your TV screen
at the same time. One source
will be large, and the other
- Twin Picture mode splits the screen into two irr_ges, allowing two picture sources to be shown on the TV screen at the same
time. Each source is given half the screen.
- if you set the bmock/rating for Lock menu options in PIP,_win Picture mode, "Rating Blocked" doesn't display on screen.
Press the P_P button
to access
the sub pic_te.
Each press
PiP Mode
of P_P changes
the PIP options
as shown
POP Mode
beJow.
Twin
Picture Mode
PIP Off
Use the PiP iNPUT
the P_P source,
button
to select
You can also select
Main Picture Source
the input source
sources
for the sub picture
for the Sub _put
Each press of PIP INP_
button
changes
in the $11_JP menu,
Available Sub P_ctu,re Sources
.............................
DTy .............................................................................................
Y!_o .....................................................................
Analog
DTV_Analog_ Video_ and Front Video
Relatedly,
use the SWAP
button
to switch
the main and sub pictures.
. Component
i, Component 2, RG_PC
(or RGS-DTV),
be used to swap the main and sub pictures.
Main Picture
1, Ptess thePIP
Sub Picture
HDMIiiDW,HDMI2
input sources for the main pictu_
can't
[ Main Picture
button,
2, _iect
the Antenna or Cabte option on the Sub input menu or with the PiP INPUT
PITHbutton to select a channel for the sub picture,
(You can't seiect DTV for main and sub picture simultaneously).
button
Use the PIPCH+
,_
Owners
Manual
11I
Opera#on
In PIP mode,
screen
press
Use the &/V/_!1
the & iV/4
t_
button
I_
button
to change
Le)
to move the sub picture
main and sub picture
to a different
sizes in Twin Picture
location
on the
mode,
If screen is adjusted to the
maxima[ size, the large
screen is filled with entire
screen
ve_caE[y
as shown.
Use POP to search the programs of alt the memorized
channels one-by-one
(while the main picture source remains the current channel), The pictures
are searched with the 3 POP screens,
on the 3 P_P screen display,
of aH the programmed channels
Notes:
*Run EZ Scan channet search b¢.*fore using POP mode.
°When Sub pictures are changed from the TV/DTV to CATV!CADTV
from the Tuner switch,
1. Press the PIP button to activate
- Channel selection:
screen to shift itfor
the POP m_e
in POP mode,
it may make
whi_e in PIP mode_
Use _ button to enlarge the selected
viewing on the Main screen.
channel
being
searched
on the PIP
• PIP selection: Use A / V button to select one of 3 PIP screen pictures in POP mode.
, When watching TV!CATV on M_n picture, TV!CATV or DTV!CADTV on Sub pictures are in channel scanning_ However, when watching DTV/CADTV on Main pic#Jre, onUy TViCATV on Sub pico
ture is in channel
s_nning
2, Press the EXIT button
1 t2
Plasma
TV
to cancel
POP mo_,
a noise
Operation
APM (Adaptive
Picture
o Allows
preferred
a viewer
and _tom)
to select their
picture
Mode)
mode after compaidng
the four different
picture
(_ighft,
Morm_,
Night TL_e
settings
1. Press the APM button at once. As shown below, the screen is
divided to 4-split.
Use the & IV/4/1_
button to navigate 4 EZ Pictures
By pressing the ENTER button, you can select the desired mode
2, Press the APM button, again
A_ shown
screens are displayed.
You can easily compare with 4 modes.
below,
the
4=same
3 Use the A IV _1 tl_ button to navigate 4 EZ Pictures, By pressing the ENTER button, you can select the _sired
mo_.
4_ Press
EXIT button
to return to TV viewing
Note: While operating the 4-split.
remote control are not usable_
any button
except
APM,
ENTER,
EXIT, VOLUME
A i V,
MUTE
button
on the
Owner_Manual
113
Opera#bn
Brief Info.
O_ration:
* Watching TV/DTViCATV/CADTV
• Watching Video, Front Video
, Watching IEEE 1394
+ h Com_nentl,
Component2,
RGB,
HDMI1/DVt,HDMI2
modes, INFO button
is not working,
Function:
• Show the present screen information.
• On Watching with the upper Input signaJ,
press the INFO button.
• Press the INFO button or EXIT button to
exit,
A: Banner information,
.
B:
C:
D:
E:
F:
G:
H:
iiiiii)):H))ii_:
i'ii_iiii)i!ii)iiiii))_),iiii
+iiii+i!i:'i_pi+,ii
)ii
ii)
i)i+iI)080i_
Refer to the
Program _te
Day, Month, Year
Program start tirr_
Show the prosessing rate
Program finish time
Current t_me
Ad#_d inform_on. Refer to the icon
exp(anation.
I: Program +nform_tJon
B
,,,
1 t4
Plasma
TV
C
D
E
F
G
A
Operation
EZ Mute
-
Nothing to do with Caption on/Off using M:_E button, De trade selected Caption!Text
is to be displayed_
When you repeatedly press the MUTE bL_ton_ the sound mode is changed in turn, (Refer to the picture betow)
Mute
: Sound
is muted
EZ Mute : a special mute mode to
activate the closed caption, autom,atically.
Mute
Off : Sound
is enabted.
Note:
, EZ Mute only operates
in DTV/Analog/Video/Front
VideoilEEE1394.
Owner's
Manual
115
Opera#on
Screen Setup for PC mode
. When RGB connect to PC output and select the RGB-PC in Main Inp_, this function is used.
• When HDMI/DV[
connect to PC output and select HDMliDVt input, this function is used.
• _n RGB-DTV
mode, SIZE and PHASE is net av_lable.
• After connecting
Display
RGB-PC
PC Adjust
Position
or HDMI/DVI
Menu using ADJUST
Adjust
_e
o Size
Adjust
the screen
-
Adiust the ph_e
In HDMtiDVt-PC
Phase
Reset
1 t6
Plasma
Initia[izatmg
TV
screen
position.
to PC output
and checking
the screen quality:
button
After dispiayi#g
_e
size
of Pixe_ clock,
mo_
PHASE
is not avaiiabte_
Size, Posffion_ Phase adjustment.
Adjust,
sele_
_e
screen
position.
External
Control
Device
Setup
Connect the RS-232C inp_ jack to an external
and centre( the Monitor's functions externaJ(y
-
control
device
(such
Connect the seda( port of the centre) device to the RS_232C jack
RS-232C connexion
cab(es are not supplied with the Monitor
as a computer
on the Monitor
or an AiV centre(system)
back panel
PC
No.
Pin Name
1
1
No connection
2
RXD (Recebve
data)
3
TXD
data)
4
5
DTR (DTE
GND
si_
6
DSR (DCE
side ready)
7
RTS (Ready
8
9
CTS (C_ear to send)
No Connection
5
(Transmit
@ oood#@
ready)
\\
to send)
6
3-Wi re Configurations
(Not standard)
7-Wire Configurations
(Standard RSo232C cable)
PC
o
PDP
PC
PDP
ii.......
RXD
TXD
GND
DTR
DSR
RTS
CTS
D-Sub 9
D-Sub
TXD
RXD
GND
DSR
RXD
TXD
GND
DTR
TXD
....................................................................
RXD
GND
DTR
DTR
CTS
DSR
RTS
DSR
RTS
RTS
CTS
CTS
D_Sub 9
D-Sub 9
Owner_
Manual
117
External
Control
Device
Selup
Use this function to s_cify
a TV ID number.
Refer to 'Real Data Mapping _, See page 119,
1, Press the MENU
2
button
and then use &/V
button
to select
the _'l'b'3ff menu,
Press the I_ button and then use A / V button to setect SET IZ),
3. Press the I_ button and then use A/V
desired TV [D number. The adiustment
4, Press EXIT button to return
the previous menu,
bL_on to adjust _
to choose
range of $FI'_B is 1 ~ 99_
to TV viewing
or press
• Baud rate : 9600 bps (UAR_
(reverse)
button
to return to
• Stop bit : 1 bit
• Communication
• Data length : 8 bi_
• Parity : None
* Use a crossed
MENU
the
code : ASCII
code
cable.
Transmisdon
I[Commandil[Comman_][
][Set ID][
][Datal[Cr]
I
* [Command
1]: Fir_ command to control the set, (j,k,m or x)
* [Command
2]: Second command to control the set.
- [Set [D]: You can adjust the set JD to choose desired TV ID
COMMAND
i COMMAND
2
number in Setup menu. Adjustment
range is 1 ~
99. When selecting Set ID '0', every connected
the
TV is controlled,
Set iD is indicated _ decimal
DATA
(Hexadecimaii,
(1_)
on menu
and as Hexa decimal
(Ox0_Ox63)
on transmission/receiving
protocol,
[DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
01. Power
k
a
0 _ 1
02, Input Select
k
b
0 _9
O& Aspect Rat_o
04, _reen
Mt._te
k
k
c
d
*
0 _ 1
* [Cr]: Carriage Return
ASCII code '0×0D'
05, Vo_urr_ Mute
k
e
O _,2
* [
06 Vc4ume Control
k
f
0 ~ 64
]: ASCH code 'space
(0x20)'
OK Acknowledgement
[[Command2][
09. Color
k
i
i0. "nr_
k
L
k
_
12, OSD _le_
:_
_
0 ~ 64
The TV
format
is data
data is
puter
6__
0 -. 1
Lock¥÷/L_k ..................................................
_..................................
14, PIP/Twin
k
15, PIP Posff#n
k
n
0,1,2,5
l& TreMe
k
r
O _ 64
17, Bass
k
s
0 _64
18._ce
........................k
t
0 _e4
!9. C_9
ratu_
ut _u[_
I[Command2][
j
£
j
COMa
MAND
Add/De[
27_ _
Data
*
hput
29.
PIP Inpu4
t t8
s
_M.
1
MAND
_ect
Plasma
m
TV
2
(Nexa_mal}
b
x
b
y
DATA 1
_
*
*
DATA 2
He>;adecJma])
#[ #-_
0 -- 1
_y
x
_ect
1: Hle_t Code
2: Not supported
function
3: Wait more time
1 ~3
DATA 0
..................................
m
.....................................
___
28.
[
......................
j .........................................................
[ .........................................
24. Orbiter Pixe_ _tt[ng
Tuning
][Set _D][ ][Ne][Data][x]
* _e TV transmi_ ACK (acknowledgement)
based on this
format when receiving abnormal data from nonwiable
functions or communication
errors
.....................................
K ..................................................
U.....................................
...........
23. Orbiter Tirr_ _tting
Channel
]
Error Acknowledaeme_t
.......................................................................
J........................................................
q....................................
.........
_.
][OK][Data][x]
............................................
k .........................................................
Y ............................
__:_3:.....
2t. mSM Method
25_ Cha££e[
][Set tD][
transmits ACK (acknowledgement)
based on this
when receiving norma_ data, At this _me, if the data
read mode, _ indicates
present status data. [f the
data wrffe mode, it returns the data of the PC com-
DA_'A 3
DATA 4,
He×8de_4ma[) He
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 132
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 4, 0, 0, 13
Create Date : Sun Jun 27 04:10:29 2010
Author :
Title :
Subject :
EXIF Metadata provided by EXIF.tools