LG LRFD21855ST User Manual REFRIGERATOR Manuals And Guides L0521420

LG Bottom Mount Refrigerator Manual L0521420 LG Bottom Mount Refrigerator Owner's Manual, LG Bottom Mount Refrigerator installation guides

LRFD25850 L0521420

User Manual: LG LRFD21855ST LRFD21855ST LG REFRIGERATOR - Manuals and Guides View the owners manual for your LG REFRIGERATOR #LRFD21855ST. Home:Kitchen Appliance Parts:LG Parts:LG REFRIGERATOR Manual

Open the PDF directly: View PDF .
Page Count: 36

Download
Open PDF In Browser	View PDF

BO'I-I'OM FREEZER
REFRIGERATOR
°s Guide
Please read this guide thoroughly
before operating and keep it handy for
reference at all times.

'rEUR
R
I"EUR
avant de mettre
& portee de la

referencia

P/No. 3828JL8032B

English Version
French Version

Spanish

Version

Warranty

(U.S.A.)

Warranty

(CANADA)

4
5-6

Safety Instructions
Grounding

Requirements

Parts and Features
Refrigerator

Installation

Unpacking

8-14
8

Your Refrigerator

Installation

Removing

Crisper

Crisper Cover with Lattice on inner
Surface

Glide N Serve

Modular

Door Bin

Dairy Bin

Egg Box

I_ Freezer

section

Tilting Door

Ice Bin

Freezer Wire Door Rack

Durabase

and Replacing

Your Refrigerator
and Doors
Leveling

Removing

Durabase

Handles
9-13

and Door Alignment

Base Cover

Divider

Pull out Drawer

Water Filter

14
Care and Cleaning

Using

Your Refrigerator

Ensuring

Proper Air Circulation

15-24
General
15

Multi-Flow

Setting the Controls

Adjusting

Control Settings

Food Storage Guide

Storing

Frozen Food

I_ Refrigerator
Water Dispenser

Refrigerator

Wine Holder

Optibin Crisper

Crisper Humidity

Tips

Outside

Inside Walls

Door Liner and Gaskets

Plastic Parts

Condenser

Coils

25-26

Power Interruptions

When you go on vacation

When you move

About

the Automatic

Connecting
Control

Cleaning

Light Bulb Replacement

section

Shelves

25-26

Icemaker

the Water

Line

27
28-31

19
Troubleshooting

Guide

32-35

Your LG Refrigerator will be will repaired or replaced, at LG's option, if it proves to be defective in material or
workmanship under normal use, during the warranty period ("Warranty Period") set forth below, effective from the date
("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser
of the product and effective only when used in the United States, including Alaska, Hawaii, and U.S. Territories.
WARRANTY

PERIOD:

HOW SERVICE IS HANDLED:

REFRIGERATOR/FREEZER

In-Home Service (Except Model GR051):
Please retain dealer's dated bill of sale or delivery
ticket as evidence of the Date of Purchase for proof of
warranty, and submit a copy of the bill of sale to the
service person at the time warranty service is
provided.
Please call 1-800-243-0000 and choose the

LABOR: One Year from the Date of Purchase.
PARTS: One Year from the Date of Purchase.
SEALED SYSTEM (Compressor, Condenser, and
Evaporator)
LABOR: One Year from the Date of Purchase.
PARTS: Seven years from the Date of Purchase.

appropriate option to locate your nearest LG
Authorized Service Center. (Phones are answered
24 hours a day, 365 days per year.)

Replacement Units and Repair Parts are warranted
for the remaining portion of the original unit's warranty
period.

Or visit our website at: http://www.lgservice.com

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS
WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE
FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE,
INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER
BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may
not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to
state.
THIS LIMITED WARRANTY

DOES NOT APPLY TO:

•

Service trips to your home to deliver, pick up, and/or install the product, instruct, or replace house fuses or correct wiring, or
correction of unauthorized repairs.

•

Damages or operating problems that result from misuse, abuse, operation outside environmental specifications or contrary to the
requirements of precautions in the Operating Guide, accident, vermin, fire, flood, improper installation, acts of God, unauthorized
modification or alteration, incorrect electrical current or voltage, or commercial use, or use for other than intended purpose.

•

Repairs when your LG refrigerator is used in other than normal, single-family household use.

The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTERACTIVE CENTER NUMBERS
To obtain Customer Assistance, Product Information,
Dealer or Authorized Service Center location:

Call 1-800-243-0000

(24 hours a day, 365 days per
year) and select the appropriate option from the menu.
Or visit our website

TO CONTACT LG ELECTRONICS

BY MAIL:

LG Customer Interactive Center
P. O. Box 240007
201 James Record Road
Huntsville, Alabama 35824
ATTN: CIC
3

at: http://www.lgservice.com

LIMITED
WARRANTY (CANADA)
LG REFRIGERATOR
LG Electronics will repair or at its option replace, without charge, yore product which proves to be detective in
material or workananship under normal use, during the warranty period listed below fiom the date of original
purchase. This warranD is good onb 7to the original purchaser of the product during the warranD period as
long as it is in any Canadian Pro+Jnce.

WARRANTY
MODEL# : LRFD21855**/LRFD25850**

PERIOD

LABOR : 2 Years

PARTS : 2 Years

SEALED SYSTEM : Labor/2 Years, Parts/5 Years (Compressoi; condensm; and evaporator)
HOW SERVICE IS HANDLED : Call 1-888-542-2623 (1-888-LG-CANADA) and choose the appropriate
prompt. Please have product type (refrigerator) and ZIP Code ready.
See our website at http:iA_vw.lg.ca
This wananty provides in-home sin:ice.
No other express warranty is applicable to this product. THE DURATION OF AN_f IMPLIED WARRANTIES,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY HEREIN'. LG ELECTRONICS USA, INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONWIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL
ARISING OUT OF THE USE OF, OR
INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY APPLICABLE TO
THIS PRODUCT.
Some provinces do not allow the exclusion or lhnitation of incidental or consequential damages or lhnitations on
how long an implied wananty lasts; so these limitations or exclusions may not apply to you. This wananty gives
you specific legal rights and you may also have other rights which vary fiom province to provthce.

THE ABOVE WARRANTY
1.

Service

trips to your home to deliver and pickup,

o1"correction
2.

Damage
of God.

Commercial

of unauthorized

DOES NOT APPLY TO:

install, instruct, or replace house fuses or correct wiring, plumbing,

repairs.

to the product caused by accident, verlnin,

fire, flood, alteration,

misues, abuse, improper

installation,

or acts

use or use for other than the intended purpose.

Therefore, these costs are the responsibiliO of the consumel:
CUSTOMER

ASSISTANCE

NUMBERS:

To Prove WarranO _Coverage:

Retain your Sales Receipt to prove date of purchase.
A copy of your Sales Receipt must be submitted at the time
wananty smice is provided.

To Obtain Product, Customel; or
Selwice Assistance
by phone:

Call 1-888-842-2623 (1-888-LG-CANADA) and choose the
appropriate prompt.
http://_v.lg.ca

or by Internet:
To Obtain Nearest Authorized
Service Centel; Parts Distributol;
or Sales Dealer
by phone:
or by Internet:

Call 1-888-842-2623 (1-888-LG-CANADA) and choose the
appropriate prompt. Please have your product type
(ret?igerator) and ZIP Code ready.
--_

http://_v.lg.ca

This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you
of hazards that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING, CAUTION. These words mean:
You will be killed or seriously injured if you don't follow instructions.

You can be killed or seriously injured if you don't follow instructions.

Indicates an imminently hazardous situation which, if not avoided,
may result in minor or moderate injury, or product damage only.
All safety messages will identify the hazard, tell you how to reduce the chance of injury and tell you what can happen if
the instructions are not followed.

To reduce the risk of fire, electric shock, or injury
to persons when using your product, basic safety
precautions should be followed, including the following:

• This refrigerator must be properly installed in accordance
with the Attention Installer Instructions that were taped
to the front of the refrigerator.

Read all instructions before using this appliance.

• After your refrigerator is in operation, do not touch the cold
surfaces in the freezer compartment when hands are damp
or wet. Skin may adhere to the extremely cold surfaces.

• NEVER unplug your refrigerator by pulling on the power
cord. Always grip the plug firmly and pull it straight out from
the outlet.
• Repair or replace immediately all electric service cords that
have become frayed or otherwise damaged. Do not use a
cord that shows cracks or abrasion damage along its length
or at either the plug or connector end.
• When moving your refrigerator away from the wall,
be careful not to roll over or damage the power cord.
• DO NOT store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
• DO NOT allow children to climb, stand or hang on the
refrigerator doors or shelves in the refrigerator. They could
damage the refrigerator and seriously injure themselves.
• Keep fingers out of pinch point areas; clearances between
the doors and cabinet are necessarily small. Be careful
closing doors when children are in the area.
• Unplug your refrigerator before cleaning or making any
repairs.
NOTE: We strongly recommend that any servicing be
performed by a qualified individual.
• Before replacing a burned-out light bulb, unplug the
refrigerator or turn off power at the circuit breaker or fuse
box in order to avoid contact with a live wire filament. (A
burned-out light bulb may break when being replaced.)
NOTE: Setting either or both controls to the OFF position
does not remove power to the light circuit.

• In refrigerators with automatic icemakers, avoid contact
with the moving parts of the ejector mechanism, or with the
heating element that releases the cubes. DO NOT place
fingers or hands on the automatic icemaking mechanism
while the refrigerator is plugged in.
• DO NOT refreeze frozen foods which have thawed
completely. The United States Department of Agriculture in
Home and Garden Bulletin No. 69 says:
...You may safely refreeze frozen foods that have thawed if
they still contain ice crystals or if they are still coldIbelow
40°F (4°C).
...Thawed ground meats, poultry or fish that have any offodor or off-color should not be refrozen and should not be
eaten. Thawed ice cream should be discarded. If the odor
or color of any food is poor or questionable, get rid of it.
The food may be dangerous to eat.
Even partial thawing and refreezing reduces the eating
quality of foods, particularly fruits, vegetables and prepared
foods. The eating quality of red meats is affected less than
that of many other foods. Use refrozen foods as soon as
possible to save as much of their quality as you can.
• Do not modify or extend the Power
It will cause electric shock or fire.
Cord length.

SAVE THESE INSTRUCTIONS

..
_

,,,..vt&-%.14.-,,.

BEFORE YOU THROW AWAY
YOUR OLD REFRIGERATOR
OR FREEZER

Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still
dangerous...even if they will sit for just a few days. If
you are getting rid of your old refrigerator, please follow
the instructions at right to help prevent accidents.

• Take off the doors.
• Leave the shelves in place so that
children may not easily climb inside.

Your old refrigerator may have a cooling system that used
CFCs (chlorofluorocarbons). CFCs are believed to harm
stratospheric ozone.

If you are throwing away your old refrigerator, make sure
the CFC refrigerant is removed for proper disposal by a
qualified servicer. If you intentionally release this CFC
refrigerant, you can be subject to fines and imprisonment
under provisions of environmental legislation.

IMPORTANT:

separate circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with a switch
or pull chain. Do not use an extension cord.

Please read carefully.

TO CONNECT

ELECTRICITY

Where a standard two-prong wall outlet is encountered,
it is your personal responsibility and obligation to have it
replaced with a properly grounded three-prong wall outlet.
Electrical Shock Hazard

Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord.

FOR PERSONAL SAFETY, this appliance must be
properly grounded. Have the wall outlet and the
circuit checked by a qualified electrician to make sure
the outlet is properly grounded.

NOTE: Before performing any type of installation,
cleaning, or removing a light bulb, turn the control
(Thermostat, Refrigerator Control or Freezer Control,
depending on the model) to OFF and then disconnect the
refrigerator from the electrical source. When you are
finished, reconnect the refrigerator to the electrical source
and reset the control (Thermostat, Refrigerator Control or
Freezer Control, depending on the model) to the desired
setting.

3;oPr°nngng
type

3-prong
grounding
plug

wall receptacle ___

RECOMMENDED

GROUNDING

USE OF EXTENSION

CORDS

Because of potential safety hazards under certain
conditions, we strongly recommend against the use of
an extension cord. However, if you still elect to use an
extension cord, it is absolutely necessary that it be a
UL-listed (USA), 3-wire grounding type appliance
extension cord having a grounding type plug and outlet,
and that the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.

METHOD

The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for
115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires. It is recommended that a

Use of an extension cord will increase the clearance
needed for the back of the refrigerator.

Use this page to become more familiar with the parts and features. Page references are included for your convenience.
NOTE: This guide covers several different models. The refrigerator you have purchased may have some
or all of the items listed below. The locations of the features shown below may not match your model.

Refrigerator Light (p.25)

_lce

Filter (Inside) (p.24)

_lPull

Modular Door Bins (p.21)

Durabase (p.23)

Shelves (p.18)

Divider (p.23)

Optibin Crisper (p.19)
(Keeps fruits and vegetable fresh and crisper)

Freezer Door Rack (Tilting-LRFD258 .... only) (p.23)

_Glide

N Serve (p.21)

Customcube Icemaker (p.27)

Bin (p.22)

_)Dairy

out Drawer (p.23)

Bin (p.22)

Egg Box (p.22)
OWine

Holder (p.18)

INSTALLATION

Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.

UNPACKING

YOUR REFRIGERATOR

Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warningtype labels, the model and serial number label, or the
TechSheet that is attached to back wall of the refrigerator.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
soap over the adhesive with your fingers. Wipe with warm
water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see the Important Safety Instructions
section.
Refrigerator shelves are installed in the shipping position.
Please reinstall shelves according to your individual
storage needs.

When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the floor. Always pull the refrigerator straight out
when moving it. Do not wiggle or walk the refrigerator
when trying to move it, as floor damage could occur.

Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion or fire.

1. To avoid vibration, the unit must be level. If required,
adjust the leveling screws to compensate for
unevenness of the floor. The front should be slightly
higher than the rear to aid in door closing. Leveling
screws can be turned easily by tipping the cabinet
slightly. Turn the leveling screws clockwise (.,L_) to
raise the unit, counterclockwise (_.,L) to lower it.
2. Install this appliance in an area where the temperature
is between 55°F (13°C) and 110°F (43°C.) If the
temperature around the appliance is too low or high,
cooling ability may be adversely affected.
3. Allow the clearance of at least 2 inch from the ceiling and 1
inch from the side walls for better cooling efficiency, ease of
installation, proper air circulation and electrical connections.
& CAUTION: Avoid placing the unit near heat sources,
direct sunlight or moisture.

NEXT
1. Clean your refrigerator thoroughly and wipe off all dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours before
putting food in it. Check the flow of cold air in the
freezer compartment to ensure proper cooling. Your
refrigerator is now ready for use.

WARNING
• Be careful when you work with hinge, base grille,
stopper etc. You may be injured.
• Do not put hands or foot or metal sticks into air vents,
base grille or bottom of refrigerator. You may be injured
or receive an electrical shock.

HOW TO REMOVE

DOOR HANDLES

To move refrigerator through a house door, it maybe necessary to remove the refrigerator door handles.
NOTE: Handle appearance may vary from
illustrations on this page.
1. Removing Refrigerator

Handle

• Grasp the handle tightly with both hands
and slide the handle up (1)(this may
require some force).
• The keyhole slots (2) on the back of the
handle allow the handle to separate from
the mounting screws (3).
& CAUTION: The handle could be
damaged if you hit it with a hammer
while removing or attaching.
& CAUTION: When you assemble or
disassemble handle, you must push or
pull with some force.

2. Removing Freezer Drawer Handle
• Press the handle against door first.
• Grasp the handle tightly with both hands
and slide the handle to right (1)(this may
require some force).

Keyhole slots
on back of
handle

Screws _
mounted (_)
on door

Screws

mounted (_)
on door

• The keyhole slots (2) on the back of the
handle allow the handle to separate from
the mounting screws (3).

Keyhole slots
on back of
handle

HOW TO REPLACE

DOOR HANDLES

NOTE: Handle appearance may vary from
illustrations on this page.
1. Replacing Refrigerator Door Handle
• Align keyhole slots (1) on the top and
bottom of the back of the handle with
the screws (2) mounted on the front of
the door.
• Press the handle against the door
front, making sure that the screws (2)
go into the keyhole slots (1).
• Holding the handle with both hands,
press it firmly against the front of the
door and slide the handle down (3).
mounted
on door

®
2. Replacing Freezer Drawer Handle

Screws
mounted
on door

• Align keyhole slots (4) on the right and
left sides of the back of the handle
with the screws (5) mounted on the
front of the drawer.
• Press the handle against the drawer
front, making sure that the screws (5)
go into the keyhole slots (4).
• Holding the handle with both hands,
press it firmly against the front of the
drawer and slide the handle to the left
(6).
Keyhole slots
on back of
handle
10

REMOVING

AND REPLACING

REFRIGERATOR

DOORS

1. Removing Refrigerator Door
A, CAUTION: Before you begin, unplug the refrigerator. Remove food and bins from doors.
• Left Door
1. Disconnect water supply tube by pushing back on the disconnect ring (4).
2. Open door. Loosen top hinge cover screw (1).
Use flat tip screwdriver to pry back hooks on front underside of cover (3). Lift up cover.
3. Disconnect door switch wire harness (2). Remove cover.
4. Attach the tube on the door with door.
5. Pull out the tube.
6.
7.
A,
8.
9.

Disconnect the three wire harnesses (5). Remove the grounding screw (6).
Rotate hinge lever (7) counterclockwise and remove. Lift top hinge (8) free of hinge lever latch (9).
CAUTION: When lifting hinge free of latch, be careful that door does not fall forward.
Lift door up from middle hinge pin (10) and remove door.
Place door, inside facing up, down onto a non-scratching surface.

• Right Door
1.
2.
3.
4.
_,
5.
6.

Open door. Loosen top hinge cover screw (1). Lift up cover (3).
Disconnect door switch wire harness (2). Remove cover.
Disconnect wire harness (5). Remove the grounding screw (6).
Rotate hinge lever (7) clockwise and remove. Lift top hinge (8) free of hinge lever latch (9).
CAUTION: When lifting hinge free of latch, be careful that door does not fall forward.
Lift door up from middle hinge pin (10) and remove door.
Place door, inside facing up, down onto a non-scratching surface.

2. Replacing Refrigerator

Door

• Right Door
1. Lower the door onto middle hinge pin (10).
2. Fit top hinge (8) over hinge lever latch (9) and into place. Insert hinge lever (7) under lever latch. Rotate lever
counterclockwise to secure hinge.
3. Install the grounding screw (6) and connect the three wire harnesses (5).
4. Connect door switch wire harness (2).
5. Hook tab on door switch side of cover under edge of wire opening in cabinet top. Position cover (3) into place. Insert
and tighten cover screw (1).
• Left Door
1. Lower the door onto middle hinge pin (10).
2. Fit top hinge (8) over hinge lever latch (9) and into place. Insert hinge lever (7) under lever latch. Rotate lever clockwise
to secure hinge.
3. Install the grounding screw (6) and connect the three wire harnesses (5).
4. Connect door switch wire harness (2).
5. Insert the water supply tube (4) into the connector tube until you see only one scale mark.
(Fully insert the tube over 5/8"(15mm)).
6. Hook tab on door switch side of cover (3) under edge of wire opening in cabinet top. Position cover into place. Insert
and tighten cover screw (1).

Incorrect

HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER

2. Installing

Pullout Drawer

• Pull both rails (1) out to full extension.

IMPORTANT: To avoid possible injury, product or property
damage, you will need two people to perform the following
instructions.

1. Removing Pullout Drawer

• Pull the drawer open to full extension. Remove the
lower basket (1) by lifting basket from rail system.

• Hook the door supports (2) into the rail tabs (3), as
illustrated, and lower the door into final position. And
tighten the screw (4).

• Remove the screw (2) from each side of rail system.

• With the drawer pulled out to full extension, insert the
lower basket (5) in the rail assembly until it doesn't
move forward.

• Lift the top of door to unhook door supports from rail
system. Lift door up to remove.

CAUTION: When you remove the drawer, do not hold
handle. If it comes off, it could cause personal injury.

_, WARNING: To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to
play inside of drawer.

CAUTION: When laying down the drawer, be careful
not to damage the floor or hurt your feet by the sharp
edges on hinge side.

WARNING:
13

DO NOT step or sit down on Freezer Door.

LEVELING

AND DOOR ALIGNMENT

3. Open both doors again and check to make sure that
they close easily. If not, tilt the refrigerator slightly more
to the rear by turning both leveling screws clockwise. It
may take several more turns, and you should turn both
leveling screws the same amount.

Leveling
Your refrigerator has two front leveling screws--one on
the right and one on the left. Adjust screws to alter tilt
from front-to-back or side-to-side. If your refrigerator
seems unsteady or you want the doors to close easier,
adjust the refrigerator's tilt using the instructions below:

4. Re-adjust if necessary.
5. Replace the base cover.
NOTE: Your new refrigerator is uniquely designed with
two fresh food doors. Either door can be opened or
closed independently of one another. You may have to
exert slight pressure on doors to get them to close
completely.

1. Plug the refrigerator's power cord into a 3-prong grounded
outlet. Move the refrigerator into its final position. Remove
the base cover.
To remove the base cover
1. Open the Freezer Drawer. (Drawer not shown for clarity.)
2. Once drawer is open there is sufficient clearance to
remove screws on top of cover.

Door Alignment

To replace base cover:
• Place cover into position and insert and tighten screws.

If the space between your doors is uneven, follow the
instructions below to align the doors:
1. With one hand, lift up the door you want to raise at
middle hinge.
2. With other hand, use pliers to insert snap ring as
shown.
3. Insert additional snap rings until the doors are aligned.
(Three snap rings are provided with unit.)

2. Turn the leveling screw clockwise to raise that side of
the refrigerator or counterclockwise to lower it. It may
take several turns of the leveling screw to adjust the tilt
of the refrigerator.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling screws.
This makes it easier to adjust the screws.

ENSURING

PROPER

AIR CIRCULATION

SETTING

In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, air enters at top of freezer and
circulates down. From bottom of freezer, air is forced up
to top of refrigerator. Air enters refrigerator through top
vent, then circulates and exists at bottom, where it returns
to freezer.

THE CONTROLS

• Your refrigerator has a control pad on the dispenser that
lets you regulate the temperature in the freezer and
refrigerator compartments.
• Initially set the REFRIGERATOR CONTROL at 37°F
(3°C) and the FREEZER CONTROL at O°F (-18°C).
Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature as
desired.

MULTI-FLOW
• Multi-Flow means powerful and effective cooling
operation. This is especially noticeable when new food
is placed in the refrigerator compartment.
• If water or foreign substances enter the cool air vent
while cleaning, efficiency will be lowered. In addition, if
gasket is damaged, efficiency may be lowered because
of escaping cool air.

EXPRESS FRZ

FREEZER

REFRIGERATOR

FILTER

LOCK

• Refrigerator Temp Control: 32°F/46°F (O°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment will become.
• Freezer Temp Control: -6°F/9°F (-21°C to -13°C)
When the setting is at a lower number, the freezer
compartment becomes colder. But the refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.
NOTE: If you want to change °F to °C, press and hold
COLDER key of freezer and COLDER key of refrigerator
over 3 sec at the same time. and if you want to change °C
to °F, hold them for 3 sec again.
NOTE: If you want to off display press and hold
EXPRESS FRZ key and FREEZER key over 3 sec at the
same time.
• Express Freezing : Press the EXPRESS FRZ button
and the LED will turn on. This function will remain
activated for 24 hours and increase the cooling speed of
the freezer and the amount of ice produced.

Do not block any of cool air vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.

• Dispenser Lock : Press and hold the LOCK button for 3
seconds to lock the dispenser.
When it is locked, the LED will be off and the dispenser
will not operate. To unlock, press and hold the LOCK
button for 3 seconds.

IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out of
food, wrap or cover foods tightly. (See the Food Storage
Guide section for details.)

• Filter Reset : When the FILTER RESET LED turns on,
you have to change the water filter. Press the FILTER
RESET button for 3 seconds to turn LED off. You need
to change the water filter approximately every 6 months.
WARNING:
work.
15

If a door is open, the dispenser does not

ADJUSTING

CONTROL

SETTINGS

FOOD STORAGE

Give the refrigerator time to cool down completely before
making final adjustments. It is best to wait 24 hours
before doing this. The mid-settings indicated in the
previous section should be correct for normal household
refrigerator usage. The controls are set correctly when
milk or juice is as cold as you like and when ice cream
is firm.

Wrap or store food in the refrigerator in airtight and
moisture-proof material unless otherwise noted. This
prevents food odor and taste transfer throughout the
refrigerator. For dated products, check date code to
ensure freshness.
Items

The refrigerator control functions as the thermostat for the
entire appliance (refrigerator and freezer sections). The
higher the number setting, the longer the compressor will
run to keep the temperature colder. The freezer control
adjusts the cold air flow from the freezer to the
refrigerator. Setting the freezer control to a lower
temperature keeps more cold air in the Freezer
compartment to make it colder.

Butter or
margarine

Cheese

If you need to adjust temperatures in the refrigerator or
freezer, start by adjusting the refrigerator. Then wait 24
hours before checking the freezer temperature. If it is too
warm or too cold, then adjust the freezer control.

RECOMMENDED
ADJUSTMENT:

• REFRIGERATOR section too
wa rm
- Door opened often
- Large amount of food added
- Room temperature very warm

Set REFRIGERATOR
control to next lower

• FREEZER section too
warm/ice not made fast

Set FREEZER control
to next lower number,
wait 24 hours, then recheck

enough
- Door opened often
- Large amount of food added
- Very cold room temperature
(can't cycle often enough)
- Heavy ice usage
- Air vents blocked by items

• REFRIGERATOR
cold

section too

How to
Keep opened butter in a covered
dish or closed compartment.
When storing an extra supply,
wrap in freezer packaging and
freeze.
Store in
you are
opened,
wrap or

the original wrapping until
ready to use it. Once
rewrap tightly in plastic
aluminum foil.

Milk

• Wipe milk cartons. For best
storage, place milk on interior
shelf, not on door shelf.

Eggs

• Store in original carton or Egg Box
on interior shelf, not on door shelf.

Fruit

• Wash, let dry, and store in
refrigerator in plastic bags or in
the crisper. Do not wash or hull
berries until you are ready to use
them. Sort and keep berries in
their original container in a
crisper, or store in a sloosely
closed paper bag on a refrigerator
shelf.

Leafy vegetables

• Remove store wrapping and trim
or tear off bruised and discolored
areas. Wash in cold water and

Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.

CONDITION/
REASON:

GUIDE

number, wait 24
hours, then re-check

drain. Place in plastic bag or
plastic container and store in
crisper.

Move items out of
airstream
Set REFRIGERATOR

Vegetables with
skins (carrots,
peppers)

• Place in plastic bags or plastic
container and store in crisper.

• Use fresh fish and shellfish the

- Controls not set correctly for
your conditions

control to next higher
number, wait 24
hours, then re-check

Fish

• FREEZER section too cold

Set FREEZER control

Leftovers

- Controls not set correctly for
your conditions

to next higher number,
wait 24 hours, then recheck

same day purchased.
Cover leftovers with plastic wrap
or aluminum foil. Plastic
containers with tight lids can also
be used.

STORING

FROZEN

REFRIGERATOR

FOOD

NOTE: For further information about preparing food for
freezing or food storage times, check a freezer guide or a
reliable cookbook.

WATER

SECTION

DISPENSER

Push up the dispenser switch with a glass until you hear
click to get cold water.

Packaging
Successful freezing depends on correct packaging. When
you close and seal the package, it must not allow air or
moisture in or out. If it does, you could have food odor
and taste transfer throughout the refrigerator and also dry
out frozen food.

Switch

Packaging recommendations:
Dispenser
tPush

• Rigid plastic containers with tight-fitting lids
• Straight-sided

canning/freezing

I
up

jars

• Heavy-duty aluminum foil
• Plastic-coated paper
• Non-permeable plastic wraps
• Specified freezer-grade

Tray can be easily removed by pressing and pulling it.

self-sealing plastic bags

Follow package or container instructions for proper
freezing methods.
Do not use:
• Bread wrappers
• Non-polyethylene

plastic containers

• Containers without tight lids
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable

wrap

A CAUTION: Do not keep beverage cans or plastic food
containers in the freezer compartment. They may be
break if it freezes.

Tilt up the front of tray slightly and snap the ribs into the
holes to replace the tray.

Freezing
Your freezer will not quick-freeze any large quantity of
food. Do not put more unfrozen food into the freezer than
will freeze within 24 hours (no more than 2 to 3 Ibs of food
per cubic foot of freezer space). Leave enough space in
the freezer for air to circulate around packages. Be careful
to leave enough room at
the front so the door can close tightly.

Ribs

Storage times will vary according to the quality and type
of food, the type of packaging or wrap used (airtight and
moisture-proof) and the storage temperature. Ice crystals
inside a sealed package are normal. This simply means
that moisture in the food and air inside the package have
condensed, creating ice crystals.
NOTE: Allow hot foods to cool at room temperature for
30 minutes, then package and freeze. Cooling hot foods
before freezing saves energy.

REFRIGERATOR

SHELVES

_, CAUTION: Make sure that shelves are level from one
side to the other. Failure to do so may result in the
shelf falling or spilling food.

The shelves in your refrigerator are adjustable to meet
your individual storage needs. Your model may have
glass or wire shelves.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier; it will also
reduce the amount of time the refrigerator door is open,
saving energy.

Sliding Out Shelves

IMPORTANT: Do not clean glass shelves with warm
water when they are cold. Shelves may break if exposed
to sudden temperature changes or impact, such as
bumping. For your protection, glass shelves are made
with tempered glass, which will shatter into small pebblesized pieces.

• To slide shelf in, push shelf in until it stops.

You can slide glass shelves in and out of your refrigerator
as follows.
• To slide the shelf out, carefully pull front of shelf
toward you.

NOTE: Glass shelves are heavy. Use special care when
removing them to avoid dropping them.
Adjusting

Shelves

Remove shelves from the shipping position and replace
shelves in the position you want.

WINE HOLDER

• To remove a shelf--Tilt up the front of the shelf in the
direction of (1) and lift it in the direction of (2). Pull the
shelf out.

Bottles can be stored laterally with this wine holder. It can
be attached to any shelf.

• To replace a shelf--Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired height.
Then lower the front of the shelf so that the hooks drop
into the slots.

Wine holder can be removed by pulling it straight out and
installed by placing it at the end of the shelf you want and
pushing it inward.

OPTIBIN

CRISPERS

• Crispers with rails
To remove crisper:
1. Pull drawer out to full extension.
2. Lift the front of basket up and pull straight out.

The Optibin Crispers provide fresher-tasting fruit and
vegetables by letting you easily control humidity inside the
crisper. The Optibin Crispers include: 1) a humidity control
knob at the front of the crisper cover and 2) a large lattice on
the inner surface of the cover to hold or release moisture.

CRISPER

HUMIDITY

To replace crisper:
1. Push rails to the back of the compartment.

CONTROL

You can control the amount of humidity in the moisturesealed crispers. Store vegetables or fruits requiring more
or less humidity in separate crispers. Adjust the control to
any setting between ._;:and _:.
• .:_ lets moist air out of the crisper for best storage of
fruits.
• ,_:: keeps moist air in the crisper for best storage of
fresh, leafy vegetables.

2. Insert the back corner of the basket into frame.

_, CAUTION: The glass shelf over the crisper is not firmly
secured. Be careful when tilting.

REMOVING

CRISPER

• Crispers without rails
1. To remove, pull drawer out to full extension.
2. Lift the front of the crisper, then pull straight out.
3. To install, slightly tilt up the front and insert drawer into
frame and push back into place.

3. Slightly tilt up the front and push back until it snaps into
place.

CRISPER COVER WITH LATTICE
SURFACE

To remove crisper door flap:
1. Raise the door flap as high as it will open.
2. Press the plastic hinge toward the center of the door
flap with your finger.
3. Lift the door out of its place.
4. To replace, reverse above procedure.

ON INNER

To remove the lattice on inner surface:

1. Remove crisper cover (as illustrated above).
2. Hold the glass cover and turn the crisper cover over.
3. For each lattice hold lattice and pull sides of the cover
outward to remove lattice.

To remove the glass:
1. Lift up the glass after inserting a finger into a hole
under the crisper cover.
2. Pull the glass up and out.

To replace lattice on inner surface:
1. For each lattice insert middle tab in 1 (closed to glass
cover)and pull sides of the cover to insert lattice.

GLIDE N SERVE
The Glide N Serve provides storage space with a variable
temperature control that keeps the compartment colder than
refrigerator temperature. The drawer also features a selfopening lid that opens whenever the drawer is pulled open.
This drawer can be used for large party trays, deli items,
or beverages.

Cold e..Temp

Control ..e Colder

NOTE: DO NOT store lettuce or other leafy produce in
this drawer.

Controls
The control regulates the air temperature in the drawer.
Set control level to cold to provide normal refrigerator
temperature. Use the colder setting for meats or other deli
items.
NOTE: Cold air directed to the Glide N Serve can
decrease refrigerator temperature. Refrigerator
control may need to be adjusted.

COLD

COLDER

•
•
•
•
•
•
•

•
•
•
•
•

cauliflower
cucumbers
zucchinis
apples
corn
oranges
grapes

steaks
hard cheeses
cold cuts
bacon
hot dogs

WARNING: Fruits and vegetables may be damaged at
the coldest setting.
CAUTION: DO NOT store bottles. If they are frozen,
they can be broken and cause personal injury.

To remove Glide N Serve:
-lilt up the front on it's closed position and pull straight out.

MODULAR

DOOR BIN

The door bins are removable for easy cleaning and
adjusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired support
button and )ush down until it stops.

WARNING: Somebody can be hurt if door bins are not
firmly assembled.

To replace Glide N Serve:
1. Push metal rails to the back of the refrigerator.

NOTE: DO NOT adjust a bin that is loaded with food.

2. Place drawer onto rails and slide drawer back until it
falls into place.

CAUTION: DO NOT allow children to play with
baskets. Sharp corners on baskets could cause injury.

DAIRY BIN

FREEZER SECTION

1. To remove the dairy bin, simply lift it and pull straight
out.

TILTING

DOOR

The tilting door provides easy access for stored foods.

2. To replace the dairy bin, slide it in above the desired
location and push down until it stops.

How to use:
Tilt the door down and pull it out.

EGG BOX
Store Egg Box on interior shelf, not on door shelf.
A CAUTION: Do not use the egg box as an ice storage
bin in the freezer compartment. The egg box can easily
break if it freezes.

_, WARNING: Be careful when you open tilting door so
that you do not injure your foot!

ICE BIN
1. To remove ice bin, pull it out as far as it comes.
Tilt up the front of the ice bin and pull straight out.
2. To install, insert ice bin into frame rails and push back
into place.

FREEZER WIRE DOOR RACK (LRFD25850** only)

DURABASE

DIVIDER

To remove basket
1. Pull one of the brackets upward.
2. Remove basket from both brackets.

The Durabase divider allows you to organize the
Durabase area into sections.

To replace basket
1. Insert bracket into one side. Hook end of basket into
bracket.
2. Hook other basket end into other bracket. Push bracket
down into place.
3. Be sure back of basket goes behind retention tab on
each bracket.

1. To remove, pull divider staight up.
2. To install, hook top corners of divider over top edge of
durabase.
_, WARNING: When the guide of the freezer drawer is
removed, children may crawl inside.

PULL

OUT

DRAWER

1. To remove, lift basket up and pull straight out.

DURABASE
1. To remove the Durabase, push it back to the end as
much as possible. Tilt up the front of the Durabase and
pull straight out.
2. To install, insert the Durabase in rail assembly.

2. To Install, pull both rails out to full extension.
Hook the basket supports into the rail tabs and push to
the back of compartment.

WATER

FILTER

2. Replace with a new cartridge.
Take the new cartridge out of its packaging and remove
protective cover from the o-rings.

It is recommended that you replace the filter when the
water filter indicator light turns on or your water dispenser
or ice maker performance decreases noticeably.

With cartridge knob in the vertical position, push the new
filter cartridge into the cover until it stops.

-....

After changing the water filter cartridge, reset the water
filter status display and indicator light by pressing and
holding the button for 3 seconds.
1. Remove the old cartridge.
If you are replacing the cartridge, first remove the old
one. Open the cartridge cover by pressing in on the tab
(1) at the front and pulling down (2).

If you can't turn the filter from side to side, it isn't fully
inserted. Push it in firmly and use its handle to twist the
cartridge clockwise about 1/4 turn. You will hear a snap
when it clicks into place.

Rotate the knob of the cartridge counter clockwise until it
clicks forward.
3. Flushing the Water System After Replacing Filter
Dispense water through the water dispenser for 3 minutes
to purge the system.

NOTE: To purchase replacement water filter cartridges,
visit your local appliance dealer or part distributor. You
can also visit our website : www.lgappliances.com or call
1-877-714-7481. The replacement water filter cartridge's
part number is 5231JA2006B.
Pull out the cartridge.

NOTE: There will be water in the cartridge. Some spilling
may occur.
24

CONDENSER

COILS

Remove base cover. (See the base cover section on page 14.)
Use a vacuum cleaner with an extended attachment to
clean condenser coils.
Vacuum coils when dusty or dirty. Coils may need to be
cleaned as often as every other month.
Replace base cover.

LIGHT
Explosion
Use non-flammable

Hazard

cleaner.

Failure to do so can result in death, explosion, or fire.

Electrical Shock Hazard
Before replacing a burned-out light bulb, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box.

Both the refrigerator and freefler sections defrost
automatically. However, clean both sections about once
a month to prevent odors. Wipe up spills immediately.

GENERAL

BULB REPLACEMENT

CLEANING

NOTE: Moving the control to the OFF position
does not remove power to the light circuit.

TIPS

• Unplug refrigerator or disconnect power.
• Remove all removable parts, such as shelves,
crispers, etc. Refer to sections in Using Your
Refrigerator for removal instructions.

NOTE: Not all appliance bulbs will fit your refrigerator. Be
sure to replace the bulb with one of the same size, shape
and wattage.

• Use a clean sponge or soft cloth and a mild detergent in
warm water. Do not use abrasive or harsh cleaners.

To change Refrigerator

Light Bulbs:

1. Unplug Refrigerator, or disconnect power at the circuit
breaker.

• Hand wash, rinse and dry all surfaces thoroughly.
• Plug in refrigerator or reconnect power.

2. If necessary, remove top shelf or shelves.

OUTSIDE

3. Using a flat instrument, gently pry the lamp cover loose in
the front as shown. Rotate downward to remove rear tabs.
4. Make sure the bulbs are cool to the touch.
Turn bulbs counterclockwise to remove. Insert new bulb(s).

Waxing external painted metal surfaces helps provide rust
protection. Do not wax plastic parts. Wax painted metal
surfaces at least twice a year using appliance wax (or
auto paste wax). Apply wax with a clean, soft cloth.

5. Assemble in reverse order by snapping the Lamp Cover
in, engaging the rear tabs followed by the front tabs.

For products with a stainless steel exterior, use a clean
sponge or soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners. Dry thoroughly
with a soft cloth.

INSIDE WALLS (allow freezer to warm up so
cloth won't stick)
To help remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm water.
Mix 2 tablespoons baking soda to 1 quart of water (26 g
soda to 1 liter water.) Be sure the baking soda is
completely dissolved so does it not scratch the surfaces
of the refrigerator.
& CAUTION: While cleaning the inside, do not spray water.

DOOR LINERS

AND GASKETS

Do not use cleaning waxes, concentrated detergents,
bleaches, or cleaners containing petroleum on plastic
refrigerator parts.

PLASTIC

PARTS (covers

and panels)

Do not use window sprays, abrasive cleansers, or flammable
fluids. These can scratch or damage the material.

Tochangefreezerlight:

WHEN YOU GO ON VACATION

1. Unplug refrigerator power cord form outlet.

If you choose to leave the refrigerator on while you
are away, follow these steps to prepare your refrigerator
before you leave.

2. Pull light bulb cover down to remove.
3. Remove old bulb. Replace with 60-watt appliance bulb.

1. Use up any perishables and freeze other items.

4. Insert tabs on back of cover into slots in freezer ceiling.
Push cover up to snap front into place.

2. Empty the ice bin.
If you choose to turn the refrigerator
leave, follow these steps.

off before you

1. Remove all food from the refrigerator.
2. Depending on your model, set the thermostat control
(refrigerator control) to OFR See the Setting the
Controls section.
3. Clean refrigerator, wipe it and dry well.
4. Tape rubber or wood blocks to the tops of both doors to
prop them open far enough for air to get in. This stops
odor and mold from building up.
_, CAUTION: DO NOT place fingers inside of cover.
Lamp may be hot.

POWER

WHEN YOU MOVE
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.

INTERRUPTIONS

1. Remove all food from the refrigerator and pack all
frozen food in dry ice.

If the electricity goes off, call the power company and ask
how long it will be off.

2. Depending on your model, turn the thermostat control
(refrigerator control) to OFF. See the Setting the
Controls section.

1. If the power will be out for 24 hours or less, keep
both refrigerator doors closed to help foods stay
cold and frozen.

3. Unplug the refrigerator.
2. If the power will be out for more than 24 hours:
4. Clean, wipe and dry thoroughly.
a) Remove all frozen food and store it in a frozen
food locker.

5. Take out all removable parts, wrap them well and tape
them together so they don't shift and rattle during the
move. Refer to sections in Using your Refrigerator for
removable instructions.
6. Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they don't scrape the floor.
See the Door Closing section.
7. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back
and refer to the Installing Your Refrigerator section for
preparation instructions.
WARNING: DO NOT get alive animals into a
refrigerator.

NOTE: If the cube size is smaller or larger than you
expected, you can regulate the size with the cube size
button.
Personal Injury Hazard

Every time you press the cube size button, the indicator
moves up on light. The higher the light position, the larger
the cubes will be. Pressing at highest position returns
indicator to lowest position.

Avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
the cubes. DO NOT place fingers or hands on the
automatic icemaking mechanism while the refrigerator
is plugged in.

OPERATION

WHEN YOU SHOULD SET THE ICEMAKER
POWER SWITCH TO O (OFF)
• When the water supply will be shut off for several hours.

INSTRUCTIONS

• When the ice storage bin is removed for more than a
minute or two.

A newly-installed
refrigerator
may take
12 to 24 hours to begin making ice.

• When the refrigerator will not be used for several days.

NORMAL
Icemaker

SOUNDS

YOU MAY HEAR

The icemaker water valve will buzz as the icemaker fills
with water. If the power switch is in the I (on) position, it
will buzz even if it has not yet been hooked up to water.
To stop the buzzing, move the power switch to O (off).

NOTE: Keeping the power switch in the I (on) position
before the water line is connected can damage the
icemaker.
Feeler Arm
Cube Size
Indicator Light

You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.

Cube Size
Select Button

PREPARING

FOR VACATION

Set the icemaker power switch to O (off) and shut off the
water supply to the refrigerator.

The icemaker will produce eight cubes per cycle-approximately 100-130 cubes in a 24-hour period,
depending on freezer compartment temperature, room
temperature, number of door openings and other
operating conditions.

If the ambient temperature will drop below freezing, have
a qualified servicer drain the water supply system to
prevent serious property damage due to flooding from
ruptured water lines or connections.

If the refrigerator is used before the water connection is
made to the icemaker, set the power switch to O (off).
When the refrigerator has been connected to the water
supply, set the power switch to I (on).
The icemaker will fill with water when it cools to freezing.
A newly-installed refrigerator may take 12 to 24 hours to
begin making ice cubes.
Throw away the first few batches of ice to allow the water
line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the level of the feeler arm, the
icemaker will stop producing ice.
It is normal for several cubes to be stuck together.
If ice is not used frequently, old ice cubes will become
cloudy, taste stale, and shrink.
27

BEFORE

Two 1/4" outer diameter

YOU BEGIN

compression nuts and
2 ferrules (sleeves) to
connect the copper tubing to
the shutoff valve and the
refrigerator water valve.

This water line installation is not warranted by the
refrigerator or icemaker manufacturer. Follow these
instructions carefully to minimize the risk of expensive
water damage.
Water hammer (water banging in the pipes) in house
plumbing can cause damage to refrigerator parts and lead
to water leakage or flooding. Call a qualified plumber to
correct water hammer before installing the water supply
line to the refrigerator.

• If your existing copper water
line has a flared fitting at the
end, you will need an
adapter (available at
plumbing supply stores) to
connect the water line to the refrigerator OR you can
cut off the flared fitting with a tube cutter and then use
a compression fitting.

To prevent burns and product damage, do not hook up
the water line to the hot water line.
If you use your refrigerator before connecting the water
line, make sure the icemaker power switch is in the O
(off) position.

• Shutoff valve to connect to
the cold water line. The
shutoff valve should have a
water inlet with a minimum
inside diameter of 5/32" at
the point of connection to the
COLD WATER LINE. Saddle-type shutoff valves are
included in many water supply kits. Before purchasing,
make sure a saddle-type valve complies with your local
plumbing codes.

Do not install the icemaker tubing in areas where
temperatures fall below freezing.
When using any electrical device (such as a power
drill) during installation, be sure the device is doubleinsulated or grounded in a manner to prevent the hazard
of electric shock, or is battery-powered.
All installations must be in accordance with local plumbing
code requirements.
NOTE: Wear eye protection.

INSTALLATION

INSTRUCTIONS

Install the shutoff valve on the nearest frequently used
drinking water line.

WHAT YOU WILL NEED
• Copper Tubing, 1/4" outer
diameter to connect the refrigerator
to the water supply. Be sure both
ends of the tubing are cut square.

SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the pressure on
the line.

To determine how much tubing you need: measure
the distance from the water valve on the back of the
refrigerator to the water supply pipe. Then add 8 feet
(2.4 m). Be sure there is sufficient extra tubing (about 8 feet
[2.4 m] coiled into 3 turns of about 10" [25 cm] diameter) to
allow the refrigerator to move out from the wall after
installation.

CHOOSETHE VALVELOCATION
Choose a location for the valve
that is easily accessible. It is best
to connect into the side of a
vertical water pipe. When it is
necessary to connect into a
horizontal water pipe, make the
connection to the top or side,
rather than at the bottom, to avoid
drawing off any sediment from the water pipe.

• A cold water supply. The water pressure must be
between 20 and 120 p.s.i, on models without a water
filter and between 40 and 120 p.s.i, on models with a
water filter.
• Power drill.

DRILLTHEHOLEFORTHEVALVE

• 1/2" or adjustable
wrench.

Drill a 1/4" hole in the water
pipe (even if using a selfpiercing valve) using a
sharp bit. Remove any burrs
resulting from drilling the
hole in the pipe. Take care
not to allow water to drain
into the drill. Failure to drill a 1/4" hole may result in
reduced ice production or smaller cubes.

• Straight- and Phillipsblade screwdriver.

INSTALLATION
(CONTINUED)
4.

FASTEN

INSTRUCTIONS

THE SHUTOFF

7. CONNECT

THE TUBING

TO THE VALVE

Place the compression nut and ferrule (sleeve)
for copper tubing onto the end of the tubing and
connect it to the shutoff valve. Make sure the tubing is
fully inserted into the valve. Tighten the compression
nut securely.

VALVE

Fasten the shutoff valve to the cold water pipe with
the pipe clamp.
Pipe Clamp

Saddle-Type
Shutoff Valve

Compression
,_.

Packing_
Saddle-Type --;_
Shutoff Valve

Nut

Vertical Cold
Water Pipe

NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.

THE PIPE CLAMP

NOTE: Do not overtighten or you may crush

Shut the water off at the water
valve after about one quart of
water has been flushed through
the tubing.

the tubing.

End

Pipe Clamp

-Washer
Clamp Screw_

FLUSH OUT THE TUBING
Turn the main water supply on
and flush out the tubing until the
water is clear.

Tighten the clamp screws until the sealing washer
begins to swell.

_lnlet

(sleeve)

Outlet
Valve

NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.

5. TIGHTEN

_rule

ROUTE THE TUBING
Route the tubing between the cold water line and the
refrigerator.
Route the tubing through a hole drilled in the wall or
floor (behind the refrigerator or adjacent base cabinet)
as close to the wall as possible.
NOTE: Be sure there is sufficient extra tubing (about
8 feet coiled into 3 turns of about 10" diameter) to
allow the refrigerator to move out from the wall after
installation.

CONNECT THE TUBING
REFRIGERATOR

4. Insert the tube into the valve and fasten with wrench
as shown in the figure below.

TO THE

Removing and Replacing Valve Cover
NOTE:
• Before making the connection to the refrigerator, be
sure the refrigerator power cord is not plugged into
the wall outlet.
1. Loosen screw on top of plastic cover.

A CAUTION: Check to see if water dripping occurs at
water line connections.

5. Bend the tube upwards and fasten it into the clamp
provided to hold it in position. Replace the cover
and tighten the cover screw.
Tubing
Clamp

2. Lift off the cover by slightly pushing up.

3. Place a compression nut and a ferrule(sleeve)
the end of tubing.

Compression

onto

Nut

Ferrule (sleeve)

10.TURN THE WATER ON AT THE
SHUTOFF VALVE
Tighten any connections that leak.
Reattach the compressor compartment

11.PLUG

access cover.

IN THE REFRIGERATOR

Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the wall.
Push the refrigerator back to the wall.

12. START THE ICEMAKER
Set the icemaker power switch to the ON position.
The icemaker will not begin to operate until it reaches
its operating temperature of 15°F (-9°C) or below. It
will then begin operation automatically if the icemaker
power switch is in the I (on) position.

UNDERSTANDING

SOUNDS

• The defrost timer will click when the automatic defrost

YOU MAY HEAR

cycle begins and ends. The thermostat control (or
refrigerator control, depending on the model) will also
click when cycling on and off.

Your new refrigerator may make sounds that your old one
didn't make. Because the sounds are new to you, you
might be concerned about them. Most of the new sounds
are normal. Hard surfaces, like the floor, walls and
cabinets, can make the sounds seem louder than they
actually are. The following describes the kinds of sounds
and what may be making them.

• Rattling noises may come from the flow of refrigerant, the
water line, or items stored on top of the refrigerator.
• Your refrigerator is designed to run more efficiently
to keep your food items at the desired temperature.
The high efficiency compressor may cause your new
refrigerator to run longer than your old one, and
you may hear a pulsating or high-pitched sound.
You may hear the evaporator fan motor circulating the air
through the refrigerator and freezer compartments.
• As each cycle ends, you may hear a gurgling sound due
to the refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may cause
a popping noise.
• Water dripping on the defrost heater during a defrost
cycle may cause a sizzling sound.
You may hear air being forced over the condenser by the
condenser fan.
You may hear water running into the drain pan during the
defrost cycle.

REFRIGERATOR
DOES NOT
OPERATE

Check if...

Then...

The power supply cord is unplugged.

• Firmly plug the cord into a live outlet with
proper voltage.

A household fuse has blown or circuit breaker
tripped.

• Replace the fuse or reset the circuit breaker.

The refrigerator control is set to the OFF
position.

• Refer to the Setting the Controls section
on page 15.
• Wait about 30 minutes for defrost cycle to
end.

Refrigerator is in the defrost cycle.

VIBRATION OR
RATTLING NOISE

The refrigerator is not resting solidly on the
floor.

• Floor is weak or uneven or leveling legs
need adjusting.
See Installation section on page 8.

LIGHTS DO NOT
WORK

The power supply cord is unplugged.

• Firmly plug the cord into a live outlet with
proper voltage.

Light bulb is loose in the socket.

• Turn the refrigerator control to the OFF
position and unplug the refrigerator. Gently
remove the bulb and reinsert. Then plug in
refrigerator and reset the refrigerator control.
• Replace with an appliance bulb of the same
wattage, sizeand shape available at your
local hardware store. (See the Changing
the Light Bulb(s) section on pages 25-26.)
Turn the temperature control to the OFF
position and unplug the refrigerator prior to
replacement.

Light bulb has burned out.

COMPRESSOR
MOTOR SEEMS
TO RUN TOO
MUCH

Check if...

Then...

The refrigerator that was replaced was an
older model.

• Modern refrigerators with more storage
space require more operating time.

The room temperature is hotter than normal.

• The motor will run longer under warm
conditions. At normal room temperatures,
expect your motor to run about 40% to 80%
of the time. Under warmer conditions,
expect it to run even more often.

The door is opened often or a large amount of
food has just been added.

• Adding food and opening the door warms
the refrigerator.
It is normal for the refrigerator to run longer
in order to cool the refrigerator back down.
Adding a large amount of food warms the
refrigerator. See the Food Storage Guide
section on page 16. In order to conserve
energy, try to get everything you need out of
the refrigerator at once, keep food organized
so it is easy to find and close the door as
soon as the food is removed.

The refrigerator was recently plugged in and
the refrigerator control was set correctly.

• The refrigerator will take up to 24 hours to
cool completely.

The refrigerator control is not set correctly for
the surrounding conditions.

• See the Adjusting Control Settings section
on page 16.
• Push the doors firmly shut. If they will not
shut all the way, see Doors will not close
completely below.

The doors are not closed completely.

DOORS WILL
NOT CLOSE
COMPLETELY

FROST OR ICE
CRYSTALS ON
FROZEN FOOD

The condenser coils are dirty.

• This prevents air transfer and makes the
motor work harder.
Clean the condenser coils. Refer to the
Care and Cleaning section on pages
25-26.

The refrigerator is not level.

• See Leveling and Door Alignment on
page 14.
• Rearrange food containers to clear door and
door shelves.

Food packages are blocking the door open.
The ice bin, crisper cover, pans, shelves, door
bins or baskets are out of position.

• Push bins all the way in and put crisper
cover, pans, shelves and baskets into their
correct positions. See the Using Your
Refrigerator section on pages 15-24.

The gaskets are sticking.

• Clean gaskets and the surface that they
touch. Rub a thin coat of paraffin wax on the
gaskets after cleaning.

The refrigerator wobbles or seems unstable.

• Level the refrigerator. Refer to the Leveling
and Door Alignment section on page 14.

The doors were removed during product
installation and not properly replaced.

• Remove and replace the doors according to
the Removing and Replacing Refrigerator
handles and doors section on pages 9-13,
or call a qualified service technician.

The door is not closing properly.

• See Doors will not close completely above.

The door is opened often.

• When the door is opened, warm, humid air
is allowed in the freezer, resulting in frost.
33

Check if...

Then...

The icemaker was recently installed.

• Discard first few batches of ice to avoid
discolored or off-flavored ice.

The ice has been stored for too long.

• Throw away old ice and make new supply.

The food has not been wrapped tightly in
either compartment.

• Rewrap foods since odors may migrate to

The water supply contains minerals such as
sulfur.

• A filter may need to be installed (or
replaced) to eliminate taste and odor
problems.

The interior of refrigerator needs cleaning.

• See Care and Cleaning
25-26.

Ice storage bin needs cleaning.

• Empty and wash bin. Discard old cubes.

THERE IS
WATER IN THE
DEFROST DRAIN
PAN

The refrigerator is defrosting.

• The water will evaporate. It is normal for
water to drip into the defrost pan.

It is more humid than normal.

• Expect that the water in the defrost pan will
take longer to evaporate. This is normal
when it is hot or humid.

THE
REFRIGERATOR
SEEMS TO
MAKE TOO
MUCH NOISE

The sounds may be normal for your
refrigerator.

• Refer to the Understanding Sounds You
May Hear section on page 32.

THE ICEMAKER
IS NOT
PRODUCING ICE
OR ICE CUBES
ARE FREEZING
TOO SLOWLY

The freezer temperature is cold enough to
produce ice.

• Wait 24 hours after hook-up for ice
production. See the Setting the Controls
section on page 15.

Door left open.

• Check to see if something is holding the
door open.

CUBES
PRODUCED BY
ICEMAKER ARE
TOO SMALL

Smaller cube size level is selected.

• Select larger cube size using cube size
selector.

Water shutoff valve connecting refrigerator to
water line may be clogged.

• Call a plumber to clear the valve.

ICE HAS OFFTASTE OR ODOR

THE DOORS ARE
DIFFICULT TO
OPEN

the ice if food is not wrapped properly.

section on pages

The gaskets are dirty or sticky.

Clean gaskets and the surfaces that they
touch. Rub a thin coat of appliance polish or
kitchen wax on the gaskets after cleaning.

The door is reopened within a short time after
having been opened.

When you open the door, warmer air enters
the refrigerator. As the warm air cools, it can
create a vacuum. If the door is hard to open,
wait 5 minutes to allow the air pressure to
equalize, then see if it opens more easily.

TEMPERATURE
IS TOO WARM
OR THERE IS
INTERIOR
MOISTURE
BUILDUP

Check if...

Then...

The air vents are blocked. Cold air circulates
from the freezer to the fresh food section and
back again through air vents in the wall
dividing the two sections.

• Locate air vents by using your hand to
sense airflow and move all packages that
block vents and restrict airflow. Refer to
Multi-Flow on page 15 for the location of air
vents.

The doors are opened often.

• When the door is opened, warm humid air is
allowed into the refrigerator. The more the
door is opened, the faster the humidity
builds up, and the more warm air the
refrigerator must cool. In order to keep the
refrigerator cool, try to get everything you
need out of the refrigerator at once, keep
food organized so it is easy to find and close
the door as soon as the food is removed.

The control is not set correctly for the
surrounding conditions.

• Refer to the Setting the Controls section
on page 15.
Wait 24 hours for temperatures to stabilize
or even out. If the temperature is too cold or
too warm, move the dial one number at a
time.

A large amount of food has just been added to
the refrigerator or freezer.

• Adding food warms the refrigerator. It can
take a few hours for the refrigerator to return
to normal temperature.

The food is not packaged correctly.

• Wrap food tightly and wipe off damp
containers prior to storing in the refrigerator
to avoid moisture accumulation. If
necessary, repackage food according to the
guidelines in the Food Storage Guide
section on page 16.

The doors are not closing completely.

• See Doors will not close completely on
page 33.
• In humid weather, air carries moisture into
refrigerator when doors are opened.
• It is normal for droplets to form on the back
wall after the refrigerator self-defrosts.

The weather is humid.
A self-defrost cycle was completed.

_ics

IHG=

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 36
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Wed Apr 04 18:32:33 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

LG LRFD21855ST User Manual REFRIGERATOR Manuals And Guides L0521420

LG Bottom Mount Refrigerator Manual L0521420 LG Bottom Mount Refrigerator Owner's Manual, LG Bottom Mount Refrigerator installation guides

LRFD25850 L0521420

Navigation menu

Versions of this User Manual:

Views

Navigation