LG SH3K User Manual Guide LAS464B.DUSALLB MFL69596802

SH3K User Guide LAS464B.DUSALLB_MFL69596802; Describes product usage and instructions. (English)

User Manual: LG SH3K User Guide Describes product usage and instructions. (English)

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
FCC Compliance Statement

yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment and
the receiver.
yy Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
yy Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device. Any changes or modifications
in construction of this device which are not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

ENGLISH

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:

FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific
operating instructions for satisfying RF exposure
compliance.
FCC Radio Frequency Interference Requirements :
High power radars are allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can
cause interference with and/or damage this device. This device
cannot be co-located with any other transmitter.

Responsible Party :
LG Electronics USA, Inc.
1000 Sylvan Ave
Englewood Cliffs, NJ 07632
Tel: 1-800-243-0000

SIMPLE MANUAL

Wireless
Sound Bar

To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
LG Customer Information Center
1-800-243-0000
1-888-865-3026

MODELS
LAS465B

USA, Consumer
USA, Commercial

Register your product Online!

SH3K

*MFL69596802*

www.lg.com

Printed in China

www.lg.com

Front Panel

1

Subwoofer Connection

Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of wireless
subwoofer to the outlet.

 ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  · Standby /On
 ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  · Selects Function
 ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  · Adjusts Volume

Rear Panel

TV Connection

TV

yy Press and hold PAIRING button for 5 seconds.
yy The LED lights up alternately in red and
yellow - green.

When the reset is completed, the subwoofer's
yellow - green LED blinks rapidly.

WOOFER LEVEL +/-: Adjusts the volume level of subwoofer.

Addtional Device Connection
a Connect to the external device as follows.

yy The red LED on the sound bar blinks rapidly.
yy Turn the sound bar’s power off and on while the
subwoofer’s yellow - green LED blinks.
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer
away from the following (ex. wireless router,
microwave oven, etc.) over 1m (3.3 ft) to
prevent wireless interference.

!P

AUTO POWER ON/OFF: Automatically turns on by an input
source.

Replacement of battery

(Set-top
Box, Player
etc.)

TV

b Reset the sound bar
yy Adjust volume to minimum until the red LED on
the sound bar lights up for a while.
yy Press and hold (Mute) button on the remote
control for 3 seconds.

STANDARD/VOICE/CINEMA : Selects sound effect.
DRC ON/OFF: Makes comfortable sound at Dolby Digital.

Subwoofer Connection Manually
a Reset the Subwoofer
If the yellow - green LED on the subwoofer
blinks rapidly, skip this step and go to b

Remote control

a Connect the the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.

b Turn on the sound bar :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
yellow - green LED turns on.

yy Unplug the power cord. After the LED turns off
completely, plug in the power cord again.
PORT. IN  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  · Connect to a Portable device
OPTICAL IN  ·  ·  ·  ·  ·  ·  ·  ·  ·  · Connect to an Optical device

2

Additional Information
b Set the input source by pressing F on the
remote control or unit repeatedly.

Specification
Power
requirements

Refer to the main label.
Refer to the main label.

Power
consumption
Dimensions
(W x H x D)
Net Weight
Amplifier
(Total RMS
Output power)

Networked standby : 0.5 W
(If all network ports are
activated.)
Approx.
950 mm x 71 mm x 47 mm
(37.4 inch x 2.8 inch x 1.9 inch)
Approx. 2.47 kg (5.4 lb)
300 W

Design and specifications are subject to change
without notice.

How to disconnect the wireless network
connection or the wireless device

Set up the AUTO POWER ON/OFF function to off and
turn off the unit.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2016:07:04 09:56:16+09:00
Metadata Date                   : 2016:07:04 09:56:20+09:00
Modify Date                     : 2016:07:04 09:56:20+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:65a5bcb0-5e0e-4a97-b63a-172308f412f2
Original Document ID            : xmp.did:DEB1765B50C9E4118190E53DAF7628D5
Document ID                     : xmp.id:688A4E058241E6119A56CAA7C5D5FCBE
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:678A4E058241E6119A56CAA7C5D5FCBE
Derived From Document ID        : xmp.did:BD3E54D03229E6118C40909857D2B747
Derived From Original Document ID: xmp.did:DEB1765B50C9E4118190E53DAF7628D5
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:07:04 09:56:16+09:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools