LIAN LI BORA120R Controller User Manual G50 120000 0001

LIAN LI INDUSTRIAL CO.,LTD. Controller G50 120000 0001

Users Manual

Press and hold for 5 seconds to disconnect 1 to 1 pair up. It will also reset all setting. (Only for RF version).Press and hold for 5 seconds to disconnect 1 to 1 pair up.(Only for RF version)長按 5 秒恢復所有遙控器通用( 只針對RF版本有效 )，解除一對一匹配，長按5秒(只針對RF版本有效)，解除一對一匹配售控制器使用指南Press Off to save setting按 Off 保存1. 按 Off 。2. 按 AUTO ，風扇會跳出三個燈顏色。3. 按藍色鍵，調整燈顏色的順序，直到三個燈 顏色順序為紅、綠、藍為止。4. 按 Off 保存。5. 按 On，再按各顏色鍵， 顯示各顏色鍵的顏色。 1. Press Off .2. Press AUTO, the fan will the three colors.3. Press the blue button to adjust the order of the colors until the three LEDs 4. 5. promptLEDLEDsequence is in Red, Green and Blue. Press Off to save setting.Press On, then press the color button to display the color of the color button.BGR綠紅藍OnAUTOOffIncrease brightnessSpeed upDecrease brightnessSlow downChange to next light effectGo back to previous light effectTo set single color directlyPress Off button and then this button in order to enter menu mode. In menu mode, press M+ and M- to set number of addressable LEDs; press blue button to change RGB sequence. Press Off to save and exit.Press once to run all light effect Turn Off LEDsTurn on or pause按 Off 後再按此鍵進入設置菜單按M+ 和 M-來調節LED點數，按藍色鍵可以調節RGB 順序，設置完成按 Off 保存退出。，這時可以關機亮度+亮度-按一下為自動播放所有模式開機/播放暫停速度+速度 -靜態單色按下顯示對應顏色，快捷按鈕模式+模式 -Controller User’s GuidePlease install fan according to Fan numbering sequence (1, 2, 3), otherwise the LED will not function. Fan output 4, 5 and 6 have the same pattern as Fan output 1, 2, and 3.請按 1、2 3 順序插上，要不然 LED 不亮1、2、3 一樣。、 ，4、5、6 的功能跟 主型號 (Model Name):BORA120R-1FCC ID: 2ANYX-BORA120R Magnell Associate, Inc. dba Newegg. com 17560 Rowland St, City of Industry, CA 91748, USA Tel: 626. 271.1420 Distributor:
Magnell Associate, Inc. dba Newegg. com 17560 Rowland St, City of Industry, CA 91748, USA Tel: 626. 271.1420 Distributor:FCC WARNINGThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.FCC ID: 2ANYX-BORA120R控制器使用指南Controller User’s GuideG50.120000.0001

Navigation menu