LINKSYS HGA7S-2 Wireless-G Ethernet Bridge with 5-Port Switch User Manual scan

Download:
Mirror Download [FCC.gov]
Document ID	445364
Application ID	2zhTsNDcFTiBTxyXadUWbw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	204.55kB (2556843 bits)
Date Submitted	2004-06-30 00:00:00
Date Available	2004-06-29 00:00:00
Creation Date	2004-06-30 15:41:02
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-06-30 15:41:02
Document Title	scan
Document Creator	PScript5.dll Version 5.2
Document Author:	midoli2

I INKEYE®
A Division uf Cisco Systems, Inc.
gig
Ethernet Bridge
Wireless with 5-Port Switch Quick Installation
CISCD Smws
WET54GSE
Comes? The WireleséaG ETherneT
Bridge for Setup
ATTach The deTachable
dnTenna.
Plug The included ETherneT
neTwork cable lnTo one of The l
LAN ports on The back panel of
The Bridge.
Plug The oTher end of The
ETherneT neTwork coble inTo The
RJ—45 porT of d hub, swiTch, or
rouTer on your wired neTwork.
Plug The supplied power
adopTer inTo The Power porT on
The side panel of The Bridge.
Then plug The oTher end inTo
an elecTrical ouTIeT.
- Llnksyergh Gain Amennafcr SMA CanneaoMHGMs 1
Also Available: 1
Set upthe Wireless»8 7
Ethernet Bridge
A Insert The Setup CD—ROM into
your PC’s CD»ROM drive. The ,
Setup Utility should run
automatically, and The
Welcome screen should
appear. If it does not appear, i
click the Start button and ’
choose Run. In The field that
appears, enter D:\setup.exe (if
“D” is The letter of your CD-ROM
drive).
B Click Setup to begin the setup
process. ‘
C Make sure the Bridge is
correctly connected to your
wired network. Click Next.
D The screen displays a list of
Vlfireless-G EThemeT Bridges on 1
your network, along with their i
status informatron. Select The ' mmmmmmwm
Bridge you are currently tahzmmumrmm
hm‘Mm-Wlmmtmfiww
installing by clicking its name in
The Selection box. Click Yes.
E A Password screen will appear.
In lowercase letters, enter
admin in The Password field.
Then click Enter.
The Mode Settings screen will
appear. Select Infrastructure if
you want your wireless
computers to communicate
with computers on your wired
network using a wireless access
point, Select Ad-Hoc if you
want wireless computers to
communicate directly with
each other.
in the WB Name field, enter a
unique name for the Bridge.
Click Next.
On the Wireless Settings
screen, enter your wireless
network’s SSlD. If you chose Ad-
Hoc mode, select the channel
that your network uses.
If you have Wireless—G
[802.1 lg) and Wireless-B
[802.i lb) devices in your
network, then keep the default
Network Mode setting, Mixed.
If you have only WirelessG
devices, select G-Only. Then
click Next.
The IP Settings screen will
appear. if your network has a
DHCP server, select
Automatically obtain an IP
address (DHCP). Click Next
and proceed to step i.
If your network does not have a
DHCP server. select Set lP
configuration manually. Enter
mm, m. set-n!
mum-hum mime-m
mun-«m ‘ .
s “Maw“..mmnwww
“- m mum Wm
M ”nu-mwhwhnlm
mm Rx-nwk- cum-Mm >.
£53“ 1. “mm-4» m i
601t»06360011 (L)
an lP Address, lP Mask [also
known as Subnet Mask], and
Gateway You must specify an IP
address. If you are unsure about
The lP Mask and Gateway, leave
the default settings. Click Next
and proceed to step I.
The Security Settings screen will
appear. Choose from WEP or
WPA PSK. if your network has WEP
encryption enabled, Then select
The level of WEP encryption,
and enter a Passphrase. The
WEP key will be automatically
generated. If you want to
manually enter the WEP key,
leave The Passphrase field blank
and enter the WEP key in the Key
1 field. If your network has WEP
encryption disabled, keep the
default, Disabled. Then click
Next.
it your network has WPA PSK
enabled, then select WPA PSK
from the drop—down menu.
Select TKIP for the algorithm,
then enter a Pre—Shared Key of
8-32 characters. Click Next.
Review your settings on the
Confirmation screen. Write
down the Bridge‘s lP Address if
you want to access the Bridge’s
Web-based Utility. Click Yes to
save these settings.
On the Congratulations screen,
click Exit.
mm. A mwmw—nmxmm
“my" ‘ human-mm ....-..
5...“ ......-~..,: -. i.
um—
Erma» ._u_mws.-q mm:
mum-mun ”Us
$7..~-- um“...
u.-
(A “swim—M-
r-——~ trans-um m-... m. m»
an...“ mam-m..."
1»: mm
my
a...“
'€aiaaaf¢r shaayefésae mafia?
Bfiafige fer hieiwefk the
A After configuration, unplug the
power adopter from the
electrical outlet, and unplug
the Ethernet network cable
from the hub, switch, or router.
B Plug the Ethernet network
cable into the RJ-45 port on
the Ethernet-ready network
device you wish to add to the
wireless network.
C Plug the power adapter into 0
local electrical outlet.
Congratulations! The installation of
the Wireless-G Ethernet Bridge
is complete.
basic settings or make advanced mortg-
uraiion changes, use your web browser
and the Mistress-G Ethernet Bridge
Web-based Utility
Open your web browser, and enter the W
E address of the Wireless—G Ethernet
i Bridge (the defaoh 1? address rs
r 192.168.1226). Reformtlte ilser Guide
(mtg: it you would like to change these g
on the Setup GD-RflM. é
Linksys is a registered trademark or trademark of
Gisoo systems, Inc, and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisoo Systems. inc. All rights reserved.
WET54GSS-QI-40329NC BW
Fedem Cnmmumcafian unmissm lnmmenca Slainmafll
This sompment has nun wed and mm m comply mm m, imrrs fur a Class a mm mm, m "51mm! in Dnn15 bflhe rcc Rules mm mm: m «mam la my.“ mammal)“: nmlcclinn mm
namlvl mmfefanoe m a resldsnllal mstaHalim, ms equipmem meme; uses and c." mam radlu muancy Energy am lmunstafled and used in mum-me with me rrsnummns, may cam harmim
interveremke to mm mmmumcaliflns However. there rs no gnsramaa that rnmnerem win rm! nmAr n a pemmlflmmHlnon mus eqmpmefltduas cause harmM mhrkranne mradin ur tsievisiun
mayhem much can be delerminsd by IumInq me eqmpmem nwsnd an. me user ls emnumgw n: W in cmrszl Ihe meflsrenus by me of me fulominq melsules'
- Rmnemarmuuamhn receiving zmenna
- Immense the separsuon bemoan ms Nulpmenland meewer
, semen me eqmpmem imn an mater on a mum mnemlirvm mar
xo mum me mean/er u mnnemed
-(‘Antulnhe aeaAereran exumienoed mam/TV Iechmman for halo
Thlx dsviw compiles wnh Pa“ 15 Dune Fcc Rubs Opera subjecl lame vouwnng (we com4knns.(ti17|is davm may nui cause harm! mterfersnce‘ and (2) m device mum accept any interference
reeexven. incmuing intenerente man my cause undesnred wwalmn.
FCC Cauuw, Mychanges ur mnmncauuns rml emessry rimmed hyme par-y reswngnblslorwmpliance cauld vmd (ha users authcnly m noeraxe mas equipment
‘MFORTANT NOTE
FCI: Ramzhm Exposurn 5.5mm '
This eqmpmemmplm mm FCC ramamm exvowrs limits w farm nor an uncwlmlkd envvmnmem
This equbmenl shcnid bemsralled m swarmed with mmlmum msnarm 20cm between me ramlors your my
ms Irammiller must nu be 00-40th of operating rn wmuncflofl wnn any we: amerm nr transmfller
Lmkws dimmed um wsrswss 45 “men m Cm-fl by spenfied firmware eamrcued In USA.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:06:30 15:41:02+08:00
Modify Date                     : 2004:06:30 15:41:02+08:00
Page Count                      : 7
Creation Date                   : 2004:06:30 07:41:02Z
Mod Date                        : 2004:06:30 07:41:02Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : midoli2
Metadata Date                   : 2004:06:30 07:41:02Z
Creator                         : midoli2
Title                           : scan

EXIF Metadata provided by EXIF.tools