LINKSYS M10V2 Wireless-N Broadband Router User Manual M10 user guide rev

LINKSYS LLC Wireless-N Broadband Router M10 user guide rev

UserManual.wiki >

LINKSYS >

M10V2 User Manual >

Manual Part 3 HTML Version

Manual Part 3

Chapter 3: Advanced Configuration

9. You can filter access to various services accessed over

the Internet, such as FTP or telnet. (You can block up to

three applications per policy.)

From the Applications list, select the application you

want to block. Then click the >> button to move it to

the Blocked List. To remove an application from the

Blocked List, select it and click the << button.

10. If the application you want to block is not listed or you

want to edit a service’s settings, enter the application’s

name in the Application Name field. Enter its range

in the Port Range fields. Select its protocol from the

Protocol drop-down menu. Then click Add.

To modify a service, select it from the Application list.

Change its name, port range, and/or protocol setting.

Then click Modify.

To delete a service, select it from the Application list.

Then click Delete.

11. Click Save Settings to save the policy’s settings. To

cancel the policy’s settings, click Cancel Changes.

Applications and Gaming > Single Port

Forwarding

The Single Port Forwarding screen allows you to customize

port services for common applications on this screen.

When users send these types of requests to your network

via the Internet, the Valet will forward those requests to the

appropriate servers (computers). Before using forwarding,

you should assign static IP addresses to the designated

servers (use the DHCP Reservation feature on the Basic

Setup screen, refer to DHCP Reservation, page 16 for more

details).

Applications and Gaming > Single Port Forwarding

Single Port Forwarding

Common applications are available for the first five

entries. Select the appropriate application. Then enter the

IP address of the server that should receive these requests.

Select Enabled to activate this entry.

For additional applications, complete the following fields:

Application Name Enter the name you wish to give the

application. Each name can be up to 12 characters.

External Port Enter the external port number used by

the server or Internet application. Check with the Internet

application documentation for more information.

Internal Port Enter the internal port number used by

the server or Internet application. Check with the Internet

application documentation for more information.

Protocol Select the protocol used for this application,

either TCP or UDP, or Both.

To IP Address For each application, enter the IP address

of the PC that should receive the requests. If you assigned

a static IP address to the PC, then you can click DHCP

Reservation on the Basic Setup screen to look up its static

IP address (

refer to DHCP Reservation, page 16 for more

details)

Enabled For each application, select Enabled to enable

port forwarding.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Applications and Gaming > Port Range

Forwarding

The Port Range Forwarding screen allows you to set up

public services on your network, such as web servers,

FTP servers, e-mail servers, or other specialized Internet

applications. (Specialized Internet applications are any

applications that use Internet access to perform functions

such as videoconferencing or online gaming. Some Internet

applications may not require any forwarding.)

When users send these types of requests to your network

via the Internet, the Valet will forward those requests to the

appropriate servers (computers). Before using forwarding,

you should assign static IP addresses to the designated

servers (use the DHCP Reservation feature on the Basic

Setup screen, refer to DHCP Reservation, page 16 for more

details).

If you need to forward all ports to one computer, click the

DMZ tab.

Chapter 3: Advanced Configuration

Applications and Gaming > Port Range Forwarding

Port Range Forwarding

To forward a port, enter the information on each line for

the criteria required.

Application Name In this field, enter the name you

wish to give the application. Each name can be up to 12

characters.

Start~End Port Enter the number or range of port(s)

used by the server or Internet applications. Check with the

Internet application documentation for more information.

Protocol Select the protocol used for this application,

either TCP or UDP, or Both.

To IP Address For each application, enter the IP address

of the PC running the specific application. If you assigned

a static IP address to the PC, then you can click DHCP

Reservation on the Basic Setup screen to look up its static

IP address (

refer to DHCP Reservation, page 16 for more

details)

Enabled Select Enabled to enable port forwarding for

the applications you have defined.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Applications & Gaming > Port Range

Triggering

The Port Range Triggering screen allows the Valet to

watch outgoing data for specific port numbers. The IP

address of the computer that sends the matching data

is remembered by the Valet, so that when the requested

data returns through the Valet, the data is pulled back

to the proper computer by way of IP address and port

mapping rules.

Applications and Gaming > Port Range Triggering

Port Range Triggering

Application Name Enter the application name of the

trigger.

Triggered Range For each application, enter the starting

and ending port numbers of the triggered port number

range. Check with the Internet application documentation

for the port number(s) needed.

Forwarded Range For each application, enter the

starting and ending port numbers of the forwarded

port number range. Check with the Internet application

documentation for the port number(s) needed.

Enabled Select Enabled to enable port triggering for the

applications you have defined.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Applications and Gaming > DMZ

The DMZ feature allows one network computer to be

exposed to the Internet for use of a special-purpose

service such as Internet gaming or videoconferencing.

DMZ hosting forwards all the ports at the same time to

one PC. The Port Range Forwarding feature is more secure

because it only opens the ports you want to have opened,

while DMZ hosting opens all the ports of one computer,

exposing the computer to the Internet.

Applications and Gaming > DMZ

Chapter 3: Advanced Configuration

DMZ

Any PC whose port is being forwarded must have its DHCP

client function disabled and should have a new static IP

address assigned to it because its IP address may change

when using the DHCP function.

Enabled/Disabled To disable DMZ hosting, select

Disabled. To expose one PC, select Enabled. Then

configure the following settings:

Source IP Address If you want any IP address to be the

source, select Any IP Address. If you want to specify an IP

address or range of IP addresses as the designated source,

select and complete the IP address range fields.

Destination If you want to specify the DMZ host by IP

address, select IP Address and enter the IP address in

the field provided. If you want to specify the DMZ host

by MAC address, select MAC Address and enter the MAC

address in the field provided. To retrieve this information,

click DHCP Client Table.

DMZ > DHCP Client Table

DHCP Client Table

The DHCP Client Table lists computers and other

devices that have been assigned IP addresses by the

Valet. The list can be sorted by Client Name, Interface,

IP Address, MAC Address, and Expired Time (how

much time is left for the current IP address). To select

a DHCP client, click Select. To retrieve the most up-

to-date information, click Refresh. To exit this screen

and return to the DMZ screen, click Close.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Applications and Gaming > QoS

Quality of Service (QoS) ensures better service to

high-priority types of network traffic, which may

involve demanding, real-time applications, such as

videoconferencing.

Applications and Gaming > QoS

QoS (Quality of Service)

Wireless

You can configure the WMM Support and No

Acknowledgement settings in this section.

WMM Support If you have other devices that support Wi-

Fi Multimedia (WMM) on your network, keep the default,

Enabled. Otherwise, select Disabled.

No Acknowledgement If you want to disable the Valet’s

Acknowledgement feature, so the Valet will not re-send

data if an error occurs, then select Enabled. Otherwise,

keep the default, Disabled.

Internet Access Priority

In this section, you can set the bandwidth priority for a

variety of applications and devices. There are four levels

priority: High, Medium, Normal, or Low. When you set

priority, do not set all applications to High, because this will

defeat the purpose of allocating the available bandwidth.

If you want to select below normal bandwidth, select Low.

Depending on the application, a few attempts may be

needed to set the appropriate bandwidth priority.

Enabled/Disabled To use the QoS policies you have set,

select, Enabled. Otherwise, keep the default Disabled.

Upstream Bandwidth Select Auto or Manual from

the drop-down menu. Manual allows you to specify the

maximum outgoing bandwidth that applications can

utilize.

Chapter 3: Advanced Configuration

Category

You can define the Internet access priority level for as

many categories as you want. The Summary section will

display all of the priority selections that you enter. Select

from the following categories:

•Applications Allows you to assign the bandwidth

priority level for a pre-defined application (selected

from the list) or add a new application and port

settings and then prioritize it.

•Online Games Allows you to assign a priority level for

a pre-defined game selection that you can select from

the list or add the settings for a game that isn’t listed

and select the priority level.

•MAC Address This option lets you prioritize network

traffic based on the device that is accessing the

network. For example, if you want your gaming

console to have higher priority accessing the Internet

than your computer, you can define that here based

on their MAC addresses.

•Ethernet Port This option allows you to prioritize

traffic connected to a specific Ethernet port. For

example, you can prioritize Internet access for the

computer connected to port 1.

•Voice Device Voice devices demand a higher level

of Internet prioritization. If you have a voice device or

devices on your network that you want to prioritize,

you can enter their MAC address using this option.

Proceed to the instructions for your selection.

Applications

Applications Select the appropriate application. If you

select Add a New Application, follow the Add a New

Application instructions.

Priority Select the appropriate priority: High, Medium,

Normal, or Low.

Click Add to save your changes. Your new entry will appear

in the Summary list.

Add a New Application

QoS > Add a New Application

Enter a Name Enter any name to indicate the name of

the entry.

Port Range Enter the port range that the application will

be using. For example, if you want to allocate bandwidth

for FTP, you can enter 21-21. If you need services for an

application that uses from 1000 to 1250, you enter 1000-

1250 as your settings. You can have up to three ranges

to define for this bandwidth allocation. Port numbers

can range from 1 to 65535. Check your application’s

documentation for details on the service ports used.

Select the protocol TCP or UDP, or select Both.

Priority Select the appropriate priority: High, Medium

(Recommend), Normal, or Low.

Click Add to save your changes. Your new entry will appear

in the Summary list.

Online Games

QoS > Online Games

Games Select a game from the drop-down list of

pre-defined game settings. If the game that you are

playing is not listed, select Add a New Game. When you

select Add a New Game, you will need to enter the name

of the game, the port range, and the priority level for the

game. Refer to the documentation for the game or the

game manufacturer’s website to find the necessary port

information.

Priority Select the appropriate priority: High, Medium

(Recommend), Normal, or Low.

Click Add to save your changes. Your new entry will appear

in the Summary list.

MAC Address

QoS > MAC Address

Enter a Name Enter a name for your device.

MAC Address Enter the MAC address of your device.

Priority Select the appropriate priority: High, Medium

(Recommend), Normal, or Low.

Click Add to save your changes. Your new entry will appear

in the Summary list.

Chapter 3: Advanced Configuration

Ethernet Port

QoS > Ethernet Port

Ethernet Select the appropriate Ethernet port.

Priority Select the appropriate priority: High, Medium

(Recommend), Normal, or Low.

Click Add to save your changes. Your new entry will appear

in the Summary list.

Voice Device

QoS > Voice Device

Enter a Name Enter a name for your voice device.

MAC Address Enter the MAC address of your voice

device.

Priority Select the appropriate priority: High

(Recommend), Medium, Normal, or Low.

Click Add to save your changes. Your new entry will appear

in the Summary list.

Summary

This lists the QoS entries you have created for your

applications and devices.

Priority This column displays the bandwidth priority of

High, Medium, Normal, or Low.

Name This column displays the application, device, or

port name.

Information This column displays the port range or

MAC address entered for your entry. If a pre-configured

application or game was selected, there will be no valid

entry shown in this section.

Remove Click this button to remove an entry.

Edit Click this button to make changes.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Administration > Management

The Administration > Management screen allows the

network’s administrator to manage specific Valet functions

for access and security.

Administration > Management

Management

Router Access

To ensure the Valet’s security, you will be asked for your

password when you access the Valet’s browser-based

utility. The default is admin.

Router Password Enter a new password for the Valet.

Re-enter to confirm Enter the password again to confirm.

Web Access

Web Utility Access HTTP (HyperText Transport Protocol)

is the communications protocol used to connect to servers

on the World Wide Web. HTTPS uses SSL (Secure Socket

Layer) to encrypt data transmitted for higher security.

Select HTTP or HTTPS. HTTP is the default.

Web Utility Access via Wireless If you are using the Valet

in a public domain where you are giving wireless access to

your guests, you can disable wireless access to the Valet’s

browser-based utility. You will only be able to access the

utility via a wired connection if you disable the setting.

Keep the default, Enabled, to allow wireless access to the

utility, or select Disabled to block wireless access to the

utility.

Remote Access

Remote Management To permit remote access of the

Valet, from outside the local network, select Enabled.

Otherwise, keep the default, Disabled.

Chapter 3: Advanced Configuration

Web Utility Access HTTP (HyperText Transport Protocol)

is the communications protocol used to connect to servers

on the World Wide Web. HTTPS uses SSL (Secured Socket

Layer) to encrypt data transmitted for higher security.

Select HTTP or HTTPS. HTTP is the default.

Remote Upgrade If you want to be able to upgrade the

Valet firmware remotely, from outside the local network,

select Enabled. (You must have the Remote Management

feature enabled as well.) Otherwise, keep the default,

Disabled.

Allowed Remote IP Address If you want to be able to

access the Valet from any external IP address, select Any

IP Address. If you want to specify an external IP address or

range of IP addresses, then select the second option and

complete the fields provided.

Remote Management Port Enter the port number that

will be open to outside access.

NOTE: When you are in a remote location

and wish to manage the Valet, enter

http://<Internet_IP_address>:port or

ht tp s: / /< I nt er ne t_ I P_ a dd re ss >: p or t ,

depending on whether you use HTTP or HTTPS.

Enter the Valet’s specific Internet IP address in

place of <Internet_IP_address>, and enter the

Remote Management Port number in place of

the word port.

UPnP

Universal Plug and Play (UPnP) allows computers to

automatically configure the Valet for various Internet

applications, such as gaming and videoconferencing.

UPnP If you want to use UPnP, keep the default setting,

Enabled. Otherwise, select Disabled.

Allow Users to Configure Keep the default, Enabled, if

you want to be able to make manual changes to the Valet

while using the UPnP feature. Otherwise, select Disabled.

Allow Users to Disable Internet Access Select Enabled,

if you want to be able to prohibit any and all Internet

connections. Otherwise, keep the default setting,

Disabled.

Backup and Restore

Backup Configurations To back up the Valet’s

configuration settings, click this button and follow the

on-screen instructions.

Restore Configurations To restore the Valet’s

configuration settings, click this button and follow the

on-screen instructions. (You must have previously backed

up the Valet’s configuration settings.)

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Administration > Log

The Valet can keep logs of all traffic for your Internet

connection.

Administration > Log

Log

Log By default the logging option is Disabled. To

monitor traffic between the network and the Internet,

select Enabled. With logging enabled, you can choose to

view temporary logs.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

View Log To view the logs, click View Log.

Administration > Log > View Log

Log

•Type Select Incoming Log, Outgoing Log, Security

Log, or DHCP Client Log.

•<Type> Log The Incoming Log will display a

temporary log of the source IP addresses and

destination port numbers for the incoming Internet

traffic. The Outgoing Log will display a temporary

log of the local IP addresses, destination URLs/IP

addresses, and service/port numbers for the outgoing

Internet traffic. The Security log will display the login

information for the browser-based utility. The DHCP

Client Log will display the LAN DHCP server status

information.

Click Save the Log to save this information to a file on

your PC’s hard drive. Click Refresh to update the log.

Click Clear to clear all the information that is displayed.

Chapter 3: Advanced Configuration

Administration > Diagnostics

The diagnostic tests (Ping and Traceroute) allow you to

check the connections of your network devices, including

connection to the Internet. This screen also allows you to

reset the Valet.

Administration > Diagnostics

Reboot

Reboot Click Reboot to reboot the Valet.

Diagnostics

Ping Test

The Ping test checks the status of a connection.

IP or URL Address Enter the address of the computer,

device, or website whose connection you wish to test.

Packet Size Enter the packet size you want to use. The

default is 32 bytes.

Times to Ping Enter many times you wish to test it.

Start to Ping To run the test, click this button. The Ping

Test screen will show if the test was successful. Click Close

to return to the Diagnostics screen.

Diagnostics > Ping

Traceroute Test

The Traceroute test tests the performance of a connection.

IP or URL Address Enter the address of the computer,

device, or website whose connection you wish to test.

Start to Traceroute To run the test, click this button. The

Traceroute Test screen will show if the test was successful.

Click Close to return to the Diagnostics screen.

Diagnostics > Traceroute

Administration > Factory Defaults

The Administration > Factory Defaults screen allows you

to restore the Valet’s configuration to its factory default

settings.

Administration > Factory Defaults

NOTE: Do not restore the factory defaults

unless you are having difficulties with the Valet

and have exhausted all other troubleshooting

measures. Once the Valet is reset, you will have

to re-enter all of your configuration settings.

Factory Defaults

Restore All Settings To reset the Valet’s settings to

the default values, click this button and then follow the

on-screen instructions. Any settings you have saved will

be lost when the default settings are restored.

Chapter 3: Advanced Configuration

Administration > Firmware Upgrade

The Firmware Upgrade screen allows you to upgrade the

Valet’s firmware. Do not upgrade the firmware unless

you are experiencing problems with the Valet or the new

firmware has a feature you want to use.

Administration > Firmware Upgrade

NOTE: The Valet may lose the settings you have

customized. Before you upgrade its firmware,

write down all of your custom settings. After

you upgrade its firmware, you may have to

re-enter all of your configuration settings.

Firmware Upgrade

Before upgrading the firmware, download the firmware

upgrade file specifically for your model from the website,

www.ciscovalet.com.

Please select a file to upgrade the firmware Click

Browse and select the firmware upgrade file.

Start to Upgrade After you have selected the appropriate

file, click this button, and f

ollow the on-screen instructions.

WARNING: Do not interrupt the upgrade

process. You should not turn off the power or

press the reset button during the upgrade

process. Doing so may render the Valet

unusable.

Status > Router

The Router screen displays information about the Valet

and its current settings.

Status > Router

Router Information

Firmware Version This is the version number of the

Valet’s current firmware.

Firmware Verification This shows the unique identifier

of the firmware.

Current Time This shows the time set on the Valet.

Internet MAC Address This is the Valet’s MAC Address, as

seen by your ISP.

Host Name If required by your ISP, this was entered on

the Basic Setup screen.

Domain Name If required by your ISP, this was entered

on the Basic Setup screen.

Internet Connection

This section shows the current network information

stored in the Valet. The information varies depending on

the Internet connection type selected on the Basic Setup

screen.

Click Refresh to update the on-screen information.

Chapter 3: Advanced Configuration

Status > Local Network

The Local Network screen displays information about the

local, wired network.

Status > Local Network

Local Network

Local MAC Address The MAC address of the Valet’s local,

wired interface is displayed here.

Router IP Address This shows the Valet’s IP address, as it

appears on your local network.

Subnet Mask This shows the Subnet Mask of the Valet.

DHCP Server

DHCP Server The status of the Valet’s DHCP server

function is displayed here.

Start IP Address This displays the first available IP address

that can be used by devices on your local network.

End IP Address This displays the last available IP address

that can be used by devices on your local network.

DHCP Clients Table Click this button to view a list of

computers and devices that are using the Valet as a DHCP

server.

DHCP Clients Table

DHCP Client Table

The DHCP Client Table lists computers and other

devices that have been assigned IP addresses by the

Valet. The list can be sorted by Client Name, Interface,

IP Address, MAC Address, and Expired Time (how

much time is left for the current IP address). To remove

a DHCP client, click Delete. To retrieve the most

up-to-date information, click Refresh. To exit this

screen and return to the Local Network screen, click

Close.

Status > Wireless Network

The Wireless Network screen displays information about

your wireless network.

Status > Wireless

Wireless Network

MAC Address The MAC address of the Valet’s local,

wireless interface is displayed here.

Mode Displayed here is the wireless mode used by the

network.

Network Name (SSID) Displayed here is the name of the

wireless network, which is also called the SSID.

Channel Width Shown here is the Channel Width setting

selected on the Basic Wireless Settings screen.

Channel Shown here is the Channel setting selected on

the Basic Wireless Settings screen.

Security Displayed here is the wireless security method

used by the Valet.

SSID Broadcast Displayed here is the status of the SSID

Broadcast feature.

Appendix A: Troubleshooting

Your computer cannot connect to the Internet.

Follow these instructions until your computer can connect

to the Internet:

•Make sure that the Valet is powered on. The Power

LED should be blue and not flashing.

•If the Power LED is flashing, then power off all of

your network devices, including the modem, Valet,

and computers. Then power on each device in the

following order:

1. Cable or DSL modem

2. Valet

3. Computer

•Check the cable connections. The computer should

be connected to one of the ports numbered 1-4 on

the Valet, and the modem must be connected to the

Internet port on the Valet.

The modem does not have an Ethernet port.

The modem is a dial-up modem for traditional dial-up

service. To use the Valet, you need a cable/DSL modem

and high-speed Internet connection.

You cannot use the DSL service to connect manually to

the Internet.

After you have installed the Valet, it will automatically

connect to your Internet Service Provider (ISP), so you no

longer need to connect manually.

The DSL telephone line does not fit into the Valet’s

Internet port.

The Valet does not replace your modem. You still need

your DSL modem in order to use the Valet. Connect the

telephone line to the DSL modem, and then insert the

setup CD into your computer. Click Setup and follow the

on-screen instructions.

When you double-click the web browser, you are

prompted for a username and password. If you want to

get rid of the prompt, follow these instructions.

Launch the web browser and perform the following steps

(these steps are specific to Internet Explorer but are similar

for other browsers):

1. Select Tools > Internet Options.

2. Click the Connections tab.

3. Select Never dial a connection.

4. Click OK.

The Valet does not have a coaxial port for the cable

connection.

The Valet does not replace your modem. You still need

your cable modem in order to use the Valet. Connect your

cable connection to the cable modem, and then insert the

setup CD into your computer. Click Setup and follow the

on-screen instructions.

The computer cannot connect wirelessly to the network.

Make sure the wireless network name or SSID is the same

on both the computer and the Valet. If you have enabled

wireless security, then make sure the same security

method and key are used by both the computer and the

Valet.

You need to modify the settings on the Valet.

Valet settings can be modified using the Cisco Connect

software, refer to How to Access Cisco Connect, page 12.

To modify the advanced settings, go to Advanced Settings.

Refer to Advanced Settings, page 12.

In Windows XP, you do not see the Valet in the My

Network Places screen.

In the Network Tasks section, click Show icons for

networked UPnP devices. If the Valet does not appear,

follow these instructions:

1. Go to Start > Control Panel > Firewall.

2. Click the Exceptions tab.

3. Select UPnP Framework.

4. Click OK.

WEB: If your questions are not

addressed here, refer to our website at

www.ciscovalet.com/support

Appendix B: Specifications

Model Name:

Model Description: Wireless-N Hotspot

Model Number: M10

Standards IEEE 802.11n, 802.11g, 802.11b,

802.3u

Ports Internet, Fast Ethernet (1-4),

Power

Buttons Reset, Wi-Fi Protected Setup™

LEDs Power, Internet, Wireless,

Wi-Fi Protected Setup™,

Ethernet (1-4)

Cabling Type CAT 5

# of Antennas 2 (internal)

Detachable (y/n) No

Transmitted Power

802.11n (40MHz): 13.5 ± 1.5 dBm @ CH6, mcs15

802.11n (20MHz): 15.0 ± 1.5 dBm @ CH6, mcs0~4,

mcs8~12

13.5 ± 1.5 dBm @ CH6, mcs5~7,

mcs13~15

802.11g: 14.5 ± 1.5 dBm

802.11b: 16.5 ± 1.5 dBm

Receive Sensitivity -91 dBm @ 1 Mbps

-87 dBm @ 11 Mbps

-71 dBm @ 54 Mbps

-66 dBm @ 270 Mbps

Antenna Gain 1.5 dBi

UPnP able/cert Able

Wireless Security Wi-Fi Protected Access™ 2 (WPA2),

WEP, Wireless MAC Filtering

Security key bits Up to 128-bit encryption

Environmental

Dimensions 7.95" x 6.3" x 1.34"

(202 x 160 x 34 mm)

Weight 9.9 oz (0.2806 kg)

Power 12V, 0.5A

Certication FCC, UL/cUL, ICES-003, RSS210, CE,

Wi-Fi (IEEE 802.11b/g/n), WPA2™,

WMM®, Wi-Fi Protected Setup™

Operating Temp. 32 to 104°F (0 to 40°C)

Storage Temp. -4 to 140°F (-20 to 60°C)

Operating Humidity 10 to 80% Noncondensing

Storage Humidity 5 to 90% Noncondensing

Specications are subject to change without notice.

Model Name :

Model Description: Wireless-N Hotspot

Model Number: M20

Standards IEEE 802.11n, 802.11g, 802.11b,

802.3u, 802.3ab

Ports Internet, Gigabit Ethernet (1-4),

Power

Buttons Reset, Wi-Fi Protected Setup™

LEDs Power, Internet, Wireless,

Wi-Fi Protected Setup™,

Ethernet (1-4)

Cabling Type CAT 5

# of Antennas 3 (internal)

Detachable (y/n) No

Transmitted Power

802.11n (40 MHz): 13.0 ± 1.5 dBm @ CH6, 25°C

802.11n (20 MHz): 15.5 ± 1.5 dBm @ CH6, 25°C

802.11g: 16.5 ± 1.5 dBm @ CH 6, 25°C

802.11b: 17.5 ± 1.5 dBm @ CH 6, 25°C

Receive Sensitivity in dBm

-92dBm @ 1 Mbps

-87dBm @ 11 Mbps

-71dBm @ 54 Mbps

-66dBm @ 270 Mbps

Antenna Gain in dBi 1.5 dBi (antennas one and two)

2.2 dBi (antenna three)

UPnP able/cert Able

Wireless Security Wi-Fi Protected Access™ 2 (WPA2),

WEP, Wireless MAC Filtering

Security key bits Up to 128-bit encryption

Environmental

Dimensions 7.95" x 6.3" x 1.34"

(202 x 160 x 34 mm)

Weight 10.9 oz (0.309 kg)

Power 12V, 1.0A

Certication FCC, UL/cUL, ICES-003, RSS210, CE,

Wi-Fi (IEEE 802.11b/g/n), WPA2™,

WMM®, Wi-Fi Protected Setup™

Operating Temp. 32 to 104°F (0 to 40°C)

Storage Temp. -4 to 140°F (-20 to 60°C)

Operating Humidity 10 to 80% Noncondensing

Storage Humidity 5 to 90% Noncondensing

Specications are subject to change without notice.

2 dBi

Appendix C: Warranty Information

LIMITED WARRANTY

(U.S.A, Canada, Asia Pacific, Australia, New Zealand)

FOR CONSUMERS WHO ARE COVERED BY CONSUMER

PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY

OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF

RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY

ARE IN ADDITION TO ALL RIGHTS AND REMEDIES

CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND

REGULATIONS. THIS WARRANTY DOES NOT EXCLUDE,

LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING

OUT OF NONCONFORMITY WITH A SALES CONTRACT.

SOME COUNTRIES, STATES AND PROVINCES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON

HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY

LAST, SO THE LIMITATIONS OR EXCLUSIONS DESCRIBED

BELOW MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO

HAVE OTHER RIGHTS THAT VARY BY COUNTRY, STATE OR

PROVINCE. THIS LIMITED WARRANTY IS GOVERNED BY

AND CONSTRUED UNDER THE LAWS OF THE COUNTRY IN

WHICH THE PRODUCT PURCHASE TOOK PLACE.

This warranty is provided to you by Cisco Systems, Inc.

or its subsidiary instead of Cisco Systems, Inc. (“Cisco”).

Cisco warrants the hardware in this Cisco product against

defects in materials and workmanship under normal

use for the Warranty Period, which begins on the date of

purchase by the original end-user purchaser and lasts for

the period specified below:

•One (1) year for new product

•Ninety (90) days for refurbished product

Your exclusive remedy and Cisco’s entire liability under

this limited warranty will be for Cisco, at its option, to

(a) repair the product with new or refurbished parts,

(b) replace the product with a reasonably available

equivalent new or refurbished Cisco product, or (c) refund

the actual purchase price of the product less any rebates

and discounts, or (d) pay the cost of repair of the product.

Any repaired or replacement products will be warranted

for the remainder of the original Warranty Period or thirty

(30) days, whichever is longer. All products and parts that

are replaced become the property of Cisco.

Cisco additionally warrants that any media on which the

software may be provided will be free from defects in

materials and workmanship under normal use for a period

of ninety (90) days from the date of original purchase.

Your exclusive remedy and Cisco’s entire liability under

this limited warranty will be for Cisco, at its option, to (a)

replace the software media, or (b) refund the purchase

price of the software media.

EXCLUSIONS AND LIMITATIONS

This limited warranty does not apply if: (a) the product

assembly seal has been removed or damaged, (b) the

product has been altered or modified, except by Cisco, (c)

the product damage was caused by use with non-Cisco

products, (d) the product has not been installed, operated,

repaired, or maintained in accordance with instructions

supplied by Cisco, (e) the product has been subjected to

abnormal physical or electrical stress, misuse, negligence,

or accident, (f) the serial number on the Product has been

altered, defaced, or removed, or (g) the product is supplied

or licensed for beta, evaluation, testing or demonstration

purposes for which Cisco does not charge a purchase

price or license fee.

EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET

FORTH ABOVE AND TO THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, ALL SOFTWARE AND SERVICES

PROVIDED BY CISCO WITH THE PRODUCT, WHETHER

FACTORY LOADED ON THE PRODUCT OR CONTAINED ON

MEDIA ACCOMPANYING THE PRODUCT, IS PROVIDED “AS

IS” WITHOUT WARRANTY OF ANY KIND. Without limiting

the foregoing, Cisco does not warrant that the operation

of the product, software or services will be uninterrupted

or error free. Also, due to the continual development

of new techniques for intruding upon and attacking

networks, Cisco does not warrant that the product,

software or services, or any equipment, system or network

on which the product, software or services are used will

be free of vulnerability to intrusion or attack. The product

may include or be bundled with third party software or

service offerings. This limited warranty shall not apply to

such third party software or service offerings. This limited

warranty does not guarantee any continued availability

of a third party’s service for which this product’s use or

operation may require.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE

LAW, ALL IMPLIED WARRANTIES AND CONDITIONS

OF MERCHANTABILITY, SATISFACTORY QUALITY OR

FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO

THE DURATION OF THE WARRANTY PERIOD. ALL OTHER

EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS

AND WARRANTIES, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE

DISCLAIMED.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,

IN NO EVENT WILL CISCO BE LIABLE FOR ANY LOST DATA,

REVENUE OR PROFIT, LOSS OF THE ABILITY TO USE ANY

THIRD PARTY PRODUCTS, SOFTWARE OR SERVICES, OR

FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL

OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY

OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT

OF OR RELATED TO THE USE OF OR INABILITY TO USE

THE PRODUCT, SOFTWARE OR ANY SERVICES PROVIDED

IN RESPECT OF SUCH PRODUCT, SOFTWARE OR SERVICE,

EVEN IF CISCO HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES. TO THE EXTENT NOT PROHIBITED BY

Appendix C: Warranty Information

APPLICABLE LAW, IN NO EVENT WILL CISCO’S LIABILITY

EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.

The foregoing limitations will apply even if any warranty

or remedy provided under this limited warranty fails of its

essential purpose.

If you live in and have purchased the product in Australia

or New Zealand, the following two (2) paragraphs will

apply in place of the preceding paragraph:

To the extent permitted by law, Cisco excludes liability

for any lost data, revenue or profit, loss of the ability to

use any third party products, software or services, and

indirect or consequential loss, whether based in statute,

common law (including negligence) or otherwise, arising

out of or related to the use of or inability to use the

product, software, or any services provided in respect of

such product, software or service, even if Cisco has been

advised of the possibility of such damages and Cisco limits

its liability to an amount not exceeding the amount paid

by you for the product.

Part V of the Trade Practices Act (1974) (C’th of Australia),

corresponding consumer protection provisions of

Australian State and Territory legislation and the Consumer

Guarantees Act 1993 (New Zealand) (together, “Applicable

Laws”) imply terms and warranties which operate to

protect certain Australian and New Zealand purchasers of

goods and services in various circumstances. Nothing in

this warranty excludes, restricts or modifies any condition,

warranty, right or remedy implied or imposed by any

Applicable Laws which cannot lawfully be excluded,

restricted or modified.

No Cisco employee, agent or reseller is authorized to

make any verbal or written modification, extension or

addition to this warranty, and Cisco expressly disclaims

any such change to this warranty. If any portion of this

limited warranty is found to be void or unenforceable, its

remaining provisions shall remain in full force and effect.

OBTAINING WARRANTY SERVICE

If you have a question about your product or experience

a problem with it, please go to www.myciscohome.com/

support where you will find a variety of online support

tools and information to assist you with your product. If

the product proves defective during the Warranty Period,

contact Cisco Technical Support (or, if you purchased

your product from a service provider, contact the service

provider) for instructions on how to obtain warranty

service. The telephone number for Cisco Technical

Support in your area can be found by clicking the “Contact

Us” link on the home page of www.myciscohome.com.

Have your product serial number and proof of purchase

on hand when calling. A DATED PROOF OF ORIGINAL

PURCHASE IS REQUIRED TO PROCESS WARRANTY CLAIMS.

If you are requested to return your product, you will be

given a Return Materials Authorization (RMA) number.

You are responsible for properly packaging and shipping

your product at your cost and risk. You must include the

RMA number and a copy of your dated proof of original

purchase when returning your product. Products received

without a RMA number and dated proof of original

purchase will be rejected. Do not include any other items

with the product you are returning. Products returned

for replacement must be returned to Cisco in the same

country in which the original product was purchased.

Defective product covered by this limited warranty will be

repaired or replaced and returned to you without charge.

Customers outside of the United States of America and

Canada are responsible for all shipping and handling

charges, custom duties, VAT and other associated taxes

and charges. Repairs or replacements not covered under

this limited warranty will be subject to charge at Cisco’s

then-current rates.

TECHNICAL SUPPORT

This limited warranty is neither a service nor a

support contract. Information about Cisco’s current

technical support offerings and policies (including

any fees for support services) can be found at

www.myciscohome.com/support.

Please direct all inquiries to: Cisco, 120 Theory, Irvine, CA

92617

Appendix D: Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

This product has been tested and complies with the

specifications for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in

a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used according to the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which is found by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment or

devices

•Connect the equipment to an outlet other than the

receiver’s

•Consult a dealer or an experienced radio/TV technician

for assistance

FCC Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment. IEEE

802.11b or 802.11g operation of this product in the USA is

firmware-limited to channels 1 through 11.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with

minimum distance 20 cm between the radiator and your

body.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Safety Notices

WARNING: Do not use this product near water,

for example, in a wet basement or near a

swimming pool.

WARNING: Avoid using this product during an

electrical storm. There may be a remote risk of

electric shock from lightning.

WARNING: This product contains lead, known

to the State of California to cause cancer, and

birth defects or other reproductive harm. Wash

hands after handling.

Industry Canada Statement

This Class B digital apparatus complies with Canadian

ICES-003 and RSS210.

Operation is subject to the following two conditions:

1. This device may not cause interference and

2. This device must accept any interference, including

interference that may cause undesired operation of

the device. This device has been designed to operate

with an antenna having a maximum gain of 1.5 dBi.

Antenna having a higher gain is strictly prohibited per

regulations of Industry Canada. The required antenna

impedance is 50 ohms.

Industry Canada Radiation Exposure

Statement:

This equipment complies with IC radiation exposure limits

set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance

20 cm between the radiator & your body.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Avis d’Industrie Canada

Cet appareil numérique de la classe B est conforme aux

normes NMB-003 et RSS210 du Canada.

L’utilisation de ce dispositif est autorisée seulement aux

conditions suivantes :

1. il ne doit pas produire de brouillage et

2 dBi

Appendix D: Regulatory Information

2. il doit accepter tout brouillage radioélectrique reçu,

même si ce brouillage est susceptible de compromettre

le fonctionnement du dispositif. Le dispositif a été

conçu pour fonctionner avec une antenne ayant un

gain maximum de 1.5 dBi. Les règlements d’Industrie

Canada interdisent strictement l’utilisation d’antennes

dont le gain est supérieur à cette limite. L’impédance

requise de l’antenne est de 50 ohms.

Avis d’Industrie Canada concernant

l’exposition aux radiofréquences :

Ce matériel est conforme aux limites établies par IC

en matière d’exposition aux radiofréquences dans un

environnement non contrôlé. Ce matériel doit être installé

et utilisé à une distance d’au moins 20 cm entre l’antenne

et le corps de l’utilisateur.

L’émetteur ne doit pas être placé près d’une autre antenne

ou d’un autre émetteur, ou fonctionner avec une autre

antenne ou un autre émetteur.

Wireless Disclaimer

The maximum performance for wireless is derived from

IEEE Standard 802.11 specifications. Actual performance

can vary, including lower wireless network capacity,

data throughput rate, range and coverage. Performance

depends on many factors, conditions and variables,

including distance from the access point, volume of

network traffic, building materials and construction,

operating system used, mix of wireless products used,

interference and other adverse conditions.

Avis de non-responsabilité concernant

les appareils sans fil

Les performances maximales pour les réseaux sans fil

sont tirées des spécifications de la norme IEEE 802.11.

Les performances réelles peuvent varier, notamment

en fonction de la capacité du réseau sans fil, du débit

de la transmission de données, de la portée et de la

couverture. Les performances dépendent de facteurs,

conditions et variables multiples, en particulier de la

distance par rapport au point d’accès, du volume du trafic

réseau, des matériaux utilisés dans le bâtiment et du

type de construction, du système d’exploitation et de la

combinaison de produits sans fil utilisés, des interférences

et de toute autre condition défavorable.

User Information for Consumer Products

Covered by EU Directive 2002/96/EC on Waste

Electric and Electronic Equipment (WEEE)

This document contains important information for users

with regards to the proper disposal and recycling of Cisco

products. Consumers are required to comply with this

notice for all electronic products bearing the following

symbol:

English - Environmental Information for Customers in

the European Union

European Directive 2002/96/EC requires that the equipment

bearing this symbol on the product and/or its packaging must

not be disposed of with unsorted municipal waste. The symbol

indicates that this product should be disposed of separately

from regular household waste streams. It is your responsibility to

dispose of this and other electric and electronic equipment via

designated collection facilities appointed by the government or

local authorities. Correct disposal and recycling will help prevent

potential negative consequences to the environment and

human health. For more detailed information about the disposal

of your old equipment, please contact your local authorities,

waste disposal service, or the shop where you purchased the

product.

Español (Spanish) - Información medioambiental para

clientes de la Unión Europea

La Directiva 2002/96/CE de la UE exige que los equipos que

lleven este símbolo en el propio aparato y/o en su embalaje

no deben eliminarse junto con otros residuos urbanos no

seleccionados. El símbolo indica que el producto en cuestión

debe separarse de los residuos domésticos convencionales con

vistas a su eliminación. Es responsabilidad suya desechar este y

cualesquiera otros aparatos eléctricos y electrónicos a través de

los puntos de recogida que ponen a su disposición el gobierno y

las autoridades locales. Al desechar y reciclar correctamente estos

aparatos estará contribuyendo a evitar posibles consecuencias

negativas para el medio ambiente y la salud de las personas. Si

desea obtener información más detallada sobre la eliminación

segura de su aparato usado, consulte a las autoridades locales,

al servicio de recogida y eliminación de residuos de su zona o

pregunte en la tienda donde adquirió el producto.

Français (French) - Informations environnementales

pour les clients de l’Union européenne

La directive européenne 2002/96/CE exige que l’équipement

sur lequel est apposé ce symbole sur le produit et/ou son

emballage ne soit pas jeté avec les autres ordures ménagères. Ce

symbole indique que le produit doit être éliminé dans un circuit

distinct de celui pour les déchets des ménages. Il est de votre

responsabilité de jeter ce matériel ainsi que tout autre matériel

électrique ou électronique par les moyens de collecte indiqués

par le gouvernement et les pouvoirs publics des collectivités

territoriales. L’élimination et le recyclage en bonne et due forme

ont pour but de lutter contre l’impact néfaste potentiel de ce

type de produits sur l’environnement et la santé publique. Pour

plus d’informations sur le mode d’élimination de votre ancien

équipement, veuillez prendre contact avec les pouvoirs publics

locaux, le service de traitement des déchets, ou l’endroit où vous

avez acheté le produit.

WEB: For additional information, please visit

www.myciscohome.com

2 dBi

Appendix E: Software End User License Agreement

Appendix E: Software End User

License Agreement

Cisco Products

This product from Cisco Systems, Inc. or its subsidiary

licensing the Software instead of Cisco Systems,

Inc. (“Cisco”) contains software (including firmware)

originating from Cisco and its suppliers and may also

contain software from the open source community.

Any software originating from Cisco and its suppliers is

licensed under the Cisco Software License Agreement

contained at Schedule 1 below. You may also be

prompted to review and accept the Cisco Software License

Agreement upon installation of the software.

Any software from the open source community is licensed

under the specific license terms applicable to that

software made available by Cisco at www.myciscohome.

com/gpl, or as provided for in Schedule 2 below. By

using the Software, You or the entity or company that You

represent (“You”) acknowledge that You have reviewed

such license terms and that You agree to be bound by

the terms of such licenses. Where such specific license

terms entitle You to the source code of such software,

that source code is available upon request at cost from

Cisco for at least three years from the purchase date of

this product and may also be available for download from

www.myciscohome.com/gpl. For detailed license terms

and additional information on open source software in

Cisco products please look at the Cisco public web site

at: www.myciscohome.com/gpl/ or Schedule 2 below as

applicable. If You would like a copy of the GPL or certain

other open source code in this Software on a CD, Cisco will

mail to You a CD with such code for $9.99 plus the cost of

shipping, upon request.

THIS SOFTWARE END USER LICENSE AGREEMENT IS

A LEGAL AGREEMENT BETWEEN YOU AND CISCO.

READ IT CAREFULLY BEFORE INSTALLING AND USING

THE SOFTWARE. IT PROVIDES A LICENSE TO USE THE

SOFTWARE AND CONTAINS WARRANTY INFORMATION

AND LIABILITY DISCLAIMERS. BY CHECKING THE “NEXT”

BOX, DOWNLOADING, INSTALLING OR USING THE

SOFTWARE, OR USING THE PRODUCT CONTAINING THE

SOFTWARE, YOU ARE CONFIRMING YOUR ACCEPTANCE OF

THE SOFTWARE AND CONSENTING TO BE BOUND BY THIS

AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE

TERMS, THEN DO NOT CLICK ON THE “NEXT” BUTTON AND

DO NOT DOWNLOAD, INSTALL OR USE THE SOFTWARE.

CISCO’S ACCEPTANCE IS EXPRESSLY CONDITIONED UPON

YOUR AGREEMENT TO ALL THE TERMS AND CONDITIONS

OF THIS AGREEMENT, TO THE EXCLUSION OF ALL OTHER

TERMS.

In addition, if You access or otherwise use any of Cisco’s

web sites, You agree to all of the terms and conditions

of the web sites including the “Terms of Use” located at

the web site you are using, as applicable and as amended

from time to time.

Software Licenses

The software licenses applicable to software from Cisco

are made available at the Cisco public web site at: www.

myciscohome.com and www.myciscohome.com/gpl/

respectively. For Your convenience of reference, a copy

of the Cisco Software License Agreement and the main

open source code licenses used by Cisco in its products

are contained in the Schedules below.

Schedule 1

Cisco Software License Agreement

License. Subject to the terms and conditions of this

Agreement and compliance therewith, Cisco grants You

(provided You are the original end user purchaser of

the Cisco product including the Software) a personal,

non-commercial, nontransferable, non-sublicensable,

nonexclusive license to (i) use the Software and

accompanying Documentation (each as defined below)

for Your personal non-commercial use only, in object code

form only, and only in accordance with the accompanying

Documentation; (ii) use the Software solely as embedded

in, as a stand-alone application or (where authorized in

the applicable Documentation) for communication with

such product, each solely at Cisco’s discretion; (iii) if the

Software is purchased separately from any Cisco product,

install the Software on personal computers within a

single household or business location according to the

maximum number of licenses You have purchased; and (iv)

make one copy of the Software in machine-readable form

and one copy of the Documentation, solely for backup

purposes. This license may not be sublicensed, and is

not transferable except to a person or entity to which

You transfer ownership of the complete Cisco product

containing the Software or complete Software product,

provided You permanently transfer all rights under this

Agreement and do not retain any full or partial copies of

the Software, and the recipient agrees to the terms of this

Agreement.

Service Access. Subject to the terms and conditions of

this Agreement, Cisco may make available certain services

through the use of the Software, as described more fully

in the Software (“Services”), solely for Your own use, and

not for the use or benefit of any third party. Cisco may

change, suspend or discontinue the Software and Services

at any time, including the availability of any feature,

functionality, or content without notice or liability. Cisco

may also impose limits on certain features and services or

restrict Your access to parts or all of the Services without

notice or liability.

Appendix E: Software End User License Agreement

“Software” includes, and this Agreement will apply to (a)

the software of Cisco or its suppliers purchased separately

or provided in or with the applicable Cisco product, and

(b) any upgrades, updates, bug fixes or modified versions

(“Upgrades”) or backup copies of the Software supplied

to You by Cisco or an authorized reseller (whether or not

for a fee), provided You already hold a valid license to the

original software and have paid any applicable fee for the

Upgrade.

“Documentation” means all documentation and other

related materials supplied by Cisco to You pursuant to this

Agreement.

“Technology” shall mean the Software and Services

collectively.

License Restrictions. Other than as set forth in this

Agreement, You may not, nor permit anyone else to,

directly or indirectly (i) make, distribute, or, except in

connection with the use of Your Cisco product, copy the

Software or its related Documentation, or electronically

transfer the Software or Documentation from one

computer to another or over a network; (ii) alter, merge,

modify, adapt, decrypt or translate the Software or

related Documentation, or decompile, reverse engineer,

disassemble, or otherwise reduce or attempt to reduce

the Software to a human-perceivable form (except to

the extent expressly permitted by law notwithstanding

this provision or except to the extent that Cisco is legally

required to permit such specific activity pursuant to any

applicable open source license); (iii) share, sell, rent, lease,

or sublicense the Software or related Documentation;

(iv) modify the Software or create derivative works based

upon the Software; (v) if You make a backup copy of the

Software and Documentation, You must reproduce all

on the original Software and Documentation; (vi) use the

Technology for management of a business network with

more than 8 computers; (vii) use the Software under

any circumstances for competitive evaluation, including

developing competing software; (ix) to the extent

permitted under applicable law, assign, sublicense or

otherwise transfer the Technology unless the prospective

assignee, sublicensee or transferee expressly agrees to all

the terms and conditions under this Agreement.

The Technology and Documentation contain trade secrets

and/or copyrighted materials of Cisco or its suppliers. You

will not disclose or make available such trade secrets or

copyrighted material in any form to any third party.

In the event that You fail to comply with this Agreement,

the license granted to You will automatically terminate,

at which time You must immediately (i) stop using the

Technology and the Cisco product in which the Software

is embedded, or (ii) uninstall the Software and destroy

all copies of the Software and Documentation where the

Technology is purchased separately. All other rights of

both parties and all other provisions of this Agreement

will survive this termination.

Ownership. The Technology and Documentation are

licensed and not sold to You by Cisco and the relevant

third parties set forth in Schedule 2. Cisco, its suppliers

and its licensors respectively retain all right, title and

interest, including all copyright and intellectual property

rights, in and to, the Technology and Documentation

and all copies, derivatives and portions thereof. All

rights not specifically granted to You in this Agreement

are reserved by Cisco and its licensors. Your use of any

software product from an entity other than Cisco that may

have been recommended by Cisco is governed by such

software product’s end user license agreement.

Third Party Services, Links and Advertising. Cisco may

provide from within the Software links to web sites or

third party software products. In addition, third party

Services may be provided with the Software which may be

subject to terms and conditions from the provider of the

Service. Cisco makes no representations as to the quality,

suitability, functionality, or legality of any sites or products

to which links may be provided or third party Services,

and You hereby waive any claim You might have against

Cisco with respect to such sites or third party software

products or Services. Your correspondence or business

dealings with, or participation in promotions of third

parties found through the Software and any other terms,

conditions, warranties, or representations associated with

such dealings, are solely between You and such third

party. You agree that Cisco is not responsible or liable for

any loss or damage of any sort incurred as the result of any

such dealings or as the result of the presence of such third

party links, products or services in the Cisco Software,

and Cisco may discontinue or modify the Services or links

offered at any time.

Collection and Processing of Information. You agree

that Cisco and/or its affiliates may, from time to time,

collect and process information about Your Cisco product

and/or the Software and/or Your use of either in order

(i) to enable Cisco to offer You Upgrades; (ii) to provide

support and assistance with Your product and/or the

Software; (iii) to ensure that Your Cisco product and/or

the Software is being used in accordance with the terms

of this Agreement; (iv) to provide improvements to the

way Cisco delivers technology to You and to other Cisco

customers; (v) to provide reports regarding the status

and health of the network, including network traffic and

application usage; (vi) to enable Cisco to comply with

the terms of any agreements it has with any third parties

regarding Your Cisco product and/or Software; and/or (vii)

to enable Cisco to comply with all applicable laws and/

or regulations, or the requirements of any regulatory

authority or government agency. Cisco and/ or its affiliates

may collect and process this information provided that it

does not identify You personally. You agree that Cisco has

no responsibility or liability for the deletion of or failure to

store any data or other information related to Your Cisco

product, Software or related Services.

Appendix E: Software End User License Agreement

In addition, Cisco may collect and store detailed

information regarding Your network configuration

and usage for the purpose of providing You technical

networking support. The information is associated with

You only when You provide a unique ID number to the

support representative while You are receiving help. The

unique ID is generated randomly on Your computer upon

installation and is completely under Your control.

EXCEPT AS OTHERWISE PROVIDED FOR IN THIS

AGREEMENT, CISCO HAS NO OBLIGATION OF

CONFIDENTIALITY OR (EXCEPT TO THE EXTENT REQUIRED

BY THE APPLICABLE DATA PROTECTION LAWS) PRIVACY OF

ANY COMMUNICATION OR INFORMATION TRANSMITTED

USING THE TECHNOLOGY. Cisco will not be liable for the

privacy of e-mail addresses, registration and identification

information, disk space, communications, confidential

or trade-secret information stored on equipment,

transmitted over networks accessed by the Technology,

or otherwise connected with Your use of the Technology.

Your use of Your Cisco product and/or the Technology

constitutes consent by You to Cisco’s and/or its affiliates’

collection and use of such information and, for Canadian

or European Economic Area (EEA) customers, to the

transfer of such information to a location outside Canada

or the EEA. Any information collected by Your Cisco

product and/or the Software is done and utilized in

accordance with our Privacy Policy available at http://

www.myciscohome.com/privacy. Your election to

use the Cisco product and/or Technology indicates Your

acceptance and consent to Cisco’s use of Your personal

data in accordance with the terms of the Cisco Privacy

Policy, so please review the policy carefully and check the

web site above to review updates to it.

Support; Equipment. This Agreement does not entitle

You to any support, upgrades, patches, enhancements,

or fixes (collectively, “Support”) for the Technology. Any

such Support for the Technology that may be made

available by Cisco, in its sole discretion, shall become

part of the Technology and subject to this Agreement.

You shall be responsible for obtaining and maintaining

any equipment or ancillary services needed to connect

to, access, or otherwise use the Technology, including,

without limitation, modems, hardware, software, and

long distance or local telephone service. You shall be

responsible for ensuring that such equipment or ancillary

services are compatible with the Technology.

Software Upgrades etc. If the Software enables You to

receive Upgrades, You may elect at any time to receive

these Upgrades either automatically or manually. If You

elect to receive Upgrades manually or You otherwise

elect not to receive or be notified of any Upgrades, You

may expose Your Cisco product and/or the Software to

serious security threats and/or some features within Your

Cisco product and/or Software may become inaccessible.

There may be circumstances where we apply an Upgrade

automatically in order to comply with changes in

legislation, legal, security or regulatory requirements or

as a result of requirements to comply with the terms of

any agreements Cisco has with any third parties regarding

Your Cisco product and/or the Software. You will always

be notified of any Upgrades being delivered to You. In

addition, Cisco reserves the right to Upgrade our user

interface with or without notice to You. The terms of this

license will apply to any such Upgrade unless the Upgrade

in question is accompanied by a separate license, in which

event the terms of that license will apply.

Term and Termination. You may terminate this License

at any time by destroying all copies of the Software

and documentation. Your rights under this License will

terminate immediately without notice from Cisco if You

fail to comply with any provision of this Agreement.

Limited Warranty. Cisco additionally warrants that any

media on which the Software may be provided will be

free from defects in materials and workmanship under

normal use for a period of ninety (90) days from the date

of original purchase. Your exclusive remedy and Cisco’s

entire liability under this limited warranty will be for Cisco,

at its option, to (a) replace the Software media, or (b)

refund the purchase price of the Software media.

EXCEPT FOR THE WRITTEN LIMITED WARRANTY ON

MEDIA SET FORTH ABOVE AND PROVIDED IN YOUR

CISCO PRODUCT PACKAGING WITH THE PURCHASE OF

THE RELEVANT CISCO PRODUCT AND TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, ALL SOFTWARE

AND SERVICES PROVIDED BY CISCO ARE PROVIDED “AS

IS” WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY

KIND. Without limiting the foregoing, Cisco does not

warrant that the operation of the product, software or

services will be uninterrupted, bug free or error free. Also,

due to the continual development of new techniques for

intruding upon and attacking networks, Cisco does not

warrant that the product, software or services, or any

equipment, system or network on which the product,

software or services are used will be free of vulnerability

to intrusion or attack. The product may include or be

bundled with third party software or service offerings.

This limited warranty shall not apply to such third party

software or service offerings. This limited warranty does

not guarantee any continued availability of a third party’s

service for which this product’s use or operation may

require.

CISCO DOES NOT AND CANNOT WARRANT THE RESULTS

YOU MAY OBTAIN BY USING THE TECHNOLOGY. THIS

SECTION CONSTITUTES AN ESSENTIAL PART OF THE

AGREEMENT, AND THE FOREGOING DISCLAIMERS ALSO

APPLY WITH RESPECT TO CISCO, THEIR DISTRIBUTORS,

CONTRACTORS AND AGENTS. Further, Cisco has no

special relationship with or fiduciary duty to You. You

acknowledge that Cisco has no control over, and no duty

to take any action regarding: which users gain access to

the Technology. The Technology may contain, or enable

You to access, information that some people may find

offensive or inappropriate. Cisco makes no representations

concerning any content contained in or accessed through

Appendix E: Software End User License Agreement

the Technology, and Cisco will not be responsible or

liable for the accuracy, copyright compliance, legality or

decency of material contained in or accessed through the

Technology.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE

LAW, ALL IMPLIED WARRANTIES AND CONDITIONS

OF MERCHANTABILITY, SATISFACTORY QUALITY,

NONINFRINGEMENT OR FITNESS FOR A PARTICULAR

PURPOSE ARE LIMITED TO THE DURATION OF THE

WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED

CONDITIONS, REPRESENTATIONS AND WARRANTIES ARE

DISCLAIMED. Some jurisdictions do not allow limitations

on how long an implied warranty lasts, so the above

limitation may not apply to You. This limited warranty

gives You specific legal rights, and You may also have

other rights which vary by jurisdiction.

Disclaimer of Liabilities. TO THE EXTENT NOT PROHIBITED

BY APPLICABLE LAW, IN NO EVENT WILL CISCO BE LIABLE

FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL,

INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE

DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY

(INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED

TO THE USE OF OR INABILITY TO USE THE PRODUCT,

SOFTWARE OR ANY SERVICES PROVIDED IN RESPECT

OF SUCH PRODUCT OR SOFTWARE, EVEN IF CISCO HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,

IN NO EVENT WILL CISCO’S LIABILITY EXCEED THE

AMOUNT PAID BY YOU FOR THE PRODUCT. IF YOU LIVE

IN THE EUROPEAN UNION, REFERENCES TO “SPECIAL,

INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL

DAMAGES” SHALL MEAN ANY LOSSES WHICH (i) WERE

NOT REASONABLY FORESEEABLE BY BOTH PARTIES, AND/

OR (ii) WERE KNOWN TO YOU BUT NOT TO US AND/OR (iii)

WERE REASONABLY FORESEEABLE BY BOTH PARTIES BUT

COULD HAVE BEEN PREVENTED BY YOU SUCH AS, FOR

EXAMPLE (BUT WITHOUT LIMITATION), LOSSES CAUSED

BY VIRUSES, TROJANS OR OTHER MALICIOUS PROGRAMS,

OR LOSS OF OR DAMAGE TO YOUR DATA. THE FOREGOING

LIMITATIONS WILL APPLY WITH RESPECT TO CISCO, ITS

DISTRIBUTORS, CONTRACTORS, AND AGENTS AND EVEN

IF ANY WARRANTY OR REMEDY PROVIDED UNDER THIS

LIMITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE.

NOTHING IN THIS SECTION SHALL LIMIT THE LIABILITY OF

CISCO OR ITS DISTRIBUTORS, CONTRACTORS OR AGENTS

IN RELATION TO DEATH OR PERSONAL INJURIES CAUSED

BY THEIR NEGLIGENCE.

Indemnity. You agree that Cisco and its distributors,

partners, contractors and agents shall have no liability

whatsoever for any use You make of the Technology.

You shall indemnify and hold harmless Cisco and its

distributors, partners, contractors and agents from

any claims, damages, losses, liabilities, costs and fees

(including reasonable attorney fees) arising from Your use

of the Technology as well as from Your failure to comply

with any term of this Agreement.

Technical Support. This limited warranty is neither a

service nor a support contract. Information about Cisco’s

current technical support offerings and policies (including

any fees for support services) can be found at www.

myciscohome.com/support.

Export. Software, including technical data, may be

subject to U.S. export control laws and regulations and/or

export or import regulations in other countries. You agree

to comply strictly with all such laws and regulations.

U.S. Government Users. The Software and Documentation

qualify as “commercial items” as defined at 48 C.F.R. 2.101

and 48 C.F.R. 12.212. All Government users acquire the

Software and Documentation with only those rights

herein that apply to non-governmental customers. Use of

either the Software or Documentation or both constitutes

agreement by the Government that the Software and

Documentation are “commercial computer software”

and “commercial computer software documentation,”

and constitutes acceptance of the rights and restrictions

herein.

General Terms. This Agreement will be governed by and

construed in accordance with the laws of the State of

California, without reference to conflict of laws principles.

The United Nations Convention on Contracts for the

International Sale of Goods will not apply. If any portion

of this Agreement is found to be void or unenforceable,

the remaining provisions will remain in full force and

effect. Each party recognizes and agrees that the

warranty disclaimers and liability and remedy limitations

in this Agreement are material bargained for bases of

this Agreement and that they are reasonable and have

been taken into account and reflected in determining

the consideration to be given by each party under this

Agreement and in the decision by each party to enter

into this Agreement. Cisco’s distributors, contractors

and agents are intended third party beneficiaries under

this Agreement. This Agreement constitutes the entire

agreement between the parties with respect to the

Software and supersedes any conflicting or additional

terms contained in any purchase order or elsewhere.

Except as set forth in the above “License” Section or

otherwise expressly provided under this Agreement, no

amendment to or modification of this Agreement will be

binding unless in writing and signed by Cisco and You.

Linksys, Cisco and the Cisco Logo and other trademarks

contained in the Software and Documentation are

trademarks or registered trademarks of Linksys, Cisco,

its licensors and third parties, as the case may be. You

may not remove or alter any trademark, trade names,

product names, logo, copyright or other proprietary

notices, legends, symbols or labels in the Software and

Documentation. This Agreement does not authorize

You to use Cisco’s or its licensors’ names or respective

trademarks.

END OF SCHEDULE 1

Appendix E: Software End User License Agreement

Schedule 2

Open Source and Third Party Licenses

Schedule 2-A

If this Cisco product contains open source software

licensed under Version 2 of the “GNU General Public

License” then the license terms below in this Schedule 2-A

will apply to that open source software. The license terms

below in this Schedule 2-A are from the public web site at

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA

Everyone is permitted to copy and distribute verbatim

copies of this license document, but changing it is not

allowed.

Preamble

The licenses for most software are designed to take away

your freedom to share and change it. By contrast, the

GNU General Public License is intended to guarantee your

freedom to share and change free software--to make sure

the software is free for all its users. This General Public

License applies to most of the Free Software Foundation’s

software and to any other program whose authors

commit to using it. (Some other Free Software Foundation

software is covered by the GNU Lesser General Public

License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to

freedom, not price. Our General Public Licenses are

designed to make sure that you have the freedom to

distribute copies of free software (and charge for this

service if you wish), that you receive source code or can

get it if you want it, that you can change the software or

use pieces of it in new free programs; and that you know

you can do these things.

To protect your rights, we need to make restrictions that

forbid anyone to deny you these rights or to ask you to

surrender the rights. These restrictions translate to certain

responsibilities for you if you distribute copies of the

software, or if you modify it.

For example, if you distribute copies of such a program,

whether gratis or for a fee, you must give the recipients

all the rights that you have. You must make sure that they,

too, receive or can get the source code. And you must

show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the

software, and (2) offer you this license which gives you

legal permission to copy, distribute and/or modify the

software.

Also, for each author’s protection and ours, we want to

make certain that everyone understands that there is no

warranty for this free software. If the software is modified

by someone else and passed on, we want its recipients

to know that what they have is not the original, so that

any problems introduced by others will not reflect on the

original authors’ reputations.

Finally, any free program is threatened constantly by

software patents. We wish to avoid the danger that

redistributors of a free program will individually obtain

patent licenses, in effect making the program proprietary.

To prevent this, we have made it clear that any patent

must be licensed for everyone’s free use or not licensed

at all.

The precise terms and conditions for copying, distribution

and modification follow.

TERMS AND CONDITIONS FOR COPYING,

DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work

which contains a notice placed by the copyright

holder saying it may be distributed under the terms

of this General Public License. The “Program”, below,

refers to any such program or work, and a “work based

on the Program” means either the Program or any

derivative work under copyright law: that is to say, a

work containing the Program or a portion of it, either

verbatim or with modifications and/or translated into

another language. (Hereinafter, translation is included

without limitation in the term “modification”.) Each

licensee is addressed as “you”.

Activities other than copying, distribution and

modification are not covered by this License; they

are outside its scope. The act of running the Program

is not restricted, and the output from the Program is

covered only if its contents constitute a work based on

the Program (independent of having been made by

running the Program). Whether that is true depends

on what the Program does.

1. You may copy and distribute verbatim copies of the

Program’s source code as you receive it, in any medium,

provided that you conspicuously and appropriately

publish on each copy an appropriate copyright notice

and disclaimer of warranty; keep intact all the notices

that refer to this License and to the absence of any

warranty; and give any other recipients of the Program

a copy of this License along with the Program.

You may charge a fee for the physical act of transferring

a copy, and you may at your option offer warranty

protection in exchange for a fee.

2. You may modify your copy or copies of the Program

or any portion of it, thus forming a work based on the

Program, and copy and distribute such modifications

or work under the terms of Section 1 above, provided

that you also meet all of these conditions:

Appendix E: Software End User License Agreement

a. You must cause the modified files to carry

prominent notices stating that you changed the

files and the date of any change.

b. You must cause any work that you distribute or

publish, that in whole or in part contains or is

derived from the Program or any part thereof, to be

licensed as a whole at no charge to all third parties

under the terms of this License.

c. If the modified program normally reads commands

interactively when run, you must cause it, when

started running for such interactive use in the most

ordinary way, to print or display an announcement

including an appropriate copyright notice and

a notice that there is no warranty (or else, saying

that you provide a warranty) and that users may

redistribute the program under these conditions,

and telling the user how to view a copy of

this License. (Exception: if the Program itself is

interactive but does not normally print such an

announcement, your work based on the Program

is not required to print an announcement.)

These requirements apply to the modified work as

a whole. If identifiable sections of that work are not

derived from the Program, and can be reasonably

considered independent and separate works in

themselves, then this License, and its terms, do not

apply to those sections when you distribute them as

separate works. But when you distribute the same

sections as part of a whole which is a work based on

the Program, the distribution of the whole must be on

the terms of this License, whose permissions for other

licensees extend to the entire whole, and thus to each

and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights

or contest your rights to work written entirely by you;

rather, the intent is to exercise the right to control the

distribution of derivative or collective works based on

the Program.

In addition, mere aggregation of another work not

based on the Program with the Program (or with a

work based on the Program) on a volume of a storage

or distribution medium does not bring the other work

under the scope of this License.

3. You may copy and distribute the Program (or a

work based on it, under Section 2) in object code or

executable form under the terms of Sections 1 and 2

above provided that you also do one of the following:

a. Accompany it with the complete corresponding

machine-readable source code, which must be

distributed under the terms of Sections 1 and 2

above on a medium customarily used for software

interchange; or,

b. Accompany it with a written offer, valid for at least

three years, to give any third party, for a charge

no more than your cost of physically performing

source distribution, a complete machine-readable

copy of the corresponding source code, to be

distributed under the terms of Sections 1 and 2

above on a medium customarily used for software

interchange; or,

c. Accompany it with the information you received as

to the offer to distribute corresponding source code.

(This alternative is allowed only for noncommercial

distribution and only if you received the program

in object code or executable form with such an

offer, in accord with Subsection b above.)

The source code for a work means the preferred form

of the work for making modifications to it. For an

executable work, complete source code means all

the source code for all modules it contains, plus any

associated interface definition files, plus the scripts

used to control compilation and installation of the

executable. However, as a special exception, the source

code distributed need not include anything that is

normally distributed (in either source or binary form)

with the major components (compiler, kernel, and so

on) of the operating system on which the executable

runs, unless that component itself accompanies the

executable.

If distribution of executable or object code is made

by offering access to copy from a designated place,

then offering equivalent access to copy the source

code from the same place counts as distribution of

the source code, even though third parties are not

compelled to copy the source along with the object

code.

4. You may not copy, modify, sublicense, or distribute

the Program except as expressly provided under

this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will

automatically terminate your rights under this License.

However, parties who have received copies, or rights,

from you under this License will not have their licenses

terminated so long as such parties remain in full

compliance.

5. You are not required to accept this License, since you

have not signed it. However, nothing else grants you

permission to modify or distribute the Program or

its derivative works. These actions are prohibited by

law if you do not accept this License. Therefore, by

modifying or distributing the Program (or any work

based on the Program), you indicate your acceptance

of this License to do so, and all its terms and conditions

for copying, distributing or modifying the Program or

works based on it.

Appendix E: Software End User License Agreement

6. Each time you redistribute the Program (or any work

based on the Program), the recipient automatically

receives a license from the original licensor to copy,

distribute or modify the Program subject to these

terms and conditions. You may not impose any further

restrictions on the recipients’ exercise of the rights

granted herein. You are not responsible for enforcing

compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation

of patent infringement or for any other reason (not

limited to patent issues), conditions are imposed on

you (whether by court order, agreement or otherwise)

that contradict the conditions of this License, they do

not excuse you from the conditions of this License. If

you cannot distribute so as to satisfy simultaneously

your obligations under this License and any other

pertinent obligations, then as a consequence you

may not distribute the Program at all. For example,

if a patent license would not permit royalty-free

redistribution of the Program by all those who receive

copies directly or indirectly through you, then the only

way you could satisfy both it and this License would

be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or

unenforceable under any particular circumstance,

the balance of the section is intended to apply and

the section as a whole is intended to apply in other

circumstances.

It is not the purpose of this section to induce you to

infringe any patents or other property right claims or

to contest validity of any such claims; this section has

the sole purpose of protecting the integrity of the free

software distribution system, which is implemented

by public license practices. Many people have

made generous contributions to the wide range of

software distributed through that system in reliance

on consistent application of that system; it is up to

the author/donor to decide if he or she is willing to

distribute software through any other system and a

licensee cannot impose that choice.

This section is intended to make thoroughly clear

what is believed to be a consequence of the rest of this

License.

8. If the distribution and/or use of the Program is

restricted in certain countries either by patents or by

copyrighted interfaces, the original copyright holder

who places the Program under this License may add an

explicit geographical distribution limitation excluding

those countries, so that distribution is permitted only

in or among countries not thus excluded. In such case,

this License incorporates the limitation as if written in

the body of this License.

9. The Free Software Foundation may publish revised

and/or new versions of the General Public License

from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to

address new problems or concerns.

Each version is given a distinguishing version number.

If the Program specifies a version number of this

License which applies to it and “any later version”, you

have the option of following the terms and conditions

either of that version or of any later version published

by the Free Software Foundation. If the Program does

not specify a version number of this License, you

may choose any version ever published by the Free

Software Foundation.

10. If you wish to incorporate parts of the Program into

other free programs whose distribution conditions are

different, write to the author to ask for permission. For

software which is copyrighted by the Free Software

Foundation, write to the Free Software Foundation;

we sometimes make exceptions for this. Our decision

will be guided by the two goals of preserving the free

status of all derivatives of our free software and of

promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF

CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,

TO THE EXTENT PERMITTED BY APPLICABLE LAW.

EXCEPT WHEN OTHERWISE STATED IN WRITING THE

PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE

QUALITY AND PERFORMANCE OF THE PROGRAM IS

WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,

YOU ASSUME THE COST OF ALL NECESSARY SERVICING,

REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW

OR AGREED TO IN WRITING WILL ANY COPYRIGHT

HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS

PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,

INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE

USE OR INABILITY TO USE THE PROGRAM (INCLUDING

BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING

RENDERED INACCURATE OR LOSSES SUSTAINED BY

YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM

TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF

SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

END OF SCHEDULE 2-A

Appendix E: Software End User License Agreement

Schedule 2-B

If this Cisco product contains open source software

licensed under Version 2.1 of the “GNU Lesser General

Public License” then the license terms below in this

Schedule 2-B will apply to that open source software.

The license terms below in this Schedule 2-B are from

the public web site at http://www.gnu.org/licenses/old-

licenses/lgpl-2.1.html

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim

copies of this license document, but changing it is not

allowed.

[This is the first released version of the Lesser GPL. It also

counts as the successor of the GNU Library Public License,

version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away

your freedom to share and change it. By contrast, the

GNU General Public Licenses are intended to guarantee

your freedom to share and change free software--to make

sure the software is free for all its users.

This license, the Lesser General Public License, applies

to some specially designated software packages--

typically libraries--of the Free Software Foundation and

other authors who decide to use it. You can use it too,

but we suggest you first think carefully about whether

this license or the ordinary General Public License is the

better strategy to use in any particular case, based on the

explanations below.

When we speak of free software, we are referring to

freedom of use, not price. Our General Public Licenses

are designed to make sure that you have the freedom

to distribute copies of free software (and charge for this

service if you wish); that you receive source code or can

get it if you want it; that you can change the software and

use pieces of it in new free programs; and that you are

informed that you can do these things.

To protect your rights, we need to make restrictions that

forbid distributors to deny you these rights or to ask you

to surrender these rights. These restrictions translate to

certain responsibilities for you if you distribute copies of

the library or if you modify it.

For example, if you distribute copies of the library,

whether gratis or for a fee, you must give the recipients

all the rights that we gave you. You must make sure that

they, too, receive or can get the source code. If you link

other code with the library, you must provide complete

object files to the recipients, so that they can relink them

with the library after making changes to the library and

recompiling it. And you must show them these terms so

they know their rights.

We protect your rights with a two-step method: (1) we

which gives you legal permission to copy, distribute and/

or modify the library.

To protect each distributor, we want to make it very clear

that there is no warranty for the free library. Also, if the

library is modified by someone else and passed on, the

recipients should know that what they have is not the

original version, so that the original author’s reputation

will not be affected by problems that might be introduced

by others.

Finally, software patents pose a constant threat to the

existence of any free program. We wish to make sure

that a company cannot effectively restrict the users of

a free program by obtaining a restrictive license from a

patent holder. Therefore, we insist that any patent license

obtained for a version of the library must be consistent

with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered

by the ordinary GNU General Public License. This license,

the GNU Lesser General Public License, applies to certain

designated libraries, and is quite different from the

ordinary General Public License. We use this license for

certain libraries in order to permit linking those libraries

into non-free programs.

When a program is linked with a library, whether

statically or using a shared library, the combination of

the two is legally speaking a combined work, a derivative

of the original library. The ordinary General Public

License therefore permits such linking only if the entire

combination fits its criteria of freedom. The Lesser General

Public License permits more lax criteria for linking other

code with the library.

We call this license the “Lesser” General Public License

because it does Less to protect the user’s freedom than

the ordinary General Public License. It also provides

other free software developers Less of an advantage over

competing non-free programs. These disadvantages are

the reason we use the ordinary General Public License

for many libraries. However, the Lesser license provides

advantages in certain special circumstances.

For example, on rare occasions, there may be a special

need to encourage the widest possible use of a certain

library, so that it becomes a de-facto standard. To achieve

this, non-free programs must be allowed to use the library.

A more frequent case is that a free library does the same

job as widely used non-free libraries. In this case, there is

little to gain by limiting the free library to free software

only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-

free programs enables a greater number of people to use

a large body of free software. For example, permission to

Appendix E: Software End User License Agreement

use the GNU C Library in non-free programs enables many

more people to use the whole GNU operating system, as

well as its variant, the GNU/Linux operating system.

Although the Lesser General Public License is Less

protective of the users’ freedom, it does ensure that the

user of a program that is linked with the Library has the

freedom and the wherewithal to run that program using a

modified version of the Library.

The precise terms and conditions for copying, distribution

and modification follow. Pay close attention to the

difference between a “work based on the library” and a

“work that uses the library”. The former contains code

derived from the library, whereas the latter must be

combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING,

DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library

or other program which contains a notice placed by

the copyright holder or other authorized party saying

it may be distributed under the terms of this Lesser

General Public License (also called “this License”). Each

licensee is addressed as “you”.

A “library” means a collection of software functions

and/or data prepared so as to be conveniently linked

with application programs (which use some of those

functions and data) to form executables.

The “Library”, below, refers to any such software library

or work which has been distributed under these terms.

A “work based on the Library” means either the Library

or any derivative work under copyright law: that is

to say, a work containing the Library or a portion

of it, either verbatim or with modifications and/or

translated straightforwardly into another language.

(Hereinafter, translation is included without limitation

in the term “modification”.)

“Source code” for a work means the preferred form of

the work for making modifications to it. For a library,

complete source code means all the source code for

all modules it contains, plus any associated interface

definition files, plus the scripts used to control

compilation and installation of the library.

Activities other than copying, distribution and

modification are not covered by this License; they are

outside its scope. The act of running a program using

the Library is not restricted, and output from such a

program is covered only if its contents constitute a

work based on the Library (independent of the use

of the Library in a tool for writing it). Whether that is

true depends on what the Library does and what the

program that uses the Library does.

1. You may copy and distribute verbatim copies of the

Library’s complete source code as you receive it, in

any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate

intact all the notices that refer to this License and to

the absence of any warranty; and distribute a copy of

this License along with the Library.

You may charge a fee for the physical act of transferring

a copy, and you may at your option offer warranty

protection in exchange for a fee.

2. You may modify your copy or copies of the Library or

any portion of it, thus forming a work based on the

Library, and copy and distribute such modifications

or work under the terms of Section 1 above, provided

that you also meet all of these conditions:

a. The modified work must itself be a software library.

b. You must cause the files modified to carry

prominent notices stating that you changed the

files and the date of any change.

c. You must cause the whole of the work to be

licensed at no charge to all third parties under the

terms of this License.

d. If a facility in the modified Library refers to a

function or a table of data to be supplied by an

application program that uses the facility, other

than as an argument passed when the facility is

invoked, then you must make a good faith effort

to ensure that, in the event an application does

not supply such function or table, the facility

still operates, and performs whatever part of its

purpose remains meaningful.

(For example, a function in a library to compute square

roots has a purpose that is entirely well-defined

independent of the application. Therefore, Subsection

2d requires that any application-supplied function or

table used by this function must be optional: if the

application does not supply it, the square root function

must still compute square roots.)

These requirements apply to the modified work as

a whole. If identifiable sections of that work are not

derived from the Library, and can be reasonably

considered independent and separate works in

themselves, then this License, and its terms, do not

apply to those sections when you distribute them as

separate works. But when you distribute the same

sections as part of a whole which is a work based on

the Library, the distribution of the whole must be on

the terms of this License, whose permissions for other

licensees extend to the entire whole, and thus to each

and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights

or contest your rights to work written entirely by you;

rather, the intent is to exercise the right to control the

Appendix E: Software End User License Agreement

distribution of derivative or collective works based on

the Library.

In addition, mere aggregation of another work not

based on the Library with the Library (or with a work

based on the Library) on a volume of a storage or

distribution medium does not bring the other work

under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU

General Public License instead of this License to a

given copy of the Library. To do this, you must alter all

the notices that refer to this License, so that they refer

to the ordinary GNU General Public License, version

2, instead of to this License. (If a newer version than

version 2 of the ordinary GNU General Public License

has appeared, then you can specify that version

instead if you wish.) Do not make any other change

in these notices.

Once this change is made in a given copy, it is

irreversible for that copy, so the ordinary GNU General

Public License applies to all subsequent copies and

derivative works made from that copy.

This option is useful when you wish to copy part of the

code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion

or derivative of it, under Section 2) in object code or

executable form under the terms of Sections 1 and

2 above provided that you accompany it with the

complete corresponding machine-readable source

code, which must be distributed under the terms of

Sections 1 and 2 above on a medium customarily used

for software interchange.

If distribution of object code is made by offering

access to copy from a designated place, then offering

equivalent access to copy the source code from the

same place satisfies the requirement to distribute

the source code, even though third parties are not

compelled to copy the source along with the object

code.

5. A program that contains no derivative of any portion

of the Library, but is designed to work with the Library

by being compiled or linked with it, is called a “work

that uses the Library”. Such a work, in isolation, is not

a derivative work of the Library, and therefore falls

outside the scope of this License.

However, linking a “work that uses the Library” with

the Library creates an executable that is a derivative

of the Library (because it contains portions of the

Library), rather than a “work that uses the library”. The

executable is therefore covered by this License. Section

6 states terms for distribution of such executables.

When a “work that uses the Library” uses material from

a header file that is part of the Library, the object code

for the work may be a derivative work of the Library

even though the source code is not. Whether this is

true is especially significant if the work can be linked

without the Library, or if the work is itself a library. The

threshold for this to be true is not precisely defined by

law.

If such an object file uses only numerical parameters,

data structure layouts and accessors, and small

macros and small inline functions (ten lines or less in

length), then the use of the object file is unrestricted,

regardless of whether it is legally a derivative work.

(Executables containing this object code plus portions

of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you

may distribute the object code for the work under the

terms of Section 6. Any executables containing that

work also fall under Section 6, whether or not they are

linked directly with the Library itself.

6. As an exception to the Sections above, you may also

combine or link a “work that uses the Library” with the

Library to produce a work containing portions of the

Library, and distribute that work under terms of your

choice, provided that the terms permit modification

of the work for the customer’s own use and reverse

engineering for debugging such modifications.

You must give prominent notice with each copy of

the work that the Library is used in it and that the

Library and its use are covered by this License. You

must supply a copy of this License. If the work during

execution displays copyright notices, you must include

the copyright notice for the Library among them, as

well as a reference directing the user to the copy of this

License. Also, you must do one of these things:

a. Accompany the work with the complete

corresponding machine-readable source code

for the Library including whatever changes were

used in the work (which must be distributed

under Sections 1 and 2 above); and, if the work

is an executable linked with the Library, with the

complete machine-readable “work that uses the

Library”, as object code and/or source code, so that

the user can modify the Library and then relink

to produce a modified executable containing the

modified Library. (It is understood that the user

who changes the contents of definitions files in the

Library will not necessarily be able to recompile

the application to use the modified definitions.)

b. Use a suitable shared library mechanism for linking

with the Library. A suitable mechanism is one that

(1) uses at run time a copy of the library already

present on the user’s computer system, rather than

copying library functions into the executable, and

(2) will operate properly with a modified version of

the library, if the user installs one, as long as the

modified version is interface-compatible with the

version that the work was made with.

Appendix E: Software End User License Agreement

c. Accompany the work with a written offer, valid

for at least three years, to give the same user the

materials specified in Subsection 6a, above, for a

charge no more than the cost of performing this

distribution.

d. If distribution of the work is made by offering access

to copy from a designated place, offer equivalent

access to copy the above specified materials from

the same place.

e. Verify that the user has already received a copy of

these materials or that you have already sent this

user a copy.

For an executable, the required form of the “work that

uses the Library” must include any data and utility

programs needed for reproducing the executable

from it. However, as a special exception, the materials

to be distributed need not include anything that is

normally distributed (in either source or binary form)

with the major components (compiler, kernel, and so

on) of the operating system on which the executable

runs, unless that component itself accompanies the

executable.

It may happen that this requirement contradicts the

license restrictions of other proprietary libraries that

do not normally accompany the operating system.

Such a contradiction means you cannot use both

them and the Library together in an executable that

you distribute.

7. You may place library facilities that are a work based

on the Library side-by-side in a single library together

with other library facilities not covered by this License,

and distribute such a combined library, provided that

the separate distribution of the work based on the

Library and of the other library facilities is otherwise

permitted, and provided that you do these two things:

a. Accompany the combined library with a copy of

the same work based on the Library, uncombined

with any other library facilities. This must be

distributed under the terms of the Sections above.

b. Give prominent notice with the combined library of

the fact that part of it is a work based on the Library,

and explaining where to find the accompanying

uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or

distribute the Library except as expressly provided

under this License. Any attempt otherwise to copy,

modify, sublicense, link with, or distribute the Library

is void, and will automatically terminate your rights

under this License. However, parties who have

received copies, or rights, from you under this License

will not have their licenses terminated so long as such

parties remain in full compliance.

9. You are not required to accept this License, since you

have not signed it. However, nothing else grants

you permission to modify or distribute the Library

or its derivative works. These actions are prohibited

by law if you do not accept this License. Therefore,

by modifying or distributing the Library (or any work

based on the Library), you indicate your acceptance of

this License to do so, and all its terms and conditions

for copying, distributing or modifying the Library or

works based on it.

10. Each time you redistribute the Library (or any work

based on the Library), the recipient automatically

receives a license from the original licensor to copy,

distribute, link with or modify the Library subject

to these terms and conditions. You may not impose

any further restrictions on the recipients’ exercise of

the rights granted herein. You are not responsible

for enforcing compliance by third parties with this

License.

11. If, as a consequence of a court judgment or allegation

of patent infringement or for any other reason (not

limited to patent issues), conditions are imposed on

you (whether by court order, agreement or otherwise)

that contradict the conditions of this License, they do

not excuse you from the conditions of this License. If

you cannot distribute so as to satisfy simultaneously

your obligations under this License and any other

pertinent obligations, then as a consequence you may

not distribute the Library at all. For example, if a patent

license would not permit royalty-free redistribution of

the Library by all those who receive copies directly or

indirectly through you, then the only way you could

satisfy both it and this License would be to refrain

entirely from distribution of the Library.

If any portion of this section is held invalid or

unenforceable under any particular circumstance,

the balance of the section is intended to apply, and

the section as a whole is intended to apply in other

circumstances.

It is not the purpose of this section to induce you to

infringe any patents or other property right claims or

to contest validity of any such claims; this section has

the sole purpose of protecting the integrity of the free

software distribution system which is implemented

by public license practices. Many people have

made generous contributions to the wide range of

software distributed through that system in reliance

on consistent application of that system; it is up to

the author/donor to decide if he or she is willing to

distribute software through any other system and a

licensee cannot impose that choice.

This section is intended to make thoroughly clear

what is believed to be a consequence of the rest of this

License.

Appendix E: Software End User License Agreement

12. If the distribution and/or use of the Library is restricted

in certain countries either by patents or by copyrighted

interfaces, the original copyright holder who places

the Library under this License may add an explicit

geographical distribution limitation excluding those

countries, so that distribution is permitted only in or

among countries not thus excluded. In such case, this

License incorporates the limitation as if written in the

body of this License.

13. The Free Software Foundation may publish revised

and/or new versions of the Lesser General Public

License from time to time. Such new versions will be

similar in spirit to the present version, but may differ in

detail to address new problems or concerns.

Each version is given a distinguishing version number.

If the Library specifies a version number of this License

which applies to it and “any later version”, you have the

option of following the terms and conditions either of

that version or of any later version published by the

Free Software Foundation. If the Library does not

specify a license version number, you may choose

any version ever published by the Free Software

Foundation.

14. If you wish to incorporate parts of the Library into

other free programs whose distribution conditions are

incompatible with these, write to the author to ask for

permission. For software which is copyrighted by the

Free Software Foundation, write to the Free Software

Foundation; we sometimes make exceptions for

this. Our decision will be guided by the two goals of

preserving the free status of all derivatives of our free

software and of promoting the sharing and reuse of

software generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,

THERE IS NO WARRANTY FOR THE LIBRARY, TO THE

EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT

WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT

HOLDERS AND/OR OTHER PARTIES PROVIDE THE

LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD

THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE

COST OF ALL NECESSARY SERVICING, REPAIR OR

CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW

OR AGREED TO IN WRITING WILL ANY COPYRIGHT

HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY

AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED

ABOVE, BE LIABLE TO YOU FOR DAMAGES,

INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE

USE OR INABILITY TO USE THE LIBRARY (INCLUDING

BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING

RENDERED INACCURATE OR LOSSES SUSTAINED BY

YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY

TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF

SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

END OF SCHEDULE 2-B

Schedule 2-C

OPENSSL LICENSE

If this Cisco product contains open source software

licensed under the OpenSSL license:

This product includes software developed by the OpenSSL

Project for use in the OpenSSL Toolkit. (http://www.

openssl.org/).

This product includes cryptographic software written by

Eric Young (eay@cryptsoft.com).

This product includes software written by Tim Hudson

(tjh@cryptsoft.com).

In addition, if this Cisco product contains open source

software licensed under the OpenSSL license then the

license terms below in this Schedule 2-C will apply to that

open source software. The license terms below in this

Schedule 2-C are from the public web site at http://www.

openssl.org/source/license.html.

The OpenSSL toolkit stays under a dual license, i.e. both

the conditions of the OpenSSL License and the original

SSLeay license apply to the toolkit. See below for the

actual license texts. Actually both licenses are BSD-style

Open Source licenses. In case of any license issues related

to OpenSSL please contact openssl-core@openssl.org.

OpenSSL License

reserved.

Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

1. Redistributions of source code must retain the above

following disclaimer.

Appendix E: Software End User License Agreement

2. Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or

use of this software must display the following

acknowledgment: “This product includes software

developed by the OpenSSL Project for use in the

OpenSSL Toolkit. (http://www.openssl.org/)”

4. The names “OpenSSL Toolkit” and “OpenSSL Project”

must not be used to endorse or promote products

derived from this software without prior written

permission. For written permission, please contact

openssl-core@openssl.org.

5. Products derived from this software may not be called

“OpenSSL” nor may “OpenSSL” appear in their names

without prior written permission of the OpenSSL

Project.

6. Redistributions of any form whatsoever must retain the

following acknowledgment: “This product includes

software developed by the OpenSSL Project for use in

the OpenSSL Toolkit (http://www.openssl.org/)”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT

”AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE.

This product includes cryptographic software written by

Eric Young (eay@cryptsoft.com). This product includes

software written by Tim Hudson (tjh@cryptsoft.com).

Original SSLeay License

This package is an SSL implementation written by Eric

Young (eay@cryptsoft.com).

The implementation was written so as to conform with

Netscapes SSL.

This library is free for commercial and non-commercial

use as long as the following conditions are adhered to.

The following conditions apply to all code found in this

distribution, be it the RC4, RSA, lhash, DES, etc., code; not

just the SSL code. The SSL documentation included with

this distribution is covered by the same copyright terms

except that the holder is Tim Hudson (tjh@cryptsoft.com).

notices in the code are not to be removed.

If this package is used in a product, Eric Young should be

given attribution as the author of the parts of the library

used. This can be in the form of a textual message at

program startup or in documentation (online or textual)

provided with the package.

Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

1. Redistributions of source code must retain the

following disclaimer.

2. Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or

use of this software must display the following

acknowledgement:

“This product includes cryptographic software written

by Eric Young (eay@cryptsoft.com)”

The word ‘cryptographic’ can be left out if the routines

from the library being used are not cryptographic

related.

4. If you include any Windows specific code (or a derivative

thereof) from the apps directory (application code)

you must include an acknowledgement: “This product

includes software written by Tim Hudson (tjh@

cryptsoft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS’’ AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The license and distribution terms for any publicly

available version or derivative of this code cannot be

changed. i.e. this code cannot simply be copied and put

under another distribution license [including the GNU

Public License.]

END OF SCHEDULE 2-C

www.ciscovalet.com/support

in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The

use of the word partner does not imply a partnership relationship between Cisco and any other company.

10012010NC-RR

LINKSYS M10V2 Wireless-N Broadband Router User Manual M10 user guide rev

LINKSYS LLC Wireless-N Broadband Router M10 user guide rev

Contents

Manual Part 3

Navigation menu

Namespaces

Views

Navigation