LINKSYS RE9000 WiFi Tri band repeater User Manual 1
LINKSYS LLC WiFi Tri band repeater Users Manual 1
UserManual.wiki
>
LINKSYS
>
RE9000 User Manual
>
Users Manual-1
Contents
1.
Users Manual-1
2.
Users Manual-2
Users Manual-1
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![MAX-STREAM™NEXT-GEN ACTRIBAND AC WiFi RANGE EXTENDERextender.linksys.comPlug the range extender into an electrical outlet close to your router.You can move the range extender to an ideal location later in step 5. After the range extender is plugged in the indicator light on the top will blink green for up to a minute.Wi-Fi Protected Setup (WPS)Setting up as a wireless range extenderGet startedThere are two ways to use your Linksys extender: as a wireless range extender or as a wired range extender (access point). Wireless range extenders boost Wi-Fi range for better coverage and increased signal strength. Wired range extender (access points) create new Wi-Fi hotspots when connected to a router with an Ethernet cable. Both scenarios require a router with a working internet connection.Before starting setup, decide whether you want to use your RE9000 as a wireless range extender or as a wired range extender (access point). Instructions for both setups are in this guide. • The light on the front of the range extender gives you information about power, updating and signal strength. 2Wait for the light on the top of your range extender to blink orange.This can take up to a minute.34Connect to Linksys Extender Setup network.On a computer, phone or tablet, connect to the Wi-Fi network: Linksys Extender Setup.Launch setupEnter http://extender.linksys.com (or try http://92.68..) in a browser to complete setup. Follow the on-screen instructions to select your network to extend, customize your extended network name and password and find the best spot using Spot Finder Technology.Launch setupEnter http://extender.linksys.com (or try http://92.68..) in a browser to complete setup. Be sure to choose “As a wired range extender (access point)” when asked how you want to use your range extender. Follow the on-screen instructions to create a network name and password for your access point.Connect your Wi-Fi devices to the extended network you just created.Select the extended network on your device’s Wi-Fi manager.Use this setup method if you don’t have a WPS button on your router, or if you don’t want to use WPS to set up your RE9000.Frequently asked questions (FAQ)Why can I not find “Linksys Extender Setup” in my Wi-Fi list?Make sure the light on the range extender is blinking orange. If you still can’t see the setup network, move the device being used for setup closer to the range extender. Wait for a blinking orange light and refresh the Wi-Fi list.On browser-based setup, why do I not see the setup screen on http://extender.linksys.com?On your device’s Wi-Fi manager, make sure “Linksys Extender Setup” is selected, then refresh your browser.On browser-based setup, why can I not see my network name on the “Choose your wireless” page?Your range extender might be too far from the router. Move it closer and refresh the list.I correctly entered my network password during browser-based setup. Why does the “Enter your password” page still show an error?The range extender likely is at the outside limit of the router's signal. The signal could be getting interrupted before your password makes it to the router. Move your range extender closer to the router.Why can’t I connect my range extender with WPS?There are a number of reasons that WPS could fail:• Your router and range extender are too far apart• The two-minute connection window expired• The WPS button on either range extender or router did not depress all the way• WPS is disabled on the router• MAC filtering is enabled on the routerHow do I reset the range extender to factory defaults?Press the red reset button on the back of the range extender and hold until the light on the top starts blinking green.Why am I experiencing poor signal and slow speed on my range extender?Be sure that you’ve placed your range extender in an ideal location, as indicated by Spot Finder Technology. NOTE: When you move around your home, your wireless devices may not disconnect from the router until they lose the Wi-Fi signal. This may occur even if the Wi-Fi signal from the range extender signal is stronger (and vice versa). If you are having connection issues, select the network with the stronger signal.For advanced configuration, consult the user guide at linksys.com/support/RE9000.8820-02636 Rev. A0Write down the extended network names and passwords you just created.Extended network names and passwords2.4 GHz password2.4 GHz network name5 GHz network nameRange extender admin passwordWrite down your range extender admin password. You'll need the range extender admin password if you want to access your range extender settings.Admin passwordGet HelpInternet: linksys.com/supportTwitter: @LinksysCaresPhone (US/Canada): 800-326-74 (complimentary support during your warranty period)Plug in the range extender.Plug in the range extender midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of your router’s Wi-Fi signal at that location. If you don’t have two bars, move the range extender closer to the router. You can move the range extender to an ideal location later using the setup software.Browser-based setupWPS is a simple way to connect Wi-Fi devices with Push Button Connect. Routers that support WPS have a button that might look like one of these symbols:NOTE — The WPS button will not work if you have disabled WPS on your router, or if you have chosen WEP as your network security type. In either case, continue with browser-based setup below.Yes Continue with Wi-Fi Protected Setup (WPS) belowNo (or not sure) Continue with Browser-based setup, also in this Quick Start GuideWait for the light on the top of your range extender to blink orange before going to step 3.This can take up to a minute.Move your range extender to an ideal spot.Unplug your range extender and plug it back in midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of your router’s Wi-Fi signal at that location. If you don’t have two bars, move the range extender closer to the router.Accessing your range extender settings after setupWhat’s in this Guide• Your Linksys extender• Get started• Setting up as a wireless range extender• Setting up as a wired range extender (access point)• FAQYour Linksys extenderFront viewYour range extender’s default admin password is “admin”. It is highly recommended that you change this after WPS setup.To change or view range extender settings, first connect to an extended network. If your extended network has the same network name as your main network:• On a computer that is not connected to a wireless network, use an ethernet cable to connect directly to the range extender. Open a browser and go to extender.linksys.com.OR• Connect to your range extender wirelessly. Depending on your operating system, one of the following links will get you to the login page. Choose one and enter it in your browser.Android and Windows: http://RE9000 Mac OS X or iOS: http://RE9000.localIf your extended network has a different network name than your main network (for example mywifi_EXT):Connect to the extended network. In a browser, go to http://extender.linksys.com and enter your admin password.Extend your network. a. Press the WPS button on your router. Within the next two minutes press the WPS button on the side of your range extender.The WPS button will light up and the light on the top of your range extender will blink green.Watch the light on the top of your range extender to verify whether the connection was successful.If it turns solid green , the connection was successful. Move to step 4.If it starts to blink orange , the connection failed. You may try again by repeating step 3 or try browser-based setup.• WPS™ button—Use Wi-Fi Protected Setup to automatically and securely add compatible wireless devices to your network with Push Button Connect.Side view• Ethernet ports ()—Connect wired devices to these ports with ethernet cables.• Reset button (2)—Press and hold until the light on the front of the range extender blinks to reset extender to factory default settings.• Power port (3)—Connect the included AC power adapter.Back view. Ethernet Ports. Reset Button . Power PortDoes your router have a WPS button?Your range extender is now set up. Enjoy your extended Wi-Fi coverage.If you have set up your range extender with a Linksys Max-Stream Router, you don’t have to do anything. Max-Stream routers support seamless roaming, and your extended Wi-Fi network shares the same network name and password as your main 5 GHz band. Connected devices will select the main or extended network as you move around the coverage area.If you do not have a router with seamless roaming, select the extended network on your device's Wi-Fi manager. Extended networks are identified by “Ext” added to the end of your main network name(s). Password(s) will be the same as those for your main network(s).For advanced configuration, consult user guide at linksys.com/support/RE9000.How to connect your Wi-Fi devices to the extended network you just created.5 GHz passwordHow to connect your Wi-Fi devices to the extended network you just created.If you have set up your range extender with a Linksys Max-Stream Router, you don’t have to do anything. Max-Stream routers support seamless roaming, and your extended Wi-Fi network shares the same network name and password as your 5 GHz Wi-Fi band. Connected devices will select the main or extended network as you move around the coverage area.If you do not have a router with seamless roaming, select the extended network on your device's Wi-Fi manager. Extended networks are identified by "_Ext" added to the end of your main network name(s). The password will be the same as your main network.Check light for connection quality.It can take up to a minute for the ranger extender to boot up after moving it. During this period you will see the blinking green light once again. Solid green Ready to use. Solid orange Weak connection to the router. Find an outlet closer to your router. Blinking orange Not connected to the router. Find an outlet closer to your router.Prepare for setupBe sure your router has a working internet connection and you have an ethernet cable long enough to connect the router to the range extender.Note—Do not connect any devices other than your router to the range extender until setup is complete.Plug the range extender into a wall outlet.Wait for the blinking light to change from green to orange.Use an ethernet cable to connect the range extender to the LAN port of your router.Connect to the Linksys Extender Setup network.On a computer, phone, or tablet, connect to the Wi-Fi network Linksys Extender Setup.Setting up as wired range extender (access point)Browser-based setupQuick Start Guide Model RE9000WPS ButtonLightWPS ButtonLightLight127.00 x 127.00 x 177.80Business Unit:Program Manager:Packaging Engineer:Material:Blank Size (in):Side Shown:L x W x D (mm):DIE LAYOUT0Unit:Flute/Grain:REVIntermediatePRINT SIDE5 x 5 x 7L x W x D (in):127[5]177.8[7]762[30]105 GSM C2S ARTPAPERBACKFRONTIN/MMDrawing Scale 1:1Retail Outside Dimension (Including Hang Tab)DO NOT PRINTDIE LINES, PRINTERS NOTESPRINT SPECS:DIE/MATERIAL SPECS:762 x 177.80030 x 7Die Line File:NET-NetworkingBrian ByrdPlease refer to drawingIDL_RE9000_US_CA_QIGColor Plates: Notes:Artwork File:horizontal00RELEASE DATE: 07/27/2017Tolerance:+/- 1/32" - 0.8mmBlank Size (mm):Finish:DIELINE:THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USEDIN ANY MANNER WITHOUT THE WRITTENCONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUESTThis dieline works for following skus (if any):127.00 x 127.00 x 177.80Business Unit:Program Manager:Packaging Engineer:Material:Blank Size (in):Side Shown:L x W x D (mm):DIE LAYOUT0Unit:Flute/Grain:REVIntermediatePRINT SIDE5 x 5 x 7L x W x D (in):127[5]177.8[7]762[30]105 GSM C2S ARTPAPERBACKFRONTIN/MMDrawing Scale 1:1Retail Outside Dimension (Including Hang Tab)DO NOT PRINTDIE LINES, PRINTERS NOTESPRINT SPECS:DIE/MATERIAL SPECS:762 x 177.80030 x 7Die Line File:NET-NetworkingBrian ByrdPlease refer to drawingIDL_RE9000_US_CA_QIGColor Plates: Notes:Artwork File:horizontal00RELEASE DATE: 07/27/2017Tolerance:+/- 1/32" - 0.8mmBlank Size (mm):Finish:DIELINE:THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USEDIN ANY MANNER WITHOUT THE WRITTENCONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUESTThis dieline works for following skus (if any):127.00 x 127.00 x 177.80Business Unit:Program Manager:Packaging Engineer:Material:Blank Size (in):Side Shown:L x W x D (mm):DIE LAYOUT0Unit:Flute/Grain:REVIntermediatePRINT SIDE5 x 5 x 7L x W x D (in):127[5]177.8[7]762[30]105 GSM C2S ARTPAPERBACKFRONTIN/MMDrawing Scale 1:1Retail Outside Dimension (Including Hang Tab)DO NOT PRINTDIE LINES, PRINTERS NOTESPRINT SPECS:DIE/MATERIAL SPECS:762 x 177.80030 x 7Die Line File:NET-NetworkingBrian ByrdPlease refer to drawingIDL_RE9000_US_CA_QIGColor Plates: Notes:Artwork File:horizontal00RELEASE DATE: 07/27/2017Tolerance:+/- 1/32" - 0.8mmBlank Size (mm):Finish:DIELINE:THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USEDIN ANY MANNER WITHOUT THE WRITTENCONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUESTThis dieline works for following skus (if any):.3".3".3".3".138".138".138".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3"FRONT COVERQSG_RE9000_8820-02636_RevA01CYMKACCORDION FOLD ALONG RED LINESFRONT/OUTSIDE: ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYKBACK/INSIDE: ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK 6-Panel Accordion FoldBACK COVERFRONT COVERICG PRODUCTIONPR# 5737FILE NAME QSG_RE9000_8820-02636_RevA01SKU# RE9000P# 8820-02636 REVISION A01DESIGNER jonathanDATE August 28, 2017 5:25 PM VERSION 04](https://usermanual.wiki/LINKSYS/RE9000.Users-Manual-1/User-Guide-3610852-Page-1.png)