LINKSYS RE9000 WiFi Tri band repeater User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3610852
Application ID	ApU/BcI+Un3vepp/zRY39g==
Document Description	Users Manual-1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	261.73kB (3271631 bits)
Date Submitted	2017-10-19 00:00:00
Date Available	2017-10-26 00:00:00
Creation Date	2017-08-28 17:25:07
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-08-28 17:25:17
Document Title	Users Manual-1
Document Creator	Adobe InDesign CC 2017 (Macintosh)

Die Line File:
IDL_RE9000_US_CA_QIG
Artwork File:
QSG_RE9000_8820-02636_RevA01
REV
0 00
Business Unit: NET-Networking
DIE LAYOUT
Program Manager:
Packaging Engineer: Brian Byrd
105 GSM C2S ARTPAPER
.3"
.3"
.3"
Why can I not find “Linksys Extender Setup” in my Wi-Fi list?
Make sure the light on the range extender is blinking orange. If you still can’t see the
setup network, move the device being used for setup closer to the range extender.
Wait for a blinking orange light and refresh the Wi-Fi list.
On browser-based setup, why do I not see the setup screen on http://extender.
linksys.com?
On your device’s Wi-Fi manager, make sure “Linksys Extender Setup” is selected, then
refresh your browser.
On browser-based setup, why can I not see my network name on the “Choose your
wireless” page?
Your range extender might be too far from the router. Move it closer and refresh the list.
I correctly entered my network password during browser-based setup. Why does
the “Enter your password” page still show an error?
The range extender likely is at the outside limit of the router's signal. The signal could
be getting interrupted before your password makes it to the router. Move your range
extender closer to the router.
Why can’t I connect my range extender with WPS?
There are a number of reasons that WPS could fail:
• Your router and range extender are too far apart
• The two-minute connection window expired
• The WPS button on either range extender or router did not depress all the way
• WPS is disabled on the router
• MAC filtering is enabled on the router
How do I reset the range extender to factory defaults?
Press the red reset button on the back of the range extender and hold until the light on
the top starts blinking green.
Why am I experiencing poor signal and slow speed on my range extender?
Be sure that you’ve placed your range extender in an ideal location, as indicated by
Spot Finder Technology. NOTE: When you move around your home, your wireless
devices may not disconnect from the router until they lose the Wi-Fi signal. This may
occur even if the Wi-Fi signal from the range extender signal is stronger (and vice
versa). If you are having connection issues, select the network with the stronger signal.
Use this setup method if you don’t have a WPS button on your router, or if you don’t
want to use WPS to set up your RE9000.
.3"
.3"
Browser-based setup
Frequently asked questions (FAQ)
FRONT
.3"
FRONT COVER
.3"
.3"
.3"
Setting up as wired range extender
(access point)
Connect to Linksys Extender Setup network.
On a computer, phone or tablet, connect to the Wi-Fi network:
Linksys Extender Setup.
.3"
Browser-based setup
Plug in the range extender.
Plug in the range extender midway between your router and the area
without Wi-Fi. Using your mobile device or laptop, be sure you have at least
two bars (around 50%) of your router’s Wi-Fi signal at that location. If you don’t
have two bars, move the range extender closer to the router. You can move the
range extender to an ideal location later using the setup software.
Wait for the light on the top of your range extender to
blink orange.
Launch setup
For advanced configuration, consult the user guide at linksys.com/support/RE9000.
Be sure your router has a working internet connection and you have an ethernet
cable long enough to connect the router to the range extender.
How to connect your Wi-Fi devices to the extended network
you just created.
L x W x D (mm):127.00
Enter http://extender.linksys.com
(or try http://192.168.1.1) in a browser
to complete setup. Be sure to choose
“As a wired range extender (access
point)” when asked how you want to
use your range extender. Follow the
on-screen instructions to create a
network name and password for
your access point.
Material: Please refer to drawing
NEXT-GEN AC
MAX-STREAM™
Blank Size (in): 30 x 7
Blank Size (mm): 762 x 177.800
TRI-BAND AC3000 Wi-Fi
RANGE EXTENDER
Quick Start Guide
Wait for the blinking light to change from green to orange.
Use an ethernet cable to connect the range extender to the
LAN port of your router.
Extended network names
and passwords
Connect to the Linksys Extender Setup network.
Write down the extended network
names and passwords you just created.
x 127.00 x 177.80
DIE/MATERIAL SPECS:
.3"
.3"
Launch setup
Plug the range extender into a wall outlet.
If you have set up your range extender with a Linksys Max-Stream Router, you
don’t have to do anything. Max-Stream routers support seamless roaming, and
your extended Wi-Fi network shares the same network name and password
as your main 5 GHz band. Connected devices will select the main or extended
network as you move around the coverage area.
This can take up to a minute.
Prepare for setup
Note—Do not connect any devices other than your router to the range extender
until setup is complete.
Enter http://extender.linksys.com
(or try http://192.168.1.1) in a browser
to complete setup. Follow the
on-screen instructions to select
your network to extend, customize
your extended network name and
password and find the best spot
using Spot Finder Technology.
Retail Outside Dimension (Including Hang Tab)
L x W x D (in): 5 x 5 x 7
This dieline works for following skus (if any):
Connect your Wi-Fi devices to the extended network you
just created.
Select the extended network on your device’s Wi-Fi manager.
Range extender admin password
Write down your range extender admin
password. You'll need the range extender
admin password if you want to access
your range extender settings.
On a computer, phone, or tablet, connect to the Wi-Fi network Linksys
Extender Setup.
2.4 GHz network name
Admin password
Get Help
2.4 GHz password
If you do not have a router with seamless roaming, select the extended network
on your device's Wi-Fi manager. Extended networks are identified by “−Ext”
added to the end of your main network name(s). Password(s) will be the
same as those for your main network(s).
Internet: linksys.com/support
Twitter: @LinksysCares
Phone (US/Canada): 800-326-7114
(complimentary support during your
warranty period)
5 GHz network name
For advanced configuration, consult user guide at linksys.com/support/RE9000.
5 GHz password
Light
Model# RE9000
8820-02636 Rev. A01
.3"
.3"
.3"
.3"
.3"
.3"
.3"
.3"
.3"
.3"
.3"
.3"
ICG PRODUCTION
Unit: IN/MM
PR# 5737
FILE NAME QSG_RE9000_8820-02636_RevA01
SKU# RE9000
P# 8820-02636
REVISION
Side Shown: PRINT SIDE
Flute/Grain: horizontal
Tolerance:+/- 1/32" - 0.8mm
Drawing Scale 1:1
A01
DESIGNER jonathan
DATE
.3"
.3"
.138"
What’s in this Guide
.138"
.3"
There are two ways to use your Linksys extender: as a wireless range extender or as a wired
range extender (access point). Wireless range extenders boost Wi-Fi range for better coverage
and increased signal strength. Wired range extender (access points) create new Wi-Fi hotspots
when connected to a router with an Ethernet cable. Both scenarios require a router with a
working internet connection.
• Get started
Before starting setup, decide whether you want to use your RE9000 as a wireless range
extender or as a wired range extender (access point). Instructions for both setups are in this guide.
• Setting up as a wireless range extender
• FAQ
Does your router have a WPS button?
WPS Button
Front view
No (or not sure)
Continue with Browserbased setup, also in this
Quick Start Guide
Back view
NOTE — The WPS button will not work if
you have disabled WPS on your router, or
if you have chosen WEP as your network
security type. In either case, continue with
browser-based setup below.
It can take up to a minute for the ranger extender to boot up after moving it.
During this period you will see the blinking green light once again.
Ready to use.
DIELINE:
If your extended network has the same network name as your main network:
• On a computer that is not connected to a wireless network, use an ethernet
cable to connect directly to the range extender. Open a browser and go to
extender.linksys.com.
OR
• Connect to your range extender wirelessly. Depending on your operating system,
one of the following links will get you to the login page. Choose one and enter it in
your browser.
How to connect your Wi-Fi devices to the extended network
you just created.
Intermediate
Android and Windows: http://RE9000
Mac OS X or iOS: http://RE9000.local
If your extended network has a different network name than your main network
(for example mywifi_EXT) :
If you do not have a router with seamless roaming, select the extended network
on your device's Wi-Fi manager. Extended networks are identified by "_Ext"
added to the end of your main network name(s). The password will be the
same as your main network.
Unplug your range extender and plug it back in midway between your router
and the area without Wi-Fi. Using your mobile device or laptop, be sure you
have at least two bars (around 50%) of your router’s Wi-Fi signal at that location.
If you don’t have two bars, move the range extender closer to the router.
RELEASE DATE: 07/27/2017
To change or view range extender settings, first connect to an extended network.
If you have set up your range extender with a Linksys Max-Stream Router, you
don’t have to do anything. Max-Stream routers support seamless roaming, and
your extended Wi-Fi network shares the same network name and password
as your 5 GHz Wi-Fi band. Connected devices will select the main or extended
network as you move around the coverage area.
Move your range extender to an ideal spot.
.3"
Your range extender’s default admin password is “admin”. It is highly recommended that
you change this after WPS setup.
Blinking orange	Not connected to the router. Find an outlet closer
to your router.
WPS Button
04
Accessing your range extender settings
after setup
Solid orange	Weak connection to the router. Find an outlet closer
to your router.
VERSION
.3"
Check light for connection quality.
Solid green
If it starts toblink orange
, the connection failed. You may try again by
repeating step 3 or try browser-based setup.
Wi-Fi Protected Setup (WPS)
1. Ethernet Ports
a. Press the WPS button on your router.
Within the next two minutes press
the WPS button on the side of your
range extender.
If it turns solid green
the connection was successful.
Move to step 4.
Yes
Continue with Wi-Fi Protected
Setup (WPS) below
Your Linksys extender
.3"
Extend your network.
Watch the light on the top of your
range extender to verify whether the
connection was successful.
WPS is a simple way to connect Wi-Fi devices with Push Button Connect. Routers that support
WPS have a button that might look like one of these symbols:
• 	WPS™ button—Use Wi-Fi Protected Setup to automatically and securely add compatible
wireless devices to your network with Push Button Connect.
.3"
The WPS button will light up and the
light on the top of your range extender
will blink green.
Setting up as a wireless range extender
• Setting up as a wired range extender (access point)
177.8
[7]
Connect to the extended network. In a browser, go to http://extender.linksys.com and
enter your admin password.
Your range extender is now set up. Enjoy your extended
Wi-Fi coverage.
extender.linksys.com
Plug the range extender into an
electrical outlet close to your router.
You can move the range extender
to an ideal location later in step 5.
After the range extender is plugged
in the indicator light on the top will
blink green for up to a minute.
Light
2. Reset Button
3. Power Port
• 	 Ethernet ports (1)—Connect wired devices to these ports with ethernet cables.
•	 The light on the front of the range extender gives you information about power, updating and
signal strength.
• Reset button (2)—Press and hold until the light on the front of the range extender blinks to reset
extender to factory default settings.
.3"
Wait for the light on the top of
your range extender to blink
orange before going to step 3.
This can take up to a minute.
• Power port (3)—Connect the included AC power adapter.
.3"
.3"
.3"
Get started
Side view
• Your Linksys extender
BACK
.3"
August 28, 2017 5:25 PM
.3"
.138"
.3"
Light
.3"
.3"
.3"
.3"
.3"
.3"
.3"
127
[5]
762
[30]
Notes:
ACCORDION FOLD ALONG RED LINES
FRONT/OUTSIDE: ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK
BACK/INSIDE: ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK
FRONT COVER
CM
Y K
Finish:
BACK COVER
PRINT SPECS:
Color Plates:
THIS DOCUMENT & THE INFORMATION
IN IT ARE THE CONFIDENTIAL PROPERTY
OF BELKIN INTERNATIONAL AND MUST
NOT BE COPIED, REPRODUCED OR USED
IN ANY MANNER WITHOUT THE WRITTEN
CONSENT OF BELKIN CORPORATION.
IT MUST BE RETURNED UPON REQUEST
6-Panel Accordion Fold
DO NOT PRINT
DIE LINES, PRINTERS NOTES

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2017:08:28 17:25:07-07:00
Creator                         : Adobe InDesign CC 2017 (Macintosh)
Modify Date                     : 2017:08:28 17:25:17-07:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01
Metadata Date                   : 2017:08:28 17:25:17-07:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:211e8d98-051b-8d40-b90e-f4d8608dcafc
Original Document ID            : xmp.did:e0df2f0b-ee91-42d3-9d09-1c92b3d653e4
Document ID                     : xmp.id:e83bf0af-8acb-44cd-8927-389d0d5924be
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:671359d2-0b83-414b-a450-033020911729
Derived From Document ID        : xmp.did:28d583e0-5a82-4f45-846c-f6b01802999c
Derived From Original Document ID: xmp.did:e0df2f0b-ee91-42d3-9d09-1c92b3d653e4
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:08:28 17:25:07-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 1

EXIF Metadata provided by EXIF.tools