LINKSYS WRT54G2V15 Wireless-G Broadband Router User Manual 6001 11414543R ai

LINKSYS LLC Wireless-G Broadband Router 6001 11414543R ai

Manual

Download: LINKSYS WRT54G2V15 Wireless-G Broadband Router User Manual 6001 11414543R ai
Mirror Download [FCC.gov]LINKSYS WRT54G2V15 Wireless-G Broadband Router User Manual 6001 11414543R ai
Document ID1113625
Application IDDJ4VxTrywIwqJ5KZ7gc+lQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize107.41kB (1342587 bits)
Date Submitted2009-05-20 00:00:00
Date Available2009-05-20 00:00:00
Creation Date2009-02-13 09:40:12
Producing SoftwareAcrobat Distiller 6.0 for Macintosh
Document Lastmod2009-05-19 14:29:28
Document Title6001-11414543R.ai
Document CreatorAdobe Graphics Manager
Document Author: imac

I.
Specifications
Model WRT54G2
Standards IEEE 802.3, IEEE 802.3u,
IEEE 802.11g, IEEE 802.11b
Ports Internet: One 10/100 RJ-45 Port
LAN: Four 10/100 RJ-45 Switched
Ports
One Power Port
Button One Reset Button
One Wi-Fi Protected Setup (WPS)
Button
LEDs Power, Wireless, LAN (1-4), Internet,
Wi-Fi Protected Setup (WPS)
Cabling Type CAT5
Number of Antennas One (1) Internal Antennas
RF Power Output 18 dBm
UPnP able/cert Able
Security Features Stateful Packet Inspection (SPI)
Firewall, Internet Policy
Wireless Security Wi-Fi Protected Access™2 (WPA2),
WEP, Wireless MAC Filtering
Environmental
Dimensions 7.99" x 1.38" x 6.30"
(203 x 35 x 160 mm)
Weight 9.88 oz (280 g)
Power External, 12V DC, 0.5A
Certifications FCC, UL, CE, Wi-Fi (802.11b,
802.11g), WPA2, WMM
Operating Temp. 32 to 104oF (0 to 40oC)
Storage Temp. -4 to 140oF (-20 to 60oC)
Operating Humidity 10 to 85%, Noncondensing
Storage Humidity 5 to 90%, Noncondensing
Appendix D:
Regulatory Information
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This product has been tested and complies with the
specifications for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which is found by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
·· Reorient or relocate the receiving antenna
·· Increase the separation between the equipment or
devices
·· Connect the equipment to an outlet other than the
receiver’s
·· Consult a dealer or an experienced radio/TV technician
for assistance
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. IEEE
802.11b or 802.11g operation of this product in the USA is
firmware-limited to channels 1 through 11.
Industry Canada Statement
This Class B digital apparatus complies with Canadian
ICES-003 and RSS210.
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including
interference that may cause undesired operation of the
device. This device has been designed to operate with
an antenna having a maximum gain of 2dBi. Antenna
having a higher gain is strictly prohibited per regulations
of Industry Canada. The required antenna impedance
is 50 ohms.
To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen
that the EIRP is not more than required for successful
communication.
Industry Canada Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 6.0 for Macintosh
Create Date                     : 2009:02:13 09:40:12+08:00
Modify Date                     : 2009:05:19 14:29:28+08:00
Creator Tool                    : Adobe Graphics Manager
Metadata Date                   : 2009:05:19 14:29:28+08:00
Document ID                     : uuid:4dfd3aac-f96f-11dd-9b7f-0017f2dca15c
Instance ID                     : uuid:15da2e36-0261-4efb-9d69-60e31fdd515e
Format                          : application/pdf
Title                           : 6001-11414543R.ai
Creator                         : imac
Has XFA                         : No
Page Count                      : 2
Author                          : imac
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q87-WRT54G2V15

Navigation menu