LITE ON TECHNOLOGY ALPINE Advanced iPod Controller with Bluetooth User Manual ex10manual indd
LITE-ON Technology Corp. Advanced iPod Controller with Bluetooth ex10manual indd
user manual
English
Start Here.
Here’s how to use the eX-10
with your iPod® and Bluetooth phone.
2
Ready, set, go.
eX-10 in-car setup is quick and easy. First, place the display on the
dashboard in your fi eld of vision. Then plug the power supply unit into
the cigarette lighter. Finally use the supplied Full Speed cable to con-
nect the eX-10 to your iPod®.
1
2
3
3
Set a frequency.
The eX-10 broadcasts audio to your car stereo just like an FM radio station.Tune to an
FM frequency on your radio where there is no radio station reception. Set the same
frequency on the eX-10 from ‘Transmitter’ in thesetup menu. Then, set the type of
audio output required. Access the setup menuand select ‘General’ and then ‘Output
Mode’. Select ‘Transmitter’ or ‘WireTransmitter’ depending on which method you
would like to use. Select ‘Wire Transmitter’ when you use FM switching box.
4
Choose your language.
Access the main menu via the SETUP switch on the remote control
and select ‘General’ and then ‘Language’. Select the language you
want to use for your song information.
5
Listen to your iPod® music.
Use the SEARCH button on your remote control to access your
search options. You can search by songs, artists, albums, playlists,
podcasts, audiobooks, composers and genres. When you fi nd the
song you want, press ENTER and the song will start to play through
your car speakers.
6
See what’s playing.
You can select three display modes by pushing the VIEW button on
your remote. The fi rst is the standard view, which shows the song,
artist and album, and a small picture of the album artwork. The sec-
ond shows the song name and an enlarged view of the artwork. The
third shows the song, artist and album names with no artwork.
7
Get the best sound.
You can pick one of ten equalizer presets for great sound with any
type of music. First select ‘Audio’ from the setup menu, then use the
LIST switch to select the desired EQ setting.
8
Place the microphone.
Secure the microphone in a convenient location in front of you so it
will pick up the sound of your voice. For example, on a pillar or on the
dashboard. Do not install the microphone in any position that could
interfere with the functionality of airbags in your vehicle. Consult your
local car dealer for more information.
9
Pair your Bluetooth phone.
Ready your Bluetooth enabled phone for pairing. Select ‘Pairing
Mode’ in the ‘Bluetooth’ menu, then search for the connection device
from your Bluetooth phone and enter the PIN code displayed on the
eX-10. When pairing is complete, ‘Paired’ will be displayed on the
eX-10. Next, complete the connection settings from your Bluetooth
phone. When connection is complete, ‘Connected’ will be displayed
on the eX-10.
10
Turn auto connection on.
To make the eX-10 automatically connect your phone when you enter
your car, turn on the automatic connection function. To do that, go to
the ‘Bluetooth’ menu and set ‘Auto Connect’ to ‘On’.
11
Making a call from your phonebook.
Press the CALL icon button and use the LIST switch to select
‘Phonebook’ by pressing the ENTER button; then use the LIST switch
to fi nd the phone number you want. Press the CALL icon button to
dial the number.
12
Other ways of making a call.
First, press the CALL button and use the LIST switch to select lists of
dialed calls, received calls and missed calls. You can select numbers
from those lists and press the CALL icon button to dial them.
13
Answering a call.
When a call comes in, the ring tone will sound and the phone number
will be displayed. Press the CALL icon button and the call will start.
Alternatively, you can set ‘Auto Answer’ to have the phone answer
calls automatically.
14
Listen to songs from your phone.
Press the SOURCE button to select ‘Bluetooth Audio’ mode.
Use the LIST switch to change tracks. To pause playback, press the
PLAY/PAUSE button.
15
Match your dashboard.
In the ‘Display’ menu, choose ‘BGV Select’ to select from among
three BGV Select to match the color of your dashboard.
Apple, the Apple logo and iPod are trademarks of Apple, Inc., reg-
istered in the U.S. and other countries. The Bluetooth word mark
and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Alpine Electronics, Inc. is under license.
How to learn more and get support.
If you want more detailed information on operating the eX-10,
you can download the owner’s manual and get additional help at
http://www.alpine-usa.com/support
If you would like to speak to Alpine customer support concerning
eX-10 operation,
please call 1-800-ALPINE-1.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RF exposure warning ·
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.