LITE ON TECHNOLOGY SS335 1X1 802.11b/g/n-BT4.0 Combo PCIe MoB Module User Manual LiteOn Technology Corp

Download:
Mirror Download [FCC.gov]
Document ID	2359432
Application ID	UkOF7VwYMv9l/SMCeLM9mA==
Document Description	UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	99.67kB (1245934 bits)
Date Submitted	2014-08-15 00:00:00
Date Available	2015-02-11 00:00:00
Creation Date	2017-10-21 13:21:59
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 13:21:59
Document Title	LiteOn Technology Corp.
Document Creator	Microsoft® Word 2010
Document Author:	Kaysa Lee

PRODUCT SPECIFICATION
MODEL NAME:
MODULE PN:
WCBN3603A-SS
AAZ100075G0
SEC CODE:
Version 1.0
TOP
Bottom
* This document contains confidential proprietary information and is property of LTC. The contents of
this document should not be disclosed to unauthorized persons without the written consent of LTC.
Page 1/18
CONTENT
1. CHANGE HISTORY ..................................................................................................................... 3
2. LOCATION INFORMATION FOR MANUFACTURING FACTORY .................................. 3
3. GENERAL DESCRIPTION .......................................................................................................... 4
BT FEATURE: ......................................................................................................................................... 4
WIFI FEATURE: ...................................................................................................................................... 4
COMMON FEATURE: ............................................................................................................................... 4
4. CTQ (CRITICAL TO QUALITY), MAIN CONTROL ITEMS ................................................ 5
5. ELECTRICAL CHARACTERISTICS ........................................................................................ 5
6. TEST SETUP .................................................................................................................................. 6
7. INTERNAL BLOCK DIAGRAM ................................................................................................. 7
8. BASIC THEORY ............................................................................................................................ 7
9. PIN DEFINITON ............................................................................................................................ 8
10. APPLICATION NOTE ................................................................................................................ 9
11. SPECIFICATION OF MEASUREMENT JIG ........................................................................ 10
12. REFLOW PROFILE .................................................................................................................. 11
13. INITIAL TEST REPORT .......................................................................................................... 11
14. RELIABILITY TEST REPORT ............................................................................................... 12
15. MECHANICAL CHARACTERISTICS ................................................................................... 12
16. STRUCTURE AND MATERIAL ............................................................................................. 12
17. PACKAGING REEL & TAPE .................................................................................................. 12
18. MARKING .................................................................................................................................. 15
19. CONTROL CHART ................................................................................................................... 15
20. LEAD FREE ................................................................................................................................ 16
21. ROHS QUALIFICATION REPORT ........................................................................................ 16
22. SAMPLE HISTORY .................................................................................................................. 16
23. BOM LIST ................................................................................................................................... 16
Page 2/18
1. Change History
Revision
Version 1.0
Date
2014/06/18
Author
Kaysa Lee
Change List
Preliminary
2. Location information for Manufacturing Factory
Fab
Assembly
Final Test
1st Case
Lite-On CZ
Lite-On CZ
2nd Case
Page 3/18
3rd Case
3. General Description
BT Feature:
 Bluetooth V4.0 LE, V3.0 HS, Bluetooth V2.1+EDR system, backwards compatible with BT version
of 1.1, 1.2 and 2.0
 Support Class II (TX power maximum to +4dBm)
 BT transmission speed including 1M, 2M and 3Mbps EDR operations
 Support for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function
 Support for SCATTERNET and PICONET
 HCI USB interface to work with Windows upper layer stack
WiFi Feature:
 Operate at ISM frequency Band(2.4GHz)
 IEEE Standards Support, 802.11b, 802.11g and 802.11n
 WiFi using mini PCIe interface
 Enterprise level security supporting: WPA, WPA2
 Support 1 transmission and 1 receiving, transmission rate can up to 150Mbps (Physical Rate) in
downstream and upstream
 Full feature software utility for easy configuration and management
Common Feature:
 Form Factor: M.2 2226
 Support OS: Windows Win7/Win8
 Support for BT & WLAN Co-existence
 RoHS Compliance
 Low Halogen Compliance
 WiFi:
Reg Domain
Vendor ID
Device ID
Subsystem ID
Subsystem Vendor ID
Most of World SKU
Channel 1-11 with active scan
Channel 12~13 with passive scan
0x006A
0x168C
0x0036
0x4129
0x144D
 BT:
Vendor ID
Product ID
0x0CF3
0x3004
Page 4/18
4. CTQ (Critical To Quality), Main Control Items
5. Electrical Characteristics
Main chipset
Qualcomm Atheros QCA9565
Functional Specifications
BT Function
Standard
Bluetooth V4.0LE, V3.0 HS, V2.1+EDR,
Bus Interface
USB
Data Rate
1 Mbps, 2Mbps and Up to 3Mbps
Modulation Scheme
GFSK, π/4-DQPSK and 8-DPSK
Frequency Range
2.402~2.480 GHz
Transmit Output Power
-6 ≤ Output Power ≤ +4; Class 2 Device
Receiver Sensitivity
< 0.1% BER at -70dBm
Software
Bluetooth Suite
WiFi Function
Standard
IEEE802.11b; IEEE 802.11g; IEEE 802.11n
Bus Interface
PCI Express
Data Rate
802.11b:
11, 5.5, 2, 1 Mbps
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 7 for HT20MHz
MCS 0 to 7 for HT40MHz
Media Access Control
CSMA/CA with ACK
Modulation Techniques:
Network Architecture
Operation Channel
Frequency Range
Transmit Output Power – 2x2
(Tolerance: +-2dBm)
802.11b:
CCK, DQPSK, DBPSK
802.11g, 11a:
64QAM, 16QAM, QPSK, BPSK
802.11n:
BPSK, QPSK, 16QAM, 64QAM
Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
2.4GHz
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
14: (Ch. 1-14) – Japan
802.11bg
2.412 ~ 2.4835 GHz
802.11b / CCK :
17 dBm@6,9,12,18,24Mbps
802.11g / OFDM:
18 dBm@6,9,12,18,24Mbps
17 dBm@36Mbps
Page 5/18
16 dBm@48Mbps
14 dBm@54Mbps
802.11n / HT20:
17 dBm@MCS0,1,2,3,4
16 dBm@MCS5
15 dBm@MCS6
13 dBm@MCS7
802.11n / HT40:
16 dBm@MCS0,1,2,3,4
16 dBm@MCS5
15 dBm@MCS6
13 dBm@MCS7
802.11b:
Less than -76dBm
802.11g / 11a:
Less than -82dBm @ 6Mpbs
Less than -65dBm @54Mbps
802.11n:
Receive Sensitivity
HT20
Less than -82dBm @ MCS0
Less than -64dBm @ MCS7
HT40
Less than -79dBm @ MCS0
Less than -61dBm @ MCS7
Security
WPA, WPA2, WPS, IEEE 802.1X, IEEE 802.11i
Common Function
Operating Voltage
3.3 V ± 10% I/O supply voltage
Antenna Type
Dual MHF4 RF connector
Operating
Operating Temperature: 0 to 75 C
Operating/Storage Temperature
Relative Humidity: 5-90% (non-condensing)
Storage
Temperature: -40 to 85 C
Relevant Humidity: 5-95% (non-condensing)
6. Test Setup
Page 6/18
7. Internal Block Diagram
8. Basic Theory
Page 7/18
9. Pin Definiton
Page 8/18
10. Application Note
Power up sequencing:
Page 9/18
11. Specification of Measurement JIG
Page 10/18
12. Reflow Profile
13. Initial Test Report
Page 11/18
14. Reliability Test Report
15. Mechanical Characteristics
Tolerance: +/- 0.1mm
16. Structure and Material
17. Packaging Reel & Tape
Page 12/18
Page 13/18
Page 14/18
18. Marking
19. Control Chart
Page 15/18
20. Lead Free
This product is a module not IC which has no outside terminal, the contact with
customer platform is through the bottom pad. We don’t do whisker test for module.
21. RoHS Qualification Report
22. Sample History
23. BOM List
Page 16/18
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
maycause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Country Code selection feature to be disabled for products marketed to
theUS/CANADA
Antenna General Information
Model
Used for
Ant. Type
Connector
Gain (dBi)
Main
Wi-Fi
PIFA
U.FL
3 @ 2.4GHz
Aux
Bluetooth
PIFA
U.FL
3.62 @ 2.4GHz
Note: An extended coax cable was supplied for this antenna with below info.:

Cable loss: 1dB
 Connector type: U.FL
Page 17/18
This device is intended only for OEM integrators under the following
conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna,
3) For all products market in US, OEM has to limit the operation channels in CH1
to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not
supply any tool or info to the end-user regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmittertest will not be required.
However, the OEM integrator is still responsible for testing their end-product for
any additional compliance requirements required with this module installed
IMPORTANT NOTE
In the event that these conditions can not be met(for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization
is no longer considered valid and the FCC ID can notbe used on the final product.
In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna
may be installed such that 20 cm may be maintained between the antenna and
users. The final end product must be labeled in a visible area with the following:
“Contains FCC ID:PPQ-SS335”.
Manual Informationto the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’smanual of the end
product which integratesthis module.
The end user manual shall include all required regulatory information/warning as show in
this manual.
Page 18/18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : Kaysa Lee
Create Date                     : 2014:08:15 14:03:25+08:00
Modify Date                     : 2014:08:15 14:38:56+08:00
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Kaysa Lee
Title                           : LiteOn Technology Corp.
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2014:08:15 14:38:56+08:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:e529cbd5-e84f-4389-ada2-07fa08ca51cc
Instance ID                     : uuid:8d6b8d7c-92b9-4a7e-bfee-84167003788d
Page Count                      : 18

EXIF Metadata provided by EXIF.tools