LITE ON TECHNOLOGY WB110C BT Module User Manual WB110C IW 970520

LITE-ON Technology Corp. BT Module WB110C IW 970520

Contents

manual part 1

Download: LITE ON TECHNOLOGY WB110C BT Module User Manual WB110C  IW   970520
Mirror Download [FCC.gov]LITE ON TECHNOLOGY WB110C BT Module User Manual WB110C  IW   970520
Document ID945582
Application ID7/mISYW/TAZeOh4FdPSGVw==
Document Descriptionmanual part 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize220.41kB (2755141 bits)
Date Submitted2008-05-23 00:00:00
Date Available2008-05-23 00:00:00
Creation Date2008-05-23 07:28:26
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2008-05-23 10:31:46
Document TitleWB110C(-IW) user manual 970520..PDF
Document CreatorPScript5.dll Version 5.2
Document Author: BBXP

Bluetooth Module
WB110C (WB110C-IW)
User’s Manual
Federal Communication Commission Interference Statement
7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV%GLJLWDO
GHYLFH SXUVXDQW WR 3DUW  RI WKH )&& 5XOHV  7KHVH OLPLWV DUH GHVLJQHG WR SURYLGH
UHDVRQDEOH SURWHFWLRQ DJDLQVW KDUPIXO LQWHUIHUHQFH LQ D UHVLGHQWLDO LQVWDOODWLRQ  7KLV
HTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQVWDOOHG
DQG XVHG LQ DFFRUGDQFH ZLWK WKH LQVWUXFWLRQV PD\ FDXVH KDUPIXO LQWHUIHUHQFH WR UDGLR
FRPPXQLFDWLRQV  +RZHYHU WKHUH LV QR JXDUDQWHH WKDW LQWHUIHUHQFH ZLOO QRW RFFXU LQ D
SDUWLFXODU LQVWDOODWLRQ  ,I WKLV HTXLSPHQW GRHV FDXVH KDUPIXO LQWHUIHUHQFH WR UDGLR RU
WHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKH
XVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHRIWKHIROORZLQJPHDVXUHV

5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD

,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU

&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKH
UHFHLYHULVFRQQHFWHG

&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
)&& &DXWLRQ $Q\ FKDQJHV RU PRGLILFDWLRQV QRW H[SUHVVO\ DSSURYHG E\ WKH SDUW\
UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHU VDXWKRULW\WRRSHUDWHWKLVHTXLSPHQW
7KLV GHYLFH FRPSOLHV ZLWK 3DUW  RI WKH )&& 5XOHV 2SHUDWLRQ LV VXEMHFW WR WKH
IROORZLQJ WZR FRQGLWLRQV   7KLV GHYLFH PD\ QRW FDXVH KDUPIXO LQWHUIHUHQFH DQG  
WKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVH
XQGHVLUHGRSHUDWLRQ
7KH DQWHQQD V  XVHG IRU WKLV WUDQVPLWWHU PXVW QRW EH FRORFDWHG RU RSHUDWLQJ LQ
FRQMXQFWLRQZLWKDQ\RWKHUDQWHQQDRUWUDQVPLWWHU
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
7KLVHTXLSPHQWFRPSOLHVZLWK)&&UDGLDWLRQH[SRVXUHOLPLWVVHWIRUWKIRUDQXQFRQWUROOHG
HQYLURQPHQW
7KLV HTXLSPHQW PXVW QRW EH FRORFDWHG RU RSHUDWLQJ LQ FRQMXQFWLRQ ZLWK DQ\ RWKHU
DQWHQQDRUWUDQVPLWWHU
USERS MANUAL OF THE END PRODUCT:
The end user has to be informed that the FCC radio-frequency exposure guidelines for an
uncontrolled environment can be satisfied. The end user has to also be informed that any
changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then
additional FCC part 15.19 statement is required to be available in the users manual: This device
complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX
FCC ID: PPQ-WB110C/PPQ-WB110CIW ". If the size of the end product is larger than
8x10cm, then the following FCC part 15.19 statement has to also be available on the
label: This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Hereby, Lite-On, declares that this device is in compliance with the essential requirement and
other relevant provisions of the R&TTE Driective 1999/5/EC. “ ᆖী‫ڤ‬ᎁᢞ‫ٽ‬௑հ‫פ܅‬෷୴᙮ሽ
ᖲΔॺᆖ๺‫ױ‬Δֆ‫׹‬Ε೸ᇆࢨࠌ‫݁ृش‬լ൓ᖐ۞᧢‫ޓ‬᙮෷Ε‫ף‬Օ‫פ‬෷ࢨ᧢‫଺ޓ‬๻ૠհ௽ࢤ֗‫פ‬౨Ζ
‫פ܅‬෷୴᙮ሽᖲհࠌ‫ش‬լ൓ᐙ᥼ଆ౰‫ڜ‬٤֗եឫ‫ٽ‬ऄຏॾΙᆖ࿇෼‫ڶ‬եឫ෼ွழΔᚨ‫ܛم‬ೖ‫ش‬Δࠀ
‫ޏ‬࿳۟ྤեឫழֱ൓ᤉᥛࠌ‫ش‬Ζছႈ‫ٽ‬ऄຏॾΔਐࠉሽॾऄ๵ࡳ‫܂‬ᄐհྤᒵሽຏॾΖ‫פ܅‬෷୴᙮ሽ
ᖲႊ‫ٽ࠹ݴ‬ऄຏॾࢨՠᄐΕઝᖂ֗᠔᛭‫ش‬ሽंᘿ୴ࢤሽᖲ๻ໂհեឫΖ”‫ء‬ᑓิ࣍࠷൓ᎁᢞ৵ലࠉ
๵ࡳ࣍ᑓิ‫᧯ء‬ᑑ‫ق‬ᐉ᧭‫ٽ‬௑ᑑ᧘, ࠀ૞‫؀ؓޣ‬ᐗ೸࣍ؓ‫؀‬Ղᑑ‫ق‬ψ‫ء‬ข঴փܶ୴᙮ᑓ CC XX xx
YY yyy Z z W‫ڗ‬ᑌΔᇡาᇷறᓮ೶‫شࠌە‬ᎅࣔ஼Ζ ‫ء‬ֆ‫׹‬բ࣍ᎅࣔ஼խ༼ࠎࢬ‫ؘڶ‬૞ᇷಛ‫א‬ਐᖄ
ࠌ‫ृش‬/‫ڜ‬ᇘृ‫إ‬ᒔऱ‫ڜ‬ᇘ֗ᖙ‫܂‬Ζ
The module will only be sold to and installed by appointed OEM or ODM installers.
1 INTRODUCTION
1.1 WB110C (-IW) Bluetooth Module
WB110C (-IW) Bluetooth Module uses CSR BC4 ROM A07 chip
which fully qualified Bluetooth v2.1+EDR system.
The features of Bluetooth V2.1 is improved pairing, improved
security, lower power consumption, and near field communication
technology.
With Enhanced Data Rate (EDR mode), the rate up to 2Mbps and
3Mbps.
This module controls in USB interface and is compliance with USB
v1.1 and compatible with USB v2.0. It being used to integrate with
systems such as NB, desk top…etc. With Bluetooth module embedded
inside, a system could provide the ability to link with peripherals
wirelessly through Bluetooth function.
1.2 How to works
The module refers to a worldwide Bluetooth SIG standard. Before
transfer data to each other, two BT modules must establish a connection.
One device requests the connection with another and the second one
accept it. Then user can use different data transfer function wirelessly
between two Bluetooth devices.
1.3 Product Features
BluetoothÂŽ V2.1+EDR system (backwards compatible with v1.1/1.2
/2.0devices)
Class II (Max +4 dBm, 2.5mW) Ęł
4Mbits integral ROM
Enhanced Data Rate (EDR) compliant for both 2Mbps and 3Mbps
modulation modes
Integrated Printed Antenna
Tiny Form Factor
Support OS: Windows based OS
Full-speed Bluetooth operation with full Piconet support
Scatternet support
Extended SCO (eSCO) support
1.8V core, 1.7 to 3.6V I/O
Low-power 1.8V operation (integral 1.8V regulator)
USB and dual UART ports to 3Mbaud
Support for 802.11 coexistence
RoHS Compliant
Standards
Interface
Form Factor
Data Rate
Frequency Range
Transmit Output
Power
Receiver Sensitivity
Operating Voltage
OS supported
Bluetooth stack
Power Consumption
Coverage
Antenna Type
Bluetooth V2.1 + EDR
USB
ACES 87213-0800G connector
Data Rate: 1 Mbps, 2Mbps and Up to
3Mbps
2.402~2.480 GHz
2 Âą 1 dBm Class 2 Device
< 0.1% BER at -78 dBm
3.3 V DC +/- 10%
Windows based OS
CSR HCI stack
TX mode: 58mA
RX mode: 46mA
Stand by mode: 12mA
Up to 10m (Varies depending on operating
environment) *
Printed Antenna
1.4 System Requirements
System should meet the following items:
-MB supports matched USB connector
-Windows XP/Vista
-60MB free disk for installing the Toshiba stack
1.5 WB110C(-IW) Product View
2 Using the Bluetooth Utility


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2008:05:23 07:28:26Z
Modify Date                     : 2008:05:23 10:31:46+02:00
Metadata Date                   : 2008:05:23 10:31:46+02:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Creator                         : BBXP
Title                           : WB110C(-IW) user manual 970520..PDF
Document ID                     : uuid:3638f69d-c199-44a4-8bd2-c2eadccb76f8
Instance ID                     : uuid:80bf71ab-1def-4ae3-8526-09a16cbe53b6
Has XFA                         : No
Page Count                      : 60
Author                          : BBXP
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PPQ-WB110C

Navigation menu