LITE ON TECHNOLOGY WB116A Bluetooth Module User Manual WB116A Spec ver1 02 Sandra

Download:
Mirror Download [FCC.gov]
Document ID	2783041
Application ID	PA3TXDC4r2IbwzcP/HDx0A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.49kB (318619 bits)
Date Submitted	2015-10-15 00:00:00
Date Available	2015-10-16 00:00:00
Creation Date	2017-09-09 13:46:03
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-09 13:46:03
Document Title	Microsoft Word - WB116A_Spec_ver1 02 -Sandra.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	KellyWeng

USER MANUAL
Bluetooth Module
Model Name: WB116A
Version 1.0
Author: Kaysa Lee
Change History
Revision
Version 1.0
Version 1.01
Version 1.02
Date
2015 / 09 / 11
2015 / 09 / 11
2015 / 09 / 17
Author
Kaysa Lee
Kaysa Lee
Kaysa Lee
Change List
Preliminary
Add PCB information
Add Silkscreen Information
* This document contains confidential proprietary information and is property of LTC. The contents of this
document should not be disclosed to unauthorized persons without the written consent of LTC.
WB116A
Page 1/10
2015/10/15
1 PRODUCT OVERVIEW
1.1 DESCRIPTION
WB116A (X type/Y type) is a Bluetooth module which using Airoha Chipset AB1520H
1.2 FEATURES
Fully qualified Bluetooth ® v3.0 system
Class I (Max +5 dBm)
Codec: SBC / AAC
Content Protection: SCMS‐T
RoHS compliance
Low Halogen compliance
1.3 GENERAL SPECIFICATIONS
Main Chipset
AB1520H
Standard
Bluetooth V3.0
Profiles
A2DP Sink / AVRCP / SPP / DID
Bus Interface
Digital Audio Output (I2S/SPDIF)
Digital Audio Input (I2S) + UART
Form Factor
37mm x 18mm x 3.2mm
Weight
2g(typ.)
Data Rate
1 Mbps, 2Mbps and Up to 3Mbps
Frequency Range
2.400 ~ 2.4835 GHz
Transmit Output Power +1 ~ +5 dBm Class 1 Device
Receive Sensitivity
Temperature &
Humidity
BDR < 0.1% BER at ‐70 dBm
EDR < 0.007% BER at ‐70 dBm
Normal Test Condition: 25 +/‐ 2deg.C , 65 +/‐ 2% RH
Operating: ‐10 to 70 deg.C
Storage: ‐40 to 85 deg.C
Operating Voltage
3.3V ±10% I/O supply voltage
Power Consumption
165mW .max
Antenna Type
Printed Antenna(0.24dBi)
WB116A
Page 2/10
2015/10/15
PANEL DRAWING
1.4 SHIELDING COVER
WB116A
Page 3/10
2015/10/15
1.5 CERTIFICATION
Country
United States
Canada
Europe
Japan
Taiwan
Russia
China
UAE
Argentina
Regulatory
FCC Part15C
RSS‐247
EN300 328 v1.9.1
EN301 489‐1/‐17
EN60950
EN62311
TELEC
NCC
FAC
SRRC
TRA
CNC
Approval ID
PPQ‐WB116A
4491A‐WB116A
Remarks
FCC ID: PPQ‐WB116A
IC:4491A‐WB116A
CE logo + NB number
1.6 SILKSCREEN INFORMATION
TOP Side
Design
Marking
Lead‐Free
Description
Min Height 3mm
Halogen‐Free
Min Height 3mm
PWB Material
FR‐4
Board Number
Specify the PWB
Board position of the
work area.
These three marks
should be located in
the same area.
Minimum Mark Height
is 1.8mm.
Minimum Text Height
is 1.2mm.
Minimum Text Height is
1.2mm.
Minimum Text Height is
1.2mm.
Minimum Text Height is
1.2mm.
Minimum Text Height is
3mm.
Bottom Side
UL Direct Support
E220370 (PIOTEK)
E85792 (APCB)
UL Recognized
Component
UL Identification
WB116A
Model name
PPQ‐WB116A
FCC ID
4491A‐WB116A
IC Number
CE Mark and NB
Number
NCC ID and Logo
China CMIIT ID
WB116A
Page 4/10
2015/10/15
REGULATORY STATEMENTS
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located with any other transmitters except in
accordance with FCC multi-transmitter product procedures.
Refering to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be
operated simultaneously without C2P.
WB116A
Page 5/10
2015/10/15
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the
compliance to all the rules that apply to the product into which this certified RF module is
integrated.
Additional testing and certification may be necessary when multiple modules are used.
20cm minimum distance has to be able to be maintained between the antenna and the users
for the host this module is integrated into. Under such configuration, the FCC radiation
exposure limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has
to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled
environment can be satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the user's authority to
operate this equipment. If the size of the end product is smaller than 8x10cm, then additional
FCC part 15.19 statement is required to be available in the users manual: This device
complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WB116A
Page 6/10
2015/10/15
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC
ID: PPQ-WB116A ". If the size of the end product is larger than 8x10cm, then the following
FCC part 15.19 statement has to also be available on the label: This device complies with
Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WB116A
Page 7/10
2015/10/15
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This device and its antenna(s) must not be co-located with any other transmitters except in
accordance with IC multi-transmitter product procedures.
Refering to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be
operated simultaneously without reassessment permissive change.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association
avec une autre antenne ou transmetteur.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.
WB116A
Page 8/10
2015/10/15
This module is intended for OEM integrator. The OEM integrator is still responsible for the
IC compliance requirement of the end product, which integrates this module.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has
to be informed that the IC radio-frequency exposure guidelines for an uncontrolled
environment can be satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the user's authority to
operate this equipment. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC :
4491A-WB116A ".
Antenna list:
Brand
Model Name Antenna Type Connector
Holder
SONY
WB116A
Printed Antenna
1 Corporation
N/A
Note: The EUT has one antenna.
Ant.
WB116A
Page 9/10
Gain (dBi)
0.24
2015/10/15
I N T RODU CT I ON
The Bluetooth Module is a device that allows you connect your computer to a wireless local
area network (LAN). A wireless LAN allows your system to use wireless Radio Frequency
(RF) technology to transmit and receive data without physically attaching to the network. The
Wireless protocols that come with this product ensure data security and isolation from
interference generated by other radio frequencies.
This card also allows you to take full advantage of your computer’s mobility with
access to real-time information and online services anytime and anywhere. In addition, this
device eliminates the bother of pulling cable through walls and under furniture. It even allows
you to place your system in locations where cabling is impossible. Modifying and augmenting
networks has never been so easy.
OEM integrators are instructed to ensure that the end user has no manual instructions
to remove or install the device.
WB116A
Page 10/10
2015/10/15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : KellyWeng
Create Date                     : 2015:10:15 11:33:21+08:00
Modify Date                     : 2015:10:15 11:52:17+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Microsoft Word - WB116A_Spec_ver1 02 -Sandra.doc
Creator                         : KellyWeng
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:10:15 11:52:17+08:00
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:aca390e6-425c-494c-92d7-c799ed657f39
Instance ID                     : uuid:c566a091-0d31-42db-9e9a-e3ce530748da
Page Count                      : 10

EXIF Metadata provided by EXIF.tools