LITE ON TECHNOLOGY WCBN3510A 802.11 a/b/g/n/ac 2T2R+BT V4.2LE combo module User Manual LiteOn Technology Corp

LITE-ON Technology Corp. 802.11 a/b/g/n/ac 2T2R+BT V4.2LE combo module LiteOn Technology Corp

Contents

User Manaul

Download: LITE ON TECHNOLOGY WCBN3510A 802.11 a/b/g/n/ac 2T2R+BT V4.2LE combo module User Manual LiteOn Technology Corp
Mirror Download [FCC.gov]LITE ON TECHNOLOGY WCBN3510A 802.11 a/b/g/n/ac 2T2R+BT V4.2LE combo module User Manual LiteOn Technology Corp
Document ID3717675
Application IDF22/pPAhJ96loht+LSXjkg==
Document DescriptionUser Manaul
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize121.93kB (1524067 bits)
Date Submitted2018-01-17 00:00:00
Date Available2018-01-18 00:00:00
Creation Date2017-12-15 01:46:05
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2017-12-15 01:46:05
Document TitleLiteOn Technology Corp.
Document CreatorMicrosoft® Word 2013
Document Author: Tracy Chang

PRODUCT SPECIFICATION
Wi-Fi (11a/b/g/n/ac 2Tx2R)+BT (V4.2LE) SDIO Combo Module
WCBN3510A
User Manual
Page 1/18
CONTENT
DESCRIPTION ............................................................................................................................. 8
PRODUCT FEATURES ............................................................................................................... 8
PRODUCT SPECIFICATIONS ................................................................................................... 9
MAIN CHIPSET ................................................................................................................................. 9
FUNCTIONAL SPECIFICATIONS .......................................................................................................... 9
RECOMMENDED OPERATION CONDITIONS .................................................................... 12
PIN ASSIGMENT ....................................................................................................................... 12
MECHANICAL .......................................................................................................................... 14
FOOTPRINT .............................................................................................................................. 14
MODULE PINOUT .................................................................................................................... 15
BLOCK DIAGRAM ................................................................................................................... 15
MHF4 CONNECTOR SPEC ...................................................................................................... 16
POWER-UP SEQUENCE TIMING ........................................................................................... 17
EEPROM INFORMATION ....................................................................................................... 18
BT ................................................................................................................................................. 18
WI-FI ............................................................................................................................................ 18
ENVIRONMENTAL .................................................................................................................. 18
OPERATING .................................................................................................................................... 18
STORAGE ....................................................................................................................................... 18
Page 2/18
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
˗ Reorient or relocate the receiving antenna.
˗ Increase the separation between the equipment and receiver.
˗ Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
˗Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and its antenna(s) must not be co-located with any other transmitters except in
accordance with FCC multi transmitter product procedures.
Referring to the multi transmitter policy, multiple transmitter(s) and module(s) can be
operated simultaneously without C2PC.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
Page 3/18
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the
compliance to all the rules that apply to the product into which this certified RF module is
integrated.
Additional testing and certification may be necessary when multiple modules are used.
20 cm minimum distance has to be able to be maintained between the antenna and the users
for the host this module is integrated into. Under such configuration, the FCC radiation
exposure limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20
cm separation with the antenna while this end product is installed and operated. The end
user has to be informed that the FCC radio frequency exposure guidelines for an uncontrolled
environment can be satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the user's authority to
operate this equipment. If the size of the end product is smaller than 8x10cm, then additional
FCC part 15.19 statement is required to be available in the users manual: This device complies
with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
PPQ- WCBN3510A ". If the size of the end product is larger than 8x10cm, then the following
FCC part 15.19 statement has to also be available on the label: This device complies with Part
15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
OEM Integrator Checklist
The party below will implement the LITE-ON Module in host systems in accordance with the
instructions specified in this document and the documents referenced herein.
1. The OEM integrator will ensure the Module is integrated in a host systems using only the
approved antenna model(s) described in this document.
2. The OEM integrator will ensure the antenna placement inside the host system will
Page 4/18
maintain the required spacing to end user for RF Exposure compliance, as specified in this
document.
3. If other radios are integrated inside the host with the LITE-ON Module, the OEM
integrator will contact its test lab, TCB or LITE-ON to determine if additional FCC
compliance evaluation is required to meet FCC collocation rules.
4. The OEM integrator will ensure end user documentation will contain the specified
regulatory wording and ensure the host system and the Module itself are labeled as
specified in this document.
5. The OEM integrator will ensure the Module is programmed in the factory with compliant
transmit power not exceeding the levels specified in this document.
LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the
above instructions. You may contact LITE-ON with any questions concerning this document or
the responsibilities of the OEM integrator.
IC Statement:
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
Pour les produits disponibles aux États Unis / Canada du marché, seul le canal 1 à 11 peuvent
être exploités. Sélection d'autres canaux n'est pas possible.
This device and its antenna(s) must not be co-located with any other transmitters except in
accordance with IC multi transmitter product procedures.
Referring to the multi transmitter policy, multiple transmitter(s) and module(s) can be
operated simultaneously without reassessment permissive change.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association
avec une autre antenne ou transmetteur.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
Page 5/18
potential for harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes
de satellites mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such
that the equipment still complies with the e.i.r.p. limits specified for point-to-point and
Non-point-to-point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz)
doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non-point
à point, selon le cas.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz,
5470-5600 MHz and 5650-5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes
5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
5470-5725 MHz doit se conformer à la limite de p.i.r.e.
Users should also be advised that high power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could
cause interference and/or damage to LE•LAN devices.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute
puissance sont désignés utilisateurs principaux (c.•à•d., qu’ils ont la priorité) pour les bandes
5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN•EL.
Pour une utilisation en intérieur uniquement.
Page 6/18
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20 cm between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC
compliance requirement of the end product, which integrates this module.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20
cm separation with the antenna while this end product is installed and operated. The end
user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled
environment can be satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the user's authority to
operate this equipment. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC:
4491A-WCBN3510A ".
Page 7/18
DESCRIPTION
QCA9379-3 is a single-die wireless local area network(WLAN) and Bluetooth(BT) combo
solution to support 2x2 MIMO with two spatial streams IEEE802.11 a/b/g/n/ac WLAN
standards and BT 4.2+HS enabling seamless integration of WLAN/BT and Low Energy
technology.
PRODUCT FEATURES
 Bluetooth V4.2 LE system
Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.1, 3.0+HS and V4.0LE
 Bluetooth Class I transmission power
 Support for Adaptive Frequency Hopping(AFH), Secure Simple Pairing (SSP) and
Extended Inquiry Response (EIR) function
 Scatternet operation with up to four active piconets with background scan and support
for scatter mode
 Low power consumption for meeting worldwide energy standards
 Operate at ISM frequency Band (2.4/5GHz)
 IEEE Standards Support, 802.11a ,802.11b, 802.11g 802.11n and 802.11ac
 Support for both 20 MHz/40 MHz channel width in 2.4GHz and 20 MHz/40
MHz/80MHz channel width in 5GHz
 Enterprise level security supporting: WPS2.0,WAPI, WPA, WPA2
 Dual-stream IEEE 802.11n support for 20MHz and 40MHz channels provides PHY
layer rates up to 300Mbps
 Dual-stream IEEE 802.11ac support for 80MHz channels provides PHY layer rates up
to 867Mbps
 Support for WI-Fi Direct
 Support MU-MIMO
 Fully compliance with SDIO v3.0 specification
 Support OS: Linux based
 RoHS compliance
 Low Halogen compliance
Page 8/18
PRODUCT SPECIFICATIONS
MAIN CHIPSET
Qualcomm Atheros QCA9379-3
FUNCTIONAL SPECIFICATIONS
BT Function
Standard
Bluetooth V4.2LE
Bus Interface
UART
Data Rate
1 Mbps, 2Mbps and Up to 3.2Mbps
Modulation Scheme
GFSK, π/4-DQPSK and 8-DPSK
Frequency Range
2.402~2.480 GHz
Transmit Output
Power
+4 ≤ Output Power ≤ +10dBm; Class I Device
Receiver Sensitivity
< 0.1% BER at -94dBm
Wi-Fi Function
Standard
IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n;
IEEE802.11ac
Bus Interface
SDIO 3.0
Data Rate
802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11b:
11, 5.5, 2, 1 Mbps
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 15 for HT20MHz
MCS 0 to 15 for HT40MHz
802.11ac:
MCS 0 to 8 for HT20MHz
MCS 0 to 9 for HT40MHz
MCS 0 to 9 for HT80MHz
Media Access Control CSMA/CA with ACK
802.11a:
64QAM, 16QAM, QPSK, BPSK
802.11b:
CCK, DQPSK, DBPSK
802.11g:
Modulation Technique
64QAM, 16QAM, QPSK, BPSK
802.11n:
64QAM, 16QAM, QPSK, BPSK
802.11ac:
256QAM, 64QAM, 16QAM, QPSK, BPSK
Page 9/18
Network Architecture Infrastructure mode
Operation Channel
Frequency Range
2.4GHz
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
14: (Ch. 1-14) – Japan
5GHz
21: USA
19: EU
8: Japan
802.11bg
2.400 ~ 2.4835 GHz
802.11a
5.15 ~ 5.85 GHz
Transmit Output Power - single chain @ant;
Tolerance: ±2dBm@2.4GHz; ±2.5dBm@5GHz
2.4GHz
802.11b
Tgtpwr
(dBm)
1Mbps
14.5
2Mbps
14.5
5.5Mbps
14.5
11Mbps
14.5
802.11g
Tgtpwr
(dBm)
6~24Mbps
16.5
36Mbps
16
48Mbps
15
54Mbps
13.5
802.11n
HT20
Tgtpwr
(dBm)
802.11n
HT40
Tgtpwr
(dBm)
MCS0
MCS1
MCS2
MCS3
MCS4
16.5
MCS5
16.5
MCS6
16.5
MCS7
16
MCS8
16
MCS9
15
14
13.5
11.5
MCS0
MCS1
MCS2
MCS3
MCS4
15.5
MCS5
15.5
MCS6
15.5
MCS7
15
MCS8
15
MCS9
14
13
12.5
11.5
10.5
5GHz
802.11a
Tgtpwr
(dBm)
802.11n
HT20
Tgtpwr
(dBm)
802.11n
HT40
Tgtpwr
6~24Mbps
15.5
36Mbps
14
48Mbps
13
54Mbps
12
MCS0
MCS1
MCS2
MCS3
MCS4
15.5
MCS5
15.5
MCS6
15.5
MCS7
15
MCS8
15
MCS9
14
13
12
11
MCS0
MCS1
MCS2
MCS3
MCS4
14.5
14.5
14.5
14
14
Page 10/18
(dBm)
802.11ac
VHT80
Tgtpwr
(dBm)
MCS5
MCS6
MCS7
MCS8
MCS9
13
12
11
10
MCS0
MCS1
MCS2
MCS3
MCS4
13.5
MCS5
13.5
MCS6
13.5
MCS7
13
MCS8
13
MCS9
12
11
10
Receiver Sensitivity
Frequency
Band
2.4G
5G
Security
Rate
Condition
1x1(1SS)
2x2(1SS)
(dBm)
(dBm)
11b-1M
PER < 8%
-95
-97
11b-11M
PER < 8%
-87
-87
11g-6M
PER < 10%
-90
-92
11g-54M
PER < 10%
-73
-75
11ac-VHT20MCS0
PER < 10%
-89.5
-91.5
11ac-VHT20MCS7
PER < 10%
-73
-75
11ac-VHT20MCS8
PER < 10%
-68
-70
11ac-VHT40MCS0
PER < 10%
-87
-89
11ac-VHT40MCS7
PER < 10%
-69.5
-71.5
11ac-VHT40MCS8
PER < 10%
-66.5
-68.5
11ac-VHT40MCS9
PER < 10%
-63
-66
11a-6M
PER < 10%
-87.5
-89.5
11a-54M
PER < 10%
-71
-73
11ac-VHT20MCS0
PER < 10%
-87.5
-89.5
11ac-VHT20MCS7
PER < 10%
-70
-73
11ac-VHT20MCS8
PER < 10%
-66
-69
11ac-VHT40MCS0
PER < 10%
-84.5
-86.5
11ac-VHT40MCS7
PER < 10%
-67
-69
11ac-VHT40MCS9
PER < 10%
-61
-64
11ac-VHT80MCS0
PER < 10%
-81.5
-83.5
11ac-VHT80MCS7
PER < 10%
-65
-67
11ac-VHT80MCS9
PER < 10%
-57
-60
WPS, WPA, WPA2, WEP 64bit & 128bit, IEEE 802.1X, IEEE
802.11i
Common Function
Operating Voltage
3.3 V ±5% I/O supply voltage
Mode
2.4G
Power Consumption
Average
5G
2.4G
Peak
5G
TX
RX
Disable
WiFi+BT
@Wake
up mode
Antenna Type
Triple MHF4 Antenna connectors for WiFi/BT
Page 11/18
RECOMMENDED OPERATION CONDITIONS
Symbol
VDD33
Parameter
3.3V Supply Voltage
VDD33_SWREG_VIN Supply Voltage for internal PMU
VDDIO_GPIO0
VDDIO_GPIO1
Voltage supply for all IO signals
VDDIO_GPIO2
VDDIO_AO_IN
1.1V supply from internal 1.1V
AVDD11
PMU
Min
Typ
Max
Units
3.14
3.3
3.46
3.14
3.3
3.46
1.71
1.8
1.89
3.14
3.3
3.46
1.05
1.1
1.2
PIN ASSIGMENT
* The following signal type is defined:
I: Input; O: Output; I/O: Input/Output; G: Ground
Pin.
Pin Define
I/O
Description
GND
AVDD11
GND
VDD33_WL_PA1
VDD33
GND
VDDIO_XTAL
10
BT_UART_CTS
BT_UART_TXD
HOST_WAKEUP_BT#
11
12
13
14
Status
YES
Ground
Analog 1.1V input from Pin#28 of Module
(Host no need to connect)
Ground
3.3V Power for both 2.4GHz/5GHz PA in
WLAN Chain 1
3.3V power for WLAN
Ground
Share same voltage of VDDIO_AO_IN
(Pin#32)
UART Clear to Send for BT interface
UART Transmit Data for BT interface
Host wake up BT of QCA9379-3, Low Active
BT_UART_RXD
BT_PCM_SYN
UART Receive Data for BT interface
PCM synchronous for BT
YES
YES
15
BT_PCM_OUT
BT_UART_RTS
BT_PCM_CLK
YES
YES
YES
16
AVDD11
17
BT_PCM_IN
PCM Data out for BT
UART Ready to Send for BT interface
PCM Clock for BT
Analog 1.1V input from Pin#28 of Module
(Host no need to connect)
PCM Data in for BT. 10K PU in the module
18
VDDIO_GPIO1
1.8V or 3.3V upon signal interface
YES
19
20
21
RESERVED
RESERVED
VDDIO_GPIO0
Can be 1.8V (SDIO3.0) or 3.3V (SDIO2.0)
NC
NC
YES
22
SDOI_DATA3
SDIO Data Line3 for WLAN
YES
23
24
WOW#
SDIO_CLK
WLAN wake up Host, Low Active
SDIO Clock for WLAN
YES
YES
I/O
Page 12/18
NC
YES
YES
YES
YES
YES
YES
YES
YES
NC
YES
25
26
27
SDOI_DATA2
SDOI_DATA1
I/O
I/O
SDIO Data Line2 for WLAN
SDIO Data Line1 for WLAN
YES
YES
SDOI_DATA0
I/O
SDIO Data Line0 for WLAN
Analog 1.1V output
(Host no need to connect)
SDIO Command for WLAN
Active low to reset WLAN
Active low to reset BT
Can be 1.8V or 3.3V to support always on
circuit of QCA9379-3. This signal must be
connected to 1st power on and last power off
power rail. The design is target to connect to
3.3V
BT wake up Host. 10K PU in the module
, Low Active
Firmware Debug pin, Host can be not
connected
Firmware Debug pin, Host can be not
connected
3.3V input to internal SWREG PMU and
OTPREG PMU
Ground
YES
YES
YES
28
AVDD11
29
30
31
SDIO_CMD
WLAN_EN#
BT_EN#
32
VDDIO_AO_IN
33
BT_WAKEUP_HOST#
34
Debug_UART_TXD
35
Debug_UART_RXD
36
VDD33_SWREG_VIN
37
38
SWREG_GND
39
SWREG_GND
VDDIO_GPIO2
40
32.768KHz_IN
41
AVDD11
42
GND
Ground
1.8V or 3.3V upon signal interface
Optional external low-power 32.768KHz
input Signal can not be active before
VDDIO_GPIO2 is applied
Analog 1.1V input from Pin#28 of Module
(Host no need to connect)
Ground
43
44
45
GND
GND
GND
Ground
Ground
Ground
YES
YES
YES
46
VDD33
YES
47
VDD33
48
GND
49
AVDD11
GND
3.3V Power for BT PA
3.3V Power for both 2.4GHz/5GHz PA in
WLAN Chain 0
Ground
Analog 1.1V input from Pin#28 of Module
(Host no need to connect)
Ground
50~66
I/O
Page 13/18
NC
YES
YES
YES
YES
YES
NC
NC
YES
YES
YES
NC
YES
YES
YES
NC
YES
MECHANICAL
FOOTPRINT
Page 14/18
MODULE PINOUT
BLOCK DIAGRAM
Page 15/18
MHF4 CONNECTOR SPEC
Page 16/18
POWER-UP SEQUENCE TIMING
Page 17/18
EEPROM INFORMATION
BT
Vendor ID
0x0271
Product ID
0x0801
WI-FI
Reg Domain
TBD
Vendor ID
0x0271
Product ID
0x0801
ENVIRONMENTAL
OPERATING
Operating Temperature: 0 to 50 C (32 to 122 F)
Relative Humidity: 5-90% (non-condensing)
STORAGE
Temperature: -40 to 80 C (-40 to 176 F)
Relative Humidity: 5-95% (non-condensing)
Page 18/18

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 18
Language                        : zh-TW
Tagged PDF                      : Yes
Title                           : LiteOn Technology Corp.
Author                          : Tracy Chang
Creator                         : Microsoft® Word 2013
Create Date                     : 2017:12:15 01:46:05+08:00
Modify Date                     : 2017:12:15 01:46:05+08:00
Producer                        : Microsoft® Word 2013
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PPQ-WCBN3510A

Navigation menu