LITE ON TECHNOLOGY WM862FEMD 802.11ac 2x2 MIMO PCI Express Mini Card User Manual Product Specifications

Download:
Mirror Download [FCC.gov]
Document ID	3441550
Application ID	x1H5KP+cFIDdQRoKlq4Zcg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.57kB (382178 bits)
Date Submitted	2017-06-27 00:00:00
Date Available	2017-06-28 00:00:00
Creation Date	2017-06-22 09:58:06
Producing Software	Microsoft® Word 2013
Document Lastmod	2017-06-23 16:50:47
Document Title	Product Specifications
Document Creator	Microsoft® Word 2013
Document Author:	user

802.11 a/b/g/n/ac 2x2 dual band WLAN PCIe Card
WM862FEMD Application Note
Author:
Title:
Version:
Date:
Jerry Zeng
WM862FEMD-Application Note_V01_20170622
v0.1
06/22/2017
Revision History
This document contains confidential proprietary information and is the property of LiteOn Technology,
Inc. The contents of this document may not be disclosed to unauthorized persons without the written consent
of LiteOn Technology, Inc.
All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form by any means without the written permission of
LiteOn Technology, Inc.
Rev.
v0.1
Date
Author
June,22, 2017 Jerry Zeng
Revision Description
Initial Draft
Contents
1.
Hardware Features .................................................................................................................. 5
1.1 Product specification ............................................................................................ 5
1.2 RF specification.................................................................................................... 5
1.3 PCIe Pin Definition .............................................................................................. 7
1.4 PCIe Signal Description ....................................................................................... 8
1.5 PCB Specification ................................................................................................ 9
2.
Application Note ..................................................................................................................... 10
2.1 Login .................................................................................................................. 10
2.2 WiFi setting commands ...................................................................................... 10
2.3 Continuous Rx command ....................................................................................11
Figures
Figure 1-1
WM862FEMD PCB Outlin ..................................................................................... 9
Tables
Table 1-1
Table 1-2
WM862FEMD Pin Definition ................................................................................. 7
Type of PCI Express Interface Signals ................................................................... 8
1. Hardware Features
1.1 Product specification
Radio Chipset
QCA9882
WLAN Standards
IEEE 802.11a/b/g/n/ac compliant
Antenna connector
U.FL connector
Modulation
802.11a/b/g/n/ac:
CCK(11&5.5 Mbps), DQPSK (2Mbps), DBPSK
(1Mbps), DSSS, DBPSK, DQPSK, OFDM, BPSK, QPSK, 16QAM,
64QAM, 256QAM
Power Consumption
Operation (max.) < 3W
Voltage
3.3 VDC from host (+/- 0.2V)
1.2 RF specification
Radio spec is listed as following,
802.11n Radio Specifications
Operating
Frequency
• 2.412 GHz to 2.462 GHz
Operating
Channels
• Based on regulatory domain
Modulation
• Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power
• 23.29dBm(Max. power)
Configurable
Association Rates
• Modulation Coding Scheme MCS 0 – MCS 15 (6.5Mbps –
300Mbps)
802.11b Radio Specifications
Operating
Frequency
• 2.412 GHz to 2.462 GHz
Operating
Channels
• Based on regulatory domain
Transmit Power
•24.89dBm(Max. power)
Modulation
• Direct-Sequence-Spread-Spectrum (DSSS)
Configurable
Association Rates
• 11 Mbps, 5.5 Mbps, 2 Mbps, and 1 Mbps with automatic
fallback
802.11g Radio Specifications
Configurable
Association Rates
• 2.412 GHz to 2.462 GHz
Operating
Channels
• Based on regulatory domain
Modulation
• Orthogonal Frequency Division Multiplexing (OFDM)
Operating
Frequency
Transmit Power
•24.44dBm(Max. power)
Configurable
Association Rates
• 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps,
9 Mbps and 6 Mbps with automatic fallback
802.11ac Radio Specifications
Operating Frequency
•
5.18 GHz to 5.825 GHz
Operating Channels
• Based on regulatory domain
Modulation
• Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power
•
Configurable
Association Rates
• Modulation Coding Scheme MCS 0 – MCS 19 (6.5Mbps –
866.7Mbps)
22.87dBm(Max. power)
802.11n Radio Specifications
Operating Frequency
•
5.18 GHz to 5.825 GHz
Operating Channels
• Based on regulatory domain
Modulation
• Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power
•
Configurable
Association Rates
• Modulation Coding Scheme MCS 0 – MCS 15 (6.5Mbps –
300Mbps)
22.87dBm(Max. power)
802.11a Radio Specifications
Operating Frequency
• 5.18 GHz to 5.825 GHz
Operating Channels
• Based on regulatory domain
Modulation
• Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power
•
Configurable
Association Rates
• 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9
Mbps and 6 Mbps with automatic fallback
22.23dBm(Max. power)
1.3 PCIe Pin Definition
Table 1-1 WM862FEMD Pin Definition
RF CARD pin definition
PCIe Signal
Name
Pin #
WAKE_L
CLKREQ_L
Description
wake event system O
Reference clock
11
request signal
PCI Express
REFCLK-
I/O
differential reference
clock
PCI Express
REFCLK+
13
differential reference
clock
GPIO0
20
RESET_L
22
PER0N
23
PER0P
25
PET0N
31
PET0P
33
WLAN_DISABLE_L I
Functional reset to the I
card
PCI Express x1 data
interface
PCI Express x1 data
interface
PCI Express x1 data O
interface
PCI Express x1 data O
interface
NOTE
provide status
WLAN_LED
44
indicators via LED
devices
Active low signals
USB signal
USB_DN
36
USB_DP
38
3.3V
2,24,41,52
power source
4,9,15,18,21,26,27,29
GND
GND
I/O NOT
USED
USB signal
I/O NOT
USED
34,35,40,43,50
1.4 PCIe Signal Description
The WM862FEMD PCI Express interface pins are described in “Pin Definition” at Table1-1.
The interface pins grouped by functional type shows as below.
Table 1-2 Type of PCI Express Interface Signals
Type
Pins
Differential reference clock
(100MHz)
REFCLKREFCLK+
PETp0
Differential receive
PETn0
PERn0
Differential transmit
PERp0
Reference clock request
CLKREQ_L
Request to service a function
initiated wake event
WAKE_L
PCI Express fundamental reset
RESET_L
1.5 PCB Specification
The PCB Dimension (W x L x D) (mm) : 30mm x 50.95mm x 1mm
Figure 1-1 WM862FEMD PCB Outlin
2. Application Note
2.1 Login
IP address: 192.168.1.1
Telnet login: username & password are not needed.
2.2 WiFi setting commands
Only need to run below commands once.
uci set wireless.@wifi-device[2].country=US
uci set wireless.@wifi-device[2].hwmode=11ac
uci
uci
uci
uci
uci
uci
uci
set
set
set
set
set
set
set
wireless.@wifi-device[2].disabled=0
wireless.@wifi-device[2].htmode=VHT80
wireless.@wifi-device[2].channel=149
wireless.@wifi-device[2].txchainmask=3
wireless.@wifi-device[2].rxchainmask=3
wireless.@wifi-iface[2].wds=1
wireless.@wifi-iface[2].mode=ap
uci set wireless.@wifi-iface[2].ssid=WP8333-wifi2
uci set wireless.@wifi-iface[2].encryption=none
uci set wireless.@wifi-iface[2].device=wifi2
uci commit wireless
wifi
iwconfig
a) Set country code
uci set wireless.@wifi-device[2].country=US
uci commit wireless
wifi
uci set wireless.@wifi-device[2].country=GB
uci commit wireless
wifi
10
Regulatory
domain
Country code
FCC
US
CE
GB
IC
CA
Japan
JP (for 2.4G radio)
4015 (for 5G
radio)
b) Set wireless mode
Radio 3:
uci set wireless.@wifi-device[2].hwmode=11ac
uci commit wireless
wifi
Note: available hwmode for Radio 3: 11b, 11g, 11ng, 11a, 11na, 11ac
c) Set bandwidth and channel
Radio 3:
uci set wireless.@wifi-device[2].htmode=VHT80
uci set wireless.@wifi-device[2].channel=149
uci commit wireless
wifi
Note: available htmode for Radio 3: VHT80, HT40+, HT40-, HT20
VHT80 is only applicable for 11ac mode.
2.3 Continuous Rx command
2.4G:
uci
uci
uci
uci
uci
set
set
set
set
set
wireless.wifi2.disabled=0 &&
wireless.wifi2.hwmode='11ng' &&
wireless.wifi2.htmode='HT40+' &&
wireless.wifi2.channel='1' &&
wireless.@wifi-iface[2].mode='monitor' &&
11
uci commit wireless &&
wifi
Note: available hwmode for Radio 3 2G: 11b, 11g, 11ng,
available htmode for Radio 3 2G: HT40+, HT40-, HT20
5G:
uci set wireless.wifi2.disabled=0 &&
uci set wireless.wifi2.hwmode='11ac' &&
uci set wireless.wifi2.htmode='VHT80' &&
uci set wireless.wifi2.channel='149' &&
uci set wireless.@wifi-iface[2].mode='monitor' &&
uci commit wireless &&
wifi
Note: available hwmode for Radio 3 5G: 11a, 11na, 11ac
available htmode for Radio 3 5G: VHT80, HT40+, HT40-, HT20
12
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
This device is restricted for indoor use.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 28
cm between the radiator & your body.
13
IMPORTANT NOTE:
This module is intended for OEM integrator only and limited to host with brand: LITE-ON,
MOJO and model: WP8333V1, C-110. The OEM integrator is still responsible for the FCC
compliance requirement of the end product, which integrates this module.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least
28 cm separation with the antenna while this end product is installed and operated. The
end user has to be informed that the FCC radio-frequency exposure guidelines for an
uncontrolled environment can be satisfied.
The end user has to also be informed that any changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX
FCC ID: PPQ-WM862FEMD ".
The FCC part 15.19 statement below has to also be available on the label: This device
complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Antenna list:
Ant.
Brand
Model Name
Master Wave Technology CO., LTD
98P7NPIPF000
PCB Antenna
I-PEX
R1
Master Wave Technology CO., LTD
98P7NPIPF001
PCB Antenna
I-PEX
R1
Master Wave Technology CO., LTD
98P7PUIPF000
PCB Antenna
I-PEX
R2
Master Wave Technology CO., LTD
98P7QUIPF000
PCB Antenna
I-PEX
R2
Master Wave Technology CO., LTD
98P7RPIPF000
PCB Antenna
I-PEX
R3
Master Wave Technology CO., LTD
98P7RPIPF001
PCB Antenna
I-PEX
R3
Master Wave Technology CO., LTD
98P7SMIPF000
PCB Antenna
I-PEX
R4
14
Antenna Type Connector Radio
Gain (dBi)
Radio 1
Ant.
Radio 2
Radio 3
Radio 4
2.4G
5G
B1
5G
B4
5G
B1
5G
B2
5G
B3
5G
B4
2.4G
5G
B1
5G
B2
5G
B3
5G
B4
BT
6.3
4.3
5.3
6.5
4.9
6.1
5.6
5.8
6.1
5.9
5.6
6.0
5.4
4.6
6.5
4.7
4.7
5.6
6.0
6.5
4.8
5.4
5.8
5.5
2.1
Note1: The EUT has seven antennas.
15
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être
exploités. Sélection d'autres canaux n'est pas possible.
This radio transmitter (IC: 4491A-WM862FEMD) has been approved by Industry Canada
to operate with the antenna types listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 4491A-WM862FEMD) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal d'antenne.
Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont
strictement interdits pour l'exploitation de l'émetteur.
Antenna list:
Ant.
Brand
Model Name
Master Wave Technology CO., LTD
98P7NPIPF000
PCB Antenna
I-PEX
R1
Master Wave Technology CO., LTD
98P7NPIPF001
PCB Antenna
I-PEX
R1
Master Wave Technology CO., LTD
98P7PUIPF000
PCB Antenna
I-PEX
R2
Master Wave Technology CO., LTD
98P7QUIPF000
PCB Antenna
I-PEX
R2
Master Wave Technology CO., LTD
98P7RPIPF000
PCB Antenna
I-PEX
R3
16
Antenna Type Connector Radio
Ant.
Brand
Model Name
Master Wave Technology CO., LTD
98P7RPIPF001
PCB Antenna
I-PEX
R3
Master Wave Technology CO., LTD
98P7SMIPF000
PCB Antenna
I-PEX
R4
17
Antenna Type Connector Radio
Gain (dBi)
Radio 1
Ant.
Radio 2
Radio 3
Radio 4
2.4G
5G
B1
5G
B4
5G
B1
5G
B2
5G
B3
5G
B4
2.4G
5G
B1
5G
B2
5G
B3
5G
B4
BT
6.3
4.3
5.3
6.5
4.9
6.1
5.6
5.8
6.1
5.9
5.6
6.0
5.4
4.6
6.5
4.7
4.7
5.6
6.0
6.5
4.8
5.4
5.8
5.5
2.1
Note1: The EUT has seven antennas.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz,
5470-5600 MHz and 5650-5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350
MHz, 5470-5600 MHz et 5650-5725 MHz.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
5470-5725 MHz doit se conformer à la limite de p.i.r.e.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be
18
such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and
non-point-to-point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz)
doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon
le cas.
19
Users should also be advised that high-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars
could cause
interference and/or damage to LE-LAN devices.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 56505850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
For indoor use only.
Pour une utilisation en intérieur uniquement.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 28 cm between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 28
cm de distance entre la source de rayonnement et votre corps.
IMPORTANT NOTE:
This module is intended for OEM integrator only and limited to host with brand: LITE-ON,
MOJO and model: WP8333V1, C-110. The OEM integrator is still responsible for the IC
compliance requirement of the end product, which integrates this module.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least
28 cm separation with the antenna while this end product is installed and operated. The
end user has to be informed that the IC radio-frequency exposure guidelines for an
uncontrolled environment can be satisfied. The end user has to also be informed that any
20
changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains IC:
4491A-WM862FEMD ".
The Host Model Number (HMN) must be indicated at any location on the exterior of the
end product or product packaging or product literature which shall be available with the
end product or online.
Japan Statement:
5GHz band (W52, W53): Indoor use only
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : user
Create Date                     : 2017:06:22 09:58:06+08:00
Modify Date                     : 2017:06:23 16:50:47+08:00
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : user
Title                           : Product Specifications
Creator Tool                    : Microsoft® Word 2013
Metadata Date                   : 2017:06:23 16:50:47+08:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:c5722174-66f1-482a-bd63-1d0deb28e705
Instance ID                     : uuid:17ad10ff-a1c4-49ee-a8a4-d30021a360e9
Page Count                      : 20

EXIF Metadata provided by EXIF.tools