LITE ON TECHNOLOGY WN4505L 802.11a/b/g/n/ac, 2T2R Wireless LAN USB2.0 Module User Manual LiteOn Technology Corp
LITE-ON Technology Corp. 802.11a/b/g/n/ac, 2T2R Wireless LAN USB2.0 Module LiteOn Technology Corp
WN4505L User manual
User manual 802.11ac, 2T2R Wireless LAN USB2.0 Module WN4505L Version 1.2 Author: Kaysa Lee Editor: Kaysa Lee Change History Revision Version 1.0 Version 1.1 Version 1.2 Date 2013/03/04 2013/12/06 2014/04/22 Author Kaysa Lee Kaysa Lee Kaysa Lee Change List Preliminary Update Pin definition for WOW function Update Power Consumption * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC WN4505L Specification Page 1/8 LTC Network Access Confidential 2014/4/22 CONTENT PRODUCT FEATURES .................................................................................................................... 4 PRODUCT SPECIFICATIONS ........................................................................................................ 5 MAIN CHIPSET ....................................................................................................................................... 5 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 5 CONNECTOR SPEC (CONNECTOR 1.25MM 1*5P 50271-0050N-001 SMD(宏致)) ................ 7 PIN ASSIGNMENT ............................................................................................................................ 7 BLOCK DIAGRAM ................................................................................................................................. 8 EEPROM INFORMATION .............................................................................................................. 8 ENVIRONMENTAL .......................................................................................................................... 8 OPERATING ............................................................................................................................................ 8 STORAGE................................................................................................................................................ 8 WN4505L Specification Page 3/8 LTC Network Access Confidential 2014/4/22 PRODUCT FEATURES Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac The WN4505L is developed using single-chip designed by Realtek Technology Corporation USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed Enterprise level security supporting: WPA, WPA2, WEP 64/128 Support 2 transmission and 2 receiving, transmission rate can up to 867Mbps (Physical Rate) in downstream and upstream Full feature software utility for easy configuration and management RoHS compliance Low Halogen compliance WN4505L Specification Page 4/8 LTC Network Access Confidential 2014/4/22 PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Realtek 8812AU-VS-CG FUNCTIONAL SPECIFICATIONS WiFi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface Universal Serial Bus (USB2.0) Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz Media Access Control CSMA/CA with ACK 802.11b: CCK, DQPSK, DBPSK 802.11g: Modulation Techniques 64QAM, 16QAM, QPSK, BPSK 802.11n: BPSK, QPSK, 16QAM, 64QAM Ad-hoc mode (Peer-to-Peer) Network Architecture Infrastructure mode 2.4GHz 11: (Ch. 1-11) – United States Operation Channel 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan 802.11bg Frequency Range 2.412 ~ 2.462 GHz 802.11b: 16 dBm@1~11Mbps 802.11g: 16 dBm@6~24Mbps 15 dBm@36Mbps~54Mbps 802.11a: 16 dBm@6~24Mbps 15 dBm@36Mbps~54Mbps Transmit Output Power – 802.11n: 2x2 2.4G 16dBm@MCS0~3 (Tolerance: +-1.5dBm) 15dBm@MCS4 14dBm@MCS5 13dBm@MCS6 13dBm@MCS7 5G 16dBm@MCS0~3 15dBm@MCS4 WN4505L Specification Page 5/8 LTC Network Access Confidential 2014/4/22 14dBm@MCS5 13dBm@MCS6 13dBm@MCS7 13dBm@MCS9 802.11g mode (54Mbps) < -25dB HT20 (MCS7) < -28dB EVM HT40(MCS7) < -28dB HT80(MCS9) < -32dB 802.11b at 11 MHz Offset-30dBr 802.11b at 22 MHz Offset-50dBr 802.11a/g at 9 MHz Offset0 dBr 802.11a/g at 11 MHz Offset -20 dBr 802.11a/g at 20 MHz Offset-28 dBr Transmit Spectrum 802.11a/g at 30 MHz Offset-40 dBr flatness/Mask 802.11n at 9 MHz offset0 dBr 802.11n at 11 MHz offset-20 dBr 802.11n at 20 MHz offset-28 dBr 802.11n at 30 MHz offset-45 dBr 802.11n above 30MHz offset-53dBm/MHz Transmit center frequency +/-20ppm(48kHz) frequency stability vs. temperature and aging. tolerance 802.11b: -94dBm@1Mbps -82dBm@11Mbps 802.11g: -90dBm@6Mbps -68dBm@54Mbps 802.11n: Receive Sensitivity 20MHz -89dBM@MCS0 -67dBm@MCS7 -65dBm@MCS15 40MHz -88dBm@MCS0 -64dBm@MCS7 -62dBm@MCS15 WPA, WPA2, WPS, WEP 64/128, IEEE 802.11x, IEEE Security 802.11i Operating Voltage 5V ±10% I/O supply voltage OS Supported Microsoft Windows XP/Vista/Win7/Win8/Linux Power Consumption Antenna Type WN4505L Specification TX Mode: 580mA RX Mode: 165mA Standby Mode: 165mA Two Metallic Antenna Page 6/8 LTC Network Access Confidential 2014/4/22 CONNECTOR SPEC (CONNECTOR 1.25MM 1*5P 50271-0050N-001 SMD(宏致)) PIN ASSIGNMENT PIN. PIN DEFINE +5V DD+ GND WOW - Device wake Host function Host inform Device function MECHANICAL WN4505L Specification Page 7/8 LTC Network Access Confidential 2014/4/22 BLOCK DIAGRAM EEPROM INFORMATION World Wide_13 Reg Domain 0x7F Vendor ID 0x0BDA Product ID 0x881A ENVIRONMENTAL Operating Operating Temperature: 0 to 75 C (32 to 167 F) Relevant Humidity: 5-90% (non-condensing) Storage Temperature: -40 to 85 C (-40 to 185 F) Relevant Humidity: 5-95% (non-condensing) WN4505L Specification Page 8/8 LTC Network Access Confidential 2014/4/22 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC rules. These limits are designed to provide r easonable protection against harmful interference in a residential installation. This equ ipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio co mmunications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or televi sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measu res: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the recei ver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party r esponsible for compliance could void your authority to operate the equipment. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an unco ntrolled environment. This equipment should be installed and operated with a minimu m distance of 20 centimeters between the radiator and your body. According to FCC 15.407(e), the device is intended to operate in the frequency band o f 5.15GHz to 5.25GHz under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interfer ence to cochannel MSS operations. Information to OEM integrator The OEM integrator has to be aware not to provide information to the end user regard ing how to install or remove this RF module in the user manual of the end product. Th e user manual which is provided by OEM integrators for end users must include the fo llowing information in a prominent location. 1. To comply with IC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with IC multitransmitter product transmitter product procedures. 2. Only those antennas with same type and lesser gain filed under this IC ID number c an be used with this device. 3. The regulatory label on the final system must include the statement: “Contains IC I D: xxxx “. 4. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented two ways authentication between module and the host system. 5. If the end product integrating this module is going to be operated in 5.15 ~5.25GHz frequency range, the warning statement in the user manual of the end product should include the restriction of operating this device in indoor could void the user’s authorit y to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 9 Language : zh-TW Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b6fc66b9-37e2-44cd-904e-bb184418052d Producer : Microsoft® Word 2010 Modify Date : 2014:07:22 15:19:39+08:00 Create Date : 2014:04:22 14:32:07+08:00 Creator Tool : Microsoft® Word 2010 Metadata Date : 2014:07:22 15:19:39+08:00 Document ID : uuid:1b20713b-f075-49f9-b60d-ee4107de95d6 Format : application/pdf Title : LiteOn Technology Corp. Creator : Tracy Chang Tagged PDF : No Author : Tracy ChangEXIF Metadata provided by EXIF.tools