LITE ON TECHNOLOGY WN4515L 802.11a/b/g/n/ac,2T2R Wireless LAN USB2.0 Module User Manual LiteOn Technology Corp

LITE-ON Technology Corp. 802.11a/b/g/n/ac,2T2R Wireless LAN USB2.0 Module LiteOn Technology Corp

User Manual

Page 1/13 PRODUCT SPECIFICATION 802.11a/b/g/n/ac, 2T2R Wireless LAN USB2.0 Module WN4515L Realtek RTL8812AU Version 1.0 User Manual * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC
Page 2/13 CONTENT FCC WARING STATEMENT .......................................................................................................... 3 IC WARING STATEMENT .............................................................................................................. 4 PRODUCT FEATURES .................................................................................................................... 6 PRODUCT SPECIFICATIONS ........................................................................................................ 7 MAIN CHIPSET ....................................................................................................................................... 7 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 7 RECOMMENDED OPERATION CONDITIONS .......................................................................... 9 DC CHARACTERISTICS ................................................................................................................. 9 PIN ASSIGNMENT .......................................................................................................................... 10 CONNECTOR SPEC ....................................................................................................................... 10 MECHANICAL ................................................................................................................................ 11 METAL ANTENNA SPEC .................................................................................................................... 12 EEPROM INFORMATION ............................................................................................................ 13 ENVIRONMENTAL ........................................................................................................................ 13 OPERATING .......................................................................................................................................... 13 STORAGE .............................................................................................................................................. 13
Page 3/13 FCC WARING STATEMENT FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Page 4/13 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: PPQ-WN4515L ” Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. This device is operation in 5.15 – 5.25GHz frequency range, then restricted in indoor use only, Outdoor operations in the 5150~5250MHz is prohibit. This device is slave equipment, the device is not radar detection and not ad-hoc operation in the DFS band. IC WARING STATEMENT Canada, avis d'Industry Canada (IC) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)This device may not cause interference; and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This device is restricted to indoor use.
Page 5/13 OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC No. cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains transmitter module IC: 4491A-WN4515L”. Contient le module d'émission IC: 4491A-WN4515L This radio transmitter (4491A-WN4515L) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Ant. Brand Model Type Gain(dBi) 2.4G 5G 1 PSA RFMTA401029IMLB701 PIFA 2.60 3.16 2 PSA RFMTA401029IMLB701 PIFA 1.89 2.90 3 PSA RFMTA401029IMLB701 PIFA 1.75 1.99 4 PSA RFMTA401029IMLB701 PIFA 1.71 1.97 5 PSA RFMTA401029IMLB701 PIFA 1.72 1.85 6 PSA RFMTA401029IMLB701 PIFA 1.62 1.72 7 PSA RFMTA100600NNLB002 PIFA 0.52 2.66 Le présent émetteur radio (4491A-WN4515L) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Ant. Brand Model Type Gain(dBi) 2.4G 5G 1 PSA RFMTA401029IMLB701 PIFA 2.60 3.16 2 PSA RFMTA401029IMLB701 PIFA 1.89 2.90 3 PSA RFMTA401029IMLB701 PIFA 1.75 1.99 4 PSA RFMTA401029IMLB701 PIFA 1.71 1.97 5 PSA RFMTA401029IMLB701 PIFA 1.72 1.85 6 PSA RFMTA401029IMLB701 PIFA 1.62 1.72 7 PSA RFMTA100600NNLB002 PIFA 0.52 2.66
Page 6/13 The transmitter module may not be co-located with any other transmitter or antenna. Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal. Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition à des appareils mobiles (les antennes se situent à moins de 20 cm du corps d'une personne). PRODUCT FEATURES  Operate at ISM frequency Band (2.4/5GHz)  IEEE Standards Support, 802.11a, 802.11b, 802.11g, 802.11n,and 802.11ac  USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed  Enterprise level security supporting: WEP 64/128, WPA, WPA2, WAPI  Support 2 transmission and 2 receiving, transmission rate can up to 300Mbps (Physical Rate) in 802.11n; and 866.7Mbps in 802.11ac  Wi-Fi Direct supports wireless peer to peer applications  RoHS compliance  Low Halogen compliance
Page 7/13 PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Realtek 8812AU-VS-CG FUNCTIONAL SPECIFICATIONS WiFi Function Standard IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE802.11ac Bus Interface Universal Serial Bus (USB2.0) Data Rate 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz 802.11ac: MCS 0 to 8 for HT20MHz MCS 0 to 9 for HT40MHz MCS 0 to 9 for HT80MHz Media Access Control CSMA/CA with ACK Modulation Techniques 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM, 16QAM, QPSK, BPSK 802.11n: 64QAM, 16QAM, QPSK, BPSK 802.11ac: 256QAM, 64QAM, 16QAM, QPSK, BPSK Network Architecture Ad-hoc mode (Peer-to-Peer) Infrastructure mode Operation Channel 5GHz 12: – United States 19: – Europe 8: – Japan 2.4GHz 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan Frequency Range 802.11a/ac 5.15~5.85 GHz 802.11bg 2.400 ~ 2.4835 GHz Transmit Output Power – 2x2 (Tolerance: ±1.5dBm) 02.11a: 13 dBm@6-54Mbps 802.11b:
Page 8/13 15 dBm@1-11Mbps 802.11g: 14 dBm@6-54Mbps 802.11n(2.4GHz): 20MHz: 13dBm@MCS0-7 40MHz: 13dBm@MCS0-7 802.11n(5GHz): 20MHz: 12dBm@MCS0-7 40MHz: 12dBm@MCS0-7 802.11ac: 20MHz: 13dBm@MCS0-8 40MHz: 12dBm@MCS0-9 80MHz: 11dBm@MCS0-9 Receiver Sensitivity 802.11a: -85 dBm@6Mbps -70 dBm@54Mbps 802.11b: -83 dBm@11Mbps 802.11g: -86 dBm@6Mbps -70 dBm@54Mbps 802.11n(2.4GHz): 20MHz -69 dBm@MCS7 40MHz -66 dBm@MCS7 802.11n(5GHz): 20MHz -69 dBm@MCS7 40MHz -66 dBm@MCS7 802.11ac: 20MHz -63 dBm@MCS8 40MHz -60 dBm@MCS9 80MHz -57 dBm@MCS9 Security WPA, WPA2, WPS, WEP 64/128, IEEE 802.1x, IEEE 802.11i Operating Voltage 5V ±10% I/O supply voltage OS Supported Microsoft Windows Win7/Win8/Win8.1/Linux Power Consumption Test Condition: - Operate at HT40 - File Transmission Mode Average Peak 2.4G mA / W 5G mA / W 2.4G mA / W 5G mA / W TX 420mA / 2.1W 490mA / 2.45W 700mA / 3.5W 930mA / 4.65W RX 270mA / 332mA /
Page 9/13 1.35W 1.66W Unassociated Idle 22mA / 0.11W Standby@Wake up mode 20mA / 0.1W Antenna Type Metal Antenna on Board RECOMMENDED OPERATION CONDITIONS For Module Symbol Rating Min Typ Max Units VCC 5V Supply Voltage 4.5 5 5.5 V For IC Symbol Rating Min Typ Max Units VDD33 3.3V Supply Voltage 3.0 3.3 3.6 V VDD12 1.2V Supply Voltage 1.10 1.2 1.23 V DC CHARACTERISTICS Symbol Parameter Min Typ Max Units VIL Input Low Voltage - 0 0.9 V VIH Input High Voltage 2.0 3.3 3.6 V VOL Output Low Voltage 0 - 0.33 VOH Output High Voltage 2.97 - 3.3 V
Page 10/13 PIN ASSIGNMENT Pin. Pin Define Description Status 1 +3.3V 3.3V source YES 2 +3.3V 3.3V source YES 3 USB_D- USB Data- YES 4 USB_D+ USB Data+ YES 5 GND Ground YES 6 WAKE# Wake up system via wifi, low active YES 7 RESET# System reset RTL8812AU, low active YES 8 GND Ground YES CONNECTOR SPEC
Page 11/13 MECHANICAL
Page 12/13 METAL ANTENNA SPEC On Board Antenna for WiFi (Q’ty:1pcs)
Page 13/13 EEPROM INFORMATION Reg Domain US 0x25 Vendor ID 0x0BDA Product ID 0x881A ENVIRONMENTAL Operating Operating Temperature: 0 to 70 °C Relevant Humidity: 5-90% (non-condensing) Storage Temperature: -40 to 85 °C (-40 to 185 °F) Relevant Humidity: 5-95% (non-condensing)

Navigation menu