LITE ON TECHNOLOGY WN4615L 802.11n, 2.4G 1T1R Wireless LAN USB Module User Manual LiteOn Technology Corp

LITE-ON Technology Corp. 802.11n, 2.4G 1T1R Wireless LAN USB Module LiteOn Technology Corp

User Manual

Page 1/12 USER MANUAL802.11n, 2.4G 1T1R Wireless LAN USB Module WN4615L Realtek RTL8188ETV Version 1.1 Change History Revision Date Author Change List Version 1.0 2014/05/05 Ben J Chen Preliminary Version 1.1 2015/01/07 Ben J Chen Update Power Consumption Update Pin Assignment * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
Page 3/12 CONTENT PRODUCT FEATURES .................................................................................................................... 4 WI-FI FEATURE ...................................................................................................................................... 4 PRODUCT SPECIFICATIONS ........................................................................................................ 5 MAIN CHIPSET ....................................................................................................................................... 5 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 5 INRUSH CURRENT .......................................................................................................................... 6 PIN ASSIGNMENT ............................................................................................................................ 7 USB CONNECTOR SPEC ................................................................................................................. 7 MECHANICAL .................................................................................................................................. 8 BLOCK DIAGRAM ........................................................................................................................... 8 PRINTED ANTENNA SPEC ............................................................................................................. 9 EEPROM INFORMATION ............................................................................................................ 11 ENVIRONMENTAL ........................................................................................................................ 11 OPERATING .......................................................................................................................................... 11 STORAGE .............................................................................................................................................. 11 PACKING DRAWING .................................................................................................................... 11
Page 4/12 PRODUCT FEATURES Wi-Fi Feature  Operate at ISM frequency Band (2.4GHz)  IEEE Standards Support, 802.11b, 802.11g and 802.11n  CMOS MAC, Baseband PHY, and RF in a single chip for IEEE 802.11b/g/n compatible WLAN  Complies with USB Specification 2.0, support Full-speed(12Mbps) and High-Speed(480Mbps)  Enterprise level security supporting: WPA, WPA2  Support 1 transmission and 1 receiving, transmission rate can up to 150Mbps (Physical Rate) in downstream and upstream  RoHS compliance  Low Halogen compliance
Page 5/12 PRODUCT SPECIFICATIONS MAIN CHIPSET Realtek RTL8188ETV FUNCTIONAL SPECIFICATIONS Wi-Fi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface USB 2.0 Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 7 for HT20MHz MCS 0 to 7 for HT40MHz Media Access Control CSMA/CA with ACK Modulation Techniques 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM, 16QAM, QPSK, BPSK 802.11n: 64QAM, 16QAM, QPSK, BPSK Network Architecture Ad-hoc mode (Peer-to-Peer) Infrastructure mode Operation Channel 2.4GHz 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan Frequency Range 802.11bg 2.400 ~ 2.4835 GHz Transmit Output Power – 1x1 (Tolerance: ±1.5dBm) 802.11b: 15 dBm@1Mbps 15 dBm@11Mbps 802.11g: 14 dBm@6Mbps 14 dBm@54Mbps 802.11n: 20MHz: 14 dBm@MCS0 14 dBm@MCS7 40MHz: 12 dBm@MCS0 12 dBm@MCS7 Receiver Sensitivity 802.11b: -82 dBm@11Mbps 802.11g: -69 dBm@54Mbps 802.11n: 20MHz
Page 6/12 -68 dBm@MCS7 40MHz -65 dBm@MCS7 Security WEP 64&128 bit, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS, IEEE 802.1X, IEEE 802.11i Operating Voltage 3.3 V ±9% I/O supply voltage OS Supported Microsoft Windows Win7/Win8/Win8.1; Linux based Power Consumption Test Condition: - Operate at HT40 - File Transmission Average Max TX Mode: 300 mA RX Mode: 180 mA Standby Mode: 160 mA 600mA Antenna Type Printed Antenna INRUSH CURRENT The MAX is about 1.45A and during time is about 1.7us.
Page 7/12 PIN ASSIGNMENT USB CONNECTOR SPEC Pin. Pin Define Status 1 +3.3V YES 2 USB_D- YES 3 USB_D+ YES 4 GND YES
Page 8/12 MECHANICAL BLOCK DIAGRAM
Page 9/12 PRINTED ANTENNA SPEC
Page 10/12 MODULE PHOTO Top Side Bottom Side
Page 11/12 EEPROM INFORMATION Reg Domain WorldWide13 Channels 1-11 with active scan, 12-13 with passive scan 0x20 Vendor ID 0x0BDA Device ID 0x0179 ENVIRONMENTAL OPERATING Operating Temperature: 0 to 70 C (32 to 158 F) Relative Humidity: 5-90% (non-condensing) STORAGE Temperature: -40 to 80 C (-40 to 176 F) Relative Humidity: 5-95% (non-condensing) PACKING DRAWING Tray
Page 12/12
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Information to OEM integrator The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. 1. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter product
transmitter product procedures. 2. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device. 3. The regulatory label on the final system must include the statement: “Contains FCC ID:PPQ-WN4615L “. 4. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented twoways authentication between module and the host system.

Navigation menu