LIVALL Tech BH6X Bling Helmet User Manual 15 BH60 UserMan

Shenzhen Qianhai Livall LOT Technology Co., Ltd. Bling Helmet 15 BH60 UserMan

15_BH60 UserMan

Smart Safety HelmetI. IntroductionThis smart safe-riding helmet (hereinafter referred to as “BlingHelmet”) is made of the lightest and safest materials, whichmakes it more comfortable and safer. Its fine ventilatingstructure inside enables air to flow smoothly through so as toachieve the best cooling effect. It also has Bluetooth speakers,and warning tail light.II. Packing listOne helmet                            One hag tagOne USB charging cable       One warranty cardOne product instructionIII. Wearing instructionUsage:This safety helmet adopts a fixed setting, easy to operate,putting on or taking off the helmet only with the buckle.Flatten the drawstrings on both sides and make themclinging to your face,  buckle up it when the helmet is tightlyput on. If the drawstrings become loose, please take off thehelmet and adjust them properly. When adjusting thedrawstrings, please use one hand to fix the buckle and thenadjust the drawstrings with proper tightness. If you want tostrengthen the rear drawstring, pull it tight from its back, useone hand to fix the helmet and another one to fix thedrawstring under the chin and adjust the four drawstrings toa most appropriate position.Proper wearingThe helmet must be worn closely to your head. If you wantto lower the front to cover your forehead, you could makethe drawstring close to your chin and loose the reardrawstring; if you want to heighten the front of the helmet,loose the drawstring and tighten the rear drawstring.Comfort adjustment:In order to check the tightness of the helmet, you could puton the helmet and buckle up it, open your mouth to feelwhether the drawstrings are closely attached to your chin,and then move your helmet forward and backward, if thehelmet becomes loose, then the tightness of the drawstringmust be strengthened and make sure that the thickness ofthe pad is proper. The helmet could not be able to moveforth and back much distance; the helmet could not be takenoff if the buckle is not opened. Note: It is necessary toreaffirm whether the helmet is in a good condition every timeyou wear.Connecting to Bluetooth earphone:Connect the bluetooth with your smart phone when first-useor when change to another smart phone;When the device ispower off, long press “” till you hear the “ready to pair”sounds, means the device starts matching; scan the devicewith your phone which the Bluetooth is available. and click itto connect when spotting the equipment of “BH60”. Thespeakers on both sides will make the noise of “matchingcompleted” when the connection is completed;The bluetoothwill be connected automatically next time.Answer and hang up calls:When there’s an incoming call, the device would give outnotification voice, press “” to answer the call and long pressfor 1S to reject; during calls, press “” to hang up.Redial calls:When the device is powered, quick press “” twice to dial thelast number.helmet is suitable for you and could be tightly wore. Checkthe adjustment again every time you wear to ensure that thehelmet could be closely put on your head.IV. Operating InstructionStart up:Long press “” for 2s till you hear the “power on” sounds,meanwhile the outline light and tail light will flash twice in orange.Power off:When the device is in a state of working, long press “” tillyou hear the “power off” sounds, meanwhile the outline lightand tail light would flash once in orange.CheckingMake sure that the helmet must be put on your headcorrectly and firmly . Readjust the tightness of thedrawstrings to a proper position if the helmet still shakes.For the best protection effect, please make sure that theBackRear drawstringAdjustment buckleBuckleFront drawstringBrimButton”Button “+”Button“-”Warning tail lightBluetooth speakerCharging portFrontV. PrecautionsTemperatureThe safety helmet would be damaged under/over 150 0F(65.6 0C). Under hot weather, if the helmet is put in darkvehicle or storage bag, its temperature would be evenhigher. Heat would incur irregular misshaping to the surfaceof the helmet, like bubbling or pits. If this happens, pleasediscard this helmet immediately and replace it with a newone. To insure a proper use of this helmet, please carefullyread this Instruction before use so as to get to know thefeatures, performance, wearing, maintenance and otheraspects of the product.Safety precautionsThis helmet is designed to burden damages and injuriesfrom external impact. Although such injury may seem minor,it could damage the helmet. If the helmet is damaged fromfalling or other causes, please discard the helmet andreplace it with a new one. Some accidents are unavoidablefor whatever safety helmet and the damaging degree maydiffer from the impacting; even at a slow speed, severe headinjuries or life threatening damages may occur. So pleasemake sure that you’ve completely and carefully read thisInstruction and have arranged all possible protectionsbefore riding the bike, scooter or wearing the roller skates.Speaker usage instructionsThis product is equipped with Bluetooth speakers, andtaking calls during riding may distract the user’s attention, soit is suggested that distracting functions like calls and voicesbe used after the bike is stopped; listening to music duringriding may affect user’s attention to surrounding sounds,which may bring potential safety hazards, so it is suggestedthat the volume be lowered.WarningsThis safety helmet is specially designed for bikes, so pleasedon’t use it on other mobile vehicles, like motor cars ormotor bikes. No safety helmet could completely avoid allunpredicted impacting, but for the best protection effect, thesize of the helmet must be proper and the buckle must betightly buckled. Unless advised by the manufacturer, pleaserefrain from modify or remove any part of the helmet.Children should refrain from using during climbing or otheractivities, in case of getting trapped or entangled fromwearing this helmet.Water warningsThis product is only resistant to short period rainfall, so toavoid any malfunctions, please try to avoid riding duringraining.VI. Trouble-shooting of electronic functionsDuring use or after impact (without misshaping orcracking), if the following functions go wrong, please followthe steps to fix them; If failed, please contact the after-saleservice center.Malfunctions1. Unable to get started up2. When starting up, only heard the start up notificationsound but no indication of flashing outline lights3. After start up, it automatically powers off after a shortperiod of use (maybe the battery is low)4. After unplugging the charging cable, the charging light isstill on and rebooting could not fix it.5. Start up is normal, but the speaker has no notificationsound or has just single tone or noises.Trouble shooting steps1. Charging for 1 to 2 hours2. Check the tail light, main control (within the brim) and theinner side of two speakers to see whether there’re clearcracks, if does, please manually push it in.3. Factory reset, hold “” till the outline light shows white,and about 20 seconds later, the white light wouldautomatically fade away and the product is reset. And thenstart it up, if the trouble is not fixed, please contact the aftersales center.VII. Appendix Technical specifications:Bluetooth:Bluetooth distance:    Max 10mSpeaker:                    Stereo 2*0.5WMic:                           -39dB microphoneTail light:                    8 +6 color LEDButtons:                     three buttons,                                  start up (play, pause, power off),                                  volume + (next song),                                  volume – (previous song)Charging port:           MicroUSBElectricity parameter: DC 5V/0.5ABattery capacity:       380mAH (1.4WH)Charging time:          1.5hBattery life:                >10hStandby duration:      >180 daysProduct size:             285*230*150Product weight: 279g±5%Music player:When the device is powered, press “” to play music (needto open the music player APP in your phone before thisoperation). Long press “-” to play the previous song and “+”the next song.Volume adjustment:During music playing or taking calls, press “+” to increasevolume while “-” to decreaseNotification voice switches of Bluetooth speaker:The default setting is English. When the product is powered,first hold “-” and then press “+” to cycle switch languages,from EnglishChineseFrenchSpanish; when thelanguage is selected, loose “-”.Charging:Use the USB cable to connect the USB port beneath the taillight to the charger with USB (DC 5V) port. When it’sconnected, the two indicator lights in the middle of the taillight would flash red (no such indicator under normalstandby state) and green when the charging is done. Theelectricity of the charger is suggested to be > 1A and thecharging time about 3.5h.Factory Reset:Hold “” till the outline light shows white, and about 20seconds later, the white light would automatically fade awayand the product is reset.After-Sales Information:Thank you for purchasing LIVALL product, please read the followinginstructions for better service1. The warranty time is 1 year after purchase. Any quality problem canbe maintained free or it can be replaced within 3 months afterpurchase if re-sale is available.2. Damages caused by the following reasons are not included in thescope of free warranty:Exceeding the specified warranty period;Damages caused by unsuitable operation;Damages caused by user removing or repairing it by themselves aswell as other man-made damages.3. This warranty card is the important certificate for the warrantyservice provided to the end user, please keep it well. The card shouldbe taken along with the product to the manufacturer when themaintenance is required.4. Our company reserves the rights to modification and explanation forabove terms and conditions.Please visit www.livall.com for more information.User Name: ____________________________________________Tel.:___________________________________________________ID No.: ________________________________________________Home Address: _________________________________________Seller:_________________________________________________Purchase Date: _________________________________________Maintenance Record:______________________________________________________Note: This form should be completed in real details, otherwise, itwould be invalid.After-Sales Service Warranty CardSmart Safety HelmetDesigned and Assembled in Shenzhen ChinaModel:BH60NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the following twoconditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation.Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.

Navigation menu