LIVALL Tech RSX Smart Ski Helmet User Manual 15 RS1 UserMan

LIVALL Tech Co., Ltd. Smart Ski Helmet 15 RS1 UserMan

15_RS1 UserMan

www.livall.comFCCID:2AEKFRSXImportant Information and Warranty Card
-2-I. Introduction and DeclarationBefore using a LIVALL helmet, please read all operating instructions and safety information in this Manual to ensure safe and proper use.LIVALL adheres to a strategy of sustainable development. This Manual (i.e., the Important Information and Warranty Card) will be updated from time to time, therefore, LIVALL reserves the right to make changes and improvements to any of the products described herein. The content of the Instructions shall be provided subject to the status of the products being manufactured. Unless otherwise specied in the applicable law, no explicit or tacit guarantee shall be made to the accuracy, reliability and content of this document.LIVALL reserves all rights. Without the prior written permission from LIVALL, it is prohibited to reproduce, deliver, distribute and store the contents of this document in any form.In case any problems are encountered while using this product, please contact our after-sales service for assistance.Product availability and related software and accessories may vary by region. For details, please consult our local distributors.The product may contain components and technical software that are controlled by export laws and regulations of China as well as other countries and regions. Any transfer in violation of the law is prohibited.LIVALL Important Information and Warranty CardPlease read the Manual before using the product and keep it for future reference.
-3-Please read the following simple guidelines. Failure to comply with these guidelines may be dangerous or break the law. 1.  Keep the product out of reach of children and pets: Keep the product and all components out of reach of children and pets. Children and pets may swallow small parts, which may cause choking or other dangers.2.  Turn on only when safe:  When use of electronic products is restricted or their use will cause interference or danger, please do not turn on the product.3.  Interference:  All wireless devices may be susceptible to interference, which could aect performance.4.  Turn o the helmet near medical equipment:  Hospitals and healthcare facilities may use devices that are sensitive to wireless frequencies. Please follow all regulations.5.  Helmet should be switched o on aircraft:  Please comply with all related restrictions as wireless devices may interfere with aircraft systems.6.  Helmet should be switched o in gas stations:  Please do not use this product in gas stations or in areas near fuels, chemicals, etc.7.  Helmet should be switched o in areas near where blasting is being carried out: Comply with all related regulations and do not use this product in areas where blasting is in progress.8.  Accessories and batteries:  II.Safety Precautions
-4-1.  Do not dispose of used batteries in general waste. For areas where there are regulations on recycling and disposal of used batteries, please comply with the related local regulations and help protect the environment.2.  Do not short circuit the batteries. When a metallic object (such as keys, jewelry, wires, coins or other conductive materials) inadvertently connects the positive and negative terminals of the batteries, a short circuit will occur. A short circuit may damage the battery or the connector, and may result in property damage or personal injury. Please put charged batteries in an appropriate place, paying particular attention to those in your pocket, wallet or other place where there might be metal objects.3.  Do not throw batteries into a re or place them in a high temperature environment so as to avoid battery leakage, overheating, explosion or re.4.  Do not disassemble, solder or modify the batteries; do not put the battery in locations subject to strong mechanical impact or hit the battery with a hard object, which will cause battery leakage, III.Safety Precautions for Battery Use Use only our approved accessories and batteries as other accessories and batteries may damage the product and be dangerous.9.  Connecting to other devices:  When connecting the product to other devices, read the instructions of the other device for detailed safety instructions. Do not connect incompatible products.
-5-overheating, explosion or re.5.  It is strictly prohibited to disassemble, crush, heat or burn built-in batteries; sharp objects, screwdrivers, etc. are forbidden from piercing or prying open the batteries. These actions may cause the battery to ignite or burn.6.  If a battery's electrolyte gets into your eyes, there is a risk of blindness. If the electrolyte is accidentally splashed into your eyes, do not rub your eyes. Immediately flush thoroughly with clean water and contact a hospital for treatment; in case a weak battery's electrolyte comes into contact with skin or clothes, wash immediately with soap and clean water, and consult a doctor immediately if necessary.7.  Do not use the battery for other purposes. Never use a damaged charger or battery. In case of overheating, discoloration, deformation, bulging, leakage and other anomalies that occur when batteries are in use, being charged or in storage, please stop using and replace so as to avoid safety issues.8.  Batteries are not waterproof. Do not use or charge a battery in the kitchen, bathroom or other hot and humid location.9.  When a battery is being charged, its temperature will rise. Please do not put the battery and combustibles (e.g.: bedding, clothing, books, etc.) together in case of re.1.  For your safety, please use original accessories approved by LIVALL. Accessories can be purchased from local distributors authorized by LIVALL.V.Other Important Safety Information
-6-2.  Do not charge the helmet continuously for more than 12 hours.3.  Unqualied persons must not disassemble this product, its batteries or other accessories. In case of any malfunction in the product, its batteries or accessories, please contact LIVALL’s local sales center.1.  Do not use or store the product in dusty or dirty areas as dust may cause the product to malfunction.2.  Do not use or store the product in very hot areas. High temperatures will shorten the life of electronic devices, damage batteries and warp or melt certain plastics.3.  Do not use or store the product in extremely cold areas. Otherwise, when the ambient temperature is raised to room temperature, moisture will form inside the device, damaging the circuit board.4.  Please avoid dropping, knocking or shaking the product. Rough treatment will damage its internal functions, degrade its protective eectiveness or damage its internal electronic components.5.  Do not keep a fully charged battery connected to a charger for extended periods of time as overcharging may shorten the battery's life.VI.Products and Accessories
-7-Table of Toxic or Hazardous Substances, Elements and Contents. Environmental Protection Use Period of the Parts:Product – 3 years; battery – 5 years; accessories – 10 yearsThe Environmental Protection Use Period marked on this product indicates the safe period of use for the product under conditions of use specied in this Manual without toxic or hazardous substance leakage.VII.Environmental Protection Information Toxic or Hazardous Substances and ElementsPart NameBody Battery Accessories(Pb) X X X(Hg) O O O(Cd) O O O(Cr6+) O O O(PBB) O O O(PBDE) O O O
-8-By embracing the principle of "The Customer is the Focus", we fully protect your rights. Please note the following information:1.  Please bring your valid warranty certicate and original invoice, which shall be completed by the distributor of the helmet and stamped with the ocial seal, and may not be altered, otherwise it will be deemed as invalid. The serial number sticker on the helmet shall not be destroyed, otherwise the warranty will be invalidated.2.  If the product is eligible for replacement, only the faulty part(s) may be replaced; if the battery was at fault, only the battery will be replaced;  other parts such as the decorative nameplate and packaging materials may not be replaced;  Consumable parts should be replaced for a fee.3.  In case of any damage due to reasons unrelated to the quality of the product (i.e. exposure to severe dampness and liquid, damages from drops or falls and improper use, etc.); or any damage to the product due to unauthorized disassembly; or taking to any other repair centers not designated by LIVALL; or any product beyond warranty period; LIVALL will provide maintenance and repair services and charge an appropriate fee accordingly.4.  Some problems might be incurred by exposure to severe dampness and liquid, severe damages and any alteration or modification. In cases where the product can be used normally before maintenance, but performs abnormally thereafter, it shall be deemed as an unrecoverable fault, for which LIVALL will not be responsible for returning the product to its former condition.5.  In order to provide better service for you, please take good care of your warranty card, purchase certicate and maintenance documents.Tips for Using the Warranty Card
-9-1.  If there is any discrepancy or omission between the following and any national policy, the national policy shall prevail.2.  The warranty time is 1 year after purchase. Any quality problem can be maintained for free or it can be replaced within 30 days after purchase if re-sale is available.3.  LIVALL bears no responsibility for warranty over other product components. i.e, the Quick Start Guide, Warranty Card, etc.LIVALL's Warranty DetailsI.Warranty DetailsThe warranty services are only valid under conditions of normal use. In case of any damage caused by reasons unrelated to product quality or any of the following circumstances, warranty services shall not be provided. But paid maintenance may be carried out:1.  The warranty period expires;2.  There is no valid invoice or warranty certicate, unless it can be otherwise proved that the product is within the validity date of the warranty period;3.  The details on the warranty certicate do not match the specic goods or are altered;4.  Any damage caused by use, maintenance or care that contravenes the guidelines of the product's instruction manual;5.  Any damage caused due to disassembly by non- LIVALL designated service centers;6.  Any damage caused by force majeure;7.  The product's natural wear and tear, such as on housing, buttons, paint, accessories, etc.8.  Any malfunction, defect or aw not caused by LIVALL.II.Warranty Description
-10-This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is onnected.-Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.NOTE
-11-LIVALL CANNOT AND DOES NOT WARRANT THAT AN INDIVIDUAL WHO SUFFERS A COLLISION, FALL, OR OTHER BLOW TO THE HEAD OR PERSON WHILE WEARING THIS HELMET EQUIPPED WITH THE LIVALL SMART SKI HELMET WILL NEVER SUFFER ANY CONCUSSION OR OTHER INJURIES. USER ACKNOWLEDGES THAT NO HELMET(INCLUDING THIS HELMET) CAN PROTECT USER FROM ANY AND ALL INJURIES AND USER ASSUMES ALL RISKS, INCLUDING ALL RISKS OF BODILY INJURY OR DEATH, ARISING OUT OF USER'S PARTICIPATION IN ATHLETIC, RECREATIONAL AND OTHER ACTIVITIES WHILE WEARING THIS HELMET. TO THE EXTENT PERMITTED BY APPLICABLE LAW, LIVALL EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED WITH RESPECT TO THIS HELMET, OTHER THAN THOSE EXPRESSLY MADE BY LIVALL SMART SKI HELMET.DISCLAIMERLIVALL(NZ) SPORTS TECH LIMITEDADD: 62 JEFFS ROAD, DAIRY FLAT HIGHWAY, AUCKLAND 0794, NEW ZEALAND
-12-Article 12Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. Article 14The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.The said legal communications means radio communications is operated in compliance with the Telecommunications Act.The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.Administrative Regulations on Low Power Radio Waves Radiated Devices warning
-13-Designed and Manufactured in Shenzhen, ChinaOriginal design manufacturer:  Shenzhen Qianhai LIVALL IoT Technology Co., Ltd.Address:       904, R&D Building Tsinghua Hi-Tech Park, NanShan, Shenzhen, ChinaPostal code:     518057Website:     www.livall.comE-mail:     riding@livall.comFor support or assistance, contact:  support@livall.comNotied Body: ITS Testing Services (UK) Ltd., Centre Court, Meridian Business Park, Leicester LE19 1WD No. 0362
-14-Product model  ________________ Related accessories  ______________________Bar code of product  ________________ Bar code of accessories  ______________________Distributor's name (with seal upon purchase)  ________________________________________Purchase date  ________________  Other info.  _______________________________Customer name  ________________  Tel. (with area code)  ______________________Correspondence address  ________________ Postcode _______________________________Invoice No.  ___________________________________________________________________Description of the fault(s)   _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________LIVALL Warranty CardTo Be Completed Upon PurchaseBelow Is To Be Completed By Customer
-15-
-16-BH6X-IO-V1.4

Navigation menu