LIVALL Tech RSX Smart Ski Helmet User Manual 15 RS1 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3961312
Application ID	v9Tz0e6QUtGMd/r7RBoWXA==
Document Description	15_RS1 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.93kB (374104 bits)
Date Submitted	2018-08-13 00:00:00
Date Available	2018-08-13 00:00:00
Creation Date	2018-07-03 18:46:07
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-07-03 18:46:07
Document Title	15_RS1 UserMan
Document Creator	Adobe InDesign CC 2017 (Windows)

Important Information
and Warranty Card
FCCID：2AEKFRSX
www.livall.com
LIVALL Important Information and Warranty Card
Please read the Manual before using the product and keep it for future reference.
I. Introduction and Declaration
Before using a LIVALL helmet, please read all operating instructions and safety information in this Manual
to ensure safe and proper use.
LIVALL adheres to a strategy of sustainable development. This Manual (i.e., the Important Information and
Warranty Card) will be updated from time to time, therefore, LIVALL reserves the right to make changes
and improvements to any of the products described herein. The content of the Instructions shall be
provided subject to the status of the products being manufactured. Unless otherwise specified in the
applicable law, no explicit or tacit guarantee shall be made to the accuracy, reliability and content of this
document.
LIVALL reserves all rights. Without the prior written permission from LIVALL, it is prohibited to reproduce,
deliver, distribute and store the contents of this document in any form.
In case any problems are encountered while using this product, please contact our after-sales service for
assistance.
Product availability and related software and accessories may vary by region. For details, please consult
our local distributors.
The product may contain components and technical software that are controlled by export laws
and regulations of China as well as other countries and regions. Any transfer in violation of the law is
prohibited.
-2-
II.Safety Precautions
Please read the following simple guidelines. Failure to comply with these guidelines may be dangerous or
break the law.
Keep the product out of reach of children and pets:
1.
Keep the product and all components out of reach of children and pets. Children and pets may
swallow small parts, which may cause choking or other dangers.
Turn on only when safe:
2.
When use of electronic products is restricted or their use will cause interference or danger, please
do not turn on the product.
Interference:
3.
All wireless devices may be susceptible to interference, which could affect performance.
Turn off the helmet near medical equipment:
4.
Hospitals and healthcare facilities may use devices that are sensitive to wireless frequencies. Please
follow all regulations.
Helmet should be switched off on aircraft:
5.
Please comply with all related restrictions as wireless devices may interfere with aircraft systems.
Helmet should be switched off in gas stations:
6.
Please do not use this product in gas stations or in areas near fuels, chemicals, etc.
Helmet should be switched off in areas near where blasting is being carried out:
7.
Comply with all related regulations and do not use this product in areas where blasting is in
progress.
Accessories and batteries:
8.
-3-
9.
Use only our approved accessories and batteries as other accessories and batteries may damage
the product and be dangerous.
Connecting to other devices:
When connecting the product to other devices, read the instructions of the other device for
detailed safety instructions. Do not connect incompatible products.
III.Safety Precautions for Battery Use
Do not dispose of used batteries in general waste. For areas where there are regulations on
1.
2.
3.
4.
-4-
recycling and disposal of used batteries, please comply with the related local regulations and help
protect the environment.
Do not short circuit the batteries. When a metallic object (such as keys, jewelry, wires, coins or other
conductive materials) inadvertently connects the positive and negative terminals of the batteries, a
short circuit will occur. A short circuit may damage the battery or the connector, and may result in
property damage or personal injury. Please put charged batteries in an appropriate place, paying
particular attention to those in your pocket, wallet or other place where there might be metal
objects.
Do not throw batteries into a fire or place them in a high temperature environment so as to avoid
battery leakage, overheating, explosion or fire.
Do not disassemble, solder or modify the batteries; do not put the battery in locations subject to
strong mechanical impact or hit the battery with a hard object, which will cause battery leakage,
5.
6.
7.
8.
9.
overheating, explosion or fire.
It is strictly prohibited to disassemble, crush, heat or burn built-in batteries; sharp objects,
screwdrivers, etc. are forbidden from piercing or prying open the batteries. These actions may
cause the battery to ignite or burn.
If a battery's electrolyte gets into your eyes, there is a risk of blindness. If the electrolyte is
accidentally splashed into your eyes, do not rub your eyes. Immediately flush thoroughly with
clean water and contact a hospital for treatment; in case a weak battery's electrolyte comes into
contact with skin or clothes, wash immediately with soap and clean water, and consult a doctor
immediately if necessary.
Do not use the battery for other purposes. Never use a damaged charger or battery. In case of
overheating, discoloration, deformation, bulging, leakage and other anomalies that occur when
batteries are in use, being charged or in storage, please stop using and replace so as to avoid safety
issues.
Batteries are not waterproof. Do not use or charge a battery in the kitchen, bathroom or other hot
and humid location.
When a battery is being charged, its temperature will rise. Please do not put the battery and
combustibles (e.g.: bedding, clothing, books, etc.) together in case of fire.
V.Other Important Safety Information
For your safety, please use original accessories approved by LIVALL. Accessories can be purchased
1.
from local distributors authorized by LIVALL.
-5-
2.
3.
Do not charge the helmet continuously for more than 12 hours.
Unqualified persons must not disassemble this product, its batteries or other accessories. In case
of any malfunction in the product, its batteries or accessories, please contact LIVALL’s local sales
center.
VI.Products and Accessories
Do not use or store the product in dusty or dirty areas as dust may cause the product to
1.
2.
3.
4.
5.
-6-
malfunction.
Do not use or store the product in very hot areas. High temperatures will shorten the life of
electronic devices, damage batteries and warp or melt certain plastics.
Do not use or store the product in extremely cold areas. Otherwise, when the ambient temperature
is raised to room temperature, moisture will form inside the device, damaging the circuit board.
Please avoid dropping, knocking or shaking the product. Rough treatment will damage its internal
functions, degrade its protective effectiveness or damage its internal electronic components.
Do not keep a fully charged battery connected to a charger for extended periods of time as
overcharging may shorten the battery's life.
VII.Environmental Protection Information
Table of Toxic or Hazardous Substances, Elements and Contents.
Environmental Protection Use Period of the Parts:
Product – 3 years;
battery – 5 years;
accessories – 10 years
The Environmental Protection Use Period marked on this product indicates the safe period of use for the
product under conditions of use specified in this Manual without toxic or hazardous substance leakage.
Toxic or
Hazardous Body
Substances
and
Elements
(Pb)
Part Name
Battery Accessories
(Hg)
(Cd)
(Cr6+)
(PBB)
(PBDE)
-7-
Tips for Using the Warranty Card
By embracing the principle of "The Customer is the Focus", we fully protect your rights. Please note the
following information:
Please bring your valid warranty certificate and original invoice, which shall be completed by the
1.
distributor of the helmet and stamped with the official seal, and may not be altered, otherwise it
will be deemed as invalid. The serial number sticker on the helmet shall not be destroyed, otherwise
the warranty will be invalidated.
If the product is eligible for replacement, only the faulty part(s) may be replaced; if the battery
2.
was at fault, only the battery will be replaced; other parts such as the decorative nameplate and
packaging materials may not be replaced; Consumable parts should be replaced for a fee.
In case of any damage due to reasons unrelated to the quality of the product (i.e. exposure to
3.
severe dampness and liquid, damages from drops or falls and improper use, etc.); or any damage to
the product due to unauthorized disassembly; or taking to any other repair centers not designated
by LIVALL; or any product beyond warranty period; LIVALL will provide maintenance and repair
services and charge an appropriate fee accordingly.
Some problems might be incurred by exposure to severe dampness and liquid, severe damages
4.
and any alteration or modification. In cases where the product can be used normally before
maintenance, but performs abnormally thereafter, it shall be deemed as an unrecoverable fault, for
which LIVALL will not be responsible for returning the product to its former condition.
In order to provide better service for you, please take good care of your warranty card, purchase
5.
certificate and maintenance documents.
-8-
LIVALL's Warranty Details
I.Warranty Details
If there is any discrepancy or omission between the following and any national policy, the national
1.
2.
3.
policy shall prevail.
The warranty time is 1 year after purchase. Any quality problem can be maintained for free or it can
be replaced within 30 days after purchase if re-sale is available.
LIVALL bears no responsibility for warranty over other product components. i.e, the Quick Start
Guide, Warranty Card, etc.
II.Warranty Description
The warranty services are only valid under conditions of normal use. In case of any damage caused by
reasons unrelated to product quality or any of the following circumstances, warranty services shall not be
provided. But paid maintenance may be carried out:
The warranty period expires;
1.
There is no valid invoice or warranty certificate, unless it can be otherwise proved that the product
2.
is within the validity date of the warranty period;
The details on the warranty certificate do not match the specific goods or are altered;
3.
Any damage caused by use, maintenance or care that contravenes the guidelines of the product's
4.
instruction manual;
Any damage caused due to disassembly by non- LIVALL designated service centers;
5.
Any damage caused by force majeure;
6.
The product's natural wear and tear, such as on housing, buttons, paint, accessories, etc.
7.
Any malfunction, defect or flaw not caused by LIVALL.
8.
-9-
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is onnected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
-10-
DISCLAIMER
LIVALL CANNOT AND DOES NOT WARRANT THAT AN INDIVIDUAL WHO SUFFERS
A COLLISION, FALL, OR OTHER BLOW TO THE HEAD OR PERSON WHILE WEARING
THIS HELMET EQUIPPED WITH THE LIVALL SMART SKI HELMET WILL NEVER
SUFFER ANY CONCUSSION OR OTHER INJURIES. USER ACKNOWLEDGES THAT
NO HELMET(INCLUDING THIS HELMET) CAN PROTECT USER FROM ANY AND ALL
INJURIES AND USER ASSUMES ALL RISKS, INCLUDING ALL RISKS OF BODILY INJURY
OR DEATH, ARISING OUT OF USER'S PARTICIPATION IN ATHLETIC, RECREATIONAL
AND OTHER ACTIVITIES WHILE WEARING THIS HELMET. TO THE EXTENT PERMITTED
BY APPLICABLE LAW, LIVALL EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY
KIND, EXPRESS OR IMPLIED WITH RESPECT TO THIS HELMET, OTHER THAN THOSE
EXPRESSLY MADE BY LIVALL SMART SKI HELMET.
LIVALL(NZ) SPORTS TECH LIMITED
ADD: 62 JEFFS ROAD, DAIRY FLAT HIGHWAY, AUCKLAND 0794, NEW ZEALAND
-11-
Administrative Regulations on Low Power Radio Waves Radiated Devices warning
Article 12
Without permission granted by the NCC, any company, enterprise, or user is not allowed to change
frequency, enhance transmitting power or alter original characteristic as well as performance to a
approved low power radio-frequency devices.
Article 14
The low power radio-frequency devices shall not influence aircraft security and interfere legal
communications; If found, the user shall cease operating immediately until no interference is achieved.
The said legal communications means radio communications is operated in compliance with the
Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal
communications or ISM radio wave radiated devices.
-12-
Designed and Manufactured
in Shenzhen, China
Notified Body:
ITS Testing Services (UK) Ltd., Centre Court, Meridian Business Park, Leicester LE19 1WD No. 0362
Original design manufacturer:
Shenzhen Qianhai LIVALL IoT Technology Co., Ltd.
Address: 			
904, R&D Building Tsinghua Hi-Tech Park, NanShan, Shenzhen, China
Postal code: 		
518057
Website: 		www.livall.com
E-mail:
		riding@livall.com
For support or assistance, contact: support@livall.com
-13-
LIVALL Warranty Card
To Be Completed Upon Purchase
Product model
________________
Related accessories
Bar code of product
________________
Bar code of accessories ______________________
______________________
Distributor's name (with seal upon purchase)
________________________________________
Purchase date
Other info. _______________________________
________________
Below Is To Be Completed By Customer
Customer name
________________
Tel. (with area code)
Correspondence address
________________
_______________________________
______________________
Postcode
Invoice No. ___________________________________________________________________
Description of the fault(s)
_________
_________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
-14-
-15-
BH6X-IO-V1.4
-16-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Create Date                     : 2018:07:03 18:46:07+08:00
Metadata Date                   : 2018:07:03 18:46:07+08:00
Modify Date                     : 2018:07:03 18:46:07+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:ddba00db-34c1-43ed-9772-205f6898e713
Original Document ID            : xmp.did:f63bbd53-94f3-7242-acc9-949b11909344
Document ID                     : xmp.id:9085aa3f-7de6-a649-9ccf-58ea5cd7670d
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:cfe4996b-88d4-2149-ac8b-06a08408ec48
Derived From Document ID        : xmp.did:f0db32e0-6e4b-fa4b-9b94-e07cf2b0a52b
Derived From Original Document ID: xmp.did:f63bbd53-94f3-7242-acc9-949b11909344
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2018:07:03 18:46:07+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CC 2017 (Windows)

EXIF Metadata provided by EXIF.tools