LM Technologies LM930-XXXX Bluetooth Smart Module 4.1 - LM930 User Manual LM930 DATASHEET

LM Technologies Ltd. Bluetooth Smart Module 4.1 - LM930 LM930 DATASHEET

User Manual

LM930Page 1 of 4 +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.comOverviewFeaturesLM930 Bluetooth BLE 4.1 Smart ModuleUART Class 1 with UFL Receptical Part NoRevisedProduct04/MAY/2016930-0633LM930128KB memory: 64KB RAM and 64KB ROMBluetooth ® v4.1 specification9dBm Bluetooth low energy maximum transmit output power Support for Bluetooth v4.1 specification host stackincluding ATT, GATT, SMP, L2CAP, GAPRSSI monitoring for proximity applications<900nA current consumption in dormant modeLow Power 32kHz and 16MHz crystalSwitch-mode power supplyProgrammable general purpose PIO controllerWake-up interrupt and watchdog timer12 digital PIOs3 analogue AIOsUART4 PWM modules10-bit ADCThe LM930 is a highly power efficient stand alone module, combining both the host micro controller and Bluetooth radio into a single package. You can connect your peripheral sensors and devices directly to the LM930 and use it to host your application code, thus eliminating the need for an extra MCU. Furthermore LM offer a range of available Bluetooth Smart profile templates which we can customise to your specification and can offer applications such as iBeacon to be pre-installed.For production, LM can provide modules with your firmware and settings preloaded, simplifying your manufacturing and testing process. The LM930 comes with a U.FL/IPEX connector for attaching an antenna. With a battery added to the LM930 and placed into a housing, this module can also act as an iBeacon device awaiting instruction/ data, or to pass on instruction/data automatically when in range of other BLE enabled devices.LM has been creating long distance Bluetooth Modules and Adapters for over 10 years, with our experience we have developed a new Long Range BLE Module, utilising an antenna with superior performance comparable to common IC or meander alternatives, ideally suited for distances up to 500m and beyond.NB: Antenna variant suject to change without notice.10mm22mm2.8mmTECHNOLOGIES
Alert TagAutomotive KeyfobBeaconBlood Pressure SensorCycling Speed and Cadence SensorEnvironment SensorGlucose SensorHealth ThermometerHearth Rate SensorKeyboardMultifunction Steering WheelMouseRunning Speed and Cadence SensorSecurity TagSerial CommunicationTime ClientTemperature and PressureWeight Scale930-0633 M SMT PROG BT4.1 300Kbps UART SPI I2C 1.2-4.4V 9.3dB UFL TRAY930-0635 MOD SMT PROG BT4.1 300Kbps UART SPI I2C 1.2-4.4V 9 T&RGeneral SpecificationApplication Templates IncludedPackagingLM930 Bluetooth BLE 4.1 Smart ModuleUART Class 1 with UFL Receptical Part NoProduct930-0633LM930ChipsetClassSpeed / BandwidthRangeInterfaceStandard BluetoothFrequencyHoppingProfiles SupportedFirmwareRx SensitivityTx Output PowerCurrent ConsumptionAntenna GainPower SupplyWeightOperating TemperatureStorage TemperatureDimensionsCSR 1012BLE Smart Class 1Up to 1Mbps (0.27Mbps throughput) 0m - 500m estimated with 2Dbi AntennaUART ( I²C + SPI for peripherals )4.12.400 to 2.4835 GHzAdaptive/sec 2MHz channel spaceBLE Smart App’s OnlyFully programmable (Onboard stack)-92 dBm typical9 dBm ± 2dBTX 25mA, RX 23mAMax 2 dBi1.8-3.6 VBATT and 1.2-3.6 VDD PAD9g approx-30°C to 85°C-40°C to +85°C22mm x 10mm x 2.8mmLM930Page 2 of 4 +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.comTECHNOLOGIES
LM930 Bluetooth BLE 4.1 Smart ModuleUART Class 1 with UFL Receptical Part NoProduct930-0633LM930LM930Page 3 of 4 +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.comPin Assignments Pin12345678910111213141516171819202122232425262728NameGNDGNDGNDAIO2AIO1AIO0GNDIO0IO1IO3IO4IO5GNDGNDGNDPADSVBATTIO6IO7IO8GNDIO9IO10IO11SPIPIONWAKEGNDGNDTypeGroundGroundGroundI/OI/OI/OGroundI/OI/OI/OI/OI/OGroundGroundGroundPowerPowerI/OI/OI/OGroundI/OI/OI/OInputInputGroundGroundDescriptionCommon GroundCommon GroundCommon GroundProgrammable Input OutputProgrammable Input OutputProgrammable Input OutputCommon GroundUART TXUART RXProgrammable Input OutputProgrammable Input OutputDEBUG_CLKCommon GroundCommon GroundCommon GroundPositive supply for all digital I/O PortsModule input supply, 3.3V DCDEBUG_CS#DEBUG_MOSIDEBUG_MISOCommon GroundProgrammable Input OutputProgrammable Input OutputProgrammable Input OutputHigh to enable the SPI debug interfaceWake from HibernateCommon GroundCommon GroundTECHNOLOGIES
LM930 Bluetooth BLE 4.1 Smart ModuleUART Class 1 with UFL Receptical Part NoProduct930-0633LM930LM930Page 4 of 4 +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.comTECHNOLOGIESPin Outs 10.11mm1.27mm0.80mm1.08mm0.8 x 0.8mm22mm12345678910111213242526272322212019181716151428
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. Note 1: This module certified that complies with RF exposure requirement under mobile or fixed condition, this module is to be installed only in mobile or fixed applications. A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. A fixed device is defined as a device is physically secured at one location and is not able to be easily moved to another location. Note 2: Any modifications made to the module will void the Grant of Certification, this module is limited to OEM installation only and must not be sold to end-users, end-user has no manual instructions to remove or install the device, only software or operating procedure shall be placed in the end-user operating manual of final products. Note 3: The device must not transmit simultaneously with any other antenna or transmitter. Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. For example, if a host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may depend on the details of how the module is integrated with the host, LM Technologies Ltd. shall provide guidance to the host manufacturer for compliance with the Part 15B requirements. Note 5: FCC ID label on the final system must be labeled with “Contains FCC ID: VVX-LM930-XXXX” or “Contains transmitter module FCC ID: VVX-LM930-XXXX”. The transmitter module must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the host product. LM Technologies Ltd. is responsible for the compliance of the module in all final hosts.
IC WARNING This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This radio transmitter (IC: 10531A-LM930XXXX) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. No. Antenna Type Gain Impedance 1 External uniqueness Antenna 2dBi 50ohm
IC Radiation Exposure Statement: This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change. Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. This module is limited to OEM installation only and must not be sold to end-users, end-user has no manual instructions to remove or install the device, only software or operating procedure shall be placed in the end-user operating manual of final products. Additional testing and certification may be necessary when multiple modules are used. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. The final end product must be labeled in a visible area with the following " Contains IC: 10531A-LM930XXXX".

Navigation menu