LM Technologies LM930-XXXX Bluetooth Smart Module 4.1 - LM930 User Manual LM930 DATASHEET
LM Technologies Ltd. Bluetooth Smart Module 4.1 - LM930 LM930 DATASHEET
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3114864 |
| Application ID | J+zL52lx6WRxq4n4u89nMA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 187.31kB (2341362 bits) |
| Date Submitted | 2016-08-29 00:00:00 |
| Date Available | 2016-08-29 00:00:00 |
| Creation Date | 2016-05-04 11:21:47 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2016-07-14 17:33:20 |
| Document Title | LM930_DATASHEET |
| Document Creator | Adobe Illustrator CC 2015 (Macintosh) |
TECHNOLOGIES LM930 Bluetooth BLE 4.1 Smart Module UART Class 1 with UFL Receptical Product LM930 Part No 930-0633 Revised 04/MAY/2016 10 mm 2.8mm 22m NB: Antenna variant suject to change without notice. Features 128KB memory: 64KB RAM and 64KB ROM 12 digital PIOs Bluetooth ® v4.1 specification 3 analogue AIOs 9dBm Bluetooth low energy maximum transmit output power UART Support for Bluetooth v4.1 specification host stack including ATT, GATT, SMP, L2CAP, GAP 4 PWM modules RSSI monitoring for proximity applications 10-bit ADC <900nA current consumption in dormant mode Low Power 32kHz and 16MHz crystal Switch-mode power supply Programmable general purpose PIO controller Wake-up interrupt and watchdog timer Overview The LM930 is a highly power efficient stand alone module, combining both the host micro controller and Bluetooth radio into a single package. You can connect your peripheral sensors and devices directly to the LM930 and use it to host your application code, thus eliminating the need for an extra MCU. Furthermore LM offer a range of available Bluetooth Smart profile templates which we can customise to your specification and can offer applications such as iBeacon to be pre-installed. For production, LM can provide modules with your firmware and settings preloaded, simplifying your manufacturing and testing process. The LM930 comes with a U.FL/IPEX connector for attaching an antenna. With a battery added to the LM930 and placed into a housing, this module can also act as an iBeacon device awaiting instruction/ data, or to pass on instruction/data automatically when in range of other BLE enabled devices. LM has been creating long distance Bluetooth Modules and Adapters for over 10 years, with our experience we have developed a new Long Range BLE Module, utilising an antenna with superior performance comparable to common IC or meander alternatives, ideally suited for distances up to 500m and beyond. LM930 Page 1 of 4 +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.com TECHNOLOGIES LM930 Bluetooth BLE 4.1 Smart Module UART Class 1 with UFL Receptical Packaging Product LM930 Part No 930-0633 Application Templates Included 930-0633 M SMT PROG BT4.1 300Kbps UART SPI I2C 1.2-4.4V 9.3dB UFL TRAY 930-0635 MOD SMT PROG BT4.1 300Kbps UART SPI I2C 1.2-4.4V 9 T&R Alert Tag Automotive Keyfob Beacon Blood Pressure Sensor Cycling Speed and Cadence Sensor Environment Sensor Glucose Sensor Health Thermometer Hearth Rate Sensor Keyboard Multifunction Steering Wheel Mouse Running Speed and Cadence Sensor Security Tag Serial Communication Time Client Temperature and Pressure Weight Scale General Specification Chipset CSR 1012 Class BLE Smart Class 1 Speed / Bandwidth Up to 1Mbps (0.27Mbps throughput) Range 0m - 500m estimated with 2Dbi Antenna Interface UART ( I²C + SPI for peripherals ) Standard Bluetooth 4.1 Frequency 2.400 to 2.4835 GHz Hopping Adaptive/sec 2MHz channel space Profiles Supported BLE Smart App’s Only Firmware Fully programmable (Onboard stack) Rx Sensitivity -92 dBm typical Tx Output Power 9 dBm ± 2dB Current Consumption TX 25mA, RX 23mA Antenna Gain Max 2 dBi Power Supply 1.8-3.6 VBATT and 1.2-3.6 VDD PAD Weight 9g approx Operating Temperature -30°C to 85°C Storage Temperature -40°C to +85°C Dimensions 22mm x 10mm x 2.8mm LM930 Page 2 of 4 +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.com TECHNOLOGIES LM930 Bluetooth BLE 4.1 Smart Module UART Class 1 with UFL Receptical Product LM930 Part No 930-0633 Pin Assignments Pin Name Type Description GND Ground Common Ground GND Ground Common Ground GND Ground Common Ground AIO2 I/O Programmable Input Output AIO1 I/O Programmable Input Output AIO0 I/O Programmable Input Output GND Ground Common Ground IO0 I/O UART TX IO1 I/O UART RX 10 IO3 I/O Programmable Input Output 11 IO4 I/O Programmable Input Output 12 IO5 I/O DEBUG_CLK 13 GND Ground Common Ground 14 GND Ground Common Ground 15 GND Ground Common Ground 16 PADS Power Positive supply for all digital I/O Ports 17 VBATT Power Module input supply, 3.3V DC 18 IO6 I/O DEBUG_CS# 19 IO7 I/O DEBUG_MOSI 20 IO8 I/O DEBUG_MISO 21 GND Ground Common Ground 22 IO9 I/O Programmable Input Output 23 IO10 I/O Programmable Input Output 24 IO11 I/O Programmable Input Output 25 SPIPION Input High to enable the SPI debug interface 26 WAKE Input Wake from Hibernate 27 GND Ground Common Ground 28 GND Ground Common Ground LM930 Page 3 of 4 +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.com TECHNOLOGIES LM930 Bluetooth BLE 4.1 Smart Module UART Class 1 with UFL Receptical Product LM930 Part No 930-0633 Pin Outs 10.11mm 28 1.27mm 27 26 25 24 23 22 21 20 19 10 18 11 17 12 14 13 LM930 22mm 16 15 0.8 x 0.8mm Page 4 of 4 0.80mm 1.08mm +44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.com FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. Note 1: This module certified that complies with RF exposure requirement under mobile or fixed condition, this module is to be installed only in mobile or fixed applications. A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. A fixed device is defined as a device is physically secured at one location and is not able to be easily moved to another location. Note 2: Any modifications made to the module will void the Grant of Certification, this module is limited to OEM installation only and must not be sold to end-users, end-user has no manual instructions to remove or install the device, only software or operating procedure shall be placed in the end-user operating manual of final products. Note 3: The device must not transmit simultaneously with any other antenna or transmitter. Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. For example, if a host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may depend on the details of how the module is integrated with the host, LM Technologies Ltd. shall provide guidance to the host manufacturer for compliance with the Part 15B requirements. Note 5: FCC ID label on the final system must be labeled with “Contains FCC ID: VVX-LM930-XXXX” or “Contains transmitter module FCC ID: VVX-LM930-XXXX”. The transmitter module must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the host product. LM Technologies Ltd. is responsible for the compliance of the module in all final hosts. IC WARNING This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This radio transmitter (IC: 10531A-LM930XXXX) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. No. Antenna Type External uniqueness Antenna Gain 2dBi Impedance 50ohm IC Radiation Exposure Statement: This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change. Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. This module is limited to OEM installation only and must not be sold to end-users, end-user has no manual instructions to remove or install the device, only software or operating procedure shall be placed in the end-user operating manual of final products. Additional testing and certification may be necessary when multiple modules are used. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. The final end product must be labeled in a visible area with the following " Contains IC: 10531A-LM930XXXX".
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Create Date : 2016:05:04 11:21:47+01:00 Creator : Adobe Illustrator CC 2015 (Macintosh) Modify Date : 2016:07:14 17:33:20+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : LM930_DATASHEET Metadata Date : 2016:07:14 17:33:20+08:00 Creator Tool : Adobe Illustrator CC 2015 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 84 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10071 bytes, use -b option to extract) Instance ID : uuid:ea380f32-050a-4d1a-9fb2-6834deccc3fe Document ID : xmp.did:9b4859a7-6010-49dd-a6c2-a7b4564f0937 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:2be79b50-c67c-8d4a-9162-a289bb561012 Derived From Document ID : xmp.did:0180117407206811822ACAC706042BD2 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:F77F117407206811818C85DF6A1A75C3, xmp.iid:B708B09F8A9DE011A22C8CE78DEA3353, xmp.iid:9b4859a7-6010-49dd-a6c2-a7b4564f0937 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:27 14:40:42-07:00, 2011:06:23 12:19:13+01:00, 2016:05:04 11:21:41+01:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CC 2015 (Macintosh) History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Manifest Link Form : EmbedByReference Manifest Reference File Path : /Users/LM8/Google Drive/Web & Media/Products/LM930-jun2015.png Manifest Reference Document ID : xmp.did:919505FE0B9A11E5AFBED3A069891972 Manifest Reference Instance ID : xmp.iid:919505FD0B9A11E5AFBED3A069891972 Ingredients File Path : /Users/LM8/Google Drive/Web & Media/Products/LM930-jun2015.png Ingredients Document ID : xmp.did:919505FE0B9A11E5AFBED3A069891972 Ingredients Instance ID : xmp.iid:919505FD0B9A11E5AFBED3A069891972 Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 210.001656 Max Page Size H : 297.000111 Max Page Size Unit : Millimeters Font Name : Calibri, GillSansMT-Bold, Helvetica-Light, HelveticaNeue-Light, HelveticaNeue, HelveticaNeue-Medium, Helvetica75-Bold Font Family : Calibri, Gill Sans MT, Helvetica, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica75 Font Face : Regular, Bold, Light, Light, Regular, Medium, Bold Font Type : Open Type, Open Type, TrueType, TrueType, TrueType, TrueType, TrueType Font Version : Version 5.62, Version 1.65, 10.0d4e1, 10.0d40e1, 10.0d40e1, 10.0d40e1, Version 1.00 Font Composite : False, False, False, False, False, False, False Font File Name : Calibri.ttf, Gill Sans MT Bold.ttf, Helvetica.dfont, HelveticaNeue.dfont, HelveticaNeue.dfont, HelveticaNeue.dfont, HelveticaBd___-.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 286 CVU Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE 286 CVU Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 100.000000 Swatch Groups Colorants Magenta : 60.000002 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 6.000000 Producer : Adobe PDF library 15.00 Page Count : 8EXIF Metadata provided by EXIF.tools