LOFTYNN INTELLIGENCE 600T Baby Monitor User Manual E600 Instruction Manual 20April2017

Download:
Mirror Download [FCC.gov]
Document ID	3389788
Application ID	mRL2XR71k0RFfAFff5prLg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	141.66kB (1770769 bits)
Date Submitted	2017-05-14 00:00:00
Date Available	2017-05-14 00:00:00
Creation Date	2017-04-20 18:14:35
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-05-12 14:35:42
Document Title	E600 Instruction Manual(20April2017)
Document Creator	Adobe Illustrator CS6 (Windows)

Model-E600
INSTRUCTION MANUAL
AXVUE E600 VIDEO BABY MONITOR
WITH 2.4" LCD SCREEN AND NIGHT VISION
Please read the following instructions and warnings carefully
Tools required for wall mount: Screwdriver and drill (not included)
Keep this instruction manual for future reference.
For technical support see FAQ page.
For adult use only.
Get to know us at: www.axvue.com
WARNING
WARNING
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
-Strangulation Hazard - Children have STRANGLED in cords. Keep this cord out
of reach of children (more than 3 feet (0.9m) away from the crib). Use
enclosed Security Clips to help secure cord away from baby’s reach. Never use
extension cords with AC Adapters. Only use the AC Adapter provided.
-When an Adapter is plugged into an electrical outlet, do not touch the exposed
end.
-Test monitor before first use, periodically, and when changing location of the
Camera.
-Do not use monitor near water (such as bathtub, sink, etc.).
-Keep monitor away from heat sources (such as stoves, radiators, etc).
Make sure there is proper ventilation around all monitor components. Do not
place on sofas, cushions, beds, etc. which may block ventilation.
-This product is not a toy. Do not allow children to play with it. This product
contains small parts. Adult assembly required. Exercise care when unpacking
and assembling the product.
BATTERY WARNING
-Use only the original rechargeable battery provided. Please contact Axvue Inc.
for replacement battery. Contact information can be found on last page of these
instructions.
-Clean battery and product contacts prior to battery installation.
-Do not short-circuit supply terminals.
-Remove battery when product is stored for long periods of time or when battery
is exhausted.
-Keep all batteries away from children.
-Dispose of exhausted battery properly.
WARNING:
STRANGULATION HAZARD - Children have STRANGLED in cords. Keep this cord
out of reach of children (more than 3 feet (0.9 m) away from the crib). Use
enclosed Security Clips to help secure cord away from baby’s reach. Never use
extension cords with AC Adapters. Only use the AC Adapters provided.
PAGE 1
Features and components
1 LED*
2 Up / Volume Up
3 Power / Video
4 Left/Temperature mode
5 OK / menu
11 Kickstand
12 DC Jack
Adapter for monitor:
*LED
Power & Low Battery
6 Right/Zoom In
7 Talk Back
8 Down / Volume Down
9 Speaker
10 Battery Compartment
Sound Lights
PAGE 2
Features and components (continued)
13 Nighttime LEDs
14 Lens
15 Microphone
16 Speaker
17 Power On / Off Switch
18 Temperature sensor
19 DC Jack
x6
x1
Adapter for camera:
x1
WARNING
STRANGULATION HAZARD - Children have STRANGLED in cords.
Keep this cord out of reach of children (more than 3 feet (0.9 m)
away from the crib). Use enclosed Security Clips to help secure
cord away from baby’s reach. Never use extension cords with AC
Adapters. Only use the AC Adapters provided.
PAGE 3
Features and components
WARNING
STRANGULATION HAZARD - Children have STRANGLED in cord out of reach of children, (more than
3 feet away from the crib). Use enclosed Security Clips to help secure cord away from baby’s reach.
Never use extension cords with Adapters. Only use the Adapters provided.
TESTING INITIAL SETUP
Before using the monitor, charge the battery for 6-8 hours.
Step1: To test reception, determine a location for the
camera that will provide the best view of your baby in
the crib (note: do not mount camera in permanent
location until initial set up test completed). Plug
Adapter into wall outlet and turn camera power on.
Step2: Press and hold ‘POWER/MENU’ button on
monitor for 5-seconds until the AXVUE showed on the
screen.Video should immediately appear on screen.
If video does not appear, go to page 5 ‘To pair
monitor and camera’. If video appears, the initial set
up test is complete,and you can install camera,
instructions below.
Installation Camera: Place the camera on a flat
surface, such as a bureau or shelf (Figure1) or mount
the camera on a wall (Figure 2). For example: On the
desk or cabinet or fixed to the wall, make sure that at
least 3 feet from the crib, power lines should be
placed above or behind the camera, adjust the
camera angle, until the display see the entire crib, or
do you think the best line of sight.
Figure 1
1m
1m
Fixing cable
with clip
Figure 2
WALL-MOUNT
1. Pre-drill a hole in the wall, a 3/16” (4.8mm) drill bit.
2. Insert the wall anchor into the hole and with a hammer, tap gently on the end until the wall
anchor is flush with the wall.
3. Tighten screw until only 1/4” (6.2mm) of the screw is exposed.
4. Insert camera Adapter into the camera’s adapter jack.
5. Slide the back of the camera down onto the screw until the camera is secure to the wall.
6. Plug the Adapter into a standard electrical outlet.
7. Secure the cord to the wall using the security clips to keep cord away from baby’s reach.
PAGE 4
Setup & use (continued)
TO USE PLUGGED-IN
Step 1: Place the monitors in the rooms from which you want to monitor your baby (ie., living room
or bedroom). Plug the monitor AC adapters into the AC adapter jacks and other ends into
standard electrical outlets.
Step 2: Press and hold POWER/MENU button for 5-seconds to power up until the AXVUE logo or
video appears on screen.
Step 3: For audio and no video, press the VIDEO ON/OFF button top of the unit.
Step 4: To turn the monitor off completely, press and hold the POWER/MENU button for 5-seconds.
TO USE PORTABLE / BATTERY MODE
Before using the monitor, charge the battery for 6-8 hours.
Step 1: Charge the battery for 4 hours at least, before using the monitor in portable mode.
Step 2: Make sure the monitor adapter is plugged into the monitor, camera adapter is plugged into
the camera, as they are shown on the body.
Step 3: The battery life can be up to 6-hours if charged overnight.
Battery life will be weaken if recharging constantly. Charge the battery after the indicator is shown.
Remove battery if long time of non-use, or exhausted.
TO PAIR MONITOR AND CAMERA ( ADD A CAMERA )
The monitor and the camera are paired prior to the shipment. If the monitor
and camera are found not paired for some reason, follow steps below:
Step 1: Make sure the monitor is at the same area as the camera.
Step 2: Keep the camera powered off.
OFF
Step 3: Press Power/VIDEO button for 5 second to power on the monitor. Then press
OK/Menu button
, highlight camera option
by using Left/Temperature mode
or
Right/Zoom In
button, press the OK/menu button to enter the camera options menu
which is show as below . Select ADD CAM icon , press OK/menu button to camera list, select
an availabe number and press OK/menu button to start pairing, the red LED will flash and
wireless connecting icon is shown.
Red LED will flash
Press 5 second
to power on.
Step 4: Power on the camera within 8 seconds.
ON
Step 5: Wait 3 seconds, the red LED will stop flashing once paired successfully, and video will appear.
PAGE 5
Setup & use (continued)
TO DELETE A CAMERA
Camera Deleted
TO SELECT A CAMERA
Selected camera will
appear on the screen
TO SCAN ALL CAMERAS (AUTO-SCAN)
This product accepts up to 4 cameras and operates on audio and video auto-scan to
view each camera on an 8-second rotation.
All cameras can be auto-scanned
to view on an 8-second rotation.
The SCAN, DELETE, ADD, VIEW CAMERA menu options are used with addtional cameras
only. Order the extra camera by visiting us at http://www.axvue.com .
Favorite features (continued)
DIGITAL ZOOM
The zoom option enables you to get a closer view on screen. Press the ZOOM IN/OUT button once
will move the image on the monitor screen to 2x view, press again to return the normal view.
TWO WAY COMMUNICATION
Your baby is alway eager to your voice when crying. Press and hold the TALK BACK button on the
monitor to activate two-way communication.
NIGHT VISION
The LEDs around the len, is functioning to the night vision, which will be enabled automatically. It is
appearing black and white image on the screen, when the camera is in a low-light and dark room.
SOUND LIGHTS
The 5 sound activated LED lights illuminate based on the level of baby’s sounds. If baby is just
cooing, green to amber lights will illuminate and if baby is crying, amber to red lights will illuminate.
This feature is particularly helpful for parents if they are in crowded or noisy rooms.
PAGE 6
Favorite features (continued)
ADJUSTABLE VOLUME AND BRIGHTNESS
Volume adjustments allow higher volume settings for parents who want to hear every little sound
from baby, like cooing, and lower volume settings to monitor louder sounds and cries from baby.
Easily adjust the volume based on your preferences and the level of other sounds in the home.
Brightness can be adjusted, as well, to accommodate the level of light in the room. Using the
brightness control feature enables lighter or darker video, depending on room viewing conditions.
Use the UP and DOWN arrows to adjust the brightness.
POWER-SAVE MODE
While operating on battery power, the video screen will go to sleep, to conserve battery power.
Audio and sound lights continue to function normally. Video sleep mode is not available when
using AC adapter.
VIDEO ON-OFF BUTTON
This button turns the video mode on from video sleep mode. It is ideal for a quick view of baby in
the middle of the night. To monitor in audio only mode, simply press the VIDEO ON/OFF again to
turn the video screen off.
FAQ
NO PICTURE OR SOUND
-Make sure the camera and handheld monitor unit are paired (see page 5 )
-Make sure the camera and handheld monitor unit are both turned on
-Make sure the AC adapters are plugged in
-Make sure the outlets are working
-Make sure the battery is charged before working as portable mode
-Keep the camera and monitor out of WiFi router (more than 10 feet ) off.
SOUND BUT NO PICTURE
-Press the VIDEO ON/OFF button once to turn on video mode
-Check to make sure nothing is blocking the camera
-Test reception by moving the monitor and/or camera to different locations
-Pair the camera and monitor again
PICTURE BUT NO SOUND
-Power the monitor completely off, remove and re-insert the battery, then turn monitor back on.
-Turn up the volume using Volume Control
-Make sure the camera and handheld monitor unit are paired.
PICTURE NOT CLEAR
-Position the monitor closer to the camera, but not adjacent.
-Move the monitor away from other electronic devices, WiFi router, etc.
-Adjust the brightness using Brightness Control
-Test reception by moving the monitor and/or camera to different locations
SQUEALING SOUND COMING FROM SPEAKER ON MONITOR
-Move the monitor and camera further away from each other
-Turn the volume down using Volume Control
-Power the monitor completely off, remove and re-insert the battery, then turn the monitor on again.
PAGE 7
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
IMPORTANT SAFETY INSTRUCTIONS
-Read safety and operating instructions before the product is operated.
-Retain instructions for future reference.
-Heed warnings on the product and in the operating instructions.
-Follow instructions and operate properly.
-Cleaning after unplugging this product from the wall outlet. And use a damp cloth for cleaning.
-Use product manufacturer recommended attachments to avoid possible hazards.
-Do not use this product near humid place, for example, bath tub, wash bowl, kitchen sink, laundry
tub, wet basement, swimming pool and the like.
-Ensure this product is installed securely on a stable cart, stand, tripod, bracket, or table. -Otherwise,
The falling product may cause serious injury to a child or adult, and serious damage to -the product.
- Use manufacture recommended cart, stand, tripod, bracket, or table. Follow the manufacturer's
instructions strictly and use recommended mounting kits to mount the product.
-The slots and openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and keep these openings not blocked or covered.
-The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar
surfaces. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
-This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer
to the operating instructions.
-Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
-An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
PAGE 8
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
IMPORTANT SAFETY INSTRUCTIONS
-Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
-Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
-Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
*When the power-supply cord or plug is damaged.
*If liquid has been spilled, or objects have fallen into the product.
*If the product has been exposed to rain or water.
*If the product does not operate normally by following the operating instructions. Adjusting only
those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
*If the product has been dropped or damaged in any way, or when the product exhibits a distinct
change in performance - this indicated a need for service.
-Replacement Parts - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
-Safety Check - Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks to determine that the product is in proper operating condition.
-The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
-The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
Get to know us at: www.axvue.com
PAGE 9
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION
1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20
cm must be maintained between the antenna of this device and all persons.
2. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Get to know us at: www.axvue.com
Colors and styles may vary.
Please retain information for future reference.
PAGE 10
AXVUE stands behind all of its products.
If you are not completely satisfied or have any
questions,
please contact us at http://www.axvue.com
MADE IN CHINA
connect with us:
AXVUE INC.
19 W 34TH STREET SUITE 1018
NEW YORK, NY 10001
All rights Reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : E600 Instruction Manual(20April2017)
Metadata Date                   : 2017:05:12 14:35:42+08:00
Modify Date                     : 2017:05:12 14:35:42+08:00
Create Date                     : 2017:04:20 18:14:35+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 52
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 4451 bytes, use -b option to extract)
Instance ID                     : uuid:d80aeecf-4c8b-450c-879c-38433e1aac0f
Document ID                     : xmp.did:A2AC7C67A325E7119C4983720568FC0A
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:01b6c5a5-ac86-448f-bdad-09bbfd3928ed
Derived From Document ID        : xmp.did:9EAC7C67A325E7119C4983720568FC0A
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:00A381E33B6BE6119CF3976A78393032, xmp.iid:A2AC7C67A325E7119C4983720568FC0A
History When                    : 2016:08:26 11:19:24+08:00, 2017:04:20 18:14:22+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 140.000412
Max Page Size H                 : 200.000195
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, ArialNarrow, Calibri-Bold, Calibri, Calibri-BoldItalic, MicrosoftYaHei, MicrosoftYaHei-Bold
Font Family                     : Arial, Arial, Arial, Calibri, Calibri, Calibri, 微软雅黑, 微软雅黑
Font Face                       : Regular, Bold, Narrow, Bold, Regular, Bold Italic, Regular, Bold
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType
Font Version                    : Version 5.06, Version 5.06, Version 2.40, Version 5.62, Version 5.62, Version 5.62, Version 6.22, Version 6.21
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : arial_0.ttf, arialbd_0.ttf, ARIALN_0.TTF, calibrib_0.ttf, calibri_0.ttf, calibriz_0.ttf, msyh.ttc, msyhbd.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Creator Version                 : 21.0.2
Page Count                      : 12
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools