LYD TECHNOLOGY CM802 2.4GHz Wireless Camera User Manual RC431 CM802

Download:
Mirror Download [FCC.gov]
Document ID	1435616
Application ID	k2X/kZF8wUbyRDRS690/Mg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.57kB (732075 bits)
Date Submitted	2011-03-22 00:00:00
Date Available	2011-03-22 00:00:00
Creation Date	2011-03-14 17:22:38
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-03-15 17:21:33
Document Title	Microsoft Word - RC431 CM802.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

RC431 USB Wireless Receiver User Manual
Thank you for using our wireless USB receiver, please read the following content carefully before using, it will help
you make better use of this product.
Introduction
RC431 wireless USB receiver works in ISM Band: 2400 ~ 2483MHz to receive wireless camera audio and video
signals and displays the received image signal via PC. With our “LYD Monitoring System” software, you can
capture the image and video you are watching, and play back the data recorded. It can also be used as a regular
receiver to convert the Video & Audio signals to normal monitor/TV. A simple switch from TV to AV on your
television enables you to enjoy its capability for entertainment, monitoring and security purposes.
Basic Specification
Support Windows XP & VISTA
Support USB2.0
Video and Audio
Support remote monitoring and controlling by third-party software via PC, support Internet video
telephone
ISM Frequency Band:2400～2483MHz
Receiving Frequency:CH1=2414MHz,CH2=2432MHz, CH3=2450MHz,CH4=2468MHz
Receiving Sensitivity: -85 dbm
IF frequency: 480MHz
Video Output amplitude:1Vp-p
Audio Output amplitude: 2.5Vp-p(Max)
High-speed image compression processing, display speed:30fp/s
Resolution: 640*480; 320*240
Power Supply: PC Mode: USB power, no power adapter; Monitor / TV Model: DC5V/500mA
Dimension: 120x99x30mm
Operating temperature: -10～50℃
Diagram：
Antenna
Channel button (ON/ OFF)
Channel Indicator
Audio
Video
USB Port
Installation
Monitor / TV mode：
1.
Connect the wireless cameras with the configured power adaptor and power on.
2.
If two or more wireless cameras are installed at the same time, please keep a distance of 2 meters or more
between the two wireless cameras, as well as between cameras and receiver too. Otherwise there might
be signal interference between them so that will influence the image quality.
3.
Turn the antenna of RC431 and make the antenna vertical upward in order to ensure the best reception.
4.
Connect one end of the AV cable to the RC431's AUDIO and VIDEO output jack ,and the other side to the
monitor / TV AUDIO and VIDEO input jack.
5.
Insert the AC input plug of the power adapter (DC5V/500mA) into electricity socket, insert DC output plug
into RC431 USB socket. Turn on the main power, and then you will see the red mark on the receiver.
6.
Turn on the monitor / TV power supply, change the monitor / TV to AV mode.
7.
RC431 button operation:
1). Power on: In the off state, one press on the button enables the receiver power on and the channel indicator
LED turns on.
2). Switching channels: In the operation state, one press on the button enables to receiver jump into next
channel.
3). Power off: In the operation state, press the button and keep more than 1 second. Release the button when
the LED indicator turns off.
8.
Adjust the camera lens if the image is not clear.
9.
Adjust TV brightness, contrast, and color of the monitor to obtain the best quality images.
Speed DVR user manual
Welcome to use Speed Soft Speed DVR ™. This video surveillance software is designed to meet your demands for
security and surveillance purposes. Speed DVR provides security and protection for workplace, house, baby room,
car, garage and so on. Speed DVR enables your computer to become a powerful monitoring system. Speed DVR
supports remote monitoring in real-time and Multi-cameras displaying. Speed DVR enables to capture camera
movements and save multi-media file formats in computer. Search and manage the recorded data easily.
Speed DVR function
Speed DVR software Key features.
• Motion detection
• ASF code
• Remote Capture video content
• Intelligent archiving video surveillance
• Multi-Camera View
• cameras
• Quick search
• Recorded data and files management
• Strong reliability
Interface Basics
This section describes the various interfaces of the Speed DVR briefly.
Speed DVR Main window
Speed DVR user interface contains Control panel part, Video display area part and Right-click menu part, Speed
DVR enables you to manage recorded data and any content easily.
Use Speed DVR Control Panel, you can easily access to all common functions program.
The following table describes all the features of Speed DVR control panel:
ICON
Function
Description
Exit
Exit Speed DVR.
Record
Using the current camera to start recording
Play/Pause
Play or pause when recording.
STOP
STOP playing
Snapshot
Capture the video picture
Zoom
and
Panorama
Enlarge or minimize the image viewing area.
Alarm
Enable or disable the alarm
Settings
Display Settings dialog
Be on the screen with instant access to information
Help
about how to use Speed DVR detailed information
and instructions
Shows the status of the process of recording, such as
Display area
the camera input source and recording time
Volume Control
volume. Click the speaker icon to mute
Displays the current playback status. Drag the slider,
Slipper block
Backward
Drag the slider to increase or decrease playback
the video moves to a specific location
and
forward
Camera
Forward or backward Video
Select a camera button, and watch or record the
image
Multi-Camera
Support converting to single-or multi-camera display
Mode
window
Open the file
Open the recorded files, and play.
Right -Click Menu
Speed DVR Right -Click Menu include following items：
Play：Start playing
Pause: Pause playback of recorded files
Stop: Stop playing
Recording：start or stop recording
Camera：Select a camera to play
Play files：Play recorded files
Capture picture：Capture video picture
Full screen：Playing video in full screen
Multi-frame：display 4 pictures in one screen
Alarm：Start or cancel alarm function
Front-end display：Window displays at the top of all windows
Scheduled Tasks: Scheduled Tasks dialog is open
Settings：Open the Settings dialog
Registration: Software Registration
Check for updates: networking check for new versions
Help：Show Help Document
Regarding: the software version information and instruction
Exit：Exit Speed DVR
Introduction
Before using Speed DVR, please read the following sections to help you use the program better.
Installation requirements
System Requirements
Basic System Requirements
The recommended system requirements
Processor
Intel® Pentium® III 800 MHz
Intel® Pentium® 4 1.8 GHz
Memory
64 MB RAM
256 MB RAM
Video Card
800 x 600，16 Bit color
800 x 600，24/32 Bit color
USB port
Operation system
USB 2.0
Windows 2000（including SP4 or higher）, Windows XP（including SP2） ,Windows
Vista
Audio card
Windows Compatible with sound card
Available hard disk
space
DirectX support
50 MB
DirectX 9
Unloading Speed DVR
1.
In the Windows taskbar, click Start, and then click Control Panel. Display "Control Panel" window
2.
Double-click Add or Remove Programs icon. Display the "Add or Remove Programs" dialog box
3.
Select Speed DVR items，Click Add or Remove, Display the "Add or Remove Programs" dialog box.
4.
Click OK
5.
According to all the instructions displayed on the screen, unloading the Speed DVR from your
computer successfully.
Speed DVR HELP part
Please refer to the software Speed DVR help. Help in the menu bar, click "Help, or click the Help button, or start
the online help.
Connect to device
Before start Speed DVR, you must connect the camera to the computer. Please refer to "Connect USB camera"
section for more information about how to connect USB camera and computer.
Connect USB camera
1.
Install the software of the camera.
2.
Re-start your computer.
3.
Connect camera to the computer's USB port. Windows Hardware Wizard will install the camera
driver on your computer. If the Hardware Wizard failed to find the driver, please refer to the document of
the camera for more information about installing the driver details.
4.
Run Speed DVR.
5.
In the menu bar, select  and then select a camera number, Speed DVR will display the video
on the window of CAMERA.
Notes： Combine Speed DVR with wireless CMOS camera is available. For more information about how to
connect a wireless CMOS camera, please refer to the document of came with wireless devices
How to use Speed DVR
Use Speed DVR custom to recording or alarming, viewing the recorded data, capture images, viewing images in a
single model or a multi mode. The following sections describe the general function of Speed DVR
Images Viewing
Speed DVR enables to view images in a single model or a multi mode
How to view a single camera image：
On the menu bar, select "View" and then select a camera
How to view multiple camera images
On the menu bar, select "View" and then select the "multi-camera" or click the "multi-camera" mode
button.
Video recording
Use the Speed DVR to record the full motion video from the camera and audio, and use the MPEG-4 encoding for
saving the real time video content directly to a designated area on the hard disk.
To record a video clip:
1.
Click 
camera.
2.
Click 
button. Speed DVR start recording the video from the current working
button to stop reording.
View Event History
Speed DVR supports viewing, monitoring and analyzing events occurred when recording. Support view events in a
particular category, such as all videos, notice, warning, information or errors. Support review all event history by
date, by custom task testing activities (E.g., by time, alarm, motion recording video, or view the event). Supports
enter search criteria, such as start date, end date, and time range.
To view the event history:
To select "Settings" and then select "History." on the menu bar, you can see A "History" dialog box.
Recorded video when Alarm or motion is detected
Speed DVR activates the camera to start recording when alarm alert or motion detected.
To record video when motion is detected or in the event of alarm
1.
Select "alert" and then choose "Alert Settings." in the menu bar, you can see An "Alert Settings"
window.
2.
Select camera.
3.
See Configure Alert Settings.
Capture still Video image
Speed DVR Live also support you to capture a single image recording process
Click
button of the control panel，The capture image will be saved in an appointed file. For more user
guide information, please refer to Recording Properties page. The captured file will be named automatically.
View Archive Video
To view archive video in Speed DVR ：
1.
Click 
2.
Select a programmed name from Video list, then Click
Button enter into a “Recording” page
Button.
How to configure Speed DVR settings
Please read the following content carefully to know how to setting Speed DVR.
Visit Speed DVR setting page
Please carry out of the following step：
• Click
button.
• Select and click “setting” button in the right-click menu, a “setting” Dialog box will be open.
The display properties Configuration
"Display" property page enable you to configure the video mode
Of Speed DVR on the monitor or the screen
1.
Please try one the following：
o Click
button.
o Select “setting” in the menu and then select “Options”
You can see A Dialog box as follows:
2.
In the "alias" field, enter the name of the camera connected to the computer.
3.
In the OSD box, select "time" in order to displays the current time when enable the OSD function of
the Speed DVR
4.
Select "always on top" check box in order to make sure the speed DVR window is always displayed
when you run the other programs
5.
Select "Open OSD" check box for displaying camera information, such as camera number, date and
time in the "camera" window
6.
Drag the slider to adjust the brightness, hue, contrast, grayscale of video image, when you click the
"Default" button, brightness, hue, contrast, grayscale settings will reset to its original position.
7.
Click “OK” button.
Device properties Configuration
In the "Device" property page for the cameras and audio equipment, select the appropriate parameters
1.
Please do one of the following：
o In the "Settings" dialog box, select "Device" tab.
o In the context menu, select "Settings" "" Device "tab
And find an "equipment" Properties dialog box as follows:
2.
In the "Video input device" drop-down menu, select the camera you want to use as surveillance
cameras.
3.
In the "video input format" drop-down menu, select the video standard format
4.
In the "video input source" drop-down menu, select "S-Video" or "composite" option. VCR, external
DVD players and other playback devices need using "S-Video" or "complex."
5.
In the "Audio Input Device" drop-down menu, select Audio Devices
6.
In the "Audio Input Source" drop-down menu, select the audio input source equipment
7.
Click “OK”
Configuration recording properties
Speed DVR also support MPEG-4 recording format，Different specific Configuration and recording quality optional
1.
Please do one of the following：
o In the "Settings" dialog box, select "Recording" option
o In the context menu, select "Settings" "" Recording "tab.
You can find a “record" Properties dialog box.
2.
By selecting a preset level ( "good", "better" or "best") to select the output quality of recorded
programs. Quality levels associated with each recording settings appears on the right
3.
Choose a good output folder for recording file
4.
To Set up automatic split the file size by selecting the tab when file is more than the fixed size ,The
camera stop recording automatically", then when recording file exceeds the size of the file split
automatically, it will stop recording.
5.
Select a crawl to keep the format of video images.
6.
Click .
How to configure the history attributes
In the "History" property page to view archived event log report
1.
Please do one of the following terms:
o In the "Settings" dialog box, select "History" tab.
o In the context menu, select "Settings" "History" tab.
Find a “history" Properties dialog box as follows
Notes："History" Properties dialog box on the table will show the event log report.
2.
In the "Show History by category" drop-down menu, select the types of events you want to view. If
you choose one of all the categories, rather than a "full", only shows the items belonging to that category
3.
In the "Showing History by time" drop-down menu, specify the start date and end dates of the you
want to view
4.
Select items which hope to be displayed in the history events
5.
Click “OK”
Alert setting Configuration
Speed DVR enables to connect the camera to the computer to set alarm parameters
Speed DVR enables to set alarm parameters for the camera connected to the computer
1.
Please do one of the following terms：
o In the "Settings" dialog box, select "Alert Settings" tab.
o In the context menu, select "Settings" "" Alert Settings "tab.
Find an "Alert Settings" dialog as follows:
2.
Select a camera.
3.
Drag the slider to adjust the camera's sensitivity to "low", "Medium" or "high."
4.
Select "Sound Alarm" check box, and then click the "Browse" button to select a sound file
5.
Select "Recording Alert" checkbox, and then enter a specific time of recording
6.
Click “OK” button
Schedule Task Creating
Please switch to Schedule Task page in Settings panel, select "Create" button to create a schedule task, Select
recording type, when time is over it will be switched to the specified channels automatically.
ITEM
Create
Edit
Functions
Create a scheduled task, the following Settings dialog box of
Scheduled Tasks appears
Edit selected scheduled task, the following scheduled tasks Settings
dialog box appears
Delete selected file
Delete selected file
Delete All
Delete all files
ITEM
Describe
Name
Task name
Channel
Select recording channel
Type
Select to record the task, or play task
Start Date
Setting start date for the scheduled task
Start Time
Set start date for the scheduled task
Lasting time
Set the duration of the specified recording
FAQ：
1. Receiver
1. Channel Indicator LED is not on:
Please check if the power adaptor of the receiver is well connected, and check if the main power is on.
2. No image, or image received is not clear:
a. Please check if the camera is switched on;
b. To check if the distance between the camera and receiver is too far or if there is something electromagnetic
shielding obstacles between the camera and receiver (such as the steel structure of the building will cause
great obstacles to transmit signals)
c. Does the camera and receiver that corresponds to the frequency, (Notes: within the effective reception
distance , it is not allowed to have two transmitters working on the same time, otherwise they will interfere
with each other, resulting in poor image quality) , and check if the receiver antenna is installed in right
place.
d. Please keep Receiver antenna away from the large electromagnetic shielding materials (such as metals) as
far as possible.
e. The receiver will be interfered by high-power transmission signal which work on the same frequency as well
as the working car radio surrounded.
2. Software
1.
No image on the main window:
Please check if the LED display window character of RC431 corresponds with the emission frequency of camera,
and make sure the camera is working correctly.
2.
Image quality are not satisfactory:
Make sure your camera and Speed DVR Video standard settings are the same, please confirm whether the
settings are correct.
3.
Video Quality are not satisfactory:
Please refer to "Display" property page settings, change the video quality of the documents.
4.
Video file is too large:
If you choose the high quality of AVI format video files for recording, which will take up a lot of disk space,
you could select suitable quality to save video files.
Accessories:
AV cable
1pcs
USB cable
1pcs
RC431 Driver CD
DC5V/500mA power adaptor
User manual
Warranty card
1pcs
1pcs
1pcs
1pcs
CM802
2.4GHz Wireless Camera
The camera connect to power supply, then camera will work.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2011:03:14 17:22:38+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:03:15 17:21:33+08:00
Metadata Date                   : 2011:03:15 17:21:33+08:00
Format                          : application/pdf
Title                           : Microsoft Word - RC431 CM802.doc
Creator                         : Administrator
Document ID                     : uuid:1f50c1b2-cfd7-48fe-af69-f73a6b47e3ad
Instance ID                     : uuid:0e4a970c-b9e9-4fed-b69e-d36db17a9fed
Has XFA                         : No
Page Count                      : 21
Author                          : Administrator

EXIF Metadata provided by EXIF.tools