La Crosse Technology TX144W Wind Speed Weather Station User Manual 7717 00 A

La Crosse Technology Ltd. Wind Speed Weather Station 7717 00 A

Users Manual

7717-00-A说明书,80克双胶纸,黑色印刷尺寸:532x145mm正面 背面QUICK SETUP GUIDEColor Professional Wind StationRX model：327-1417 TX model：TX144W DC 011117Protected Under U.S. Patents: 5,978,738 | 6,076,044 | RE43903 Get StartedPower Up 1. Thermo-Hygro Sensor: 2-AA batteries 2. Wind Sensor: 2-C batteries3. Weather Station: 5.0 volt power cable and 3-AA batteries (optional battery backup) Hold the SET button to enter set mode. Press and release the -/CH and + buttons to make adjustments and the SET Settings Order: 1. Beep ON | OFF 2. Atomic time ON | OFF 3. Time zone 4. Daylight Saving Time ON | OFF 5. 12/24 hour format 6. Hour 7. Minutes 8. Year 9. Month10. Date11. Temperature (ºF/ºC) 12. Wind speed MPH | KMHPlace Outdoor Sensors• Thermo-Hygro Sensor: Position in a shaded location to protect from sun.• Wind Sensor: Position in an high open area, clear from obstructions for 50 feet in all directions. The higher the mounting position, the more accurate the wind readings will be.OptionalDisplay IconsMore Detailed InstructionsTrend/TendencySensor StrengthAlertsTemp. SettingForecast IconPercent RHNorth America Time ZonesAtlanticEasternCentralMountainAlaskaHawaiiASTESTCSTMSTPSTAKTHATPower CableAAAA+-AA+-+-AAAA +-+-Follow this link for more detailed instructions:www.lacrossetechnology.com/327-1417+ C -+ C -Wind SettingAtomic TimeCH 1CH 1FunctionsSet Alerts• Hold ALERTS for 2 seconds to enter alert set mode• Press +/- to adjust values and ALERTSView Wind History• Press WIND to view top wind speed history.View Temperature Details• Press TEMP to view temperature records, feels like records, and dew point.Search for Sensors• Hold TEMP 3 seconds to search for TH sensor• Hold WIND 3 seconds to search for Wind sensorChange Channels (with multiple TH sensors)• Press -/CH to toggle channels (1, 2, 3)Adjust Display Brightness• Press LIGHT to adjust display brightness (HI/LO/OFF) when using the provided power adapter.Exit Menu• Press LIGHT to exit any menuFactory Reset• Hold ALERTS and LIGHT for 5 seconds to resetTX144WCare and Maintenance• Do not mix old and new batteries• Do not mix Alkaline, standard, Lithium, or rechargeable batteries• Always purchase the correct size and grade of battery most suitable for intended use.• Replace all batteries of a set at the same time.• Clean the battery contacts and also those of the device prior to battery installation.• Ensure the batteries are installed with correct polarity (+ and -).• Remove batteries from equipment which is not to be used for an extended period of time.• Promptly remove expired batteries.IndoorTH SensorWind SensorPowerBattery LifeDimensions • Temperature Range: 32°F to 122°F (0°C to 50°C) • Humidity Range: 10% to 99% RH • Update Interval: About every 60 seconds • Temperature Range: -40°F to 140°F (-40°C to 60°C) • Humidity Range: 10% to 99% RH • Update Interval: About every 58 seconds • Transmission Range: 330 ft (100 m) RF 433MHz open air • Wind Speed Range: 0-111.8 mph (0-180 kmh) • Update Interval: About every 30 seconds • Transmission Range: 330 ft (100 m) RF 433MHz open air • Weather Station: 5.0 Volt 150mA adapter included (Primary) • AC6: GPU280500150WAOO • Optional Battery: 3-AA, IEC, LR6 batteries (not included) • TX144W: 2-C, IEC, LR14 batteries (not included) • TX141TH-BCH: 2-AA, IEC, LR6 batteries (not included) • Weather Station: over 12 months when using adapter. • Wind sensor | TH sensor: over 24 months with reputable batteries • Weather Station: 6.88” W x 6.37” H x 1.33” D in (17.5cm W x 16.2cm H x 3.4cm D) • TX144W Wind sensor: 18.57” H x 7.10” W x 7.10” D ( 47.2cm H x 18.0cm W x 18.0cm D) • TX141TH-BCH Sensor: 1.57” W x 5.12” H x 0.79” D (4.0cm W x 13.0cm H x 2.0cm D) WarrantyLa Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please visit the product web page for more information or contact our friendly customer support: Online: www.lacrossetechnology.com/support Phone: 1-608-782-1610View full warranty details online at:www.lacrossetechnology.com/warranty_info.pdfLatest Video Contenthttp://bit.ly/LaxTech_YouTubewww.lacrossetechnology.com/socialmediaFollow Us on Social Media!For Personal Interactionhttp://bit.ly/LaxTech_FacebookJoin the Conversationhttp://bit.ly/LaxTech__TwitterPin and Sharehttp://bit.ly/LaxTech_PinterestFCC Statement—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Canada StatementThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.• For the most accurate wind speed readings, mount the TX141W sensor as the highest object for 50 feet in all directions. • Cups should be on the top of the sensor. Mount vertically.• The maximum wireless transmission range to the wind station is over 300 feet (91 meters) in open air, not including walls or trees.1. Insert mounting pole into sensor.2. Tighten screws.3. Insert bottom of pole into mounting bracket.4. Tighten knob to secure.5. Use screws through the bottom of the mounting bracket to attach.6. The sensor can be mounted from the bottom or side. (the picture is of the sensor mounted from the side)Alternatively:1. Insert your own mounting pole into the sensor.2. Tnot be used).ighten screws(mounting bracket would Note: Do not attempt to insert a pole into the hollow back of the mounting bracket. Position Wind Sensor

Navigation menu