Labway C031H9 MODEM/AUDIO COMBO CARD User Manual MANUAL
Labway Corporation MODEM/AUDIO COMBO CARD MANUAL
Labway >
MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 19093 |
| Application ID | N5R0+J3uXUO0fj1nC1caiQ== |
| Document Description | MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.21kB (115131 bits) |
| Date Submitted | 1999-01-11 00:00:00 |
| Date Available | 1999-02-17 00:00:00 |
| Creation Date | 2001-07-09 15:11:40 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-07-09 15:11:41 |
| Document Title | MANUAL |
USER MANUAL ESS AUDIO/MODEM COMBO CARD November 1998 Reference Version 1.0 ESS Audio/Modem Combo Card TABLE OF CONTENTS 1. DESCRIPTION................................................................... 2 1.1. AUDIO FEATURES ............................................................................. 2 1.2. MODEM FEATURES ........................................................................... 2 1.3. HARDWARE FEATURES ..................................................................... 3 1.4. CARD FIGURE ................................................................................... 3 1.5. CONNECTORS AND JUMPER .............................................................. 4 1.5.1. External Connectors: ..................................................................................... 4 1.5.2. Internal Connectors: ...................................................................................... 4 2. HARDWARE INSTALLATION ...................................... 4 2.1. HANDLING THE COMBO CARD ......................................................... 4 2.2. INSTALLING THE COMBO CARD ........................................................ 4 3. SOFTWARE INSTALLATION........................................ 5 3.1. SOFTWARE CONTENTS ..................................................................... 5 3.2. BEFORE INSTALLING THE COMBO CARD FOR THE FIRST TIME ......... 5 3.3. DEVICE DRIVER .......................................................................... 6 3.3.1. Device Driver Installation Under Windows 95 ........................................... 6 3.3.2. Device Driver Uninstallation Under Windows 95....................................... 6 3.3.3. Checking the Audio Device Driver Installation Under Windows 95........... 7 3.3.4. Checking the Modem Installation Under Windows 95 ................................ 8 3.4. APPLICATION SOFTWARE ........................................................ 9 3.4.1. “TeleConnect” and “AudioRack 32” Application Installation Under Windowsâ 95 ........................................................................................................... 9 3.4.2. Application Uninstallation Under Windowsâ 95........................................... 9 Page - 1 ESS Audio/Modem Combo Card 1. DESCRIPTION Thank you for choosing our ESS Modem/Audio Combo Card, which uses the ES56CVPI chipset. It includes the Maestro-2EM digital audio accelerator, the ES2890S modem processor, the AC’97-compliant ES1918 audio CODEC and the ES2818 modem AFE. The main chipset Maestro-2EM (ES1978) features a hardware wavetable synthesizer with Downloadable Sample (DLS) and complete DirectSound acceleration. Both Microsoftâ’s PC98 and PC97 logo requirements and DOS game compatibility are supported. The Maestro-2EM audio accelerator interfaces with the ES2890S modem processor to offer users a cost-effective PCI audio/modem combination solution. 1.1. Þ Þ Þ Þ Þ Þ Þ Þ Audio Features Interface with ES56 DSP modem solution Hardware wavetable and effect synthesizer Multi-stream Direct Sound and DSSD acceleration 500 MIPSS equivalent processor performance to accelerate multi-stream PC audio 64-channel Wave Processor for direct sound and/or wavetable applications Distributed and PC/PCI DMA, Compaq serial IRQ support and Transparent DMA 3.3 V power supply, 5V - input tolerant Multiple AC’97 CODEC interface with up to 20-bit ADC/DAC audio and signal resolution 1.2. Modem Features Data Mode Capabilities Þ V.90 56 Kbps Þ ITU-T V.34 33600 bps and fallbacks Fax Mode Capabilities Þ ITU-T V.17, V.29, V.27ter, V.21 Ch2 Þ Group 3 (TIA/EIA 578 Class 1 and Class 2) Telephone Capabilities Þ Telephone Answering Machine Þ DTMF generation and detection Þ Full Duplex Speakerphone Þ Caller ID TIES escape sequence Page - 2 ESS Audio/Modem Combo Card Windows 95 Þ UNIMODEM/V Þ TAPI DOS box compatible V.80 (H.324 software stack compatible) 1.3. Hardware Features DSP Þ ESS Maestro-2EM, ES2890, ES2818, ES1918 1.4. Card Figure Transformer T1 T1 PHONE J1 LINE MIC IN J2 JP1 K2 LINE IN AUDIO OUT J4 ESS ES2818P J3 J5 ESS ESS ES1918 MIDI/ JOYSTICK ESS Maestro-2EM Tel.eDrive ES2890S ES1978MS J6 llllllllllllllllllllllllllllllllll llllllll CD-IN Connector J3 Page - 3 SPDIF Connector JP1 ESS Audio/Modem Combo Card 1.5. Connectors and Jumper This Combo Card includes four external Jack Ports, and one external TELEPHONE/LINE Connector, and two internal connectors. 1.5.1. External Connectors: J1: ............................ φ 3.5mm Phone Jack for TELEPHONE φ 3.5mm Line Jack for LINE/WALL J2: ............................ φ 3.5mm Phone Jack for MIC IN J4: ............................ φ 3.5mm Phone Jack for LINE IN J5: ............................ φ 3.5mm Phone Jack for AUDIO OUT J6: ............................ Connector for MIDI/JOYSTICK 1.5.2. Internal Connectors: J3: ............................ Internal Connector for CD-IN (JST) JP1:.......................... Internal Connector for SPDIF (JST) 2. HARDWARE INSTALLATION 2.1. Handling the Combo Card WARNING: Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready to work with it. Follow these precautions when handling the board: Before you open the static protective bag, touch it to a metal expansion slot cover on the back of your computer. This drains static electricity from the package and from your body. Do not touch any exposed printed circuitry after opening the package. Keep other people from touching the board. They might have a static-electricity build-up. Limit your movement. Movement causes a build-up of static electricity. 2.2. Installing the Combo Card Step 1. Step 2. Step 3. Step 4. Step 5. Turn off the system and all peripheral devices. Disconnect the power cord and all peripheral devices from the system. Remove the system cover and identify an unused PCI slot. Unscrew the slot cover plate, plug in the Combo Card, and tighten it with the screw. Plug the telephone cable of the PHONE Jack J1 into the Jack on the back of your telephone. Page - 4 ESS Audio/Modem Combo Card Step 6. Plug the telephone line of the LINE Jack J1 into the Wall Jack on the back of your telephone. Step 7. Plug your microphone cable directly into the MICROPHONE IN Jack J2 of your Combo card. Step 8. Plug your CD-In cable directly into the internal CD-In Connector J3 of your Combo card. Step 9. Plug your LINE-In cable into the external Phone Jack J4 of your Combo card. Step 10. Plug the cable of your Speaker system into J5 of your Combo card. Step 11. Plug the SPDIF cable into the internal SPDIF connector JP1 of your Combo card. Step 12. Put back the system cover, reconnect the system power cord and all peripheral devices. Check and make sure all connections are correct before you turn on the system. 3. 3.1. SOFTWARE INSTALLATION Software Contents There is one Installation CD-title that comes with this package. This CD includes the device driver and application software that you may use under your Microsoftâ Windowsâ 95 operating system. 3.2. Before Installing the Combo Card for the First Time Unimodem/V Installation For proper TAPI function, UNIMODEM/V must be installed on the system prior to the modem installation. It is not necessary to check the existence of Unimodem/V in your system before you plug in the modem card because the provided driver will autoinstall the subsystem. Note: UNIMODEM/V is the new UNIMODEM subsystem provided by Microsoft for Windowsâ 95. These binaries are not included with the Windowsâ 95 release and may change without prior notice. Page - 5 ESS Audio/Modem Combo Card 3.3. DEVICE DRIVER 3.3.1. Device Driver Installation Under Windows 95 If you want to install modem and audio device driver onto your system, please follow the steps as described below: 1.) Start up your Microsoftâ Windowsâ 95 operating system. 2.) The “New Hardware Found” dialog box will display the message "PCI Multimedia Audio Device". Choose the option "Driver from disk provided by hardware manufacturer". 3.) Please, insert the installation-CD into your CD-ROM drive D or E. 4.) Assuming drive D is used, type D:\DRV in the command line and click on the OK push button. 5.) The necessary device drivers will be installed and you will be prompted to restart your computer. 3.3.2. Device Driver Uninstallation Under Windows 95 You may wish to replace your present Combo card with another type. Before doing so go to the Windows Control Panel and select the “Add/Remove Programs” icon. Under the “Add/Remove Programs Properties” dialog box choose the “Install/Uninstall” tap. Select now the “Uninstall ESS Modem” software and click on the “Add/Remove” push button. Windowsâ 95 will enter the Setup program “ESS Maestro-2E Modem Utility”, and the first Setup dialog box will appear as shown on the following page. Page - 6 ESS Audio/Modem Combo Card Select now the radio button “Uninstall Drivers” and click on the “Next>” push button to complete the device driver uninstallation. 3.3.3. Checking the Audio Device Driver Installation Under Windows 95 1.) 2.) 3.) 4.) 5.) Click on the “Start” button on the taskbar. Select “Settings” and open the “Control Panel”. Double-click on the “System” icon. Click on the “Device Manager” tap. Double-click on the “Sound, video and game controller” icon. If everything has been installed correctly, no exclamation mark indicating a conflict will appear next to the list of audio devices. If an exclamation icon does appear, see the trouble shooting section of the modem manual. Please see the “System Properties” window as displayed on the following page. Page - 7 ESS Audio/Modem Combo Card 3.3.4. Checking the Modem Installation Under Windows 1.) 2.) 3.) 4.) 5.) 6.) 95 Click on the “Start” button on the taskbar. Select “Settings” and open the “Control Panel”. Double-click on the “Modem” icon. Click on the “Diagnostics” tap. Select the COM port that the modem “ESS ES56CV-PI Data Fax Voice Modem” has been assigned to. Click on “More Info”. If everything has been installed correctly, the following commands and their results are displayed, “ATI1, ATI2, ATI3, ATI4, ATI5, ATI6, ATI7, AT+FCLA” Page - 8 ESS Audio/Modem Combo Card 3.4. APPLICATION SOFTWARE The bundled software package “TeleConnect” (modem application) and “AudioRack 32” (audio application) might be installed together or separately. 3.4.1. “TeleConnect” and “AudioRack 32” Application Installation Under Windowsâ â 95 If you want to install the application software onto your system please follow the steps as described below. 1.) 2.) 3.) 4.) After you have started up your Microsoftâ Windowsâ 95 operating system click on the START button and choose the RUN item. Please insert the installation CD-title into your CD-ROM drive D or E. Assuming your CD-ROM drive is D, type in the command line of the RUN dialog box D:\SETUP.EXE and click on the OK push button. The necessary application software will be installed onto your system and you will be asked whether or not you want to continue installing the audio application software “AudioRack 32” . Choose the YES push button to proceed with the installation. NOTE: For installing the audio application software at a later time, please type the command D:\AudioRac\SETUP.EXE in the command line of the RUN dialog box and click on the OK push button. Follow the on-screen instructions. 3.4.2. Application Uninstallation Under Windowsâ â 95 You may wish to remove your application software. Before doing so go to the Windows Control Panel and select the “Add/Remove Programs” icon. Under the “Add/Remove Programs Properties” dialog box choose the “Install/Uninstall” tap. Select now: AudioRack p3.03 to remove the Audio application software TeleConnect 1.22 to remove the Modem application software Click on the “Add/Remove” push button. Windowsâ 95 will remove the application software from your system. Reference Version 1.0 Page - 9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:07:09 15:11:40 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:07:09 15:11:41+01:00 Page Count : 10EXIF Metadata provided by EXIF.tools