Laird Connectivity AC4490 RF Transceiver Module User Manual AC4490 AC4486 User s Manual v1 6

Download:
Mirror Download [FCC.gov]
Document ID	406122
Application ID	/r6bjFmL5YwsizW/O1DK6g==
Document Description	Users Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	159.46kB (1993257 bits)
Date Submitted	2004-03-18 00:00:00
Date Available	2004-03-18 00:00:00
Creation Date	2004-03-10 11:00:42
Producing Software	Acrobat PDFWriter 4.0 for Windows NT
Document Lastmod	2004-03-18 14:34:49
Document Title	AC4490 & AC4486 User's Manual v1.6.doc
Document Creator	AC4490 & AC4486 User's Manual v1.6 - Microsoft Word
Document Author:	MATT

Ordering Information
Figure 3 - AC4490 (with Integral GigaAnt Antenna) Mechanical
Figure 4 - AC4490/AC4486 (with Integral Splatch Antenna) Mechanical
11/07/03
45
Ordering Information
11/07/03
46
Ordering Information
7. Ordering Information
7.1 P RODUCT P ART N UMBER T REE
7.2 D EVELOPER K IT P ART N UMBERS
With the exception of part number AC44xx-1x1, all the above part numbers can be ordered as a
development kit by prefacing the part number with “SDK-“. As an example, part number AC4490200A-3 can be ordered as a development kit using the following part number: SDK-AC4490-200A-3.
All Developer Kits include (2) transceivers, (2) Serial Adapter Boards, (2) 6VDC unregulated power
supplies, (2) Serial cables, (2) USB cables, (2) S467FL-6-RMM-915S dipole antennas with 6” pigtail
and MMCX connector, configuration/testing software, and integration engineering support.
11/07/03
47
Agency Compliancy Information
8. Agency Compliancy Information
8.1 A GENCY I DENTIFICATION N UMBERS
Agency compliancy is a very important requirement for any product deployment. AeroComm has
obtained modular approval for its products so the OEM only has to meet a few requirements to be
eligible to use that approval. The corresponding agency identification numbers and approved
antennas are listed in the table below.
Table 16 – Agency Identifi cation Numbers
Part Number
AC4490-200
AC4490-1000
AC4486-5
AC4486-500
US/FCC
KQL-AC4490-100
CAN/IC
2268C-AC4490
EUR/EN
8.2 A PPROVED A NTENNA L IST
Nearson
0600-00025
S467FL-5-RMM-915
Nearson
0600-00024
S467AH-915S
Nearson
0600-00027
S467AH-915
Nearson
0600-00028
S161AH-915R
Nearson
0600-00029
S161AH-915
Nearson
0600-00030
S331AH-915
Nearson
0600-00020
S467FL-6-RMM-868S
Nearson
1020B5812-04 Flavus
ANT-915-SP
gigaAnt
Linx Tech
11/07/03
PM
PM
PM
PM
PM
PM
PM
AC4486-500M
S467FL-5-RMM-915S
AC4486-5M
0600-00019
Gain
(dBi)
Type
½ Wave
Dipole
½ Wave
Dipole
½ Wave
Dipole
½ Wave
Dipole
½ Wave
2.5
Dipole
½ Wave
2.5
Dipole
¼ Wave
Dipole
¼ Wave
Dipole
Microstrip -0.5 PM
Microstrip
-1
PM
AC4486-5A
Manufacturer
AC4490-1000M
Manufacturer Part
Number
AC4490-200M
AeroComm
Part Number
AC4490-200A
Table 17 – AC4490/AC4486 Approved Antenna List
PM
PM
48
Agency Compliancy Information
ANT-868-SP
Linx Tech
Microstrip
-1
PM
8.3 FCC/I NDUSTRY C ANADA (IC) R EQUIREMENTS FOR M ODULAR A PPROVAL
In general, there are two classifications of wireless applications; portable and mobile.
Portable – Portable is a classification of equipment where the user, in general, will be within 20cm of
the transmitting antenna. Portable equipment is further broken into two classes; within 2.5cm of
human contact and beyond 2.5cm (NOTE: Ankles, feet, wrists and hands are permitted to be within
2.5cm of the antenna even if the equipment is designated as being greater than 2.5cm).
Mobile – Mobile defines equipment where the user will be 20cm or greater from the transmitting
antenna. The antenna must be mounted in such a way that it cannot be moved closer to the user with
respect to the equipment, although the equipment may be moved. NOTE: Ankles, feet, wrists and
hands are permitted to be within 20cm of mobile equipment.
8.3.1 OEM Equipment Labeling Requirements
WARNING: The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the
OEM enclosure specifying the appropriate AeroComm FCC identifier for this
product as well as the FCC Notice below. The FCC identifiers are listed above
in the Agency Identification Numbers chart.
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the users's authority to operate the equipment.
11/07/03
49
Agency Compliancy Information
8.3.2 Antenna Requirements
WARNING: This device has been tested with an MMCX connector with the antennas listed
above. When integrated in the OEMs product, these fixed antennas require
installation preventing end-users from replacing them with non-approved
antennas. Any antenna not in the previous table must be tested to comply with
FCC Section 15.203 for unique antenna connectors and Section 15.247 for
emissions. Contact Aerocomm for assistance.
8.3.3 Warnings Required in OEM Manuals
RF Exposure Warning for Portable Equipment (<2.5cm)
WARNING: This equipment has been approved for portable applications where the
equipment can be used in direct contact with the human body. Excessive RF
exposure should be avoided.
RF Exposure Warning for Portable Equipment (>2.5cm)
WARNING: This equipment has been approved for portable applications where the
equipment should be used at distances greater than 2.5cm from the human
body (with the exception of hands, wrists, feet and ankles). Operation at
distances less than 2.5cm is strictly prohibited. Excessive RF exposure should
be avoided.
RF Exposure for Warning for Mobile Equipment
WARNING: This equipment has been approved for mobile applications where the
equipment should be used at distances greater than 20cm from the human
body (with the exception of hands, wrists, feet and ankles). Operation at
distances less than 20cm is strictly prohibited. Excessive RF exposure should
be avoided.
8.4 E UROPE /ETSI R EQUIREMENTS FOR M ODULAR A PPROVAL
Certification is underway and details will be provided shortly.
11/07/03
50

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Creator                         : AC4490 & AC4486 User's Manual v1.6 - Microsoft Word
Create Date                     : 2004:03:10 11:00:42
Title                           : AC4490 & AC4486 User's Manual v1.6.doc
Author                          : MATT
Producer                        : Acrobat PDFWriter 4.0 for Windows NT
Modify Date                     : 2004:03:18 14:34:49+01:00
Page Count                      : 6
Has XFA                         : No

EXIF Metadata provided by EXIF.tools