Laird Connectivity RM191 RM191-SM User Manual Reference Antenna Info A

Laird Technologies RM191-SM Reference Antenna Info A

Reference Antenna Info A

915 MHz PCB Notch Antenna Datasheet The information in this document is subject to change without notice. Confirm the data is current by downloading the latest revision from www.lsr.com. 330-0016-R0.1 Copyright © 2017 LSR Page 1 of 3 902 MHz - 928 MHz PCB Notch -1 dB Antenna SPECIFICATIONS Specification Value Peak Gain -1.5 dBi Average Gain > - 3.7 dBi Impedance 50 ohms, Nominal Type PCB Trace Notch Polarization Linear Vertical VSWR ≤3.0：1, Maximum Frequency 902 - 928MHz Size 60 ×16 mm Operating Temp -40°C to +85°C Table 1 Specifications
915 MHz PCB Notch Antenna Datasheet The information in this document is subject to change without notice. Confirm the data is current by downloading the latest revision from www.lsr.com. 330-0248-R0.1 Copyright © 2017 LSR Page 2 of 3 MATCHING CURCUIT Components R13 = NP C16 = 13nH ± 2% MFG PN: LQW15AN13NG80D R19 = NP
915 MHz PCB Notch Antenna Datasheet The information in this document is subject to change without notice. Confirm the data is current by downloading the latest revision from www.lsr.com. 330-0248-R0.1 Copyright © 2017 LSR Page 3 of 3 CONTACTING LS RESEARCH Headquarters LS Research, LLC W66 N220 Commerce Court Cedarburg, WI 53012-2636 USA Tel: 1(262) 375-4400 Fax: 1(262) 375-4248 Website www.lsr.com Technical Support forum.lsr.com Sales Contact sales@lsr.com The information in this document is provided in connection with LS Research (hereafter referred to as “LSR”) products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of LSR products. EXCEPT AS SET FORTH IN LSR’S TERMS AND CONDITIONS OF SALE LOCATED ON LSR’S WEB SITE, LSR ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL LSR BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF LSR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. LSR makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. LSR does not make any commitment to update the information contained herein. Unless specifically provided otherwise, LSR products are not suitable for, and shall not be used in, automotive applications. LSR’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

Navigation menu