Lambda Technology TWS-G3 True wireless stereo earphones User Manual

Shenzhen Lambda Technology Co.ltd True wireless stereo earphones

User manual

The two earbuds have been connected each other by factory, you don't need to pair them again. The left earbud is the default master one.1. Pick up two earbuds from charging station, then tear the stickers on earbuds first. 2. A few seconds later two earbuds will connect, soon you may hear voice prompt “left channel / right channel”.3. Press and hold main button of each earbuds for 2 seconds simultaneously to power on . A few seconds later two earbuds will connect each other.After two earbuds connected, the master one will automatically enter pairing mode, blue and white lights flash alternately. Then the deputy one is standby mode, blue light flashes once every 7 seconds. Activate the Bluetooth function on your device to search for Bluetooth devices. Look for “G3” in device list display and select. Then you may hear voice prompt “Pairing successful / Second device connected”.If two earbuds connection fails, please turn off two earbuds and follow below operation.Press and hold main button of each earbud for 4 seconds simultaneously until blue and white lights flash alternately. A few seconds later two earbuds will connect. The bluelights will flash 2 times every 2 seconds. Soon you may hear voice prompt “left channel / right channel”.Then follow step 3 in PAIRING BOTH EARBUDS.1. When earbuds are power off, press and hold the main button for 4 seconds until blue and white lights flash quickly, soon you may hear “pairing”.2. Activate the Bluetooth function on your device to search for Bluetooth devices. Look for “G3” in device list display and select.3. When successful connection is made, blue light will flash once every 7 seconds. Left earbud is now ready for use.1. When earbuds are power off, press and hold the main button for 4 seconds until blue and white lights flash quickly, soon you may hear“pairing”.2. Activate the Bluetooth function on your device to search for Bluetooth devices. Look for “G3” in device list display and select.3. When successful connection is made, blue light will ash once every 7 seconds. Right earbud is now ready for use.Make sure the Bluetooth function is available on your electronic device.Specific pairing procedures may vary slightly depending on the device.For detailed information, please refer to your device's User Guide.· Keep the distance between the device and the earbuds within 3 feet (for pairing only).· If no device connection is made within 10 minutes of the earbuds being switched on, the earbuds will automatically switch off to save power.Redred always on.55503FCC Warning:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:o Reorient or relocate the receiving antenna.o Increase the separation between the equipment and receiver.o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.o Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Extreme Temperature 45 degrees max

Navigation menu