Landis Gyr Technologies HUNTSU864 FOCUS AX Modular Gridstream User Manual Exhibit D Product Ship Sheet

Landis+Gyr Technologies, LLC FOCUS AX Modular Gridstream Exhibit D Product Ship Sheet

Contents

Exhibit D - Product Ship Sheet

Landis+Gyr Confidential Information 98-9112 Rev AA 3
High Speed FOCUS AX
Modular Gridstream RF
Endpoint Data Sheet
General
The FOCUS AX Modular Gridstream RF endpoint is designed to accommodate Landis+Gyr
FOCUS AX meters for use in residential and light industrial services. The FOCUS AX Advanced
Function meter is an Active Energy kWh/kW/TOU Meter. The meter features Digital Multiplication
Measurement Technique, meets ANSI standards for performance and utilizes ANSI C12.19 protocol
(between meter and AMR device).
Figure 1 - 1. The FOCUS AX Modular Gridstream RF Endpoint Module and
the Landis+Gyr FOCUS AX Meter
FCC Compliance Information
Model: FASY-0864
FCCID: TEB-HUNTSU864
IC: 5931A-HUNTSU864
500158E2
Hunt Technologies
Model 0864
CONTAINS FCC ID: TEB-HUNTSU864 CONTAINS IC: 5931A-HUNTSU864
RF GRIDSTREAM
High Speed FOCUS AX Modular Gridstream RF Endpoint Data Sheet Landis+Gyr
4 98-9112 Rev AA Landis+Gyr Confidential Information
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
$Changes or modifications not expressly approved by Landis+Gyr for compliance could void
the user’s authority to operate the equipment.
Endpoint Location
To comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the
antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be collocated or operating in conjunction with any other antenna or
transmitter.
Endpoint Usage
The FOCUS AX Modular Gridstream RF endpoint will be used:
• for residential and commercial metering applications.
• at homes and businesses.
The FOCUS AX Modular Gridstream RF endpoint requires professional installation by qualified
personnel.
RF Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the meter off, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult Landis+Gyr or an experienced radio/TC technician for help.
Required Software
To work with the endpoint, you need one of the following software tools:
Landis+Gyr High Speed FOCUS AX Modular Gridstream RF Endpoint Data Sheet
Landis+Gyr Confidential Information 98-9112 Rev AA 5
• Command Center 4.1 or greater.
• RadioShop.
• Network Configuration Manager.
• Landis+Gyr 1132Prog application.
• Endpoint Testing Manager.
• Endpoint Implementation Manager.
Specifications
Table 1-1. FOCUS AX Modular Gridstream RF Endpoint Specifications
Category Specification Value or Range
Compatible
Meters
Landis+Gyr FOCUS AX
Supported Meter Forms
FOCUS AX FOCUS AX-SD
Form Class Form Class
1S 100 1S 100
2S 200 2S 200
2SE 320 12S 200
2K 480 25S 200
3S 120V 10/20
3S 240V 10/20
4S 10/20
12S/25 200
12SE/25 320
16S 200
16SE 320
36(6)S 20
9(8)S 20
45S 20
Electrical Voltage 9-16V (from meter’s power supply)
Power Max: 1.0W
Typical: 0.6W
RF 900 MHz Output Power +26 dBm +/-1 dBm
Adjacent Channel Power 39 dBc Nominal
Transmit Frequency 902 to 928 MHz ISM unlicensed (FCC Part 15)
Communication Protocol Grid Stream Protocol for Command Center
Receive Sensitivity -108 dBm Nominal
High Speed FOCUS AX Modular Gridstream RF Endpoint Data Sheet Landis+Gyr
6 98-9112 Rev AA Landis+Gyr Confidential Information
RF ZigBee Output Power +20 dBm +/-
Adjacent Channel Power 40 dBc Nominal
Transmit Frequency 2405-2480 MHz
Communication Protocol ZigBee Protocol
Receive Sensitivity -104 dBm Minimum
Standards
Compliance
FCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl.
intentional radiators)
IEC 61000 4-2,3,4,5,11,12 Electromagnetic Compatibility
ANSI C12.19 Compatible with Utility Industry End Device
Tables
ANSI C12.20 National Standard for Electricity Meters - 0.2 and
0.5 Accuracy Classes
ANSI C12.21 Code for Electricity Metering
ANSI C37.90.1 (1989) Standard Surge Withstand Capability (SWC) Tests
Environment
al
General Environmental Outdoor, rain-protected, sunlight-exposed
Operating Temperature Range -40 to +70 C (under meter glass)
Humidity 0 to 95% relative humidity, non-condensing
Mechanical Size 3.242 L x 5.315 W x .094 inches, typical
Weight 2.0 ounces (56.7 g), typical
Table 1-1. FOCUS AX Modular Gridstream RF Endpoint Specifications
Category Specification Value or Range

Navigation menu