Landis Gyr Technologies HUNTSU864 FOCUS AX Modular Gridstream User Manual Exhibit D Product Ship Sheet
Landis+Gyr Technologies, LLC FOCUS AX Modular Gridstream Exhibit D Product Ship Sheet
Contents
- 1. Exhibit D - Product Ship Sheet
- 2. Manual
Exhibit D - Product Ship Sheet
High Speed FOCUS AX Modular Gridstream RF Endpoint Data Sheet General The FOCUS AX Modular Gridstream RF endpoint is designed to accommodate Landis+Gyr FOCUS AX meters for use in residential and light industrial services. The FOCUS AX Advanced Function meter is an Active Energy kWh/kW/TOU Meter. The meter features Digital Multiplication Measurement Technique, meets ANSI standards for performance and utilizes ANSI C12.19 protocol (between meter and AMR device). 864 1A-HUNTSU S IC: 593 CONTAIN S FCC ID: TEB-HUNTS U864 CONTAIN TREAM RF GRIDS E2 500158 hnologies Hunt Tec Model 086 Figure 1 - 1. The FOCUS AX Modular Gridstream RF Endpoint Module and the Landis+Gyr FOCUS AX Meter FCC Compliance Information Model: FASY-0864 FCCID: TEB-HUNTSU864 IC: 5931A-HUNTSU864 Landis+Gyr Confidential Information 98-9112 Rev AA High Speed FOCUS AX Modular Gridstream RF Endpoint Data Sheet Landis+Gyr Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Landis+Gyr for compliance could void the user’s authority to operate the equipment. Endpoint Location To comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Endpoint Usage The FOCUS AX Modular Gridstream RF endpoint will be used: • for residential and commercial metering applications. • at homes and businesses. The FOCUS AX Modular Gridstream RF endpoint requires professional installation by qualified personnel. RF Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the meter off, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult Landis+Gyr or an experienced radio/TC technician for help. Required Software To work with the endpoint, you need one of the following software tools: 98-9112 Rev AA Landis+Gyr Confidential Information Landis+Gyr High Speed FOCUS AX Modular Gridstream RF Endpoint Data Sheet • Command Center 4.1 or greater. • RadioShop. • Network Configuration Manager. • Landis+Gyr 1132Prog application. • Endpoint Testing Manager. • Endpoint Implementation Manager. Specifications Table 1-1. FOCUS AX Modular Gridstream RF Endpoint Specifications Category Specification Value or Range Compatible Meters Landis+Gyr FOCUS AX Supported Meter Forms FOCUS AX Electrical RF 900 MHz FOCUS AX-SD Form Class Form Class 1S 100 1S 100 2S 200 2S 200 2SE 320 12S 200 2K 480 25S 200 3S 120V 10/20 3S 240V 10/20 4S 10/20 12S/25 200 12SE/25 320 16S 200 16SE 320 36(6)S 20 9(8)S 20 45S 20 Voltage 9-16V (from meter’s power supply) Power Max: 1.0W Typical: 0.6W Output Power +26 dBm +/-1 dBm Adjacent Channel Power 39 dBc Nominal Transmit Frequency 902 to 928 MHz ISM unlicensed (FCC Part 15) Communication Protocol Grid Stream Protocol for Command Center Receive Sensitivity -108 dBm Nominal Landis+Gyr Confidential Information 98-9112 Rev AA High Speed FOCUS AX Modular Gridstream RF Endpoint Data Sheet Landis+Gyr Table 1-1. FOCUS AX Modular Gridstream RF Endpoint Specifications Category Specification Value or Range RF ZigBee Output Power +20 dBm +/- Adjacent Channel Power 40 dBc Nominal Transmit Frequency 2405-2480 MHz Communication Protocol ZigBee Protocol Receive Sensitivity -104 dBm Minimum FCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl. intentional radiators) IEC 61000 4-2,3,4,5,11,12 Electromagnetic Compatibility ANSI C12.19 Compatible with Utility Industry End Device Tables ANSI C12.20 National Standard for Electricity Meters - 0.2 and 0.5 Accuracy Classes ANSI C12.21 Code for Electricity Metering ANSI C37.90.1 (1989) Standard Surge Withstand Capability (SWC) Tests General Environmental Outdoor, rain-protected, sunlight-exposed Operating Temperature Range -40 to +70 C (under meter glass) Humidity 0 to 95% relative humidity, non-condensing Size 3.242 L x 5.315 W x .094 inches, typical Weight 2.0 ounces (56.7 g), typical Standards Compliance Environment al Mechanical 98-9112 Rev AA Landis+Gyr Confidential Information
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 4 Producer : GPL Ghostscript 8.15 Create Date : 2010:04:13 11:59:55 Modify Date : 2010:04:13 11:59:55 Title : C:\Documents and Settings\car...t.IE5\0T7Q8J6A\98-9112[1].pdf Creator : Adobe Acrobat 8.0 Author : carljEXIF Metadata provided by EXIF.tools