Landis Gyr Technology EC1R2S4 L+G S4e 2G UTILINET ENDPOINT User Manual INSTALLATION GUIDE

Download:
Mirror Download [FCC.gov]
Document ID	826782
Application ID	N5+1lvZH1NTUKgoKwOF2hA==
Document Description	INSTALLATION GUIDE
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	56.55kB (706901 bits)
Date Submitted	2007-08-08 00:00:00
Date Available	2007-08-09 00:00:00
Creation Date	2007-08-07 14:34:50
Producing Software	Adobe Acrobat 6.0
Document Lastmod	2007-08-07 14:34:52
Document Title	INSTALLATION GUIDE
Document Creator	Adobe Acrobat 6.0

Certification Test Report
Frequency Hopping Spread Spectrum Transmitter
FCC ID: R7PEC1R2S4
IC: 5294A-EC1R2S4
FCC Rule Part: 15.247
IC Radio Standards Specification: RSS-210
ACS Report Number: 07-0269
Manufacturer: Cellnet Technology, Inc.
Model: L+G S4e 2G Utilinet Endpoint
Installation Guide
5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598
Cellnet Landis + Gyr S4e
2G UtiliNet Module
Technical Reference Guide
Proprietary Rights Notice
This manual is an unpublished work and contains the trade secrets and confidential
information of Cellnet, which are not to be divulged to third parties and may not be
reproduced or transmitted in whole or part, in any form or by any means, electronic or
mechanical for any purpose, without the express written permission of Cellnet. All rights
to designs or inventions disclosed herein, including the right to manufacture, are reserved
to Cellnet.
The information contained in this document is subject to change without notice. Cellnet
reserves the right to change the product specifications at any time without incurring any
obligations.
Trademarks Used in This Manual
Cellnet® is a registered trademark of Cellnet Innovations, Inc.
Other brands or product names are the trademarks or registered trademarks of their
respective holders.
Cellnet Concentrator User and Installation Guide
YetJMMTMJd_JMRKMT[
`ÉääåÉí
PMMMM=jáää=`êÉÉâ=^îÉåìÉ
pìáíÉ=NMM
^äéÜ~êÉíí~I=d^=PMMOO
qÉäW=ESTUF=ORUJNRMM
c~ñW=ESTUF=ORUJNRRM
áá
`çéóêáÖÜí«=OMMT
`ÉääåÉí
^ää=êáÖÜíë=êÉëÉêîÉÇK
TABLE OF CONTENTS
PREFACE
^_lrq=qefp=drfab= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJN
tÜç=pÜçìäÇ=rëÉ=qÜáë=dìáÇÉ= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJN
eçï=qÜáë=dìáÇÉ=fë=lêÖ~åáòÉÇ==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJN
qvmldo^mef`^i=`lksbkqflkp= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJN
`lkq^`qfkd=qb`ekf`^i=prmmloq= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJO
qÉäÉéÜçåÉ=^ÅÅÉëë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJP
bã~áä=^ÅÅÉëë= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJP
lêÇÉêáåÖ=mìÄäáÅ~íáçåë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJP
mìÄäáÅ~íáçå=`çããÉåíë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJP
obi^qba=mr_if`^qflkp= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJQ
CHAPTER 1
OVERVIEW
p^cbqv=lsbosfbt==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJN
^_lrq=qeb=`biikbq=kbqtloh= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJN
obnrfoba=plcqt^ob= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJN
jlarib=lsbosfbt==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJO
^Äçìí=íÜÉ=i^k=fa= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJP
i~ÄÉäë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJP
pÜçÅâ=e~ò~êÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJP
`çãéäá~åÅÉ= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJP
båîáêçåãÉåí~ä=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJQ
CHAPTER 2
FEATURES AND FUNCTIONS
`çããìåáÅ~íáåÖ=îá~=jÉíÉê=íç=jçÇìäÉ=`çååÉÅíáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJN
båÇéçáåí=oÉÖáëíê~íáçå= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJN
oÉíêáÉîáåÖ=a~í~= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJO
aÉã~åÇ=oÉëÉí==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJO
qáãÉ=póåÅÜêçåáò~íáçå= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJO
mçïÉê=lìí~ÖÉLoÉëíçê~íáçå= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJP
pìééçêíáåÖ=m~ëëïçêÇë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJP
açïåäç~ÇáåÖ=cáêãï~êÉ= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJP
båÅêóéíáåÖ=a~í~= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJP
`lkcfdro^qflk=q^_ibp= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJP
qolr_ibpellqfkd= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJQ
APPENDIX A
CONFIGURATION TABLES
jlarib=`lkcfdro^qflk=q^_ib= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==^JN
APPENDIX B
COMPLIANCE
c``=`i^pp=_= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==_JN
oc=bñéçëìêÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==_JN
fkarpqov=`^k^a^=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==_JO
INDEX
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
ááá
q~ÄäÉ=çÑ=`çåíÉåíë
áî
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
LIST OF FIGURES
Figure
NKN
NKO
OKN
Figure Titles
Page
jçÇìäÉ=ïáíÜ=ä~ÄÉäë=Å~ääÉÇ=çìí =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJO
i~åÇáë=H=dóê=pQÉ=Od=ãÉíÉêK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJP
pÉêá~ä=ÅçååÉÅíáçå=ÄÉíïÉÉå=ãçÇìäÉ=~åÇ=ãÉíÉê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJN
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
î
iáëí=çÑ=cáÖìêÉë
Figure
îá
Figure Titles
Page
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
LIST OF TABLES
Table
mKN
mKO
^KN
Table Titles
Page
aÉëÅêáéíáçå=çÑ=`Ü~éíÉêëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=KmJN
oÉä~íÉÇ=mìÄäáÅ~íáçåë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=KmJQ
jçÇìäÉ=`çåÑáÖìê~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K^JN
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
îáá
iáëí=çÑ=q~ÄäÉë
Table
îááá
Table Titles
Page
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
PREFACE
This guide includes technical information about Cellnet’s UtiliNet endpoint
module (“the module”) for the Landis + Gyr S4e 2G meter. Any training provided
directly by the utility or by the Cellnet project management team takes
precedence over this guide.
ABOUT THIS GUIDE
This is the May 2007 edition of the Cellnet Landis + Gyr S4e 2G UtiliNet Module
Technical Reference Guide. It provides:
•
Definition and purpose of the module.
•
Features, functions, and communications of the module.
•
Troubleshooting.
Who Should Use This Guide
This guide is intended for use by utility or Cellnet engineers, technicians, and
project managers. It does not assume an expert level of industry or computer
knowledge. This guide does assume that you are familiar with basic:
–
Utility operations.
–
Terminology of your industry.
–
Landis + Gyr S4e meter and meter operations.
How This Guide Is Organized
Table P.1 illustrates how this guide is organized.
Table P.1 Description of Chapters
Chapter
Title
Description
lîÉêîáÉï
^Äçìí=íÜÉ=åÉíïçêâI=ãçÇìäÉI=~åÇ=ëçÑíï~êÉ
cÉ~íìêÉë=~åÇ=
cìåÅíáçåë
aÉëÅêáéíáçå=çÑ=íÜÉ=ãçÇìäÉÛë=Å~é~ÄáäáíáÉë=~åÇ=ÑÉ~íìêÉë=
~åÇ=ÅçåÑáÖìê~íáçå=í~ÄäÉë
TYPOGRAPHICAL CONVENTIONS
This section describes the conventions used in this guide to make finding and
understanding information easier. Text formatting identifies special information.
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
mJN
mêÉÑ~ÅÉ
Convention
Description
All bold, initial capital
letters
Refers to field names, buttons, menus, menu
options, and keys. Examples: Device field, Open
button, File menu, or Ctrl key.
All bold lower‐case letters
Refers to the exact keystrokes you enter. What you
type is always shown in lowercase letters.
Example: Type local in the Device field.
Italicized lower‐case word
between less‐than sign (<)
and greater‐than sign (>)
Refers to variables that occur in item names.
Example: Add Sub Network To 
dialog, where  refers to the name of
a network.
 |  |
...
Refers to the sequence of choices you should make
to access a specific dialog or menu option.
Examples: choose Start | Settings | Control Panel
or choose File | Open.
Plus sign (+) between keys
Refers to pressing the keys at the same time.
Example: Alt+B.
Comma (,) between keys
Refers to keys which are pressed sequentially.
Example: Alt,F.
Note boxes provide essential information about the module.
Cautions provide information that you must read to avoid making relatively moderate errors
when working with the module.
Warnings provide special must-read information. If you ignore a warning, you may
omit essential data or make a critical error. Warnings are in the same format as
notes, except they are shown in bold red text.
CONTACTING TECHNICAL SUPPORT
Cellnet technical support is available by telephone or email. When you contact
technical support, be prepared to give exact descriptions of:
mJO
•
The problem you encountered
•
What happened and what you were doing when the problem occurred
•
How you tried to solve the problem
•
The exact text of any error messages
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
mêÉÑ~ÅÉ
Telephone Access
Technical support is available Monday through Friday from 8:00 a.m. to 5:00 p.m.
(EST) by calling 800‐791‐2567. If all support technicians are helping other
customers, your call will be routed to the Cellnet Support voice mail system.
Leave a brief message that includes the following information:
•
Your name
•
Your company’s name
•
Your telephone number
A support technician will return your call as soon as possible within normal
business hours. Technicians return all calls in the order that they are received.
Email Access
If you prefer, you may email a description of your problem to:
customersupport@cellnet.com
A support technician will return your email as soon as possible within normal
business hours. Technicians return all emails in the order that they are received.
Ordering Publications
You can order publications from your sales representative. To order additional
copies of this manual, use order number:
HW‐0070‐GB‐05.07
Publication Comments
Cellnet welcomes your feedback and comments. If you have comments or
suggestions for improving this publication, there is a form for reader’s comments
at the back of this manual. If you would like a reply, include your contact
information:
•
Name
•
Telephone number or fax number
•
Email address
•
Company name and address
Be sure to include the following information along with your comment:
•
Title and number of this manual
•
Page number or topic related to your comment
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
mJP
mêÉÑ~ÅÉ
RELATED PUBLICATIONS
The following documents provide important related information.
Table P.2 Related Publications
Document Name
mJQ
Document Description
`ÉääåÉí=bäÉÅíêáÅ=jÉíÉê
fåëí~ää~íáçå=dìáÇÉ
aÉëÅêáÄÉë=ÉäÉÅíêáÅ=ãÉíÉê=áåëí~ää~íáçå=éêçÅÉÇìêÉëK
kÉíïçêâ=`çåÑáÖìê~íáçå=
j~å~ÖÉê=rëÉêë=dìáÇÉ
aÉëÅêáÄÉë=ìë~ÖÉ=çÑ=kÉíïçêâ=`çåÑáÖìê~íáçå=j~å~ÖÉê=
ëçÑíï~êÉ=~ééäáÅ~íáçåI=áåÅäìÇáåÖ=Üçï=íç=éêçÖê~ã=íÜÉ=
ÅçåÅÉåíê~íçêK
o~ÇáçëÜçé=PKQ=dÉííáåÖ=
pí~êíÉÇ=dìáÇÉ
aÉëÅêáÄÉë=íÜÉ=o~ÇáçëÜçé=~ééäáÅ~íáçåI=áåÅäìÇáåÖ=ìéÇ~íáåÖ=
Ñáêãï~êÉ=~åÇ=ïçêâáåÖ=ïáíÜ=ríáäákÉí=ê~ÇáçëK
ríáäákÉí=pçäìíáçå=`ÉåíÉê=
léÉê~íçêë=dìáÇÉ
aÉëÅêáÄÉë=íÜÉ=ríáäákÉí=pçäìíáçå=`ÉåíÉê=Ä~Åâ=ÉåÇ=
çéÉê~íáçåë
ríáäákÉí=pçäìíáçå=`ÉåíÉê=rëÉêë=
dìáÇÉ
aÉëÅêáÄÉë=íÜÉ=ríáäákÉí=pçäìíáçå=`ÉåíÉê=Ñêçåí=ÉåÇ=
~ééäáÅ~íáçåëK
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
CHAPTER 1
OVERVIEW
This chapter contains an overview of the Cellnet network and the module.
SAFETY OVERVIEW
Prior to starting the installation process, you must develop and launch an installer
safety training plan for initial, refresher and ongoing safety training. Ensure that
installers receive appropriate initial and refresher training to meet their specific
safety‐related responsibilities. You must provide safety training when
•
An existing installer assumes new duties for which he or she has not
previously received training
•
New processes and methodologies representing new risks are introduced
into the installation environment
•
Previously unidentified risks are reported.
The installation supervisory team assumes responsibility for ensuring that
installers are properly trained, authorized, and continually qualified to perform
their work. The team must also take responsibility for the safety of their installers
and to assure safe work methodologies. Installers must understand that their
supervisorʹs responsibility does not relieve them from their individual
responsibility to perform the work safely and to follow all safety rules and
procedures applicable to their work.
ABOUT THE CELLNET NETWORK
The Cellnet Automated Meter Infrastructure (AMI) network transfers
information from a number of endpoints, usually distributed over a large
geographical area to a back‐end host. The most common endpoints are from
electrical, gas and water meters. The network includes a Radio Frequency (RF)
Wide Area Network (WAN) and an RF Local Area Network (LAN). The WAN
includes Take Out Points (TOPs), repeaters, and concentrators. The LAN is the
radio frequency (RF) link between the concentrator and Cellnet endpoints.
•
1‐way endpoints transmit data via RF to the concentrator, where it is stored
and processed. The concentrator transmits the data via RF to the TOP.
•
2‐way endpoints transmit data via RF to UtiliNet network radios, which pass
data via RF to the TOP. The TOP sends data to the utility via Ethernet.
REQUIRED SOFTWARE
To work with the module, you need one of the following software tools:
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
NJN
lîÉêîáÉï
•
UtiliNet Solution Center
•
RadioShop
•
Network Configuration Manager
•
L+G 1132Prog application
•
Endpoint Testing Manager
•
Endpoint Implementation Manager
MODULE OVERVIEW
The module is the Cellnet radio that communicates with the network.
FCC ID
IC ID
PRODUCT
LABEL
LAN ID
Figure 1.1 Module with labels called out
NJO
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
lîÉêîáÉï
The module is not available as a stand‐alone product. To order a S4e 2G module,
the Cellnet kit number is 40‐1083. To order directly from L+G, visit their website
at http://www.landisgyr.com.
The meter kit includes:
•
meter
•
module
•
antenna.(qualified with Landis + Gyr PN 71654)
Figure 1.2 Landis + Gyr S4e 2G meter
About the LAN ID
The LAN ID is a unique identifier for each Cellnet module. It always displays in
hex. Cellnet provides the LAN address. You cannot change the LAN ID of a radio.
Labels
The module includes the following labels:
•
Cellnet LAN ID, includes programmed module part number (printed and
barcoded)
•
Cellnet Product ID (printed and barcoded)
•
FCC ID: R7PEC1R2S4 (stamped)
•
ICC ID: 5294A‐EC1R2S4 (stamped)
Shock Hazard
Beware of hazardous electrical voltages. Do not touch the board or any external
connections, such as the antenna, when the meter board is powered up.
Compliance
The module meets the following standards:
•
ANSI C12.20
American National Standard for Electricity Meters ‐ 0.2 and 0.5 Accuracy
Class
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
NJP
lîÉêîáÉï
•
ANSI C12.1
American National Standard for electricity Meters ‐ code for electricity
metering
•
FCC ‐ CFR Part 15.247
Radio Frequency Devices, Subparts A‐General and B‐Unintentional Radiators
For details on FCC and Industrie Canada compliance, see Appendix B,
Compliance.
Environmental
NJQ
Operating Temperature Range
‐40° to +85° Celsius
Storage Temperature Range
‐40° to +85° Celsius
Operating Vibration
IEC 68‐2‐6
Operating Shock IEC
68‐2‐27
Humidity ANSI 12.20
5.4.3.18
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
CHAPTER 2
FEATURES AND FUNCTIONS
Using the Landis + Gyr S4e with 2G module, you can:
•
Integrate module into all forms, classes and voltages of the S4E meter
•
Communicate via serial connection between the module and the meter
through the meterʹs provided interface
•
Support all levels of meter passwords
•
Download radio firmware
Communicating via Meter to Module Connection
The serial connection is a 12‐pin ribbon cable that contains:
•
Full duplex serial connection. The baud rate is 9600, 8 bits, 1 stop bit, no
hardware hand‐shaking.
•
Power fail indication signal from the meter that tells the module to disconnect
from drawing power from the meter.
•
DC power line which supplies power to the module from the meter.
Figure 2.1 Serial connection between module and meter
Endpoint Registration
After the endpoint is installed in the field, register it with the USC Host. You can
register the endpoint during installation using the UtiliNet 2‐Way
Implementation Manger tool, or from the host. See the UtiliNet Solution Center
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
OJN
cÉ~íìêÉë=~åÇ=cìåÅíáçåë
Users Guide for more information, The Host sends the endpoint registration
command to the endpoint. The command configures several services provided by
the communication module, including the following:
•
Default Take Out Point destination
•
Reporting interval for Register Data
•
Reporting interval for Interval Data
•
Meterʹs AMR‐level security password
•
Time Synchronization parameters
•
GMT offset
This command also initializes several processes, including the following:
•
Periodic Register Data reporting
•
Periodic LP Data reporting
•
Time Synchronization process
The command reads and returns key meter and module configuration data
required by the Host to properly interpret data collected by the meter.
Retrieving Data
The module performs data retrieval from the meter on request (ORR) or
autonomously (periodically reported).
Availability of the following features depends on meter configuration. On
Request Reads (ORR) available with this module are:
•
Register Data (Standard Table 23) which includes consumption, demand and
TOU values
•
Load Profile or Interval Data (Standard Table 64)
•
Revenue Integrity Services which includes instantaneous measurements
related to line voltage, current and phase angle
Availability of the following features depends on meter configuration. Options
for periodic reported data with this module include:
•
Register Data & Status Flags (Standard Tables 23 & 3) which includes
consumption, demand, TOU values and meter status
•
Load Profile or Interval Data & Status Flags (Standard Tables 64 & 3) which
includes interval data and meter status
Demand Reset
When the USC Host delivers a Demand Reset command, the communication
module passes the command to the meter, which performs the Demand Reset on
the meter. The endpoint then passes the previous demand data captured by the
meter (Standard Table 25) to the USC Host for processing.
Time Synchronization
Time synchronization is the process of keeping the meter time synchronized with
the UtiliNet network time within a configurable limit. The communication
module automatically keeps its time synchronized with the UtiliNet network via
periodic background process. The communication module reads the meter date/
clock table (Standard Table 52) periodically, determined by its configuration. If
the time drift between meter and communication module exceeds the configured
threshold, it sends a time synchronization alert message to the USC Host. The
Host schedules a time change event for the meter and sends it to the
OJO
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
cÉ~íìêÉë=~åÇ=cìåÅíáçåë
communication module. The time of the change is determined such that the
meterʹs data integrity is maintained. At the scheduled time, the communication
module executes the standard procedure to change date/time on the meter.
Power Outage/Restoration
When an outage occurs, the meter uses an early power failure signal to alert the
communication module to disconnect from the meterʹs power immediately. The
communication module saves critical module data to non‐volatile memory and
creates and sends a power outage message. This message includes the following
information:
•
LAN ID
•
Outage time
•
Reboot count.
The module sends the message, then assists with routing other packets until the
back‐up energy source can no longer keep the radio alive. The time that this
energy source is available varies with several factors, including amount of data
packets being routed, environmental conditions and age of endpoint. Generally, a
hold‐up time of ~45 seconds is typical.
At restoration, the communication module first acquires network connectivity.
With network communications restored, the module sends a power restoration
message that includes details such as:
•
LAN ID
•
Outage time
•
Restoration time
•
Reboot count.
The communications module stores a history of up to the last five power outage
and restoration event pairs. The USC Host can request this data.
Supporting Passwords
The meter/module supports passwords provided by the utility.
Downloading Firmware
Enable meter firmware remotely via host or RadioShop. The module can remotely
initiate a self‐restart with communications enabled, if the downloaded firmware
causes a catastrophic functional failure. Once the module completely receives the
new code, it operates with the new code.
Encrypting Data
The UtiliNet Network currently supports use of one encryption key per network.
If you enable the S4e with encryption, the host must have a matching encryption
key. For more information about encryption in the UtiliNet Solution Center host,
see the UtiliNet Solution Center Operators Guide.
CONFIGURATION TABLES
The UtiliNet Module Configuration structure passes the data to configure the
module. It is used for both C&I and Residential applications. Detailed
information about the configuration tables is available in Appendix A,
Configuration Tables.
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
OJP
cÉ~íìêÉë=~åÇ=cìåÅíáçåë
This table is currently 55 bytes long. It contains information necessary to
configure several services on the module, such as firmware reads, autonomous
data return configuration.
The module receives the packet, and using the data, configures its own operation.
The host maintains a record of the module’s configuration.
TROUBLESHOOTING
Contact Cellnet Customer Support at customersupport@cellnet.com or call 800‐
791‐2567 with any questions or problems, and they will guide you through the
troubleshooting process.
OJQ
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
APPENDIX A
CONFIGURATION TABLES
MODULE CONFIGURATION TABLE
Table A.1 Module Configuration
Item
S4e Default Value Descr
General Descr
Notes
m~ÅâÉí=
`çåíÉåíë
qÜÉ=`çåÑáÖ=_óíÉë=NJR=~êÉ=
íÜÉ=çåäó=ÑÉ~íìêÉë=
ã~ëâÉÇ=çìí=Äó=íÜáë=
î~äìÉK=qÜáë=áë=ÄÉÅ~ìëÉ=
íÜÉ=pQÉ=Od=a`t=ÇçÉë=
åçí=Å~éíìêÉ=im=Ç~í~=áå=
íÜÉ=ríáäákÉí=ãçÇìäÉK
fÇÉåíáÑáÉë=ïÜáÅÜ=
ÉäÉãÉåíë=áå=íÜáë=é~ÅâÉí=
~êÉ=ëÉíK=bäÉãÉåíë=íÜ~í=
~êÉ=åçí=ëÉí=~êÉ=áÖåçêÉÇK=
qÜÉêÉ=ëíáää=ãìëí=ÄÉ=~=
éä~ÅÉ=áå=íÜÉ=é~ÅâÉí=Ñçê=áíI=
íÜçìÖÜK
tÜÉå=íÜÉ=ÅçåÑáÖìê~íáçå=áë=ëÉåíI=~ää=RR=ÄóíÉë=
ãìëí=ÄÉ=éêçîáÇÉÇK=låäó=íÜÉ=î~äìÉë=íÜ~í=
Ü~îÉ=íÜÉ=ã~ëâ=Äáí=ëéÉÅáÑáÉÇ=~êÉ=ìëÉÇK=
ã~ëâ`çåÑáÖ_óíÉë=Z=MMMNÜ
ã~ëâimoÉéçêíáåÖfåíÉêî~ä=Z=MMMOÜ
ã~ëâmìãémÉêáçÇoÉÖáëíÉê=Z=MMMQÜ
ã~ëâmìãémÉêáçÇofp=Z=MMMUÜ
ã~ëâmìãémÉêáçÇpí~íìë=Z=MMNMÜ
ã~ëâmìãépå~éoÉ~Ç=Z=MMOMÜ
ã~ëârëÉêfa=Z=MMQMÜ
ã~ëâiçÖçårëÉê=Z=MMUMÜ
ã~ëâpÉÅìêáíóm~ëëïçêÇ=Z=MNMMÜ
ã~ëâpìëí~áåÉÇlìí~ÖÉaìê~íáçå=Z=MOMMÜ
ã~ëâj~ñjÉíÉêqáãÉaêáÑí=ZMQMMÜ
ã~ëâjÉíÉêqáãÉoÉ~ÇmÉêáçÇ=Z=MUMMÜ
ã~ëâdjqlÑÑëÉí=Z=NMMMÜ
`çåÑáÖ=_óíÉ=N
kçí=rëÉÇK=j~ëâÉÇ=çìí=
Äó=íÜÉ=m~ÅâÉí=`çåíÉåíë=
ÑáÉäÇ
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
`çåÑáÖ=_óíÉ=O
kçí=rëÉÇK=j~ëâÉÇ=çìí=
Äó=íÜÉ=m~ÅâÉí=`çåíÉåíë=
ÑáÉäÇ
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
`çåÑáÖ=_óíÉ=P
kçí=rëÉÇK=j~ëâÉÇ=çìí=
Äó=íÜÉ=m~ÅâÉí=`çåíÉåíë=
ÑáÉäÇ
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
`çåÑáÖ=_óíÉ=Q
kçí=rëÉÇK=j~ëâÉÇ=çìí=
Äó=íÜÉ=m~ÅâÉí=`çåíÉåíë=
ÑáÉäÇ
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
`çåÑáÖ=_óíÉ=R
kçí=rëÉÇK=j~ëâÉÇ=çìí=
Äó=íÜÉ=m~ÅâÉí=`çåíÉåíë=
ÑáÉäÇ
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
oÉéçêíáåÖ=
fåíÉêî~ä=im
OQM=ãáåìíÉë=EQ=ÜçìêëF
få=jáåìíÉëK=wÉêç=Çáë~ÄäÉë=
íÜÉ=im=éìãéK
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=Od=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
^JN
`çåÑáÖìê~íáçå=q~ÄäÉë
Table A.1 Module Configuration
Item
^JO
S4e Default Value Descr
General Descr
Notes
mìãé=mÉêáçÇ=
oÉÖáëíÉê
PSM=ãáåìíÉë=ES=ÜçìêëF
få=jáåìíÉëK=wÉêç=Çáë~ÄäÉë=
íÜÉ=êÉÖáëíÉê=éìãéK
mìãé=mÉêáçÇ=
ofp
M=ãáåìíÉëI=ïÜáÅÜ=ãÉ~åë=
áí=áë=Çáë~ÄäÉÇK
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
mìãé=mÉêáçÇ=
pí~íìë
M=ãáåìíÉëI=ïÜáÅÜ=ãÉ~åë=
áí=áë=Çáë~ÄäÉÇK
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
mìãé=mÉêáçÇ=
på~é=oÉ~Ç
M=ãáåìíÉëI=ïÜáÅÜ=ãÉ~åë=
áí=áë=Çáë~ÄäÉÇK
kçí=ìëÉÇK
`ìêêÉåí=a`t=îÉêëáçå=ÇçÉë=åçí=ëìééçêí=
íÜáëK=s~äìÉ=áë=MK
rëÉê=fa
kç=ÅçåîÉêëáçåX=íÜÉ=fa=áë=
àìëí=NK
O=ÄóíÉ=rëÉê=fa=ìëÉÇ=
ïÜáäÉ=êìååáåÖ=^kpf=
içÖçå=pÉêîáÅÉ
rëÉÇ=íç=äçÖ=ìëÉê=~ÅíáîáíóK=aç=åçí=ÅÜ~åÖÉI=
ÉîÉå=íÜçìÖÜ=åçí=êÉäÉî~åí=íç=ãÉíÉêK
içÖçå=rëÉê
`ÉääåÉí^jo
NM=ÄóíÉ=rëÉê=k~ãÉ=íÜ~í=
áë=ìëÉÇ=ïÜáäÉ=êìååáåÖ=íÜÉ=
^kpf=içÖçå=pÉêîáÅÉ
aç=åçí=ÅÜ~åÖÉI=ÉîÉå=íÜçìÖÜ=åçí=êÉäÉî~åí=íç=
ãÉíÉêK
pÉÅìêáíó=
m~ëëïçêÇ
_ó=ÇÉÑ~ìäí=íÜÉ=é~ëëïçêÇ=
áë=ÉãéíóK
qÜÉ=Ñìää=OM=ÄóíÉë=~êÉ=
êÉèìáêÉÇ=Ñçê=íÜÉ=pQÉK=
cçê=íÜÉ=pQÉI=íÜáë=áë=~=ìëÉê=ÇÉÑáåÉÇ=
é~ëëïçêÇK=qÜáë=ãìëí=ã~íÅÜ=íÜÉ=é~ëëïçêÇ=
íÜ~í=áë=éêçÖê~ããÉÇ=áå=íÜÉ=ãÉíÉê=çê=íÜÉ=
~ëëáÖåÉÇ=^jo=é~ëëïçêÇK=få=çêÇÉê=íç=ìëÉ=~ää=
çÑ=íÜÉ=ÑÉ~íìêÉë=~î~áä~ÄäÉ=áå=íÜÉ=a`tI=íÜáë=
ãìëí=ÄÉ=íÜÉ=ãÉíÉêDë=ÜáÖÜÉëí=äÉîÉä=
é~ëëïçêÇK
pìëí~áåÉÇ=
lìí~ÖÉ=
aìê~íáçå
PM=ëÉÅçåÇë
aÉÑáåÉë=íÜÉ=åìãÄÉê=çÑ=
ëÉÅçåÇë=~ÑíÉê=ïÜáÅÜ=~å=
çìí~ÖÉ=ïáää=ÄÉ=Åä~ëëáÑáÉÇ=
~ë=ëìëí~áåÉÇK=fÑ=äÉëë=íÜ~å=
íÜáë=~ãçìåíI=íÜÉ=çìí~ÖÉ=
áë=ãçãÉåí~êóK=^=î~äìÉ=çÑ=
òÉêç=ïáää=Å~ìëÉ=~ää=
çìí~ÖÉë=íç=ÄÉ=
ÅçåëáÇÉêÉÇ=?ëìëí~áåÉÇ?K=
j~ñ=jÉíÉê=
qáãÉ=aêáÑí
OM=ëÉÅçåÇë
qÜÉ=åìãÄÉê=çÑ=ëÉÅçåÇë=
íÜ~í=íÜÉ=ãÉíÉê=ÅäçÅâ=Å~å=
ÇêáÑí=Ñêçã=íÜÉ=ê~Çáç=ÅäçÅâI=
~ÑíÉê=ïÜáÅÜ=~å=~ä~êã=áë=
íêáÖÖÉêÉÇK
jÉíÉê=qáãÉ=
oÉ~Ç=mÉêáçÇ
PM=ãáåìíÉë
qÜÉ=éÉêáçÇ=~í=ïÜáÅÜ=íÜÉ=
ãçÇìäÉ=ÅÜÉÅâë=íÜÉ=íáãÉ=
áå=íÜÉ=ãÉíÉêK=få=pÉÅçåÇë
djq=lÑÑëÉí
kç=çÑÑëÉí=Äó=ÇÉÑ~ìäíK=qÜÉ=
ríáäákÉí=ãçÇìäÉ=áë=áå=
djq=íáãÉK
qÜÉ=djq=lÑÑëÉí=áå=NR=
ãáåìíÉ=áåÅêÉãÉåíëK=
páÖåÉÇK
s~äáÇ=î~äìÉë=~êÉ=JNOU=
EMñUMFI=ÅçêêÉëéçåÇáåÖ=íç=
djqJPOÜçìêë=íç=HNOT=
EMñTcFI=ÅçêêÉëéçåÇáåÖ=íç=
djqH=PNÜçìêë=
tÜÉå=ÉñÅÉÉÇÉÇI=Å~ìëÉë=~å=ÉîÉåí=íç=ÄÉ=
ëÉåí=íç=íÜÉ=ÜçëíI=ïÜáÅÜ=êÉëéçåÇë=áå=âáåÇ=Äó=
ëÉåÇáåÖ=~=íáãÉ=ëóåÅ=Åçãã~åÇ=íç=íÜÉ=
ÇÉîáÅÉK
qÜÉ=ríáäákÉí=ãçÇìäÉ=ïáää=ëíáää=ã~áåí~áå=íáãÉ=áå=
djqI=Äìí=~åó=íáãÉë=íÜ~í=~êÉ=ìëÉÇ=Äó=íÜÉ=
ãçÇìäÉ=Ñçê=ãÉíÉêáåÖ=éìêéçëÉë=ïáää=ÄÉ=
~ÇàìëíÉÇ=ïáíÜ=íÜáë=çÑÑëÉí=ÑáêëíK=cçê=íÜÉ=pQÉI=
íÜáë=áåÅäìÇÉë=ëÉííáåÖ=íÜÉ=i~ëí=mêçÖê~ããÉÇ=
qáãÉK
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=Od=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
APPENDIX B
COMPLIANCE
FCC CLASS B
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the Instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Consult Cellnet or an experienced radio technician for help.
Changes or modifications to this device not expressly approved by Cellnet
Technology, Inc. could void the user's authority to operate the equipment.
RF Exposure
In accordance with FCC requirements of human exposure to radio frequency
fields, the radiating element shall be installed such that a minimum separation
distance of 20 centimeters will be maintained.
`ÉääåÉí=i~åÇáë=H=dóê==pQÉ=Od=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
_JN
`çãéäá~åÅÉ
INDUSTRY CANADA
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that permitted for successful communication.
This device has been designed to operate with an antenna having a maximum
gain of 2 dBi. Antennas with a gain greater than 2 dBi are strictly prohibited for
use with this device. The required antenna impedance is 50 ohms.
Cet appareillage numérique de la classe B répond à toutes les exigences de
lʹinterférence canadienne causant des règlements dʹéquipement. Lʹopération est
sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer
lʹinterférence nocive, et (2) ce dispositif doit accepter nʹimporte quelle interférence
reçue, y compris lʹinterférence qui peut causer lʹopération peu désirée.
Pour réduire le risque dʹinterférer avec dʹautres utilisateurs, le type dʹantenne et
son gain doivent être choisis de telle sorte que la Puissance Isotrope Rayonnée
Equivalente (P.I.R.E) ne soit pas supérieure à celle autorisée pour une
communication réussie.
Cet appareil a été conçu pour opérer avec des antenne ayant un gain maximum
de 2dBi. Les antennes n’ayant pas un gain supérieur à 2 dBi sont strictement
interdites pour une utilisation avec cet appareil. Lʹimpédance dʹantenne requise
est de 50 ohms.
_JO
`ÉääåÉí=i~åÇáë=H=dóê==pQÉ=Od=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
GLOSSARY
ANSI
The American National Standards Institute (ANSI) coordinates the
development and use of voluntary consensus standards in the United
States and represents the needs and views of U.S. stakeholders in
standardization forums around the globe. http://www.ansi.org/
C&I
Commercial & Industrial meters, usually solid state meters with
demand notes.
Concentrator
Device that collects data and events from radio frequency local area
network (RF LAN) devices for storage in the object database;
communicates with the TOP to forward the metering data.
DCW
A Device Control Word (DCW) is a not actually a word, but a program
written in the UtiliNet programming language. DCWs execute within
UtiliNet devices and provide the ability to control the device. The DCW
sits on top of the firmware and directs the radio to do things such as
reboot or perform advanced functions.
Demand
Meter rate.
EEPROM
Electrically Erasable Programmable Read‐Only Memory
Host
The UtiliNet Network reports data to UtiliNet Solution Center software,
which hosts the data and the tools to communicate remotesly with the
radio.
Init Poll
The first time the host requests data from an module, it is the
Inititalization Poll (Init Poll). Configurable options, such as enhanced
Restoration verification, may be set at this time.
LAN
Local Area Network, consists of modules and RF link between
endpoints and gathering devices such as Concentrators and TOPs
Meter Forms
Network Concentrator
See Concentrator.
NVRAM
Non Volatile Random Access Memory
On Request Read
Operations Center DataBase. Endpoint Management system that reports
to network, exchanges information with the utility.
Outage
Over the Air, versus a direct or indirect (router) serial cable connection.
RAM
Random Access Memory
Restoration
Time Synchronization
TOP
Take Out Point
TOU
Time of Use. Specific meter rate where the usage is captured in intervals.
Utilinet IWR
Integrated WAN Radio. Used to communicate remotely to network.
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
dJN
däçëë~êó
WAN
dJO
Wide Area Network, consists of data gathering devices like
Concentrators and endpoints
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
INDEX
fåÇÉñ
NUMERICS
NJï~ó
OJï~ó
íÉÅÜåáÅ~ä=ëìééçêí
qlm NJN
NJN
NJN
mJO
^jf NJN
^kpf=`NOKOM NJP
~åíÉåå~ NJP
^ìíçã~íÉÇ NJN
^ìíçã~íÉÇ=jÉíÉê=fåÑê~ëíêìÅíìêÉ
ríáäákÉí=jçÇìäÉ=`çåÑáÖìê~íáçå
ríáäákÉí=pçäìíáçå=`ÉåíÉê NJO
OJP
NJN
t^k NJN
táÇÉ=^êÉ~=kÉíïçêâ
NJN
`Cf OJP
`ÉääåÉí=âáí=åìãÄÉê NJP
`ÉääåÉí=i^k=fa NJP
`ÉääåÉí=kÉíïçêâ NJN
`ÉääåÉí=qÉÅÜåáÅ~ä=pìééçêí mJO
`ÉääåÉí=ríáäáíó=jÉíÉê=fa NJP
ÅçåÅÉåíê~íçê NJN
bêêçê=ãÉëë~ÖÉë
mJO
c``=J=`co=m~êí=NRKOQT
c``=fa NJP
NJQ
fåÇìëíêáÉ=`~å~Ç~
NJP
iHd=NNPOmêçÖ NJO
ä~ÄÉäë NJP
i^k NJN
içÅ~ä=^êÉ~=kÉíïçêâ NJN
jçÇìäÉ
NJO
kÉíïçêâ=`çåÑáÖìê~íáçå=j~å~ÖÉê
NJO
mìÄäáÅ~íáçå=åìãÄÉê
mJP
o~Çáç=cêÉèìÉåÅó
o~ÇáçpÜçé NJO
êÉéÉ~íÉê NJN
oÉëáÇÉåíá~ä OJP
oc NJN
NJN
q~âÉ=lìí=mçáåí
NJN
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
fJN
fåÇÉñ
fJO
`ÉääåÉí=i~åÇáë=H=dóê=pQÉ=dÉå=ff=ríáäákÉí=jçÇìäÉ=qÉÅÜåáÅ~ä=oÉÑÉêÉåÅÉ=dìáÇÉ
Reader’s Comment Form
Cellnet Landis + Gyr S4e 2G UtiliNet Module Technical Reference Guide (HW‐0070‐GB‐
05.07)
Please use this form only to identify publication errors or to request changes in publications. Your
comments assist us in improving our publications. Direct any requests for additional publications,
technical questions about systems, changes in support, and so on, to your Cellnet sales representative. You
must use this form to communicate your comments about this publication, its organization, or subject
matter, with the understanding that we may use or distribute whatever information you supply in any
way we believe appropriate without incurring any obligation to you.
You can send comments via email, conventional mail, or fax.
To send your comments via...
Use this contact information...
bã~áä
ÅìëíçãÉêëìééçêí]ÅÉääåÉíKÅçã
`çåîÉåíáçå~ä=ã~áä
`ÉääåÉíI=PMMMM=jáää=`êÉÉâ=^îÉKI=pìáíÉ=NMMI=^äéÜ~êÉíí~I=d^=PMMOO
c~ñ
ESTUF=ORUJNRRM
If your comment does not need a reply (for example, pointing out a typing error), check this box and
do not include your name and address below. If your comment is applicable, we will include it in the
next revision of the manual.
If you would like a reply, check this box. Be sure to print your name and address below.
Page
Comments
(Please print.)
Date
Company Name
Your Name
Mailing Address
Phone No.
Email
cçäÇ=eÉêÉ
Cellnet
Attn.: Technical Documentation
30000 Mill Creek Ave.
Suite 100
Alpharetta, GA 30022
cçäÇ=eÉêÉ

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 31
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:4f1a78d5-a4e8-4f46-b516-d31bb734d4a1
Modify Date                     : 2007:08:07 14:34:52-04:00
Create Date                     : 2007:08:07 14:34:50-04:00
Metadata Date                   : 2007:08:07 14:34:52-04:00
Document ID                     : uuid:cb902f3e-2f4a-41c8-8319-23a6d8137503
Format                          : application/pdf
Creator                         : Adobe Acrobat 6.0
Producer                        : Adobe Acrobat 6.0

EXIF Metadata provided by EXIF.tools