Landis Gyr Technology EG1R1S2 Gridstream RF Enhanced Integrated Focus AX Meter User Manual Manual Cover

Landis+Gyr Technology, Inc. Gridstream RF Enhanced Integrated Focus AX Meter Manual Cover

Manual

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: R7PEG1R1S2 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0207.W06 Manufacturer: Cellnet Technology Inc. Model: Gridstream RF Enhanced Integrated Focus AX Manual
LANDIS+GYR CONFIDENTIAL INFORMATIONGridstream RFEnhanced IntegratedFOCUS AXQuick Start GuidePublication: 98-1033 Rev AB
Limitation on Warranties and LiabilityInformation in this document is subject to change without notice. This manual or any part of it thereof may not be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr.In no event will Landis+Gyr be liable for any incidental, indirect, special, or consequential damages (including lost profits) arising out of or relating to this publication or the information contained in it, even if Landis+Gyr has been advised, knew, or should have known of the possibility of such damages.© 2010 Landis+Gyr, Inc. All Rights ReservedGridstream RF Enhanced Integrated FOCUS AX Quick Start Guide98-1033 Rev AARevision HistoryModification Date Revision Description Author09/15/2010 AA Released Internally Kim Utesch04/21/2011 AB Pending Kim UteschLandis+Gyr6436 County Road 11Pequot Lakes, MN 56472Website: www.landisgyr.comE-mail: solutionsupport.na@landisgyr.comTechnical Support: 1-888-390-5733Copyright© 2010 Landis+Gyr, Inc.All rights reserved.
Data Sheet 98-1033 Rev AB 3Gridstream RF Enhanced Integrated FOCUS AXQuick Start GuideOverviewThe Gridstream RF Enhanced Integrated FOCUS AX module is an integrated solution with FOCUS AX advanced metering electronics the Gridstream AMR communication electronics combined together on a single PCB. It uses field-proven Digital Multiplication Measurement Technique to ensure a highly accurate load performance and dependability during the entire life of the product. It also offers a Service Disconnect option and ZigBee connectivity for HAN applications.Figure 1. Gridstream RF Enhanced Integrated FOCUS AX moduleand the Landis+Gyr FOCUS AX meterThis communication module is not available as a stand alone product. To order a Gridstream RF Enhanced Integrated FOCUS AX endpoint, the Landis+Gyr kit number is 40-1284 (with ZigBee).Required SoftwareTo work with the endpoint, you need one of the following software tools:•Command Center version 5.0 or later•RadioShop version 5.0 or later•Endpoint Testing Manager version 4.0 or later
Gridstream RF Enhanced Integrated FOCUS AX Quick Start Guide Landis+Gyr4 98-1033 Rev AB Data SheetAbout the LAN IDThe LAN ID is a unique identifier for each Gridstream RF endpoint. It is always displayed in hex. Landis+Gyr provides the LAN address. You cannot change the LAN ID of a radio.HAN SupportThe Gridstream RF Enhanced Integrated FOCUS AX communication module supports an integrated ZigBee system on the chip. This enables the endpoint to communicate via Smart Energy Profile 1.0 with other ZigBee enabled devices.Endpoint Registration with Command CenterCommunication module firmware version 6.x or later and module Device Control Word (DCW) 1A01.06.05 or later is required for auto-registration. After the endpoint is installed in the field it will automatically register with the Head End System. No special tools are needed during installation as the normal Utility meter swap process can be utilized. The meter automatically sends in the registration information containing items on how the meter/endpoint is configured so the host can properly interpret the incoming data. Some of the items contained in this are as follows:•Default collector/destination•Reporting interval for Register Data•Reporting interval for Interval Data•Meter's AMR-level security password•Time Synchronization parameters•GMT offset•Periodic Register Data reporting•Periodic LP Data reporting•Meter configuration informationOnce this information has been sent the endpoint starts collecting and sending based on the default configuration loaded during manufacturing.Retrieving DataThe endpoint is capable of delivering data via an On Request Read (ORR) or autonomously (periodically reported). Availability of the following features depends on meter configuration. On Request Reads (ORR) available with this endpoint are:•Register Data (Standard Table 23) which includes consumption, demand and TOU values•Load Profile or Interval Data (Standard Table 64)•Revenue Integrity Services which includes instantaneous measurements related to line voltage, current and phase angle
Landis+Gyr Gridstream RF Enhanced Integrated FOCUS AX Quick Start GuideData Sheet 98-1033 Rev AB 5Availability of the following features depends on meter configuration. Options for periodic reported data with this module include:•Register Data & Status Flags (Standard Tables 23 & 3) which includes consumption, demand, TOU values and meter status•Load Profile or Interval Data & Status Flags (Standard Tables 64 & 3) which includes interval data and meter statusDemand ResetWhen the Command Center Host delivers a Demand Reset command, the communication module passes the command to the meter, which performs the Demand Reset on the meter. The endpoint then passes the previous demand data captured by the meter (Standard Table 25) to the Host for processing.Time SynchronizationTime synchronization is the process of keeping the meter time synchronized with the Gridsteam RF network time within a configurable limit. The communication module automatically keeps its time synchronized with the Gridstream RF network via periodic background process. The communication module reads the meter date/clock table (Standard Table 52) at 1:23 AM. If the time drift between meter and communication module exceeds the minimum time threshold, X, it sends a time synchronization alert message to the Host so it knows that an adjustment was made automatically for XX seconds. If the time is off by more than Y seconds, an alert is sent saying the time off exceeds allowed seconds and that further manual action will be required to correct.Power Outage/RestorationWhen an outage occurs, the meter uses an early power failure signal to alert the communication module to disconnect from the meter's power immediately. The communication module saves critical module data to non-volatile memory and creates and sends a power outage message. This message includes the following information:•LAN ID•Outage time•Reboot count.The communication module sends the message, then assists with routing other packets until the back-up energy source can no longer keep the radio alive.When power is restored, the communication module connects with the network. With network communications restored, the communication module sends a power restoration message that includes details such as: •LAN ID•Outage time•Restoration time•Reboot count.
Gridstream RF Enhanced Integrated FOCUS AX Quick Start Guide Landis+Gyr6 98-1033 Rev AB Data SheetThe communication module stores a history of up to the last five power outage and restoration event pairs in the event log. The Host can request this data.Supporting PasswordsThe endpoint supports passwords provided by the utility. See two way Endpoint Testing Manager for loading password into the communication module.Downloading Firmware The metrology, communication module and ZigBee firmware can be upgraded remotely over the network. Both the communication module and ZigBee firmware can remotely initiate a self-restart with communications enabled, if the downloaded firmware causes a catastrophic functional failure. Once the endpoint completely receives the new code, it operates with the new code. The metrology and communication module firmware are integrated and must be updated simultaneously.Encrypting DataThe Gridstream RF network currently supports use of one encryption key per network. If you enable the FOCUS AX with encryption, the host must have a matching encryption key. Configuration TablesThe Gridstream RF Communication Module Configuration structure passes the data to configure the endpoint. It is used for both C&I and Residential applications.This table is currently 55 bytes long. It contains information necessary to configure several services on the endpoint, such as firmware reads, autonomous data return configuration.The endpoint receives the packet, and using the data, configures its own operation. The host maintains a record of the endpoint’s configuration.Item General DescriptionPacket Contents Identifies which elements in this packet are set. Elements that are not set are ignored. There still must be a place in the packet for it, though.Config Byte 1 Not used.Config Byte 2 Not used.Config Byte 3 Not used.Config Byte 4 Not used.Config Byte 5 Not used.Reporting Interval LP In Minutes. Pump Period Register In Minutes. Pump Period RIS Not used.Pump Period Status Not used.
Landis+Gyr Gridstream RF Enhanced Integrated FOCUS AX Quick Start GuideData Sheet 98-1033 Rev AB 7TroubleshootingContact Landis+Gyr Customer Support at solutionsupport.na@landisgyr.com or call 888-390-5733 with any questions or problems, and they will guide you through the troubleshooting process.Shock HazardBeware of hazardous electrical voltages. Do not touch the board or any external connections, such as the antenna, when the meter board is powered up.ComplianceFCC Class BThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Pump Period Snap Read Not used.User ID 2 byte User ID used while running ANSI Logon ServiceLogon User 10 byte User Name that is used while running the ANSI Logon ServiceSecurity Password The full 20 bytes are required for the FOCUS AX. Sustained Outage DurationDefines the number of seconds after which an outage will be classified as sustained. If less than this amount, the outage is momentary. A value of zero will cause all outages to be considered "sustained". Max Meter Time Drift The number of seconds that the meter clock can drift from the radio clock, after which an alarm is triggered.Meter Time Read Period The period at which the module checks the time in the meter. In SecondsGMT OffsetThe GMT Offset in 15 minute increments. Signed.Valid values are -128 (0x80), corresponding to GMT-32hours to +127 (0x7F), corresponding to GMT+ 31hours Item General Description
Gridstream RF Enhanced Integrated FOCUS AX Quick Start Guide Landis+Gyr8 98-1033 Rev AB Data Sheetinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Consult Landis+Gyr or an experienced radio technician for helpUWARNING: Changes or modifications to this device not expressly approved by Landis+Gyr could void the user's authority to operate the equipment.RF Exposure In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element shall be installed such that a minimum separation distance of 20 centimeters will be maintained. SpecificationsCategory Specification Value or RangeCompatible MetersLandis+Gyr FOCUS Supported Meter FormsForm Class Voltage Units1S&SD CL100 120 Vac2S&SD CL200 240 Vac2SE CL320 240 Vac3S CL20 120 Vac3S CL20 240 Vac4S CL20 240 VacOnly 1S and 2S are available with Service DisconnectGridstream Radio GeneralRF Frequency Range 902.2 MHz Min, 927.9 MHz MaxRF Baud Rate 9.6 kbps Min, 115.2 kbps Max, ProgrammableOutput Power 25.25 kBm Min, 26.25 dBm Typ, 27.25 dBm Max. Over temperature range, <2:1 VSWR loadReceive Sensitivity -112 dBm Min, -102 dBm Max, At 10% PER, depends on baud rateAntenna Type Inverted F, PrintedAntenna Gain +3 dbi, Peak Gain
Landis+Gyr Gridstream RF Enhanced Integrated FOCUS AX Quick Start GuideData Sheet 98-1033 Rev AB 9ZigBee Radio GeneralRF Frequency Range 2.405 GHz Min, 2.475 GHz MaxRF Baud Rate 250 kbps TypOutput Power 17 dBm Min, 20 dBm Typ, 21 dBm Max, <2:1 VSWR load, approx.Receive Sensitivity -106 dBm Min, -104.5 dBm Typ, -102 dBm Max. At 1% PERAntenna type Inverted F, PrintedAngenna Gain +5 dBi, Peak GainStandards ComplianceFCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl. intentional radiators)IEC 61000 4-2,3,4,5, 6, 8, 9, 11 Electromagnetic CompatibilityANSI C12.20 National Standard for Electricity Meters - 0.2 and 0.5 Accuracy ClassesANSI C12.1 Code for Electricity Metering ANSI C37.90.1 (1989) Standard Surge Withstand Capability (SWC) TestsMechanicalSize 5.5” L x 5.0” W x 1.5” HWeight 48.2 gEnvironmentalStorage Temperature -40 to +85 COperating Temperature -40 to +85 C (under meter cover)Relative Humidity 5 to 95% relative humidity, non-condensingCategory Specification Value or Range

Navigation menu