Landis Gyr Technology FTAR2S1 Communications Adapter User Manual 15 0159 Exhibit Cover
Landis+Gyr Technology, Inc. Communications Adapter 15 0159 Exhibit Cover
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2673870 |
| Application ID | So1Wz06MQd0O3zKy0yfbuQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 29.15kB (364408 bits) |
| Date Submitted | 2015-07-09 00:00:00 |
| Date Available | 2015-07-09 00:00:00 |
| Creation Date | 2015-06-29 15:34:34 |
| Producing Software | ScanSoft PDF Create! 7 |
| Document Lastmod | 2015-06-29 15:35:17 |
| Document Title | Microsoft Word - 15-0159 - Exhibit Cover.doc |
| Document Creator | Microsoft Word - 15-0159 - Exhibit Cover.doc |
| Document Author: | courtney.mcgann |
Certification Exhibit FCC ID: R7PFTAR2S1 IC: 5294A-FTAR1S1 FCC Rule Part: 15.247, 15.249 IC Radio Standards Specification: RSS-210, RSS-247 ACS Project Number: 15-0159 Manufacturer: Landis+Gyr Technology, Inc. Model: Communications Adapter 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Communications Adapter Quick Start Guide Publication: 98-1544 Rev AB LANDIS+GYR CONFIDENTIAL INFORMATION Limitation on Warranties and Liability Information in this document is subject to change without notice. This manual or any part of it thereof may not be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr. In no event will Landis+Gyr be liable for any incidental, indirect, special, or consequential damages (including lost profits) arising out of or relating to this publication or the information contained in it, even if Landis+Gyr has been advised, knew, or should have known of the possibility of such damages. © 2015 Landis+Gyr, Inc. All Rights Reserved Communications Adapter Quick Start Guide Publication: 98-1544 Rev AB Revision History Modification Date Revision Description Author 6/28/2015 AB Released - Removed references to Field Tool Adapter Vicky Costello 6/4/2015 AA Released Vicky Costello © 2015 Landis+Gyr All rights reserved. Communications Adapter Quick Start Guide Product Description The Communications Adapter is a lightweight, compact device that is designed to ensure comfortable carrying and holding by the tool user. The adapter tool is capable of decoding one-way and two-way networks in a Gridstream environment. The device also incorporates a bluetooth module that provides communication to the tool device (tablet or laptop) and eliminates the need for serial cable connection. Two-way communication with the adapter provides the capability to transmit and receive data from AMI endpoints. One-way communication operates in a listener mode and provides ability to decode packets from AMR devices including gas and water modules. Battery Level Indicator Bluetooth Connection Two-way and One-way Activity Power On and Off Button Module Reset Comm Adapter’s LAN ID Figure 1. Communications Adapter Quick Start Guide 98-1544 Rev AB Communications Adapter Quick Start Guide Landis+Gyr NOTE: The LAN ID is a unique identifier for each endpoint. It always displays in hex. Landis+Gyr provides the LAN address. You cannot change the LAN ID of a radio. NOTE: The device was designed to operate at close range in order to minimize interference from unwanted readings while troubleshooting in the field. 98-1544 Rev AB Quick Start Guide Landis+Gyr Communications Adapter Quick Start Guide The Communications Adapter kit includes a battery charger. Figure 2. Communications Adapter Kit Required Software For specific software and firmware questions, contact your Program/Project Manager directly or your Customer Account Representative. Quick Start Guide 98-1544 Rev AB Communications Adapter Quick Start Guide Landis+Gyr Getting Started To establish communication with the Communications Adapter, perform the following steps: 1. Press and hold the power button on the right-hand side to turn the adapter on. 2. Establish bluetooth communication with the tablet/laptop: A. From the Devices and Printers tab, locate or show the bluetooth devices. A list of bluetooth devices is displayed. B. Select Add a Device to choose the device that corresponds to Gridstream followed by the LAN ID printed on the back of the Communications Adapter. C. Enter PIN (0000) to add the device. D. Double-click the device once it is added to the Show Devices tab. E. Click the Hardware tab to obtain the COM port number that is used to set up communication with the software tools (COM port). Once the bluetooth is successfully paired/connected, the Communications Adapter’s Bluetooth Active LED will illuminate. General Usage The Communications Adapter provides field technicians with full mobility to perform field tool related activities at the site location of the endpoint. Once the tool software is activated, the Communications Adapter is ready to receive information from an electric, gas, or water meter. Oneway communication is initiated by the swipe of a magnet to the unit being interrogated. Two-way communication occurs when the Communication Adapter requests information from the unit being interrogated. General Specification Communications Adapter Specifications Table 1. Product Specification Element Description Battery Life Normal use is 10 hours. The battery charge level is indicated on the front of the device. To view battery and charging status: - Green indicates the battery is fully charged. - Yellow indicates the battery is half charged. - Red indicates the battery is low and needs charging. RF Output Power 10 milliwatts for close range connection One-Way Reception Range 0 to 8 feet from water or gas meter LED 1 Green for One-Way and Two-Way (displayed on front of device) 1 Blue for Bluetooth active connection 98-1544 Rev AB Quick Start Guide Landis+Gyr Communications Adapter Quick Start Guide FCC Compliance Information Compliance for Class B Devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this device not expressly approved by Landis+Gyr could void the user’s authority to operate the equipment. Portable Device RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statements Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Quick Start Guide 98-1544 Rev AB Communications Adapter Quick Start Guide Landis+Gyr Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. FCC & IC FCC ID: R7PFTAR2S1 IC: 5294A-FTAR1S1 For the Bluetooth module: Contains FCC ID: ED9LMX9838 Contains IC: 1520A-LMX9838 Model: Communications Adapter FCC Two Part Statement Label The FCC label can be located on the back of the Communications Adapter. Figure 3. FCC Two Part Statement Label 98-1544 Rev AB Quick Start Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Print high-res Page Count : 9 XMP Toolkit : 3.1-701 Producer : ScanSoft PDF Create! 7 Creator Tool : Microsoft Word - 15-0159 - Exhibit Cover.doc Create Date : 2015:06:29 15:34:34-04:00 Modify Date : 2015:06:29 15:35:17-04:00 Title : Microsoft Word - 15-0159 - Exhibit Cover.doc Creator : courtney.mcgann Author : courtney.mcgannEXIF Metadata provided by EXIF.tools