Landis Gyr Technology NG0R1S3 Series 5 Single Board Radio User Manual Series V SBR Data Sheet

Download:
Mirror Download [FCC.gov]
Document ID	4113519
Application ID	MsILf3calkg4m1E9W/pTTw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	106.77kB (1334619 bits)
Date Submitted	2018-12-21 00:00:00
Date Available	2018-12-21 00:00:00
Creation Date	2018-12-19 11:48:22
Producing Software	Acrobat Distiller 15.0 (Windows)
Document Lastmod	2018-12-19 11:59:01
Document Title	Series V SBR Data Sheet.book
Document Creator	FrameMaker 2015.1
Document Author:	MahajaAm

20
Network Node
Data Sheet
ev
ie
ra
ft
12
/1
9/
Publication: 98-1837 Rev AF
LANDIS+GYR CONFIDENTIAL INFORMATION
Limitation on Warranties and Liability
Information in this document is subject to change without notice. This manual or any part of it thereof may not
be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr.
In no event will Landis+Gyr be liable for any incidental, indirect, special, or consequential damages (including
lost profits) arising out of or relating to this publication or the information contained in it, even if Landis+Gyr
has been advised, knew, or should have known of the possibility of such damages.
20
© 2018 Landis+Gyr, Inc. All Rights Reserved
ft
12
/1
9/
Covered by both issued and pending patents.
For further patent information see: https://www.landisgyr.com/about/patent-notices/
Network Node Data Sheet
Publication: 98-1837 Rev AF
Revision History
Revision
Description
Author
12/19/2018
AE
Published
Amit Mahajan
4/26/2018
AD
Published
Amit Mahajan
2/28/2017
AC
Published
Amit Mahajan
Published
Amit Mahajan
6/27/2016
ra
Modification Date
AB
© 2018 Landis+Gyr | All rights reserved.
Contact Us:
1-888-390-5733
ie
Landis+Gyr technical support:
ev
solutionsupport.na@landisgyr.com
To provide feedback about this documentation, contact the Technical Documentation team at:
ustechnicaldocumentation@landisgyr.com.
Network Node
Data Sheet
Introduction
20
The Network Node is a fully functional radio that can be deeply integrated into sensor and
controller products allowing a wide range of devices to communicate over the RF network.
After integration, the product functions as an endpoint on the RF mesh network and will
route network traffic, further strengthening the network.
ev
ie
ra
ft
12
/1
9/
There are two models of Network Node namely N500 and N550. The N500 operates on RF
Mesh networks while the N550 is utilized on RF Mesh IP networks
Figure 1. Network Node
Data Sheet
98-1837 Rev AF
Network Node Data Sheet
Landis+Gyr
All parameters specified at 25°C unless specified otherwise.
Table 1. Network Node Specifications
Parameter
Target
Condition
Min
Typical
Max
Units
Notes
Power Supply
Rx mode
70
90
Tx mode (low
power)
200
250
Tx mode (medium
power)
250
330
Tx mode (high
power)
600
750
General
Processor Type
RAM (internal)
Flash (internal)
Additional Memory
mA
SAM4C
Clock Ref
Processor
VDC
ft
12
/1
9/
Current Consumption
5.0
4.0
20
Input Voltage
Ext. Serial Flash
MHz
304
Kbyte
Mbyte
Mbyte
902.2
927.8
ra
Frequency Range
120
9.6
ie
Supported Data Rates
ev
RF Mesh IP (N550)
Modulation Type
No. of channels
19.2
RF Mesh (N500)
38.4
115.2
kbps
50
150
200
2-FSK/2-GFSK
Narrow channel
mode
240
Wide channel
mode
86
Ultra wide channel
mode
51
Operating mode
#1, #2 and #3
64
Based on the
operating mode
RF Mesh
RF Mesh IP
Transmitter
98-1837 Rev AF
Data Sheet
Landis+Gyr
Network Node Data Sheet
Table 1. Network Node Specifications(Continued)
Output power
Output power over
temperature
Adjacent channel power
Min
Typical
Max
Low power
16
17
18
Med power
21
22
23
High power #
26.5
28
28.8
Low power
14
19
Med power
19
24
High power #
25
28.8
Relative to
designed channel
-30
-25
-114
-112
-110
-112
-110
-108
-110
-108
-106
-102
-100
-98
-96
-94
-92
-107
-105
-103
-99
-97
-95
-98
-96
-94
Receiver
19.2 kbps
38.4 kbps
115.2 kbps
Rx Sensitivity
300 kbps
50 kbps
ra
150 kbps
200 kbps
Notes
dBm
<2:1
VSWR load, +25C
dBm
Over temperature
range, <2:1
VSWR load
dBc
ft
12
/1
9/
9.6 kbps
Units
Target
Condition
20
Parameter
dBm
variation from
nominal over temp
range
-3
dB
Sensitivity over
Frequency Band
variation across
the frequency band
-2
dB
worst case data
rate and channel
spacing
30
dB
worst case data
rate and channel
spacing
35
dB
+/- 10MHz
60
dB
no damage
10
valid detection
(>65% PSR)
ie
ev
Adjacent channel
rejection
Sensitivity over Temp
Alternate channel
rejection
Out-of-band blocking
Max input signal
15
90% Packet success
rate
dBm
dBm
Environmental
Storage Temperature
-40
+85
°C
Operating Temperature
-40
+85
°C
Relative Humidity
85
Data Sheet
98-1837 Rev AF
Non-condensing
Network Node Data Sheet
Landis+Gyr
ra
ft
12
/1
9/
20
Network Node Dimensions
Figure 2. Top Side View
Board Thickness .060”
ie
Height Representation: (Unless Otherwise Noted)
Top Side: 0.208” Max
ev
•
•
Bottom Side: 0.095” Max
Tooling Holes
98-1837 Rev AF
Data Sheet
Network Node Data Sheet
ra
ft
12
/1
9/
20
Landis+Gyr
Figure 3. Bottom Side View
Unless otherwise specified: Dimensions are in Inches [MM]
Dimensions are after finish is applied
Angle tolerance does not apply to implied 90 degree angles
ie
Tolerance on:
Decimal
•
Fraction
•
Agles
•
1PL +.1
•
+ 1/64
•
+ 1°
•
2PL +.2
•
•
•
3PL +.005
•
•
ev
•
Must be free from Flash and Burrs
Break all sharp edges
() Denotes Preference Only
Data Sheet
98-1837 Rev AF
Network Node Data Sheet
Landis+Gyr
FCC, Industry Canada Compliance, and Regulatory Compliance
Brazil
FCC Class B
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference that may
cause undesired operation.
•
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Consult Landis+Gyr or an experienced radio technician for help.
ra
WARNING: Changes or modifications to this device not expressly approved by Landis+Gyr
could void the user’s authority to operate the equipment.
ft
12
/1
9/
20
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the Instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
RF Exposure
ev
ie
This equipment complies with FCC and ISED Canada radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated with minimum distance 22 cm between the radiator and your body. This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites FCC/ISED Canada d’exposition aux radiations
définies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé à une distance minimale de 22cm entre le radiateur et votre corps.
Cet émetteur ne doit pas être co-implantés ou exploités en conjonction avec une autre
antenne ou émetteur.
Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
98-1837 Rev AF
Data Sheet
Landis+Gyr
Network Node Data Sheet
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
This radio transmitter (5294A-NG0R1S3) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required
antenna impedance for each antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
20
Approved Antennas:
Landis+Gyr P/N 106119-000 Whip, 5.5dBi, 50 ohms
•
PIFA (-3dBi) associated with Landis+Gyr Streetlight Controller: Certified for use
ONLY in Landis+Gyr Streetlight Controller models 26-2494-1011
•
26-2498-2011, and PIFA (+3dBi) associated with Landis+Gyr S710 Line Sensor:
Certified for use ONLY in Landis+Gyr Line Sensor model S710
ft
12
/1
9/
•
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
ra
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de
sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
ev
ie
Le présent émetteur radio (5294A-NG0R1S3) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non
inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Anatel
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Host FCC Label Requirement
In the final installation, the following information must be visible:
Data Sheet
•
Contains FCC ID: R7PNG0R1S3
•
Contains IC: 5294A-NG0R1S3
•
Model: Network Node N500/N550
98-1837 Rev AF
Network Node Data Sheet
Landis+Gyr
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may
cause undesired operation.
ev
ie
ra
ft
12
/1
9/
20
•
10
98-1837 Rev AF
Data Sheet

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : MahajaAm
Title                           : Series V SBR Data Sheet.book
Create Date                     : 2018:12:19 11:48:22Z
Creator Tool                    : FrameMaker 2015.1
Modify Date                     : 2018:12:19 11:59:01+05:30
Metadata Date                   : 2018:12:19 11:59:01+05:30
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:03df4769-b325-4d0b-b801-6cdb550c6a23
Instance ID                     : uuid:f4cbc203-5c99-4b5a-88b8-3967d2cae3b2
Page Mode                       : UseOutlines
Page Count                      : 10
Author                          : MahajaAm

EXIF Metadata provided by EXIF.tools