Latitude 796 BLE Analog Watch User Manual ART14 0274 BLE ANALOG WATCH Manual indd
Latitude Limited BLE Analog Watch ART14 0274 BLE ANALOG WATCH Manual indd
Latitude >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2604993 |
| Application ID | xi2pEMq4F/2o4JSlK+ZDpA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 94.13kB (1176664 bits) |
| Date Submitted | 2015-05-05 00:00:00 |
| Date Available | 2015-05-05 00:00:00 |
| Creation Date | 2017-11-12 11:59:02 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-12 11:59:02 |
| Document Title | ART14 – 0274-BLE ANALOG WATCH Manual.indd |
| Document Creator | Adobe InDesign CS6 (Windows) |
Ana-Digit Smart Watch Instruction Manual FCC Statement FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. 1.0 Introduction Thank you for your purchase of the Ana-Digit Smart Watch. With this watch, you can monitor your daily activities, incoming / missed call, email and message ! Simply put the watch on your wrist and this watch will record the number of steps taken, the distance travelled and the calorie burnt in your daily activity for your review. This product has to be used in line with an iOS devices that support Bluetooth 4.0 technology to review your daily activities. Your Ana-Digit Smart Watch is carefully designed and produced. In order to fully utilize the features of the Ana-Digit Smart Watch, it is advisable to use it in conformity with the notes mentioned below: Read this user’s manual carefully before using the Ana-Digit Smart Watch and keep this manual in a safe place for future reference. Avoid exposing the Ana-Digit Smart Watch to extreme conditions for an unreasonable time. Avoid rough use or severe impacts on the Ana-Digit Smart Watch. Keep the Ana-Digit Smart Watch away from magnets or appliances which contain magnetic components such as speakers or motors as these items may ruin the sensors. Clean the Ana-Digit Smart Watch occasionally with a soft cloth. DO NOT expose the Ana-Digit Smart Watch to strong chemicals such as gasoline and alcohol as they will damage the AnaDigit Smart Watch. DO NOT dispose of the Ana-Digit Smart Watch into fire as the battery inside the main unit may explode. WARNING! Make sure that you fully understand the functions and limitations of the Ana-Digit Smart Watch and it is NOT a professional medical device. Should you have any further questions regarding your daily life condition, please consult your doctor. 2.0 Speciications [P]: PAGING [ST]: STATUS [C]: CROWN [S]: SHUTTER [G]: GOAL Features: — BLE smartphones connectivity — LED indicators — Buzzer and vibration alerts — Activity Monitor — Personal Data Setting/Watch Configuration fully set from smartphones — Automatic Time Sync — Paging / Remote Shutter 3.0 Device pairing The following procedures guide you through the device pairing process: 1. Download the app ( Name: BLE Analog) from the App store in your deivce before use. After installing the APP, go to Setting in your iOS device and activate Bluetooth. Setting Setting Bluetooth Turn on Bluetooth Turn on 3.0 Device pairing and unpair Menu Setting Pair 2. Go to the device pairing screen in the APP : Menu Settings Device Pairing. Click the PAIR button. The APP starts scanning for matching an available device. To unpair the Ana-Digit smart watch, press the forget button in the App. Also forget the Bluetooth device in the iOS ID number 3.0 Device pairing BEEP BEEP BEEP [G]: GOAL Press and hold [G] button for 2 seconds. Pairing success 3. Press and hold [G] button for 2 seconds to start pairing, beep beep sound will be generated. When pairing are successful, beep beep beep sound will be generated. Otherwise, It will terminate the search function after 20 seconds 4.0 Time setting Analog movement Time setting can be done manually with crown or via smartphones. Note: Time setting is necessary whenever battery is changed. 4.1 Time setting with crown — — — Pull the crown out to adjust the hour and minute hands. Recommend to pull the crown when the Second hand comes to 12:00 position. Adjust the hands to a few seconds ahead of the real time Push the crown back to its normal position at the moment when the hands sync with the real time. Pull the crown out to adjust Push the crown back to running position 4.2 Time setting through Apps Menu Update Smart Watch Time Go to smart watch time setting screen in the APP: — — — — Menu Update Clock The analog time is frozen by the APP. Input the current TIME (HH:MM:SS) in the APP Press “Sync Now” button and Beep-Beep is generated. The watch hands will be advanced in fast pace to the current time automatically. — Beep-Beep-Beep is generated at the end of adjustment. Note: If the time is only a few minutes ahead of the real time, it will just stay in the current position and wait for time elapse until real time is synced. Automatic time sync: when the watch is connected to the phone, the time will automatically sync. 5.0 Notiication mode Simply press the equivalent button to switch to the desired mode. [P]: PAGING Press to find the smartphone [S]: SHUTTER Press to take snapshots [ST]: STATUS Press once to show all kinds of notification alerts if available Press and hold 2 seconds to clear all notification status [G]: GOAL Press to light up the goal progress bar for 3 seconds Press and hold 2 seconds to start pairing Note: Alert mode. Shows all kinds of notification alerts when available. Different notification status indication methods will be discussed in the Notification mode section later. 5.0 Notiication mode When new notification comes, smartwatch responds with 3 types of alerts: — LED ( Slow - Fast ) — Buzzer Sound ( Single beep - Multiple beep ) — Vibration ( Weak - Strong ) Different notification can be customized by one of it or all three types of alerts. In-coming call and missed call alerts Link lost alert If the Bluetooth link is broken, most likely the phone and watch are too far apart. Email Notiication alert Assorted Message Notiication alert SMS and notifications from a few message APPs such as Twitter, Whatapps, LINE, … can be grouped into the same Message alert. 5.1 Notiication mode - Smartphone Notiication Alerts Starting from iOS 7.0 all notifications conceived by iPhones can be directed to Bluetooth 4.0 (or BLE) devices e.g. smartwatches, wristbands. To do that users have to enable the PopUp alerts for dedicated APP: Settings Notification Center Specify apps (e.g. Phone, Email, Message, WhatsApp etc) Select “Alert” option. See screen shots below: Setting Notification Center On the Alert 6.0 Activity Goal Mode 80~99% of target goal completed 60~79% of target goal completed 40~59% of target goal completed 20~39% of target goal completed [G]: GOAL 0~19% of target goal completed Watch has built-in 3-axis accelerometer sensor which monitors and records your physical activity 24/7. One of the 4 types (Steps, Distance, Calorie and Active time) daily goal can be selected and display on the watch. Target setting for each goal is also customizable. Press [G] button to show the % of the completed target goal. Note: Personal data such as Birthday, Gender, Height and Weight have to be input to the APP in order to get more accurate estimation of distance and calories burnt. 7.0 Find Phone / Watch [P]: Paging The LED ( ) flashes in this mode. Find Phone: Press [P] pages the smartphones iOS device will be alerted page watch Find Watch: Go to the page watch menu in the App, click the page button Smart watch will be alerted. 8.0 Remote Shutter [S]: Shutter Remote Shutter: Work as remote shutter control button. Bring the APP to foreground press [S] button in watch to activate the photo taken screen. Press [S] button take a snapshot and It will be saved into the smartphone’s album. 9.0 Battery charging The Ana-digit Smartwatch is supplied with an external “Charger” device, which allows you to charge your watch anytime and everywhere by simply connecting the Charger to a USB port or an external 5V Power pack. The SmartWatch has an integrated low-battery indication. If the watch is in low-battery condition, the LED icons and will flash for 3 times alternately to alert you when any push button is activated. Whenever your Smartwatchshows an low and critical battery level please proceed as follows. 1. Connect your Charger to any USB port or a 5V Power pack. 2. Turn your watch and place the Charger flat and firmly on the case back of your SmartWatch. 3. Make sure that the pins on the charger are matching the notches on the watch case back. 4. During charging, the LED at 8H will be turned on. After fully charged, the LED at 8H will be turned off and LED at 11H will be turned on. YourSmartWatch starts to charge and will stop automatically as soon as the battery is fully charged.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:11:28 18:42:36+08:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2015:05:05 14:04:24-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Adobe PDF Library 10.0.1 Trapped : False GTS PDFX Conformance : PDF/X-1a:2001 Metadata Date : 2015:05:05 14:04:24-07:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:b20bd131-d6ee-4604-b741-35fa99a0e834 Original Document ID : xmp.did:79842F272571E411BDB0F57764FE1B89 Document ID : xmp.id:3C9340FDE976E411A1BEB77AEFE360F2 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:3B9340FDE976E411A1BEB77AEFE360F2 Derived From Document ID : xmp.did:7F842F272571E411BDB0F57764FE1B89 Derived From Original Document ID: xmp.did:79842F272571E411BDB0F57764FE1B89 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:11:28 18:42:36+08:00 Format : application/pdf Title : ART14 – 0274-BLE ANALOG WATCH Manual.indd GTS PDFX Version : PDF/X-1:2001 Page Count : 16EXIF Metadata provided by EXIF.tools