Latitude 833 OLED Wrist band with Optical HR User Manual Instruction manual with FCC

Latitude Limited OLED Wrist band with Optical HR Instruction manual with FCC

UserManual.wiki >

833 User Manual

Users Manual

150 MM 150 MM 140 MM 138 MM75 MMINSIDE PAGESCOVERBACKCOVERPrepared by : Verified by :Approved by :APN ref. no : B05140Date : 06-03-2017Vendor ref : no. of color : COVER: 4C(CMYK) + 1C(BLACK)INSIDE PAGES: 1C + 1C(BLACK)B&W artwork attached : Presentation □ Testing □ Production/Shipment □Inside pagesCover

DCBA243172658456Package contents⁄device parts1Band, ×22Display module, removable3Display (OLED display)4Menu button5Clip6USB charger7Reset button8Optical sensor

7Try it out nowJust scan the QR code with your smartphone and find out more about the ALDI product you have purchased.Depending on your tariff plan you may be charged for the connection.QR Codes

General information8General informationReading and storing the user manualThis user manual accompanies the wireless activity tracker (referred to below only as the “wristband”). It contains important information on start-up and use.Before using the wristband, read the user manual carefully. This particularly applies to the safety instructions. Failure to follow this user manual may result in severe injury or damage to the wristband. The user manual is based on the standards and rules in force in the European Union. When abroad, you must also observe country-specific guidelines and laws.Store the user manual for future use. Make sure to include this user manual when passing the wristband on to third parties.

General information9Explanation of symbolsThe following symbols and signal words are used in this user manual, on the wristband or on the packaging. WARNING!This signal symbol/word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided.CAUTION!This signal symbol/word designates a hazard with low risk that, if not avoided, may result in minor or moderate injury.NOTICE! This signal word warns against potential damages to property.

Safety11SafetyProper useThe wristband is exclusively designed for recording your activity and sleeping habits and for exchanging data with smartphones and tablets. It is designed for collecting data for analysis with the Crane Connect app. You can use this data to help you reach your goals in terms of fitness, level of activity and sleep. The wristband is only intended for private use and is not suitable for commercial, therapeutic or medical applications. It is not a children’s toy or a medical device. Only use the wristband as described in this user manual. Any other use is deemed improper and may result in damage to property or even personal injury.The manufacturer or vendor accepts no liability for damage caused by improper or incorrect use.

Safety12Safety instructions WARNING!Danger of suffocation!Small children or animals may choke on the display module if swallowed. − If the display module is swallowed by children or animals, contact a physician immediately. − Keep the display module away from children and animals. WARNING!Risk of injury!Incorrect operation may result in severe injury.

Safety13 − If you have a pacemaker, be absolutely sure to ask your physician before using the wristband for the first time. WARNING!Danger of explosion!Rechargeable batteries may explode if they are excessively heated up. − Do not heat up the display module. − Keep the wristband away from hot surfaces. − Do not throw the display module in an open fire. − Protect the display module from direct sunlight. − Do not charge the rechargeable battery in the direct vicinity of hot surfaces or objects.

Safety14 WARNING!Danger for children and persons with impaired physical, sensory or men-tal capacities (e.g. partially disabled persons, older persons with reduced physical and mental capacities) or lack of experience and knowledge (e.g. older children). − This wristband may be used by children ages eight and over as well as persons with impaired physical, sensory or mental capacities or those lacking experience and knowledge if they are supervised or have been instructed in how to safely use the wristband and have understood the risks associated with operating it. Children must not play with the wristband. Cleaning and user maintenance must not be performed by children unless they are at least eight or more years of age and under supervision.

Safety15 WARNING!Risk of chemical burns from battery acid!Leaking battery acid may lead to chemical burns. − Do not allow battery acid to come into contact with skin, eyes or mucus membranes. − In the event of contact with battery acid, immediately flush the applicable areas with plenty of clean water and consult a physician.

Safety16CAUTION!Risk of injury!Incorrect operation may result in injury. − Do not use the wristband if it exhibits visible damages. − Do not open the housing of the display module and have qualified professionals perform repairs. Liability and warranty claims are waived in the event of repairs performed by the user or incorrect use.

Safety17NOTICE!Risk of damage!Improper handling of the wristband may result in damage. − Keep sharp objects away from the wristband. − Store the wristband so that there is no risk of it falling into a tub or sink. − Do not take the rechargeable battery out of the display module; it is firmly integrat-ed in it and cannot be replaced. − Only use the enclosed USB charger, which is connected to a computer or external power supply, to charge the empty rechargeable battery. − You can use the wristband at an ambient temperature between -10°C and +50°C. − Do not place any objects on the wristband and do not apply pressure to the display.

Checking the wristband and package contents18Avoid strong magnetic fields (e.g. transformers). Otherwise, this may cause fluctua-tions in the transmission of the data measured.Checking the wristband and package contentsNOTICE!Risk of damage!If you are not cautious when opening the packaging with a sharp knife or other pointed objects, you may damage the wristband. − Be careful when opening the package.

Functions191. Take the wristband out of the packaging.2. Remove the protective foil from the display 3.3. Check to make sure that the delivery is complete (see Fig.A).4. Check whether the wristband or individual parts are damaged. If this is the case, do not use the wristband. Contact the manufacturer at the service address specified on the warranty card.FunctionsTo reach your goals in terms of fitness, level of activity and sleep, you can use the wristband to record your level of activity and sleeping habits. In the “Steps”, “Distance” and “Calories” modes, a progress bar indicates how close you are to reaching your goals. Once you reach your goal, the corresponding progress bar will blink and a sound will be emitted. You can set your goals with the Crane Connect app. In order for you to determine the best target value, the Crane Connect app will also specify the individual limits. The wristband has the following functions:

Functions20• Time• Notiﬁcations• Measuring your pulse/workout mode• Steps • Distance• Calories• Active time• Progress check• Recording of sleep cycles with the Crane Connect app (waking up phase, light sleep phase, deep sleep phase)• Alarm function

Functions21The Crane Connect app provides a detailed view for each target value. It provides you with an itemised view of the daily recorded data. The detail view for sleep mode offers the possibility of displaying your sleep phases (waking, light sleep and deep sleep). Data storageThe wristband saves all measured data for seven days. From the 8th to 30th day, only the daily totals will be saved. If during this time you do not connect the wristband with the Crane Connect app, the first record will be overwritten by the last one on the 31st day.This data storage does not concern the workout mode. See the chapter “Pulse and workout mode” for this.

Functions22Modes The wristband has eight different modes you can choose from: Mode Symbol• Time mode• Notiﬁcation mode no notification• Pulse and workout mode• Step counter mode• Distance mode• Calorie mode

Functions23Mode Symbol• Active time mode• Sleep modeNotification modeIn the Crane Connect app, you can select when the wristband should notify you aboutstatus messages from your smartphone or tablet. You can choose fromincoming calls, calls in your absence, unread messages, unread e-mails andlost connections between the wristband and the paired smartphone/tablet.

Functions24Mode Symbol• no notiﬁcation no notification• call and missed call• message (SMS, Whatsapp, Skype, etc.)• E-mail• Bluetooth® connection interruptedTime mode Time mode is the first mode that appears on the display module. You can switch to the other modes from this mode.

Functions25To switch modes, push the menu button 4 as follows, starting in time mode: − To switch to notiﬁcation mode, push the menu button once. − To switch to pulse and workout mode, push the menu button twice. − To switch to step counter mode, push the menu button three times. − To switch to distance mode, push the menu button four times. − To switch to calorie mode, push the menu button ﬁve times. − To switch to active time mode, push the menu button six times. − To switch to sleep mode, push the menu button seven times.The display will go out automatically after three seconds. To switch it back on, push the menu button again.

Functions26Pulse and workout mode The wristband measures your pulse as soon as you access this mode. The initial pulse is always 72 beats per minute (bpm). After a few seconds, your current pulse will appear on the display. After 45 seconds, it will stop measuring your pulse and the display will automatically switch off.While your pulse is being measured, you can also access the current workout data and time in pulse and workout mode. The Crane Connect App (see chapter “Downloading and installing the Crane Connect app”) offers two possibilities for this: • Automatic alternation: All workout data and the current time are displayed in alternation for 2 seconds on the display. The display then switches off. • Manual alternation: By pushing the menu button 4, you access the workout data and the current time consecutively. After one minute, the display will automatically switch off.

Functions27You can also select further settings in the Crane Connect app. For example, you can only have certain workout data shown on the display.Your current workout data is saved in the pulse and workout mode. At the end of the workout, you can access the workout data for the last workout in pulse and workout mode: − Average pulse, − Duration of the workout, − Distance covered, − Average running time per mile (pace), − Average speed, − Steps, − Calories burned.

Functions28To monitor your pulse, the wristband records your pulse over a prolonged period of time. The period of time you defined with the desired interval can be configured or deactivated in the Crane Connect app. Step counter mode The wristband counts the steps you cover in a day. The more steps you cover during one day, the longer the progress bar at the top of the display will become. It shows you how close you are to reaching your target number of steps. Once you have reached your target number of steps, the progress bar will blink and an acoustic signal will be emitted. A daily target of 10,000 steps is set as a factory default. You can use the Crane Connect app to switch the acoustic signal on and off and change the daily target.At 12 midnight, the step counter will automatically reset to zero.If the wristband is in sleep mode, it does not count any steps.

Functions29Distance mode The wristband determines the distance you cover in one day in miles. The calculation is based on the steps counted and your individual data (step length, height, gender), which the wristband obtains from the Crane Connect app. The greater the distance you cover during one day, the longer the progress bar at the top of the display will become. It indicates current progress with respect to your target distance. Once you have reached your target distance, the progress bar will blink and an acoustic signal will be emitted. By factory default, a daily target of 3.5 miles has been set. You can use the Crane Connect app to change this setting.At 12 midnight, the distance will automatically reset to zero.If the wristband is in sleep mode, it does not calculate any distance.

Functions30Calorie mode The wristband calculates the calories you burn in a day. The calculation is based on your level of activity and your individual data (height, age, gender, weight, duration of sleep, etc.), which the wristband obtains from the Crane Connect app. The more calories you burn during one day, the longer the pro-gress bar at the top of the display will become. It shows you how close you are to reaching your daily target. Once you have burned the desired number of calories, the progress bar will blink and an acous-tic signal will be emitted. By factory default, a daily target of 3,000 calories has been set. You can use the Crane Connect app to switch the acoustic signal on and off and change the daily target. You can deter-mine the number of calories burned directly on your wristband or via the Crane Connect app.At 12 midnight, the number of calories is automatically reset to zero. Please keep in mind that calories are also burned while you sleep and the number of calories burned is recorded from 12 midnight on. Because of this, the wristband display will already show burned calories when you get up in the morning.

Functions31Active time mode The wristband calculates the amount of time you are active in hours and minutes. At 12 midnight, the activity time will automatically reset to zero.Sleep mode The wristband measures your sleep in hours and minutes. The wristband does not automatically recognise that you are sleeping – you have to activate sleep mode for this (see “Activating sleep mode”). You must wear your wristband at night so that it can record your sleep. The wristband records the duration and quality of your sleep; the Crane Connect app provides you with an anal-ysis of your sleep cycles and quality.Alarm functionYou can use the Crane Connect app to set an alarm function. Overall, you can set up to three alarms. When an alarm activates, an acoustic signal will be emitted for approx. 30 seconds;

Functions32the alarm symbol and current time will be shown in alternation on the display. − Push the menu button 4 to switch off the alarm. Compatible Bluetooth® devicesThe following devices with Bluetooth® 4.0 or higher are compatible with the wristband and the Crane Connect app:• Apple® iPhone® 4s and more recent versions• Apple® iPad® 3rdgeneration and more recent versions • Apple® iPad mini™ • Apple® iPad Air™ and more recent versions• Smartphones and tablets with Android™ 4.3 and more recent versions

Functions33You can find a complete list of supported devices online at www.cranesportsconnect.com/compatibility.

Using the wristband for the first time35Using the wristband for the first timeActivating the display module for the first time• When you activate the display module, you will feel slight resistance when you push the menu button. However, do not let go of the menu button. • The wristband must be switched on once before you can charge the recharge-able battery. Fully charge the wristband before using it for the ﬁ rst time (see chapter “Charging the rechargeable battery”).1. Hold the menu button 4 down for eight seconds.“How are you?” will appear on the display.2. Connect the rechargeable battery with a power source as described in the chapter “Charging the rechargeable battery”.3. Charge the rechargeable battery once completely before you use the wristband.

Using the wristband for the first time36Charging the rechargeable battery1. Take the display module 2 out of the band 1 (see Fig.B) or out of the clip 5.2. Insert the display module into the USB charger 6 (see Fig.C). 3. Connect the USB charger e.g. to a computer.You can also use a mains adapter with a USB port to charge it (not included in the package contents). To access the charge level of the rechargeable batteries on the display, push the menu button 4 for three seconds in time mode.The charge status is indicated using the following symbols:

Using the wristband for the first time37Symbol Charge status78–100 %56–77 %33–55 %11–32 %0–10 % − To determine if the rechargeable battery is completely empty, push the menu button. The symbol will appear on the display for three seconds.

Using the wristband for the first time38Inserting the display module − Push the display module 2 into the band 1 or the clip 5 so that it is secure and cannot fall out. You have successfully assembled the wristband and can now use it.Putting on the wristband⁄clip• We recommend that you do not wear the wristband on your dominant hand.• Your pulse cannot be measured if the display module is used in the clip. − Put the desired band 1 with the display module 2 around your wrist (ideally behind your wrist bone) and fasten the band. The band should not be ﬁ tted too tightly, but also not too loosely around your wrist. It must not cause you any pain, but it should be secure enough so as to prevent loss.

Operation39 − Or fasten the clip 5 with the display module e.g. on a trouser pocket, shirt, bra or belt.OperationSwitching the display module onOnce you have activated the wristband as described in the chapter “Activating the display module for the first time”, the chapter “Switching the display module on” is only relevant when the wristband has been switched off. − To switch the display module on, hold the menu button 4 down for 2 seconds.“How are you?” will appear on the display.

Operation40Switching the display module off1. In time mode, push the menu button 4 for  seconds. The display will show the icon, “Pair?” and “Off?”.2. As soon as “Off?” appears, push the menu button to switch the display module off.Setting the time and time modeTime mode indicates the current time. This is automatically adopted by the Crane Connect app. In the app, you can set the time mode to 24h or 12h format.Downloading and installing the Crane Connect appIf you would like to use the wristband in combination with the Crane Connect app, you must download the Crane Connect app and install it on your smartphone for example. − Download the free Crane Connect app from the App Store, from the Google Play Store at https://www.cranesportsconnect.com under the “Download” tab or via the following QR codes.

Operation41QR code for Android: QR code for iOS:To avoid long download times and the associated costs, it is recommended that you use a Wi-Fi connection for downloads. − Install the Crane Connect app on your smartphone. Follow the step-by-step instructions for this.Bluetooth

Operation42Creating a user accountTo create a user account with the Crane Connect app, proceed as follows:1. Start the Crane Connect app. 2. Follow the registration instructions step by step.3. To perform user and product-specific settings, select the icon “All Settings”.4. To create a new user or log on with an existing user, select the icon “User Settings”.Follow the subsequent instructions from the Crane Connect app step by step.You can also create new users on the website www.cranesportsconnect.com.

Operation43Connecting the wristband with the Crane Connect appMake sure that the Bluetooth® function on your smartphone has been activated. 1. Once the user settings are complete, return to the “All Settings” menu.2. Select the icon “Activity Tracker”.You can make further settings for optimal use of your wristband.3. To connect the wristband with your smartphone, select “Connect” in the “Pairing” field.A notification window will appear.4. In this window, press “Pair now”.Select “Pair?” on the display module 2 by pushing and holding the menu button 4 down for approx. two seconds in time mode. First the battery icon and then “Pair?” will appear on the display 3.

Operation445. Push the menu button again.“Pairing...” will appear for approx. 20 seconds on the display. During this time, the wristband will connect with your smartphone. Once the connection has been successfully established, the symbol will appear on the display. If the connection cannot be created, the symbol will appear on the display (see chapter “Troubleshooting”).6. Once you have successfully connected the wristband with your smartphone, return to the “Home” menu. 7. From there, you can access all the analyses of your measured data via the “Activity Tracker” icon.As soon as you have connected the wristband with the Crane Connect app, all recorded data will be transferred to it.If the Internet connection on your smartphone or tablet is active, the Crane Con-nect app will automatically upload all data measured to the website www.cranesportsconnect.com for permanent storage.

Operation45Configuring notifications1. On your smartphone or tablet, open the Crane Connect app and access the settings for the wristband.2. Scroll down to “Alert settings”.3. Activate the desired notification functions by pushing the corresponding slider to the right ( ).If you would like to configure how the wristband is to alert you of a notification, push the ar-row to the right of the slider. You now have the choice of configuring the setting for the display or the dialling tone (“Off”, “Single” or “Multiple”).You also have the option of defining the duration of the dialling tone. Use the “Duration” slider to select a duration between 1 and 5 seconds.

Operation46Notifications: Symbols and signalsTo be able to receive notifications, your smartphone or tablet must be within Blue-tooth® range.The wristband will display the last 10 notifications.If a call is received on your smartphone or if you have missed a call, the wristband will notify you with the signals configured in the app.The symbol will appear if you have enabled “Display” in the settings.If you have received a message on your smartphone, the wristband will notify you with the sig-nals configured in the app. The symbol will appear if you have enabled “Display” in the settings.If an e-mail is received on your smartphone or tablet, the wristband will notify you with the sig-nals configured in the app.

Operation47The symbol will appear if you have enabled “Display” in the settings.If the Bluetooth® connection between the wristband and smartphone or tablet is interrupted, the wristband will notify you with the signals configured in the app. The symbol will appear if you have enabled “Display” in the settings.Displaying notificationsAn interrupted Bluetooth® connection is automatically restored as soon as you are within range of your smartphone or tablet. In this case, the wristband will synchro-nise the incoming notification with the smartphone or tablet.1. In time mode, push the menu button 4 to access notification mode.• If you have received notiﬁ cations, the corresponding symbol will be shown.• If you have not received any notiﬁ cations, “No notiﬁ cation” will appear.

Operation482. Push the menu button again for 2 seconds to display the last 10 notifications.• The notiﬁcations will be displayed in chronological order.• Each notiﬁcation will be shown for 3 seconds.• You can also manually access the notiﬁcations by pushing the menu button.• Push the menu button again to return to notiﬁcation mode.Using the wristband without the Crane Connect appYou can also use the wristband without the Crane Connect app. In the process, keep in mind that the personal data of an average user is used to determine the calories burned and the distance. As a result, your actual results may differ from the determined results.Without the Crane Connect app, your data can only be shown for the current day. The data can only be permanently stored and displayed once the data has been transferred and uploaded to the website while you are connected to the Internet.

Operation49Without the Crane Connect app, you cannot adjust the factory default targets to your individual goals. The following are set as factory defaults:• Target steps: 10,000 steps• Target distance: 3.5 miles• Calorie consumption: 3,000kilocaloriesTo set the time, push the reset button 7 at 12 noon. This will set the time to 12:00.The “Notifications” function cannot be used without connecting to the Crane Connect app.

Operation50Activating pulse and workout modeIf you start the pulse and workout mode, the initial pulse of 72bpm is shown. After a few seconds, your current pulse will appear on the display. After 45 seconds, pulse measurement will stop and the display will switch off. You can also start a workout in this mode:1. To start your workout with pulse measurement, push and hold the menu button 4 down for  seconds.“Start?” will appear on the display.2. Push the menu button to start the workout.“START” will flash on the display for three seconds.You can use the Crane Connect app to select one of three preset training zones (health, fat burning and aerobic) as well as a user-defined training zone. A pulse alarm can also be activated in the app which will be triggered if your pulse is out-side the pulse range and if the max. pulse has been reached.

Operation513. To stop your workout, hold the menu button down for 2 seconds.“Stop?” will appear on the display.4. Push the menu button to stop the workout.“STOP” will flash on the display for three seconds.You can also access the current workout data while measuring the pulse. For this, the Crane Connect app allows you to select either automatic alternation or manual alternation. If automatic alternation is selected, all workout data is shown for 2 sec-onds on the display. The display then switches off. If manual alternation is selected, you can access the workout data consecutively by pushing the menu button. After one minute, the display will automatically switch off.

Operation52Viewing the workout dataOnce you have finished your workout, you can view your workout data. The wristband saves the workout data for the last ten workouts recorded. When the workout data is synchronised with the app, it is auto-matically deleted on the wristband. Only the data from the last workout can be accessed under “Record”. 1. Access the pulse and workout mode. Push and hold the menu button 4 down for  seconds.“Start?” will appear on the display.2. Wait 2 seconds.“Record” will appear on the display.3. Push the menu button to display the different workout data records.The workout data records appear in sequence every 2 seconds.Only the data from the last workout can be viewed on the wristband.If you do not synchronise the workout data of the wristband in the app, the first workout will be overwritten by the eleventh workout.

Operation53Activating sleep modeWear the wristband when you go to bed and activate sleep mode as follows:1. In sleep mode, hold the menu button 4 down for  seconds. “Sleep?” will appear on the display. 2. Push the menu button again to activate sleep mode.The icon will appear on the display. Sleep mode has now been activated. The duration and quality of your sleep will now be recorded. You can view the data collected via the Crane Connect app.• If you push the menu button now, the current time will appear on the display.• Sleep mode can also be set with the Crane Connect app so that the wristband automatically switches to sleep mode.

Operation54Deactivating sleep mode1. After waking up, hold the menu button 4 down for approx. two seconds. “Wake?” will appear on the display.2. Push the menu button to end sleep mode. The icon followed by the duration of your last sleep will briefly appear on the display.Restoring the wristbandIf the wristband does not respond, push the reset button 7 on the back of the display module 2. The display 3 will turn on after a few seconds. This will not delete the data on the wristband. Resetting the wristbandIf the data displayed on the wristband is incorrect and the wristband is connected to the app, you can reset it to the default settings in the app. To do so, access the settings for the wristband. This reset will delete all data on the wristband.

Care and maintenance55Care and maintenanceCleaning the wristbandNOTICE!Risk of damage!Improperly cleaning may lead to damage. − Do not use any aggressive cleaners, brushes with metal or nylon bristles or sharp or metallic cleaning utensils such as knives, hard scrapers and the like. They could damage the surfaces. − Use a soft brush, a small amount of water and a mild soap to clean the band 1. − Wipe the display module 2 off with a soft, damp (if necessary), lint-free cloth.

Care and maintenance56 − Let the band and display module air dry completely before storing them. − Make sure that there are no deposits on the optical sensor 8 on the bottom of the device. This will ensure an accurate pulse measurement.Storing the wristbandNOTICE!Risk of damage!Improper handling of the wristband may result in damage. − Store the wristband in a suitable location between -10°C and +50°C. − Keep the wristband away from direct sunlight. − Store the wristband in a clean, dry area.

Troubleshooting57TroubleshootingUse the following information and the FAQs (frequently asked questions) on our website to rec-tify faults yourself: www.cranesportsconnect.com/faq.phpFault SolutionNot all of the data measured were transferred. If you have not synchronised with the Crane Connect app in the last 30 days, the data measured prior to then will be overwritten.The pulse is not displayed. The optical sensor for the pulse measurement on the back of the device is dirty. Clean the optical sensor as described in the chapter “Care and maintenance”.The pulse indicator is not working properly.Your pulse is below 40 beats per minute. Make sure that the wristband is not too loose on your wrist. Put the wristband on behind your wrist bone.

Troubleshooting58Fault SolutionThe wristband and your smartphone will not connect. − Switch Bluetooth® off on your smartphone and then back on. − Then restart the connection process with your wristband. − Switch your smartphone off and then back on. − Activate the visibility of your smartphone in the Bluetooth® menu. − Reinstall the Crane Connect app on your smart-phone. − Check the compatibility (see chapter “Compatible Bluetooth® devices”).

Technical data61Measurement rangesPulse 40–225 bpmSteps 0–99999Calories 0–99999 kcalDistance 0–99.99 milesWorkout time 0–09:59:59Rechargeable batteryType: Lithium polymer rechargeable batteryCapacity: 50 mAhVoltage: 3.7 VCharging current: < 25 mA

Disposal62DisposalDisposing of the packagingDispose of the packaging separated into single type materials. Dispose of paperboard and cardboard with waste paper and films with recyclable waste.

Disposal63Disposing of the wristbandOld devices must not be disposed of with household waste!This symbol indicates that this product must not be disposed of together with domes-tic waste in compliance with the Directive (2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be disposed of at a designated collection point. The product can e.g. be returned when purchasing a similar product or by disposing of it at an authorised collection point for the recycling of waste electrical and electronic equipment. Improper handling of waste equipment may have negative consequences for the envi-ronment and human health due to potentially hazardous substances that are often contained in electrical and electronic equipment. By properly disposing of this product, you are also contributing to the effective use of natural resources. You can obtain information on collection points for waste equipment from your municipal administration, public waste disposal authority, an authorised body for the disposal of waste electrical and electronic equipment or your waste disposal company.

Disposal64Batteries and rechargeable batteries may not be disposed of with household waste! As the end user you are required by law to bring all batteries and rechargeable batter-ies, regardless whether they contain harmful substances* or not, to a collection point run by the communal authority or borough or to a retailer, so that they can be dis-posed of in an environmentally friendly manner. Turn in the battery at your collection point in a discharged state only. * labelled with: Cd = cadmium, Hg = mercury, Pb = lead

Customer service 65Customer service

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu