Leadtek Research LR9580 BlueTooth GPS User Manual Leadtek LR9580

Leadtek Research Inc BlueTooth GPS Leadtek LR9580

User manual

Leadtek GPS LR9580 Bluetooth GPS receiver Quick Installation Guide FCC CE SRRC BT 1. Package 1. LR9580 main unit *1 2. USB cable *1 3. Car charger *1 4. Quick Installation Guide *1 5. Neck eyelet strap *1
2. Specifications Technical specification Feature Item Description Chipset MT 3318f +6601 GPS single chip + Bluetooth chipset General Frequency L1, 1575.42 MHz C/A code 1.023 MHz chip rate Channels 14/32 3 meters, 2D RMS 2.5 meters 2D RMS, WAAS corrected Position <2.5 meters (50%) Velocity 0.1 meters/second Accuracy Time 1 microsecond synchronized to GPS time Default WGS-84 Datum Other selectable for other Datum Reacquisition 0.1 sec., average Hot start 1 sec., average typical TTFF Warm start 36 sec., average typical TTFF Time to First Fix (TTFF) (Open Sky & Stationary Requirements) Cold start 38 sec., average typical TTFF Altitude 18,000 meters (60,000 feet) max. Velocity 515 meters/second (1000 knots) max. Acceleration 4g, max. Dynamic Conditions Jerk 20 meters/second3, max. Main power input DC 5.0V Operation hours 10 hours in continuous mode 670 mA Power Battery Built-in Li-Polymer battery Electrical interface UARTS Serial Port Protocol messages NMEA-0183 V3.01
Environmental Characteristics Items Description Operating temperature range -10 deg. C to +50 deg. C Storage temperature range -20 deg. C to +65 deg. C Physical Characteristics Items Description Length 75.6mm ± 0.12 mm Width 28.4mm ± 0.08 mm Height 18.7mm ± 0.08 mm Weight 38 g (including rechargeable battery) Interface Specifications Items Description V1.2 compliance, class 2 Bluetooth Baud rate: 4800, 9600, 19200, 38400 USB Mini USB for charging only Software Item Description Core of firmware MTK Code type NMEA-0183 ASCII Datum WGS-84 Protocol message GGA(1sec), GSA(5sec), GSV(5sec), RMC(1sec),VTG(1sec) Output frequency 1Hz(default) up to 5Hz
Electrical Specifications Power Item Description Main power input DC 3.3~5.0V 185 mW (Acquisition mode) Power consumption 106 mW (Tracking mode) 56 mA@3.3VDC (Acquisition mode) Supply Current 32 mA@3.3VDC (Tracking mode) Battery Item Description Model Type Lithium ion Polymer Capacity 670mAh Nominal Voltage 3.7V Weight 12.6 g
3. Getting Started 3.1Charge 3.2 Power 3.3 Special design Charge with your USB cable (via PC) or Car charger (via Car cigarette) Pull the switch on to turn on LR9580. Convenient eyelet, easy to carry
3.3 LED Display LED 1 (GPS)-Green State Always on Quick blinking Slowly blinking Description Memory full to stop 3D fixed GPS signal acquisition LED 2 (Bluetooth)-Blue State Quick blinking Slowly blinking Description BT on, but not connected yet BT connected LED 3 (Power)-Red State Always on Quick blinking No Description Battery is charging Low power Battery is fully charged 3.5 Bluetooth Connection Non-slip design
Step 1 First, turn your Bluetooth device on (for example, your PDA), and activate the Bluetooth manager program. Secondly, turn the LR9580 on, and the Bluetooth LED indicator starts quick blinking. Step 2 Wait a while, tap the device name “LR9580” once it is found in your PDA, and select SPP slave to add LR9580. When password is required, enter “0000”. Step 3 Once connected, the blinking starts to get slower. Now you can start your navigation with the map software in your PDA. Note: Connecting methods for different Bluetooth devices vary, so please also refer to the manual for the specific device.
4. Safety Information GPS is operated by the US government, which is solely responsible for the system’s accuracy and maintenance. Although Leadtek GPS LR9580 is a high precision electronic NAVAID, it may still become unsafe under the circumstances of misuse or inaccurate reading. Hence there is a certain degree of risks involving the use of these products. In order to reduce the risks, please read carefully all the documentation regarding technical specifications before using Leadtek GPS LR9580. When in use, compare carefully the GPS results with all navigation information available, including that from other NAVAID, naked eye view, routes, etc. For safety reasons, it is necessary to solve all the problems before continuing to navigate. Please DO NOT shake or clash this device, and please be aware that the dust-proof and water-proof are NOT guaranteed. The rechargeable battery is built inside, so please DO NOT detach it from the device arbitrarily. Meanwhile, please DO NOT use this device under the circumstances as below: 1. In extremely hot, humid or cold environment, for example, under the direct sun or in rain 2. Near the strong magnetic field 3. In dusty weather Product ID: Leadtek GPS LR9580 Leadtek GPS LR9580 Bluetooth Receiver Installation Guide Version A March 2008 Headquarters 18F, 166 Chien-Yi Rd., Chung Ho City, Taipei County 23511, Taiwan TEL: +886(0)2 8226 5800 FAX: +886(0)2 8226 3087 http://www.leadtek.com E-mail: service_gps@leadtek.com Leadtek Research Inc.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning · This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Navigation menu