Leadtek Research LR9580 BlueTooth GPS User Manual Leadtek LR9580

Download:
Mirror Download [FCC.gov]
Document ID	940065
Application ID	5l0p+VySrcJFNCok9U0Wfw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.73kB (271614 bits)
Date Submitted	2008-05-13 00:00:00
Date Available	2008-05-13 00:00:00
Creation Date	2008-03-24 10:26:12
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-05-12 10:23:15
Document Title	Microsoft Word - Leadtek LR9580.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	1545

Leadtek GPS LR9580
Bluetooth GPS receiver
Quick Installation Guide
FCC CE SRRC BT
1. Package
1. LR9580 main unit *1
2. USB cable *1
3. Car charger *1
4. Quick Installation Guide *1
5. Neck eyelet strap *1
2. Specifications
◎Technical specification
Feature
Item
Description
Chipset
MT 3318f +6601
GPS single chip + Bluetooth chipset
General
Frequency
L1, 1575.42 MHz
C/A code
1.023 MHz chip rate
Channels
14/32
Position
3 meters, 2D RMS
Accuracy
2.5 meters 2D RMS, WAAS corrected
<2.5 meters (50%)
Velocity
0.1 meters/second
Time
1 microsecond synchronized to GPS time
Default
WGS-84
Other
selectable for other Datum
Time to First Fix
Reacquisition
0.1 sec., average
(TTFF)
Hot start
1 sec., average typical TTFF
(Open Sky &
Warm start
36 sec., average typical TTFF
Stationary
Cold start
38 sec., average typical TTFF
Dynamic
Altitude
18,000 meters (60,000 feet) max.
Conditions
Velocity
515 meters/second (1000 knots) max.
Acceleration
4g, max.
Jerk
20 meters/second3, max.
Main power input
DC 5.0V
Operation hours
10 hours in continuous mode
Battery
670 mA
Datum
Requirements)
Power
Built-in Li-Polymer battery
Serial Port
Electrical interface
UARTS
Protocol messages
NMEA-0183 V3.01
◎Environmental Characteristics
Items
Description
Operating temperature range
-10 deg. C to +50 deg. C
Storage temperature range
-20 deg. C to +65 deg. C
◎Physical Characteristics
Items
Description
Length
75.6mm ± 0.12 mm
Width
28.4mm ± 0.08 mm
Height
18.7mm ± 0.08 mm
Weight
38 g (including rechargeable battery)
◎Interface Specifications
Items
Description
V1.2 compliance, class 2
Bluetooth
Baud rate: 4800, 9600, 19200, 38400
USB
Mini USB for charging only
◎Software
Item
Description
Core of firmware
MTK
Code type
NMEA-0183 ASCII
Datum
WGS-84
Protocol message
GGA(1sec), GSA(5sec), GSV(5sec), RMC(1sec),VTG(1sec)
Output frequency
1Hz(default) up to 5Hz
◎Electrical Specifications
Power
Item
Description
Main power input
DC 3.3~5.0V
Power consumption
185 mW (Acquisition mode)
106 mW (Tracking mode)
Supply Current
56 mA@3.3VDC (Acquisition mode)
32 mA@3.3VDC (Tracking mode)
Battery
Item
Description
Model Type
Lithium ion Polymer
Capacity
670mAh
Nominal Voltage
3.7V
Weight
12.6 g
3. Getting Started
3.1Charge
Charge with your USB cable (via PC) or Car
charger (via Car cigarette)
3.2 Power
Pull the switch on to turn on LR9580.
3.3 Special design
Convenient eyelet, easy to carry
Non-slip design
3.3 LED Display
LED 1 (GPS)-Green
State
Always on
Quick blinking
Slowly blinking
Description
Memory full to stop
3D fixed
GPS signal acquisition
State
Quick blinking
Slowly blinking
Description
BT on, but not connected yet
BT connected
State
Always on
Quick blinking
No
Description
Battery is charging
Low power
Battery is fully charged
LED 2 (Bluetooth)-Blue
LED 3 (Power)-Red
3.5 Bluetooth Connection
Step 1
First, turn your Bluetooth device on (for example, your PDA), and activate the
Bluetooth manager program. Secondly, turn the LR9580 on, and the Bluetooth LED
indicator starts quick blinking.
Step 2
Wait a while, tap the device name “LR9580” once it is found in your PDA, and select
SPP slave to add LR9580. When password is required, enter “0000”.
Step 3
Once connected, the blinking starts to get slower. Now you can start your navigation
with the map software in your PDA.
Note: Connecting methods for different Bluetooth devices vary, so please also refer to
the manual for the specific device.
4. Safety Information
GPS is operated by the US government, which is solely responsible for the system’s
accuracy and maintenance. Although Leadtek GPS LR9580 is a high precision electronic
NAVAID, it may still become unsafe under the circumstances of misuse or inaccurate reading.
Hence there is a certain degree of risks involving the use of these products. In order to reduce
the risks, please read carefully all the documentation regarding technical specifications before
using Leadtek GPS LR9580. When in use, compare carefully the GPS results with all
navigation information available, including that from other NAVAID, naked eye view, routes, etc.
For safety reasons, it is necessary to solve all the problems before continuing to navigate.
Please DO NOT shake or clash this device, and please be aware that the dust-proof and
water-proof are NOT guaranteed. The rechargeable battery is built inside, so please DO NOT
detach it from the device arbitrarily. Meanwhile, please DO NOT use this device under the
circumstances as below:
1. In extremely hot, humid or cold environment, for example, under the direct sun or in rain
2. Near the strong magnetic field
3. In dusty weather
Product ID: Leadtek GPS LR9580
Leadtek GPS LR9580 Bluetooth Receiver
Installation Guide
Version A
March 2008
Headquarters
18F, 166 Chien-Yi Rd., Chung Ho City, Taipei County 23511, Taiwan
TEL: +886(0)2 8226 5800
FAX: +886(0)2 8226 3087
http://www.leadtek.com
E-mail: service_gps@leadtek.com
Leadtek Research Inc.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RF exposure warning ·
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2008:03:24 10:26:12+08:00
Modify Date                     : 2008:05:12 10:23:15+08:00
About                           : uuid:cf5b694c-dbd1-4f0e-a320-8172156979c2
Producer                        : Acrobat Distiller 6.0 (Windows)
Mod Date                        : 2008:05:12 10:23:15+08:00
Creation Date                   : 2008:03:24 10:26:12+08:00
Author                          : 1545
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2008:05:12 10:23:15+08:00
Document ID                     : uuid:38c68361-f5f4-4bb3-a1f3-c5f54e05b1d9
Instance ID                     : uuid:9f7dd772-d47a-4e59-a7bb-e4ddf9303951
Format                          : application/pdf
Title                           : Microsoft Word - Leadtek LR9580.doc
Creator                         : 1545
Page Count                      : 9
Has XFA                         : No

EXIF Metadata provided by EXIF.tools