Leadtek Research LR9705 REMOVABLE NAVIGATION DRIVE User Manual 280987 NVE P1 r13
Leadtek Research Inc REMOVABLE NAVIGATION DRIVE 280987 NVE P1 r13
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 973583 |
| Application ID | oyahLdWhXl4/K6HDc5XsDA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 95.49kB (1193672 bits) |
| Date Submitted | 2008-07-20 00:00:00 |
| Date Available | 2008-07-20 00:00:00 |
| Creation Date | 2008-07-15 10:28:21 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2008-07-15 10:28:21 |
| Document Title | 280987 NVE-P1_r13.pdf |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | gina_lo |
Removable Navigation Drive
Owner’s Manual
NVE-P1
PRECAUTIONS AND NOTICES
■ Important Information
Please Read Carefully Before Using This Product.
Use your own driving judgment in this situation,
taking into account current driving conditions.
Please be aware that in this situation the
navigation system should correct the vehicle's
position automatically. However, there may be
times where you may have to correct the position
yourself. If this is the case, pull over in a safe and
This product is not a substitute for your personal
legal manner and location before attempting
judgment. Any route suggestions made by this
operation.
navigation system may never supersede any local
8) Make certain that the volume level of the
traffic regulations or your personal judgment
navigation system is set to a level which still
and/or knowledge of safe driving practices. Do not
allows you to hear outside traffic and emergency
follow route suggestions if the navigation system
vehicles.
instructs you to perform an unsafe or illegal
maneuver, places you in an unsafe situation, or
If there is anything in the manual about the operation
routes you into an area which you consider
of the navigation system which you are uncertain
unsafe.
about, please contact your local Alpine authorized
Glance at the screen only when necessary and
safe to do so. If prolonged viewing of the screen is navigation dealer or Alpine at 1-888-NAV-HELP (1888-628-4357) before using the navigation system.
necessary, pull over in a safe and legal manner
and location.
Do not input destinations, change settings, or
access any functions requiring a prolonged view
of the monitor and/or remote control while you are
NVE-P1 has been tested and found to comply with
driving. Pull over in a safe and legal manner and
location before attempting to access the system. the limits for a Class B digital device, pursuant to part
Do not use the navigation system to route you to 15 of the FCC Rules. These limits are designed to
provide more reasonable protection against harmful
emergency services. Not all locations of
interference in a residential installation, and are more
emergency services such as police and fire
stations, hospitals and clinics are contained in the stringent than "outdoor" requirements.
This product is intended to provide turn by turn
instructions to get you to a desired destination. Please
make certain that all persons using this navigation
system carefully read these precautions and the
following instructions fully.
1)
2)
3)
4)
database. Please use your own judgment and ask
for directions in these situations.
5) The map database used in the navigation system
is the most recent map data available at the time
of production. Because of changes in streets and
neighborhoods, there may be situations where the
navigation system is not able to route you to your
desired destination. In these cases, use your own
judgment.
6) The map database is designed to provide you with
route suggestions and does not take into account
the relative safety of a suggested route or of
factors which may affect the time required to
reach your destination. The system does not
reflect road closures or construction, road
characteristics (i.e. type of road surface, slope or
grade, weight or height restrictions, etc.), traffic
congestion, weather conditions, or any other
factors which may affect the safety or timing of
your driving experience. Use your own personal
judgment if the navigation system is unable to
provide you with an alternate route.
7) There may be situations where the navigation
system displays the vehicle's location erroneously.
FCC Compliance Statement
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, you are encouraged to try to correct the
interference by one of the following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and
the receiver.
·Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
·Consult an experienced radio/TV technician.
WARNINGS
Points to Observe for Safe Usage
Read this manual carefully before using this system.
It contains instructions on how to use this product in
a safe and effective manner. Alpine cannot be
responsible for problems resulting from failure to
observe the instructions in this manual.
This manual uses various pictorial displays to show
you how to use this product safely and to alert you to
potential dangers resulting from improper
connections and operation. Following are
explanations of these pictorial displays. It is
important to fully understand the meanings of these
pictorial displays in order to use this manual and the
system properly.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete
stop. Always stop the vehicle in a safe location
before performing these functions. Failure to do so
may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from
looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric
shock.
USE THIS PRODUCT AS SPECIFIED.
Use for other than its designed application may result
in fire, electric shock or other injury.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS
IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to
the product.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage
to the product. Return it to your authorized ALPINE
dealer or the nearest ALPINE Service Center for
repairing.
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between
+45°C (+113°F) and -0°C (+32°F) before turning your
unit on.
Fuse Replacement
When replacing the fuse(s), the replacement must be
of the same amperage as shown on the fuse holder.
If the fuse(s) blows more than once, carefully check
all electrical connections for shorted circuitry. Also
have your vehicle’s voltage regulator checked.
Servicing the Unit
If you have problems, do not attempt to repair the
unit yourself. Return it to your ALPINE dealer or the
nearest ALPINE Service Station for servicing.
Installation Location
Make sure the NVE-P1 will not be exposed to:
• Direct sun and heat • Excessive dust
• High humidity
• Excessive vibrations
Characteristics of LCD Panel
• After turning the system off, a slight ghost of the
image will remain temporarily. This is an effect
peculiar to LCD technology and is normal.
• Under cold temperature conditions, the screen
may lose contrast temporarily. After a short warmup period, it will return to normal.
• The LCD panel is manufactured using an extremely
high precision manufacturing technology. Its
effective pixel ratio is over 99.99%. This means
that 0.01% of the pixels could be either always ON
or OFF.
Using Headphones
If ACC or the monitor's power source is turned off, a
loud noise may be produced through the headphone
jack. Be sure to remove the headphones from your
ears before you turn the monitor off.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may
result in fire.
USER AGREEMENT
In using this Removable Navigation Drive, NVE-P1 (hereinafter referred to as “System”), which includes Alpine
Electronics, Inc. (“Alpine”) Specifications, Space Machine, Inc. ("Space Machine") Software and NAVTEQ
North America, LLC. (“NAVTEQ”) Database, you are bound by the terms and conditions set forth below. By
breaking the seal on the System and using your copy of the System, you have demonstrated your agreement
to the terms and conditions of this Agreement. You should, therefore, make sure that you read and
understand the following provisions.
The System may not be copied, duplicated or otherwise modified, in whole or in part, without the express
written permission of Alpine, Space Machine and NAVTEQ.
The System may not be transferred or sublicensed to any third party for profit, rent or loan or licensed for
reuse in any manner.
The System may not be decompiled, reverse engineered or otherwise disassembled, in whole or in part.
The System may not be used in a network or by any other manner of simultaneous use in multiple systems.
The System is intended solely for personal use (or internal use where the end-user is a business) by the
consumer.
The System is not to be used for commercial purposes.
Neither Alpine, Space Machine nor NAVTEQ guarantees to the customer that the System meet the specific
objectives of the user.
Neither Alpine, Space Machine nor NAVTEQ shall be responsible for any damages caused by the use of the
System to the actual user and to any third party.
The warranty on the System shall not extend to an exchange or refund due to misspelling, omission of letters,
or any other cosmetic discrepancy in layout found in the System.
The right to use the System shall expire either when the user destroys this software, or when any of the terms
for use is violated and Alpine, Space Machine and/or NAVTEQ exercise the option to revoke the license to
use this software.
The terms and conditions hereof apply to all subsequent users and owners as well as to the original
purchaser.
The NAVTEQ Database may include or reflect data of licensors, including Her Majesty The Queen in right of
CANADA. Such data is licensed on an “AS IS” basis. The licensors, including Her Majesty The Queen, make
no guarantees, representations or warranties respecting such data, either express or implied, arising by law
or otherwise, accuracy or fitness for a particular purpose.
The licensors, including Her Majesty The Queen, shall not be liable in respect of any claim, demand or action,
irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages,
direct or indirect, which may result from the use or possession of the data or the NAVTEQ database. The
licensors, including Her Majesty The Queen, shall not be liable in any way for loss of revenues or contracts,
or any other consequential loss of any kind resulting from any defect in the data or the NAVTEQ database.
End User shall indemnify and save harmless the licensors, including Her Majesty The Queen and the minister,
and their officers, employees and agents from and against any claim, demand or action, irrespective of the
nature of the cause of the claim, demand or action, alleging loss, costs, expenses, damages or injuries
(including injuries resulting in death) arising out of the use or possession of the data or the NAVTEQ
database.
TABLE OF CONTENTS
PRECAUTIONS AND NOTICES . . . . . . . . . . . . . . . 2
WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . 3
USER AGREEMENT . . . . . . . . . . . . . . . . . . . . . 4
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . 5
SYSTEM FEATURES . . . . . . . . . . . . . . . . . . . . . 6
IN THE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessories . . . . . . . . . . . . . . . . . . . . . . . 8
Optional Accessories . . . . . . . . . . . . . . . . . 8
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 9
Docking with IVA-W203 and IVA-W505 . . . . . 9
Removing NVE-P1 from IVA-W203
and IVA-W505 . . . . . . . . . . . . . . . . . . . . . 9
How to Reset NVE-P1 . . . . . . . . . . . . . . . . .9
BASIC OPERATIONS . . . . . . . . . . . . . . . . . . . . 10
To Power On . . . . . . . . . . . . . . . . . . . . . 10
To Power Off . . . . . . . . . . . . . . . . . . . . . 10
Set a Destination and Go! . . . . . . . . . . . . 10
MAP FUNCTION . . . . . . . . . . . . . . . . . . . . . . . 12
Setting Estimate Time Display . . . . . . . . . 12
Setting the Map Orientation . . . . . . . . . . . 12
Repeating the Announcement . . . . . . . . . . 12
Zoom In/Out Map . . . . . . . . . . . . . . . . . . 12
GPS Status . . . . . . . . . . . . . . . . . . . . . . 12
Accessing Head Unit . . . . . . . . . . . . . . . 12
Setting a Destination Directly
from Map Display . . . . . . . . . . . . . . . . . 13
Switching Map Display . . . . . . . . . . . . . . 13
DESTINATION . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting a Destination by Address . . . . . . . 14
Confirm Destination Screen . . . . . . . . . . . 15
Setting a Destination by POI . . . . . . . . . . . 16
Setting a Destination from the
Address Book . . . . . . . . . . . . . . . . . . . . 17
Setting a Destination by Recently
Entered Destination . . . . . . . . . . . . . . . . 18
Setting a Destination by Coordinates . . . . . 18
Setting a Destination by Intersection . . . . . 19
OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Find Local Places . . . . . . . . . . . . . . . . . . 20
Saving a Destination into
the Address Book . . . . . . . . . . . . . . . . . 20
Setting Waypoints . . . . . . . . . . . . . . . . . . 21
HOME
. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Set Destination as Home . . . . . . . . . . . . . 22
Finding Alternate Way to Go Home . . . . . . 22
ROUTE
..........................
Recalling the Maneuver List
during Guidance . . . . . . . . . . . . . . . . . .
Finding Alternate Route . . . . . . . . . . . . . .
Finding Detour . . . . . . . . . . . . . . . . . . . .
Deleting Route . . . . . . . . . . . . . . . . . . . .
23
23
23
23
23
EDIT
. . . . . . . . . . . . . . . . . . . . . . . . . . .24
Editing Home . . . . . . . . . . . . . . . . . . . . . 24
Editing Address Book . . . . . . . . . . . . . . . 24
Deleting Previously Saved Destinations . . . 24
MOBILE PHONE . . . . . . . . . . . . . . . . . . . . . . . 26
Placing Calls . . . . . . . . . . . . . . . . . . . . . . 26
Receiving Calls . . . . . . . . . . . . . . . . . . . 27
Call Option Menu . . . . . . . . . . . . . . . . . . 27
SETUP
. . . . . . . . . . . . . . . . . . . . . . . . . . .28
Customizing Display . . . . . . . . . . . . . . . . .28
Customizing Guidance . . . . . . . . . . . . . . . .29
Setting up the Clock . . . . . . . . . . . . . . . . .29
Changing Unit of Measure . . . . . . . . . . . . .29
Configuring System Settings . . . . . . . . . . .29
Bluetooth Setup . . . . . . . . . . . . . . . . . . . 30
Viewing Information . . . . . . . . . . . . . . . . . 32
Simulating Navigation . . . . . . . . . . . 32
Viewing Trip Information . . . . . . . . . 32
Viewing GPS Status . . . . . . . . . . . . . 33
Viewing System Information . . . . . . . 33
IN CASE OF DIFFICULTY . . . . . . . . . . . . . . . . . 34
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . 35
INDEX
. . . . . . . . . . . . . . . . . . . . . . . . . . 36
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . 37
Congratulations and thank you for purchasing the Alpine Removable Navigation
Drive, NVE-P1. We hope you enjoy using this exciting product and trust that it will
make your driving experience more comfortable, stress-free, and entertaining. The
Removable Navigation Drive, NVE-P1 provides an easy-to-use user interface,
clear, easy-to-understand spoken driving instructions, and award winning design
all in a portable product. NVE-P1 is built upon Alpine's history of navigation
success in North America. Please read this manual carefully. If you have any
further questions about NVE-P1’s operation, feel free to call Alpine
at 1-888-NAV-HELP (628-4357) for technical assistance.
SYSTEM FEATURES
Removable Navigation Drive, NVE-P1
Power Button
Reset Button
Mini USB Connector
Volume
Control
Head Unit
Connector
External GPS
Antenna Connector
Main Menu
Set and save
Destinations.
➔ Page 14
Access your Bluetooth
paired mobile phone.
➔ Page 26
Get back home from
anywhere.
➔ Page 22
Modify or choose
alternate routes to a
destination.
➔ Page 23
Edit Home and
Address Book.
➔ Page 24
Customize the
navigation system.
➔ Page 28
IN THE BOX
■ Accessories
USB Cable
Owner’s Manual CD
Quick Reference Guide
• Registration Card
• External GPS Antenna
• External Microphone
■ Optional Accessories
The following accessories are available from your authorized Alpine dealer.
1. IVA-W203 and IVA-W505 – An Alpine AV head unit with a built-in dock to
integrate your Navigation Drive as a part of your vehicle.
3. PMD-KIT2 – A second car kit comprised of windshield mount, cradle, and
home AC charger.
4. PMD-ANT1 – An external GPS antenna hard-wired to Navigation Drive used
in instances where you cannot normally receive GPS signals inside the car,
due to metallic window tint, etc.
6. RUE-4140 – A combination navigation and audio remote control that allows
you to control most of the navigation features wirelessly.
INSTALLATION
■ Docking with IVA-W203 or IVA-W505
1 Open head unit monitor.
2 Insert into the unit with the Alpine logo facing
up and the reset button on the right.
OS
CL
3 Press firmly into place.
4 Touch Close to close head unit face.
5 Select Navigation as a source.
■ Removing NVE-P1 from IVA-W203 and IVA-W505
1 Touch Open on the screen.
2 Press the eject button.
3 Remove Navigation Drive from the head unit.
OS
CL
■ How to Reset NVE-P1
In the event the system requires a reset, pull over in a safe and legal manner before
doing so. Press the reset button on the Navigation Drive for at least 1 second. Then,
to restart the system, press and hold the power button for 2 seconds. The system
will re-start.
Note: NVE-P1 is not compatible with IVA-W205.
BASIC OPERATION
To Power On
Set a Destination and Go!
1 Select Navigation on
the Head Unit screen
2 Opening screen appears.
Touch Main Menu
Select Destination
from Main Menu.
3 Read carefully. Touch I
Accept to display map.
4 Confirmation screen
appears if a destination
was set prior to the last
shutdown. Click OK to
continue to the previous
destination.
5 The last-known current
location is indicated on
the map.
Select desired method.
(In this example, Places
is selected.)
Select a search method.
(In this example, By POI
Category is selected.)
To Power Off
Press and hold Power Button
of Head Unit for 2 seconds.
10
For Map Function, see page 12.
The following example briefly describes how to input a destination.
Scroll the list.
Select desired category.
(In this example, ATTRACTIONS
Select the place with
correct address.
is selected.)
Select the search method.
(In this example, By POI
Name is selected.)
Select OK to Proceed to
set the destination.
Type name of a place.
Map is displayed.
Follow the navigation.
If more than one place with the
same name exist, sort method
screen appears.
To Go Home, see page 22.
To Find other routes, see page 23.
11
Next Maneuver
Arrow
Next Street Name
Main Menu
Button
Distance to
next maneuver
Estimated Time
Remaining (ETR) /
Estimated Time of
Arrival (ETA)
Direction to
Destination
Map Scale Bar
Map
Orientation
Current Position
Icon and Map /
Split / Arrow
Button
Voice Prompt
Repeat Button
Current Street
Name
Setting Estimate Time Display
Click this icon to switch between
Estimated Time Remaining and
Estimated Time of Arrival.
Note: The time estimates are
based on the average speed. The
estimate time will vary depending
on vehicle speed. The arrow always
points toward the destination.
Setting the Map Orientation
Click icon to switch between North up, Heading
Up and 3D Views.
North Up
In north up view, north is always at
the top of the display. This makes it
easy to determine your current
heading with respect to the map.
Heading
Up
In heading-up view, the current
direction is always pointing to the
top of the display. This makes it
easy to see the direction of the
next turn on the map.
3D View
12
The 3D View offers you a more
realistic perspective by tilting the
map and displaying it with a horizon
line. Streets are displayed as you
approach them instead of from a
birds-eye view.
Bluetooth
Status Icon
(See page 31)
GPS Status bar
Repeating the Announcement
Click icon to repeat the guide
announcement.
Zoom In/Out Map
Click icon to display scroll bar.
Touch ▲▼ or blue bar to zoom the
map in or out.
The scroll bar disappears
automatically after 2 seconds.
GPS Status
Click icon to view GPS receiving
condition information from satellite.
Accessing the Head Unit
Click icon to access the A/V Head
Unit’s display control.
Note: If left idle for more than 5 seconds, the
system will automatically return to the navigation
screen.
■ Setting a Destination Directly from Map Display
1 Touch anywhere on map screen.
The current location arrow changes to Crosshair
Cursor on the screen.
2 Move the cursor to the new desired
street.
Note: Use Map Scale Bar to zoom out the map
if the destination is far from the current location.
3 Touch Select.
4 Select Set as Destination.
5 Touch OK to Proceed on the
confirmation screen.
Note: To use other functions on the
confirmation screen, see page 15 for details.
To cancel, touch
Previous Screen
icon.
Switching Map Display
Touch the Current Position
modes.
to switch between Map and Arrow
Arrow Mode
Map Mode
Displays threesuccessive arrow
maneuvers all the
way to your
destination while
providing turn-byturn guidance
prompts.
Shows a full-screen
map of the area while
providing turn-by-turn
guidance prompts.
Split Arrow/
Map Mode
Displays a large
arrow and larger
next-street-name
font along side a
map screen while
providing turn-byturn guidance
prompts.
13
DESTINATION
■ Setting a Destination by Address
1 Go to Main Menu
➔ Destination
➔ Address
2 Select Input City Name.
Note: You can avoid typing the city name by
selecting Recent Cities.
A list of recently entered city names will display.
Select the desired city.
3 Type the first few characters of the city
name and press OK.
If there are unique matches, the system will
automatically display a short list of city names.
Select the desired city.
4 Type the characters of the street name.
Touch OK.
The list of applicable street names appears. Select
the desired street.
5 Type the address number and touch OK.
6 Confirmation screen appears.
See page 15 for details.
14
Changing State
Selecting Letters
If you want to choose a different
state from the one shown on the
screen, touch Change to
switch to a different state.
Selected
characters
are displayed.
Delete one letter
Add one space
Type numbers
Type accentuated
characters
Type punctuation
marks
■ Confirm Destination Screen
OK to Proceed
Change Method
Option
Set the destination and
display a map.
Find an alternative way.
(Refer to page 22.)
Find Local POI ➔ P20
Set as Waypoint ➔ P21
Save in Address Book ➔ P20
Map
Call
Check the destination on the
map. Touch
to go back to
the confirmation screen.
If the phone number is available, you can call
the selected location using your Bluetooth
enable mobile phone.
(Only available on POIs and address book)
15
DESTINATION
■ Setting a Destination by POI
You can select from approximately 1.3 Million Point-of-Interest (POI) locations stored
inside your Removable Navigation Drive, NVE-P1. These destinations are sorted by POI
Name or by POI Category and are listed in order of distance from your current location.
Go to Main Menu
➔ Destination
➔ Places
Destination by POI Name
2 Select By POI Name.
3 Type the desired place name. Touch OK.
A list of place names appears.
Note: You can also perform a Keyword Search by
entering a portion of your desired place name. The list
of destinations that appears will include all place
names containing the keyword you entered.
Use the arrows to the right of the list to
move the yellow highlight.
This will show detailed address information and
phone number (if available) for each entry in the
Places database.
5 Select the place with correct address.
For emergency locations such as Police Stations,
Hospitals, etc., please verify availability before
proceeding to such locations.
6 Confirmation screen appears. Touch OK to
Proceed to set the destination and start
guidance.
16
Destination by POI Category
2 Select By POI Category.
3 Select a desired POI Category.
There are 37 POI categories to choose from
including ATMs, Banks, Gas Stations, Grocery
Stores, Hotels, Parking Lots, Restaurants and more.
4 Select Search Method.
Sort by Distance
5 Touch Near Here to see the list of places
from the current vehicle position or touch
Near Destination to see the list near your
destination.
6 Select the place
➔ OK to Proceed
By POI Name
5 Follow 3 to 5 in “Finding a Destination by POI Name” on Page 16.
Within a City
5 Type the city name and select a city.
6 The list of POIs appears in order of the
distance from the selected city. Select
the desired place.
7 Touch OK to Proceed on the confirmation screen.
■ Setting a Destination from the Address Book
1 Go to Main Menu
➔ Destination
➔ Address Book
2 Select the desired destination.
3 Confirmation screen appears.
Touch OK to Proceed to set your destination and start receiving
turn-by-turn navigation instructions. To save an address in the
address book, see page 20.
17
DESTINATION
■ Setting a Destination by Recently Entered Destination
Go to Main Menu
➔ Destination
➔ Recent
2 The list of recent destinations appears.
Select the destination.
3 Confirmation screen appears.
Touch OK to Proceed to set the destination and start guidance.
Note: To use other functions on the confirmation screen, see page 15 for details.
■ Setting a Destination by Coordinates
Go to Main Menu
➔ Destination
➔ Coordinate
2 Enter the Latitude of your destination.
Touch OK.
3 Enter the Longitude of your destination.
Touch OK.
4 Confirmation screen appears.
Touch OK to Proceed to set the
destination and start guidance.
18
■ Setting a Destination by Intersection
Go to Main Menu
➔ Destination
➔ Intersection
2 Select Input City Name.
Note: You can skip typing the city name by
selecting Recent Cities.
It displays a list of recent city names previously
entered.
3 Type the city name, then select the city
from the list.
4 Type the first street name.
Touch OK.
The list of applicable street names appears.
Select the desired street.
5 Input the second street name.
If there is only one street crossing with the first
street, the name of the street automatically
appears.
Confirm City name if there are more than 1 cites
with the same intersection.
6 Confirmation screen appears.
Touch OK to Proceed.
Note: To use other functions on the confirmation
screen, see the bottom of page 15 for details.
19
OPTIONS
■ Find Local Places
The navigation system can display Points of Interest (POI) around the cursor position,
when you scroll the map. As with POI categories, with the local places search you
can choose from 37 categories including ATMS, Banks, Gas Stations, Grocery
Stores, Hotels, Parking Lots, Restaurants and more.
How to Find Local POIs Directly from the Map
Touch anywhere on map screen.
The current location arrow changes to cross hair
cursor on the screen.
2 Touch Select.
3 Select Find Local POIs and
the desired category.
4 Select the desired place.
5 Touch OK to Proceed on the confirmation screen.
Note: To use other functions on the confirmation screen, see page 15 for details.
How to Find Local Places from the Destination Menu
You can also find local places from the Destination Menu.
1 Set a destination first from Destination
2 On the confirmation screen, touch Option.
3 Follow steps 3 to 5 above in “How to Find Local POIs Directly
from the Map”.
■ Saving a Destination into the Address Book
Any destination can be saved into the Address Book.
Select a destination using any method.
2 From the confirmation screen, select Option.
3 Touch Save in Address Book.
4 “Input Name” screen appears.
Type the desired name and touch OK.
Note: For the details of selecting letters, see page 15.
5 System returns to the Main Menu screen.
Note: To display the saved destination on the map, see
page 17, “Setting a Destination from the Address Book”.
Address book can hold up to 500 entries.
20
■ Setting Waypoints
You can set up to 10 waypoints between your current location and your destination. The
final destination must be set before entering any waypoints.
How to Set a Waypoint Directly from Map
Touch anywhere on map screen.
The current location arrow changes to cross hair
cursor on the screen.
2 Move the cursor to the desired waypoint.
3 Touch Select.
4 Select Set as Waypoint then select
Recalculate.
5 When the route search is complete, the
current location is displayed. The map
navigates you to the first waypoint.
How to Set a Waypoint from the Destination Menu
You can also find local places from Destination Menu.
1 Enter your desired destination by using the method on pages 14
through 19 from Destination Menu.
2 On the confirmation screen, select Option.
3 Select Set as Waypoint and select Recalculate.
How to Set a Waypoint from the Address Book
1 Enter in a destination from the Address Book. (see page 17)
2 On the confirmation screen, touch Option
➔ Set as Waypoint.
3 Touch Recalculate to recalculate a route which includes your
waypoint.
How to Edit a Waypoint
1 Set a waypoint by following the process above.
2 On the waypoint screen, select Edit.
3 Change the order of waypoints by touching the arrow button on the
button of the navigation screen.
Touch Delete to remove the waypoint.
4 Touch Calculate to calculate a route which includes your waypoint.
21
HOME
■ Set Destination as Home
You can get home from anywhere once the home address is set from
Destination Menu.
1 Set the destination using any desired
method.
2 On the confirmation screen, touch
Option.
3 Touch Set as Home Location.
■ Going Home
1 Go to Main Menu
➔ Home
2 Touch OK to Proceed on the
confirmation screen.
3 Follow the map and go home.
To edit the
Home Address,
See Page 24.
■ Finding Alternate Way to Go Home
Go to Main Menu
·
·
·
·
·
22
➔ Home
Maximize Highway
Minimize Highway
Shortest Route
With/Without Ferry
With/Without Toll Road
➔ Change Method
ROUTE
■ Recalling the Maneuver List during Guidance
You can view a list of street names and upcoming turns and streets.
1 Go to Main Menu
➔ Route
2 Touch Maneuver List.
3 List of upcoming streets and
turns appears on the screen.
To preview a specific point, select
a street name/maneuver on the list.
To go back to Route List,
Go to Main Menu
➔ Route
Note: For the details of setting Waypoints,
see page 21.
■ Finding Alternate Route
■ Finding Detour
Touch Main Menu
➔ Route
➔ Change Method
Touch Main Menu
➔ Route
➔ Detour
You can choose and re-calculate a different
route based on Quickest Route with
Maximize/Minimize Highway, Shortest Route,
with/without Ferry and/or Toll Road.
The system automatically
calculates and displays detour.
■ Deleting Route
Go to Main Menu
➔ Delete ➔ Yes
➔ Route
Note: After deleting the destination, you can not
select Route Menu until the next destination is set.
To set up the destination, see Destination Menu on
Page 14.
23
EDIT
Locations and Home addresses saved in the Address Book can be edited for quick
recall. Also information including phone numbers and icons can be modified.
■ Editing Home
1 Go to Main Menu
➔ Edit
2 Touch Edit Home.
3 “Edit Home” screen appears.
See page 25 for details.
■ Editing Address Book
1 Go to Main Menu
➔ Edit
2 Touch Edit Address Book
3 The list of addresses appears.
Select the destination you need to modify.
4 “Edit Address Item” screen appears. See page 25 for details.
Note: Select DELETE ALL to delete all addresses saved in the address book.
■ Deleting Previously Saved Destinations
1 Go to Main Menu
➔ Edit
2 Touch Delete Previous Destination.
3 Select destination you need to delete.
4 Touch YES to delete the destination on the confirmation screen.
Note: Select DELETE ALL to delete all recently entered destinations.
24
Name
Touch Name to change the
display name of the stored
location.
Note: For the details of selecting letters, see
page 15.
Input Name Screen
Tel
Touch Tel to change the
telephone number of the stored
location.
Map
Touch Map to preview the
location on the map.
To go back to Edit Menu,
Main Menu
Edit Telephone Screen
➔ Edit
Delete Touch Delete to delete the stored
location.
Icon
Touch Icon to change the icon of
the stored location on the map.
Change Icon Screen
Delete Screen
25
MOBILE PHONE
Most Bluetooth enabled mobile phones can be synchronized to interface with
Navigation Drive. Once you have paired and synchronized your mobile phone with
Navigation Drive (see Setup on page 30) you can place and receive calls in addition
to many other convenient functions. Some Bluetooth enabled phones may not be
compatible and some features may not be available even after synchronizing and
pairing.
Note: It may take a few minutes for information to transfer from your phone to
Navigation Drive.
■ Placing Calls
1 Touch Main Menu
2 Touch Phone
Using the 12 key Dial Pad
3 Touch Dial.
4 Enter the number and touch Call.
Using your Phonebook
(If your phone has not been synchronized, see setup
instructions on page 30.)
3 Touch Phonebook.
4 Begin entering the name of the contact
you wish to call.
A list will appear.
5 Select the desired contact from the list.
Confirmation screen appears with the contact’s
detailed information.
X-XXX-XXX-XXXX
X-XXX-XXX-XXXX
X-XXX-XXX-XXXX
X-XXX-XXX-XXXX
X-XXX-XXX-XXXX
6 Touch Dial to place the call.
Using Dialed, Missed, or Received Calls from
your call history
X-XXX-XXX-XXXX
3 Touch Dialed Calls, Missed Calls,
or Received Calls.
A list of your call history will appear.
4 Select the desired contact from the list. Confirmation screen
appears with the contact’s detailed information if available.
5 Touch Dial to place the call.
Note: You can continue to use Navigation Drive during an active call. Touch the
icons to jump to the Map or Main Menu screens. Touch the green phone icon to
return to the call menu.
26
■ Receiving Calls
When your mobile phone is actively paired with Navigation Drive, a pop-up window
will appear when you have an incoming call. The caller ID number will be displayed
when available. Touch Answer to accept the call or Ignore to ignore it.
■ Call Option Menu
During an active call touch the green phone icon
to access the Call Option
Menu. This menu displays the Caller ID Name, Phone Number, and Call Duration.
The following options are also available from this menu:
Mute
This allows you to temporarily mute the microphone so you can still hear the caller,
but the caller cannot hear you.
Transfer Call to Phone
You can transfer the call from Navigation Drive to your mobile phone for greater
flexibility.
End Call
This ends the current phone call.
Note: After ending a call you will automatically be returned to the previous menu.
27
SETUP
You can customize Display, Guidance, Clock,
Measuring Unit and FM frequency settings from the
Setup Menu.
Go to Main Menu
2 Select Setup
3 Setup screen appears.
■ Customizing Display
Go to Main Menu
➔ Setup
➔ Display
Setting the Map Color
Day - a bright tone screen
Night - a dark tone screen
Auto - switches automatically between
Day and Night modes
Map Style
1 - Geographic features displayed
light brown colors (Default)
2 - Geographic features displayed
dark brown colors
3 - Geographic features displayed
light gray colors
4 - Geographic features displayed
dark gray colors
in
in
in
in
Background Color
You can select from 4 background
colors (blue, green, purple and black) for
all menu screens.
Displaying and Editing Icons on the
Map
POI Icons, the Home Icon and Icons
used in the Address Book can be turned
on and off from the Display Setup Menu.
You can also change these icons.
28
Trail
The Trail feature allows you to turn on
and off trail dots that appear wherever
the vehicle icon traverses. This is
especially helpful for off-road
enthusiasts.
Display Adjustment
The Adjust button is active only when
Navigation Drive is docked. It will allow
you to make minor alignment
adjustments (up/down/left/right) to the
display of the docked image.
■ Customizing Guidance
Turning Voice On and Off
This allows you to turn ON or OFF guidance voice
prompts.
Changing Navi Mix Volume
This allows you to vary the volume of the voice
prompts with respect to the music.
Setting Estimate Time Display
Estimated Time of Arrival (ETA) or Estimated Time Remaining (ETR) can be set here.
You can also change between ETA and ETR directly in the map screen. See page 12.
■ Setting up the Clock
You can set the Time Zone and Daylight Saving
setting to fit your region.
■ Changing Unit of Measure
You can choose the unit of measure between Miles
and Kilometers.
■ Configuring System Settings
Reset All Settings
This allows you to delete all stored information and
default back to the original factory settings.
29
■ Bluetooth Setup
Bluetooth enabled mobile phones can be paired to interface with Navigation Drive.
You can customize this interface using the Bluetooth Setup controls.
1 Go to Main Menu
2 Select Setup
3 Select Bluetooth.
The Bluetooth Setup menu appears and displays
the setup options. Use the large arrow button
at the bottom of the screen to view additional
options. All Bluetooth setup options are
detailed below.
Turning Bluetooth On and Off
This allows you to turn the Bluetooth functionality on or off.
Starting Discover Mode
Discover Mode allows your mobile phone to pair with Navigation Drive. Start
Discover mode to begin the initial pairing process. Follow your individual phone’s
instructions for pairing.
Auto Connect
Turning Auto Connect on will allow the last connected phone to automatically
connect with the Navigation Drive whenever they are in range and both have
Bluetooth turned on.
Auto Answer
This allows Navigation Drive to automatically answer
all incoming calls for you after the first ring.
Phonebook
This allows to store your phone address into
Navigation Drive.
Changing Device Name
Navigation Drive’s display name can be set here by selecting Change.
30
Changing Device Passkey
The passkey used to pair Navigation Drive with your
mobile phone can be changed here.
Bluetooth Indicator
The following icons indicate the Bluetooth status:
No Icon
When Bluetooth is OFF, the icon does not appear.
When Bluetooth is on, but not paired, the gray icon appears.
By pressing the icon, “Discover Mode” screen appears.
When Bluetooth is on and connected, the blue icon appears.
By pressing the icon, “Call” screen appears.
When a phone call is active, a green phone icon appears.
Pairing Your Mobile Phone with Navigation Drive
1 Go to Bluetooth Setup and turn on Bluetooth.
2 Start Discover Mode.
3 On your mobile phone, make sure Bluetooth is on, then search
for Bluetooh devices.
4 Select Navigation Drive name and enter the passkey shown on
the Navigation screen.
5 The bluetooth icon appears in blue, indicating your mobile phone
is connected.
31
■ Viewing Information
Simulating Navigation
You can watch a demonstration of the navigation system’s voice and screen guidance.
Note: Set your destination first before using this function.
To Start a Demonstration
1 Setup a route.
2 Go to Main Menu
3 Go to Setup
4 Select Information.
5 Select Start Demo.
6 Demonstration starts.
To Stop a Demonstration
1 Follow 2 through 4 of "To Start a
Demonstration".
2 Select Stop Demo.
3 The demonstration will end.
Viewing Trip Information
The odometer displays the route distance
and time traveled.
1 Go to Main Menu
2 Go to Setup
3 Select Information.
4 Select Trip Info.
Driving Average Average speed since Trip Info was reset.
Overall Average Average speed since start of trip.
Maximum Speed Maximum speed reached on this trip.
32
Driving Time
Time vehicle has been moving since the trip was reset.
Idle Time
Time vehicle has been stopped (not moving) since the trip was reset.
Total Time
Total elapsed time on the trip which is always the driving time plus idle time
Viewing GPS Status
You can view the dynamic location information
received from satellite such as signal strength,
compass (direction information), latitude/longitude,
approximate altitude, and speed. This feature
allows you to view GPS satellite signal information.
An explanation of the messages is shown below.
1 Go to Main Menu
2 Go to Setup
3 Select Information.
4 Select GPS Status.
The following messages are displayed while the GPS receiver is tracking satellites:
“Locating GPS Satellites”: Navigation
Drive searches the sky looking for GPS
satellites.
“Acquiring GPS Signal”: Navigation Drive
acquires positioning information transmitted
from 1 to 3 tracked satellites while
searching for more satellites (minimum 4
needed).
“Fixing GPS Position”: Navigation Drive
requires continuous signals from 4 or more
tracked satellites (for 30 seconds) in order
to accurately fix your position.
“Temporary Poor GPS Coverage”:
Thunderstorms, dense foliage or
surrounding tall buildings may cause
temporary loss of position fix (acceptable if
under 30 seconds).
“Poor GPS Signal, Lost Position Fix”:
You may have entered an area where
consistently poor GPS signal (lasting 30
seconds or more) makes it impossible to
maintain a position fix.
“No Line of Sight, Lost GPS Tracking”:
You are in an area where line of sight to
GPS satellites has been blocked.
Viewing System Information
You can check software application, database
version, and other information in this screen.
Make a note of this information and refer to it
whenever you communicate with Alpine Tech
Support or your Alpine authorized dealer.
1 Go to Main Menu
2 Go to Setup
3 Select Information.
4 Select System Info.
33
IN CASE OF DIFFICULTY
If you encounter a problem, please review the items in the following checklist. This guide
will help you isolate the problem if the unit is at fault. Otherwise make sure the rest of your
system is properly connected, batteries are completely charged and contact your
authorized Alpine dealer or Alpine directly at 1-888-NAV-HELP (1-888-628-4357).
Unable to use Phone feature.
Some Bluetooth enabled phones may not be compatible and some features may not be
available even after synchronizing and pairing.
The vehicle’s position is erroneous.
Reset the unit and drive the vehicle in an area of good GPS reception to allow the unit
to recalibrate itself. Move to a location where strong GPS reception is possible.
No operation
· Moisture condensation ➔ Allow enough time for the condensation to evaporate
(about 1 hour).
· Ambient temperature ➔ Lower the temperature in the vehicle to below 113°F (45°C)
over 113°F (45°C)
by driving with the windows open or air conditioner on.
· Blown fuse
➔ Replace with a fuse of the prescribed rating. (2A glass-type
fuse located in the head of the cigarette lighter adapter)
Unit does not work after removing from cradle or dock
*Make sure battery is fully charged. Unit does not charge in cradle or dock while the car
is not on.
The unit is taking a long time to acquire GPS signal.
It may take a long time for the unit to acquire GPS signal if it has been powered on in
an area that is more than 200 miles from the area where it was last powered off.
Following these steps will speed the process by resetting the GPS receiver:
1 Go to GPS Status screen. (See instructions on page 34)
2 Press and hold the Down Arrow (Map Zoom Out Button) for 2 seconds.
3 A message appears to indicate that the GPS receiver is resetting.
■ How to Update the New Software and Map Database
Using your home PC, Navigation Drive can be updated with the latest
mapping and Point of Interest information. Please refer to instructions
included with the update software on how to upgrade your Navigation
Drive.
For additional information on the update software, please contact Alpine.
34
SPECIFICATIONS
Main Unit Size
6.1” x 2.9” x 1.0” (145mm x 73mm x 26mm)
Main Unit Weight
4.4 oz (120 g)
CPU
Centrality Atlas III ARM9 CPU
GPS
Embedded 16 channel GPS, Built-In Main Unit Antenna with Optional External Antenna
Connection
Storage Media
Built-In memory with Pre-Loaded Maps of US* and Canada and 1.3 Million Points of
Interest Locations
USB Interface
2.0
Power Requirements 5V 1A
Operating Temp
14˚F to 158˚F (-10˚C to +70˚C)
Storage Temp
4˚F to 185˚F (-20˚C to 85˚C)
Resolution
QWVGA 400 x 234 pixels
Note: Due to continuous product improvement, specifications are subject to change without
notice.
35
INDEX
Accessories
Address book
Announcement
20
12
Background Color
Basic Operation
Bluetooth
Setup
28
10
30
26, 30
Call
Ending
Muting
Placing
Receiving
Clock
Confirm Destination Screen
Coordinates
Customizing
Display
Guidance
26, 27
27
27
26
27
29
15
18
28
29
Deleting
Route
Saved Destination
Destination
Setting by Address
Setting by Coordinates
Setting by Intersection
Setting by POI
Setting by Previous Destination
Setting from the Address Book
Setting From Map Display
Detour
23
25
14
18
19
16
18
17
13
23
24
24
24
24
12, 29
FCC Compliance Statement
GPS Status
12, 33
Home
Editing
Finding a Way
Finding Alternate Way
22
24
22
22
Icon
In Case of Difficulty
Index
Information
GPS Status
Simulating Navigation
36
33
32
Maneuver List
Recalling during Guidance
Map Color
Map Display
Map Function
Announcement
Battery Status
Estimate Time Display
GPS Status
Map Display
Map Orientation
Set a Destination
Zoom In/Out Map
Map Orientation
Measuring Unit
23
28
13
12
12
12
12
12
13
12
13
12
12
29
POI
Local POI
Power
Precautions And Notices
24, 27
34
36
32
33
32
16, 17
20
10
Repeating the Announcement
Reset
Route
Alternate Route
Delete Route
Detour
Recalling the Maneuver List during
Guidance
Saving a Destination into the Address
Book
Set a Destination and Go!
Setup
Clock
Display
Guidance
Measuring Unit
System Settings
Simulating Navigation
Specifications
System
Features
Information
Settings
12
23
23
23
23
23
20
10
28
29
28
29
29
29
32
35
33
29
Table of Contents
Trail
Trip Information
Troubleshooting
Update
User Agreement
28
32
34
34
Voice
Volume
Edit
Address Book
Deleting Saved Destination
Home
Estimate Time Display
System Information
Trip Information
Installation
29
29
Warnings
Warranty
Waypoints
37
21
Zoom In/Out Map
12
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are
pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer
or contact Alpine at one of the telephone numbers listed below.
●PRODUCTS COVERED:
This Warranty covers Car Audio, Navigation Products and
Related Accessories ("the product"). Products purchased in the
Canada are covered only in the Canada. Products purchased in
the U.S.A. are covered only in the U.S.A.
●LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first
consumer purchase.
2 You should provide a detailed description of the problem(s) for
which service is required.
3 You must supply proof of your purchase of the product.
4 You must package the product securely to avoid damage
during shipment. To prevent lost packages it is recommended
to use a carrier that provides a tracking service.
●HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE
AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE
●WHO IS COVERED:
This Warranty only covers the original purchaser of the product, PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE AND
NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY
who must reside in the United States, Puerto Rico or Canada.
OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE
●WHAT IS COVERED:
PRODUCT.
This Warranty covers defects in materials or workmanship (parts
●HOW WE EXCLUDE CERTAIN DAMAGES:
and labor) in the product.
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL
●WHAT IS NOT COVERED:
AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT.
This Warranty does not cover the following:
THE TERM "INCIDENTAL DAMAGES" REFERS TO EXPENSES OF
1 Damage occurring during shipment of the product to Alpine
TRANSPORTING THE PRODUCT TO THE ALPINE SERVICE
for repair (claims must be presented to the carrier).
CENTER, LOSS OF THE ORIGINAL PURCHASER'S TIME, LOSS
2 Damage caused by accident or abuse, including burned voice OF THE USE OF THE PRODUCT, BUS FARES, CAR RENTALS OR
coils caused by over-driving the speaker (amplifier level is
OTHERS COSTS RELATING TO THE CARE AND CUSTODY OF
turned up and driven into distortion or clipping).
THE PRODUCT. THE TERM "CONSEQUENTIAL DAMAGES"
Speaker mechanical failure (e.g. punctures, tears or rips).
REFERS TO THE COST OF REPAIRING OR REPLACING OTHER
Cracked or damaged LCD panels. Dropped or damaged hard PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES
drives.
NOT WORK PROPERLY.
3 Damage caused by negligence, misuse, improper operation or THE REMEDIES PROVIDED UNDER THIS WARRANTY ARE
failure to follow instructions contained in the Owner's manual. EXCLUSIVE AND IN LIEU OF ALL OTHERS.
4 Damage caused by act of God, including without limitation,
●HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY:
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of This Warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
the product.
province. In addition, some states/provinces do not allow
5 Service performed by an unauthorized person, company or
limitations on how long an implied warranty lasts, and some do
association.
6 Any product which has the serial number defaced, altered or not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, limitations as to these
removed.
matters contained herein may not apply to you.
7 Any product which has been adjusted, altered or modified
without Alpine's consent.
8 Any product not distributed by Alpine within the United States,
Puerto Rico or Canada.
9 Any product not purchased from an Authorized Alpine Dealer.
●HOW TO OBTAIN WARRANTY SERVICE:
1 You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair and for
payment of any initial shipping charges. Alpine will, at its
option, repair or replace the product with a new or
reconditioned product without charge. If the repairs are
covered by the warranty, and if the product was shipped to an
Authorized Alpine Service Center or Alpine, Alpine will pay the
return shipping charges.
●IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product
has been installed in your vehicle by an Authorized Installation
Center, and this warranty stamped upon installation by the
installation center.
●HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO 1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION 1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC.,
19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC.,
777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-416-736-6211
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
© 2006 NAVTEQ. All Rights Reserved.
© 2006 Alpine Electronics of America, Inc. All Rights Reserved.
The WTR Logo is a trademark of the
Consumer Electronics Association.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two
conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause
undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by
the part responsible for compliance could void the user’s authority to operate the equipment.
ϘOperation is subject to the following two conditions:(1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.”
This Class B digital apparatus complies with Canada RSS-210. Cet appareil numérique de la
classe B est conforme à la norme CNR -210 du Canada
The abbreviation, IC, before the registration number signifies that registration was performed
based on a Declaration of Conformity indicating that Industry
Canada technical specifications were met. It does not imply that Industry Canada approved
the equipment.(DoC) The term “IC:” before the certification/registration
number only signifies that the Industry Canada technical specifications were met.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2008:07:15 10:28:21+08:00 Modify Date : 2008:07:15 10:28:21+08:00 Page Count : 38 Creation Date : 2008:07:15 02:28:21Z Mod Date : 2008:07:15 02:28:21Z Producer : Acrobat Distiller 5.0 (Windows) Author : gina_lo Metadata Date : 2008:07:15 02:28:21Z Creator : gina_lo Title : 280987 NVE-P1_r13.pdfEXIF Metadata provided by EXIF.tools