Lee Technology Korea LTK-1300HR PAGING TRANSMITTER User Manual

Lee Technology Korea Co., Ltd. PAGING TRANSMITTER

USERS MANUAL

OPERATIONAL MANUAL (LTK-1300HR) LEE TECHNOLOGY KOREA CO., LTD. FCC ID : QBTLTK-1300HR Trade Name : Pager Transmitter Model No. : LTK-1300HR THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
IMPORTANT SAFETY INFORMATION RF EXPOSURE STATEMENT Your Pager Transmitter contains a radio frequency transmitter. When the button is pushed the transmitter sends our RF signals. CAUTION : To comply with FCC RF exposure compliance requirements, a separation distance of at least 25mm must be maintained between the antenna of this transmitter and all persons, during normal operation. The antenna used for this transmitter must not be co- located or operating in conjunction with any other antenna of transmitter. Unauthorized antennas, modifications, of attachments could damage the transceiver and may violate FCC regulations.
SPECIFICATION z Pocsag Code z Frequency Range: 450.0000MHz ~ 470.0000MHz z FM modulation & FSK (frequency shift keying) z Deviation: 4.5KHz z FM Accuracy : +/-5% 4.275< 4.5 < 4.725 z Date Rate: 512 BPS, 1200BPS, 600Hz +/-5Hz z Message: Numeric: Max. 12 digits z Address Range: 0001 to 1249
Please read this manual thoroughly to familiarize yourself with the procedures for proper care of your system. We are confident our cutting edge products and first rate service will satisfy your needs for years to come. 1. To Page To page the pager, press one of the numbers (①, ②, ③, ④). The transmitter number and button number will be sent. Ex) Press the number ① : The button number + transmitter number will be sent. ※ Detailed information for the button : ① Picture [ Press the number ① : The button number (Picture) + transmitter number will be sent. ] ② Sound [ Press the number ② : The button number (Sound) + transmitter number will be sent. ] ③ Piracy [ Press the number ③ : The button number (Piracy) + transmitter number will be sent. ] ④ Other Disturbance [ Press the number ④ : The button number (Other Disturbance) + transmitter number will be sent. ] 2. Setup Mode 1) Transmitter Number Setup Mode. (1) To enter the Transmitter Number Setting : Press the number ① and ③ at the same time, and then NO>__ will be displayed on the LCD screen. The available Transmitter Number is from 00 to 99. (2) Transmitter Number Setting : Press the number ① to change the first digit number placed at the left side, Press the number ② to change the second digit number placed at the right side. Press the number ④ to exit to the initial screen.
Troubleshooting Charge light will not come on a. Make sure there is power to the outlet b. Try changing the position of the Transmitter on the charger base. c. Check all connections on charger bases. Transmitter will not display anything a. Make sure there is power to the outlet b. Check all connections. If you try all this and the transmitter still wont power up your power supply may be bad. If display is still blank, call us Before you call, try some of the following suggestions… *Remember that the capability of your system will be affected by: Foil backed wallboard, Metal mesh, wire reinforced glass, metal sheeting, large mirrors, suspended ceilings, lift shafts etc. These can all reflect and thereby reduce the signaling capability of the transmitter. A little forethought prior to installation, coupled with a few tests, can normally avoid most of these problems. 1.Read through the manual. Answers to most questions can be found there. A trouble shooting section further assists you in diagnosing the problem. 2. IMPORTANT NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment not expressly approved by LEETEK may void the FCC authorization to operate this equipment. 3. CAUTION : Never use any cleaner other than alcohol for the maintenance of this equipment. Organic solvent such as benzene, toluene or acetone may spoil the plastic parts of this equipment. 4.RF Radiation Exposure This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with a minimum distance of 25mm between the radiator and your body. 5.Do not subject this equipment to: 1)Mechanical shock 2)Excessive humidity or moisture 3)Extremes of temperature 4)Corrosive liquids 6.Warning ! No user serviceable parts Alteration or modification to any part of this equipment, without the prior written consent of the manufacturer, will invalidate all manufacturer approvals and warranty. No adjustments can be undertaken except by qualified and licensed persons as defined by the FCC Rules and Regulations. Operation of altered equipment can result in fines, imprisonment, and /or confiscation of such equipment.
I need to send some transmitter in for repair - What do I do? Within warranty period / Covered by our Product-Care Program: Ship malfunctioning components to the following address: 3rd FL, #499-2 Sang 3-dong, Wonmi-gu, Puchon-city, Kyunggi-do, Korea Tel: 82-32-678-8605 Fax: 82-32-324-9840 1. Pack the components securely 2. Enclose a note with a brief description of the problem 3. Include a business card 4. Ship the equipment in a traceable manner for your protection. (ie UPS, EMS, Fedex, etc). 5. Insure the shipment for replacement value. There are no charges for repaired equipment within the warranty period, or if covered by WARRANTY LeeTek warrants this product against any defects that are due to faulty material or workmanship for a one-year period after the original date of consumer purchase. This warranty does not include damage to the product resulting from accident, misuse or improper electrical connection. Power supplies are warranted for 60 days. We recommend the use of a surge protector with all equipment. If this product should become defective within the warranty period, we will repair or replace with equivalent product, free of charge. We will return your product, transportation charges prepaid standard shipping mode, provided the product is shipped prepaid to: LEETEK, 3rd FL #499-2 Sang 3-dong, Wonmi-gu, Pucheon-city, Kyunggi-do, KOREA No return will be received without prior authorization and the proper RMA # posted to the outside of the shipping container. This warranty gives you specific legal rights and you may also have rights which vary from state to state.
Product-Care, other than your shipping costs. We will pay shipping one way back to you. The high rate courier service is available at an additional charge. Hints and Tips Training is the key to success with a paging system. Orientating your entire staff and training your host staff on the use of the paging system is key to the success of the system. As a part of the general host training program, time must be set aside to teach new hires about the use and care of the paging system. Be certain staff members understand the importance of asking for the transmitter back after work. Benefits of a VISUAL paging system Staff members are alerted thru the pager and know to quickly close the tab of a guest to help speed table turns. LEE TECHNOLOGY KOREA CO., LTD.

Navigation menu